<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0"><channel><title><![CDATA[Awls and Chisels for LM Charge, Wave, Surge]]></title><description><![CDATA[<p dir="auto">Raukodur and Znapschatz were both pointing out how important an awl blade is on a multitool, and how Leatherman should have included one on the Charge. Raukodur suggested the idea of making a special awl bit for the flattened hex driver. Great idea! I would have NEVER thought of that myself.... :P</p>
<p dir="auto">The first one I made worked, sort of, but it was a full 1/4" hexagon, which doesn't fit into the handy Leatherman bit kit. This new one is way better, and WAY easier to make.</p>
<p dir="auto"><img src="http://img.photobucket.com/albums/v307/jooliesews/Bobbys/ab1.jpg" alt="" class="img-markdown  img-fluid" /><br />
I started with a 5/16" spade bit, used for boring holes in wood. These things are available for less than $2 apiece at every neighborhood hardware store. (Well, in MY neighborhood anyhow.)</p>
<p dir="auto"><img src="http://img.photobucket.com/albums/v307/jooliesews/Bobbys/ab2.jpg" alt="" class="img-markdown  img-fluid" /><br />
The beauty part here is that the spade bit already has a nice sharp awl-point on the end, it is already the right thickness to fit into the Leatherman bit driver socket, and it is &lt;u&gt;almost&lt;/u&gt; the right width. Very little grinding required.</p>
<p dir="auto"><img src="http://img.photobucket.com/albums/v307/jooliesews/Bobbys/ab3.jpg" alt="" class="img-markdown  img-fluid" /><br />
First thing I did was grind away the little tips on both flutes of the drill. I wanted the awl to extend full length, to a big point. It was a simple matter to match my grinding to the existing angle on the point.</p>
<p dir="auto"><img src="http://img.photobucket.com/albums/v307/jooliesews/Bobbys/ab4.jpg" alt="" class="img-markdown  img-fluid" /><br />
Next I very carefully ground on the edges, doing my best to match the inside contour of the bit driver socket. It's not that difficult. Go slow, sneak up on the final size carefully, and check the fit often. The goal is to have it *just barely * fit into the socket.</p>
<p dir="auto"><img src="http://img.photobucket.com/albums/v307/jooliesews/Bobbys/ab5.jpg" alt="" class="img-markdown  img-fluid" /><br />
Last thing to do is cut the finished awl bit off from the shank, and grind the other end to finished length. I made mine the proper length to fit in the bit kit holder. The drill bit steel is very hard, so I used a dremel cut-off disk for the task. Grinding it off too long, then grinding back to length with a bench grinder would work if no Dremel were available.</p>
<p dir="auto">On the way home from work, I stopped and bought another $2 spade drill bit. Tomorrow I'm going to make it into a chisel blade!</p>
<p dir="auto">~Bob</p>
]]></description><link>https://multitool.ninja/topic/1111/awls-and-chisels-for-lm-charge-wave-surge</link><generator>RSS for Node</generator><lastBuildDate>Mon, 16 Nov 2026 05:59:54 GMT</lastBuildDate><atom:link href="https://multitool.ninja/topic/1111.rss" rel="self" type="application/rss+xml"/><pubDate>Wed, 11 Apr 2007 03:57:04 GMT</pubDate><ttl>60</ttl><item><title><![CDATA[Reply to Awls and Chisels for LM Charge, Wave, Surge on Tue, 12 Jul 2016 11:57:32 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/j-sews" aria-label="Profile: J-sews">@<bdi>J-sews</bdi></a> <a href="/post/1301738">said</a>:</p>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/poncho65" aria-label="Profile: Poncho65">@<bdi>Poncho65</bdi></a> <a href="/post/1283076">said</a>:</p>
<blockquote>
<p dir="auto">I was a necrothreader even back in the day :o 8)</p>
</blockquote>
<p dir="auto">Ponch, you're such a necrothreader :D</p>
</blockquote>
<p dir="auto"><img src="/assets/uploads/smileys/hatsoff.gif" alt=":hatsoff:" title="Hats Off" class="forum-smiley emoji" /> I love a lot of these old threads for sure :D</p>
]]></description><link>https://multitool.ninja/post/1301839</link><guid isPermaLink="true">https://multitool.ninja/post/1301839</guid><dc:creator><![CDATA[Poncho65]]></dc:creator><pubDate>Tue, 12 Jul 2016 11:57:32 GMT</pubDate></item><item><title><![CDATA[Reply to Awls and Chisels for LM Charge, Wave, Surge on Tue, 12 Jul 2016 11:21:24 GMT]]></title><description><![CDATA[<p dir="auto">Funny enough, last night I took a punchdown tool extension (<a href="https://www.amazon.com/Klein-Tools-VDV427-018-Punchdown-Extension/dp/B007GRTGIM" rel="nofollow ugc">https://www.amazon.com/Klein-Tools-VDV427-018-Punchdown-Extension/dp/B007GRTGIM</a>) and cut a shank into it to fit in my modded RAVE.</p>
<p dir="auto"><a href="http://s237.photobucket.com/user/aberdrew13/media/Mobile%20Uploads/20160711_171937_zps0plvilot.jpg.html" rel="nofollow ugc"><img src="http://i237.photobucket.com/albums/ff210/aberdrew13/Mobile%20Uploads/20160711_171937_zps0plvilot.jpg" alt="" class="img-markdown  img-fluid" /></a></p>
<p dir="auto"><a href="http://s237.photobucket.com/user/aberdrew13/media/Mobile%20Uploads/20160711_171948_zpspgm5zovq.jpg.html" rel="nofollow ugc"><img src="http://i237.photobucket.com/albums/ff210/aberdrew13/Mobile%20Uploads/20160711_171948_zpspgm5zovq.jpg" alt="" class="img-markdown  img-fluid" /></a></p>
<p dir="auto">It appears that I forgot to snap a pic of the final product, but I finished shaping it and even blued the cut areas with some gun blue.</p>
<p dir="auto">Now I will have a punchdown tool with me all the time when I carry my RAVE, just not an impact one.</p>
]]></description><link>https://multitool.ninja/post/1301813</link><guid isPermaLink="true">https://multitool.ninja/post/1301813</guid><dc:creator><![CDATA[Aberdrew13]]></dc:creator><pubDate>Tue, 12 Jul 2016 11:21:24 GMT</pubDate></item><item><title><![CDATA[Reply to Awls and Chisels for LM Charge, Wave, Surge on Tue, 12 Jul 2016 05:40:59 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/poncho65" aria-label="Profile: Poncho65">@<bdi>Poncho65</bdi></a> <a href="/post/1283076">said</a>:<br />
I was a necrothreader even back in the day :o 8)</p>
</blockquote>
<p dir="auto">Ponch, you're such a necrothreader :D</p>
]]></description><link>https://multitool.ninja/post/1301738</link><guid isPermaLink="true">https://multitool.ninja/post/1301738</guid><dc:creator><![CDATA[J-sews]]></dc:creator><pubDate>Tue, 12 Jul 2016 05:40:59 GMT</pubDate></item><item><title><![CDATA[Reply to Awls and Chisels for LM Charge, Wave, Surge on Wed, 15 Jun 2016 02:18:23 GMT]]></title><description><![CDATA[<p dir="auto">Im gonna have to steal this one.</p>
]]></description><link>https://multitool.ninja/post/1283146</link><guid isPermaLink="true">https://multitool.ninja/post/1283146</guid><dc:creator><![CDATA[sLaughterMed]]></dc:creator><pubDate>Wed, 15 Jun 2016 02:18:23 GMT</pubDate></item><item><title><![CDATA[Reply to Awls and Chisels for LM Charge, Wave, Surge on Wed, 15 Jun 2016 00:03:38 GMT]]></title><description><![CDATA[<p dir="auto">I was a necrothreader even back in the day :o 8)</p>
]]></description><link>https://multitool.ninja/post/1283076</link><guid isPermaLink="true">https://multitool.ninja/post/1283076</guid><dc:creator><![CDATA[Poncho65]]></dc:creator><pubDate>Wed, 15 Jun 2016 00:03:38 GMT</pubDate></item><item><title><![CDATA[Reply to Awls and Chisels for LM Charge, Wave, Surge on Wed, 15 Jun 2016 00:01:04 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/poncho65" aria-label="Profile: Poncho65">@<bdi>Poncho65</bdi></a> <a href="/post/86503">said</a>:<br />
An older post but such a wonderful tool idea. <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /> I read this when I first joined was a great idea to me then and that made me think about it when I got my new wave.  I think that I might just give that a try myself,  it may be a while but I think i'll try it  :D</p>
</blockquote>
<p dir="auto">Never did try it <img src="/assets/uploads/smileys/facepalm.gif" alt=":facepalm:" title="Facepalm" class="forum-smiley emoji" /> :D</p>
]]></description><link>https://multitool.ninja/post/1283074</link><guid isPermaLink="true">https://multitool.ninja/post/1283074</guid><dc:creator><![CDATA[Poncho65]]></dc:creator><pubDate>Wed, 15 Jun 2016 00:01:04 GMT</pubDate></item><item><title><![CDATA[Reply to Awls and Chisels for LM Charge, Wave, Surge on Tue, 14 Jun 2016 23:58:51 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto">@Xelkos <a href="/post/1283002">said</a>:<br />
Another oldy but goody!  <img src="/assets/uploads/smileys/whistle.gif" alt=":whistle:" title="Whistle" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">Yep that is a good one <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1283073</link><guid isPermaLink="true">https://multitool.ninja/post/1283073</guid><dc:creator><![CDATA[Poncho65]]></dc:creator><pubDate>Tue, 14 Jun 2016 23:58:51 GMT</pubDate></item><item><title><![CDATA[Reply to Awls and Chisels for LM Charge, Wave, Surge on Tue, 14 Jun 2016 21:51:47 GMT]]></title><description><![CDATA[<p dir="auto">Another oldy but goody!  <img src="/assets/uploads/smileys/whistle.gif" alt=":whistle:" title="Whistle" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1283002</link><guid isPermaLink="true">https://multitool.ninja/post/1283002</guid><dc:creator><![CDATA[Outback in Idaho]]></dc:creator><pubDate>Tue, 14 Jun 2016 21:51:47 GMT</pubDate></item><item><title><![CDATA[Reply to Awls and Chisels for LM Charge, Wave, Surge on Tue, 20 Jan 2015 19:05:11 GMT]]></title><description><![CDATA[<p dir="auto">theres some good info in this thread, so instead of creating a new one, i figured i'd raise this one again :)</p>
<p dir="auto">one bugbear of my new wave is the lack of an awl - now,  my beloved Squirt P4 has one but that's not enough, my wave has to have one as well. I'm not the best at DIY but i was recently gifted a dremel, so i had a solution in search of a problem, and here's my problem.<br />
So, a couple of 8mm drill bits on their way and I'll see if i can make myself an awl . . .</p>
]]></description><link>https://multitool.ninja/post/1027348</link><guid isPermaLink="true">https://multitool.ninja/post/1027348</guid><dc:creator><![CDATA[eamo]]></dc:creator><pubDate>Tue, 20 Jan 2015 19:05:11 GMT</pubDate></item><item><title><![CDATA[Reply to Awls and Chisels for LM Charge, Wave, Surge on Mon, 30 Sep 2013 04:26:11 GMT]]></title><description><![CDATA[<p dir="auto">Now I have to het a 5/16 paddle bit now and try it.</p>
<p dir="auto">Sent from my SCH-I605 using Tapatalk 4</p>
]]></description><link>https://multitool.ninja/post/780751</link><guid isPermaLink="true">https://multitool.ninja/post/780751</guid><dc:creator><![CDATA[mtngoat]]></dc:creator><pubDate>Mon, 30 Sep 2013 04:26:11 GMT</pubDate></item><item><title><![CDATA[Reply to Awls and Chisels for LM Charge, Wave, Surge on Mon, 30 Sep 2013 02:09:11 GMT]]></title><description><![CDATA[<p dir="auto">It was just a picture of Dr. Evil.  &gt;:D   All fixed now.</p>
]]></description><link>https://multitool.ninja/post/780738</link><guid isPermaLink="true">https://multitool.ninja/post/780738</guid><dc:creator><![CDATA[enki_ck]]></dc:creator><pubDate>Mon, 30 Sep 2013 02:09:11 GMT</pubDate></item><item><title><![CDATA[Reply to Awls and Chisels for LM Charge, Wave, Surge on Sun, 29 Sep 2013 21:51:00 GMT]]></title><description><![CDATA[<p dir="auto">Thanks for the heads up. I get the same warning on page 3, not 2. I've reported ti so hopefully Whoey can sort this out soon.</p>
]]></description><link>https://multitool.ninja/post/780649</link><guid isPermaLink="true">https://multitool.ninja/post/780649</guid><dc:creator><![CDATA[enki_ck]]></dc:creator><pubDate>Sun, 29 Sep 2013 21:51:00 GMT</pubDate></item><item><title><![CDATA[Reply to Awls and Chisels for LM Charge, Wave, Surge on Sun, 29 Sep 2013 21:07:25 GMT]]></title><description><![CDATA[<p dir="auto">I know, necro thread and stuff, but I just wanted to say my browser gives a malware-warning for page two of this thread... Just so you know ;) I've not checked it out further.</p>
]]></description><link>https://multitool.ninja/post/780631</link><guid isPermaLink="true">https://multitool.ninja/post/780631</guid><dc:creator><![CDATA[bmot]]></dc:creator><pubDate>Sun, 29 Sep 2013 21:07:25 GMT</pubDate></item><item><title><![CDATA[Reply to Awls and Chisels for LM Charge, Wave, Surge on Wed, 20 Mar 2013 20:17:31 GMT]]></title><description><![CDATA[<p dir="auto">Does anyone know, is SOG awl fits somehow in LM Wave?</p>
<p dir="auto"><a href="http://www.sogknives.com/tactical/accessories/awl.html" rel="nofollow ugc">http://www.sogknives.com/tactical/accessories/awl.html</a></p>
]]></description><link>https://multitool.ninja/post/706984</link><guid isPermaLink="true">https://multitool.ninja/post/706984</guid><dc:creator><![CDATA[antouant]]></dc:creator><pubDate>Wed, 20 Mar 2013 20:17:31 GMT</pubDate></item><item><title><![CDATA[Reply to Awls and Chisels for LM Charge, Wave, Surge on Tue, 03 Jan 2012 12:33:10 GMT]]></title><description><![CDATA[<p dir="auto">I ground my Wave flat blade driver into a chisel when I was working rental unit maintenance. It was the thing for moving the strike plate around and adjusting how doors latched shut. Anybody I worked with only had to see that once before they had they own Wave and were asking me to grind it.</p>
]]></description><link>https://multitool.ninja/post/554623</link><guid isPermaLink="true">https://multitool.ninja/post/554623</guid><dc:creator><![CDATA[bushidomosquito]]></dc:creator><pubDate>Tue, 03 Jan 2012 12:33:10 GMT</pubDate></item><item><title><![CDATA[Reply to Awls and Chisels for LM Charge, Wave, Surge on Sun, 01 Jan 2012 21:38:58 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/david" aria-label="Profile: David">@<bdi>David</bdi></a> <a href="/post/553875">said</a>:</p>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/j-sews" aria-label="Profile: J-sews">@<bdi>J-sews</bdi></a> <a href="/post/553866">said</a>:</p>
<blockquote>
<p dir="auto">Hi Dave, good on you for finally getting it done! <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /> Pretty easy wasn't it? :) Have you tested it out on anything yet?</p>
</blockquote>
<p dir="auto">Bob it was much easier than I thought it would be. It seems the only tempering in that bit was only on the very end. So it was easy to file the bit into shape. No havent tried it out on any thing yet. This bit was pretty thin so it fit loose in the bit card. I used a little duct tape to take up the slack. Fits nice and tight now.   :D</p>
</blockquote>
<p dir="auto">Cool! :) And it will definitely save the tip of your knife blade someday <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/553877</link><guid isPermaLink="true">https://multitool.ninja/post/553877</guid><dc:creator><![CDATA[J-sews]]></dc:creator><pubDate>Sun, 01 Jan 2012 21:38:58 GMT</pubDate></item><item><title><![CDATA[Reply to Awls and Chisels for LM Charge, Wave, Surge on Sun, 01 Jan 2012 21:33:45 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/j-sews" aria-label="Profile: J-sews">@<bdi>J-sews</bdi></a> <a href="/post/553866">said</a>:<br />
Hi Dave, good on you for finally getting it done! <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /> Pretty easy wasn't it? :) Have you tested it out on anything yet?</p>
</blockquote>
<p dir="auto">Bob it was much easier than I thought it would be. It seems the only tempering in that bit was only on the very end. So it was easy to file the bit into shape. No havent tried it out on any thing yet. This bit was pretty thin so it fit loose in the bit card. I used a little duct tape to take up the slack. Fits nice and tight now.   :D</p>
]]></description><link>https://multitool.ninja/post/553875</link><guid isPermaLink="true">https://multitool.ninja/post/553875</guid><dc:creator><![CDATA[David]]></dc:creator><pubDate>Sun, 01 Jan 2012 21:33:45 GMT</pubDate></item><item><title><![CDATA[Reply to Awls and Chisels for LM Charge, Wave, Surge on Sun, 01 Jan 2012 21:19:20 GMT]]></title><description><![CDATA[<p dir="auto">Hi Dave, good on you for finally getting it done! <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /> Pretty easy wasn't it? :) Have you tested it out on anything yet?</p>
<p dir="auto">Nice looking work there Rahmed <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /> Seems like a lot of different tools could be made to work in the Leatherman bit receptacle :)</p>
]]></description><link>https://multitool.ninja/post/553866</link><guid isPermaLink="true">https://multitool.ninja/post/553866</guid><dc:creator><![CDATA[J-sews]]></dc:creator><pubDate>Sun, 01 Jan 2012 21:19:20 GMT</pubDate></item><item><title><![CDATA[Reply to Awls and Chisels for LM Charge, Wave, Surge on Sun, 01 Jan 2012 21:09:48 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/rahmed" aria-label="Profile: Rahmed">@<bdi>Rahmed</bdi></a> <a href="/post/553850">said</a>:<br />
LM Surge chisel &amp; LM Charge awl from Vic 8)</p>
<p dir="auto"><img src="http://img196.imageshack.us/img196/74/lmsurgedlatko.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="http://img864.imageshack.us/img864/4057/vicawllm.jpg" alt="" class="img-markdown  img-fluid" /></p>
</blockquote>
<p dir="auto">Ok tell me how you did the Vic awl in the multi pleeeeaaassssseeeee?</p>
]]></description><link>https://multitool.ninja/post/553858</link><guid isPermaLink="true">https://multitool.ninja/post/553858</guid><dc:creator><![CDATA[tattoosteve99]]></dc:creator><pubDate>Sun, 01 Jan 2012 21:09:48 GMT</pubDate></item><item><title><![CDATA[Reply to Awls and Chisels for LM Charge, Wave, Surge on Sun, 01 Jan 2012 20:52:05 GMT]]></title><description><![CDATA[<p dir="auto">LM Surge chisel &amp; LM Charge awl from Vic 8)</p>
<p dir="auto"><img src="http://img196.imageshack.us/img196/74/lmsurgedlatko.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="http://img864.imageshack.us/img864/4057/vicawllm.jpg" alt="" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/553850</link><guid isPermaLink="true">https://multitool.ninja/post/553850</guid><dc:creator><![CDATA[Rahmed]]></dc:creator><pubDate>Sun, 01 Jan 2012 20:52:05 GMT</pubDate></item><item><title><![CDATA[Reply to Awls and Chisels for LM Charge, Wave, Surge on Sun, 01 Jan 2012 20:42:52 GMT]]></title><description><![CDATA[<p dir="auto">Awl in the TTi.</p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/30801_awlproject%20028.JPG" alt="awlproject 028.JPG" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/553842</link><guid isPermaLink="true">https://multitool.ninja/post/553842</guid><dc:creator><![CDATA[David]]></dc:creator><pubDate>Sun, 01 Jan 2012 20:42:52 GMT</pubDate></item><item><title><![CDATA[Reply to Awls and Chisels for LM Charge, Wave, Surge on Sun, 01 Jan 2012 20:41:50 GMT]]></title><description><![CDATA[<p dir="auto">Filing the lock notch and awl in bit card.</p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/30797_awlproject%20017.JPG" alt="awlproject 017.JPG" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/30799_awlproject%20025.JPG" alt="awlproject 025.JPG" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/553841</link><guid isPermaLink="true">https://multitool.ninja/post/553841</guid><dc:creator><![CDATA[David]]></dc:creator><pubDate>Sun, 01 Jan 2012 20:41:50 GMT</pubDate></item><item><title><![CDATA[Reply to Awls and Chisels for LM Charge, Wave, Surge on Sun, 01 Jan 2012 20:39:28 GMT]]></title><description><![CDATA[<p dir="auto">That didn`t take very long. Here are some in process pics.   :)</p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/30793_awlproject%20008.JPG" alt="awlproject 008.JPG" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/30795_awlproject%20011.JPG" alt="awlproject 011.JPG" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/553837</link><guid isPermaLink="true">https://multitool.ninja/post/553837</guid><dc:creator><![CDATA[David]]></dc:creator><pubDate>Sun, 01 Jan 2012 20:39:28 GMT</pubDate></item><item><title><![CDATA[Reply to Awls and Chisels for LM Charge, Wave, Surge on Sun, 01 Jan 2012 18:02:43 GMT]]></title><description><![CDATA[<p dir="auto">This old thread shows me I need to read more here <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/553760</link><guid isPermaLink="true">https://multitool.ninja/post/553760</guid><dc:creator><![CDATA[tattoosteve99]]></dc:creator><pubDate>Sun, 01 Jan 2012 18:02:43 GMT</pubDate></item></channel></rss>