<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0"><channel><title><![CDATA[Vasoline]]></title><description><![CDATA[<p dir="auto">I have read many times that Vasoline (petroleum jelly) isn't good to use as a sealant/lubricant for flashlights because it deteriorates the rubber o rings.  Is that true, or is it just another myth?</p>
<p dir="auto">I've done it with my Mag Lights when working over the years and have never had a problem with deteriorated o rings, but then just because it hasn't happened to me doesn't mean that it won't happen.</p>
<p dir="auto">Def</p>
]]></description><link>https://multitool.ninja/topic/1160/vasoline</link><generator>RSS for Node</generator><lastBuildDate>Mon, 16 Nov 2026 16:21:07 GMT</lastBuildDate><atom:link href="https://multitool.ninja/topic/1160.rss" rel="self" type="application/rss+xml"/><pubDate>Mon, 16 Apr 2007 17:32:04 GMT</pubDate><ttl>60</ttl><item><title><![CDATA[Reply to Vasoline on Tue, 17 Apr 2007 04:35:43 GMT]]></title><description><![CDATA[<p dir="auto">I second parnass's recommendation.</p>
<p dir="auto">DO NOT use petroleum products on o-rings unless you know what material they are made of.  Better yet, never use petroleum products on o-rings because you will likely NEVER know what material they are made of.</p>
<p dir="auto">Petroleum products can make certain materials deteriorate or swell.</p>
<p dir="auto">If it swells, ride it.</p>
]]></description><link>https://multitool.ninja/post/13059</link><guid isPermaLink="true">https://multitool.ninja/post/13059</guid><dc:creator><![CDATA[NutSAK]]></dc:creator><pubDate>Tue, 17 Apr 2007 04:35:43 GMT</pubDate></item><item><title><![CDATA[Reply to Vasoline on Tue, 17 Apr 2007 01:42:32 GMT]]></title><description><![CDATA[<p dir="auto">Awesome.  Thanks for the info!</p>
<p dir="auto">Def</p>
]]></description><link>https://multitool.ninja/post/13034</link><guid isPermaLink="true">https://multitool.ninja/post/13034</guid><dc:creator><![CDATA[Grant Lamontagne]]></dc:creator><pubDate>Tue, 17 Apr 2007 01:42:32 GMT</pubDate></item><item><title><![CDATA[Reply to Vasoline on Tue, 17 Apr 2007 01:34:57 GMT]]></title><description><![CDATA[<p dir="auto">In the USA, you can buy silicone grease in the plumbing supply section in Home Depot for about $3.  That's what I use.</p>
<p dir="auto">Here is an O-ring/chemical compatability chart:</p>
<p dir="auto"></p><div class="card col-md-9 col-lg-6 position-relative link-preview p-0">

<div class="card-body">
<h5 class="card-title">
<a class="text-decoration-none" href="http://52.26.242.54/designstandards/oring/oring_chemical.cfm?SM=none&amp;SC=Hexane">
Not Found
</a>
</h5>
<p class="card-text line-clamp-3"></p>
</div>
<a href="http://52.26.242.54/designstandards/oring/oring_chemical.cfm?SM=none&amp;SC=Hexane" class="card-footer text-body-secondary small d-flex gap-2 align-items-center lh-2">



<img src="http://52.26.242.54/favicon.ico" alt="favicon" class="not-responsive overflow-hiddden" style="max-width:21px;max-height:21px" />



<p class="d-inline-block text-truncate mb-0"> <span class="text-secondary">(www.efunda.com)</span></p>
</a>
</div><p></p>
]]></description><link>https://multitool.ninja/post/13032</link><guid isPermaLink="true">https://multitool.ninja/post/13032</guid><dc:creator><![CDATA[parnass]]></dc:creator><pubDate>Tue, 17 Apr 2007 01:34:57 GMT</pubDate></item><item><title><![CDATA[Reply to Vasoline on Mon, 16 Apr 2007 21:55:09 GMT]]></title><description><![CDATA[<p dir="auto">Here's what I found so far:</p>
<blockquote>
<p dir="auto">I use NyoGel 759G because it is one of the lubes that SureFire use. I got a 1lb pot of it a couple years ago. I've still got about 1/3 left.</p>
<p dir="auto">"This gel type grease is mildly thixotropic i.e. it becomes semi-fluid on agitation, improving lubrication of the seal surfaces, but it returns to the gelled state when agitation ceases. The grease has excellent stay-in-place characteristics so it steadily provides free motion &amp; water resistance."<br />
[I had this description on file without a source, sorry]</p>
</blockquote>
<blockquote>
<p dir="auto">if your lubing surefire lights, Surefire doesnt recommend the use of any petroleum based lubricants as it causes the o-rings to swell</p>
</blockquote>
<blockquote>
<p dir="auto">Hi, I struggled with this question about a year ago. Vaseline gums and sticks after a while and is said to degrade rubber seals. Liquid lubricants tend to collect dirt and migrate into flashlight internals.</p>
<p dir="auto">The manual for my Princeton Tecs said "use silicone-based grease and no other." After a bit of digging on the Web, I discovered that polydimethylsiloxane is the stuff you need.</p>
<p dir="auto">After poking around a bit, I discovered this it's available at any automotive store under the name "dielectric tune-up grease." It seems to work fine for "above water" flashlights, and it doesn't gum up over time. Got a lifetime supply at Cdn. Tire for under ten bucks.</p>
<p dir="auto">A caution, though: I don't know the purity of this stuff. If I was relying on a diving light for life-and-limb, I'd pay the boutique price from the dive shop.</p>
</blockquote>
<blockquote>
<p dir="auto">I don't think that natural rubber o-rings have been made in many years - they have all been made of synthetic rubbers for many years.</p>
<p dir="auto">Don't worry about the lube damaging the o-ring - use whatever lubricant gives the 'feel' you prefer.</p>
<p dir="auto">BTW, silicone greases tend to creep forever and attract dust like crazy, without actually being good lubricants.</p>
<p dir="auto">I find that a light grease works nicely and minimizes the amount that gets into the works, unlike an oil which can migrate around the inside of the light.</p>
</blockquote>
<p dir="auto">Of all the threads I looked through most recommended either Silicone Grease or Nyogel.</p>
]]></description><link>https://multitool.ninja/post/13028</link><guid isPermaLink="true">https://multitool.ninja/post/13028</guid><dc:creator><![CDATA[Spoonrobot]]></dc:creator><pubDate>Mon, 16 Apr 2007 21:55:09 GMT</pubDate></item><item><title><![CDATA[Reply to Vasoline on Mon, 16 Apr 2007 19:46:06 GMT]]></title><description><![CDATA[<p dir="auto">If I remember correctly Surefire wants you to use a different lubricant because vasoline, 3-in-1, and so forth actually inhibit the conductivity of the light. Keep in mind that some Surefire lights are pulling more than 2 amps per their voltage and when you reach this high of current you need all the help you can get to ensure brightness and runtime are up to par.</p>
<p dir="auto">I use Nyogel from light hound and have no complaints with it. Prior to this I used motor oil and never really noticed a difference in brightness/runtime after the switch.</p>
<p dir="auto">You may want to do a search on the ol' candlepowerforums to see if there are any better opinions than mine out there.  ???</p>
]]></description><link>https://multitool.ninja/post/13025</link><guid isPermaLink="true">https://multitool.ninja/post/13025</guid><dc:creator><![CDATA[Spoonrobot]]></dc:creator><pubDate>Mon, 16 Apr 2007 19:46:06 GMT</pubDate></item><item><title><![CDATA[Reply to Vasoline on Mon, 16 Apr 2007 19:11:14 GMT]]></title><description><![CDATA[<p dir="auto">I wonder if that means Mag is using different kinds of o rings?  Or maybe SureFire and other manufacturers want folks to use a more "tactical" ;ubricant to make their products seem more advanced?</p>
<p dir="auto">As Kelly Bundy used to say, "The mind wobbles."</p>
<p dir="auto"><img src="http://www.bundyology.com/sfg/1005k.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Def</p>
]]></description><link>https://multitool.ninja/post/13021</link><guid isPermaLink="true">https://multitool.ninja/post/13021</guid><dc:creator><![CDATA[Grant Lamontagne]]></dc:creator><pubDate>Mon, 16 Apr 2007 19:11:14 GMT</pubDate></item><item><title><![CDATA[Reply to Vasoline on Mon, 16 Apr 2007 19:02:43 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/grant-lamontagne" aria-label="Profile: Defender">@<bdi>Defender</bdi></a> <a href="/post/13016">said</a>:<br />
I have read many times that Vasoline (petroleum jelly) isn't good to use as a sealant/lubricant for flashlights because it deteriorates the rubber o rings.  Is that true, or is it just another myth?</p>
<p dir="auto">I've done it with my Mag Lights when working over the years and have never had a problem with deteriorated o rings, but then just because it hasn't happened to me doesn't mean that it won't happen.</p>
<p dir="auto">Def</p>
</blockquote>
<p dir="auto">Have a look here def <a href="http://www.maglite.com/pdf/CustServ/D_BEC_6_041112004509502.pdf" rel="nofollow ugc">http://www.maglite.com/pdf/CustServ/D_BEC_6_041112004509502.pdf</a><br />
It says " MAINTENANCE - Place a small amount of petroleum jelly on all threads and O rings every 6 months "<br />
But Surefire and other torch ( flashlight ) companys state that you must not use petroleum jelly and use sillicon grease instead . I have used Vasoline on my mags but when I had my Surefires I got a tube of Sillicon and now use that .</p>
<p dir="auto">Dunc</p>
]]></description><link>https://multitool.ninja/post/13020</link><guid isPermaLink="true">https://multitool.ninja/post/13020</guid><dc:creator><![CDATA[Dunc]]></dc:creator><pubDate>Mon, 16 Apr 2007 19:02:43 GMT</pubDate></item></channel></rss>