<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0"><channel><title><![CDATA[Paul Chen Multi Tasker]]></title><description><![CDATA[<p dir="auto">I have just received a Paul Chen Multi Tasker, first impression= it could have been made by Gerber, very much like a shiny Recoil. Then when you start using it you find the shears can not be flicked out like a Gerber because they are locked in both the open and closed position. To use you have to press the buttons and let it slide open/closed. The shears are 1/8" thick and cut what cable I had laying around very well also paper card plastic sheet a seat belt and some cavas.<br />
When closed the tools available are a one hand opening knife on one limb with a pocket? clip on the other limb. Behind the clip is a file that when you open it comes away from the tool and a 16tpi saw blade. When open there is a Philips screw driver on one of the arms (it takes the Gerber Bit adapter so 1/4" bits can be used with it. On the other arm there is a small flat driver with a tin opener and a medium driver with a bottle opener. The knife blade is held open by a liner lock the other tools are held open in the same way Gerber used to use, a part of the main body pressing down to act as a slip lock. The file is in a world of its own you must open (remove it to get at the saw and slot it back into position when finished, I personally think it would have been better behind the saw. On the other side to the clip is a sprung open pair of piers the spring is riveted in so it will not be lost, so we shall see how long it lasts. The pliers are about half an inch longer than the ones on the Cybertool.<br />
Although the tools are plain unfinished steel as tools should be and the shears and pliers have some sort of black finish (anodised?) the main body is in chrome with Professional on one side and patent pending (no numbers) on the clip.</p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/140_Chen2.jpg" alt="Chen2.jpg" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/141_Chen3.jpg" alt="Chen3.jpg" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/142_Chen4.jpg" alt="Chen4.jpg" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/topic/135/paul-chen-multi-tasker</link><generator>RSS for Node</generator><lastBuildDate>Mon, 16 Nov 2026 00:33:17 GMT</lastBuildDate><atom:link href="https://multitool.ninja/topic/135.rss" rel="self" type="application/rss+xml"/><pubDate>Tue, 19 Sep 2006 12:19:22 GMT</pubDate><ttl>60</ttl><item><title><![CDATA[Reply to Paul Chen Multi Tasker on Tue, 20 Nov 2018 23:01:27 GMT]]></title><description><![CDATA[<p dir="auto"><img src="/assets/uploads/smileys/agreesign.gif" alt=":iagree:" title="I agree" class="forum-smiley emoji" /></p>
<p dir="auto">If I decide to make metal spacer replacements, I'll make a thread on doing it.  They have such a cool tool with the Chen. To cheap out on structural spacers is insane. If they want to save money, nix the pliers and give us some steel spacers. :ahhh</p>
]]></description><link>https://multitool.ninja/post/1812275</link><guid isPermaLink="true">https://multitool.ninja/post/1812275</guid><dc:creator><![CDATA[gerleatherberman]]></dc:creator><pubDate>Tue, 20 Nov 2018 23:01:27 GMT</pubDate></item><item><title><![CDATA[Reply to Paul Chen Multi Tasker on Tue, 20 Nov 2018 21:21:51 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/gerleatherberman" aria-label="Profile: gerleatherberman">@<bdi>gerleatherberman</bdi></a> <a href="/post/1807785">said</a>:<br />
Here are two photos showing the metal scissor head with plastic structural spacers. <img src="/assets/uploads/smileys/rant.gif" alt=":rant:" title="rant!" class="forum-smiley emoji" /></p>
<p dir="auto">And you'll have to use PVC glue on it. SuperGlue won't work.</p>
</blockquote>
<p dir="auto">The square tip of that part looks like the thing that was broken on my first MT. Being plastic explains it, and I now have very little confidence that this tool would hold up to hard or long term use.  ??? <img src="/assets/uploads/smileys/rant.gif" alt=":rant:" title="rant!" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1812234</link><guid isPermaLink="true">https://multitool.ninja/post/1812234</guid><dc:creator><![CDATA[mikekoz]]></dc:creator><pubDate>Tue, 20 Nov 2018 21:21:51 GMT</pubDate></item><item><title><![CDATA[Reply to Paul Chen Multi Tasker on Wed, 14 Nov 2018 14:48:47 GMT]]></title><description><![CDATA[<p dir="auto">Many thanks, TP! I had forgotten you had a similar issue. When I make some metal internal spacers, I will be copying your slide modification setup. Thank you. <img src="https://multitool.ninja/assets/plugins/nodebb-plugin-emoji/emoji/android/1f642.png?v=b41cf6e2207" class="not-responsive emoji emoji-android emoji--slightly_smiling_face" style="height:1.4em;width:auto;vertical-align:middle" title=":)" alt="🙂" /> What you did is what they should have done at the factory. <img src="https://multitool.ninja/assets/plugins/nodebb-plugin-emoji/emoji/android/1f62e.png?v=b41cf6e2207" class="not-responsive emoji emoji-android emoji--open_mouth" style="height:1.4em;width:auto;vertical-align:middle" title=":o" alt="😮" /> <img src="/assets/uploads/smileys/like-sign.gif" alt=":like:" title="I like this" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1808147</link><guid isPermaLink="true">https://multitool.ninja/post/1808147</guid><dc:creator><![CDATA[gerleatherberman]]></dc:creator><pubDate>Wed, 14 Nov 2018 14:48:47 GMT</pubDate></item><item><title><![CDATA[Reply to Paul Chen Multi Tasker on Wed, 14 Nov 2018 12:30:48 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/gerleatherberman" aria-label="Profile: gerleatherberman">@<bdi>gerleatherberman</bdi></a> <a href="/post/1807785">said</a>:<br />
Here are two photos showing the metal scissor head with plastic structural spacers. <img src="/assets/uploads/smileys/rant.gif" alt=":rant:" title="rant!" class="forum-smiley emoji" /></p>
<p dir="auto">And you'll have to use PVC glue on it. SuperGlue won't work.</p>
</blockquote>
<p dir="auto">do I know... <img src="/assets/uploads/smileys/facepalm.gif" alt=":facepalm:" title="Facepalm" class="forum-smiley emoji" /></p>
<p dir="auto">/topic/78020<br />
<img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1808062</link><guid isPermaLink="true">https://multitool.ninja/post/1808062</guid><dc:creator><![CDATA[ThePeacent]]></dc:creator><pubDate>Wed, 14 Nov 2018 12:30:48 GMT</pubDate></item><item><title><![CDATA[Reply to Paul Chen Multi Tasker on Tue, 13 Nov 2018 19:12:59 GMT]]></title><description><![CDATA[<p dir="auto">Here are two photos showing the metal scissor head with plastic structural spacers. <img src="/assets/uploads/smileys/rant.gif" alt=":rant:" title="rant!" class="forum-smiley emoji" /></p>
<p dir="auto">And you'll have to use PVC glue on it. SuperGlue won't work.</p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/407737_20181113_130904.jpeg" alt="20181113_130904.jpeg" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/407739_20181113_130932.jpeg" alt="20181113_130932.jpeg" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/1807785</link><guid isPermaLink="true">https://multitool.ninja/post/1807785</guid><dc:creator><![CDATA[gerleatherberman]]></dc:creator><pubDate>Tue, 13 Nov 2018 19:12:59 GMT</pubDate></item><item><title><![CDATA[Reply to Paul Chen Multi Tasker on Tue, 13 Nov 2018 19:07:07 GMT]]></title><description><![CDATA[<p dir="auto">After using the Multitasker for a bit, I have one serious conplaint about them.<br />
It started with my father wanting to check it out, but he doesn't know much about MTs and with the scissor head deployed, he thought he could close it, for some reason I can't think of, by roughly spreading the handle apart.  <img src="/assets/uploads/smileys/facepalm.gif" alt=":facepalm:" title="Facepalm" class="forum-smiley emoji" /><br />
Well, I heard something make a faint "crack" noise. It seems to be O.K, but it wasn't deploying properly. I removed the scissor head and looked at the engagement mechanisms closely. The metal scissor blades attach, at the base inside, to plastic slider spacers. He had broken one of the the internal slider spacers. I found the crack and used PVC cement on it and it is fine. But, why? That is like having a tow chain with a single chandelier chain-link in the center.<br />
The plastic spacers have two screws that mount it to the scissor blades by threading it into the plastic spacer. And two screws go into the outer slide button cover, and they are threaded into the plastic spacer as well. A true weak-link. I will probably make some metal spacers at some point, but that is just crazy that they did that to start with. Those plastic spacers take a lot of force with the spring mechanism and they need to be metal. <img src="/assets/uploads/smileys/shrugging.gif" alt=":dunno:" title="I dunno" class="forum-smiley emoji" /><br />
I know the plastic slider spacers make it more quiet to deploy, but they could have made them out of metal and had the screws just use a piece of plastic as a washer to keep it quiet.</p>
<p dir="auto">I am disappointed with that, as it isn't something everyone can remedy.<br />
I'll take a photo of the plastic thing in a minute and post it.</p>
]]></description><link>https://multitool.ninja/post/1807778</link><guid isPermaLink="true">https://multitool.ninja/post/1807778</guid><dc:creator><![CDATA[gerleatherberman]]></dc:creator><pubDate>Tue, 13 Nov 2018 19:07:07 GMT</pubDate></item><item><title><![CDATA[Reply to Paul Chen Multi Tasker on Wed, 07 Nov 2018 18:07:15 GMT]]></title><description><![CDATA[<p dir="auto">My second Chen Multitasker arrived. It is consistent and almost identical to the first one I received. The only difference I can detect is the second one I received(different seller mind you) had zero play in the pliezers. The first one had a tiny bit of play in the pliezers.</p>
<p dir="auto">I'll be carrying it with me tomorrow to try it out. <img src="https://multitool.ninja/assets/plugins/nodebb-plugin-emoji/emoji/android/1f642.png?v=b41cf6e2207" class="not-responsive emoji emoji-android emoji--slightly_smiling_face" style="height:1.4em;width:auto;vertical-align:middle" title=":)" alt="🙂" /></p>
<p dir="auto">Sorry about the dark photos. :ahhh</p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/406625_20181107_114944-1.jpeg" alt="20181107_114944-1.jpeg" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/406627_20181107_115051-1.jpeg" alt="20181107_115051-1.jpeg" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/406629_20181107_115151-1.jpeg" alt="20181107_115151-1.jpeg" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/1804537</link><guid isPermaLink="true">https://multitool.ninja/post/1804537</guid><dc:creator><![CDATA[gerleatherberman]]></dc:creator><pubDate>Wed, 07 Nov 2018 18:07:15 GMT</pubDate></item><item><title><![CDATA[Reply to Paul Chen Multi Tasker on Tue, 06 Nov 2018 18:21:14 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/mikekoz" aria-label="Profile: mikekoz">@<bdi>mikekoz</bdi></a> <a href="/post/1803968">said</a>:<br />
One more thing. Until I read this thread, I was not aware of how far back this model goes. I thought it was relatively new!!</p>
</blockquote>
<p dir="auto">Indeed. It explains why some production runs are slightly different in looks and quality. :ahhh</p>
]]></description><link>https://multitool.ninja/post/1804061</link><guid isPermaLink="true">https://multitool.ninja/post/1804061</guid><dc:creator><![CDATA[gerleatherberman]]></dc:creator><pubDate>Tue, 06 Nov 2018 18:21:14 GMT</pubDate></item><item><title><![CDATA[Reply to Paul Chen Multi Tasker on Tue, 06 Nov 2018 16:06:26 GMT]]></title><description><![CDATA[<p dir="auto">One more thing. Until I read this thread, I was not aware of how far back this model goes. I thought it was relatively new!!</p>
]]></description><link>https://multitool.ninja/post/1803968</link><guid isPermaLink="true">https://multitool.ninja/post/1803968</guid><dc:creator><![CDATA[mikekoz]]></dc:creator><pubDate>Tue, 06 Nov 2018 16:06:26 GMT</pubDate></item><item><title><![CDATA[Reply to Paul Chen Multi Tasker on Tue, 06 Nov 2018 15:18:42 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/mikekoz" aria-label="Profile: mikekoz">@<bdi>mikekoz</bdi></a> <a href="/post/1803917">said</a>:<br />
The build quality on it I think is actually pretty good. The pliers looks like the designer forgot to add them to the tool, then just slapped them on the side!!  :D. The shears are the best part, and I like the removable file. My blade was a bit dull when I got it, but have sharpened it a bit. The saw is also pretty sharp, but the smaller things like the can opener, are a bit hard to open. The main issue with it for me is the body of the tool digs into my hands when I squeeze it closed using the shears.</p>
</blockquote>
<p dir="auto">Indeed. The removal of the pliezers would make the tool much better.</p>
<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/reamerpunch" aria-label="Profile: ReamerPunch">@<bdi>ReamerPunch</bdi></a> <a href="/post/1803925">said</a>:<br />
I returned this before starting my can opener thread. Now I am left wondering if its can opener works or not.  <img src="/assets/uploads/smileys/facepalm.gif" alt=":facepalm:" title="Facepalm" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">If you'll remind me, I can try the opener out at some point when the second one arrives. <img src="https://multitool.ninja/assets/plugins/nodebb-plugin-emoji/emoji/android/1f642.png?v=b41cf6e2207" class="not-responsive emoji emoji-android emoji--slightly_smiling_face" style="height:1.4em;width:auto;vertical-align:middle" title=":)" alt="🙂" /><br />
It won't be like doing it yourself, but I can show the cut quality and discuss the operating ergonomics.</p>
]]></description><link>https://multitool.ninja/post/1803932</link><guid isPermaLink="true">https://multitool.ninja/post/1803932</guid><dc:creator><![CDATA[gerleatherberman]]></dc:creator><pubDate>Tue, 06 Nov 2018 15:18:42 GMT</pubDate></item><item><title><![CDATA[Reply to Paul Chen Multi Tasker on Tue, 06 Nov 2018 15:13:47 GMT]]></title><description><![CDATA[<p dir="auto">I returned this before starting my can opener thread. Now I am left wondering if its can opener works or not.  <img src="/assets/uploads/smileys/facepalm.gif" alt=":facepalm:" title="Facepalm" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1803925</link><guid isPermaLink="true">https://multitool.ninja/post/1803925</guid><dc:creator><![CDATA[ReamerPunch]]></dc:creator><pubDate>Tue, 06 Nov 2018 15:13:47 GMT</pubDate></item><item><title><![CDATA[Reply to Paul Chen Multi Tasker on Tue, 06 Nov 2018 15:06:38 GMT]]></title><description><![CDATA[<p dir="auto">The build quality on it I think is actually pretty good. The pliers looks like the designer forgot to add them to the tool, then just slapped them on the side!!  :D. The shears are the best part, and I like the removable file. My blade was a bit dull when I got it, but have sharpened it a bit. The saw is also pretty sharp, but the smaller things like the can opener, are a bit hard to open. The main issue with it for me is the body of the tool digs into my hands when I squeeze it closed using the shears.</p>
]]></description><link>https://multitool.ninja/post/1803917</link><guid isPermaLink="true">https://multitool.ninja/post/1803917</guid><dc:creator><![CDATA[mikekoz]]></dc:creator><pubDate>Tue, 06 Nov 2018 15:06:38 GMT</pubDate></item><item><title><![CDATA[Reply to Paul Chen Multi Tasker on Tue, 06 Nov 2018 15:02:40 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/reamerpunch" aria-label="Profile: ReamerPunch">@<bdi>ReamerPunch</bdi></a> <a href="/post/1803912">said</a>:<br />
<img src="https://multitool.ninja/assets/plugins/nodebb-plugin-emoji/emoji/android/1f37f.png?v=b41cf6e2207" class="not-responsive emoji emoji-android emoji--popcorn" style="height:1.4em;width:auto;vertical-align:middle" title=":popcorn:" alt="🍿" /><br />
I hope the quality you experienced with the first continues.<br />
I was sad when I returned mine. I liked the shears.</p>
</blockquote>
<p dir="auto">Thank you much, RP! It is coming from a different seller, so I am not so optimistic. You (along with other Chen detractors) are usually spot on about stuff. I feel lucky having gotten the first one that was good.<br />
Here's hoping for the best. <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /></p>
<p dir="auto">I am looking forward to a comparison thread with the Bear &amp; Sons Bird Shears/Toolzall Pro. <img src="https://multitool.ninja/assets/plugins/nodebb-plugin-emoji/emoji/android/1f642.png?v=b41cf6e2207" class="not-responsive emoji emoji-android emoji--slightly_smiling_face" style="height:1.4em;width:auto;vertical-align:middle" title=":)" alt="🙂" /></p>
]]></description><link>https://multitool.ninja/post/1803914</link><guid isPermaLink="true">https://multitool.ninja/post/1803914</guid><dc:creator><![CDATA[gerleatherberman]]></dc:creator><pubDate>Tue, 06 Nov 2018 15:02:40 GMT</pubDate></item><item><title><![CDATA[Reply to Paul Chen Multi Tasker on Tue, 06 Nov 2018 14:56:02 GMT]]></title><description><![CDATA[<p dir="auto"><img src="https://multitool.ninja/assets/plugins/nodebb-plugin-emoji/emoji/android/1f37f.png?v=b41cf6e2207" class="not-responsive emoji emoji-android emoji--popcorn" style="height:1.4em;width:auto;vertical-align:middle" title=":popcorn:" alt="🍿" /><br />
I hope the quality you experienced with the first continues.<br />
I was sad when I returned mine. I liked the shears.</p>
]]></description><link>https://multitool.ninja/post/1803912</link><guid isPermaLink="true">https://multitool.ninja/post/1803912</guid><dc:creator><![CDATA[ReamerPunch]]></dc:creator><pubDate>Tue, 06 Nov 2018 14:56:02 GMT</pubDate></item><item><title><![CDATA[Reply to Paul Chen Multi Tasker on Tue, 06 Nov 2018 14:51:34 GMT]]></title><description><![CDATA[<p dir="auto">I'd just use them like scissors. Swing the pliezers out and use thumb pressure to operated. And the nuts I'm talking about would be small and not rusted/loc-tited on. :ahhh</p>
<p dir="auto">I've got a second Chen tool on the way( <img src="/assets/uploads/smileys/facepalm.gif" alt=":facepalm:" title="Facepalm" class="forum-smiley emoji" />), so I'll be doing some usage experiments. <img src="/assets/uploads/smileys/multitool.gif" alt=":multi:" title="multi" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1803910</link><guid isPermaLink="true">https://multitool.ninja/post/1803910</guid><dc:creator><![CDATA[gerleatherberman]]></dc:creator><pubDate>Tue, 06 Nov 2018 14:51:34 GMT</pubDate></item><item><title><![CDATA[Reply to Paul Chen Multi Tasker on Tue, 06 Nov 2018 14:02:32 GMT]]></title><description><![CDATA[<p dir="auto">Thanks! Found the screw, but could not access it well enough to turn it.  As far as the pliers go, I cannot imagine them being able to turn a bolt. They are too small and thin, and look like they would break off the body of the tool if held incorrectly. Just holding the pliers themselves would be awkward, at least for me.  ???</p>
]]></description><link>https://multitool.ninja/post/1803863</link><guid isPermaLink="true">https://multitool.ninja/post/1803863</guid><dc:creator><![CDATA[mikekoz]]></dc:creator><pubDate>Tue, 06 Nov 2018 14:02:32 GMT</pubDate></item><item><title><![CDATA[Reply to Paul Chen Multi Tasker on Mon, 05 Nov 2018 13:21:08 GMT]]></title><description><![CDATA[<p dir="auto">First photo shows the pivot and tension adjustment screws. Second and third pic are close-ups of the pliezers. Mine line up and have no play. Teeth aren't well formed, but then again, I wouldn't want aggressive teeth on such small pliers. I imagine using them to turn stuff like an 8-32 nut and not leave tool marks or hold little wire while working with it.</p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/406141_20181105_070140-1.jpeg" alt="20181105_070140-1.jpeg" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/406143_20181105_070757-1.jpeg" alt="20181105_070757-1.jpeg" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/406145_20181105_071004-1.jpeg" alt="20181105_071004-1.jpeg" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/1803238</link><guid isPermaLink="true">https://multitool.ninja/post/1803238</guid><dc:creator><![CDATA[gerleatherberman]]></dc:creator><pubDate>Mon, 05 Nov 2018 13:21:08 GMT</pubDate></item><item><title><![CDATA[Reply to Paul Chen Multi Tasker on Mon, 05 Nov 2018 12:56:56 GMT]]></title><description><![CDATA[<p dir="auto">I'll take a pic in a bit.  <img src="https://multitool.ninja/assets/plugins/nodebb-plugin-emoji/emoji/android/1f642.png?v=b41cf6e2207" class="not-responsive emoji emoji-android emoji--slightly_smiling_face" style="height:1.4em;width:auto;vertical-align:middle" title=":)" alt="🙂" /></p>
]]></description><link>https://multitool.ninja/post/1803226</link><guid isPermaLink="true">https://multitool.ninja/post/1803226</guid><dc:creator><![CDATA[gerleatherberman]]></dc:creator><pubDate>Mon, 05 Nov 2018 12:56:56 GMT</pubDate></item><item><title><![CDATA[Reply to Paul Chen Multi Tasker on Mon, 05 Nov 2018 09:54:05 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/gerleatherberman" aria-label="Profile: gerleatherberman">@<bdi>gerleatherberman</bdi></a> <a href="/post/1801355">said</a>:<br />
Got my Chen tool today. I figured it was going to be pretty good, but wow. Maybe my example is a standout, but holy smurf balls the thing exudes an aura of build quality. The shears meet very precisely and can be tightened if they loosen up with a pivot screw. The only thing I believe to be ridiculous is the pliers, but I think that was the only way to get some pliers on it and they are better than no pliers. The can and bottle openers w/ driver tips seem to be o.k, but not amazing.<br />
Mine has superb fit and finish. I certainly feel like, at $25, the tool is more than worth it.</p>
<p dir="auto">I hope I don't have to eat my shoe when I order another one to carry. :ahhh</p>
<p dir="auto">I'll post better photos at some point, but here are a few I took after I opened the package.</p>
</blockquote>
<pre><code>   I just dug mine up, and I do not see any pivot screw for the shears. I do not see it on the photos of your tool, but they are a bit dark. Where is this screw??   <img src="/assets/uploads/smileys/thinking.gif" alt=":think:" title="Thinking" class="forum-smiley emoji" />
</code></pre>
]]></description><link>https://multitool.ninja/post/1803182</link><guid isPermaLink="true">https://multitool.ninja/post/1803182</guid><dc:creator><![CDATA[mikekoz]]></dc:creator><pubDate>Mon, 05 Nov 2018 09:54:05 GMT</pubDate></item><item><title><![CDATA[Reply to Paul Chen Multi Tasker on Sun, 04 Nov 2018 00:08:56 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/reamerpunch" aria-label="Profile: ReamerPunch">@<bdi>ReamerPunch</bdi></a> <a href="/post/1801898">said</a>:</p>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/mikekoz" aria-label="Profile: mikekoz">@<bdi>mikekoz</bdi></a> <a href="/post/1801801">said</a>:</p>
<blockquote>
<p dir="auto">The first one I received was damaged and I had to return it.</p>
</blockquote>
<p dir="auto">What was wrong with yours?</p>
<pre><code>  A part of the sliding mechanism inside the body was broken. It had a big crack in it, and if I kept sliding the shears in and out  it would have eventually just broke off.   
</code></pre>
<p dir="auto">Here's mine, from the other thread on it:</p>
<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/reamerpunch" aria-label="Profile: ReamerPunch">@<bdi>ReamerPunch</bdi></a> <a href="/post/1785342">said</a>:</p>
</blockquote>
<p dir="auto"><strong>Spoiler:</strong><br />
I had gotten one of these. I returned it the next day. I am a fan of scissors and it looked decent enough just to have for the shears.</p>
<blockquote>
<p dir="auto">Every cut-out that formed the backsprings for the tools was cracked. Every single one.<br />
<img src="https://i.imgur.com/SkOr70D.jpg?2" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">The pliers felt like the cheapest aluminium ever. Might as well abandon them or have them made out of plastic. Absolutely terrible. I was thinking of cutting the little piece that they're attached to with a dremel, which would make the handle thinner.</p>
<p dir="auto">I liked the design, but I was very disappointed with the poor quality. Even at its low price, it was a rip-off.</p>
</blockquote>
</blockquote>
]]></description><link>https://multitool.ninja/post/1802498</link><guid isPermaLink="true">https://multitool.ninja/post/1802498</guid><dc:creator><![CDATA[mikekoz]]></dc:creator><pubDate>Sun, 04 Nov 2018 00:08:56 GMT</pubDate></item><item><title><![CDATA[Reply to Paul Chen Multi Tasker on Sat, 03 Nov 2018 13:32:34 GMT]]></title><description><![CDATA[<p dir="auto">Understood, RP! <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /></p>
<p dir="auto">I'll order another one and give it a good reality check at some point.</p>
<p dir="auto">One of the things that impressed me was the shears and pliezers have black oxide coating, where junk tools have the black stuff painted. The shears having thread &amp; screw pivot AND blade tightening set screw in the back of the shears pivot are abnormally good features at the price point.</p>
]]></description><link>https://multitool.ninja/post/1802106</link><guid isPermaLink="true">https://multitool.ninja/post/1802106</guid><dc:creator><![CDATA[gerleatherberman]]></dc:creator><pubDate>Sat, 03 Nov 2018 13:32:34 GMT</pubDate></item><item><title><![CDATA[Reply to Paul Chen Multi Tasker on Sat, 03 Nov 2018 12:33:05 GMT]]></title><description><![CDATA[<p dir="auto">True, it might have held up to actual use, but then again, it was supposed to be new and undamaged, so I did not want to keep it.</p>
]]></description><link>https://multitool.ninja/post/1802069</link><guid isPermaLink="true">https://multitool.ninja/post/1802069</guid><dc:creator><![CDATA[ReamerPunch]]></dc:creator><pubDate>Sat, 03 Nov 2018 12:33:05 GMT</pubDate></item><item><title><![CDATA[Reply to Paul Chen Multi Tasker on Sat, 03 Nov 2018 12:26:50 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/thepeacent" aria-label="Profile: ThePeacent">@<bdi>ThePeacent</bdi></a> said:<br />
I have had three different Multitaskers, two had grey pliers and the one I have kept has black ones. IME the black ones are very good quality whereas the dull grey ones are weak and fragile.  <img src="https://multitool.ninja/assets/plugins/nodebb-plugin-emoji/emoji/android/1f61b.png?v=b41cf6e2207" class="not-responsive emoji emoji-android emoji--stuck_out_tongue" style="height:1.4em;width:auto;vertical-align:middle" title=":P" alt="😛" /> I broke a pair of grey pliers twisting a nut on a wooden door  :ahhh, but the black ones have no issues with it, so in my limited experience they are tougher (especially regarding side to side torque)  <img src="/assets/uploads/smileys/shrugging.gif" alt=":dunno:" title="I dunno" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">Thank you for the info, TP! <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /></p>
<p dir="auto">I spent a few minutes before I went to sleep last night and used reasonably strong finger pressure on the little pliers and they didn't twist or even bend. I even applied strong force on the handle and end of the plier tips without bending them. They are definitely made of some sort of tool steel and not aluminum or spelter metal.</p>
<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/reamerpunch" aria-label="Profile: ReamerPunch">@<bdi>ReamerPunch</bdi></a> <a href="/post/1802038">said</a>:<br />
My pliers were black too.</p>
</blockquote>
<p dir="auto">Did anything on yours break before returning it? <img src="/assets/uploads/smileys/shrugging.gif" alt=":dunno:" title="I dunno" class="forum-smiley emoji" /><br />
I can understand the weakish spring on the pliezers may give an impression that they are weak. And without some carry and usage, we may never know if the corner splitting would have ever led to tab spring failure. Once a tool is deployed, very little force is transferred to the tab spring edges. The most likely failure would have been a weakened retention of tools, but the retention isn't very strong, so it's up in the air if that would have been a problem. <img src="/assets/uploads/smileys/thinking.gif" alt=":think:" title="Thinking" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1802065</link><guid isPermaLink="true">https://multitool.ninja/post/1802065</guid><dc:creator><![CDATA[gerleatherberman]]></dc:creator><pubDate>Sat, 03 Nov 2018 12:26:50 GMT</pubDate></item><item><title><![CDATA[Reply to Paul Chen Multi Tasker on Sat, 03 Nov 2018 11:42:36 GMT]]></title><description><![CDATA[<p dir="auto">My pliers were black too.</p>
]]></description><link>https://multitool.ninja/post/1802038</link><guid isPermaLink="true">https://multitool.ninja/post/1802038</guid><dc:creator><![CDATA[ReamerPunch]]></dc:creator><pubDate>Sat, 03 Nov 2018 11:42:36 GMT</pubDate></item></channel></rss>