<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0"><channel><title><![CDATA[Observations on EDCing the Core]]></title><description><![CDATA[<p dir="auto">Lately I have started collecting Cores. I had always meant to get one (or more), and with the introduction of the ST 300, prices on them have become quite reasonable.</p>
<p dir="auto">Today was my first day carrying the Core, and I am pleasantly surprised. My usual EDC MT, for the last couple of years, has been a Wave, but I bought one of those Core-Crater combos and took the knife to work yesterday in my pocket, and to be honest, I had not realized how reluctant I had become to pull my Wave out of the sheath to use the knife. Having a one handed folder and MT combination was my main goal in carrying the Wave, but with the new knife in my pocket, I found myself using it much more than I ever did the knife on the Wave. I'm definitely going back to carrying a folder in my pocket everyday.</p>
<p dir="auto">There is another reason I want to move to the Core, I tax the Wave pliers more than I should, and the pivot joint is starting to get loose.</p>
<p dir="auto">So since I decided to carry the knife from now on, I started wearing the Core, instead of the Wave. I'm going to give the different sheaths a try over the next couple of weeks and see how they work out. I went with the nylon “pancake” sheath first. I had originally put it on horizontally, but had to change after about half an hour. I tend to keep my belt tight and I found in the horizontal configuration, with its five inches of straightness, made me feel like I had a plank between my belt and pants. I switched it to vertical, and it turned out to be very comfortable. It rides a little higher than the Wave, but it feels more like it is hugging my side than rubbing it.</p>
<p dir="auto">Here are some pros and cons of the sheath thus far:</p>
<p dir="auto">Pros:</p>
<p dir="auto">-Slim profile- doesn't get caught up when working close to something.</p>
<p dir="auto">-Tapered sides- because of its “pancake” design it tapers on the outside edges, giving it a closer fit, and less front and rear surface area.</p>
<p dir="auto">-Holds tool snugly- no flopping around in the sheath.</p>
<p dir="auto">Cons:</p>
<p dir="auto">-Six square inches of Velcro- makes you feel like everyone is looking to see what “that” sound was... I may have to replace it with some snaps.</p>
<p dir="auto">-Stiffness- tool goes in and out with some extra effort (I'm sure this will improve with use).</p>
<p dir="auto">-Closure flap- due to the stiffness of the nylon, combined with the thickness of the tool, the edges of the flap “lift” away from the sheath, this may improve with use. I had worried the these edges would catch on things, but haven't found that to be a problem yet. And this may be entirely resolved if I replace the Velcro with snaps.</p>
<p dir="auto">As far as the weight of the Core goes, I noticed it just a little more than the Wave, but before the Wave I carried a Super Tool, so it is something that I'm accustomed to. It felt very "at home" on my belt, and when I did use it I did not feel like I was pushing it beyond its limits.</p>
<p dir="auto">I'll post more on the tool as it gets used, and as I use the other sheaths (leather and Molle).</p>
<p dir="auto">turnsouth</p>
]]></description><link>https://multitool.ninja/topic/14931/observations-on-edcing-the-core</link><generator>RSS for Node</generator><lastBuildDate>Tue, 17 Nov 2026 21:31:02 GMT</lastBuildDate><atom:link href="https://multitool.ninja/topic/14931.rss" rel="self" type="application/rss+xml"/><pubDate>Sat, 31 Oct 2009 03:41:42 GMT</pubDate><ttl>60</ttl><item><title><![CDATA[Reply to Observations on EDCing the Core on Tue, 08 Dec 2009 02:53:26 GMT]]></title><description><![CDATA[<p dir="auto">Very nifty mod indeed on the 200 <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/297045</link><guid isPermaLink="true">https://multitool.ninja/post/297045</guid><dc:creator><![CDATA[Poncho65]]></dc:creator><pubDate>Tue, 08 Dec 2009 02:53:26 GMT</pubDate></item><item><title><![CDATA[Reply to Observations on EDCing the Core on Tue, 08 Dec 2009 00:55:52 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/benner" aria-label="Profile: Benner">@<bdi>Benner</bdi></a> <a href="/post/296974">said</a>:<br />
Great work on the locks.  <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" />  I bloody hated them on the Pulse I had.  :D</p>
</blockquote>
<p dir="auto">"Horses for courses" as they say, I love them on my Pulse. :)  I have heard that the ST200's locks are a good bit stiffer though.</p>
]]></description><link>https://multitool.ninja/post/297030</link><guid isPermaLink="true">https://multitool.ninja/post/297030</guid><dc:creator><![CDATA[Gareth]]></dc:creator><pubDate>Tue, 08 Dec 2009 00:55:52 GMT</pubDate></item><item><title><![CDATA[Reply to Observations on EDCing the Core on Mon, 07 Dec 2009 22:13:19 GMT]]></title><description><![CDATA[<p dir="auto">Great work on the locks.  <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" />  I bloody hated them on the Pulse I had.  :D</p>
]]></description><link>https://multitool.ninja/post/296974</link><guid isPermaLink="true">https://multitool.ninja/post/296974</guid><dc:creator><![CDATA[Benner]]></dc:creator><pubDate>Mon, 07 Dec 2009 22:13:19 GMT</pubDate></item><item><title><![CDATA[Reply to Observations on EDCing the Core on Mon, 07 Dec 2009 08:28:59 GMT]]></title><description><![CDATA[<p dir="auto">That's a very neat job. :)</p>
]]></description><link>https://multitool.ninja/post/296723</link><guid isPermaLink="true">https://multitool.ninja/post/296723</guid><dc:creator><![CDATA[Gareth]]></dc:creator><pubDate>Mon, 07 Dec 2009 08:28:59 GMT</pubDate></item><item><title><![CDATA[Reply to Observations on EDCing the Core on Mon, 07 Dec 2009 05:21:50 GMT]]></title><description><![CDATA[<p dir="auto">Thats a pretty slick mod on the ST200 locks.</p>
]]></description><link>https://multitool.ninja/post/296698</link><guid isPermaLink="true">https://multitool.ninja/post/296698</guid><dc:creator><![CDATA[David]]></dc:creator><pubDate>Mon, 07 Dec 2009 05:21:50 GMT</pubDate></item><item><title><![CDATA[Reply to Observations on EDCing the Core on Mon, 07 Dec 2009 04:51:16 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/farmer" aria-label="Profile: Farmer">@<bdi>Farmer</bdi></a> <a href="/post/284290">said</a>:<br />
** I would probably like the 200 more if didnt have the thumb locks and used the original locking system.** Guess with would only be an original with curved grips then though.</p>
</blockquote>
<p dir="auto">I liked the original SuperTool, but hated the sharp handles.  I loved the radiused handles of the ST200, but hated the thumb locks.  I ground off the thumb locks flush so it functions the same as the original.  I also modified the screwdriver bits to give me a little more reach and ground an angle on the sharp edge towards the bottom.  I have carried the ST200 in my pocket next to my Nokia phone for years.  I always check before leaving the house to make sure I have both!</p>
<p dir="auto">If I do buy the ST300, I will likely modify it to suit as well.   <img src="/assets/uploads/smileys/multitool.gif" alt=":multi:" title="multi" class="forum-smiley emoji" /></p>
<p dir="auto">EDIT:  I forgot to set the date on the camera.  Pics are from today.</p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/17670_100_2226%20(Medium).JPG" alt="100_2226 (Medium).JPG" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/17672_100_2229%20(Medium).JPG" alt="100_2229 (Medium).JPG" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/296693</link><guid isPermaLink="true">https://multitool.ninja/post/296693</guid><dc:creator><![CDATA[Philabuster]]></dc:creator><pubDate>Mon, 07 Dec 2009 04:51:16 GMT</pubDate></item><item><title><![CDATA[Reply to Observations on EDCing the Core on Wed, 25 Nov 2009 21:57:23 GMT]]></title><description><![CDATA[<p dir="auto">I would definitely send it in man like is said above the turn around time is very quick and doesn't cost that much to send and you have a new or like new tool again <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/292107</link><guid isPermaLink="true">https://multitool.ninja/post/292107</guid><dc:creator><![CDATA[Poncho65]]></dc:creator><pubDate>Wed, 25 Nov 2009 21:57:23 GMT</pubDate></item><item><title><![CDATA[Reply to Observations on EDCing the Core on Wed, 25 Nov 2009 15:59:57 GMT]]></title><description><![CDATA[<p dir="auto">They're very quick about getting your stuff back to you. I sent in my skeletool last week and got it back in less than 7 days. I just sent it in via usps.</p>
]]></description><link>https://multitool.ninja/post/292010</link><guid isPermaLink="true">https://multitool.ninja/post/292010</guid><dc:creator><![CDATA[django.cj]]></dc:creator><pubDate>Wed, 25 Nov 2009 15:59:57 GMT</pubDate></item><item><title><![CDATA[Reply to Observations on EDCing the Core on Wed, 25 Nov 2009 15:44:28 GMT]]></title><description><![CDATA[<p dir="auto">Thanks Guys. <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /><br />
I guess what gets my goat is that I just can't get in my car and go to Sears and grab a new one and be done with it! Does Craftsman make a lifetime guarantee multitool??  <img src="/assets/uploads/smileys/thinking.gif" alt=":think:" title="Thinking" class="forum-smiley emoji" /></p>
<p dir="auto">Anyway, it's been over a year since I broke my Core and making my way to the UPS center is not a priority right now. I did buy Blast and it works for now.</p>
<p dir="auto">Sorry to hijack the thread....carry on. <img src="/assets/uploads/smileys/oops2.gif" alt=":oops:" title="oops" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/292007</link><guid isPermaLink="true">https://multitool.ninja/post/292007</guid><dc:creator><![CDATA[specgrade]]></dc:creator><pubDate>Wed, 25 Nov 2009 15:44:28 GMT</pubDate></item><item><title><![CDATA[Reply to Observations on EDCing the Core on Wed, 25 Nov 2009 13:29:20 GMT]]></title><description><![CDATA[<p dir="auto">Definitely a manufacturing flaw, as I bent a ton of nails and hooks, not to mention cutting them, with my core just recently and the jaws never snapped. Just send it back and get one that isn't flawed.</p>
<p dir="auto">All manufacturers have some bad units, no matter how good they are. Most Toyotas are reliable and bulletproof, but occasionally a bad one gets through. It's how the manufacturer deals with the problem that really counts.</p>
]]></description><link>https://multitool.ninja/post/291984</link><guid isPermaLink="true">https://multitool.ninja/post/291984</guid><dc:creator><![CDATA[django.cj]]></dc:creator><pubDate>Wed, 25 Nov 2009 13:29:20 GMT</pubDate></item><item><title><![CDATA[Reply to Observations on EDCing the Core on Wed, 25 Nov 2009 03:33:32 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/davek" aria-label="Profile: DaveK">@<bdi>DaveK</bdi></a> <a href="/post/291816">said</a>:<br />
A fat midget though - be fair  ???</p>
</blockquote>
<p dir="auto"><img src="/assets/uploads/smileys/rofl.gif" alt=":rofl:" title="rofl" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/291908</link><guid isPermaLink="true">https://multitool.ninja/post/291908</guid><dc:creator><![CDATA[Poncho65]]></dc:creator><pubDate>Wed, 25 Nov 2009 03:33:32 GMT</pubDate></item><item><title><![CDATA[Reply to Observations on EDCing the Core on Tue, 24 Nov 2009 23:17:05 GMT]]></title><description><![CDATA[<p dir="auto">Ah, good point that  <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /> :D</p>
]]></description><link>https://multitool.ninja/post/291818</link><guid isPermaLink="true">https://multitool.ninja/post/291818</guid><dc:creator><![CDATA[Benner]]></dc:creator><pubDate>Tue, 24 Nov 2009 23:17:05 GMT</pubDate></item><item><title><![CDATA[Reply to Observations on EDCing the Core on Tue, 24 Nov 2009 23:16:27 GMT]]></title><description><![CDATA[<p dir="auto">A fat midget though - be fair  ???</p>
]]></description><link>https://multitool.ninja/post/291816</link><guid isPermaLink="true">https://multitool.ninja/post/291816</guid><dc:creator><![CDATA[DaveK]]></dc:creator><pubDate>Tue, 24 Nov 2009 23:16:27 GMT</pubDate></item><item><title><![CDATA[Reply to Observations on EDCing the Core on Tue, 24 Nov 2009 23:11:32 GMT]]></title><description><![CDATA[<p dir="auto">But Dave that means nothing as you are a midget.  :P</p>
]]></description><link>https://multitool.ninja/post/291812</link><guid isPermaLink="true">https://multitool.ninja/post/291812</guid><dc:creator><![CDATA[Benner]]></dc:creator><pubDate>Tue, 24 Nov 2009 23:11:32 GMT</pubDate></item><item><title><![CDATA[Reply to Observations on EDCing the Core on Tue, 24 Nov 2009 23:09:35 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/specgrade" aria-label="Profile: specgrade">@<bdi>specgrade</bdi></a> <a href="/post/291713">said</a>:</p>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/gareth" aria-label="Profile: Gareth">@<bdi>Gareth</bdi></a> <a href="/post/291707">said</a>:</p>
<blockquote>
<p dir="auto">Ouch, that sucks. :(  That sounds like a flaw to me though, rather than something that's common to the whole of the Core line.</p>
</blockquote>
<p dir="auto">Do me a favor and get a nail to replace a cotter pin on a hand truck. Take your Core and bend the nail. That's all I did.</p>
<p dir="auto">I can't tell if there is a flaw or not. Maybe I used the tool too hard and payed the price  <img src="/assets/uploads/smileys/thinking.gif" alt=":think:" title="Thinking" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">That's a flaw! Probably a bad casting as the guys have said. I've put my entire body weight on a Core's jaws many times and lifted myself off the ground!</p>
]]></description><link>https://multitool.ninja/post/291810</link><guid isPermaLink="true">https://multitool.ninja/post/291810</guid><dc:creator><![CDATA[DaveK]]></dc:creator><pubDate>Tue, 24 Nov 2009 23:09:35 GMT</pubDate></item><item><title><![CDATA[Reply to Observations on EDCing the Core on Tue, 24 Nov 2009 22:53:10 GMT]]></title><description><![CDATA[<p dir="auto">That is 1 thing on the Core that never failed me <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /> I even put a 16dd nail in it just to see if it would cut it and sure enough it snapped the nail into but I had to use my foot to have enough pressure cut the nail :o It had to have been a defect in the plier head I am sure if you tried the same thing with many other Core plier heads that it would have bent the nail and kept on truckin <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /> but it is a tough thing to have a tool fail on you :-\ Best of luck with whatever you decide to do with it man :)</p>
]]></description><link>https://multitool.ninja/post/291799</link><guid isPermaLink="true">https://multitool.ninja/post/291799</guid><dc:creator><![CDATA[Poncho65]]></dc:creator><pubDate>Tue, 24 Nov 2009 22:53:10 GMT</pubDate></item><item><title><![CDATA[Reply to Observations on EDCing the Core on Tue, 24 Nov 2009 18:45:25 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/specgrade" aria-label="Profile: specgrade">@<bdi>specgrade</bdi></a> <a href="/post/291713">said</a>:</p>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/gareth" aria-label="Profile: Gareth">@<bdi>Gareth</bdi></a> <a href="/post/291707">said</a>:</p>
<blockquote>
<p dir="auto">Ouch, that sucks. :(  That sounds like a flaw to me though, rather than something that's common to the whole of the Core line.</p>
</blockquote>
<p dir="auto">Do me a favor and get a nail to replace a cotter pin on a hand truck. Take your Core and bend the nail. That's all I did.</p>
<p dir="auto">I can't tell if there is a flaw or not. <strong>Maybe I used the tool too hard and payed the price</strong>  <img src="/assets/uploads/smileys/thinking.gif" alt=":think:" title="Thinking" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">I really don't think so, either a) you should be able to bend the nail without breaking the jaw, or b) the nail is too tough and won't bend, but you still shouldn't be able to break the jaw.</p>
<p dir="auto">The only multitool jaw I ever broke was on my Supertool and I was really stupid.  I tried to prise something free by sticking the tip of the jaw into a hole and then put a good amount of pressure on it.  Oddly enough it snapped. ::)</p>
]]></description><link>https://multitool.ninja/post/291718</link><guid isPermaLink="true">https://multitool.ninja/post/291718</guid><dc:creator><![CDATA[Gareth]]></dc:creator><pubDate>Tue, 24 Nov 2009 18:45:25 GMT</pubDate></item><item><title><![CDATA[Reply to Observations on EDCing the Core on Tue, 24 Nov 2009 18:33:10 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/gareth" aria-label="Profile: Gareth">@<bdi>Gareth</bdi></a> <a href="/post/291707">said</a>:<br />
Ouch, that sucks. :(  That sounds like a flaw to me though, rather than something that's common to the whole of the Core line.</p>
</blockquote>
<p dir="auto">Do me a favor and get a nail to replace a cotter pin on a hand truck. Take your Core and bend the nail. That's all I did.</p>
<p dir="auto">I can't tell if there is a flaw or not. Maybe I used the tool too hard and payed the price  <img src="/assets/uploads/smileys/thinking.gif" alt=":think:" title="Thinking" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/291713</link><guid isPermaLink="true">https://multitool.ninja/post/291713</guid><dc:creator><![CDATA[specgrade]]></dc:creator><pubDate>Tue, 24 Nov 2009 18:33:10 GMT</pubDate></item><item><title><![CDATA[Reply to Observations on EDCing the Core on Tue, 24 Nov 2009 18:30:37 GMT]]></title><description><![CDATA[<p dir="auto">Yeah send it back bit was probably a bad cast. I beat the crap out of my multis and I've never damaged the jaws, even on my skeletool.</p>
]]></description><link>https://multitool.ninja/post/291711</link><guid isPermaLink="true">https://multitool.ninja/post/291711</guid><dc:creator><![CDATA[django.cj]]></dc:creator><pubDate>Tue, 24 Nov 2009 18:30:37 GMT</pubDate></item><item><title><![CDATA[Reply to Observations on EDCing the Core on Tue, 24 Nov 2009 18:23:03 GMT]]></title><description><![CDATA[<p dir="auto">Ouch, that sucks. :(  That sounds like a flaw to me though, rather than something that's common to the whole of the Core line.</p>
]]></description><link>https://multitool.ninja/post/291707</link><guid isPermaLink="true">https://multitool.ninja/post/291707</guid><dc:creator><![CDATA[Gareth]]></dc:creator><pubDate>Tue, 24 Nov 2009 18:23:03 GMT</pubDate></item><item><title><![CDATA[Reply to Observations on EDCing the Core on Tue, 24 Nov 2009 18:14:18 GMT]]></title><description><![CDATA[<p dir="auto">Sure glad everyone likes the Core. Mine has a snapped off jaw just from trying to bend a finish nail. I know I know...send it back to Leatherman. Someday I will. What's the point though? I don't think I can trust the jaws after this. I wish my Core had strong jaws like the ones you guys say you have.  <img src="/assets/uploads/smileys/rant.gif" alt=":rant:" title="rant!" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/291699</link><guid isPermaLink="true">https://multitool.ninja/post/291699</guid><dc:creator><![CDATA[specgrade]]></dc:creator><pubDate>Tue, 24 Nov 2009 18:14:18 GMT</pubDate></item><item><title><![CDATA[Reply to Observations on EDCing the Core on Sun, 22 Nov 2009 04:56:45 GMT]]></title><description><![CDATA[<p dir="auto">Thanks for all the updates,really liked the snaps on the nylon sheath,and the screwdrivers on the Core are some of the best I've used,this week I'm carrying my Supertool in a Surge leather sheath,with ceramic rod and black fisher space pen.<br />
<img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" />&amp; <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/290781</link><guid isPermaLink="true">https://multitool.ninja/post/290781</guid><dc:creator><![CDATA[Smitty44]]></dc:creator><pubDate>Sun, 22 Nov 2009 04:56:45 GMT</pubDate></item><item><title><![CDATA[Reply to Observations on EDCing the Core on Sat, 21 Nov 2009 21:57:41 GMT]]></title><description><![CDATA[<p dir="auto">Observations on two more of the Core's tools that I've used:</p>
<p dir="auto">First was the <strong>Can Opener</strong>:</p>
<p dir="auto">In my experience there is a balance that needs to be met when selecting a can opener, strength versus thickness/size. For example with a P-38, you have a small thin compact tool that does the job well, but it does take 38 movements to open a 2 inch can, and with it's small size it can be tiring on your fingers. On the other hand you could have a long thick opener, that opens a can quickly, and easily, but tends to distort/bend the can lid as it cuts through. This bending doesn't matter too much for the first half of the lid, but when it begins to push the lid into the contents of the can on the second half, it ends up being a mess (not to mention the small cuts that can come from trying to get the bent lid out of the can).</p>
<p dir="auto">With the Core being such a large tool one would think that the opener would tend to be on the burly side, but Leatherman seems to have taken these issues, I mentioned, into consideration. The blade on the opener is 16mm long, and the tool itself is one of the thinnest of the fold out tools at about 1.5mm. It's beveled from the tip to 3mm past the blade. All this lends itself to a very good combination that cuts through a large amount of metal with each swing, and yet it cuts most of the can open before it starts to move the lid.</p>
<p dir="auto">Something I was concerned about with the opener, is it's position in the tool itself. With lever type openers there is a need to to have the opener perpendicular to the can, and room to swing it in order for it to function. With the Core there were two considerations, first is the thickness of the tool as a whole, second is a design element of all MTs with fold out tools that open from the interior, and that is that the working end of the tool does not point to the outside of the MT's body. But there were no problems using it at all, I continue to be impressed by the research, development,and design of this tool.</p>
<p dir="auto"><img src="http://i785.photobucket.com/albums/yy135/turnsouth/LM%20Tools/opener1.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="http://i785.photobucket.com/albums/yy135/turnsouth/LM%20Tools/opener2.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="http://i785.photobucket.com/albums/yy135/turnsouth/LM%20Tools/opener3.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Second was the <strong>Ruler</strong>:</p>
<p dir="auto">The ruler is convenient and accurate for quick measurements. The only caveat that I have is that I wish they would have marked out at least 1 inch with 1/16 inch marks. Sometimes you just need to know the length of something down to the 1/16. But for fine measurements, the millimeter ruler serves the purpose, and the lack of the 1/16 marks becomes more of inconvenience than a hindrance.</p>
<p dir="auto"><strong>Sheath Report:</strong></p>
<p dir="auto">Overall my impressions of the nylon sheath were mostly unchanged. There were just two new things that I wanted to mention, as the sheath broke in it became even more comfortable to wear, and the other was how much I loved having snaps on it, instead of Velcro.</p>
<p dir="auto">One of the main things that led me to do the mod, was when I was in the hardware store. I had recently purchased a replica wood ammo box to keep my MTs and knives in, and I was looking for hooks that I could screw into the wood. But I needed a specific length of thread on the screw end, and I thought “I can just use my Core ruler”. When I opened my sheath in the tall isle with the tile floors, it was like a Velcro megaphone. What was worse was when, after I was done using the ruler, I had to open the Velcro again with no tool in it, and it was twice as loud with the empty sheath.</p>
<p dir="auto">After replacing the Velcro with the snaps, it became a pleasure to open the sheath. As a matter of fact, I was enjoying it so much, I was hesitant to make the switch to the leather sheath. But I decided to make the switch anyway, so I could give the leather sheath a fair try also.</p>
<p dir="auto"><strong>The leather sheath:</strong></p>
<ul>
<li>
<p dir="auto">It rides higher than the nylon - It's not uncomfortable, but I did notice it more.</p>
</li>
<li>
<p dir="auto">Has quick access - Just one snap.</p>
</li>
<li>
<p dir="auto">The traditional Leatherman look - Gives an everyday working man appearance, instead of a “tactical” look.</p>
</li>
<li>
<p dir="auto">Sheath shape - I carry my Core over my right pocket, and with the nylon sheath and its tapered edges, it never got in the way of reaching into my pocket. But with the leather sheath and its squared corners, it does keep me from sliding my hand right into my pocket. It isn't always a problem, but if the sheath is in a certain place, I have to reach around, or move it to get into my pocket.</p>
</li>
<li>
<p dir="auto">With the design of the nylon sheath the tool is gripped tighter and requires a little consecration to get it back into the sheath. But with the leather sheath, and its preformed shape, the Core goes in and out of the sheath quickly. I found it easier to use when I was doing something that required focused attention. Although there was one small inconvenience. With the shape of the Core, and it not being tapered at the pliers end, when the sheath was new the tool would catch on the brass rivets at the bottom of the sheath as it was inserted. But this went away after a few days as the brass wore slightly and became less sharp on the end.</p>
</li>
<li>
<p dir="auto">Real leather - gets scratches, dents and dings. Gives it some personality.</p>
</li>
<li>
<p dir="auto">One thing that have found with leather sheaths, and using them in EDC with a tool that is used often, is that they “break-in” like all leather items, they will become soft and supple. Whether this is a good thing, for the most part, is just a matter of personal preference. Some like the new looking firm leather, others like when the leather softens, and the edges loose their finish giving it the “well used” look. I have found in the past, (with my ST200) that when the leather does soften, the snap becomes stronger than the leather. Not that it cannot be opened, but that the closure flap feels like it's stretching when it's pulled on to open the tool. Like I said it's more a matter of personal preference.</p>
</li>
</ul>
<p dir="auto">The Core in it's all leather outfit:</p>
<p dir="auto"><img src="http://i785.photobucket.com/albums/yy135/turnsouth/LM%20Tools/Leather2.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="http://i785.photobucket.com/albums/yy135/turnsouth/LM%20Tools/Leather4.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="http://i785.photobucket.com/albums/yy135/turnsouth/LM%20Tools/Leather5.jpg" alt="" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/290641</link><guid isPermaLink="true">https://multitool.ninja/post/290641</guid><dc:creator><![CDATA[turnsouth]]></dc:creator><pubDate>Sat, 21 Nov 2009 21:57:41 GMT</pubDate></item><item><title><![CDATA[Reply to Observations on EDCing the Core on Sun, 08 Nov 2009 14:09:05 GMT]]></title><description><![CDATA[<p dir="auto">Core Freaks....  ::) ::)</p>
<p dir="auto">Great writeup, turnsouth  <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /><br />
and I'm still drooling over the pictures from both of you.  :o :D</p>
]]></description><link>https://multitool.ninja/post/285687</link><guid isPermaLink="true">https://multitool.ninja/post/285687</guid><dc:creator><![CDATA[AHB]]></dc:creator><pubDate>Sun, 08 Nov 2009 14:09:05 GMT</pubDate></item></channel></rss>