<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0"><channel><title><![CDATA[Some Basic Tool Truths Everyone Should Be Aware Of]]></title><description><![CDATA[<p dir="auto">Noticing that many newer members often ask similar questions about what tools are better than others, what's the best and so on, I thought it might be a good idea to toss out some basic laws of the Multitool world, that may seem pretty basic to us, but may not be evident to folks without as much time on their hands as we do!  :D</p>
<p dir="auto">Feel free to add to the list as you guys think of them....</p>
<ol>
<li>
<p dir="auto">No multitool can outperform a dedicated tool.  Multitools are a convenience factor- they are the tools you have with you that can perform a multitude of tasks reasonably well when carrying a full tool box is not an option.  While multitools have managed to increase their overall usefulness over the years, they simply cannot compete with dedicated tools, except in the fact that you will likely have your multitool handy when dedicated tools are not.</p>
</li>
<li>
<p dir="auto">Any quality multitool from a decent manufacturer is likely to do whatever job you want done- it's a simple matter of options.  Any Leatherman, or SOG or Victorinox is going to stand up to whatever punishment the average person is likely to dish out.  Yes, some are a little stronger (Surge, PowerLock etc) but very few people are capable of crushing any tools- even the Juice or Freestyle, which are very lightweight tools.  Any quality tool is going to work for whatever folks want, and it's really a simple matter of deciding whether scissors or a saw is more important to you, and the cost or availability.</p>
</li>
</ol>
<p dir="auto">Any other laws of the Multitool World?</p>
<p dir="auto">Def</p>
]]></description><link>https://multitool.ninja/topic/15259/some-basic-tool-truths-everyone-should-be-aware-of</link><generator>RSS for Node</generator><lastBuildDate>Mon, 16 Nov 2026 21:19:24 GMT</lastBuildDate><atom:link href="https://multitool.ninja/topic/15259.rss" rel="self" type="application/rss+xml"/><pubDate>Thu, 19 Nov 2009 03:37:12 GMT</pubDate><ttl>60</ttl><item><title><![CDATA[Reply to Some Basic Tool Truths Everyone Should Be Aware Of on Fri, 20 Nov 2009 11:10:11 GMT]]></title><description><![CDATA[<p dir="auto">AKA 100 knot tape , and gun tape ( can't forget our friends in the artillery !</p>
<p dir="auto">Chris</p>
]]></description><link>https://multitool.ninja/post/290157</link><guid isPermaLink="true">https://multitool.ninja/post/290157</guid><dc:creator><![CDATA[Styerman]]></dc:creator><pubDate>Fri, 20 Nov 2009 11:10:11 GMT</pubDate></item><item><title><![CDATA[Reply to Some Basic Tool Truths Everyone Should Be Aware Of on Fri, 20 Nov 2009 04:05:07 GMT]]></title><description><![CDATA[<p dir="auto">I had some olive drab duct tape which I think the military used to use and it was excellent.</p>
]]></description><link>https://multitool.ninja/post/290078</link><guid isPermaLink="true">https://multitool.ninja/post/290078</guid><dc:creator><![CDATA[american lockpicker]]></dc:creator><pubDate>Fri, 20 Nov 2009 04:05:07 GMT</pubDate></item><item><title><![CDATA[Reply to Some Basic Tool Truths Everyone Should Be Aware Of on Fri, 20 Nov 2009 03:27:15 GMT]]></title><description><![CDATA[<p dir="auto">Duck tape is like everything else. The more you spend the higher quality it generally is. Gorilla brand tape is wonderful, and Duck brand makes great tape too. I just got some industrial strength duck brand tape and it's wonderful. IIRC they also have contractor, professional and general grade tape too. All with varying prices and quality.</p>
<p dir="auto">I also got some duck tape at the dollar store and it was very mediocre. However, I was just using it to seal up a box I'm going to use as a BB gun and slingshot target and backstop so I didn't need really good stuff.</p>
]]></description><link>https://multitool.ninja/post/290071</link><guid isPermaLink="true">https://multitool.ninja/post/290071</guid><dc:creator><![CDATA[ducktapehero]]></dc:creator><pubDate>Fri, 20 Nov 2009 03:27:15 GMT</pubDate></item><item><title><![CDATA[Reply to Some Basic Tool Truths Everyone Should Be Aware Of on Fri, 20 Nov 2009 03:05:37 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/ducktapehero" aria-label="Profile: ducktapehero">@<bdi>ducktapehero</bdi></a> <a href="/post/289974">said</a>:</p>
<p dir="auto">@american lockpicker <a href="/post/289888">said</a>:</p>
<blockquote></blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/ducktapehero" aria-label="Profile: ducktapehero">@<bdi>ducktapehero</bdi></a> <a href="/post/289741">said</a>:</p>
<blockquote>
<blockquote></blockquote>
</blockquote>
<p dir="auto">@american lockpicker <a href="/post/289673">said</a>:</p>
<blockquote>
<blockquote>
<blockquote>
<p dir="auto">When in doubt get a Victorinox.</p>
</blockquote>
<p dir="auto">I gotta agree with this.</p>
<p dir="auto">Here's another rule. Get more duck tape.</p>
</blockquote>
<p dir="auto">Heres another good thing that gets no mention on here JB Weld. Also Gorilla Tape is good.</p>
</blockquote>
<p dir="auto">Yes, JB Weld is good, and gorilla tape is simply super strong duck tape. But it IS good. Pricey though.</p>
</blockquote>
<p dir="auto">I paid $8 a roll but I've used it to repair something costing hundreds before(door) so it can pay for itself. Previously I used duct tape which wasn't quite up to the task.</p>
]]></description><link>https://multitool.ninja/post/290068</link><guid isPermaLink="true">https://multitool.ninja/post/290068</guid><dc:creator><![CDATA[american lockpicker]]></dc:creator><pubDate>Fri, 20 Nov 2009 03:05:37 GMT</pubDate></item><item><title><![CDATA[Reply to Some Basic Tool Truths Everyone Should Be Aware Of on Fri, 20 Nov 2009 00:22:16 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/whoey" aria-label="Profile: Whoey">@<bdi>Whoey</bdi></a> <a href="/post/289729">said</a>:<br />
When I worked as a purchaser for an electronics manufacturing company in BC, Canada, we found places that would provide us superior quality product at lower prices made in China as long as we placed larger orders. The local supplier could not compete with quality, price or lead time on those quantities, so we went with made in China. Any bad parts were refunded provided we proved it was not design related, and actually a manufacturing flaw, in which case they would ship us replacements immediately.</p>
<p dir="auto">The parts in question were circuit boards, something that is very complex, and can go wrong very easily. The Chinese ones were gold plated contacts and the quality was top notch.</p>
<p dir="auto">While I'm sure there are manufacturers that have lower standards with even lower prices, sometimes it really is you get what you pay for... if you go for the absolute cheapest, there's probably a good reason.</p>
<p dir="auto">it's the difference between a box of generic wine and a nice bottle of Gran Reserva Rioja.</p>
</blockquote>
<p dir="auto">It's my understanding that the very process of precision QA and material standards began to be adopted somewhere around 2000 in China.  It's after that that some really high quality stuff started to come from there.  I've purchased some pretty nice machinists calipers from there for a fraction of the cost of US brands.  The quality of the metal and movement was excellent.</p>
]]></description><link>https://multitool.ninja/post/289996</link><guid isPermaLink="true">https://multitool.ninja/post/289996</guid><dc:creator><![CDATA[FrankenPC]]></dc:creator><pubDate>Fri, 20 Nov 2009 00:22:16 GMT</pubDate></item><item><title><![CDATA[Reply to Some Basic Tool Truths Everyone Should Be Aware Of on Thu, 19 Nov 2009 23:35:51 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto">@american lockpicker <a href="/post/289888">said</a>:</p>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/ducktapehero" aria-label="Profile: ducktapehero">@<bdi>ducktapehero</bdi></a> <a href="/post/289741">said</a>:</p>
<blockquote></blockquote>
<p dir="auto">@american lockpicker <a href="/post/289673">said</a>:</p>
<blockquote>
<blockquote>
<p dir="auto">When in doubt get a Victorinox.</p>
</blockquote>
<p dir="auto">I gotta agree with this.</p>
<p dir="auto">Here's another rule. Get more duck tape.</p>
</blockquote>
<p dir="auto">Heres another good thing that gets no mention on here JB Weld. Also Gorilla Tape is good.</p>
</blockquote>
<p dir="auto">Yes, JB Weld is good, and gorilla tape is simply super strong duck tape. But it IS good. Pricey though.</p>
]]></description><link>https://multitool.ninja/post/289974</link><guid isPermaLink="true">https://multitool.ninja/post/289974</guid><dc:creator><![CDATA[ducktapehero]]></dc:creator><pubDate>Thu, 19 Nov 2009 23:35:51 GMT</pubDate></item><item><title><![CDATA[Reply to Some Basic Tool Truths Everyone Should Be Aware Of on Thu, 19 Nov 2009 22:54:16 GMT]]></title><description><![CDATA[<p dir="auto">Its my experiance that for EDC multitool its not the question of what tool you need its a question of what multitool you are willing to carry with comfort.<br />
And yes there is a Multitool arms race going on in this forum ask chako and J-sew  :D :D :D</p>
]]></description><link>https://multitool.ninja/post/289954</link><guid isPermaLink="true">https://multitool.ninja/post/289954</guid><dc:creator><![CDATA[duckman1975]]></dc:creator><pubDate>Thu, 19 Nov 2009 22:54:16 GMT</pubDate></item><item><title><![CDATA[Reply to Some Basic Tool Truths Everyone Should Be Aware Of on Thu, 19 Nov 2009 22:38:26 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto">Hmm I was under the impression that shear cutter was used on stranded cable because anvil cutter will squish it. I was more thinking of bolt cutters that are all anvil type, but I'm not an expert on tools so I could be wrong.</p>
</blockquote>
<p dir="auto">Yea, the thing about dedicated cutting tools is they can be very job specific. I've spend a nice chunk of change so far on different types of cutters, and I don't have near the amount of some people.</p>
<p dir="auto">But now thats what I want, a multi with a bolt cutting head!</p>
]]></description><link>https://multitool.ninja/post/289947</link><guid isPermaLink="true">https://multitool.ninja/post/289947</guid><dc:creator><![CDATA[gafftapegreenia]]></dc:creator><pubDate>Thu, 19 Nov 2009 22:38:26 GMT</pubDate></item><item><title><![CDATA[Reply to Some Basic Tool Truths Everyone Should Be Aware Of on Thu, 19 Nov 2009 21:21:27 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/pacu" aria-label="Profile: Pacu">@<bdi>Pacu</bdi></a> <a href="/post/289913">said</a>:<br />
Multitool truth...</p>
<p dir="auto">The person posting above you and below has better tools than you and they know it. They are all laughing at your tiny collection.  Better buy another to keep up. &gt;:D <img src="/assets/uploads/smileys/poke2.gif" alt=":pok:" title="pok" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">Wow, that is so deep Pacu. Good one! <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /> :D</p>
]]></description><link>https://multitool.ninja/post/289916</link><guid isPermaLink="true">https://multitool.ninja/post/289916</guid><dc:creator><![CDATA[J-sews]]></dc:creator><pubDate>Thu, 19 Nov 2009 21:21:27 GMT</pubDate></item><item><title><![CDATA[Reply to Some Basic Tool Truths Everyone Should Be Aware Of on Thu, 19 Nov 2009 21:15:44 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/duckman1975" aria-label="Profile: duckman1975">@<bdi>duckman1975</bdi></a> <a href="/post/289735">said</a>:<br />
<a href="http://MT.ORG" rel="nofollow ugc">MT.ORG</a> motto: "when in doubt buy both"</p>
</blockquote>
<p dir="auto">Words to live by.  :D</p>
]]></description><link>https://multitool.ninja/post/289914</link><guid isPermaLink="true">https://multitool.ninja/post/289914</guid><dc:creator><![CDATA[american lockpicker]]></dc:creator><pubDate>Thu, 19 Nov 2009 21:15:44 GMT</pubDate></item><item><title><![CDATA[Reply to Some Basic Tool Truths Everyone Should Be Aware Of on Thu, 19 Nov 2009 21:14:08 GMT]]></title><description><![CDATA[<p dir="auto">Multitool truth...</p>
<p dir="auto">The person posting above you and below has better tools than you and they know it. They are all laughing at your tiny collection.  Better buy another to keep up. &gt;:D <img src="/assets/uploads/smileys/poke2.gif" alt=":pok:" title="pok" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/289913</link><guid isPermaLink="true">https://multitool.ninja/post/289913</guid><dc:creator><![CDATA[Pacu]]></dc:creator><pubDate>Thu, 19 Nov 2009 21:14:08 GMT</pubDate></item><item><title><![CDATA[Reply to Some Basic Tool Truths Everyone Should Be Aware Of on Thu, 19 Nov 2009 20:43:15 GMT]]></title><description><![CDATA[<p dir="auto">Another multitool law:<br />
Rust is never really an issue.<br />
Now, this may be a PERSONAL issue, as would be the case in deciding whether to buy a Leatherman, or a SOG, but as for the function of the said tool itself, this is not an issue.  Many has been the time, growing up, that my uncle would send me downstairs to retrieve his wrench, screwdriver, or pliers, only for me to go to his tool box and grab what seemed to be an incredibly rusty tool.  Yet it still did the job and worked just fine.  Multitools are, after all, tools that are meant to be used and often times, used hard.  They were made to work.  Many of us like to keep our multitools in pristene condition, and that's fine if it's your personal choice.  However, I have to laugh when people talk about Leatherman rusting.  Really?  I have never had a Leatherman rust on me.  Ever.  I have had some light surface rust develop on spots, but that's not a tool "rusting".  A wipe with my bandana gets that right off.  I usually don't even remove any "rust" spots that may appear.  I have carried and used the same Leatherman Wave for almost five years.  I have used it in different environments.  Hot, humid, sandy conditions, out in the salt water, had it submerged for hours in fresh water, in the cold, used it up north in the salty, snowy conditions of winter, and it has very VERY few rust spots on it.  I leave them there.  It is a tool and should show it's use.  Interestingly enough, many of these rust stains have disappeared on their own with use.<br />
So again, another rule of the multitool world, rust is never a tool issue.  Just an owner issue.</p>
]]></description><link>https://multitool.ninja/post/289896</link><guid isPermaLink="true">https://multitool.ninja/post/289896</guid><dc:creator><![CDATA[LatinoHeat]]></dc:creator><pubDate>Thu, 19 Nov 2009 20:43:15 GMT</pubDate></item><item><title><![CDATA[Reply to Some Basic Tool Truths Everyone Should Be Aware Of on Thu, 19 Nov 2009 20:28:28 GMT]]></title><description><![CDATA[<p dir="auto">JB Weld should get its own forum.  :D</p>
]]></description><link>https://multitool.ninja/post/289889</link><guid isPermaLink="true">https://multitool.ninja/post/289889</guid><dc:creator><![CDATA[Mr. Whippy]]></dc:creator><pubDate>Thu, 19 Nov 2009 20:28:28 GMT</pubDate></item><item><title><![CDATA[Reply to Some Basic Tool Truths Everyone Should Be Aware Of on Thu, 19 Nov 2009 20:27:05 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/ducktapehero" aria-label="Profile: ducktapehero">@<bdi>ducktapehero</bdi></a> <a href="/post/289741">said</a>:</p>
<p dir="auto">@american lockpicker <a href="/post/289673">said</a>:</p>
<blockquote>
<p dir="auto">When in doubt get a Victorinox.</p>
</blockquote>
<p dir="auto">I gotta agree with this.</p>
<p dir="auto">Here's another rule. Get more duck tape.</p>
</blockquote>
<p dir="auto">Heres another good thing that gets no mention on here JB Weld. Also Gorilla Tape is good.</p>
]]></description><link>https://multitool.ninja/post/289888</link><guid isPermaLink="true">https://multitool.ninja/post/289888</guid><dc:creator><![CDATA[american lockpicker]]></dc:creator><pubDate>Thu, 19 Nov 2009 20:27:05 GMT</pubDate></item><item><title><![CDATA[Reply to Some Basic Tool Truths Everyone Should Be Aware Of on Thu, 19 Nov 2009 20:15:17 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/benner" aria-label="Profile: Benner">@<bdi>Benner</bdi></a> <a href="/post/289725">said</a>:<br />
So, any more basic tool truths we should all be aware of?</p>
</blockquote>
<p dir="auto">When in doubt, start at the beginning... There's alot of love here at MT.O for the retired LM tools: PST, PST II, Sideclip, Pulse ect...<br />
Carrying a MT doesn't have to be complicated..  ;)</p>
]]></description><link>https://multitool.ninja/post/289882</link><guid isPermaLink="true">https://multitool.ninja/post/289882</guid><dc:creator><![CDATA[AHB]]></dc:creator><pubDate>Thu, 19 Nov 2009 20:15:17 GMT</pubDate></item><item><title><![CDATA[Reply to Some Basic Tool Truths Everyone Should Be Aware Of on Thu, 19 Nov 2009 20:03:32 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/gafftapegreenia" aria-label="Profile: gafftapegreenia">@<bdi>gafftapegreenia</bdi></a> <a href="/post/289850">said</a>:</p>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/jzmtl" aria-label="Profile: jzmtl">@<bdi>jzmtl</bdi></a> <a href="/post/289607">said</a>:</p>
<blockquote>
<p dir="auto">and bypass cutter found on most MT's is not as strong as anvil cutter on dedicated pliers, you will damage it by cutting through thick steel wires.</p>
</blockquote>
<p dir="auto">Just to split hairs, but the most heavy duty cutters for large gauge hardened wire and stranded aircraft cable use "shearing-type" bypass cutters, (Like on fencing pliers) not anvil cutters. Using anvil cutters on such material can damaged one's expensive, dedicated pliers (Like side-cutting Linesman's or Diagonal Cutting Pliers) Of course my my own personal rant are people who buy a $5 pair of dikes and expect them to work as well as a $25 pair from Klein.</p>
<p dir="auto">However I really have to agree with you, while the cutters on one's multi will work once in a while or in a pinch on something way out of their league, in day to day use, that's just not what they are designed for.</p>
<p dir="auto">As for laws, I think one of our best ones is:</p>
<p dir="auto">What is the best multi tool? The one you have with you when you need it!</p>
</blockquote>
<p dir="auto">Hmm I was under the impression that shear cutter was used on stranded cable because anvil cutter will squish it. I was more thinking of bolt cutters that are all anvil type, but I'm not an expert on tools so I could be wrong.</p>
]]></description><link>https://multitool.ninja/post/289874</link><guid isPermaLink="true">https://multitool.ninja/post/289874</guid><dc:creator><![CDATA[jzmtl]]></dc:creator><pubDate>Thu, 19 Nov 2009 20:03:32 GMT</pubDate></item><item><title><![CDATA[Reply to Some Basic Tool Truths Everyone Should Be Aware Of on Thu, 19 Nov 2009 18:56:53 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/jzmtl" aria-label="Profile: jzmtl">@<bdi>jzmtl</bdi></a> <a href="/post/289607">said</a>:<br />
and bypass cutter found on most MT's is not as strong as anvil cutter on dedicated pliers, you will damage it by cutting through thick steel wires.</p>
</blockquote>
<p dir="auto">Just to split hairs, but the most heavy duty cutters for large gauge hardened wire and stranded aircraft cable use "shearing-type" bypass cutters, (Like on fencing pliers) not anvil cutters. Using anvil cutters on such material can damaged one's expensive, dedicated pliers (Like side-cutting Linesman's or Diagonal Cutting Pliers) Of course my my own personal rant are people who buy a $5 pair of dikes and expect them to work as well as a $25 pair from Klein.</p>
<p dir="auto">However I really have to agree with you, while the cutters on one's multi will work once in a while or in a pinch on something way out of their league, in day to day use, that's just not what they are designed for.</p>
<p dir="auto">As for laws, I think one of our best ones is:</p>
<p dir="auto">What is the best multi tool? The one you have with you when you need it!</p>
]]></description><link>https://multitool.ninja/post/289850</link><guid isPermaLink="true">https://multitool.ninja/post/289850</guid><dc:creator><![CDATA[gafftapegreenia]]></dc:creator><pubDate>Thu, 19 Nov 2009 18:56:53 GMT</pubDate></item><item><title><![CDATA[Reply to Some Basic Tool Truths Everyone Should Be Aware Of on Thu, 19 Nov 2009 15:54:59 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/buzzbait" aria-label="Profile: Buzzbait">@<bdi>Buzzbait</bdi></a> <a href="/post/289733">said</a>:<br />
This is not true.............................................. The moon is not a non-moist environment.   <img src="/assets/uploads/smileys/rofl.gif" alt=":rofl:" title="rofl" class="forum-smiley emoji" /></p>
<p dir="auto"><a href="http://www.space.com/scienceastronomy/091113-lcross-moon-crash-water-discovery.html" rel="nofollow ugc">http://www.space.com/scienceastronomy/091113-lcross-moon-crash-water-discovery.html</a></p>
</blockquote>
<p dir="auto">:ahhh</p>
<p dir="auto">;)</p>
<p dir="auto">A.</p>
]]></description><link>https://multitool.ninja/post/289769</link><guid isPermaLink="true">https://multitool.ninja/post/289769</guid><dc:creator><![CDATA[andrea.from.roma]]></dc:creator><pubDate>Thu, 19 Nov 2009 15:54:59 GMT</pubDate></item><item><title><![CDATA[Reply to Some Basic Tool Truths Everyone Should Be Aware Of on Thu, 19 Nov 2009 15:32:48 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/turbov21" aria-label="Profile: turbov21">@<bdi>turbov21</bdi></a> <a href="/post/289740">said</a>:</p>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/benner" aria-label="Profile: Benner">@<bdi>Benner</bdi></a> <a href="/post/289725">said</a>:</p>
<blockquote>
<p dir="auto">So, any more basic tool truths we should all be aware of?</p>
</blockquote>
<p dir="auto">This may be a bit backwards, because I'm a bit backwards, but if you're a newbie to tools at all, don't let multitools prevent you from picking up regular tools.  I remember when <a href="/topic/10408">I got my Husky</a>, I thought it would be the only wrench I'd ever need because why would you want a wrench that wasn't also a knife and pliers.  Let your multitool be the start of your toolbox, not the entire thing.  (I think that may be the first thing Grant said in the original post, just backwards.)</p>
<p dir="auto">Also, if you're going to carry a bag, don't be overly concerned about the weight of your multitool.  If you're lugging a bag, a few more ounces won't be unmanageable.</p>
</blockquote>
<p dir="auto">You are absolutely right on the dedicated tool thing.</p>
<p dir="auto">And when it comes to weight, I've personally never considered it an issue as I carry more pounds than I need to on my mid section than saving a couple ounces on a multitool would be able to offset!</p>
<p dir="auto">Def</p>
]]></description><link>https://multitool.ninja/post/289749</link><guid isPermaLink="true">https://multitool.ninja/post/289749</guid><dc:creator><![CDATA[Grant Lamontagne]]></dc:creator><pubDate>Thu, 19 Nov 2009 15:32:48 GMT</pubDate></item><item><title><![CDATA[Reply to Some Basic Tool Truths Everyone Should Be Aware Of on Thu, 19 Nov 2009 15:21:18 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto">@american lockpicker <a href="/post/289673">said</a>:<br />
When in doubt get a Victorinox.</p>
</blockquote>
<p dir="auto">I gotta agree with this.</p>
<p dir="auto">Here's another rule. Get more duck tape.</p>
]]></description><link>https://multitool.ninja/post/289741</link><guid isPermaLink="true">https://multitool.ninja/post/289741</guid><dc:creator><![CDATA[ducktapehero]]></dc:creator><pubDate>Thu, 19 Nov 2009 15:21:18 GMT</pubDate></item><item><title><![CDATA[Reply to Some Basic Tool Truths Everyone Should Be Aware Of on Thu, 19 Nov 2009 15:15:50 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/benner" aria-label="Profile: Benner">@<bdi>Benner</bdi></a> <a href="/post/289725">said</a>:<br />
So, any more basic tool truths we should all be aware of?</p>
</blockquote>
<p dir="auto">This may be a bit backwards, because I'm a bit backwards, but if you're a newbie to tools at all, don't let multitools prevent you from picking up regular tools.  I remember when <a href="/topic/10408">I got my Husky</a>, I thought it would be the only wrench I'd ever need because why would you want a wrench that wasn't also a knife and pliers.  Let your multitool be the start of your toolbox, not the entire thing.  (I think that may be the first thing Grant said in the original post, just backwards.)</p>
<p dir="auto">Also, if you're going to carry a bag, don't be overly concerned about the weight of your multitool.  If you're lugging a bag, a few more ounces won't be unmanageable.</p>
]]></description><link>https://multitool.ninja/post/289740</link><guid isPermaLink="true">https://multitool.ninja/post/289740</guid><dc:creator><![CDATA[turbov21]]></dc:creator><pubDate>Thu, 19 Nov 2009 15:15:50 GMT</pubDate></item><item><title><![CDATA[Reply to Some Basic Tool Truths Everyone Should Be Aware Of on Thu, 19 Nov 2009 14:53:46 GMT]]></title><description><![CDATA[<p dir="auto">I'd always advise people to think about what tools they will ever be <em>likely</em> to use and work up from there.</p>
<p dir="auto">For example, do you really need all the bells and whistles of a Surge or will a simple Kick get you by?  Now it may be that blade exchanger and outside blades etc are just what you are after, but that's not the case for everyone.  If all you need are a couple of driver and a pair of pliers then there is nothing wrong with a Kick. <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/289737</link><guid isPermaLink="true">https://multitool.ninja/post/289737</guid><dc:creator><![CDATA[Gareth]]></dc:creator><pubDate>Thu, 19 Nov 2009 14:53:46 GMT</pubDate></item><item><title><![CDATA[Reply to Some Basic Tool Truths Everyone Should Be Aware Of on Thu, 19 Nov 2009 14:50:06 GMT]]></title><description><![CDATA[<p dir="auto"><a href="http://MT.ORG" rel="nofollow ugc">MT.ORG</a> motto: "when in doubt buy both"</p>
]]></description><link>https://multitool.ninja/post/289735</link><guid isPermaLink="true">https://multitool.ninja/post/289735</guid><dc:creator><![CDATA[duckman1975]]></dc:creator><pubDate>Thu, 19 Nov 2009 14:50:06 GMT</pubDate></item><item><title><![CDATA[Reply to Some Basic Tool Truths Everyone Should Be Aware Of on Thu, 19 Nov 2009 14:46:53 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/andreafromroma" aria-label="Profile: andrea.from.roma">@<bdi>andrea.from.roma</bdi></a> <a href="/post/289662">said</a>:<br />
Rust resistance is a key factor unless either you do like rust or live in a non-moist environment (aka the moon).</p>
</blockquote>
<p dir="auto">This is not true.............................................. The moon is not a non-moist environment.   <img src="/assets/uploads/smileys/rofl.gif" alt=":rofl:" title="rofl" class="forum-smiley emoji" /></p>
<p dir="auto"><a href="http://www.space.com/scienceastronomy/091113-lcross-moon-crash-water-discovery.html" rel="nofollow ugc">http://www.space.com/scienceastronomy/091113-lcross-moon-crash-water-discovery.html</a></p>
]]></description><link>https://multitool.ninja/post/289733</link><guid isPermaLink="true">https://multitool.ninja/post/289733</guid><dc:creator><![CDATA[Buzzbait]]></dc:creator><pubDate>Thu, 19 Nov 2009 14:46:53 GMT</pubDate></item></channel></rss>