<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0"><channel><title><![CDATA[Leatherman Disassembly Tool]]></title><description><![CDATA[<p dir="auto">I thought Skunkbad's idea of using JB Weld putty as a means too make a LM knurled fastener removal tool was a real goodun. I thought I would give it a crack. Got some JB Weld putty via UK Ebay for a great price (not readily available in OZ). I made 5-6 duds  ::), fortunately a PST awl removes hardened JB putty fairly easily  :D :D. I found it hard to get a even impression when using my hand to push the LM fastener into the putty &gt;:(. So I used my drill press as a pseudo hydraulic press , I put the fastener in the drill chuck &amp; the sockets with the putty in it in the drill clamp. I got some good impressions even though it is a bit tricky as the putty expands &amp; mushrooms. It is meant too mushroom to aid adhesion &amp; plugging , like in a holed fuel tank or radiator , so I can not complain.</p>
<p dir="auto"><img src="http://i291.photobucket.com/albums/ll287/multimat426/Fastner%20tool/S6304125.jpg" alt="" class="img-markdown  img-fluid" /><br />
Note the different sizes , even though I used the same fastener to make all the impressions , this is due too the mushrooming effect which I could combat to a degree with packing the socket's base &amp; placing the socket upside down on a flat surface.</p>
<p dir="auto"><img src="http://i291.photobucket.com/albums/ll287/multimat426/Fastner%20tool/S6304127.jpg" alt="" class="img-markdown  img-fluid" /><br />
I got 2 or 3 usable tools , BUT when in use the abrasive/rough  nature of the LM fastener strips the pattern out  :'( :'(.</p>
<p dir="auto">I have been giving this question a bit of thought &amp; the reason for the post is; does anyone know if instead of putty if I plugged the socket with a hard solder &amp; then used my vice again to press a knurled fastener pattern into the solder. Would the solder be hard enough to take a pattern &amp; be used.<br />
Would welding up/plugging a socket be a better option than solder &amp; what material would you use to plug the socket <img src="/assets/uploads/smileys/thinking.gif" alt=":think:" title="Thinking" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/thinking.gif" alt=":think:" title="Thinking" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/thinking.gif" alt=":think:" title="Thinking" class="forum-smiley emoji" /></p>
<p dir="auto">I like the idea of plugging a socket &amp; then filing the surface down perfectly flat &amp; then pressing the fastener into it. I think you would get a better pattern &amp; tool than the one I got using a unplugged socket &amp; using my vise to press the pattern in.</p>
<p dir="auto"><img src="http://i291.photobucket.com/albums/ll287/multimat426/multitools/c0bf5917.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i291.photobucket.com/albums/ll287/multimat426/multitools/2e3fac83.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Any plugging ideas guys  :D :D :D</p>
]]></description><link>https://multitool.ninja/topic/18181/leatherman-disassembly-tool</link><generator>RSS for Node</generator><lastBuildDate>Fri, 20 Nov 2026 01:37:22 GMT</lastBuildDate><atom:link href="https://multitool.ninja/topic/18181.rss" rel="self" type="application/rss+xml"/><pubDate>Fri, 12 Mar 2010 01:48:11 GMT</pubDate><ttl>60</ttl><item><title><![CDATA[Reply to Leatherman Disassembly Tool on Sat, 13 Mar 2010 05:52:52 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/multimat" aria-label="Profile: MultiMat">@<bdi>MultiMat</bdi></a> <a href="/post/343050">said</a>:<br />
Mr. Crunch too the rescue Ponch  <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" />, the Crunch is just holding the fastener &amp; the socket is doing the work,so risk of shagging the fastener is a lot less  :D :D.<br />
I hope I can make a  couple good ones this weekend :D :D</p>
</blockquote>
<p dir="auto">I hope they turn out for ya MM <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /> Crunch is a fine tool for the job ;) :D</p>
]]></description><link>https://multitool.ninja/post/343614</link><guid isPermaLink="true">https://multitool.ninja/post/343614</guid><dc:creator><![CDATA[Poncho65]]></dc:creator><pubDate>Sat, 13 Mar 2010 05:52:52 GMT</pubDate></item><item><title><![CDATA[Reply to Leatherman Disassembly Tool on Fri, 12 Mar 2010 18:56:42 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/multimat" aria-label="Profile: MultiMat">@<bdi>MultiMat</bdi></a> <a href="/post/342896">said</a>:<br />
Paul here are some other options mate</p>
<p dir="auto"><div class="card col-md-9 col-lg-6 position-relative link-preview p-0">



<a href="https://multitool.ninja/topic/4655/another-hack-for-the-leatherman-knurled-screws/1?lang&#x3D;en-GB" title="Another hack for the Leatherman knurled screws.">
<img src="https://multitool.ninja/assets/uploads/category/116-mod-squad.png" class="card-img-top not-responsive" style="max-height: 15rem;" alt="Link Preview Image" onerror="this.parentElement.remove()" />
</a>







<div class="card-body">
<h5 class="card-title">
<a class="text-decoration-none" href="https://multitool.ninja/topic/4655/another-hack-for-the-leatherman-knurled-screws/1?lang&#x3D;en-GB">
Another hack for the Leatherman knurled screws.
</a>
</h5>
<p class="card-text line-clamp-3">Once again boredom serves as the motivation for innovation. I was washing my EDC Kick for a comparative rust review when I was struck by this idea. I don&#x27;t t...</p>
</div>
<a href="https://multitool.ninja/topic/4655/another-hack-for-the-leatherman-knurled-screws/1?lang&#x3D;en-GB" class="card-footer text-body-secondary small d-flex gap-2 align-items-center lh-2">



<img src="https://multitool.ninja/favicon.ico?v&#x3D;2" alt="favicon" class="not-responsive overflow-hiddden" style="max-width: 21px; max-height: 21px;" onerror="this.remove()"/>

















<p class="d-inline-block text-truncate mb-0">Multitool.Org Forum <span class="text-secondary">(multitool.ninja)</span></p>
</a>
</div></p>
<p dir="auto"><div class="card col-md-9 col-lg-6 position-relative link-preview p-0">



<a href="https://multitool.ninja/topic/7167/dismantling-leatherman-toolswinning-the-war-on-knurled-knobs/1?lang&#x3D;en-GB" title="Dismantling Leatherman Tools(Winning The War on Knurled Knobs)">
<img src="https://multitool.ninja/assets/uploads/category/116-mod-squad.png" class="card-img-top not-responsive" style="max-height: 15rem;" alt="Link Preview Image" onerror="this.parentElement.remove()" />
</a>







<div class="card-body">
<h5 class="card-title">
<a class="text-decoration-none" href="https://multitool.ninja/topic/7167/dismantling-leatherman-toolswinning-the-war-on-knurled-knobs/1?lang&#x3D;en-GB">
Dismantling Leatherman Tools(Winning The War on Knurled Knobs)
</a>
</h5>
<p class="card-text line-clamp-3">Seeing Kwakster&#x27;s specialized tools got me thinking  . Sponny&#x27;s (spoonrobot) excellent post/topic/4655 and Goldy(Goldmeister) terrific ideas in the same post...</p>
</div>
<a href="https://multitool.ninja/topic/7167/dismantling-leatherman-toolswinning-the-war-on-knurled-knobs/1?lang&#x3D;en-GB" class="card-footer text-body-secondary small d-flex gap-2 align-items-center lh-2">



<img src="https://multitool.ninja/favicon.ico?v&#x3D;2" alt="favicon" class="not-responsive overflow-hiddden" style="max-width: 21px; max-height: 21px;" onerror="this.remove()"/>

















<p class="d-inline-block text-truncate mb-0">Multitool.Org Forum <span class="text-secondary">(multitool.ninja)</span></p>
</a>
</div></p>
<p dir="auto">My micra sockets are perfect , but I only have 1 good large one , I need to make some more &amp; I will try something a bit different this time.</p>
</blockquote>
<p dir="auto">cheers mat ill browse through those after my night shift dam i wish i had a good internet phone  :rofl:  :D</p>
]]></description><link>https://multitool.ninja/post/343255</link><guid isPermaLink="true">https://multitool.ninja/post/343255</guid><dc:creator><![CDATA[Zed]]></dc:creator><pubDate>Fri, 12 Mar 2010 18:56:42 GMT</pubDate></item><item><title><![CDATA[Reply to Leatherman Disassembly Tool on Fri, 12 Mar 2010 18:53:54 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/neil" aria-label="Profile: Neil">@<bdi>Neil</bdi></a> <a href="/post/343025">said</a>:<br />
Good try Mat <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" />  I think the problem is that ideally you want your material to be at least as hard as the nut you want to turn.  Got any molten steel handy :P</p>
</blockquote>
<p dir="auto">Hmm, I wonder if the is any chemically hardening substance that hard?  <img src="/assets/uploads/smileys/thinking.gif" alt=":think:" title="Thinking" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/343253</link><guid isPermaLink="true">https://multitool.ninja/post/343253</guid><dc:creator><![CDATA[Magnus]]></dc:creator><pubDate>Fri, 12 Mar 2010 18:53:54 GMT</pubDate></item><item><title><![CDATA[Reply to Leatherman Disassembly Tool on Fri, 12 Mar 2010 14:20:42 GMT]]></title><description><![CDATA[<p dir="auto">Mr. Crunch too the rescue Ponch  <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" />, the Crunch is just holding the fastener &amp; the socket is doing the work,so risk of shagging the fastener is a lot less  :D :D.<br />
I hope I can make a  couple good ones this weekend :D :D</p>
]]></description><link>https://multitool.ninja/post/343050</link><guid isPermaLink="true">https://multitool.ninja/post/343050</guid><dc:creator><![CDATA[MultiMat]]></dc:creator><pubDate>Fri, 12 Mar 2010 14:20:42 GMT</pubDate></item><item><title><![CDATA[Reply to Leatherman Disassembly Tool on Fri, 12 Mar 2010 14:12:24 GMT]]></title><description><![CDATA[<p dir="auto">If You have 1 good large 1 MM then wouldn't a Kick clip make for the other side :) I understand that you are more just wanting a setup to take apart but that might fill the gap until you can come up with another 1 <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/343045</link><guid isPermaLink="true">https://multitool.ninja/post/343045</guid><dc:creator><![CDATA[Poncho65]]></dc:creator><pubDate>Fri, 12 Mar 2010 14:12:24 GMT</pubDate></item><item><title><![CDATA[Reply to Leatherman Disassembly Tool on Fri, 12 Mar 2010 13:56:04 GMT]]></title><description><![CDATA[<p dir="auto">Good try Mat <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" />  I think the problem is that ideally you want your material to be at least as hard as the nut you want to turn.  Got any molten steel handy :P</p>
]]></description><link>https://multitool.ninja/post/343025</link><guid isPermaLink="true">https://multitool.ninja/post/343025</guid><dc:creator><![CDATA[Neil]]></dc:creator><pubDate>Fri, 12 Mar 2010 13:56:04 GMT</pubDate></item><item><title><![CDATA[Reply to Leatherman Disassembly Tool on Fri, 12 Mar 2010 05:45:30 GMT]]></title><description><![CDATA[<p dir="auto">Paul here are some other options mate</p>
<p dir="auto"><div class="card col-md-9 col-lg-6 position-relative link-preview p-0">



<a href="https://multitool.ninja/topic/4655/another-hack-for-the-leatherman-knurled-screws/1?lang&#x3D;en-GB" title="Another hack for the Leatherman knurled screws.">
<img src="https://multitool.ninja/assets/uploads/category/116-mod-squad.png" class="card-img-top not-responsive" style="max-height: 15rem;" alt="Link Preview Image" onerror="this.parentElement.remove()" />
</a>







<div class="card-body">
<h5 class="card-title">
<a class="text-decoration-none" href="https://multitool.ninja/topic/4655/another-hack-for-the-leatherman-knurled-screws/1?lang&#x3D;en-GB">
Another hack for the Leatherman knurled screws.
</a>
</h5>
<p class="card-text line-clamp-3">Once again boredom serves as the motivation for innovation. I was washing my EDC Kick for a comparative rust review when I was struck by this idea. I don&#x27;t t...</p>
</div>
<a href="https://multitool.ninja/topic/4655/another-hack-for-the-leatherman-knurled-screws/1?lang&#x3D;en-GB" class="card-footer text-body-secondary small d-flex gap-2 align-items-center lh-2">



<img src="https://multitool.ninja/favicon.ico?v&#x3D;2" alt="favicon" class="not-responsive overflow-hiddden" style="max-width: 21px; max-height: 21px;" onerror="this.remove()"/>

















<p class="d-inline-block text-truncate mb-0">Multitool.Org Forum <span class="text-secondary">(multitool.ninja)</span></p>
</a>
</div></p>
<p dir="auto"><div class="card col-md-9 col-lg-6 position-relative link-preview p-0">



<a href="https://multitool.ninja/topic/7167/dismantling-leatherman-toolswinning-the-war-on-knurled-knobs/1?lang&#x3D;en-GB" title="Dismantling Leatherman Tools(Winning The War on Knurled Knobs)">
<img src="https://multitool.ninja/assets/uploads/category/116-mod-squad.png" class="card-img-top not-responsive" style="max-height: 15rem;" alt="Link Preview Image" onerror="this.parentElement.remove()" />
</a>







<div class="card-body">
<h5 class="card-title">
<a class="text-decoration-none" href="https://multitool.ninja/topic/7167/dismantling-leatherman-toolswinning-the-war-on-knurled-knobs/1?lang&#x3D;en-GB">
Dismantling Leatherman Tools(Winning The War on Knurled Knobs)
</a>
</h5>
<p class="card-text line-clamp-3">Seeing Kwakster&#x27;s specialized tools got me thinking  . Sponny&#x27;s (spoonrobot) excellent post/topic/4655 and Goldy(Goldmeister) terrific ideas in the same post...</p>
</div>
<a href="https://multitool.ninja/topic/7167/dismantling-leatherman-toolswinning-the-war-on-knurled-knobs/1?lang&#x3D;en-GB" class="card-footer text-body-secondary small d-flex gap-2 align-items-center lh-2">



<img src="https://multitool.ninja/favicon.ico?v&#x3D;2" alt="favicon" class="not-responsive overflow-hiddden" style="max-width: 21px; max-height: 21px;" onerror="this.remove()"/>

















<p class="d-inline-block text-truncate mb-0">Multitool.Org Forum <span class="text-secondary">(multitool.ninja)</span></p>
</a>
</div></p>
<p dir="auto">My micra sockets are perfect , but I only have 1 good large one , I need to make some more &amp; I will try something a bit different this time.</p>
]]></description><link>https://multitool.ninja/post/342896</link><guid isPermaLink="true">https://multitool.ninja/post/342896</guid><dc:creator><![CDATA[MultiMat]]></dc:creator><pubDate>Fri, 12 Mar 2010 05:45:30 GMT</pubDate></item><item><title><![CDATA[Reply to Leatherman Disassembly Tool on Fri, 12 Mar 2010 05:37:22 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/multimat" aria-label="Profile: MultiMat">@<bdi>MultiMat</bdi></a> <a href="/post/342891">said</a>:<br />
Paul I can give you some tips as the JB Putty wants to blow out both ends of the socket , but the real problem is the fine shallow pattern of the knurled fastener is too much for the putty , with the pattern only lasting 1 or 2 turns before the fastener slips &amp; shreds/strips the pattern out, rendering it knackered  :( :( :(</p>
</blockquote>
<p dir="auto">thanks mat, i do wish there was a tool available but i guess LM dont really wont people taking there tools apart, there must be a market for these for modders  <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /> its a shame you couldnt use those for molds, then cast them, i suppose steel would be the best bet, i did try and cut slots into a hole on a piece of steel, it kind of worked but i only had one  :-\</p>
]]></description><link>https://multitool.ninja/post/342893</link><guid isPermaLink="true">https://multitool.ninja/post/342893</guid><dc:creator><![CDATA[Zed]]></dc:creator><pubDate>Fri, 12 Mar 2010 05:37:22 GMT</pubDate></item><item><title><![CDATA[Reply to Leatherman Disassembly Tool on Fri, 12 Mar 2010 05:32:56 GMT]]></title><description><![CDATA[<p dir="auto">Paul I can give you some tips as the JB Putty wants to blow out both ends of the socket , but the real problem is the fine shallow pattern of the knurled fastener is too much for the putty , with the pattern only lasting 1 or 2 turns before the fastener slips &amp; shreds/strips the pattern out, rendering it knackered  :( :( :(</p>
]]></description><link>https://multitool.ninja/post/342891</link><guid isPermaLink="true">https://multitool.ninja/post/342891</guid><dc:creator><![CDATA[MultiMat]]></dc:creator><pubDate>Fri, 12 Mar 2010 05:32:56 GMT</pubDate></item><item><title><![CDATA[Reply to Leatherman Disassembly Tool on Fri, 12 Mar 2010 04:52:49 GMT]]></title><description><![CDATA[<p dir="auto">I was thinking of doing this myself, ive used J-B weld alot in the past and generally its amazing stuff, but as said i dont think it will have great torque pressure , with lock tight on the screws it might do them up ok ,it will be loosening them again were the problems might start, i look forward to seeing how they do then i might knock a few up myslef  <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
<p dir="auto">paul</p>
]]></description><link>https://multitool.ninja/post/342873</link><guid isPermaLink="true">https://multitool.ninja/post/342873</guid><dc:creator><![CDATA[Zed]]></dc:creator><pubDate>Fri, 12 Mar 2010 04:52:49 GMT</pubDate></item><item><title><![CDATA[Reply to Leatherman Disassembly Tool on Fri, 12 Mar 2010 03:42:43 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/j-sews" aria-label="Profile: J-sews">@<bdi>J-sews</bdi></a> <a href="/post/342837">said</a>:<br />
I can't think of any good substance that would work Mat. :( Why didn't plain sockets work like the ones in your second to last photo? ??? Would those work better if you ground the face of the socket back aways, eliminating the bevel at the lead edge of the socket? It looks like that bevel takes away from about half the thickness of the fastener, which reduces the engagement quite a bit. :-\</p>
<p dir="auto">Although the socket in the back row center looks to have full engagement. Did it not work well Mat?</p>
</blockquote>
<p dir="auto">Bob the smaller ones work perfectly on Micras , but I only have one that works well on larger fasteners  :( :(. I was thinking if I could some how partially/completely plug the socket it would assist in getting a nice even imprint &amp; also act too grip the top of the fastener in use(a better fit/grip=better tool). My brute force press with the vise does not seem to evenly imprint onto the socket. I have tried filling down the socket to try &amp; assist the process with not much improvement.<br />
What I think might make a difference is using a fastener removed from the tool, in a bit of wood with some washers under it , in the vise &amp; see if I can get a better quality copy, as opposed to pressing the socket onto the fastener whilst it is in the MT <img src="/assets/uploads/smileys/thinking.gif" alt=":think:" title="Thinking" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/thinking.gif" alt=":think:" title="Thinking" class="forum-smiley emoji" />. A plugged socket would get the best imprint I think  <img src="/assets/uploads/smileys/thinking.gif" alt=":think:" title="Thinking" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/thinking.gif" alt=":think:" title="Thinking" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/342848</link><guid isPermaLink="true">https://multitool.ninja/post/342848</guid><dc:creator><![CDATA[MultiMat]]></dc:creator><pubDate>Fri, 12 Mar 2010 03:42:43 GMT</pubDate></item><item><title><![CDATA[Reply to Leatherman Disassembly Tool on Fri, 12 Mar 2010 03:22:34 GMT]]></title><description><![CDATA[<p dir="auto">I can't think of any good substance that would work Mat. :( Why didn't plain sockets work like the ones in your second to last photo? ??? Would those work better if you ground the face of the socket back aways, eliminating the bevel at the lead edge of the socket? It looks like that bevel takes away from about half the thickness of the fastener, which reduces the engagement quite a bit. :-\</p>
<p dir="auto">Although the socket in the back row center looks to have full engagement. Did it not work well Mat?</p>
]]></description><link>https://multitool.ninja/post/342837</link><guid isPermaLink="true">https://multitool.ninja/post/342837</guid><dc:creator><![CDATA[J-sews]]></dc:creator><pubDate>Fri, 12 Mar 2010 03:22:34 GMT</pubDate></item><item><title><![CDATA[Reply to Leatherman Disassembly Tool on Fri, 12 Mar 2010 01:54:53 GMT]]></title><description><![CDATA[<p dir="auto">JB Weld does not resist torque very well.  It is pretty good with shearing forces, but add a rotational component and it seems to let go pretty easily.</p>
<p dir="auto">IME.</p>
]]></description><link>https://multitool.ninja/post/342802</link><guid isPermaLink="true">https://multitool.ninja/post/342802</guid><dc:creator><![CDATA[Mr. Whippy]]></dc:creator><pubDate>Fri, 12 Mar 2010 01:54:53 GMT</pubDate></item></channel></rss>