<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0"><channel><title><![CDATA[Buck Navigator]]></title><description><![CDATA[<p dir="auto">Like many folks, the first time I saw it was five years ago in the 2002 Cabelas Outdoors catalog. I always flip to the cutlery section first, then slow down, scanning through the knives as I begin to home in on the multitool section. In those days before I was internet addicted, the Cabelas catalog was the best indication of new gear for the upcoming season. What would be the hot item this year?</p>
<p dir="auto">There, down at the bottom of the page, beneath the Leathermans and the Gerbers, was a most unusual looking device. A multitool? With a carabiner?</p>
<p dir="auto">Sure enough, it was the Buck Navigator, and it looked like no other multitool has before or since.</p>
<p dir="auto"><img src="http://img.photobucket.com/albums/v307/jooliesews/Bobbys/bn0.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">At first glance, the Navigator catches your attention with its unusual lines and bright colors. Half a decade ago, the Leatherman Juice series was still only a year old, so multitools with color anodized aluminum scales were still fresh and exciting. The ones pictured in Cabelas fired my imagination and whet my desire. Despite the steep $55.00 list price, I was immediately on the phone, credit card in hand.</p>
<p dir="auto">“Our apologies, this item is not yet in stock,” came the sales clerk’s voice, “Please try again in 4 to 6 weeks.” Bummer.  :(</p>
<p dir="auto">As near as I can determine, Cabelas never received a single tool from Buck. Nor did any of the literally <em>dozens</em> of internet sites that featured the Navigator for sale. Pictures were shown, features were listed, and color options were offered, but nobody ever stated that the new tool was actually “in stock.” Two years after the initial <a href="http://www.equipped.org/shot_show_2002.htm" rel="nofollow ugc">SHOT SHOW</a> introduction, retail sites in North America and Europe continued to advertise the Navigator as “Coming Soon!” It never happened. Cabelas listed it in a second edition catalog, then gave up. Eventually, so did everyone else.</p>
<p dir="auto">So what the heck happened? Despite numerous inquiries, company reps from Buck Knives never would tell. But after obtaining a few pre-production samples, I think I’ve got a pretty good idea:</p>
<p dir="auto">My theory is that the whole Navigator fiasco was somewhat of an embarrassment for Buck. I don't know the whole story of course, but it seems that Buck was not going to manufacture the tool themselves, at their American facility. Instead they sent the project overseas. When pre-production prototypes were not up to Buck’s hard-earned reputation for quality, they were unwilling or unable to improve. Unknown how long they struggled at it before finally dumping the whole project.</p>
<p dir="auto">What seems so mind-boggling to me is how far along things progressed before they pulled the plug! I mean, the Navigator was listed for sale on dozens of web sites and was advertised in several big-name sporting catalogs. Wholesale orders would have been placed, photo spreads taken, and spec sheets distributed. I don’t imagine it would be cheap (or good for Buck’s reputation with their distributors) to cancel a product so late in the game. But they did. Amazing.</p>
<p dir="auto"><img src="http://img.photobucket.com/albums/v307/jooliesews/Bobbys/bn1.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">So about this Navigator anyhow:<br />
Right from the start it was to be produced in three different colors, black, blue, and purple. The handle scales are anodized plates of aluminum, attached to the frame by a number of rivets. The frame itself, as well as the plier jaws, are of a laminated construction. Individual plates are stamped out on a press, then the whole sandwich is stacked up and riveted together. (The same process was used to produce the plier jaws on the Schrade Tough Tool a few years ago.)  Individual plates can be seen in the edge-view pictured below.</p>
<p dir="auto"><img src="http://img.photobucket.com/albums/v307/jooliesews/Bobbys/bn2.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">One handle is completely occupied by a carabiner with a single piece spring-steel gate. (Personally, I’m not convinced that a carabiner feature is worth giving up four other blades and drivers for, but maybe that’s just me.) The 10mm gate opening is adequate, the spring action is strong and operates flawlessly.</p>
<p dir="auto"><img src="http://img.photobucket.com/albums/v307/jooliesews/Bobbys/bn3.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">The opposite handle is equipped with a combination plain edge/serrated edge knife blade, a file, a medium screwdriver, and a cap lifter/can opener. All four of these blades are conveniently outside-opening. (Accessible without opening up the handles and pliers.)</p>
<p dir="auto">The knife is about 2-1/2 inches (63mm) long, and can be flipped open by right handers via a thumb stud. Once open, it stays that way until released using a standard liner lock spring in the handle.</p>
<p dir="auto">Operation of the knife blades on all three of my Navigators are excessively crude and sloppy, no doubt because these are early prototype examples.</p>
<p dir="auto"><img src="http://img.photobucket.com/albums/v307/jooliesews/Bobbys/bn4.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Next to the knife are a couple of short stubby devices, somewhat resembling a screwdriver and a can opener. Neither look to be up to their intended tasks. Again, one can only assume that if production of the Navigator had moved forward, these blades would have been improved and refined.</p>
<p dir="auto">The other “long” tool is a two-sided file, with course teeth on one side and fine on the other.</p>
<p dir="auto">(Note no Phillips screwdriver, no scissors, and no saw. This is the price to be paid for having a full sized carabiner occupying one entire handle.)</p>
<p dir="auto"><img src="http://img.photobucket.com/albums/v307/jooliesews/Bobbys/bn5.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">The ergonomics on the Navigator are…….bad. Really bad. When using the pliers, holding the tool in your hand one way results in the asymmetrical handle digging into your palm. Flip the tool over, and the asymmetric part pushes against your pinky finger, forcing the rest of your hand to ride up on the plier jaws. Not impressive.</p>
<p dir="auto">An even worse experience is trying to fold the tool away when you are through using it. The fiddle frustration factor is enormous, and I’ve never managed to accomplish the fold-up cleanly on the first try. Or the second.</p>
<p dir="auto"><img src="http://img.photobucket.com/albums/v307/jooliesews/Bobbys/bn6.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Given all the issues Buck was facing with the Navigator, I suppose they looked at their cards and decided to fold. Personally, I think the problems were all solvable. Perhaps the communication gap between Asia and North America was just too great to overcome five years ago. I dunno. As it is, the Navigator is a rare and exclusive item, probably only valuable to collectors. I wouldn’t trade mine for anything, but I know of one member who would…… ;)</p>
<p dir="auto">Bob</p>
]]></description><link>https://multitool.ninja/topic/1921/buck-navigator</link><generator>RSS for Node</generator><lastBuildDate>Mon, 16 Nov 2026 16:45:29 GMT</lastBuildDate><atom:link href="https://multitool.ninja/topic/1921.rss" rel="self" type="application/rss+xml"/><pubDate>Sat, 28 Jul 2007 19:56:23 GMT</pubDate><ttl>60</ttl><item><title><![CDATA[Reply to Buck Navigator on Sat, 08 Feb 2020 15:16:52 GMT]]></title><description><![CDATA[<p dir="auto">Awesome that you have restored the pics,  hiraboo <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/like-sign.gif" alt=":like:" title="I like this" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/2085167</link><guid isPermaLink="true">https://multitool.ninja/post/2085167</guid><dc:creator><![CDATA[Poncho65]]></dc:creator><pubDate>Sat, 08 Feb 2020 15:16:52 GMT</pubDate></item><item><title><![CDATA[Reply to Buck Navigator on Sat, 08 Feb 2020 14:25:36 GMT]]></title><description><![CDATA[<p dir="auto"><img src="/assets/uploads/smileys/like-sign.gif" alt=":like:" title="I like this" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/2085125</link><guid isPermaLink="true">https://multitool.ninja/post/2085125</guid><dc:creator><![CDATA[SteveC]]></dc:creator><pubDate>Sat, 08 Feb 2020 14:25:36 GMT</pubDate></item><item><title><![CDATA[Reply to Buck Navigator on Sat, 08 Feb 2020 14:04:40 GMT]]></title><description><![CDATA[<p dir="auto">**&gt; ALL</p>
<p dir="auto">This post is <em>not mine originally, but J-sew’s post.</em><br />
Due to some issues around <a href="http://photobucket.com" rel="nofollow ugc">photobucket.com</a>, you can hardly see many important photos posted by J-sew.<br />
So I will back up his photos and restore some of his posts.</p>
<p dir="auto">[b]Original posted by J-sews;**<br />
<a href="/post/21687">Buck Navigator</a></p>
<hr />
<p dir="auto">Like many folks, the first time I saw it was five years ago in the 2002 Cabelas Outdoors catalog. I always flip to the cutlery section first, then slow down, scanning through the knives as I begin to home in on the multitool section. In those days before I was internet addicted, the Cabelas catalog was the best indication of new gear for the upcoming season. What would be the hot item this year?</p>
<p dir="auto">There, down at the bottom of the page, beneath the Leathermans and the Gerbers, was a most unusual looking device. A multitool? With a carabiner?</p>
<p dir="auto">Sure enough, it was the Buck Navigator, and it looked like no other multitool has before or since.</p>
<p dir="auto"><img src="https://lh3.googleusercontent.com/PfM77dk-DgIeOj_kBjz-wiaF1NCA1UOTnNvdD9vfnXsuhSFIbRyI1zSLn_BFY0L4hl1bD5rbP7QncwzxcdNzXpFaHZfB-afBuNTNGRsIIrrRa4IGtRGKyGOz8UyDb9WSXvg_Iz-apg=w347-h360-no?.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">At first glance, the Navigator catches your attention with its unusual lines and bright colors. Half a decade ago, the Leatherman Juice series was still only a year old, so multitools with color anodized aluminum scales were still fresh and exciting. The ones pictured in Cabelas fired my imagination and whet my desire. Despite the steep $55.00 list price, I was immediately on the phone, credit card in hand.</p>
<p dir="auto">“Our apologies, this item is not yet in stock,” came the sales clerk’s voice, “Please try again in 4 to 6 weeks.” Bummer.  :(</p>
<p dir="auto">As near as I can determine, Cabelas never received a single tool from Buck. Nor did any of the literally <em>dozens</em> of internet sites that featured the Navigator for sale. Pictures were shown, features were listed, and color options were offered, but nobody ever stated that the new tool was actually “in stock.” Two years after the initial <a href="http://www.equipped.org/shot_show_2002.htm" rel="nofollow ugc">SHOT SHOW</a> introduction, retail sites in North America and Europe continued to advertise the Navigator as “Coming Soon!” It never happened. Cabelas listed it in a second edition catalog, then gave up. Eventually, so did everyone else.</p>
<p dir="auto">So what the heck happened? Despite numerous inquiries, company reps from Buck Knives never would tell. But after obtaining a few pre-production samples, I think I’ve got a pretty good idea:</p>
<p dir="auto">My theory is that the whole Navigator fiasco was somewhat of an embarrassment for Buck. I don't know the whole story of course, but it seems that Buck was not going to manufacture the tool themselves, at their American facility. Instead they sent the project overseas. When pre-production prototypes were not up to Buck’s hard-earned reputation for quality, they were unwilling or unable to improve. Unknown how long they struggled at it before finally dumping the whole project.</p>
<p dir="auto">What seems so mind-boggling to me is how far along things progressed before they pulled the plug! I mean, the Navigator was listed for sale on dozens of web sites and was advertised in several big-name sporting catalogs. Wholesale orders would have been placed, photo spreads taken, and spec sheets distributed. I don’t imagine it would be cheap (or good for Buck’s reputation with their distributors) to cancel a product so late in the game. But they did. Amazing.</p>
<p dir="auto"><img src="https://lh3.googleusercontent.com/J7noPJFjJ5PY1LcQJ42uoWL_nJuIhYl6ImdDO-lybMWEK5L1N9eCuA2J49LSHkf-J-Dlvt-j1KD5SrB-iscY2lwYLXZxKhcoJB7IlpbYEke6viyiF12rCU_ybo7anNiujZYxJ5JSfA=w700-h462-no?.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">So about this Navigator anyhow:<br />
Right from the start it was to be produced in three different colors, black, blue, and purple. The handle scales are anodized plates of aluminum, attached to the frame by a number of rivets. The frame itself, as well as the plier jaws, are of a laminated construction. Individual plates are stamped out on a press, then the whole sandwich is stacked up and riveted together. (The same process was used to produce the plier jaws on the Schrade Tough Tool a few years ago.)  Individual plates can be seen in the edge-view pictured below.</p>
<p dir="auto"><img src="https://lh3.googleusercontent.com/l0oFhkk9w3lVKe_HuT40Ke1T2XP7SnGCScJecSmG-UWlfRXi9BXHeO25dhDimGj5byU0L4PiFu6C8B3uEqY-BVCf6GtNLv1I64llMI3bKdng7XNHXNIclnrzAR21SXmM8uIXRTgNpQ=w700-h455-no?.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">One handle is completely occupied by a carabiner with a single piece spring-steel gate. (Personally, I’m not convinced that a carabiner feature is worth giving up four other blades and drivers for, but maybe that’s just me.) The 10mm gate opening is adequate, the spring action is strong and operates flawlessly.</p>
<p dir="auto"><img src="https://lh3.googleusercontent.com/on8WBzYgfKv4KV7QCs63y0GhIQq5vWn6vLb28SkXO0XJ374Pd852nNEx81tsDPJkMfQOXVfsWFbkGOdLsZT5y46TTiAtfAa4_Rkz2aINhhl0O2St6NP7YjzhqtynrqGLN4qX07yM0Q=w700-h459-no?.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">The opposite handle is equipped with a combination plain edge/serrated edge knife blade, a file, a medium screwdriver, and a cap lifter/can opener. All four of these blades are conveniently outside-opening. (Accessible without opening up the handles and pliers.)</p>
<p dir="auto">The knife is about 2-1/2 inches (63mm) long, and can be flipped open by right handers via a thumb stud. Once open, it stays that way until released using a standard liner lock spring in the handle.</p>
<p dir="auto">Operation of the knife blades on all three of my Navigators are excessively crude and sloppy, no doubt because these are early prototype examples.</p>
<p dir="auto"><img src="https://lh3.googleusercontent.com/ETu3JsbgLBBXjOXFdx9LQP3GqDMvVjicKtsN18QEn1I5rwUo80qtwMTeK8xyW6rKBe8OzA8xWmm-dMBt5N-sIVGSba7w_uVS9WLVaklRaAJpJ4VfGgra8B9KhyVS_YEckZSzVn-Sdw=w700-h548-no?.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Next to the knife are a couple of short stubby devices, somewhat resembling a screwdriver and a can opener. Neither look to be up to their intended tasks. Again, one can only assume that if production of the Navigator had moved forward, these blades would have been improved and refined.</p>
<p dir="auto">The other “long” tool is a two-sided file, with course teeth on one side and fine on the other.</p>
<p dir="auto">(Note no Phillips screwdriver, no scissors, and no saw. This is the price to be paid for having a full sized carabiner occupying one entire handle.)</p>
<p dir="auto"><img src="https://lh3.googleusercontent.com/Qokgy64EzXxl_GAEW7Zt44XVlmk2W01OS_eocAYPXlIrGwxnJ4dzeG9wCYyPXDO4B22spkQIc4UiG8CZ-INAuKd_Zo4crUfa9599DM8zgtxqMAJ0qva1m6kjKhgcuQT6a3WeTC1lkw=w700-h567-no?.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">The ergonomics on the Navigator are…….bad. Really bad. When using the pliers, holding the tool in your hand one way results in the asymmetrical handle digging into your palm. Flip the tool over, and the asymmetric part pushes against your pinky finger, forcing the rest of your hand to ride up on the plier jaws. Not impressive.</p>
<p dir="auto">An even worse experience is trying to fold the tool away when you are through using it. The fiddle frustration factor is enormous, and I’ve never managed to accomplish the fold-up cleanly on the first try. Or the second.</p>
<p dir="auto"><img src="https://lh3.googleusercontent.com/OZh5Ds8IqWRD4DYrm0wqHfYjOQIzTW2983-14EDOO_IDpfKz_1KYEoPrwjiSMXuTMf5_h2AZX8hQxQKADkN3JIHR1Nk0VJ8qRoYuVQvY1nZycBOdqUjlys769UChkXMFxT1n93yviw=w700-h549-no?.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Given all the issues Buck was facing with the Navigator, I suppose they looked at their cards and decided to fold. Personally, I think the problems were all solvable. Perhaps the communication gap between Asia and North America was just too great to overcome five years ago. I dunno. As it is, the Navigator is a rare and exclusive item, probably only valuable to collectors. I wouldn’t trade mine for anything, but I know of one member who would…… ;)</p>
<p dir="auto">Bob</p>
]]></description><link>https://multitool.ninja/post/2085116</link><guid isPermaLink="true">https://multitool.ninja/post/2085116</guid><dc:creator><![CDATA[hiraboo]]></dc:creator><pubDate>Sat, 08 Feb 2020 14:04:40 GMT</pubDate></item><item><title><![CDATA[Reply to Buck Navigator on Wed, 06 Feb 2019 20:13:40 GMT]]></title><description><![CDATA[<p dir="auto">:ahhh</p>
]]></description><link>https://multitool.ninja/post/1869339</link><guid isPermaLink="true">https://multitool.ninja/post/1869339</guid><dc:creator><![CDATA[Butch]]></dc:creator><pubDate>Wed, 06 Feb 2019 20:13:40 GMT</pubDate></item><item><title><![CDATA[Reply to Buck Navigator on Wed, 06 Feb 2019 17:28:38 GMT]]></title><description><![CDATA[<p dir="auto">This sort of thing is not at all uncommon in the firearms industry, lots of advertising with little or no production at all. <img src="/assets/uploads/smileys/shrugging.gif" alt=":dunno:" title="I dunno" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1869223</link><guid isPermaLink="true">https://multitool.ninja/post/1869223</guid><dc:creator><![CDATA[Butch]]></dc:creator><pubDate>Wed, 06 Feb 2019 17:28:38 GMT</pubDate></item><item><title><![CDATA[Reply to Buck Navigator on Wed, 06 Feb 2019 15:40:24 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/j-sews" aria-label="Profile: J-sews">@<bdi>J-sews</bdi></a> <a href="/post/69540">said</a>:<br />
Mine are all partially serrated....</p>
</blockquote>
<p dir="auto">All of mine are also partially serrated.</p>
]]></description><link>https://multitool.ninja/post/1869074</link><guid isPermaLink="true">https://multitool.ninja/post/1869074</guid><dc:creator><![CDATA[gregozedobe]]></dc:creator><pubDate>Wed, 06 Feb 2019 15:40:24 GMT</pubDate></item><item><title><![CDATA[Reply to Buck Navigator on Fri, 04 Apr 2008 23:38:03 GMT]]></title><description><![CDATA[<p dir="auto">Mine are all partially serrated....</p>
]]></description><link>https://multitool.ninja/post/69540</link><guid isPermaLink="true">https://multitool.ninja/post/69540</guid><dc:creator><![CDATA[J-sews]]></dc:creator><pubDate>Fri, 04 Apr 2008 23:38:03 GMT</pubDate></item><item><title><![CDATA[Reply to Buck Navigator on Fri, 04 Apr 2008 19:08:31 GMT]]></title><description><![CDATA[<p dir="auto">Hi Doug,</p>
<p dir="auto">Indeed I did and am tickled pink about these.</p>
<p dir="auto">Were there prototypes made with and without partially-serrated blades?</p>
<p dir="auto">Cheers - Joe</p>
]]></description><link>https://multitool.ninja/post/69509</link><guid isPermaLink="true">https://multitool.ninja/post/69509</guid><dc:creator><![CDATA[joebw]]></dc:creator><pubDate>Fri, 04 Apr 2008 19:08:31 GMT</pubDate></item><item><title><![CDATA[Reply to Buck Navigator on Mon, 31 Mar 2008 13:39:44 GMT]]></title><description><![CDATA[<p dir="auto">Yeah, we asked specifically abotu that when talking to Buck's representative, so unless something has changed since then, there will be no Whittaker name or logo on them.</p>
<p dir="auto">Def</p>
]]></description><link>https://multitool.ninja/post/68444</link><guid isPermaLink="true">https://multitool.ninja/post/68444</guid><dc:creator><![CDATA[Grant Lamontagne]]></dc:creator><pubDate>Mon, 31 Mar 2008 13:39:44 GMT</pubDate></item><item><title><![CDATA[Reply to Buck Navigator on Mon, 31 Mar 2008 13:36:15 GMT]]></title><description><![CDATA[<p dir="auto">Hi Doug,</p>
<p dir="auto">The marking on the Navigator prototypes is in line with the other Whittaker Bucks.  The Summit and the X-Tract 730 and 731 all have "Buck Whittaker" without the product name.  I understand from Bob and Def that the X-Tract Fin will only say Buck on the handle.</p>
<p dir="auto">Cheers - Joe</p>
]]></description><link>https://multitool.ninja/post/68442</link><guid isPermaLink="true">https://multitool.ninja/post/68442</guid><dc:creator><![CDATA[joebw]]></dc:creator><pubDate>Mon, 31 Mar 2008 13:36:15 GMT</pubDate></item><item><title><![CDATA[Reply to Buck Navigator on Mon, 31 Mar 2008 12:41:21 GMT]]></title><description><![CDATA[<p dir="auto">I thought the same thing! :D</p>
<p dir="auto"><img src="http://www.azcustomshirts.com/catalog/images/Autobot.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Def</p>
]]></description><link>https://multitool.ninja/post/68432</link><guid isPermaLink="true">https://multitool.ninja/post/68432</guid><dc:creator><![CDATA[Grant Lamontagne]]></dc:creator><pubDate>Mon, 31 Mar 2008 12:41:21 GMT</pubDate></item><item><title><![CDATA[Reply to Buck Navigator on Mon, 31 Mar 2008 12:35:31 GMT]]></title><description><![CDATA[<p dir="auto">bosdef, those buck navigators look like transformer autobots to me. :D</p>
]]></description><link>https://multitool.ninja/post/68430</link><guid isPermaLink="true">https://multitool.ninja/post/68430</guid><dc:creator><![CDATA[Teofilo]]></dc:creator><pubDate>Mon, 31 Mar 2008 12:35:31 GMT</pubDate></item><item><title><![CDATA[Reply to Buck Navigator on Mon, 31 Mar 2008 11:12:09 GMT]]></title><description><![CDATA[<p dir="auto">Good to see you back Doug! :D</p>
<p dir="auto">Def</p>
]]></description><link>https://multitool.ninja/post/68391</link><guid isPermaLink="true">https://multitool.ninja/post/68391</guid><dc:creator><![CDATA[Grant Lamontagne]]></dc:creator><pubDate>Mon, 31 Mar 2008 11:12:09 GMT</pubDate></item><item><title><![CDATA[Reply to Buck Navigator on Sat, 29 Mar 2008 23:50:50 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/big-target" aria-label="Profile: BIG-TARGET">@<bdi>BIG-TARGET</bdi></a> <a href="/post/68135">said</a>:<br />
Looks modern,,,,,,but does it work? <img src="/assets/uploads/smileys/thinking.gif" alt=":think:" title="Thinking" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">Nope. The prototypes are a total piece o' crud.  :(</p>
<p dir="auto">Course, they surely would have improved by the time production started. Never got that far though. Buck pulled the plug on the whole operation. :-\</p>
]]></description><link>https://multitool.ninja/post/68140</link><guid isPermaLink="true">https://multitool.ninja/post/68140</guid><dc:creator><![CDATA[J-sews]]></dc:creator><pubDate>Sat, 29 Mar 2008 23:50:50 GMT</pubDate></item><item><title><![CDATA[Reply to Buck Navigator on Sat, 29 Mar 2008 23:28:36 GMT]]></title><description><![CDATA[<p dir="auto">Looks modern,,,,,,but does it work? <img src="/assets/uploads/smileys/thinking.gif" alt=":think:" title="Thinking" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/68135</link><guid isPermaLink="true">https://multitool.ninja/post/68135</guid><dc:creator><![CDATA[BIG-TARGET]]></dc:creator><pubDate>Sat, 29 Mar 2008 23:28:36 GMT</pubDate></item><item><title><![CDATA[Reply to Buck Navigator on Sat, 29 Mar 2008 16:10:31 GMT]]></title><description><![CDATA[<p dir="auto">Agreed.  :-\</p>
<p dir="auto">That's the price to be paid for laminated-plate constructon, instead of casting the entire jaw as one piece.</p>
]]></description><link>https://multitool.ninja/post/68058</link><guid isPermaLink="true">https://multitool.ninja/post/68058</guid><dc:creator><![CDATA[J-sews]]></dc:creator><pubDate>Sat, 29 Mar 2008 16:10:31 GMT</pubDate></item><item><title><![CDATA[Reply to Buck Navigator on Sat, 29 Mar 2008 15:04:18 GMT]]></title><description><![CDATA[<p dir="auto">How many pins do you need to stick in a tool? Why are there 4 of them in the plierhead? It makes it look horrible.</p>
]]></description><link>https://multitool.ninja/post/68052</link><guid isPermaLink="true">https://multitool.ninja/post/68052</guid><dc:creator><![CDATA[Thargor]]></dc:creator><pubDate>Sat, 29 Mar 2008 15:04:18 GMT</pubDate></item><item><title><![CDATA[Reply to Buck Navigator on Sat, 29 Mar 2008 14:35:53 GMT]]></title><description><![CDATA[<p dir="auto">Hey! I just stumbled across the original patent for this thing:  <a href="http://www.google.com/patents?id=rWoJAAAAEBAJ&amp;printsec=abstract&amp;zoom=4&amp;dq=6470522#PPP1,M1" rel="nofollow ugc">http://www.google.com/patents?id=rWoJAAAAEBAJ&amp;printsec=abstract&amp;zoom=4&amp;dq=6470522#PPP1,M1</a></p>
<p dir="auto">(Been wondering about it for awhile now) :)</p>
]]></description><link>https://multitool.ninja/post/68048</link><guid isPermaLink="true">https://multitool.ninja/post/68048</guid><dc:creator><![CDATA[J-sews]]></dc:creator><pubDate>Sat, 29 Mar 2008 14:35:53 GMT</pubDate></item><item><title><![CDATA[Reply to Buck Navigator on Sat, 28 Jul 2007 22:53:42 GMT]]></title><description><![CDATA[<p dir="auto">Hehe, I wondered if you would catch that!  ;D</p>
]]></description><link>https://multitool.ninja/post/21706</link><guid isPermaLink="true">https://multitool.ninja/post/21706</guid><dc:creator><![CDATA[J-sews]]></dc:creator><pubDate>Sat, 28 Jul 2007 22:53:42 GMT</pubDate></item><item><title><![CDATA[Reply to Buck Navigator on Sat, 28 Jul 2007 22:40:51 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/j-sews" aria-label="Profile: J-sews">@<bdi>J-sews</bdi></a> <a href="/post/21687">said</a>:<br />
<img src="http://img.photobucket.com/albums/v307/jooliesews/Bobbys/bn6.jpg" alt="" class="img-markdown  img-fluid" /></p>
</blockquote>
<p dir="auto">Hahahahaha... nice choice of map for that picture.  That's just about where I live!  My house would be about a half inch off the right side of the pic and about 1 inch up from the bottom :)</p>
]]></description><link>https://multitool.ninja/post/21702</link><guid isPermaLink="true">https://multitool.ninja/post/21702</guid><dc:creator><![CDATA[665ae]]></dc:creator><pubDate>Sat, 28 Jul 2007 22:40:51 GMT</pubDate></item><item><title><![CDATA[Reply to Buck Navigator on Sat, 28 Jul 2007 21:59:05 GMT]]></title><description><![CDATA[<p dir="auto">Nice story J-sews!</p>
<p dir="auto">The Buck Navigator sort of reminds me of the Leatherman Freestyle/Skeletool.  The Leatherman tools will lack the file but I expect the quality of the construction to be better and it'll have a Phillips.</p>
]]></description><link>https://multitool.ninja/post/21697</link><guid isPermaLink="true">https://multitool.ninja/post/21697</guid><dc:creator><![CDATA[supratentorial]]></dc:creator><pubDate>Sat, 28 Jul 2007 21:59:05 GMT</pubDate></item><item><title><![CDATA[Reply to Buck Navigator on Sat, 28 Jul 2007 20:17:37 GMT]]></title><description><![CDATA[<p dir="auto">Great write-up about one of the biggest might have beens yet in multi-tools.May be Buck will find a company that will work with them to work out all the kinks,and the Navigator see the light of day as a production item.I don't see any reason why a company couldn't market two different concepts  in multi-tools.</p>
]]></description><link>https://multitool.ninja/post/21690</link><guid isPermaLink="true">https://multitool.ninja/post/21690</guid><dc:creator><![CDATA[I'm Still Bison]]></dc:creator><pubDate>Sat, 28 Jul 2007 20:17:37 GMT</pubDate></item></channel></rss>