<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0"><channel><title><![CDATA["bits" of a larger project....]]></title><description><![CDATA[<p dir="auto">*Shortly after I started project Skeletool, I ordered the bit kit to expand its usefulness. While there were many bits I could make use of, I also found there were some I would probably never use at all. I do quite a bit of detailed work. I was disappointed that besides the eyeglasses bit, the smallest size for the flat was 3/32" and the smallest for the phillip was #0. Both of which were still too big for my needs. The eyeglasses bit was also too small for some jobs and not compatible with the Skeletool to begin with. I set out to fabricate a set of precision screwdrivers to fit the large bit driver. This was all before I even got a Wave and a Surge with the small bit driver. These bits turned out to be a blessing in disguise as they made the small bit driver obsolete on both tools, so I removed them, leaving me room to install something more useful and practical.....</p>
<p dir="auto">~ evil ~</p>
<p dir="auto">1.0mm, 1.5mm, 2.0mm flat head drivers<br />
#00, #000, #0000 phillip head drivers<br />
<img src="http://i824.photobucket.com/albums/zz166/evil510/050820101696.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i824.photobucket.com/albums/zz166/evil510/050820101698.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">These bits are part of a project to fill both cards of the bit kit with bits I would actually put to use on a regular basis. I will post more of them here when I get a chance.....*</p>
]]></description><link>https://multitool.ninja/topic/19704/bits-of-a-larger-project</link><generator>RSS for Node</generator><lastBuildDate>Mon, 16 Nov 2026 10:22:36 GMT</lastBuildDate><atom:link href="https://multitool.ninja/topic/19704.rss" rel="self" type="application/rss+xml"/><pubDate>Sun, 09 May 2010 09:42:21 GMT</pubDate><ttl>60</ttl><item><title><![CDATA[Reply to "bits" of a larger project.... on Wed, 15 Jun 2016 14:44:32 GMT]]></title><description><![CDATA[<p dir="auto">Wow, another old thread brought back from the past. Things have changed a "bit" over the years. Now, it is only when going on an outing that I will carry the full kit. Typically, I keep only four bits in the <a href="/post/1163581">Quad Bit Card</a> in addition to the set of 3" inch long reach drivers that I made mentioned earlier in this post.....</p>
]]></description><link>https://multitool.ninja/post/1283533</link><guid isPermaLink="true">https://multitool.ninja/post/1283533</guid><dc:creator><![CDATA[evil510]]></dc:creator><pubDate>Wed, 15 Jun 2016 14:44:32 GMT</pubDate></item><item><title><![CDATA[Reply to "bits" of a larger project.... on Wed, 15 Jun 2016 05:44:29 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto">@Xelkos <a href="/post/1282989">said</a>:<br />
Oops! Bumped into yet another saved link.  <img src="/assets/uploads/smileys/angel.gif" alt=":angel:" title="angel" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">Good of you to do so, it reminds me that I really must check up on all the Evil protects from before I joined!</p>
]]></description><link>https://multitool.ninja/post/1283191</link><guid isPermaLink="true">https://multitool.ninja/post/1283191</guid><dc:creator><![CDATA[Fortytwo]]></dc:creator><pubDate>Wed, 15 Jun 2016 05:44:29 GMT</pubDate></item><item><title><![CDATA[Reply to "bits" of a larger project.... on Tue, 14 Jun 2016 21:33:05 GMT]]></title><description><![CDATA[<p dir="auto">Oops! Bumped into yet another saved link.  <img src="/assets/uploads/smileys/angel.gif" alt=":angel:" title="angel" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1282989</link><guid isPermaLink="true">https://multitool.ninja/post/1282989</guid><dc:creator><![CDATA[Outback in Idaho]]></dc:creator><pubDate>Tue, 14 Jun 2016 21:33:05 GMT</pubDate></item><item><title><![CDATA[Reply to "bits" of a larger project.... on Thu, 11 Aug 2011 16:11:37 GMT]]></title><description><![CDATA[<p dir="auto">If bit kits like that were available for purchase, I might even consider carrying a Wave again.  Splendid work Evil  <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/508418</link><guid isPermaLink="true">https://multitool.ninja/post/508418</guid><dc:creator><![CDATA[sawman]]></dc:creator><pubDate>Thu, 11 Aug 2011 16:11:37 GMT</pubDate></item><item><title><![CDATA[Reply to "bits" of a larger project.... on Sun, 07 Aug 2011 17:42:56 GMT]]></title><description><![CDATA[<p dir="auto">*Hey gang, thank you for all of the comments. I must admit, it sure feels nice to come full circle with this project. It all started out with one bit, right around the time I joined MTO. It snowballed from there and I kept creating bits that would be of actual use to me. Pretty cool to look back through the post and view the evolution of the project. I got to use to always coming back to this project when I had time to spare. What ever will I do now?  *.  ;)</p>
]]></description><link>https://multitool.ninja/post/507311</link><guid isPermaLink="true">https://multitool.ninja/post/507311</guid><dc:creator><![CDATA[evil510]]></dc:creator><pubDate>Sun, 07 Aug 2011 17:42:56 GMT</pubDate></item><item><title><![CDATA[Reply to "bits" of a larger project.... on Sun, 07 Aug 2011 09:11:50 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/multimat" aria-label="Profile: MultiMat">@<bdi>MultiMat</bdi></a> <a href="/post/507150">said</a>:<br />
As always Evil one top stuff  8) 8) <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">+1 Very nice Mate  <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/507211</link><guid isPermaLink="true">https://multitool.ninja/post/507211</guid><dc:creator><![CDATA[Sparky415]]></dc:creator><pubDate>Sun, 07 Aug 2011 09:11:50 GMT</pubDate></item><item><title><![CDATA[Reply to "bits" of a larger project.... on Sun, 07 Aug 2011 02:41:41 GMT]]></title><description><![CDATA[<p dir="auto">I wonder how long it will be before we see a genuine Leatherman Bit Kit with a Fire Starter incorporated into it  <img src="/assets/uploads/smileys/thinking.gif" alt=":think:" title="Thinking" class="forum-smiley emoji" /> :D :D :D.</p>
<p dir="auto">As always Evil one top stuff  8) 8) <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/507150</link><guid isPermaLink="true">https://multitool.ninja/post/507150</guid><dc:creator><![CDATA[MultiMat]]></dc:creator><pubDate>Sun, 07 Aug 2011 02:41:41 GMT</pubDate></item><item><title><![CDATA[Reply to "bits" of a larger project.... on Sun, 07 Aug 2011 02:16:39 GMT]]></title><description><![CDATA[<p dir="auto">Great concept, fabulous execution. <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/507139</link><guid isPermaLink="true">https://multitool.ninja/post/507139</guid><dc:creator><![CDATA[J-sews]]></dc:creator><pubDate>Sun, 07 Aug 2011 02:16:39 GMT</pubDate></item><item><title><![CDATA[Reply to "bits" of a larger project.... on Sat, 06 Aug 2011 19:45:44 GMT]]></title><description><![CDATA[<p dir="auto">these are alll awsome great job <img src="/assets/uploads/smileys/drool.gif" alt=":drool:" title="drool" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/507091</link><guid isPermaLink="true">https://multitool.ninja/post/507091</guid><dc:creator><![CDATA[MTlitton]]></dc:creator><pubDate>Sat, 06 Aug 2011 19:45:44 GMT</pubDate></item><item><title><![CDATA[Reply to "bits" of a larger project.... on Sat, 06 Aug 2011 12:05:13 GMT]]></title><description><![CDATA[<p dir="auto">Oooh!</p>
<p dir="auto">Is this an "Order Now" thread?  :D</p>
<p dir="auto">I'll take 2 bit kits with firesteel please.  :)</p>
<p dir="auto">Beautiful execution Evil one.  <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/507002</link><guid isPermaLink="true">https://multitool.ninja/post/507002</guid><dc:creator><![CDATA[Mr. Whippy]]></dc:creator><pubDate>Sat, 06 Aug 2011 12:05:13 GMT</pubDate></item><item><title><![CDATA[Reply to "bits" of a larger project.... on Sat, 06 Aug 2011 11:52:50 GMT]]></title><description><![CDATA[<p dir="auto">Great work as usual Evil..  8) <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /><br />
Let me know when you're ready for mass production..  ;) :D</p>
]]></description><link>https://multitool.ninja/post/506996</link><guid isPermaLink="true">https://multitool.ninja/post/506996</guid><dc:creator><![CDATA[AHB]]></dc:creator><pubDate>Sat, 06 Aug 2011 11:52:50 GMT</pubDate></item><item><title><![CDATA[Reply to "bits" of a larger project.... on Sat, 06 Aug 2011 11:45:35 GMT]]></title><description><![CDATA[<p dir="auto">*Hey gang. Evil here again. Sorry I have been off to a slow start since I have been back. At any rate, this bit project has been continually evolving for me. I have been customizing it to cater to my specific needs. The last additions I presented to you all were my 3" long reach drivers with custom bit card. You can read more about them <a href="/post/422038">here.</a> For the times that I go mountain biking in the middle of nowhere or camping, I use to always pack a fire starter kit, just in case. Call me a bit paranoid or perhaps I have watched way to many survival shows. I like to be prepared. Since then, I have combined all three bit cards and have incorporated a piece of firesteel and a striker. I also added a custom lanyard to easily pull it out of the pocket of my sheath.....</p>
<p dir="auto">~  evil ~*</p>
<ul>
<li></li>
</ul>
<p dir="auto">All three bit cards combined into one. Top handle tabs of original bit cards cut off and reshaped. Custom lanyard ring made to fit in the small holes that originally held the standard micro screwdriver bit.....*<br />
<img src="http://i824.photobucket.com/albums/zz166/evil510/Multitools/2011-06-24140801.jpg" alt="" class="img-markdown  img-fluid" /></p>
<ul>
<li></li>
</ul>
<p dir="auto">Custom turned lanyard pull and bead fabricated to compliment each other.....*<br />
<img src="http://i824.photobucket.com/albums/zz166/evil510/Multitools/2011-06-24140853.jpg" alt="" class="img-markdown  img-fluid" /></p>
<ul>
<li></li>
</ul>
<p dir="auto">Lanyard installed on ring. Long reach bits installed.....*<br />
<img src="http://i824.photobucket.com/albums/zz166/evil510/Multitools/C360_2011-06-2414-18-23_org.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><em>As viewed from the other side.....</em><br />
<img src="http://i824.photobucket.com/albums/zz166/evil510/Multitools/C360_2011-06-2414-16-59_org.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><em>Bottom edges of bit cards removed. Firesteel and striker installed. Striker partially deployed in next few pictures to show the nail nick.....</em><br />
<img src="http://i824.photobucket.com/albums/zz166/evil510/Multitools/C360_2011-06-2414-16-15_org.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><em>Yet another view.....</em><br />
<img src="http://i824.photobucket.com/albums/zz166/evil510/Multitools/2011-06-24140705.jpg" alt="" class="img-markdown  img-fluid" /></p>
<ul>
<li></li>
</ul>
<p dir="auto">Having cut off all of the excess plastic from both the top and bottom of the standard bit cards, after the addition of all of these modifications, the original length was kept intact. This particular project finally feels like it has come full circle. Now, on to another project  ;)*<br />
<img src="http://i824.photobucket.com/albums/zz166/evil510/Multitools/2011-06-24141220.jpg" alt="" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/506994</link><guid isPermaLink="true">https://multitool.ninja/post/506994</guid><dc:creator><![CDATA[evil510]]></dc:creator><pubDate>Sat, 06 Aug 2011 11:45:35 GMT</pubDate></item><item><title><![CDATA[Reply to "bits" of a larger project.... on Sun, 19 Sep 2010 00:47:06 GMT]]></title><description><![CDATA[<p dir="auto">Been awhile since I checked in on this thread. Belated kudos on your wire stripper bit and glass cutter bit Evil <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /> They both are fabulous ideas! <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/421811</link><guid isPermaLink="true">https://multitool.ninja/post/421811</guid><dc:creator><![CDATA[J-sews]]></dc:creator><pubDate>Sun, 19 Sep 2010 00:47:06 GMT</pubDate></item><item><title><![CDATA[Reply to "bits" of a larger project.... on Sat, 18 Sep 2010 02:19:36 GMT]]></title><description><![CDATA[<p dir="auto">Ever thought of an L or Y Backscratcher bit, with wire bail retainer? Sometimes the can opener end is a bit pointy, and the saw is a bit rough on the skin.</p>
]]></description><link>https://multitool.ninja/post/421544</link><guid isPermaLink="true">https://multitool.ninja/post/421544</guid><dc:creator><![CDATA[Outback in Idaho]]></dc:creator><pubDate>Sat, 18 Sep 2010 02:19:36 GMT</pubDate></item><item><title><![CDATA[Reply to "bits" of a larger project.... on Sat, 18 Sep 2010 02:03:23 GMT]]></title><description><![CDATA[<p dir="auto">Or make a new Multitool Mod thread, but this one would be the Evil specific one. And post all your evily goodness! &gt;:D</p>
]]></description><link>https://multitool.ninja/post/421538</link><guid isPermaLink="true">https://multitool.ninja/post/421538</guid><dc:creator><![CDATA[Shane769]]></dc:creator><pubDate>Sat, 18 Sep 2010 02:03:23 GMT</pubDate></item><item><title><![CDATA[Reply to "bits" of a larger project.... on Fri, 17 Sep 2010 20:48:57 GMT]]></title><description><![CDATA[<p dir="auto">You do such awesome work evil510 you really should do more to show it off. Create a website to collect all projects in one place so they're not only spread across the forum, slowly falling victim to the old thread syndrome.</p>
]]></description><link>https://multitool.ninja/post/421436</link><guid isPermaLink="true">https://multitool.ninja/post/421436</guid><dc:creator><![CDATA[Andreas]]></dc:creator><pubDate>Fri, 17 Sep 2010 20:48:57 GMT</pubDate></item><item><title><![CDATA[Reply to "bits" of a larger project.... on Fri, 17 Sep 2010 13:34:58 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto">@Xelkos <a href="/post/421188">said</a>:<br />
Oh, it was just something mentioned over at Leatherman USA on how great you are with making bits, and thought I'd throw it at you over here before I forgot.</p>
<p dir="auto">MUT has two important things that I am unable to fix my Surge, as I lack the tools &amp; workplace for one, and the skill to change it.</p>
</blockquote>
<blockquote>
<ul>
<li>Pliers: The ST300 like head without sacrificing other functions</li>
</ul>
</blockquote>
<blockquote>
<ul>
<li>Handle lock: Although this might not be a big deal, it's got my curiosity</li>
</ul>
</blockquote>
<blockquote></blockquote>
<blockquote>
<p dir="auto">The removable blade scraper automatically tells me that's prime Awl/Scissors area. But not seeing how bulky it is or isn't I can't say - never held one.</p>
<p dir="auto">BTW, if anybody is into star gazing, the moon and Jupiter are supposed to be the two brightest objects in the sky this Saturday! <a href="http://science.nasa.gov/science-news/science-at-nasa/2010/15sep_jupiter/" rel="nofollow ugc">Closest Encounter with Jupiter until 2022 </a></p>
<p dir="auto">Now to get ready for this interview/meeting.</p>
</blockquote>
<p dir="auto">*Hey Xelkos and thanks! You have me curious. If I am mentioned elsewhere could you please send me a link? Making a Leatherman style bit specifically for that application is not out of the realm of possibility. Let me rephrase. I see it as very doable but is low on the priority list at the moment. If someone approached me about fabricating one, that could change. Perhaps it is something that I will give a deeper look into once my workload lightens up.....</p>
<p dir="auto">The only things I had to sacrifice to do the swap were the spring locks to keep the knives in the closed position when pliers are deployed, clearance issues and getting just the right amount of side pressure via shims so everything would work just right. I never once had an issue with my knives opening while using the pliers on my Wave or my Surge so I didn't even view it as a sacrifice. I did have to go back a second time and re-work some clearance issues when I decided to add long, dedicated drivers to the mix. The flat drivers more or less go right in, they just need to be placed in the right spots with minor tweaking. The phillip driver is not a direct swap even if you keep the Surge plier head you will have clearance issues and the handles will not close. This also applies to he long phillip driver I added into my post 2004 Wave. Not a direct swap. The same clearance issues had to be dealt with. I suppose that is why it really hasn't been done. I have often been asked what I have inside of my Wave and Surge since removing the can opener, small bit driver, etc. from both. Thinking about it now, perhaps I should also post them as a mod.....</p>
<p dir="auto">Something related to your unrelated part of the post... If you or anyone has an Android phone, get the Google Sky Map app. Pretty dang cool if you like to stargaze. Point it anywhere in the sky and it shows you the stars you are looking at even if you can't see them. Shows you all the constellations and you can do a search and it will pinpoint guide you which way to aim in the sky to what you are looking for. Thanks for the heads up. Maybe I will drive out to the boonies to try and have a look.....*</p>
]]></description><link>https://multitool.ninja/post/421232</link><guid isPermaLink="true">https://multitool.ninja/post/421232</guid><dc:creator><![CDATA[evil510]]></dc:creator><pubDate>Fri, 17 Sep 2010 13:34:58 GMT</pubDate></item><item><title><![CDATA[Reply to "bits" of a larger project.... on Fri, 17 Sep 2010 11:30:04 GMT]]></title><description><![CDATA[<p dir="auto">Oh, it was just something mentioned over at Leatherman USA on how great you are with making bits, and thought I'd throw it at you over here before I forgot.</p>
<p dir="auto">MUT has two important things that I am unable to fix my Surge, as I lack the tools &amp; workplace for one, and the skill to change it.</p>
<ul>
<li>
<p dir="auto">Pliers: The ST300 like head without sacrificing other functions</p>
</li>
<li>
<p dir="auto">Handle lock: Although this might not be a big deal, it's got my curiosity</p>
</li>
</ul>
<p dir="auto">The removable blade scraper automatically tells me that's prime Awl/Scissors area. But not seeing how bulky it is or isn't I can't say - never held one. Price? Can't touch it. Done buried myself with two used and one new KF4. I would much rather buy/own a <img src="http://sargentwelch.com/images/200/WL3745GWebF.jpg" alt="" class="img-markdown  img-fluid" /> than a MUT.</p>
<p dir="auto">BTW, if anybody is into star gazing, the moon and Jupiter are supposed to be the two brightest objects in the sky this Saturday! <a href="http://science.nasa.gov/science-news/science-at-nasa/2010/15sep_jupiter/" rel="nofollow ugc">Closest Encounter with Jupiter until 2022 </a></p>
<p dir="auto">Now to get ready for this interview/meeting.</p>
<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/evil510" aria-label="Profile: evil510">@<bdi>evil510</bdi></a> <a href="/post/421113">said</a>:<br />
<em>Believe me, I do have a fondness for Leatherman tools despite their shortcomings. While I do not own any of those weapons, I can tell you without a doubt, of any current multitools out there, if I wanted a weapon specific tool I would choose a Multitasker above any Gerber or Leatherman. I have the full second generation of the Multitasker line-up. From a perfectionist that pays attention to detail, I can tell you that the craftsmanship and build quality of these tools put Gerber and Leatherman to shame, seriously. But then again, that is just my opinion. I have been overdue posting my insights/opinions on them but will do so soon. The MUT will no doubt suit a specific niche. I have yet to handle one. I am not overly excited about them and will wait a while. I will probably get one at some point, but unless I came across a killer deal on one, traded work for one or I am bought one, etc... I won't be getting one anytime soon. Too rich for my blood. Don't get me wrong, I see tons of modding potential with the MUT. But at this point in time, for me it is more hype than anything. With my highly modified Surge, I don't see much I could do with a MUT task-wise that I couldn't do as well, if not better with my Surge. By the way, the sides of the ST300 plier head on my Surge work well as makeshift hammers. I am actually making sacrificial hammer faces for them. As for the longer MUT drivers? Not to worry. Evil's new bits do everything those can do... and some things they can't. I'll be posting them soon.....  ;)</em></p>
</blockquote>
]]></description><link>https://multitool.ninja/post/421188</link><guid isPermaLink="true">https://multitool.ninja/post/421188</guid><dc:creator><![CDATA[Outback in Idaho]]></dc:creator><pubDate>Fri, 17 Sep 2010 11:30:04 GMT</pubDate></item><item><title><![CDATA[Reply to "bits" of a larger project.... on Fri, 17 Sep 2010 07:03:11 GMT]]></title><description><![CDATA[<p dir="auto">Xelkos I think you can delete a post yourself, I'll check.</p>
<p dir="auto">I can't find it  <img src="/assets/uploads/smileys/thinking.gif" alt=":think:" title="Thinking" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/421125</link><guid isPermaLink="true">https://multitool.ninja/post/421125</guid><dc:creator><![CDATA[Threeme2189]]></dc:creator><pubDate>Fri, 17 Sep 2010 07:03:11 GMT</pubDate></item><item><title><![CDATA[Reply to "bits" of a larger project.... on Fri, 17 Sep 2010 06:09:16 GMT]]></title><description><![CDATA[<p dir="auto"><em>Believe me, I do have a fondness for Leatherman tools despite their shortcomings. While I do not own any of those weapons, I can tell you without a doubt, of any current multitools out there, if I wanted a weapon specific tool I would choose a Multitasker above any Gerber or Leatherman. I have the full second generation of the Multitasker line-up. From a perfectionist that pays attention to detail, I can tell you that the craftsmanship and build quality of these tools put Gerber and Leatherman to shame, seriously. But then again, that is just my opinion. I have been overdue posting my insights/opinions on them but will do so soon. The MUT will no doubt suit a specific niche. I have yet to handle one. I am not overly excited about them and will wait a while. I will probably get one at some point, but unless I came across a killer deal on one, traded work for one or I am bought one, etc... I won't be getting one anytime soon. Too rich for my blood. Don't get me wrong, I see tons of modding potential with the MUT. But at this point in time, for me it is more hype than anything. With my highly modified Surge, I don't see much I could do with a MUT task-wise that I couldn't do as well, if not better with my Surge. By the way, the sides of the ST300 plier head on my Surge work well as makeshift hammers. I am actually making sacrificial hammer faces for them. As for the longer MUT drivers? Not to worry. Evil's new bits do everything those can do... and some things they can't. I'll be posting them soon.....  ;)</em></p>
]]></description><link>https://multitool.ninja/post/421113</link><guid isPermaLink="true">https://multitool.ninja/post/421113</guid><dc:creator><![CDATA[evil510]]></dc:creator><pubDate>Fri, 17 Sep 2010 06:09:16 GMT</pubDate></item><item><title><![CDATA[Reply to "bits" of a larger project.... on Fri, 17 Sep 2010 04:51:59 GMT]]></title><description><![CDATA[<p dir="auto"><strong>E510</strong>,<br />
The folks with AR-15 types of rifles ran into an issue with bits that a certain Gerber tool has a tool for. Am sure an enterprising individual such as yourself could come up with your version, and it would be loads better and make your famous and rich maybe. Who knows, maybe even Leatherman would offer to buy your patent idea.</p>
<p dir="auto">Now short on time so going to list his posts and photos chronologically, as I have to get up when I am usually going to bed. Have a meeting and possible interview in the wee hours tomorrow morning.</p>
<p dir="auto">Not sure if you'd be interested in coming up with such a bit. Leatherman was just apprised of this today too.</p>
<blockquote>
<p dir="auto">@Sai Balingit said:<br />
(Over at <a href="http://www.facebook.com/leathermanusa" rel="nofollow ugc">http://www.facebook.com/leathermanusa</a> btw.)<br />
Post 1:  Any plans to make a multi tool made for cleaning and adjusting weapons? I was firing at a range in Afghanistan and I needed to adjust my front sight on my M4. Usually, we use bullets or nails to make the adjustment. A fellow shooter pulled out a Gerber tool (seen here:<a href="http://gerber-efect.com/" rel="nofollow ugc"> http://gerber-efect.com/</a>) and we were all amazed! ...I am very faithful to Leatherman and I believe very strongly that if you guys make a tool like that, it will be sought after from a lot of military, law enforcement, and professional shooters! Just thought I'd ask!</p>
<p dir="auto">Post 2: I just wanted to add that I know the MUT is going to have tools to clean and adjust... To be a little more specific, any plans on adding a front sight adjustment tool?</p>
<p dir="auto">Post 3: Thank you for your support! We all appreciate hearing that! I apologize for not being clear. What I'm talking about is the ability to adjust the front sights of M16s, AR-15s, and M4s. When zeroing (calibrating), sometimes we have to turn th...e front sight clockwise or counter c/w. Usually this is done with an extra round because the tip is narrow enough to fit in one of the grooves. If your screwdriver bits fit like that then thats great but the actual tool i was speaking of consists of about 4 prongs that sit perfectly in the front sight and turns easily. I will create another post on your wall with a picture of the tool.</p>
<p dir="auto">Post 4: this is an example of a front sight adjustment tool<br />
<img src="http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs664.snc4/60415_147316255305103_100000801873023_197466_8242757_n.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Post 5: and in this photo, the red arrow points to where the adjustment is made<br />
<img src="http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs618.snc4/59866_147316418638420_100000801873023_197467_8347995_n.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Post 6: I hope that cleared up any confusion. The only reason I bring it up is when we needed it, it was attached to a Gerber tool. Personally, I'd like to see it featured on a Leatherman. I own a Charge, Crunch, and a Skeletool. The MUT is next on my list and if in the future there is a tool with a front sight adjustment tool on it, I will definitely buy that too!</p>
</blockquote>
<p dir="auto">PS: Tired, sorry for the typos.</p>
]]></description><link>https://multitool.ninja/post/421097</link><guid isPermaLink="true">https://multitool.ninja/post/421097</guid><dc:creator><![CDATA[Outback in Idaho]]></dc:creator><pubDate>Fri, 17 Sep 2010 04:51:59 GMT</pubDate></item><item><title><![CDATA[Reply to "bits" of a larger project.... on Fri, 17 Sep 2010 03:30:11 GMT]]></title><description><![CDATA[<p dir="auto">I missed this thread somehow..</p>
<p dir="auto">These bits are amazing!  I want that bottle opener bit!  Simply amazing!</p>
]]></description><link>https://multitool.ninja/post/421073</link><guid isPermaLink="true">https://multitool.ninja/post/421073</guid><dc:creator><![CDATA[Mr. Whippy]]></dc:creator><pubDate>Fri, 17 Sep 2010 03:30:11 GMT</pubDate></item><item><title><![CDATA[Reply to "bits" of a larger project.... on Fri, 17 Sep 2010 03:46:35 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/benner" aria-label="Profile: Benner">@<bdi>Benner</bdi></a> <a href="/post/420712">said</a>:<br />
Very impressive  <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto"><em>Thanks Benner!</em></p>
<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/andreas" aria-label="Profile: Andreas">@<bdi>Andreas</bdi></a> <a href="/post/420715">said</a>:<br />
Excellent as always ;)</p>
<p dir="auto">PS: check your PM</p>
</blockquote>
<p dir="auto"><em>Thanks Andreas! I just checked and will reply shortly.....</em></p>
<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/sparky415" aria-label="Profile: sparky415">@<bdi>sparky415</bdi></a> <a href="/post/420717">said</a>:<br />
:o<br />
Great work as usual  <img src="/assets/uploads/smileys/gimme.gif" alt=":gimme:" title="gimme" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto"><em>Thanks Sparky!</em></p>
<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/sawman" aria-label="Profile: sawman">@<bdi>sawman</bdi></a> <a href="/post/420722">said</a>:<br />
When will you start taking orders for the Evil 128 piece bit kit  <img src="/assets/uploads/smileys/poke2.gif" alt=":pok:" title="pok" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto"><em>I know, I know. I really should look into such things.....</em></p>
<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/slackone" aria-label="Profile: SlackOne">@<bdi>SlackOne</bdi></a> <a href="/post/420816">said</a>:<br />
I just got to know...how many bit carriers are you using to contain all of this awesome?  Or is the Super Evil Bit Carrier next?</p>
</blockquote>
<p dir="auto"><em>With this latest bit, I now have both bit cards full of custom bits that I will actually use on a regular basis. All other bits for the LM bit cards that I create from this point on will simply be added to the rotation. It drives me crazy to have an empty spot on one of the cards or a bit I know I will not make use of. I also carry one third custom bit card that I just finished making recently. It carries a new set of bits that I made. Look for them soon in an upcoming post.....</em></p>
<blockquote>
<p dir="auto">@Xelkos <a href="/post/420880">said</a>:<br />
He's probably working on a roll out mat for all his bits.  :D</p>
</blockquote>
<p dir="auto"><em>A roll out mat, not quite... however, I have been tinkering around with different, more compact ways of carrying a multitude of bits.....  ;)</em></p>
]]></description><link>https://multitool.ninja/post/421069</link><guid isPermaLink="true">https://multitool.ninja/post/421069</guid><dc:creator><![CDATA[evil510]]></dc:creator><pubDate>Fri, 17 Sep 2010 03:46:35 GMT</pubDate></item><item><title><![CDATA[Reply to "bits" of a larger project.... on Thu, 16 Sep 2010 18:52:22 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/slackone" aria-label="Profile: SlackOne">@<bdi>SlackOne</bdi></a> <a href="/post/420816">said</a>:<br />
I just got to know...how many bit carriers are you using to contain all of this awesome?  Or is the Super Evil Bit Carrier next?</p>
</blockquote>
<p dir="auto">He's probably working on a roll out mat for all his bits.  :D</p>
]]></description><link>https://multitool.ninja/post/420880</link><guid isPermaLink="true">https://multitool.ninja/post/420880</guid><dc:creator><![CDATA[Outback in Idaho]]></dc:creator><pubDate>Thu, 16 Sep 2010 18:52:22 GMT</pubDate></item></channel></rss>