<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0"><channel><title><![CDATA[Replace worn out hook and loop with snaps]]></title><description><![CDATA[<p dir="auto">I am not a fan of noisy, lint attracting hook and loop ("Velcro") fasteners used in holsters.   So when the hook and loop wears out, I drill holes through the nylon fabric and install metal snaps.</p>
<p dir="auto">Too, I use a black felt tip marker to subdue the brand labels or remove the labels completely, as done with the <a href="http://www.niteize.com/products/mini-pock-its" rel="nofollow ugc">Nite-Ize Mini-Pock-Its</a> shown below.</p>
<p dir="auto"><img src="http://parnass.com/images/snaps-installed1.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="http://parnass.com/images/snaps-installed2.jpg" alt="" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/topic/21048/replace-worn-out-hook-and-loop-with-snaps</link><generator>RSS for Node</generator><lastBuildDate>Thu, 19 Nov 2026 01:50:19 GMT</lastBuildDate><atom:link href="https://multitool.ninja/topic/21048.rss" rel="self" type="application/rss+xml"/><pubDate>Mon, 05 Jul 2010 21:04:35 GMT</pubDate><ttl>60</ttl><item><title><![CDATA[Reply to Replace worn out hook and loop with snaps on Tue, 06 Jul 2010 00:38:55 GMT]]></title><description><![CDATA[<p dir="auto">I always use a hot nail, no fray this way.</p>
]]></description><link>https://multitool.ninja/post/392845</link><guid isPermaLink="true">https://multitool.ninja/post/392845</guid><dc:creator><![CDATA[jzmtl]]></dc:creator><pubDate>Tue, 06 Jul 2010 00:38:55 GMT</pubDate></item><item><title><![CDATA[Reply to Replace worn out hook and loop with snaps on Tue, 06 Jul 2010 00:36:06 GMT]]></title><description><![CDATA[<p dir="auto">Hey, thanks. Converting over my remaining Velcro sheaths should make a good afternoon project.</p>
]]></description><link>https://multitool.ninja/post/392843</link><guid isPermaLink="true">https://multitool.ninja/post/392843</guid><dc:creator><![CDATA[Spoonrobot]]></dc:creator><pubDate>Tue, 06 Jul 2010 00:36:06 GMT</pubDate></item><item><title><![CDATA[Reply to Replace worn out hook and loop with snaps on Mon, 05 Jul 2010 23:34:59 GMT]]></title><description><![CDATA[<p dir="auto">A basic overview of snaps appears <a href="http://www.denverfabrics.com/pages/sewinginfo/hsc-sewing-hints/sewing-snaps.htm" rel="nofollow ugc">here</a>.</p>
<p dir="auto">There are two basic types of snaps: post style and prong style.  The best type for use on nylon holsters is the post type which requires making a single hole in the holster cover and another mating hole in the holster body.</p>
<p dir="auto">Each snap is composed of 4 pieces (see attached photo):</p>
<ul>
<li>
<p dir="auto">cap</p>
</li>
<li>
<p dir="auto">stud</p>
</li>
<li>
<p dir="auto">socket</p>
</li>
<li>
<p dir="auto">eyelet</p>
</li>
</ul>
<p dir="auto">There are a few ways to make the holes in your nylon holster to accommodate the snap post.  I used an electric drill, but you might melt a hole with a heated awl or nail instead.  Be sure the hole isn't larger than the snap's post diameter or else the snap will fit too loosely.</p>
<p dir="auto">I placed a small block of wood inside the holster before drilling to avoid drilling through the entire holster and out the back.  :D</p>
<p dir="auto">Some inexpensive snap assortment kits come with a pin punch-type installation tool which you hit with a hammer.  I found that difficult to use and easy to smash your fingers.  Instead, I use a pliers style tool similar to this <em>Dritz® Mighty Snap-A-Plier For Heavy Duty Snaps</em>:</p>
<p dir="auto"><div class="card col-md-9 col-lg-6 position-relative link-preview p-0">

<div class="card-body">
<h5 class="card-title">
<a class="text-decoration-none" href="http://23.50.131.159/joann/catalog/productdetail.jsp?CATID&#x3D;cat2851&amp;PRODID&#x3D;prd34657">
Invalid URL
</a>
</h5>
<p class="card-text line-clamp-3"></p>
</div>
<a href="http://23.50.131.159/joann/catalog/productdetail.jsp?CATID&#x3D;cat2851&amp;PRODID&#x3D;prd34657" class="card-footer text-body-secondary small d-flex gap-2 align-items-center lh-2">



<img src="http://23.50.131.159/favicon.ico" alt="favicon" class="not-responsive overflow-hiddden" style="max-width: 21px; max-height: 21px;" onerror="this.remove()"/>



<p class="d-inline-block text-truncate mb-0"> <span class="text-secondary">(www.joann.com)</span></p>
</a>
</div></p>
<p dir="auto">I have 2 sizes of snap, each with different length posts.  If the nylon material is too thick, the shorter post snaps won't reach through.  If you have snaps with a post which is too long, you can either shorten the post using a Dremel tool and cutoff wheel, or just install a washer as a shim.  The latter workaround is easier, though using a shim washer can cause the snap to protrude a little further from the material.</p>
<p dir="auto">Suggest you practice first on a scrap piece of nylon or leather.</p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/22094_snap-pieces.jpg" alt="snap-pieces.jpg" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/392829</link><guid isPermaLink="true">https://multitool.ninja/post/392829</guid><dc:creator><![CDATA[parnass]]></dc:creator><pubDate>Mon, 05 Jul 2010 23:34:59 GMT</pubDate></item><item><title><![CDATA[Reply to Replace worn out hook and loop with snaps on Mon, 05 Jul 2010 21:26:34 GMT]]></title><description><![CDATA[<p dir="auto">So, what's all involved in adding snaps?</p>
<p dir="auto">I've seen the kits they sell at hobby shops but haven't ventured to try one yet.</p>
]]></description><link>https://multitool.ninja/post/392812</link><guid isPermaLink="true">https://multitool.ninja/post/392812</guid><dc:creator><![CDATA[Spoonrobot]]></dc:creator><pubDate>Mon, 05 Jul 2010 21:26:34 GMT</pubDate></item></channel></rss>