<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0"><channel><title><![CDATA[Second Generation Multitasker.]]></title><description><![CDATA[<p dir="auto">I was lucky enough to buy a second generation Multitasker. I am going to compare the second generation to the first to see what has changed.</p>
<p dir="auto">After quickly examining the second generation of the Multitasker tool, I was surprised at the many changes from the first generation. The sheath shows many improvements over the old. The first gen tool came in a complex sheath with several secondary pockets. I in fact liked the sheath because of its storage options. The new sheath is harder and molded more around the multi-tool somewhat. There is also no Velcro, A snap is used instead. I personally do not mind Velcro, but I know plenty of people who hate the stuff. Velcro does tend to pick up lots of unwanted materials in a field setting, not to mention the noise. The new sheath is also a bit larger, meaning you could probably put something fairly small in the main pocket with your multitasker if you so wished.</p>
<p dir="auto"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Leather%20Projects/IMG_1250small.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Both versions of the sheath are identical as far as belt loops are concerned.</p>
<p dir="auto"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Leather%20Projects/IMG_1266small.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Both versions also comes with a 10 screwdriver bit kit . The first gen sheath stored these bits and their carrier in a separate front pouch. The new sheath has an elastic rear pouch for this purpose.  I would think the newer sheath would be better for day to day use as you are less likely to lose your bits. Of course the tradeoff is more difficult access to those bits when you need them. This means that the main tool pocket for each generation also differs. The first gen sheath placed the Multitasker towards the back, and the newest version towards the front. I prefer the newer sheath’s ergonomics of placing what you use the most at the front for easier access and retrieval.</p>
<p dir="auto"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Leather%20Projects/IMG_1252small.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Now the changes just didn’t stop with the sheath. The second generation bit carrier is also improved. It is now a two piece unit which insures that your bits won’t fall out on their own. This is a big advantage over the older design as seen on the left hand side of the following photograph. The second gen tool also has the name of the tool on the handle. Note the two tools that stick out on the first gen Multitasker on the left.  Sometimes, these would get caught in the sheath. The newer tool has better ergonomics as no tools stick out from the handles when stored away.<br />
<img src="http://i145.photobucket.com/albums/r207/Chako_photo/Leather%20Projects/IMG_1253small.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">The first generation is on the left, the second generation of the right for the two following photos. One thing about Multitaskers, they are clearly labeled on the pliers. So if you can see the plier head, you don’t have to guess at what generation you have.</p>
<p dir="auto"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Leather%20Projects/IMG_1255small.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">There is a cutout on the second generation tool that makes room for the sight adjustment tool/bit holder.</p>
<p dir="auto"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Leather%20Projects/IMG_1260small.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">The second generation also improves on the tool layout. New is the removable brass pick. Once you remove it, you get an attachment point for an OTIS cleaning kit that shares the same thread pattern. Rather ingenious as you can use the second gen Multitasker as a handle for the cleaning kit. All other tools are the same to the first gen multi-tool, if not in the same location.</p>
<p dir="auto">Second Generation Multitasker tool load out.<br />
<img src="http://i145.photobucket.com/albums/r207/Chako_photo/Leather%20Projects/IMG_1261small.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">First Generation Multitasker tool load out.<br />
<img src="http://i145.photobucket.com/albums/r207/Chako_photo/Leather%20Projects/IMG_1264small.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">So there you have it, a short comparison between the first and second generation of the Multitasker. The second gen tool improves on the older model in many ways. The sheath, bit holder, tool ergonomics, and expansion with the OTIS kit, are all features that make the second generation an improved tool over its predecessor.</p>
]]></description><link>https://multitool.ninja/topic/22452/second-generation-multitasker</link><generator>RSS for Node</generator><lastBuildDate>Mon, 16 Nov 2026 18:41:54 GMT</lastBuildDate><atom:link href="https://multitool.ninja/topic/22452.rss" rel="self" type="application/rss+xml"/><pubDate>Thu, 02 Sep 2010 01:44:58 GMT</pubDate><ttl>60</ttl><item><title><![CDATA[Reply to Second Generation Multitasker. on Mon, 05 Sep 2011 03:00:45 GMT]]></title><description><![CDATA[<p dir="auto">Thanks for the kind words Bob. I like the tool so much that when I heard the ball bearing is discontinued I bought one from edcknives. I owned one before but no longer have it. When I heard it was being discontinued I bought another right away. I am sure the new tool will be great, even better but I had to have one of these in my collection.</p>
<p dir="auto">Mat, I can't wait for the edc model. I bet more stores will pick that one up.</p>
]]></description><link>https://multitool.ninja/post/515516</link><guid isPermaLink="true">https://multitool.ninja/post/515516</guid><dc:creator><![CDATA[scrappy]]></dc:creator><pubDate>Mon, 05 Sep 2011 03:00:45 GMT</pubDate></item><item><title><![CDATA[Reply to Second Generation Multitasker. on Mon, 05 Sep 2011 02:11:12 GMT]]></title><description><![CDATA[<p dir="auto">EDC EDC EDC EDC version  <img src="/assets/uploads/smileys/gimme.gif" alt=":gimme:" title="gimme" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/gimme.gif" alt=":gimme:" title="gimme" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/gimme.gif" alt=":gimme:" title="gimme" class="forum-smiley emoji" /> :D :D :D</p>
]]></description><link>https://multitool.ninja/post/515498</link><guid isPermaLink="true">https://multitool.ninja/post/515498</guid><dc:creator><![CDATA[MultiMat]]></dc:creator><pubDate>Mon, 05 Sep 2011 02:11:12 GMT</pubDate></item><item><title><![CDATA[Reply to Second Generation Multitasker. on Mon, 05 Sep 2011 00:02:27 GMT]]></title><description><![CDATA[<p dir="auto">All good points Scrappy. <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /> Great comparison pics too. :)</p>
]]></description><link>https://multitool.ninja/post/515439</link><guid isPermaLink="true">https://multitool.ninja/post/515439</guid><dc:creator><![CDATA[J-sews]]></dc:creator><pubDate>Mon, 05 Sep 2011 00:02:27 GMT</pubDate></item><item><title><![CDATA[Reply to Second Generation Multitasker. on Sun, 04 Sep 2011 20:08:51 GMT]]></title><description><![CDATA[<p dir="auto">I thought I would bring this to the top again ans show some comparison shots. The multitasker is shorter when closed than the super tool, core, swiss tool or freehand BUT the screw driver and pliers are longer. It has the longest driver I am aware of and the bits are formed very well. You can see here the plier is also longer than the competition. better reach, all in a smaller handle. The knife is shorter but very usable.<br />
<img src="http://i246.photobucket.com/albums/gg113/terry6540/DSCN1223.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i246.photobucket.com/albums/gg113/terry6540/DSCN1221.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i246.photobucket.com/albums/gg113/terry6540/DSCN1226.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i246.photobucket.com/albums/gg113/terry6540/DSCN1222.jpg" alt="" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/515355</link><guid isPermaLink="true">https://multitool.ninja/post/515355</guid><dc:creator><![CDATA[scrappy]]></dc:creator><pubDate>Sun, 04 Sep 2011 20:08:51 GMT</pubDate></item><item><title><![CDATA[Reply to Second Generation Multitasker. on Wed, 02 Mar 2011 03:06:12 GMT]]></title><description><![CDATA[<p dir="auto">Big blade looks awesome, and it might help sales, but if one was really honest I think they would find the smaller blade is more than adequate, so I'd have to go for the reduced weight and cost of the small blade. ....but.... I know that market screams for large blades with LM making such a big deal out of it.</p>
]]></description><link>https://multitool.ninja/post/470492</link><guid isPermaLink="true">https://multitool.ninja/post/470492</guid><dc:creator><![CDATA[ICanFixThat]]></dc:creator><pubDate>Wed, 02 Mar 2011 03:06:12 GMT</pubDate></item><item><title><![CDATA[Reply to Second Generation Multitasker. on Wed, 02 Mar 2011 02:55:30 GMT]]></title><description><![CDATA[<p dir="auto">This proto is just an expiremental platform for the larger, outboard-mounted knife blade. The pliers and such are standard Generation II. <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /></p>
<p dir="auto">As regards plier opening/width, I agree with you Scrappy. I'd like to see a bit more opening width myself. But then again, I'd also ask for a large-tooth, large gripping area, just like all other multitool plier jaws have. I guess the Multitasker folks are thinking that with no provision in these jaws to grab onto large diameter objects, the pliers don't need to open as wide...? <img src="/assets/uploads/smileys/thinking.gif" alt=":think:" title="Thinking" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/470487</link><guid isPermaLink="true">https://multitool.ninja/post/470487</guid><dc:creator><![CDATA[J-sews]]></dc:creator><pubDate>Wed, 02 Mar 2011 02:55:30 GMT</pubDate></item><item><title><![CDATA[Reply to Second Generation Multitasker. on Wed, 02 Mar 2011 01:01:40 GMT]]></title><description><![CDATA[<p dir="auto">Bob,</p>
<p dir="auto">what do the pliers on that proto look like?<br />
my only complaint would be the pliers do not open wide.</p>
]]></description><link>https://multitool.ninja/post/470464</link><guid isPermaLink="true">https://multitool.ninja/post/470464</guid><dc:creator><![CDATA[scrappy]]></dc:creator><pubDate>Wed, 02 Mar 2011 01:01:40 GMT</pubDate></item><item><title><![CDATA[Reply to Second Generation Multitasker. on Wed, 02 Mar 2011 00:53:46 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/j-sews" aria-label="Profile: J-sews">@<bdi>J-sews</bdi></a> <a href="/post/470212">said</a>:<br />
Speaking of Multitasker, I've been playing with a few of Shane's new concepts for the past week or so. One of them is a model with a knife blade mounted outside of the plier channel, which of course allows the blade to be much larger.</p>
<p dir="auto">Teaser pic, compared to a standard Generation II model:</p>
<p dir="auto"><img src="http://img.photobucket.com/albums/v307/jooliesews/Bobbys/newblade.jpg" alt="" class="img-markdown  img-fluid" /></p>
</blockquote>
<p dir="auto">ah, my work blocks the pic. I better go check on my phone.</p>
]]></description><link>https://multitool.ninja/post/470462</link><guid isPermaLink="true">https://multitool.ninja/post/470462</guid><dc:creator><![CDATA[scrappy]]></dc:creator><pubDate>Wed, 02 Mar 2011 00:53:46 GMT</pubDate></item><item><title><![CDATA[Reply to Second Generation Multitasker. on Tue, 01 Mar 2011 10:00:08 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/j-sews" aria-label="Profile: J-sews">@<bdi>J-sews</bdi></a> <a href="/post/470212">said</a>:<br />
Speaking of Multitasker, I've been playing with a few of Shane's new concepts for the past week or so. One of them is a model with a knife blade mounted outside of the plier channel, which of course allows the blade to be much larger.</p>
<p dir="auto">Teaser pic, compared to a standard Generation II model:</p>
<p dir="auto"><img src="http://img.photobucket.com/albums/v307/jooliesews/Bobbys/newblade.jpg" alt="" class="img-markdown  img-fluid" /></p>
</blockquote>
<p dir="auto">Looks great! Is that proto going to be a bit more EDC?  <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /> Or rifle specific as well  :(</p>
]]></description><link>https://multitool.ninja/post/470272</link><guid isPermaLink="true">https://multitool.ninja/post/470272</guid><dc:creator><![CDATA[zepla]]></dc:creator><pubDate>Tue, 01 Mar 2011 10:00:08 GMT</pubDate></item><item><title><![CDATA[Reply to Second Generation Multitasker. on Tue, 01 Mar 2011 06:13:49 GMT]]></title><description><![CDATA[<p dir="auto">While I prefer a PE in a dedicated folder, I think in a multi CE makes a lot of sense. Multis are all about trading ultimate effectiveness for more versatility and in that mind set a CE fits right in. Would I prefer a PE? Sure, but I don't object to a CE either since it's at least logical in a multi, as opposed to on a dedicated where it just results in two half-assed blades. A multi is already a large collection of half-assed tools anyway lol.</p>
]]></description><link>https://multitool.ninja/post/470243</link><guid isPermaLink="true">https://multitool.ninja/post/470243</guid><dc:creator><![CDATA[thebullfrog]]></dc:creator><pubDate>Tue, 01 Mar 2011 06:13:49 GMT</pubDate></item><item><title><![CDATA[Reply to Second Generation Multitasker. on Tue, 01 Mar 2011 05:03:11 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/j-sews" aria-label="Profile: J-sews">@<bdi>J-sews</bdi></a> <a href="/post/470212">said</a>:<br />
Speaking of Multitasker, I've been playing with a few of Shane's new concepts for the past week or so. One of them is a model with a knife blade mounted outside of the plier channel, which of course allows the blade to be much larger.</p>
<p dir="auto">Teaser pic, compared to a standard Generation II model:</p>
<p dir="auto"><img src="http://img.photobucket.com/albums/v307/jooliesews/Bobbys/newblade.jpg" alt="" class="img-markdown  img-fluid" /></p>
</blockquote>
<p dir="auto">CE. &gt;:(</p>
]]></description><link>https://multitool.ninja/post/470229</link><guid isPermaLink="true">https://multitool.ninja/post/470229</guid><dc:creator><![CDATA[ari6126]]></dc:creator><pubDate>Tue, 01 Mar 2011 05:03:11 GMT</pubDate></item><item><title><![CDATA[Reply to Second Generation Multitasker. on Tue, 01 Mar 2011 03:54:32 GMT]]></title><description><![CDATA[<p dir="auto">Ooohhh man that is sweet. Just one more thing to make me wish I had a DeLorean with a flux capacitor so I could get my hands on the EDC. I have never been more anxious to see a tool before.</p>
]]></description><link>https://multitool.ninja/post/470214</link><guid isPermaLink="true">https://multitool.ninja/post/470214</guid><dc:creator><![CDATA[thebullfrog]]></dc:creator><pubDate>Tue, 01 Mar 2011 03:54:32 GMT</pubDate></item><item><title><![CDATA[Reply to Second Generation Multitasker. on Tue, 01 Mar 2011 03:42:54 GMT]]></title><description><![CDATA[<p dir="auto">Speaking of Multitasker, I've been playing with a few of Shane's new concepts for the past week or so. One of them is a model with a knife blade mounted outside of the plier channel, which of course allows the blade to be much larger.</p>
<p dir="auto">Teaser pic, compared to a standard Generation II model:</p>
<p dir="auto"><img src="http://img.photobucket.com/albums/v307/jooliesews/Bobbys/newblade.jpg" alt="" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/470212</link><guid isPermaLink="true">https://multitool.ninja/post/470212</guid><dc:creator><![CDATA[J-sews]]></dc:creator><pubDate>Tue, 01 Mar 2011 03:42:54 GMT</pubDate></item><item><title><![CDATA[Reply to Second Generation Multitasker. on Tue, 01 Mar 2011 01:38:23 GMT]]></title><description><![CDATA[<p dir="auto">Bob<br />
Thanks fort the pic,that's what mine looks like. I will be using the anvil cutters in the next couple of days. I'Ve used the pliers and they are very strong</p>
<p dir="auto">Chako<br />
That bearing pivot is awesome, huh?</p>
]]></description><link>https://multitool.ninja/post/470176</link><guid isPermaLink="true">https://multitool.ninja/post/470176</guid><dc:creator><![CDATA[scrappy]]></dc:creator><pubDate>Tue, 01 Mar 2011 01:38:23 GMT</pubDate></item><item><title><![CDATA[Reply to Second Generation Multitasker. on Tue, 01 Mar 2011 01:31:35 GMT]]></title><description><![CDATA[<p dir="auto">I am a big fan of Multitasker tools. Love their quality and attention to detail.</p>
<p dir="auto">Yes, the roller bearing pivot is the second run of the second generation. My first photo in this thread shows the first production run of the second generation. I think of them as 2.0 and 2.1 for some reason.</p>
]]></description><link>https://multitool.ninja/post/470171</link><guid isPermaLink="true">https://multitool.ninja/post/470171</guid><dc:creator><![CDATA[Chako]]></dc:creator><pubDate>Tue, 01 Mar 2011 01:31:35 GMT</pubDate></item><item><title><![CDATA[Reply to Second Generation Multitasker. on Tue, 01 Mar 2011 01:19:39 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/scrappy" aria-label="Profile: scrappy">@<bdi>scrappy</bdi></a> <a href="/post/469679">said</a>:<br />
Bob<br />
I know this is an old thread but I just got a multitasker. Is that pic a series 2? My tool looked a little different. I will look at it closerm The teeth on the pliers I got fit better than any tool I have seen. There is no play or wobble at all. I have carried it three days. I plan to carry it a couple weeks and decide if I will edc it. It costs as much as a charge AL but after feeling the quality I don't mind paying that price. D2 head, bronze washers, 440c knife, g10 handle. CNC parts... It is as premium a tool as the charge.</p>
</blockquote>
<p dir="auto">Congrats on the Multitasker aquisition Scrappy!! <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /></p>
<p dir="auto">That picture in my previous post was a very early prototype version of the Series II. Notice it still had the bypass wire cutters at that point, and did not have the roller bearings in the pivot yet.</p>
<p dir="auto">The production version pliers are shown below:</p>
<p dir="auto"><img src="http://img.photobucket.com/albums/v307/jooliesews/Bobbys/Reviews/MT14.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Notice the anvil-type wire cutters, and roller bearing pivot. 8)</p>
]]></description><link>https://multitool.ninja/post/470161</link><guid isPermaLink="true">https://multitool.ninja/post/470161</guid><dc:creator><![CDATA[J-sews]]></dc:creator><pubDate>Tue, 01 Mar 2011 01:19:39 GMT</pubDate></item><item><title><![CDATA[Reply to Second Generation Multitasker. on Sun, 27 Feb 2011 21:35:21 GMT]]></title><description><![CDATA[<p dir="auto">I need to get one of these!  They have precision I like, and they just look great.</p>
]]></description><link>https://multitool.ninja/post/469807</link><guid isPermaLink="true">https://multitool.ninja/post/469807</guid><dc:creator><![CDATA[ICanFixThat]]></dc:creator><pubDate>Sun, 27 Feb 2011 21:35:21 GMT</pubDate></item><item><title><![CDATA[Reply to Second Generation Multitasker. on Sun, 27 Feb 2011 16:14:22 GMT]]></title><description><![CDATA[<p dir="auto">Bob<br />
I know this is an old thread but I just got a multitasker. Is that pic a series 2? My tool looked a little different. I will look at it closerm The teeth on the pliers I got fit better than any tool I have seen. There is no play or wobble at all. I have carried it three days. I plan to carry it a couple weeks and decide if I will edc it. It costs as much as a charge AL but after feeling the quality I don't mind paying that price. D2 head, bronze washers, 440c knife, g10 handle. CNC parts... It is as premium a tool as the charge.</p>
]]></description><link>https://multitool.ninja/post/469679</link><guid isPermaLink="true">https://multitool.ninja/post/469679</guid><dc:creator><![CDATA[scrappy]]></dc:creator><pubDate>Sun, 27 Feb 2011 16:14:22 GMT</pubDate></item><item><title><![CDATA[Reply to Second Generation Multitasker. on Sat, 04 Sep 2010 03:08:07 GMT]]></title><description><![CDATA[<p dir="auto">The talk above about billet-machined pliers reminds me of how impressed I was when I first saw this tool at the Shot Show. <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /> I mean, check out the way those jaws fit together! Where the little serrations are....every zig on one jaw fits into a corresponding zag on the opposite jaw! :o</p>
<p dir="auto"><img src="http://img.photobucket.com/albums/v307/jooliesews/Bobbys/Shot%20Show%2010/MT6.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Plier esthetics at their finest! <img src="/assets/uploads/smileys/multitool.gif" alt=":multi:" title="multi" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/415909</link><guid isPermaLink="true">https://multitool.ninja/post/415909</guid><dc:creator><![CDATA[J-sews]]></dc:creator><pubDate>Sat, 04 Sep 2010 03:08:07 GMT</pubDate></item><item><title><![CDATA[Reply to Second Generation Multitasker. on Fri, 03 Sep 2010 12:22:58 GMT]]></title><description><![CDATA[<p dir="auto">LMAO, yesterday when I was at my buddies house, he asked me what do I usually do when I'm on the internet bored. I told him I have a tendency to just Google random Sht, so he did just that and apparently found some fairly amusing videos.</p>
]]></description><link>https://multitool.ninja/post/415517</link><guid isPermaLink="true">https://multitool.ninja/post/415517</guid><dc:creator><![CDATA[thebullfrog]]></dc:creator><pubDate>Fri, 03 Sep 2010 12:22:58 GMT</pubDate></item><item><title><![CDATA[Reply to Second Generation Multitasker. on Fri, 03 Sep 2010 10:26:26 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/thebullfrog" aria-label="Profile: thebullfrog">@<bdi>thebullfrog</bdi></a> <a href="/post/414889">said</a>:<br />
Oh believe me, I Google random crap all the time.</p>
</blockquote>
<p dir="auto">Just googled "random crap" myself. Didn't see any interesting results... What's the fun in doing that, that makes you do it all the time? <img src="/assets/uploads/smileys/thinking.gif" alt=":think:" title="Thinking" class="forum-smiley emoji" /> :P :D</p>
]]></description><link>https://multitool.ninja/post/415486</link><guid isPermaLink="true">https://multitool.ninja/post/415486</guid><dc:creator><![CDATA[Nikos]]></dc:creator><pubDate>Fri, 03 Sep 2010 10:26:26 GMT</pubDate></item><item><title><![CDATA[Reply to Second Generation Multitasker. on Fri, 03 Sep 2010 01:19:24 GMT]]></title><description><![CDATA[<p dir="auto">From what I understand, mostly specialty gun shops like Brownells. You can from time to time catch them on eBay. Right now, there is one on sale from Australia.</p>
]]></description><link>https://multitool.ninja/post/415396</link><guid isPermaLink="true">https://multitool.ninja/post/415396</guid><dc:creator><![CDATA[Chako]]></dc:creator><pubDate>Fri, 03 Sep 2010 01:19:24 GMT</pubDate></item><item><title><![CDATA[Reply to Second Generation Multitasker. on Fri, 03 Sep 2010 00:58:43 GMT]]></title><description><![CDATA[<p dir="auto">so who sells these?</p>
]]></description><link>https://multitool.ninja/post/415394</link><guid isPermaLink="true">https://multitool.ninja/post/415394</guid><dc:creator><![CDATA[scrappy]]></dc:creator><pubDate>Fri, 03 Sep 2010 00:58:43 GMT</pubDate></item><item><title><![CDATA[Reply to Second Generation Multitasker. on Thu, 02 Sep 2010 20:37:00 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/chako" aria-label="Profile: Chako">@<bdi>Chako</bdi></a> <a href="/post/415219">said</a>:<br />
If you have pliers that close 110%, I am thinking they are broken.  :D</p>
</blockquote>
<p dir="auto">Hehehe, what I meant was that a good pair of needlenose pliers to me is one where the tip is precise enough to pick hair off your arm. I just reckoned that if you use flat pliers like this on something too hard and create small "bumps" in the metal (which I continually do to my wire cutters  :ahhh ) they wouldn't fit properly afterwards. But I have no knowledge of guns beyond knowing AR15 is an assault rifle and I don't know what kind of material is mentioned here so I guess that might not be an issue</p>
]]></description><link>https://multitool.ninja/post/415242</link><guid isPermaLink="true">https://multitool.ninja/post/415242</guid><dc:creator><![CDATA[Andreas]]></dc:creator><pubDate>Thu, 02 Sep 2010 20:37:00 GMT</pubDate></item></channel></rss>