<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0"><channel><title><![CDATA[Vic 111mm Backside Phillips is PANTS!!            (that's bad...)]]></title><description><![CDATA[<p dir="auto">The design of the backside Phillips on the 111mm Vic tools is craptacular.   I was testing it out as a T-handle tool and the thing completely failed. The Phillips head cut through the brass rod and bent the aluminum liner to smurf.</p>
<p dir="auto"><img src="http://i190.photobucket.com/albums/z231/bluebadger88/misc/locksmith/Picture025.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Looking at it, it's a combination of soft brass and lack of material in the liner.  If the there was a thick steel liner, it may have helped considerably.  It's a totally inadequate design for this tool.  &gt;:(</p>
<p dir="auto"><img src="http://i190.photobucket.com/albums/z231/bluebadger88/misc/locksmith/Picture034.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">This pic shows the cut through brass pin.</p>
<p dir="auto">My plan is to replace the pin with hardened stainless steel, but honestly, the thin outside liner makes me think it'll fail again.</p>
<p dir="auto">Victorinox: This needs to be addressed. :(</p>
]]></description><link>https://multitool.ninja/topic/22526/vic-111mm-backside-phillips-is-pants-thats-bad</link><generator>RSS for Node</generator><lastBuildDate>Mon, 16 Nov 2026 10:30:47 GMT</lastBuildDate><atom:link href="https://multitool.ninja/topic/22526.rss" rel="self" type="application/rss+xml"/><pubDate>Sun, 05 Sep 2010 00:48:44 GMT</pubDate><ttl>60</ttl><item><title><![CDATA[Reply to Vic 111mm Backside Phillips is PANTS!!            (that's bad...) on Tue, 14 Sep 2010 21:15:05 GMT]]></title><description><![CDATA[<p dir="auto">Hats off to Mr. W for carrying out that test.  <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /><br />
Now just a hundred or so more tests like that, on knives of various ages, and we should have some quite decent statistics.  :D</p>
<p dir="auto">I've got to say in defence of Victorinox that 10Nm is quite a lot for a small screwdriver.  It's more than I can comfortably exert on a medium-sized screwdriver handle without using both hands.  It's also enough to properly tighten an M8 bolt, and enough to completely destroy an M5 bolt.</p>
]]></description><link>https://multitool.ninja/post/420213</link><guid isPermaLink="true">https://multitool.ninja/post/420213</guid><dc:creator><![CDATA[tim]]></dc:creator><pubDate>Tue, 14 Sep 2010 21:15:05 GMT</pubDate></item><item><title><![CDATA[Reply to Vic 111mm Backside Phillips is PANTS!!            (that's bad...) on Tue, 07 Sep 2010 02:54:10 GMT]]></title><description><![CDATA[<p dir="auto">I just remembered something. I was using the awl on 91mm SAK to drill through eyes of a coconut, as it starts to penetrate the shell, I can feel the awl start to bind, and parts are flexing, I didn't apply a lot of torque to it, but I guess that's about all the stress aluminum/brass can take. Then again coconut shell is way harder than any wood I know.</p>
]]></description><link>https://multitool.ninja/post/417447</link><guid isPermaLink="true">https://multitool.ninja/post/417447</guid><dc:creator><![CDATA[jzmtl]]></dc:creator><pubDate>Tue, 07 Sep 2010 02:54:10 GMT</pubDate></item><item><title><![CDATA[Reply to Vic 111mm Backside Phillips is PANTS!!            (that's bad...) on Tue, 07 Sep 2010 02:14:16 GMT]]></title><description><![CDATA[<p dir="auto">with some very dodgy, theroetical calculations, the hook on a backspring should take 250 lbs, (non shock load) before the pin fails.</p>
<p dir="auto">Anyone got a sacriSAK and 250lbs to hang off it?</p>
]]></description><link>https://multitool.ninja/post/417430</link><guid isPermaLink="true">https://multitool.ninja/post/417430</guid><dc:creator><![CDATA[Sea Monster]]></dc:creator><pubDate>Tue, 07 Sep 2010 02:14:16 GMT</pubDate></item><item><title><![CDATA[Reply to Vic 111mm Backside Phillips is PANTS!!            (that's bad...) on Tue, 07 Sep 2010 01:19:14 GMT]]></title><description><![CDATA[<p dir="auto">We need to hear more about this one...</p>
<p dir="auto">(I think a stainless steel liner on the Phillips side would help.)</p>
]]></description><link>https://multitool.ninja/post/417412</link><guid isPermaLink="true">https://multitool.ninja/post/417412</guid><dc:creator><![CDATA[Mr. Whippy]]></dc:creator><pubDate>Tue, 07 Sep 2010 01:19:14 GMT</pubDate></item><item><title><![CDATA[Reply to Vic 111mm Backside Phillips is PANTS!!            (that's bad...) on Tue, 07 Sep 2010 00:55:10 GMT]]></title><description><![CDATA[<p dir="auto"><em>I am hoping oversized stainless steel might help a bit. Especially if they go through the thickness of both scales as well....  ;)  (high grade aluminum alloy, haven't made them yet) At this stage of modding, fashioning new stainless steel liners would be easy enough to do as well.....</em></p>
<p dir="auto"><img src="http://i824.photobucket.com/albums/zz166/evil510/Multitools/OHT/090620102450.jpg" alt="" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/417406</link><guid isPermaLink="true">https://multitool.ninja/post/417406</guid><dc:creator><![CDATA[evil510]]></dc:creator><pubDate>Tue, 07 Sep 2010 00:55:10 GMT</pubDate></item><item><title><![CDATA[Reply to Vic 111mm Backside Phillips is PANTS!!            (that's bad...) on Mon, 06 Sep 2010 21:29:35 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto">@Mr. Whippy <a href="/post/417329">said</a>:</p>
<p dir="auto">@Sea Monster <a href="/post/417278">said</a>:</p>
<blockquote></blockquote>
<p dir="auto">I don't have an in-lbs torque wrench</p>
<blockquote>
<p dir="auto">For those of us in....well, everywhere else in the world, what's the benefit of in-lbs over N.m?</p>
</blockquote>
<p dir="auto">ft lbs about 25% more than Nm.  An in lbs torque wrench is for tiny torque measurements (because an inch is 1/12th of a foot).</p>
<p dir="auto">1 N m = approximately 0.75 ft lbs</p>
<p dir="auto">1 Nm  = approximately 9 in lbs.</p>
<p dir="auto">My torque wrenches are for mechanics (cars, tractors and motorcycles) <strong>I have no need for in lb torque wrenches</strong></p>
</blockquote>
<p dir="auto">You <em>previously had</em> no use for in lb torque wrenches. Now you need to get one. And smash up more stuff :D</p>
]]></description><link>https://multitool.ninja/post/417356</link><guid isPermaLink="true">https://multitool.ninja/post/417356</guid><dc:creator><![CDATA[DaveK]]></dc:creator><pubDate>Mon, 06 Sep 2010 21:29:35 GMT</pubDate></item><item><title><![CDATA[Reply to Vic 111mm Backside Phillips is PANTS!!            (that's bad...) on Mon, 06 Sep 2010 21:06:05 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto">@Sea Monster <a href="/post/417278">said</a>:</p>
<p dir="auto">I don't have an in-lbs torque wrench</p>
<p dir="auto">For those of us in....well, everywhere else in the world, what's the benefit of in-lbs over N.m?</p>
</blockquote>
<p dir="auto">ft lbs about 25% more than Nm.  An in lbs torque wrench is for tiny torque measurements (because an inch is 1/12th of a foot).</p>
<p dir="auto">1 N m = approximately 0.75 ft lbs</p>
<p dir="auto">1 Nm  = approximately 9 in lbs.</p>
<p dir="auto">My torque wrenches are for mechanics (cars, tractors and motorcycles) I have no need for in lb torque wrenches</p>
]]></description><link>https://multitool.ninja/post/417329</link><guid isPermaLink="true">https://multitool.ninja/post/417329</guid><dc:creator><![CDATA[Mr. Whippy]]></dc:creator><pubDate>Mon, 06 Sep 2010 21:06:05 GMT</pubDate></item><item><title><![CDATA[Reply to Vic 111mm Backside Phillips is PANTS!!            (that's bad...) on Mon, 06 Sep 2010 20:44:12 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto">I don't have an in-lbs torque wrench</p>
</blockquote>
<p dir="auto">For those of us in....well, everywhere else in the world, what's the benefit of in-lbs over N.m?</p>
]]></description><link>https://multitool.ninja/post/417278</link><guid isPermaLink="true">https://multitool.ninja/post/417278</guid><dc:creator><![CDATA[Sea Monster]]></dc:creator><pubDate>Mon, 06 Sep 2010 20:44:12 GMT</pubDate></item><item><title><![CDATA[Reply to Vic 111mm Backside Phillips is PANTS!!            (that's bad...) on Mon, 06 Sep 2010 19:49:51 GMT]]></title><description><![CDATA[<p dir="auto">I'm wondering now if the hook can really carry 250lb with a jolt? that's a lot of force on such a thin pin <img src="/assets/uploads/smileys/thinking.gif" alt=":think:" title="Thinking" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/417226</link><guid isPermaLink="true">https://multitool.ninja/post/417226</guid><dc:creator><![CDATA[John]]></dc:creator><pubDate>Mon, 06 Sep 2010 19:49:51 GMT</pubDate></item><item><title><![CDATA[Reply to Vic 111mm Backside Phillips is PANTS!!            (that's bad...) on Mon, 06 Sep 2010 19:41:28 GMT]]></title><description><![CDATA[<p dir="auto">I've always lived by the rule only to use SAK tools (except for the knife blades) when a dedicated tool is not available. I've always felt the back side driver pin is too small in diameter.</p>
]]></description><link>https://multitool.ninja/post/417225</link><guid isPermaLink="true">https://multitool.ninja/post/417225</guid><dc:creator><![CDATA[cannonball]]></dc:creator><pubDate>Mon, 06 Sep 2010 19:41:28 GMT</pubDate></item><item><title><![CDATA[Reply to Vic 111mm Backside Phillips is PANTS!!            (that's bad...) on Mon, 06 Sep 2010 18:05:38 GMT]]></title><description><![CDATA[<p dir="auto">Dunno... ???</p>
<p dir="auto">I don't know really what it would take in torque.  I don't have an in-lbs torque wrench. :-\</p>
]]></description><link>https://multitool.ninja/post/417159</link><guid isPermaLink="true">https://multitool.ninja/post/417159</guid><dc:creator><![CDATA[Mr. Whippy]]></dc:creator><pubDate>Mon, 06 Sep 2010 18:05:38 GMT</pubDate></item><item><title><![CDATA[Reply to Vic 111mm Backside Phillips is PANTS!!            (that's bad...) on Mon, 06 Sep 2010 16:04:37 GMT]]></title><description><![CDATA[<p dir="auto">How much more torque would it be able to stand if the pivot area of the phillips (where the hole goes through) were made square, instead of round?</p>
]]></description><link>https://multitool.ninja/post/417103</link><guid isPermaLink="true">https://multitool.ninja/post/417103</guid><dc:creator><![CDATA[J-sews]]></dc:creator><pubDate>Mon, 06 Sep 2010 16:04:37 GMT</pubDate></item><item><title><![CDATA[Reply to Vic 111mm Backside Phillips is PANTS!!            (that's bad...) on Mon, 06 Sep 2010 11:54:32 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/turnstone" aria-label="Profile: Turnstone">@<bdi>Turnstone</bdi></a> <a href="/post/416969">said</a>:<br />
..... now I know that I don't want to use it for reall heavy use  :ahhh</p>
</blockquote>
<p dir="auto">Or you could say you know to clamp the vice grips in the center of the knife and use them as a lever for those heavy use jobs.   ;)</p>
<p dir="auto">I hope every one realizes that Torque and Phillips never did get along regardless of the driver.</p>
]]></description><link>https://multitool.ninja/post/417014</link><guid isPermaLink="true">https://multitool.ninja/post/417014</guid><dc:creator><![CDATA[ICanFixThat]]></dc:creator><pubDate>Mon, 06 Sep 2010 11:54:32 GMT</pubDate></item><item><title><![CDATA[Reply to Vic 111mm Backside Phillips is PANTS!!            (that's bad...) on Mon, 06 Sep 2010 08:22:01 GMT]]></title><description><![CDATA[<p dir="auto">Thanks for these interesting insights!!! I just love my Trailmaster, and I love having a phillips driver on it. Now I know that I have to be careful with it. I used it once with quite loose screws on a geocache, and I wanted the phillips driver for exactly such applications. But you newer know when you need one and have nothing but your SAK with you... now I know that I don't want to use it for reall heavy use  :ahhh</p>
]]></description><link>https://multitool.ninja/post/416969</link><guid isPermaLink="true">https://multitool.ninja/post/416969</guid><dc:creator><![CDATA[Turnstone]]></dc:creator><pubDate>Mon, 06 Sep 2010 08:22:01 GMT</pubDate></item><item><title><![CDATA[Reply to Vic 111mm Backside Phillips is PANTS!!            (that's bad...) on Mon, 06 Sep 2010 08:12:22 GMT]]></title><description><![CDATA[<p dir="auto">Following your lecture on Engineering (and home cooking) two of my favourite subjects, as it turns out, but that's another matter.</p>
<p dir="auto">It could be that after the mod the distances between tool shank and liner were ever so slightly increased allowing some rotation of the Driver, contributing to (if not the sole cause of) the failure of the pin.</p>
<p dir="auto">I'm not saying it wouldn't have broken anyway, as the nutter with the torque wrench indicates, just that it might have helped.</p>
]]></description><link>https://multitool.ninja/post/416962</link><guid isPermaLink="true">https://multitool.ninja/post/416962</guid><dc:creator><![CDATA[Sea Monster]]></dc:creator><pubDate>Mon, 06 Sep 2010 08:12:22 GMT</pubDate></item><item><title><![CDATA[Reply to Vic 111mm Backside Phillips is PANTS!!            (that's bad...) on Mon, 06 Sep 2010 01:27:11 GMT]]></title><description><![CDATA[<p dir="auto">Well to be honest how strong did you expected it to be? Brass is as soft as it gets, not even mild steel can be peened the way brass pin is, let along compare with heat treated tool steel used in real drivers.</p>
<p dir="auto">MT just aren't made for high stress uses, I remember a guy used his wave bit driver in 90° position to get more torque and shattered the bit holder.</p>
]]></description><link>https://multitool.ninja/post/416896</link><guid isPermaLink="true">https://multitool.ninja/post/416896</guid><dc:creator><![CDATA[jzmtl]]></dc:creator><pubDate>Mon, 06 Sep 2010 01:27:11 GMT</pubDate></item><item><title><![CDATA[Reply to Vic 111mm Backside Phillips is PANTS!!            (that's bad...) on Sun, 05 Sep 2010 22:44:47 GMT]]></title><description><![CDATA[<p dir="auto">Less than 10 Nm.</p>
<p dir="auto">10 Nm is about what an oil drain plug is torqued.  Really not much. This Phillips can't really be trusted to remove anything of a mechanical nature. Trim pieces, electronics screws and maybe some wood screws.  That's about it.</p>
<p dir="auto">Again, not a real Farm EDC tool.  :-\</p>
]]></description><link>https://multitool.ninja/post/416829</link><guid isPermaLink="true">https://multitool.ninja/post/416829</guid><dc:creator><![CDATA[Mr. Whippy]]></dc:creator><pubDate>Sun, 05 Sep 2010 22:44:47 GMT</pubDate></item><item><title><![CDATA[Reply to Vic 111mm Backside Phillips is PANTS!!            (that's bad...) on Sun, 05 Sep 2010 22:34:59 GMT]]></title><description><![CDATA[<p dir="auto">See, I don't see it as a T-driver.  I just see it as a driver hanging off the back of a backspring.</p>
<p dir="auto">I doubt any of it is as strong as the "real deal" but that's the price you pay for compactness and the range of tools it offers.</p>
<p dir="auto">Question is, is 10 NM the same as that of the 111mm SAK?</p>
]]></description><link>https://multitool.ninja/post/416823</link><guid isPermaLink="true">https://multitool.ninja/post/416823</guid><dc:creator><![CDATA[Benner]]></dc:creator><pubDate>Sun, 05 Sep 2010 22:34:59 GMT</pubDate></item><item><title><![CDATA[Reply to Vic 111mm Backside Phillips is PANTS!!            (that's bad...) on Sun, 05 Sep 2010 22:31:14 GMT]]></title><description><![CDATA[<p dir="auto">Science!</p>
<p dir="auto">It's the only way.  I didn't have another 111 mm to use as an experiment so I picked out this 2 layer 91 mm SAK.</p>
<p dir="auto">Here are the testing gear:  NE size socket, SAK, Torque wrench:<br />
<img src="http://i190.photobucket.com/albums/z231/bluebadger88/misc/locksmith/Picture043.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">I placed the SAK in the Vise so that the edge of the tool is free, that way the vise isn't acting as outer liners:<br />
<img src="http://i190.photobucket.com/albums/z231/bluebadger88/misc/locksmith/Picture045.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Long story short, I don't have an inch-pounds torque wrench.  The tool failed at less than 10 Nm!  :o<br />
<img src="http://i190.photobucket.com/albums/z231/bluebadger88/misc/locksmith/Picture057.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">The failure appears to be EXACTLY the same mode as my 111 mm SAK. The Brass was cut through when the liners gave way.<br />
<img src="http://i190.photobucket.com/albums/z231/bluebadger88/misc/locksmith/Picture056.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Conclusion:</p>
<p dir="auto">The backside Victorinox Phillips is in NO WAY to be confused with a T handle driver. Best used for pre-loosened screws. :(</p>
]]></description><link>https://multitool.ninja/post/416821</link><guid isPermaLink="true">https://multitool.ninja/post/416821</guid><dc:creator><![CDATA[Mr. Whippy]]></dc:creator><pubDate>Sun, 05 Sep 2010 22:31:14 GMT</pubDate></item><item><title><![CDATA[Reply to Vic 111mm Backside Phillips is PANTS!!            (that's bad...) on Sun, 05 Sep 2010 22:14:42 GMT]]></title><description><![CDATA[<p dir="auto">As long as the pin is tight, the screwdriver is twisting against the liners and not the pin itself.  As soon as the pin lets go of the bushes holding the knife together, the liners move apart (as in the photo) and the screwdriver is twisting against the pin.  At this point the knife is doomed: the screwdriver is now twisting directly against the thin, soft brass pin, which is likely to fail immediately.</p>
<p dir="auto">The pin head must have failed first, <strong>before</strong> the body of the pin was sheared through.  If the pin head had not failed, I guess the knife would have held together.</p>
<p dir="auto">I can't claim the modified knife was weaker in this respect than an ordinary model, but it's a possibility.</p>
]]></description><link>https://multitool.ninja/post/416811</link><guid isPermaLink="true">https://multitool.ninja/post/416811</guid><dc:creator><![CDATA[tim]]></dc:creator><pubDate>Sun, 05 Sep 2010 22:14:42 GMT</pubDate></item><item><title><![CDATA[Reply to Vic 111mm Backside Phillips is PANTS!!            (that's bad...) on Sun, 05 Sep 2010 21:55:33 GMT]]></title><description><![CDATA[<p dir="auto">It appears to be a shear of the brass though, not the head?</p>
]]></description><link>https://multitool.ninja/post/416797</link><guid isPermaLink="true">https://multitool.ninja/post/416797</guid><dc:creator><![CDATA[Neil]]></dc:creator><pubDate>Sun, 05 Sep 2010 21:55:33 GMT</pubDate></item><item><title><![CDATA[Reply to Vic 111mm Backside Phillips is PANTS!!            (that's bad...) on Sun, 05 Sep 2010 21:01:03 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/benner" aria-label="Profile: Benner">@<bdi>Benner</bdi></a> <a href="/post/416616">said</a>:<br />
What would constitute a failure though?  How much torque <em>should</em> it cope with?</p>
</blockquote>
<p dir="auto">My point is that the first effect of over-stressing the philips is to stretch the brass pin holding the knife together.  Using the bottle-opener as a lever would have a similar effect.  And once the pin-head fails, the liner and pin-shaft will inevitably cede.</p>
<p dir="auto">Now this is a modified knife: the part which is critical to the integrity of the knife against transverse forces -- the pin heads -- is exactly the part which has been  re-worked.  Mr. Whippy's breakage may be due to the fact that it's difficult to re-make the brass pin-heads to the same strength as the original.</p>
<p dir="auto">With brass being as soft as it is, I'm surprised not to see more of this kind of thing.</p>
]]></description><link>https://multitool.ninja/post/416770</link><guid isPermaLink="true">https://multitool.ninja/post/416770</guid><dc:creator><![CDATA[tim]]></dc:creator><pubDate>Sun, 05 Sep 2010 21:01:03 GMT</pubDate></item><item><title><![CDATA[Reply to Vic 111mm Backside Phillips is PANTS!!            (that's bad...) on Sun, 05 Sep 2010 19:50:38 GMT]]></title><description><![CDATA[<p dir="auto">Cor blimey  :o</p>
<p dir="auto">I've never come close to messing up a Vic like that - I think Mr W must have very big butch hands!</p>
<p dir="auto">Whether the tools should be expected to deal with such high torque is a goods question - should we asking someone from Victorinox this?</p>
]]></description><link>https://multitool.ninja/post/416729</link><guid isPermaLink="true">https://multitool.ninja/post/416729</guid><dc:creator><![CDATA[nuphoria]]></dc:creator><pubDate>Sun, 05 Sep 2010 19:50:38 GMT</pubDate></item><item><title><![CDATA[Reply to Vic 111mm Backside Phillips is PANTS!!            (that's bad...) on Sun, 05 Sep 2010 19:48:26 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto">@Mr. Whippy <a href="/post/416721">said</a>:</p>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/benner" aria-label="Profile: Benner">@<bdi>Benner</bdi></a> <a href="/post/416720">said</a>:</p>
<blockquote>
<p dir="auto">But are we to treat that driver the same as a T-driver?  Are we really to expect the same performance out of a 111mm SAK as the "real deal"?  (I'm just stirring it now  :D)</p>
</blockquote>
<p dir="auto">That's wot it looks like... ???</p>
<p dir="auto">Are you proposing a poser Victorinox tool! :o</p>
</blockquote>
<p dir="auto">Not at all (and you know it  <img src="/assets/uploads/smileys/twakfl.gif" alt=":twak:" title="twak" class="forum-smiley emoji" />  :D) but are we really to expect that level of performance out of a SAK?  Surely we need some level of sacrifice for the sheer amount of function we have in such a small package, perhaps ultimate strength is that sacrifice?</p>
]]></description><link>https://multitool.ninja/post/416727</link><guid isPermaLink="true">https://multitool.ninja/post/416727</guid><dc:creator><![CDATA[Benner]]></dc:creator><pubDate>Sun, 05 Sep 2010 19:48:26 GMT</pubDate></item></channel></rss>