<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0"><channel><title><![CDATA[My Wave Mod-a-malgamation]]></title><description><![CDATA[<p dir="auto">So I finally got my pocket clip and lanyard ring in.  Was saving up Swagbucks for a few months to avoid actually paying cash for it, and bought them with Amazon giftcards.  So, as I OBVIOUSLY needed a pair of #10 security torx bits to get them on the Wave proper, I did a couple of other things to it while I had them out.</p>
<p dir="auto">EASY - Took out the built-in lanyard ring.  Now that it's out the hole where it was can be used for the removable lanyard clip.</p>
<p dir="auto">LESS EASY - I stole a play from Evil510's playbook and put in a lock notch at 90 degrees on the bit driver.  It isn't quite as deep as the factory notch, but it works fine.</p>
<p dir="auto">%!*&amp;)$ HARD - I also tried Andreas' mod of putting Victorinox scissors into the outside opening section.  Instead of the file, though, I replaced my raggedy serrated blade.  This one took for EVER, as my drill bits just weren't well suited to drilling the hardened Vic steel.  After a couple of days of tedious drilling, I finally had a hole...that was still just a tad too small.  A little work with a Dremel and a chainsaw sharpening stone fixed that quickly though.  Unlike Andreas, I decided not to mangle the blade lock mechanism.  As such, I put in a lock notch on the bottom of the scissors, so the scissors do lock open.  I haven't put in a detente dent yet though, as it doesn't really seem to be needed.  The only downside of this mod so far is that the lock bar gets in the way of opening about half way and has to be depressed to open the scissors fully.  Not <em>that</em> bad, but just a tad annoying.  I also somehow managed to mangle the scissors a bit when I had them locked into my bench vice.  It has taken some toothpaste in the joints and lots of opening and closing to get them opening smoothly again.</p>
<p dir="auto">I don't know if the scissors will stay yet.  After I get proper tools to sharpen a serrated blade it might migrate back in.  It is nice to have some on the outside though.  In the mean time, I'd like to figure out something to replace the internal scissors with.  And it wouldn't kill me to get rid of the micro bit driver either (or the can opener for that matter.)  Perhaps some kind of awl?  A Blast Phillips to compliment the fixed flat driver?</p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/23354_DSCF2252.JPG" alt="DSCF2252.JPG" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/23356_DSCF2254.JPG" alt="DSCF2254.JPG" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/23358_DSCF2257.JPG" alt="DSCF2257.JPG" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/23360_DSCF2258.JPG" alt="DSCF2258.JPG" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/topic/22531/my-wave-mod-a-malgamation</link><generator>RSS for Node</generator><lastBuildDate>Wed, 18 Nov 2026 23:26:19 GMT</lastBuildDate><atom:link href="https://multitool.ninja/topic/22531.rss" rel="self" type="application/rss+xml"/><pubDate>Sun, 05 Sep 2010 07:37:55 GMT</pubDate><ttl>60</ttl><item><title><![CDATA[Reply to My Wave Mod-a-malgamation on Thu, 30 Sep 2010 08:11:17 GMT]]></title><description><![CDATA[<p dir="auto">They just want to charge you a bunch of money for special bits and adapters</p>
]]></description><link>https://multitool.ninja/post/426242</link><guid isPermaLink="true">https://multitool.ninja/post/426242</guid><dc:creator><![CDATA[Andreas]]></dc:creator><pubDate>Thu, 30 Sep 2010 08:11:17 GMT</pubDate></item><item><title><![CDATA[Reply to My Wave Mod-a-malgamation on Thu, 30 Sep 2010 03:37:57 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/slackone" aria-label="Profile: SlackOne">@<bdi>SlackOne</bdi></a> <a href="/post/426206">said</a>:<br />
It's getting there :)  Not like anything is inherently wrong with the Wave...it's just that it could be better for <em>me</em>!</p>
<p dir="auto">Frankly, I wish they had just skipped the laughable "combo tool" and the flat bits and just put a 1/4" socket in one of the Wave's handles like the one in the Crunch.  I've never really liked the flat bits, and continue to find them something of a nuisance, but I seem to be in the minority on that one.</p>
</blockquote>
<p dir="auto">No, you are not a minority. Actually think a true 1/4" bit roll-out would be a clever idea! Wished a Juice could be adapted for a similar critter (flatbit maybe). Not sure what Leatherman has with all the flatheads - priers maybe?</p>
]]></description><link>https://multitool.ninja/post/426208</link><guid isPermaLink="true">https://multitool.ninja/post/426208</guid><dc:creator><![CDATA[Outback in Idaho]]></dc:creator><pubDate>Thu, 30 Sep 2010 03:37:57 GMT</pubDate></item><item><title><![CDATA[Reply to My Wave Mod-a-malgamation on Thu, 30 Sep 2010 03:08:27 GMT]]></title><description><![CDATA[<p dir="auto">It's getting there :)  Not like anything is inherently wrong with the Wave...it's just that it could be better for <em>me</em>!</p>
<p dir="auto">Frankly, I wish they had just skipped the laughable "combo tool" and the flat bits and just put a 1/4" socket in one of the Wave's handles like the one in the Crunch.  I've never really liked the flat bits, and continue to find them something of a nuisance, but I seem to be in the minority on that one.</p>
]]></description><link>https://multitool.ninja/post/426206</link><guid isPermaLink="true">https://multitool.ninja/post/426206</guid><dc:creator><![CDATA[SlackOne]]></dc:creator><pubDate>Thu, 30 Sep 2010 03:08:27 GMT</pubDate></item><item><title><![CDATA[Reply to My Wave Mod-a-malgamation on Wed, 29 Sep 2010 20:35:27 GMT]]></title><description><![CDATA[<p dir="auto">Good work... I think outside opening scissors are a damn fine idea  <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /></p>
<p dir="auto">It's nice when you get an end product you're happy with (well, nearly in your case)  :D</p>
]]></description><link>https://multitool.ninja/post/426089</link><guid isPermaLink="true">https://multitool.ninja/post/426089</guid><dc:creator><![CDATA[nuphoria]]></dc:creator><pubDate>Wed, 29 Sep 2010 20:35:27 GMT</pubDate></item><item><title><![CDATA[Reply to My Wave Mod-a-malgamation on Wed, 29 Sep 2010 19:38:59 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/slackone" aria-label="Profile: SlackOne">@<bdi>SlackOne</bdi></a> <a href="/post/426045">said</a>:<br />
I <em>will</em> end up with a Juice S2 or a Freestyle.  I'm up in the air at the moment which would suit me better.  The Freestyle would better compliment the custom SAK I'm putting together, but the S2 is just such a sweetheart.  Bah.</p>
<p dir="auto">In other news, I just flattened the shank to a Torx 25 driver to fit into my Wave's bit holder.  Doesn't take long, but doing it with a vice, a rotary sanding drum, and the Mk.1.0 Eyeball meant for a bit of try it-grind it-try it action.  Why a T-25?  Well, I want to do a long Phillips but I have a bunch of T-25 power bits lying around and wanted to get some practice in first.  I use Torx woodscrews, and every box has another bit in it...why do I need a half dozen? :P</p>
</blockquote>
<p dir="auto">Sale on T-25's today?  :D</p>
]]></description><link>https://multitool.ninja/post/426050</link><guid isPermaLink="true">https://multitool.ninja/post/426050</guid><dc:creator><![CDATA[Outback in Idaho]]></dc:creator><pubDate>Wed, 29 Sep 2010 19:38:59 GMT</pubDate></item><item><title><![CDATA[Reply to My Wave Mod-a-malgamation on Wed, 29 Sep 2010 19:20:59 GMT]]></title><description><![CDATA[<p dir="auto">I <em>will</em> end up with a Juice S2 or a Freestyle.  I'm up in the air at the moment which would suit me better.  The Freestyle would better compliment the custom SAK I'm putting together, but the S2 is just such a sweetheart.  Bah.</p>
<p dir="auto">In other news, I just flattened the shank to a Torx 25 driver to fit into my Wave's bit holder.  Doesn't take long, but doing it with a vice, a rotary sanding drum, and the Mk.1.0 Eyeball meant for a bit of try it-grind it-try it action.  Why a T-25?  Well, I want to do a long Phillips but I have a bunch of T-25 power bits lying around and wanted to get some practice in first.  I use Torx woodscrews, and every box has another bit in it...why do I need a half dozen? :P</p>
]]></description><link>https://multitool.ninja/post/426045</link><guid isPermaLink="true">https://multitool.ninja/post/426045</guid><dc:creator><![CDATA[SlackOne]]></dc:creator><pubDate>Wed, 29 Sep 2010 19:20:59 GMT</pubDate></item><item><title><![CDATA[Reply to My Wave Mod-a-malgamation on Wed, 15 Sep 2010 21:42:35 GMT]]></title><description><![CDATA[<p dir="auto">I've been trying to figure out what to do further with my Wave as well. TBH it's become seriously redundant since I got the PS4, the latter does most the things I used the Wave for and more. Only useful tool I find on the inside of the Wave is the bit driver but I don't have anything to put in there more useful than the other tools that are already there. Frankly I want a Juice S2  :ahhh but that one would be redundant as well</p>
]]></description><link>https://multitool.ninja/post/420567</link><guid isPermaLink="true">https://multitool.ninja/post/420567</guid><dc:creator><![CDATA[Andreas]]></dc:creator><pubDate>Wed, 15 Sep 2010 21:42:35 GMT</pubDate></item><item><title><![CDATA[Reply to My Wave Mod-a-malgamation on Wed, 15 Sep 2010 21:04:36 GMT]]></title><description><![CDATA[<p dir="auto">Not too keen on the mini bit driver - those should be on mini-tools like the Squirts. To think a guy actually broke one in his teeth thinking it was a steel toothpick. Yeowch!</p>
<p dir="auto">♥ the Can/Bottle Opener/Wire Stripper. Some times I wonder if the mini-bit driver was used more for "filler" than anything else. Rather of had a (<img src="/assets/uploads/smileys/poke2.gif" alt=":pok:" title="pok" class="forum-smiley emoji" />) <em>fold out</em> carabiner there!  <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/420548</link><guid isPermaLink="true">https://multitool.ninja/post/420548</guid><dc:creator><![CDATA[Outback in Idaho]]></dc:creator><pubDate>Wed, 15 Sep 2010 21:04:36 GMT</pubDate></item><item><title><![CDATA[Reply to My Wave Mod-a-malgamation on Wed, 15 Sep 2010 20:43:48 GMT]]></title><description><![CDATA[<p dir="auto">Thanks Xelkos.  You'll find that the more you look around on this site, the more fab ideas you find lurking in the back corridors.  My task now is to try and find something <em>original</em> to do with the Wave :)  I have an idear, but I'll have to back burner it for a while since I'm slowly but surely bashing out the tile floor in my bathroom :/</p>
<p dir="auto">In the meantime, that mini driver and can opener just gots to GO.  Think I'll post in the wanted tools for a couple of bits from a Charge, if anyone has any spares floating around...</p>
]]></description><link>https://multitool.ninja/post/420540</link><guid isPermaLink="true">https://multitool.ninja/post/420540</guid><dc:creator><![CDATA[SlackOne]]></dc:creator><pubDate>Wed, 15 Sep 2010 20:43:48 GMT</pubDate></item><item><title><![CDATA[Reply to My Wave Mod-a-malgamation on Wed, 15 Sep 2010 18:59:34 GMT]]></title><description><![CDATA[<p dir="auto">Off you go then  <img src="/assets/uploads/smileys/poke2.gif" alt=":pok:" title="pok" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/420485</link><guid isPermaLink="true">https://multitool.ninja/post/420485</guid><dc:creator><![CDATA[Benner]]></dc:creator><pubDate>Wed, 15 Sep 2010 18:59:34 GMT</pubDate></item><item><title><![CDATA[Reply to My Wave Mod-a-malgamation on Wed, 15 Sep 2010 18:57:04 GMT]]></title><description><![CDATA[<p dir="auto"><img src="http://i850.photobucket.com/albums/ab66/Xelkos/Xemoticon/bump.gif" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Amazing mods! 90° lock?? Now this I have to see.</p>
<p dir="auto">Starting to wish I would of found MTO &lt;u&gt;before&lt;/u&gt; ordering a Surge, could of had it all in Wave size!<br />
I ♥ my Surge though, projects seem to go much easier. Screws even cringe at the sight of a <strong>BIG BLACK OXIDE SURGE</strong>!</p>
<p dir="auto">Now we need a <strong>sticky</strong> that links all the cool mods into one <em>[u]Easy To Find</em> directory, by maker and/or tool. <em>Oh waiter!</em></p>
]]></description><link>https://multitool.ninja/post/420484</link><guid isPermaLink="true">https://multitool.ninja/post/420484</guid><dc:creator><![CDATA[Outback in Idaho]]></dc:creator><pubDate>Wed, 15 Sep 2010 18:57:04 GMT</pubDate></item><item><title><![CDATA[Reply to My Wave Mod-a-malgamation on Tue, 14 Sep 2010 11:27:57 GMT]]></title><description><![CDATA[<p dir="auto">Yeah, I'd love a Sawzall of any flavor.  The battery power ones do look nice...I'd like to convert over to battery for a number of things, like our drill.  I tend to tie myself up in the cords, especially when I'm on a ladder  :-[</p>
<p dir="auto">Tried the saw out on live wood, trimming a few limbs to stick up a baby swing for lil' Slack Two.  The blade whizzed through 1 1/2" limbs quite nicely, on a tree that's given my stock Wave saw fits.  No binding or bending at all, just lost a little paint on the teeth.</p>
]]></description><link>https://multitool.ninja/post/420016</link><guid isPermaLink="true">https://multitool.ninja/post/420016</guid><dc:creator><![CDATA[SlackOne]]></dc:creator><pubDate>Tue, 14 Sep 2010 11:27:57 GMT</pubDate></item><item><title><![CDATA[Reply to My Wave Mod-a-malgamation on Sun, 12 Sep 2010 15:52:26 GMT]]></title><description><![CDATA[<p dir="auto">Sawzall's are damn handy to have around for sure. <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /> If you get the chance, grab one of the 18volt battery ones. For the occasional sawzall user, the battery charge lasts plenty long enough, and it is well worth it because of how convenient it is to use. :)</p>
]]></description><link>https://multitool.ninja/post/419314</link><guid isPermaLink="true">https://multitool.ninja/post/419314</guid><dc:creator><![CDATA[J-sews]]></dc:creator><pubDate>Sun, 12 Sep 2010 15:52:26 GMT</pubDate></item><item><title><![CDATA[Reply to My Wave Mod-a-malgamation on Sun, 12 Sep 2010 15:37:40 GMT]]></title><description><![CDATA[<p dir="auto">So far, no.  But I've mostly tested it on stuff like scrap trim and some 3/4" flooring plywood.  I doubt it will bind too much since it's not double cut...I don't apply much pressure at all on the push, only on the pull.  The real test will be putting it to some living green wood.  Trimming limbs always seems to bind my regular Wave saw, we'll see what this thing does :)</p>
<p dir="auto">Oh...and I only got one this long because it was as short as I could get without buying a whole pack of the things.  I don't have a Sawzall, so I'd have ended up with a bunch of blades if this wasn't my thing.</p>
<p dir="auto">Then again...might have been a good (weak) excuse to get a Sawzall :)</p>
]]></description><link>https://multitool.ninja/post/419308</link><guid isPermaLink="true">https://multitool.ninja/post/419308</guid><dc:creator><![CDATA[SlackOne]]></dc:creator><pubDate>Sun, 12 Sep 2010 15:37:40 GMT</pubDate></item><item><title><![CDATA[Reply to My Wave Mod-a-malgamation on Sun, 12 Sep 2010 13:44:35 GMT]]></title><description><![CDATA[<p dir="auto">That's a long saw blade! :D I never tried one that long. Does it want to bend/bind up on you during use?</p>
]]></description><link>https://multitool.ninja/post/419286</link><guid isPermaLink="true">https://multitool.ninja/post/419286</guid><dc:creator><![CDATA[J-sews]]></dc:creator><pubDate>Sun, 12 Sep 2010 13:44:35 GMT</pubDate></item><item><title><![CDATA[Reply to My Wave Mod-a-malgamation on Thu, 09 Sep 2010 18:41:49 GMT]]></title><description><![CDATA[<p dir="auto">Yup tried to give Bob/J-Sews props a couple posts back.  Now I'm up to Bob, Evil, and Andreas as the sources for the mod.  Removing the lanyard in order to mount both the clip and the lanyard simultaneously was actually from <em>your</em> Kwakster-modded Charge :)</p>
]]></description><link>https://multitool.ninja/post/418278</link><guid isPermaLink="true">https://multitool.ninja/post/418278</guid><dc:creator><![CDATA[SlackOne]]></dc:creator><pubDate>Thu, 09 Sep 2010 18:41:49 GMT</pubDate></item><item><title><![CDATA[Reply to My Wave Mod-a-malgamation on Thu, 09 Sep 2010 18:29:23 GMT]]></title><description><![CDATA[<p dir="auto">That be a Bob mod.  <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/418269</link><guid isPermaLink="true">https://multitool.ninja/post/418269</guid><dc:creator><![CDATA[Benner]]></dc:creator><pubDate>Thu, 09 Sep 2010 18:29:23 GMT</pubDate></item><item><title><![CDATA[Reply to My Wave Mod-a-malgamation on Thu, 09 Sep 2010 18:17:24 GMT]]></title><description><![CDATA[<p dir="auto">Erm...I have no idea where that post where I quoted myself came from.   <img src="/assets/uploads/smileys/thinking.gif" alt=":think:" title="Thinking" class="forum-smiley emoji" /></p>
<p dir="auto">Anyways, here are pics.</p>
<p dir="auto">&lt;a href="<a href="http://www.flickr.com/photos/bekkiandquanah/4974117539/" rel="nofollow ugc">http://www.flickr.com/photos/bekkiandquanah/4974117539/</a>" target="_blank" rel="noopener noreferrer"&gt;&lt;img src="<a href="http://farm5.static.flickr.com/4154/4974117539_7dc5a5ccb0.jpg" rel="nofollow ugc">http://farm5.static.flickr.com/4154/4974117539_7dc5a5ccb0.jpg</a>" alt="banner" style="max-width: 100%; height: auto;" /&gt;&lt;/a&gt;<br />
<a href="http://www.flickr.com/photos/bekkiandquanah/4974117539/" rel="nofollow ugc">Wave detachable saw</a> by <a href="http://www.flickr.com/people/bekkiandquanah/" rel="nofollow ugc">Bekki And Quanah</a>, on Flickr</p>
<p dir="auto">&lt;a href="<a href="http://www.flickr.com/photos/bekkiandquanah/4974117329/" rel="nofollow ugc">http://www.flickr.com/photos/bekkiandquanah/4974117329/</a>" target="_blank" rel="noopener noreferrer"&gt;&lt;img src="<a href="http://farm5.static.flickr.com/4085/4974117329_15afe6f301.jpg" rel="nofollow ugc">http://farm5.static.flickr.com/4085/4974117329_15afe6f301.jpg</a>" alt="banner" style="max-width: 100%; height: auto;" /&gt;&lt;/a&gt;<br />
<a href="http://www.flickr.com/photos/bekkiandquanah/4974117329/" rel="nofollow ugc">Wave detachable saw</a> by <a href="http://www.flickr.com/people/bekkiandquanah/" rel="nofollow ugc">Bekki And Quanah</a>, on Flickr</p>
<p dir="auto">&lt;a href="<a href="http://www.flickr.com/photos/bekkiandquanah/4974117167/" rel="nofollow ugc">http://www.flickr.com/photos/bekkiandquanah/4974117167/</a>" target="_blank" rel="noopener noreferrer"&gt;&lt;img src="<a href="http://farm5.static.flickr.com/4086/4974117167_7ee8d43e9c.jpg" rel="nofollow ugc">http://farm5.static.flickr.com/4086/4974117167_7ee8d43e9c.jpg</a>" alt="banner" style="max-width: 100%; height: auto;" /&gt;&lt;/a&gt;<br />
<a href="http://www.flickr.com/photos/bekkiandquanah/4974117167/" rel="nofollow ugc">Wave detachable saw</a> by <a href="http://www.flickr.com/people/bekkiandquanah/" rel="nofollow ugc">Bekki And Quanah</a>, on Flickr</p>
<p dir="auto">Works pretty well now.  Later when I have another couple of spare bucks, I'll do a metal or grit saw.  I'm going to leave it full length for now as it'll most likely end up in the man bag and not on my person most of the time, as I don't holster-carry my Wave.</p>
]]></description><link>https://multitool.ninja/post/418258</link><guid isPermaLink="true">https://multitool.ninja/post/418258</guid><dc:creator><![CDATA[SlackOne]]></dc:creator><pubDate>Thu, 09 Sep 2010 18:17:24 GMT</pubDate></item><item><title><![CDATA[Reply to My Wave Mod-a-malgamation on Thu, 09 Sep 2010 14:18:48 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/slackone" aria-label="Profile: SlackOne">@<bdi>SlackOne</bdi></a> <a href="/post/418179">said</a>:<br />
In the theme of amalgamation, I'm also modding a Sawzall blade to fit into the Wave's lanyard-loop-holder.  The shaping is done (which is quick) and now I need to do a bit of tweaking (which is less quick.)  I've used it to saw through some trim and scrap wood lying about, and it is a quicker cut than the Wave's normal saw, and seems to bind less.  Harder to get started in the material though, as its teeth are wider.  Almost worth it to start the cut with the small saw and move up to this one.  I also did the cuts "upside down" of the J-Sews original.  This was so that the Wave could be opened up to give something to pull on instead of having to death-fist the body of the tool.  Sawzall blades cut on the pull, which is why I did that.  If I remove the tooth closest to the Wave, it'll work with the tool closed as well.</p>
<p dir="auto">Getting the shape of the lanyard attach was no biggie...traced on and Dremeled in a few minutes.  The rub is that the Irwin blade I'm using is apparently a bit thicker than the ones J-Sews was using, or the Charge's lanyard hole is different than the Wave's.  The blade is juuuuust thick enough to bind up on the built-in "washer" molded into the Wave's endcaps, so I'm having to bevel the u-notch on the "outside" so it will get past that.  I did that, but had to deepen the U a bit, and need to redo it.  Pics when I get it working 100%.</p>
</blockquote>
]]></description><link>https://multitool.ninja/post/418180</link><guid isPermaLink="true">https://multitool.ninja/post/418180</guid><dc:creator><![CDATA[SlackOne]]></dc:creator><pubDate>Thu, 09 Sep 2010 14:18:48 GMT</pubDate></item><item><title><![CDATA[Reply to My Wave Mod-a-malgamation on Thu, 09 Sep 2010 14:16:49 GMT]]></title><description><![CDATA[<p dir="auto">In the theme of amalgamation, I'm also modding a Sawzall blade to fit into the Wave's lanyard-loop-holder.  The shaping is done (which is quick) and now I need to do a bit of tweaking (which is less quick.)  I've used it to saw through some trim and scrap wood lying about, and it is a quicker cut than the Wave's normal saw, and seems to bind less.  Harder to get started in the material though, as its teeth are wider.  Almost worth it to start the cut with the small saw and move up to this one.  I also did the cuts "upside down" of the J-Sews original.  This was so that the Wave could be opened up to give something to pull on instead of having to death-fist the body of the tool.  Sawzall blades cut on the pull, which is why I did that.</p>
<p dir="auto">Getting the shape of the lanyard attach was no biggie...traced on and Dremeled in a few minutes.  The rub is that the Irwin blade I'm using is apparently a bit thicker than the ones J-Sews was using, or the Charge's lanyard hole is different than the Wave's.  The blade is juuuuust thick enough to bind up on the built-in "washer" molded into the Wave's endcaps, so I'm having to bevel the u-notch on the "outside" so it will get past that.  I did that, but had to deepen the U a bit, and need to redo it.  Pics when I get it working 100%.</p>
]]></description><link>https://multitool.ninja/post/418179</link><guid isPermaLink="true">https://multitool.ninja/post/418179</guid><dc:creator><![CDATA[SlackOne]]></dc:creator><pubDate>Thu, 09 Sep 2010 14:16:49 GMT</pubDate></item><item><title><![CDATA[Reply to My Wave Mod-a-malgamation on Sun, 05 Sep 2010 18:16:50 GMT]]></title><description><![CDATA[<p dir="auto"><em>Great going there on the mods SlackOne  <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /></em></p>
<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/andreas" aria-label="Profile: Andreas">@<bdi>Andreas</bdi></a> <a href="/post/416507">said</a>:<br />
Indeed, I guess I should have patented it  :D<br />
It's such an easy (well I guess that's relative, it took me forever too but it's still not like evil510s mods) mod that don't require a big investment so it's nice to see people do it</p>
</blockquote>
<p dir="auto">*Yes as mentioned before, your version is a more viable and feasible option for the masses since the scissors are readily available.  My scissors were built from the ground up and basically one of a kind, until I create more of them. The investment in materials was minimal in comparison to the time invested.....</p>
<p dir="auto">~ evil ~*</p>
]]></description><link>https://multitool.ninja/post/416680</link><guid isPermaLink="true">https://multitool.ninja/post/416680</guid><dc:creator><![CDATA[evil510]]></dc:creator><pubDate>Sun, 05 Sep 2010 18:16:50 GMT</pubDate></item><item><title><![CDATA[Reply to My Wave Mod-a-malgamation on Sun, 05 Sep 2010 17:42:49 GMT]]></title><description><![CDATA[<p dir="auto">Those scissors really do look as if they fit there perfectly :)</p>
]]></description><link>https://multitool.ninja/post/416664</link><guid isPermaLink="true">https://multitool.ninja/post/416664</guid><dc:creator><![CDATA[J-sews]]></dc:creator><pubDate>Sun, 05 Sep 2010 17:42:49 GMT</pubDate></item><item><title><![CDATA[Reply to My Wave Mod-a-malgamation on Sun, 05 Sep 2010 14:21:54 GMT]]></title><description><![CDATA[<p dir="auto">It was kind of a no-brainer for me to try.  I'd bought a couple of SAKs exclusively to mod, and had modified one of the scissor back springs to work with the Vic saw, leaving me with a pair of scissors just floating around.  It's too bad that adding in other SAK pieces (like the combo tool) would require some welding in order to get them to lock up.</p>
]]></description><link>https://multitool.ninja/post/416514</link><guid isPermaLink="true">https://multitool.ninja/post/416514</guid><dc:creator><![CDATA[SlackOne]]></dc:creator><pubDate>Sun, 05 Sep 2010 14:21:54 GMT</pubDate></item><item><title><![CDATA[Reply to My Wave Mod-a-malgamation on Sun, 05 Sep 2010 14:12:56 GMT]]></title><description><![CDATA[<p dir="auto">Indeed, I guess I should have patented it  :D<br />
It's such an easy (well I guess that's relative, it took me forever too but it's still not like evil510s mods) mod that don't require a big investment so it's nice to see people do it</p>
]]></description><link>https://multitool.ninja/post/416507</link><guid isPermaLink="true">https://multitool.ninja/post/416507</guid><dc:creator><![CDATA[Andreas]]></dc:creator><pubDate>Sun, 05 Sep 2010 14:12:56 GMT</pubDate></item></channel></rss>