<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0"><channel><title><![CDATA[Kender's Collection Thus Far]]></title><description><![CDATA[<p dir="auto">I am creating this thread to document my collection as it grows.  As I start this, I own eleven Leatherman tools, most of which were purchased in the last three months.</p>
<p dir="auto">My reason for posting this here and not just keeping it to myself is so that the information (particularly on older Leatherman tools, especially the PST) may be of use to someone else.  Compare this to the "PST Chronology Project" thread.  Essentially, it's a public repository for information that I collect as I collect tools.</p>
<p dir="auto">At this date, Jan. 12, 2011, I have eleven Leatherman tools, listed below.  The dates refer to date of manufacture.</p>
<p dir="auto">PST (Circa 1985-1989; Japan)<br />
PST (Oct/Dec 1994; Marlboro Country Store)<br />
PST (Circa Late '80s/early '90s)<br />
PST II (Jan 1996)<br />
Super Tool (Nov/Dec 1995)<br />
Micra (Oct 2009)<br />
Wave (Sept/Oct 2010)<br />
Juice C2 (Red) (Sept 2001)<br />
Squirt P4 (Blue) (Aug 2007)<br />
Squirt P4 (Blue) (Jun 2002)<br />
Style CS (Sept 2010)</p>
<p dir="auto">I purchased or received all of the above used except for the Marlboro Country Store PST, the Micra and the Wave.</p>
<p dir="auto">The information in-depth is below:<br />
**<br />
PST - Circa 1985-1989; Japan**</p>
<p dir="auto">Acquisition:  December 2010; purchased from a man off of Craigslist.</p>
<p dir="auto">This PST is a Japanese-made version that was manufactured in Japan.  For four years from 1985-1989, Leatherman had such demand for its PST tool that, to accommodate growing demands, additional tools were manufactured in Japan.  This particular model was likely manufactured towards the end of this production run, as characterized by the "US PAT" line being replaced by the "US REG'D" line.</p>
<p dir="auto">The knife blade may have been replaced at some point, due to the fact that it is not stamped "LEATHERMAN JAPAN", but only "LEATHERMAN".</p>
<p dir="auto">Logo:  Large "LEATHERMAN" "®" small "TOOL"<br />
Below Logo/Trademark:  "US REG'D TM 1325473"<br />
Scale Joints:  Rivets; lanyard attachment<br />
Ruler:  Inches only<br />
Pliers:  Stamped "LEATHERMAN"; small joint<br />
Knife Blade:  Drop point; stamped "LEATHERMAN"<br />
Awl:  Milled<br />
Can Opener:  Old style<br />
Screwdriver Pivot:  In<br />
Phillips Screwdriver:  No marking<br />
Date Stamp:  None<br />
Thumbnail Slots:  Large<br />
File:  Orientation reversed; no "LEATHERMAN" stamp</p>
<p dir="auto">Additional notes:<br />
The file on this PST is reversed in orientation compared to the files on my American-made PSTs and in addition is also not stamped "LEATHERMAN" as the others are.</p>
<p dir="auto"><strong>PST - October/December 1994; USA; Marlboro Country Store</strong></p>
<p dir="auto">Acquisition:  Given to me by my father.  Not sure what year, probably between 1995 and 1997.</p>
<p dir="auto">USA PST model ordered from the Marlboro Country Store catalog which bears the logo from same.</p>
<p dir="auto">Logo:  Small "LEATHERMAN® TOOL"<br />
Below Logo/Trademark:  "US REG TM 1325473"/"PORTLAND OR"<br />
Scale Joints:  Knurled screws; lanyard attachment<br />
Ruler:  Inches/centimeters<br />
Pliers:  Stamped "LEATHERMAN USA"; small joint<br />
Knife Blade:  "Saber" style; stamped "LEATHERMAN USA"<br />
Awl:  Ground<br />
Can Opener:  New style<br />
Screwdriver Pivot:  In<br />
Phillips Screwdriver:  Stamped "F"<br />
Date Stamp:  1094/1294<br />
Thumbnail Slots:  Small<br />
File:  Stamped "LEATHERMAN"</p>
<p dir="auto">Additional notes:<br />
The Marlboro Country Store logo is engraved on the side reverse of the Leatherman logo.  This is also my first Leatherman, and the earliest date-coded PST that I own.</p>
<p dir="auto"><strong>PST - Circa Late '80s/early '90s; USA</strong></p>
<p dir="auto">Acquisition:  Purchased from a pawn shop, Portland, OR, in 2007/2008</p>
<p dir="auto">This PST is a USA model manufactued towards the end of the 1980s, possibly in the early 1990s.</p>
<p dir="auto">Logo:  Small "LEATHERMAN® TOOL"<br />
Below Logo/Trademark:  "US REG TM 1325473"/"PORTLAND OR"<br />
Scale Joints:  Knurled screws; lanyard attachment<br />
Ruler:  Inches/centimeters<br />
Pliers:  Stamped "LEATHERMAN USA"; small joint<br />
Knife Blade:  "Saber" style; stamped "LEATHERMAN USA"<br />
Awl:  Ground<br />
Can Opener:  New style<br />
Screwdriver Pivot:  In<br />
Phillips Screwdriver:  Stamped "2"<br />
Date Stamp:  None<br />
Thumbnail Slots:  Small<br />
File:  Stamped "LEATHERMAN"</p>
<p dir="auto">Additional notes:<br />
This is the first instance I have seen of the stamping on the Philips screwdriver.</p>
<p dir="auto"><strong>PST II - January 1996</strong></p>
<p dir="auto">Acquisition:  Purchased from eBay, January 2011</p>
<p dir="auto">This is an early PST II.</p>
<p dir="auto">Logo:  Small "LEATHERMAN® TOOL" (Both sides of tool)<br />
Below Logo/Trademark:  "US REG TM 1325473"/"PORTLAND OR" (Both sides of tool)<br />
Scale Joints:  Knurled screws; lanyard attachment<br />
Ruler:  Inches/centimeters<br />
Pliers:  Stamped "LEATHERMAN USA"; small joint<br />
Knife Blade:  "Saber" style; half-serrated; stamped "LEATHERMAN USA"<br />
Can Opener:  New style<br />
Screwdriver Pivot:  In<br />
Phillips Screwdriver:  Stamped "J"<br />
Date Stamp:  0196<br />
Thumbnail Slots:  Small<br />
File:  Stamped "LEATHERMAN"; fishhook groove</p>
<p dir="auto">Additional notes:<br />
I believe that this is an early PST II, although it does not bear the PST II logo that I've seen on others.</p>
<p dir="auto"><strong>Super Tool - November/December 1995</strong></p>
<p dir="auto">Acquisition:  Purchased from a man off of Craigslist in December 2010.</p>
<p dir="auto">Logo:  Small "LEATHERMAN® SUPER TOOL"<br />
Below Logo/Trademark:  "PAT PEND"/"PORTLAND OR"<br />
Scale Joints:  Knurled screws; lanyard attachment<br />
Ruler:  Inches/centimeters<br />
Pliers:  Stamped "LEATHERMAN USA"; Large joint<br />
Knife Blade:  Clip point; stamped "LEATHERMAN USA"<br />
Serrated Blade:  Stamped "LEATHERMAN USA"<br />
Awl:  Ground<br />
Can Opener:  New style<br />
Screwdriver Pivot:  In<br />
Phillips Screwdriver:  No stamp<br />
Date Stamp:  1195/1295<br />
Thumbnail Slots:  Small<br />
File:  Stamped "LEATHERMAN"</p>
<p dir="auto">Additional notes:<br />
As far as I know, this Super Tool is unremarkable.</p>
<p dir="auto"><strong>Micra - October 2009</strong></p>
<p dir="auto">Acquisition:  Purchased new from Sears in December 2010.</p>
<p dir="auto">Markings:  "For Phillips" on the Phillips screwdriver; "LEATHERMAN TOOL" on scissors joint; "LEATHERMAN" on the knife tang, "LEATHERMAN" on the tang of the reverse of the file.</p>
<p dir="auto">Notes:  I believe this to be an unremarkable Micra.</p>
<p dir="auto">I have also noticed the absence of any sort of "USA" marking on the tool.</p>
<p dir="auto"><strong>Wave - September/October 2010</strong></p>
<p dir="auto">Acquisition:  Purchased new from Fred Meyer in November 2010.</p>
<p dir="auto">Markings:  Under the large bit driver are the markings "12" and "1D".  This may hold meaning similar to the stamps found on the base of the Phillips screwdrivers on some PSTs.  The small bit driver has the markings "12" and "2D".  It's possible that these markings indicate the bit drivers' position.  Why is unknown.</p>
<p dir="auto">Notes:  I believe this to be an unremarkable Wave, although any interesting markings have been noted.</p>
<p dir="auto">I have also noted the lack of any sort of "USA" marking on any portion of the tool itself.</p>
<p dir="auto"><strong>Juice C2 (Red) - September 2001</strong></p>
<p dir="auto">Acquisition:  Purchased off of eBay, December/January 2010/2011.</p>
<p dir="auto">Markings:  The Phillips screwdriver bears the mark "1F", similar to the PST Phillips driver markings.  The base of the pliers also bear markings on both sides just above where they connect to the scales:  With the tool open and the Leatherman logo facing the viewer, "1" is on the left plier, and "H" on the right.  On the other side, "1" and "D".  Meaning is currently unknown.</p>
<p dir="auto">Notes:  I believe this to be an unremarkable Juice C2, although any interesting markings have been noted.</p>
<p dir="auto">Unlike any other Leatherman I have seen, the knife blade on the Juice does not have "LEATHERMAN" stamped on it.<br />
**<br />
Squirt P4 (Glacier Blue) - August 2007**</p>
<p dir="auto">Acquisition:  Purchased from eBay, December 2010.</p>
<p dir="auto">Notes:  I believe this to be an unremarkable Squirt P4.</p>
<p dir="auto">There are no unusual markings, though it is worth noting that the file is not stamped "LEATHERMAN" which is seen in most other tools I have seen.</p>
<p dir="auto"><strong>Squirt P4 (Glacier Blue) - June 2002</strong></p>
<p dir="auto">Acquisition:  Purchased from a flea market in Gresham, OR ($4)</p>
<p dir="auto">Notes:  I believe this to be an unremarkable Squirt P4.</p>
<p dir="auto">There are no unusual markings, though it is worth noting that the file is not stamped "LEATHERMAN" which is seen in most other tools I have seen.<br />
**<br />
Style CS - September 2010**</p>
<p dir="auto">Acquisition:  Purchased from Dick's Sporting Goods, November 2010.</p>
<p dir="auto">Notes:  I believe this to be an unremarkable Stlye CS.</p>
<p dir="auto">There are no unusual markings.  It may be worth noting that the file does not bear the "LEATHERMAN" stamp, as is common, but the file on the Style CS is very narrow which may explain its omission.</p>
<hr />
<p dir="auto">Please feel free to comment as you like.  I have a few questions that I am particularly interested in having answered:</p>
<p dir="auto">On all but my oldest PST/PST II, the Phillips screwdriver bears a letter or number mark.  The same is true for the Juice, and possibly related markings appear on the scales underneath both bit drivers on the Wave.  What do these markings indicate?</p>
<p dir="auto">Markings very similar to the screwdriver markings appear on the bottom of the pliers on the Juice.  What do these markings indicate?</p>
<p dir="auto">Why does the Juice C2 not have "Leatherman" stamped on the knife blade?</p>
]]></description><link>https://multitool.ninja/topic/25241/kenders-collection-thus-far</link><generator>RSS for Node</generator><lastBuildDate>Wed, 18 Nov 2026 18:57:47 GMT</lastBuildDate><atom:link href="https://multitool.ninja/topic/25241.rss" rel="self" type="application/rss+xml"/><pubDate>Thu, 13 Jan 2011 05:31:44 GMT</pubDate><ttl>60</ttl><item><title><![CDATA[Reply to Kender's Collection Thus Far on Tue, 15 Feb 2011 00:55:20 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/gareth" aria-label="Profile: Gareth">@<bdi>Gareth</bdi></a> <a href="/post/466420">said</a>:<br />
Congratulations on getting some BO. <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" />  Now all you need is a Charge, a new knife, a flashlight and you're done, right? ;)</p>
</blockquote>
<p dir="auto">You'll eventually get a Spirit, too. :D</p>
]]></description><link>https://multitool.ninja/post/466444</link><guid isPermaLink="true">https://multitool.ninja/post/466444</guid><dc:creator><![CDATA[ari6126]]></dc:creator><pubDate>Tue, 15 Feb 2011 00:55:20 GMT</pubDate></item><item><title><![CDATA[Reply to Kender's Collection Thus Far on Mon, 14 Feb 2011 22:56:13 GMT]]></title><description><![CDATA[<p dir="auto">Congratulations on getting some BO. <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" />  Now all you need is a Charge, a new knife, a flashlight and you're done, right? ;)</p>
]]></description><link>https://multitool.ninja/post/466420</link><guid isPermaLink="true">https://multitool.ninja/post/466420</guid><dc:creator><![CDATA[Gareth]]></dc:creator><pubDate>Mon, 14 Feb 2011 22:56:13 GMT</pubDate></item><item><title><![CDATA[Reply to Kender's Collection Thus Far on Mon, 14 Feb 2011 03:50:12 GMT]]></title><description><![CDATA[<p dir="auto">Mini Tool (Black Oxide) - November 1994</p>
<p dir="auto">Acquisition:  Purchased in a lot off of eBay in February 2011 that included this tool, two Mag-Lite (AA) flashlights, and a handful of other tools at a total cost (price+shipping) of $20.50.  This tool did not come with a sheath.</p>
<p dir="auto">Notes:  The only flaw aside from some expected wear on the black oxide finish is that the tip of the knife blade is broken.</p>
<p dir="auto">The markings are as follows:<br />
"LEATHERMAN" and "USA" on both sides of the plier pivots.<br />
"LEATHERMAN(R) MINI TOOL", "US PAT PEND", "PORTLAND OR" on the outside of one scale.<br />
"1194" (date code of November 1994) on the inside of the scale that houses the file (no date code on opposite scale).<br />
"LEATHERMAN USA" at the base of the knife blade.<br />
Metric and Imperial ruler markings (12cm/5in.).</p>
<p dir="auto">No unidentified markings exist on this tool.</p>
<p dir="auto">Pictures:<br />
<img src="http://i687.photobucket.com/albums/vv231/kendermaille/Leatherman%20Tools/Mini%20Tool%20-%20Black%20Oxide%20-%201194/Mini-ToolBO1194Closed.jpg" alt="" class="img-markdown  img-fluid" /><img src="http://i687.photobucket.com/albums/vv231/kendermaille/Leatherman%20Tools/Mini%20Tool%20-%20Black%20Oxide%20-%201194/Mini-ToolBO1194Open-Mini.jpg" alt="" class="img-markdown  img-fluid" /><img src="http://i687.photobucket.com/albums/vv231/kendermaille/Leatherman%20Tools/Mini%20Tool%20-%20Black%20Oxide%20-%201194/Mini-ToolBO1194Open-Full.jpg" alt="" class="img-markdown  img-fluid" /><img src="http://i687.photobucket.com/albums/vv231/kendermaille/Leatherman%20Tools/Mini%20Tool%20-%20Black%20Oxide%20-%201194/Mini-ToolBO1194Open-All.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">A picture of the inline tools build into the extended handles, one of the file/screwdriver, and one of the knife.<br />
<img src="http://i687.photobucket.com/albums/vv231/kendermaille/Leatherman%20Tools/Mini%20Tool%20-%20Black%20Oxide%20-%201194/Mini-ToolBO1194Inline-Tools.jpg" alt="" class="img-markdown  img-fluid" /><img src="http://i687.photobucket.com/albums/vv231/kendermaille/Leatherman%20Tools/Mini%20Tool%20-%20Black%20Oxide%20-%201194/Mini-ToolBO1194Driver-File.jpg" alt="" class="img-markdown  img-fluid" /><img src="http://i687.photobucket.com/albums/vv231/kendermaille/Leatherman%20Tools/Mini%20Tool%20-%20Black%20Oxide%20-%201194/Mini-ToolBO1194Knife.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">All in all, I'm very pleased with this tool.  It also marks a first for me:  It's my first black oxide tool!  I'm very hesitant with cleaning it, because I'm really not sure what will or won't hurt the finish.  Once I'm a little more confident, I might try getting that crud off of the screwdriver, but for now I'm not pushing my luck.  I used a little bit of WD on the tool before realizing that it might be a mistake (it's a rust remover, black oxide is a form of rust...) and rinsing it off.  From there I just went with 3-in-1 and some Q-tips.  Luckily, this tool didn't have any caked-on dirt or anything, just some pocket lint and dust.  Cleaned up pretty nicely, and aside from the knife blade it's at 100%.  I'm going to take it with my on my warranty trip to Leatherman on Wednesday, but I'm not holding my breath.  If they can't do anything about it, I'll look into some options for re-tipping the blade.  Normally that wouldn't worry me, but the blade's already so short as it is.</p>
<p dir="auto">Any ideas?</p>
<p dir="auto"><em>Edit:</em>  This also marks one other momentous occasion:  This is my twentieth LM tool!</p>
]]></description><link>https://multitool.ninja/post/466179</link><guid isPermaLink="true">https://multitool.ninja/post/466179</guid><dc:creator><![CDATA[Kender]]></dc:creator><pubDate>Mon, 14 Feb 2011 03:50:12 GMT</pubDate></item><item><title><![CDATA[Reply to Kender's Collection Thus Far on Tue, 08 Feb 2011 08:46:09 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/kender" aria-label="Profile: Kender">@<bdi>Kender</bdi></a> <a href="/post/464571">said</a>:</p>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/ahb" aria-label="Profile: AHB">@<bdi>AHB</bdi></a> <a href="/post/464412">said</a>:</p>
<blockquote>
<p dir="auto">Good looking lineup Kender..  <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
<p dir="auto">(But if your signature pic gets any bigger I* will* pull it..)  ;) :D</p>
</blockquote>
<p dir="auto">Haha, I think I'm done with pics in the sig anyway at least for now.  My threads tend to be pic-heavy enough as it is.</p>
</blockquote>
<p dir="auto">:D :D</p>
]]></description><link>https://multitool.ninja/post/464575</link><guid isPermaLink="true">https://multitool.ninja/post/464575</guid><dc:creator><![CDATA[AHB]]></dc:creator><pubDate>Tue, 08 Feb 2011 08:46:09 GMT</pubDate></item><item><title><![CDATA[Reply to Kender's Collection Thus Far on Tue, 08 Feb 2011 08:39:55 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/david" aria-label="Profile: David">@<bdi>David</bdi></a> <a href="/post/464255">said</a>:<br />
Kender your Leatherman collection is shaping up nicely.    <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" />     :)</p>
</blockquote>
<p dir="auto">Thanks!  I still have a couple of "milestones" to hit that I'm working on:  My first Charge and my first BO tool.  Oh, and looking to replace my folding knife with a LM folder (with a bit driver) and my Mini Mag with a LM flashlight (though which I don't know yet...)</p>
<p dir="auto">But I'm pretty happy to have come across a few less common tools (like my Mini and Pulse, beaten up as they may be) and to have been able to find so many great deals.  The most I've spent on any LM tool so far has been my Wave, which I got for around $42 stacking ridiculous coupons at Fred Meyer.   <img src="/assets/uploads/smileys/angel.gif" alt=":angel:" title="angel" class="forum-smiley emoji" />  Most everything else has wound up around $20 or less.  eBay, Craigslist and the (abundant) local pawn shops are my best friends...</p>
]]></description><link>https://multitool.ninja/post/464574</link><guid isPermaLink="true">https://multitool.ninja/post/464574</guid><dc:creator><![CDATA[Kender]]></dc:creator><pubDate>Tue, 08 Feb 2011 08:39:55 GMT</pubDate></item><item><title><![CDATA[Reply to Kender's Collection Thus Far on Tue, 08 Feb 2011 08:30:41 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/ahb" aria-label="Profile: AHB">@<bdi>AHB</bdi></a> <a href="/post/464412">said</a>:<br />
Good looking lineup Kender..  <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
<p dir="auto">(But if your signature pic gets any bigger I* will* pull it..)  ;) :D</p>
</blockquote>
<p dir="auto">Haha, I think I'm done with pics in the sig anyway at least for now.  My threads tend to be pic-heavy enough as it is.</p>
]]></description><link>https://multitool.ninja/post/464571</link><guid isPermaLink="true">https://multitool.ninja/post/464571</guid><dc:creator><![CDATA[Kender]]></dc:creator><pubDate>Tue, 08 Feb 2011 08:30:41 GMT</pubDate></item><item><title><![CDATA[Reply to Kender's Collection Thus Far on Mon, 07 Feb 2011 20:56:01 GMT]]></title><description><![CDATA[<p dir="auto">Good looking lineup Kender..  <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
<p dir="auto">(But if your signature pic gets any bigger I* will* pull it..)  ;) :D</p>
]]></description><link>https://multitool.ninja/post/464412</link><guid isPermaLink="true">https://multitool.ninja/post/464412</guid><dc:creator><![CDATA[AHB]]></dc:creator><pubDate>Mon, 07 Feb 2011 20:56:01 GMT</pubDate></item><item><title><![CDATA[Reply to Kender's Collection Thus Far on Mon, 07 Feb 2011 13:41:29 GMT]]></title><description><![CDATA[<p dir="auto">the collection is growing quickly.  I can relate.  lol</p>
]]></description><link>https://multitool.ninja/post/464301</link><guid isPermaLink="true">https://multitool.ninja/post/464301</guid><dc:creator><![CDATA[New_World]]></dc:creator><pubDate>Mon, 07 Feb 2011 13:41:29 GMT</pubDate></item><item><title><![CDATA[Reply to Kender's Collection Thus Far on Mon, 07 Feb 2011 08:03:49 GMT]]></title><description><![CDATA[<p dir="auto">Kender your Leatherman collection is shaping up nicely.    <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" />     :)</p>
]]></description><link>https://multitool.ninja/post/464255</link><guid isPermaLink="true">https://multitool.ninja/post/464255</guid><dc:creator><![CDATA[David]]></dc:creator><pubDate>Mon, 07 Feb 2011 08:03:49 GMT</pubDate></item><item><title><![CDATA[Reply to Kender's Collection Thus Far on Mon, 07 Feb 2011 07:40:35 GMT]]></title><description><![CDATA[<p dir="auto">And here's a nice big group shot.  This is all of my LM tools, save for the accessories.  Not pictured:  Bit kit, Removable Bit Driver, Standard Tool Adapter and Universal Tool Adapter.</p>
<p dir="auto"><img src="http://i687.photobucket.com/albums/vv231/kendermaille/Leatherman%20Tools/2011-Feb-5Collection.jpg" alt="" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/464250</link><guid isPermaLink="true">https://multitool.ninja/post/464250</guid><dc:creator><![CDATA[Kender]]></dc:creator><pubDate>Mon, 07 Feb 2011 07:40:35 GMT</pubDate></item><item><title><![CDATA[Reply to Kender's Collection Thus Far on Mon, 07 Feb 2011 07:30:43 GMT]]></title><description><![CDATA[<p dir="auto">I had a pretty good haul yesterday between a Craigslist transaction and a good pawn shop find.  To sum it up, I got a fair-condition Kick, poor-condition Pulse, and excellent-condition PST-II for $35, and a brand-new Fuse for $15.  Four tools for $50 - not too shabby for a day's hunting.</p>
<p dir="auto">The Craigslist thing was a good find.  I was initially the most excited about the Pulse, but less so once I saw the state it was in.  It's pretty beaten up, but actually is functionally fine.  The Kick is in good shape, but one of the screwdrivers needs reshaping.  The PST-II, though--that's where I got most excited.  It was listed just as a "Leatherman Tool" which a lot of people would call it since that's what it says on the handle.  I assumed the listing referred to a PST, which I already have three of, but figured it's always nice to have another.  I was delighted to find that it was a PST II, and in excellent shape.  It has the newer style ("pivot-out") screwdrivers, but not the PST II logo.  It was funny, as my girlfriend was with me at the time and looked them over as well.  As we were walking away after I purchased them, she said "that's a PST-II, isn't it?  Aren't they more valuable?"  I've taught her well.</p>
<p dir="auto">As for the Fuse, I found it at a pawn shop.  They wanted $20, but I took a shot in the dark and managed to get it for $15.</p>
<p dir="auto"><strong>Note:</strong> For some reason, there's some weird color stuff going on in my pictures, especially the PST-II and the Pulse.</p>
<p dir="auto"><strong>Kick - October 2005</strong></p>
<p dir="auto">Acquisition:  Purchased from a man off of Craigslist in February 2011.  In fair condition, the only major defect being a chipped screwdriver tip, which should be easily fixed.  Was very dirty but cleaned up nicely.  Purchased alongside a Pulse and PST II for $35.  No sheath was included with this tool.</p>
<p dir="auto">Markings:  The only marking other than Leatherman logos is "E1" stamped on the Phillips driver.</p>
<p dir="auto">Notes:  I believe this to be an unremarkable Kick, although any interesting markings have been noted.  The thumbnail nick on the knife is on the outboard side.</p>
<p dir="auto">I have also noted the lack of any sort of "USA" marking on any portion of the tool itself.</p>
<p dir="auto"><img src="http://i687.photobucket.com/albums/vv231/kendermaille/Leatherman%20Tools/Kick%20-%20October%202005/Kick1005Closed.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i687.photobucket.com/albums/vv231/kendermaille/Leatherman%20Tools/Kick%20-%20October%202005/Kick1005Open.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i687.photobucket.com/albums/vv231/kendermaille/Leatherman%20Tools/Kick%20-%20October%202005/Kick1005Open-All.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><strong>PST II - April/May 1998</strong></p>
<p dir="auto">Acquisition:  Purchased from a man off of Craigslist in February 2011.  In good condition.  Purchased alongside a Kick and Pulse for $35.  This tool came with a sheath that has a "BP" shield logo on it.  It was a little dirty but has no damage and cleaned up very nicely.</p>
<p dir="auto">Markings:  This tool lacks the "REG TM" marking.  The Phillips driver has "B" stamped on one side and "3" on the other.  The Phillips driver is the "pivot out" (newer) style of driver, so it seems likely that whatever the symbols mean, the second one was picked up in the switch to the pivot-out drivers.  The only other interesting marking is on the blade tang.  It reads "LEATHERMAN USA" like most do, but the USA portion has dashes on either side ("-USA-") which is a trait I have not seen on any other Leatherman tool.</p>
<p dir="auto"><img src="http://i687.photobucket.com/albums/vv231/kendermaille/Leatherman%20Tools/PST%20II%20-%20April-May%201998/PST-II0498-0598Closed.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i687.photobucket.com/albums/vv231/kendermaille/Leatherman%20Tools/PST%20II%20-%20April-May%201998/PST-II0498-0598Open.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i687.photobucket.com/albums/vv231/kendermaille/Leatherman%20Tools/PST%20II%20-%20April-May%201998/PST-II0498-0598Open-All.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i687.photobucket.com/albums/vv231/kendermaille/Leatherman%20Tools/PST%20II%20-%20April-May%201998/PST-II0498-0598Driver-Comparison.jpg" alt="" class="img-markdown  img-fluid" /><img src="http://i687.photobucket.com/albums/vv231/kendermaille/Leatherman%20Tools/PST%20II%20-%20April-May%201998/PST-II0498-0598No-Trademarkjpg.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><strong>Pulse - July 2000</strong></p>
<p dir="auto">Acquisition:  Purchased from a man off of Craigslist in February 2011.  In poor condition.  Seller said he thought it must have been run over by a car.  Handles were loose but I was able to tighten them up.  The plier jaws are a little loose but functional.  Surprisingly, while the tool bears considerable cosmetic damage, the tools are actually all in good working condition.  Purchased alongside a Kick and PST II for $35.  No sheath was included with this tool.  This tool has a "Khamsai Vue" logo on it.  ("Khamsai Vue", as far as I can tell, is either the name of an Asian person to whom the tool may have previously belonged, or possibly a dry-cleaning service or contractor.)</p>
<p dir="auto">Markings:  This tool is the first Leatherman tool I have seen yet to have a Phillips driver with absoultely no marking on it or under the scale near it.  In fact, save for Leatherman logos (on the scales, pliers, knife and file), the Khamsai Vue logo, and the date code, there are no markings on this tool whatsoever.</p>
<p dir="auto">Notes:  Like previously stated, this tool appears heavily damaged at first glance and is a bit loose.  However, all of the tools and locks are completely functional.</p>
<p dir="auto"><img src="http://i687.photobucket.com/albums/vv231/kendermaille/Leatherman%20Tools/Pulse%20-%20July%202000/Pulse0700Closed.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i687.photobucket.com/albums/vv231/kendermaille/Leatherman%20Tools/Pulse%20-%20July%202000/Pulse0700Closed-2.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i687.photobucket.com/albums/vv231/kendermaille/Leatherman%20Tools/Pulse%20-%20July%202000/Pulse0700Open.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i687.photobucket.com/albums/vv231/kendermaille/Leatherman%20Tools/Pulse%20-%20July%202000/Pulse0700Open-All.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><strong>Fuse - December 2010/January 2011</strong></p>
<p dir="auto">Acquisition:  Purchased from a pawn shop in February 2011.  This tool is practically brand new and shows no signs of use or wear.  I was able to talk them down from the asking price of $20 to a mere $15.  This tool did not have a sheath.</p>
<p dir="auto">Markings:  Phillips driver has a marking of "A1" on it, and a marking of "B3" on the scale beneath it.  There is a marking of "4A" on the scale under the can opener.  There is a marking of "I" under the scissors.  "2A" under the knife, "B3" under the medium-size slotted driver, and "I" again near the lanyard ring.  This tool has the most markings that I've seen.  Whether the markings on the scales beneath the tools refer to the tools themselves, I don't know.  Maybe it's reference for the assembly process?</p>
<p dir="auto">Notes:  This tool was purchased effectively brand new.  How it made its way into a pawn shop so quickly after its manufacture (purchased Feb 5, 2011, and it has a date code of January 2011) is a mystery and a surprise to me, although I suppose it could have been an undesired gift or something like that.</p>
<p dir="auto">This tool does have a defect, which may also be the reason that it found its way to a pawn shop so quickly.  The "medium" sized slotted screwdriver is not tipped--that is, the tool is the full thickness all the way to the tip, and the taper down to screwdriver size was never ground into it, making it non-functional.  This is the tool's sole imperfection, and it is otherwise perfect.</p>
<p dir="auto">Also of interest, two of the scales on the Fuse have the same resting bumps found on the Zytel inserts of the Blast--despite the fact that the Fuse doesn't have a file or any other tool that utilizes them.  This suggests that the Fuse and Blast use scales from the same stock.</p>
<p dir="auto"><img src="http://i687.photobucket.com/albums/vv231/kendermaille/Leatherman%20Tools/Fuse%20-%20December%202010-January%202011/Fuse1210-0111Closed.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i687.photobucket.com/albums/vv231/kendermaille/Leatherman%20Tools/Fuse%20-%20December%202010-January%202011/Fuse1210-0111Open.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i687.photobucket.com/albums/vv231/kendermaille/Leatherman%20Tools/Fuse%20-%20December%202010-January%202011/Fuse1210-0111Open-All.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i687.photobucket.com/albums/vv231/kendermaille/Leatherman%20Tools/Fuse%20-%20December%202010-January%202011/Fuse1210-0111Driver-Defect.jpg" alt="" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/464249</link><guid isPermaLink="true">https://multitool.ninja/post/464249</guid><dc:creator><![CDATA[Kender]]></dc:creator><pubDate>Mon, 07 Feb 2011 07:30:43 GMT</pubDate></item><item><title><![CDATA[Reply to Kender's Collection Thus Far on Fri, 28 Jan 2011 06:35:37 GMT]]></title><description><![CDATA[<p dir="auto">Removable Bit Driver - 2005</p>
<p dir="auto">Acquisition:  Purchased from eBay in January 2011.</p>
<p dir="auto">This was my first foray into the realm of using 3d bits with my Leatherman tools.  It's nice, but I prefer the Universal Tool Adapter so far.</p>
<p dir="auto">It fits my Blast, but the result is a very long implement that, to me, feels like it might bend--possibly even bend the main tool--if much torque were applied.  It holds bits pretty securely, but by snapping the bits into place and not with a magnet.</p>
<p dir="auto">This came new in box with a sheath.  The sheath is great.  It has room for my bit kit (the two bit cards with flat bits for the flat bit driver), the Removable Bit Driver in its card, a pencil and a bit extender (not the Leatherman bit extender, but a regular 1/4" hex screwdriver extender that holds bits with magnetism rather than snapping them in).  It also has a smallish front pocket that I'm not sure is intentional (it's created by the velcro closure) that is the right size to hold three long 1/4" hex bits:  one for a large slotted bit, a large Phillips bit, and a bit for the security screws that are used in NES cartridges.  There are a huge number of bits in this one pouch.  I like it.</p>
<p dir="auto">The card itself also has two spaces that are capable of holding 1/4" hex bits.  In one, I keep a spare large slotted driver bit, and in the other, a 1/4" ratchet adapter.  I don't really see myself in a situation where i'll need the ratchet adapter, have access to ratchet bits, and yet not a ratchet, but hey--what the heck, right?</p>
<p dir="auto"><img src="http://i687.photobucket.com/albums/vv231/kendermaille/Leatherman%20Tools/Removable%20Bit%20Driver/RBD200501.jpg" alt="" class="img-markdown  img-fluid" /><img src="http://i687.photobucket.com/albums/vv231/kendermaille/Leatherman%20Tools/Removable%20Bit%20Driver/RBD200502.jpg" alt="" class="img-markdown  img-fluid" /><img src="http://i687.photobucket.com/albums/vv231/kendermaille/Leatherman%20Tools/Removable%20Bit%20Driver/RBD2005Blast.jpg" alt="" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/461022</link><guid isPermaLink="true">https://multitool.ninja/post/461022</guid><dc:creator><![CDATA[Kender]]></dc:creator><pubDate>Fri, 28 Jan 2011 06:35:37 GMT</pubDate></item><item><title><![CDATA[Reply to Kender's Collection Thus Far on Fri, 28 Jan 2011 06:04:01 GMT]]></title><description><![CDATA[<p dir="auto">Universal Tool Adapter - March 2000</p>
<p dir="auto">Acquisition:  Purchased from a man in California via Craigslist in January 2011</p>
<p dir="auto">This is, as far as I know, a Universal Tool Adapter and not the Standard Tool Adapter.  It seems to fit my (New) wave the best, but also seems to work well with my Blast, PST, and (surprisingly) Juice Pro.  It does not fit the Juice C2 well.  It does not fit the original Super Tool at all.</p>
<p dir="auto">I like it more than the Removable Bit Driver for the Kick/Blast/Fuse series.  The UTA feels more solid to me, and I like the ability to set it to 45- or 90-degree positions as well.</p>
<p dir="auto">Unfortunately, it didn't come with a case or sheath.  However, I don't mind so much because it actually fits quite nicely into the front compartment of the Premium sheath that I keep my Wave in.  I haven't quite worked out where I'll carry the bits.</p>
<p dir="auto">A few pictures:<br />
<img src="http://i687.photobucket.com/albums/vv231/kendermaille/Leatherman%20Tools/Universal%20Tool%20Adapter/UTAMarch-200001.jpg" alt="" class="img-markdown  img-fluid" /><img src="http://i687.photobucket.com/albums/vv231/kendermaille/Leatherman%20Tools/Universal%20Tool%20Adapter/UTAMarch-200002.jpg" alt="" class="img-markdown  img-fluid" /><img src="http://i687.photobucket.com/albums/vv231/kendermaille/Leatherman%20Tools/Universal%20Tool%20Adapter/UTAMarch-200003.jpg" alt="" class="img-markdown  img-fluid" /><img src="http://i687.photobucket.com/albums/vv231/kendermaille/Leatherman%20Tools/Universal%20Tool%20Adapter/UTAMarch-200004.jpg" alt="" class="img-markdown  img-fluid" /><img src="http://i687.photobucket.com/albums/vv231/kendermaille/Leatherman%20Tools/Universal%20Tool%20Adapter/UTAMarch-200005.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">A couple of pictures of the UTA on my Wave:<br />
<img src="http://i687.photobucket.com/albums/vv231/kendermaille/Leatherman%20Tools/Universal%20Tool%20Adapter/UTAMarch-2000Wave-01.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i687.photobucket.com/albums/vv231/kendermaille/Leatherman%20Tools/Universal%20Tool%20Adapter/UTAMarch-2000Wave-02.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i687.photobucket.com/albums/vv231/kendermaille/Leatherman%20Tools/Universal%20Tool%20Adapter/UTAMarch-2000Wave-03.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">And a picture of it in the sheath with my Wave:<br />
<img src="http://i687.photobucket.com/albums/vv231/kendermaille/Leatherman%20Tools/Universal%20Tool%20Adapter/UTAMarch-2000Sheath.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Coming next, the Removable Bit Driver.</p>
]]></description><link>https://multitool.ninja/post/461014</link><guid isPermaLink="true">https://multitool.ninja/post/461014</guid><dc:creator><![CDATA[Kender]]></dc:creator><pubDate>Fri, 28 Jan 2011 06:04:01 GMT</pubDate></item><item><title><![CDATA[Reply to Kender's Collection Thus Far on Sun, 23 Jan 2011 22:29:44 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/kender" aria-label="Profile: Kender">@<bdi>Kender</bdi></a> <a href="/post/459243">said</a>:<br />
You sure do.  I love the Juice design, but I have to say this:  I have not had a good time with the Juice corkscrews.  I think that if I were actually going to EDC a Juice (I don't) I would probably want one that does not have a corkscrew.  Maybe it was just that the cork in the bottle of wine I had was in too tight, but I could not get it open with my Juice Pro.  My hand still hurts from trying.</p>
<p dir="auto">The foil cutter was excellent, though.  :P</p>
</blockquote>
<p dir="auto">good to know.<br />
I was considering it, but I don't have a need for a corkscrew and I like the looks of the juice w/o the corkscrew. (I'm picky)</p>
]]></description><link>https://multitool.ninja/post/459869</link><guid isPermaLink="true">https://multitool.ninja/post/459869</guid><dc:creator><![CDATA[New_World]]></dc:creator><pubDate>Sun, 23 Jan 2011 22:29:44 GMT</pubDate></item><item><title><![CDATA[Reply to Kender's Collection Thus Far on Sun, 23 Jan 2011 17:44:18 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/gareth" aria-label="Profile: Gareth">@<bdi>Gareth</bdi></a> <a href="/post/459671">said</a>:<br />
That Pro for $20 was a steal!  Great finds mate.</p>
</blockquote>
<p dir="auto">I agree, the Pro for $20 is a deal I doubt many people would pass on.</p>
]]></description><link>https://multitool.ninja/post/459751</link><guid isPermaLink="true">https://multitool.ninja/post/459751</guid><dc:creator><![CDATA[Crouton]]></dc:creator><pubDate>Sun, 23 Jan 2011 17:44:18 GMT</pubDate></item><item><title><![CDATA[Reply to Kender's Collection Thus Far on Sun, 23 Jan 2011 17:16:31 GMT]]></title><description><![CDATA[<p dir="auto">Thanks! I'm happy with it. Just need to work a nick out of the blade. You should have seen it when I got it, though. Dirty, and it looked as though someone had tried to jam a cookie into it. It was pretty bad. Cleaned up nicely, though.</p>
]]></description><link>https://multitool.ninja/post/459736</link><guid isPermaLink="true">https://multitool.ninja/post/459736</guid><dc:creator><![CDATA[Kender]]></dc:creator><pubDate>Sun, 23 Jan 2011 17:16:31 GMT</pubDate></item><item><title><![CDATA[Reply to Kender's Collection Thus Far on Sun, 23 Jan 2011 12:45:02 GMT]]></title><description><![CDATA[<p dir="auto">That Pro for $20 was a steal!  Great finds mate.</p>
]]></description><link>https://multitool.ninja/post/459671</link><guid isPermaLink="true">https://multitool.ninja/post/459671</guid><dc:creator><![CDATA[Gareth]]></dc:creator><pubDate>Sun, 23 Jan 2011 12:45:02 GMT</pubDate></item><item><title><![CDATA[Reply to Kender's Collection Thus Far on Sun, 23 Jan 2011 06:18:20 GMT]]></title><description><![CDATA[<p dir="auto">Mini Tool - Manufacture Date Unknown</p>
<p dir="auto">Acquisition:  Purchased at a flea market in Gresham, OR.  January 22nd, 2011.  $4.</p>
<p dir="auto">Logo:  Small "LEATHERMAN® MNI TOOL"<br />
Below Logo/Trademark:  "US PAT 4744272"/"PORTLAND OR"<br />
Scale Joints:  Knurled screws; lanyard attachment<br />
Ruler:  Inches/centimeters<br />
Pliers:  Stamped "LEATHERMAN USA"<br />
Knife Blade:  Clip point; stamped "LEATHERMAN USA" (Broken tip)<br />
File:  No stamp (Almost completely broken)</p>
<p dir="auto">Additional notes:<br />
Has a "Full Circle" advertising logo.  Was very dirty but cleaned up nicely.  All the mechanics of opening and closing the tool work smoothly, and the pliers are in great shape.  The knife blade has the tip broken off, and the file is broken all the way down to about 1/4" above its base.  The handle "extensions" are in good shape and show fairly little wear.</p>
<p dir="auto">This tool did not have a sheath.</p>
<p dir="auto"><img src="http://i687.photobucket.com/albums/vv231/kendermaille/Leatherman%20Tools/Mini-ToolUnknownClosed.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i687.photobucket.com/albums/vv231/kendermaille/Leatherman%20Tools/Mini-ToolUnknownOpen-1.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i687.photobucket.com/albums/vv231/kendermaille/Leatherman%20Tools/Mini-ToolUnknownOpen-2.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i687.photobucket.com/albums/vv231/kendermaille/Leatherman%20Tools/Mini-ToolUnknownOpen-All.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i687.photobucket.com/albums/vv231/kendermaille/Leatherman%20Tools/JuiceProFeb2002Plier-Markings-2.jpg" alt="" class="img-markdown  img-fluid" /><img src="http://i687.photobucket.com/albums/vv231/kendermaille/Leatherman%20Tools/Mini-ToolUnknownFile.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">A few pictures of the Mini Tool with a PST and a Super Tool for size comparison:</p>
<p dir="auto">Top to bottom:  Super Tool, PST, Mini Tool</p>
<p dir="auto">The unfortunate damage on the knife and file.<br />
<img src="http://i687.photobucket.com/albums/vv231/kendermaille/Leatherman%20Tools/Mini-ToolUnknownSize-Comparison-1.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i687.photobucket.com/albums/vv231/kendermaille/Leatherman%20Tools/Mini-ToolUnknownSize-Comparison-3.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">And a closeup of the pliers for comparison.<br />
Top from left to right:  Super Tool, PST<br />
Bottom:  Mini Tool<br />
<img src="http://i687.photobucket.com/albums/vv231/kendermaille/Leatherman%20Tools/Mini-ToolUnknownSize-Comparison-2.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">So I know it's a long shot, but does anyone for some bizarre reason happen to have any parts lying around that might happen to include a Mini Tool knife blade and/or file?  If so,  <img src="/assets/uploads/smileys/gimme.gif" alt=":gimme:" title="gimme" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/459619</link><guid isPermaLink="true">https://multitool.ninja/post/459619</guid><dc:creator><![CDATA[Kender]]></dc:creator><pubDate>Sun, 23 Jan 2011 06:18:20 GMT</pubDate></item><item><title><![CDATA[Reply to Kender's Collection Thus Far on Sat, 22 Jan 2011 01:42:25 GMT]]></title><description><![CDATA[<p dir="auto">You sure do.  I love the Juice design, but I have to say this:  I have not had a good time with the Juice corkscrews.  I think that if I were actually going to EDC a Juice (I don't) I would probably want one that does not have a corkscrew.  Maybe it was just that the cork in the bottle of wine I had was in too tight, but I could not get it open with my Juice Pro.  My hand still hurts from trying.</p>
<p dir="auto">The foil cutter was excellent, though.  :P</p>
]]></description><link>https://multitool.ninja/post/459243</link><guid isPermaLink="true">https://multitool.ninja/post/459243</guid><dc:creator><![CDATA[Kender]]></dc:creator><pubDate>Sat, 22 Jan 2011 01:42:25 GMT</pubDate></item><item><title><![CDATA[Reply to Kender's Collection Thus Far on Fri, 21 Jan 2011 10:03:44 GMT]]></title><description><![CDATA[<p dir="auto">love all the pics.<br />
I need to get a juice s2!</p>
]]></description><link>https://multitool.ninja/post/458950</link><guid isPermaLink="true">https://multitool.ninja/post/458950</guid><dc:creator><![CDATA[New_World]]></dc:creator><pubDate>Fri, 21 Jan 2011 10:03:44 GMT</pubDate></item><item><title><![CDATA[Reply to Kender's Collection Thus Far on Tue, 18 Jan 2011 03:45:28 GMT]]></title><description><![CDATA[<p dir="auto">Juice Pro - February 2002</p>
<p dir="auto">Acquisition:  Purchased from a pawn shop in January 2011, Portland, OR. ($20, with sheath)</p>
<p dir="auto">Markings:  The Phillips screwdriver bears the mark "1F"--same as the Juice C2.  The base of the pliers also bear markings on both sides just above where they connect to the scales:  With the tool open and the Leatherman logo facing the viewer, "1" is on the left plier, and "F" on the right.  On the other side, "1" and "C".  Meaning is currently unknown.</p>
<p dir="auto">Notes:  I believe this to be an unremarkable Juice Pro, although any interesting markings have been noted.</p>
<p dir="auto">Like the Juice C2, the knife blade on the Juice Pro does not have "LEATHERMAN" stamped on it.</p>
<p dir="auto">It's also worth noting that the Juice Pro does not say "USA" anywhere on the tool.</p>
<p dir="auto">The Juice Pro was produced for only four years from 2001-2005.</p>
<p dir="auto">I forgot to photograph the tweezers--I do hope this is acceptable.</p>
<p dir="auto">I like this one, and I think I got it at a pretty good price.  It was $25 at a pawn shop, and I talked her down to $20 (USD).  For a tool as hard to find as this one, I think I got a good deal.</p>
<p dir="auto"><img src="http://i687.photobucket.com/albums/vv231/kendermaille/Leatherman%20Tools/JuiceProFeb2002Closed-2.jpg" alt="" class="img-markdown  img-fluid" /><img src="http://i687.photobucket.com/albums/vv231/kendermaille/Leatherman%20Tools/JuiceProFeb2002Closed.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i687.photobucket.com/albums/vv231/kendermaille/Leatherman%20Tools/JuiceProFeb2002Open.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i687.photobucket.com/albums/vv231/kendermaille/Leatherman%20Tools/JuiceProFeb2002Open-All.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i687.photobucket.com/albums/vv231/kendermaille/Leatherman%20Tools/JuiceProFeb2002Plier-Markings-2.jpg" alt="" class="img-markdown  img-fluid" /><img src="http://i687.photobucket.com/albums/vv231/kendermaille/Leatherman%20Tools/JuiceProFeb2002Plier-Markings-1.jpg" alt="" class="img-markdown  img-fluid" /><img src="http://i687.photobucket.com/albums/vv231/kendermaille/Leatherman%20Tools/JuiceProFeb2002Phillips-Marking.jpg" alt="" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/457788</link><guid isPermaLink="true">https://multitool.ninja/post/457788</guid><dc:creator><![CDATA[Kender]]></dc:creator><pubDate>Tue, 18 Jan 2011 03:45:28 GMT</pubDate></item><item><title><![CDATA[Reply to Kender's Collection Thus Far on Fri, 14 Jan 2011 20:19:48 GMT]]></title><description><![CDATA[<p dir="auto">Thanks for the update,great pictures. <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/456706</link><guid isPermaLink="true">https://multitool.ninja/post/456706</guid><dc:creator><![CDATA[Smitty44]]></dc:creator><pubDate>Fri, 14 Jan 2011 20:19:48 GMT</pubDate></item><item><title><![CDATA[Reply to Kender's Collection Thus Far on Fri, 14 Jan 2011 19:08:46 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/kender" aria-label="Profile: Kender">@<bdi>Kender</bdi></a> <a href="/post/456545">said</a>:<br />
It doesn't seem to want to let me edit my first post, so pictures go here instead!</p>
<p dir="auto">Without further ado:</p>
<p dir="auto"><strong>PST - Circa 1985-1989; Japan</strong><br />
<img src="http://i687.photobucket.com/albums/vv231/kendermaille/PST1985-1989JapanClosed.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i687.photobucket.com/albums/vv231/kendermaille/PST1985-1989JapanFile-1.jpg" alt="" class="img-markdown  img-fluid" /><img src="http://i687.photobucket.com/albums/vv231/kendermaille/PST1985-1989JapanFile-2.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i687.photobucket.com/albums/vv231/kendermaille/PST1985-1989JapanMilled-Awl.jpg" alt="" class="img-markdown  img-fluid" /><img src="http://i687.photobucket.com/albums/vv231/kendermaille/PST1985-1989JapanTrademark.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i687.photobucket.com/albums/vv231/kendermaille/PST1985-1989JapanJaws.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i687.photobucket.com/albums/vv231/kendermaille/PST1985-1989JapanOpen-All.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><strong>PST - October/December 1994; USA; Marlboro Country Store</strong><br />
<img src="http://i687.photobucket.com/albums/vv231/kendermaille/PSTOct-Dec2004MarlboroClosed.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i687.photobucket.com/albums/vv231/kendermaille/PSTOct-Dec2004MarlboroMCS-Logo.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i687.photobucket.com/albums/vv231/kendermaille/PSTOct-Dec2004MarlboroOpen.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i687.photobucket.com/albums/vv231/kendermaille/PSTOct-Dec2004MarlboroOpen-All.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i687.photobucket.com/albums/vv231/kendermaille/PSTOct-Dec2004MarlboroPhillips-Marking.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><strong>PST - Circa Late '80s/early '90s; USA</strong><br />
<img src="http://i687.photobucket.com/albums/vv231/kendermaille/PST80s-90sClosed.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i687.photobucket.com/albums/vv231/kendermaille/PST80s-90sOpen-All.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><strong>PST II - January 1996</strong><br />
<img src="http://i687.photobucket.com/albums/vv231/kendermaille/PSTIIJan1996Closed.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i687.photobucket.com/albums/vv231/kendermaille/PSTIIJan1996Closed-2.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i687.photobucket.com/albums/vv231/kendermaille/PSTIIJan1996Blade.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i687.photobucket.com/albums/vv231/kendermaille/PSTIIJan1996File.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i687.photobucket.com/albums/vv231/kendermaille/PSTIIJan1996Open-All.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i687.photobucket.com/albums/vv231/kendermaille/PSTIIJan1996Phillips-Marking.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i687.photobucket.com/albums/vv231/kendermaille/PSTIIJan1996Scissors.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><strong>Super Tool - November/December 1995</strong><br />
<img src="http://i687.photobucket.com/albums/vv231/kendermaille/Super-ToolNov-Dec1995Closed.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i687.photobucket.com/albums/vv231/kendermaille/Super-ToolNov-Dec1995Open.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i687.photobucket.com/albums/vv231/kendermaille/Super-ToolNov-Dec1995Open-All.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">A couple of Super Tool/PST size comparison pics:<br />
<img src="http://i687.photobucket.com/albums/vv231/kendermaille/Super-ToolNov-Dec1995PST-Compare-1.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i687.photobucket.com/albums/vv231/kendermaille/Super-ToolNov-Dec1995PST-Compare-2.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><strong>Micra - October 2009</strong><br />
<img src="http://i687.photobucket.com/albums/vv231/kendermaille/MicraOct2009Closed-1.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i687.photobucket.com/albums/vv231/kendermaille/MicraOct2009Closed-2.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i687.photobucket.com/albums/vv231/kendermaille/MicraOct2009Open.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i687.photobucket.com/albums/vv231/kendermaille/MicraOct2009Open-All.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">I found a leather case that's perfect for a Micra, so I keep it in this so that my keys don't damage it.  I actually bought three of this case.  Thrift stores are great.   :)<br />
<img src="http://i687.photobucket.com/albums/vv231/kendermaille/MicraOct2009Case-1.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i687.photobucket.com/albums/vv231/kendermaille/MicraOct2009Case-2.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i687.photobucket.com/albums/vv231/kendermaille/MicraOct2009Case-3.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><strong>New Wave - September/October 2010</strong><br />
<img src="http://i687.photobucket.com/albums/vv231/kendermaille/NewWaveSept-Oct2010Closed.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i687.photobucket.com/albums/vv231/kendermaille/NewWaveSept-Oct2010Markings-1.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i687.photobucket.com/albums/vv231/kendermaille/NewWaveSept-Oct2010Markings-2.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i687.photobucket.com/albums/vv231/kendermaille/NewWaveSept-Oct2010Open-All-With-Bit-Kit.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><strong>Juice C2 (Red) - September 2001</strong><br />
<img src="http://i687.photobucket.com/albums/vv231/kendermaille/JuiceC2RedSept2001Logo.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i687.photobucket.com/albums/vv231/kendermaille/JuiceC2RedSept2001Logo-2.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i687.photobucket.com/albums/vv231/kendermaille/JuiceC2RedSept2001Open-All.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i687.photobucket.com/albums/vv231/kendermaille/JuiceC2RedSept2001Phillips-Marking.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i687.photobucket.com/albums/vv231/kendermaille/JuiceC2RedSept2001Plier-Markings-1.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i687.photobucket.com/albums/vv231/kendermaille/JuiceC2RedSept2001Plier-Markings-2.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i687.photobucket.com/albums/vv231/kendermaille/JuiceC2-RedSept2001Open.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><strong>Squirt P4 (Glacier Blue) - August 2007 and June 2002</strong><br />
Since they're identical, save for wear and date codes, these two were photographed together.</p>
<p dir="auto"><img src="http://i687.photobucket.com/albums/vv231/kendermaille/Squirt-P4-BlueAug2007Jun2002Closed.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i687.photobucket.com/albums/vv231/kendermaille/Squirt-P4-BlueAug2007Jun2002Open.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i687.photobucket.com/albums/vv231/kendermaille/Squirt-P4-BlueAug2007Open-All.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><strong>Style CS - September 2010</strong><br />
<img src="http://i687.photobucket.com/albums/vv231/kendermaille/Style-CSSept2010Closed.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i687.photobucket.com/albums/vv231/kendermaille/Style-CSSept2010Open.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i687.photobucket.com/albums/vv231/kendermaille/Style-CSSept2010Open-All.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Next up, the new Leatherman tool that I got today.</p>
</blockquote>
<p dir="auto">Schweet!</p>
]]></description><link>https://multitool.ninja/post/456682</link><guid isPermaLink="true">https://multitool.ninja/post/456682</guid><dc:creator><![CDATA[stressmaster5000]]></dc:creator><pubDate>Fri, 14 Jan 2011 19:08:46 GMT</pubDate></item><item><title><![CDATA[Reply to Kender's Collection Thus Far on Fri, 14 Jan 2011 07:36:10 GMT]]></title><description><![CDATA[<p dir="auto">New addition:</p>
<p dir="auto"><strong>Blast - September 2006</strong></p>
<p dir="auto">Acquisition:  Purchased from a man off of Craigslist.  In like-new condition, it appears to never have been used.  It was a steal at $20 (I see it retail for about $60.)</p>
<p dir="auto">Markings:  Inside both scales, underneath the tools are the markings "1B", and the base of the Phillips screwdriver has the marking "B1" (not "1B" again).</p>
<p dir="auto">Notes:  I believe this to be an unremarkable Blast, although any interesting markings have been noted.</p>
<p dir="auto">I have also noted the lack of any sort of "USA" marking on any portion of the tool itself.</p>
<p dir="auto"><img src="http://i687.photobucket.com/albums/vv231/kendermaille/Leatherman%20Tools/BlastSept2006Closed.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i687.photobucket.com/albums/vv231/kendermaille/Leatherman%20Tools/BlastSept2006B1-Mark-Phillips.jpg" alt="" class="img-markdown  img-fluid" /><img src="http://i687.photobucket.com/albums/vv231/kendermaille/Leatherman%20Tools/BlastSept20061B-Mark.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i687.photobucket.com/albums/vv231/kendermaille/Leatherman%20Tools/BlastSept2006Open-All.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">And with that, I bid you a good night!  Enjoy!</p>
]]></description><link>https://multitool.ninja/post/456547</link><guid isPermaLink="true">https://multitool.ninja/post/456547</guid><dc:creator><![CDATA[Kender]]></dc:creator><pubDate>Fri, 14 Jan 2011 07:36:10 GMT</pubDate></item></channel></rss>