<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0"><channel><title><![CDATA[Bye bye Gerber!]]></title><description><![CDATA[<p dir="auto">Sawman is right about Gerber.  I wanted to give Gerber a fair shake so I bought a new Octane and Crucial Fast, as well as a recently made 400 compact sport and shortcut.  The three foreign made tools totally sucked.  Wire cutters didn't cut wire worth a hoot on the Crucial or the Octane.  The Octane's blade was sort of an afterthought in a thin aluminum housing and Gerber should be ashamed of the liner lock on it, that piece of tin that I can defeat with hand pressure.  The Crucial was even worse, all the tools wiggled a LOT, the whole frame would flex with a little pressure, and the liner locks on the tools didn't even want to engage, and were too thin for their intended purpose.  The blade fired weak on the Crucial and locked up even weaker and all three of the imported tools, the Crucial, Octane, and Shortcut, didn't take an edge worth a hoot (and I know how to sharpen everything from a full serrated H1 Tasman Salt to a recurve Kershaw Storm II, so it ain't just me).  The serrations on the Octane blade are a joke, why are they so small and the Crucial ones normal size?  The mostly US made MP400 combo blade DID take a great edge and the blade steel on it is far better than the other 3 tools.  Out of the 4 tools, the 400 is not a bad tool, but it's a little dated design and weighs about as much as a Spirit or Wave anyway, so I sold it.   In my work I cut up a fair amount of thick cardboard and dense styrofoam stuff, so I have to have a blade that can take a little pressure, especially if it is a pocket clip tool that is supposed to fill in for an EDC folder, as the Octane and Crucial are intended to do.  Leatherman, and Victorinox for that matter, have never let me down in the blade area, or most other areas.  Looks like quality for Gerber stopped at the 400 and 600 series, and that's sad.  I'll still buy those models for trade fodder or what have you, but they are the ONLY Gerbers I'll even touch, dated as they may be.  What is Gerber management thinking?  "Oh boy, lets make a couple really nice tools here in the US but make sure the rest of our line is imported junk made to low standards, yeah that'll work great, we'll make a fortune!"  <img src="/assets/uploads/smileys/drool.gif" alt=":drool:" title="drool" class="forum-smiley emoji" /> Don't they realize that a few crappy tools with their name on them sours buyers on the whole line?  I hope Leatherman avoids this pitfall with their new offerings for 2011, cheap is not always good, companies used to realize that one quality product purchased from them would lead to others.  I bought my first Leatherman like four years ago,  a Charge TTi, after seeing a friends, and now I own over 20 Leathermans because I was impressed by that first one I handled.  It wasn't the price that impressed me, it was quality   <img src="/assets/uploads/smileys/rant.gif" alt=":rant:" title="rant!" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/topic/26015/bye-bye-gerber</link><generator>RSS for Node</generator><lastBuildDate>Tue, 17 Nov 2026 12:26:32 GMT</lastBuildDate><atom:link href="https://multitool.ninja/topic/26015.rss" rel="self" type="application/rss+xml"/><pubDate>Mon, 14 Feb 2011 16:18:45 GMT</pubDate><ttl>60</ttl><item><title><![CDATA[Reply to Bye bye Gerber! on Sat, 16 Apr 2011 09:31:04 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/gareth" aria-label="Profile: Gareth">@<bdi>Gareth</bdi></a> <a href="/post/482329">said</a>:<br />
I've not owned either the Splice or Vice but I do remember picking one up and not being impressed. :-\  Gerber do seem to have such wide variation in what they see as acceptable; From the abysmal Suspension (<strong>that I wouldn't touch with 50ft's boat poll</strong>) through to the nicely designed and decent quality MP400 and 600 etc.</p>
</blockquote>
<p dir="auto"><img src="/assets/uploads/smileys/rofl.gif" alt=":rofl:" title="rofl" class="forum-smiley emoji" /> I actually bought my Suspension for use at the boat - I was young and naive back then  :P</p>
<p dir="auto">It's good to hear someone still praising the 400 &amp; 600 (seen as I have one coming) despite their apparently continual descent into poor quality. It's wierd really. Such good designs and poor quality - it's like they're making cheap knockoffs of THEIR OWN GEAR. If only they'd look at producing a PRO range of each of their designs. Standard cheapo model at Joe Bloggs friendly prices, and a superior properly made version for those who expect more from a tool</p>
]]></description><link>https://multitool.ninja/post/482805</link><guid isPermaLink="true">https://multitool.ninja/post/482805</guid><dc:creator><![CDATA[AimlessWanderer]]></dc:creator><pubDate>Sat, 16 Apr 2011 09:31:04 GMT</pubDate></item><item><title><![CDATA[Reply to Bye bye Gerber! on Sat, 16 Apr 2011 03:19:24 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/slackone" aria-label="Profile: SlackOne">@<bdi>SlackOne</bdi></a> <a href="/post/467133">said</a>:<br />
I'm solidly of the opinion that Gerber has great designers.  Unfortunately somewhere between the designers and the consumers stands the accountant.</p>
</blockquote>
<p dir="auto">Wow! I've met the great Gerber designers, and I believe your statement is incredibly accurate. <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /> (unfortunately) :-\</p>
]]></description><link>https://multitool.ninja/post/482720</link><guid isPermaLink="true">https://multitool.ninja/post/482720</guid><dc:creator><![CDATA[J-sews]]></dc:creator><pubDate>Sat, 16 Apr 2011 03:19:24 GMT</pubDate></item><item><title><![CDATA[Reply to Bye bye Gerber! on Sat, 16 Apr 2011 03:17:16 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/gareth" aria-label="Profile: Gareth">@<bdi>Gareth</bdi></a> <a href="/post/482450">said</a>:</p>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/chako" aria-label="Profile: Chako">@<bdi>Chako</bdi></a> <a href="/post/482412">said</a>:</p>
<blockquote>
<p dir="auto">Gerber produced the Radius to prove a point...that they could make a Gerber Suspension look good in comparison.  <img src="/assets/uploads/smileys/rofl.gif" alt=":rofl:" title="rofl" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">Wow, I'd actually managed to block out the existence of the radius.  Horrible, horrible tool.<img src="http://fc03.deviantart.net/fs71/f/2010/216/3/8/Shudder_by_zakarranda.gif" alt="" class="img-markdown  img-fluid" /></p>
</blockquote>
<p dir="auto">Indeed :P</p>
]]></description><link>https://multitool.ninja/post/482717</link><guid isPermaLink="true">https://multitool.ninja/post/482717</guid><dc:creator><![CDATA[J-sews]]></dc:creator><pubDate>Sat, 16 Apr 2011 03:17:16 GMT</pubDate></item><item><title><![CDATA[Reply to Bye bye Gerber! on Fri, 15 Apr 2011 06:19:05 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/chako" aria-label="Profile: Chako">@<bdi>Chako</bdi></a> <a href="/post/482412">said</a>:<br />
Gerber produced the Radius to prove a point...that they could make a Gerber Suspension look good in comparison.  <img src="/assets/uploads/smileys/rofl.gif" alt=":rofl:" title="rofl" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">Wow, I'd actually managed to block out the existence of the radius.  Horrible, horrible tool.<img src="http://fc03.deviantart.net/fs71/f/2010/216/3/8/Shudder_by_zakarranda.gif" alt="" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/482450</link><guid isPermaLink="true">https://multitool.ninja/post/482450</guid><dc:creator><![CDATA[Gareth]]></dc:creator><pubDate>Fri, 15 Apr 2011 06:19:05 GMT</pubDate></item><item><title><![CDATA[Reply to Bye bye Gerber! on Fri, 15 Apr 2011 01:14:56 GMT]]></title><description><![CDATA[<p dir="auto">Gerber produced the Radius to prove a point...that they could make a Gerber Suspension look good in comparison.  <img src="/assets/uploads/smileys/rofl.gif" alt=":rofl:" title="rofl" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/482412</link><guid isPermaLink="true">https://multitool.ninja/post/482412</guid><dc:creator><![CDATA[Chako]]></dc:creator><pubDate>Fri, 15 Apr 2011 01:14:56 GMT</pubDate></item><item><title><![CDATA[Reply to Bye bye Gerber! on Thu, 14 Apr 2011 16:42:30 GMT]]></title><description><![CDATA[<p dir="auto">I've not owned either the Splice or Vice but I do remember picking one up and not being impressed. :-\  Gerber do seem to have such wide variation in what they see as acceptable; From the abysmal Suspension (that I wouldn't touch with 50ft's boat poll) through to the nicely designed and decent quality MP400 and 600 etc.</p>
]]></description><link>https://multitool.ninja/post/482329</link><guid isPermaLink="true">https://multitool.ninja/post/482329</guid><dc:creator><![CDATA[Gareth]]></dc:creator><pubDate>Thu, 14 Apr 2011 16:42:30 GMT</pubDate></item><item><title><![CDATA[Reply to Bye bye Gerber! on Thu, 14 Apr 2011 12:07:36 GMT]]></title><description><![CDATA[<p dir="auto">I've got my first "proper" Gerber coming soon, a 600 DET. I'm interested to see what the quality is going to be like on this. To be honest the plier heads are not in keeping with what I need from a tool, and am thinking about swapping them out for the shears from a Paul Chen Multitasker - I think the mix of those big shears with the rest of the toolset should make for a very interesting combo</p>
]]></description><link>https://multitool.ninja/post/482287</link><guid isPermaLink="true">https://multitool.ninja/post/482287</guid><dc:creator><![CDATA[AimlessWanderer]]></dc:creator><pubDate>Thu, 14 Apr 2011 12:07:36 GMT</pubDate></item><item><title><![CDATA[Reply to Bye bye Gerber! on Thu, 14 Apr 2011 09:27:21 GMT]]></title><description><![CDATA[<p dir="auto">i just bought the splice, i didnt pick up the vise becouse from the box it looked like sh*t plus there was noise coming out of it,the pliers didnt match that mean one side was bigger than the other , the finish looked like it was meant to be "made in china" there were sharp edges all around<br />
now i took the splice just because i sayed i wanted to try a gerber<br />
i have the spice for one day now and you can notice the deference between it and the leatherman its like the difference between toyota civic (the old ones) and a new bmw 3 :S<br />
i heard something that cheered me up a bit that i can return the splice add money and get a beter gerber that mean they will give me back 100% of the product's price so i can buy a new one<br />
although its not that good the fact that i can get a better gerber in the future make it not suck as bad:S</p>
]]></description><link>https://multitool.ninja/post/482278</link><guid isPermaLink="true">https://multitool.ninja/post/482278</guid><dc:creator><![CDATA[kareem]]></dc:creator><pubDate>Thu, 14 Apr 2011 09:27:21 GMT</pubDate></item><item><title><![CDATA[Reply to Bye bye Gerber! on Fri, 18 Feb 2011 03:47:07 GMT]]></title><description><![CDATA[<p dir="auto">My old multiplier was great. Solid, well built, and clever.</p>
<p dir="auto">My Pro Scout was the same.</p>
<p dir="auto">So I figured a Diesel would be wonderful. Boy was I wrong. The blade tip broke off when I cut a small zip tie.. The Phillips driver stripped out the first time I used it.. It also just plain felt cheaper than my old Gerbers that I loved.</p>
<p dir="auto">I'd carried a ST200 in between the Pro Scout and Diesel. It was an undeniable step up in quality, if not a step back in clever design.</p>
<p dir="auto">I wound up modding it into a Diesel/Scout combo out of parts from each (my scout was trashed anyway). Even that was not enough to keep the ST200 off my belt. It just felt solid and I knew it was tough.</p>
<p dir="auto">I'm not done with Gerber. I carry my EAB every day as a money clip and just love it. But I won't buy another MT from them. Not without some serious persuading via reviews. I rarely even stop in here, so low is my interest in Gerber.</p>
<p dir="auto">I used to champion them back when I had my first two. Now? The opposite.</p>
<p dir="auto">Hear that Gerber? You lost a vocal fan and turned him into a vocal opponent.</p>
<p dir="auto">Quality. That is the final word for me. Gerber is not a name associated with quality. You take a chance anytime you buy something with their name on it.</p>
<p dir="auto">The EAB is exceptional. But even it had to be recalled at first. Too bad.</p>
]]></description><link>https://multitool.ninja/post/467260</link><guid isPermaLink="true">https://multitool.ninja/post/467260</guid><dc:creator><![CDATA[glorn]]></dc:creator><pubDate>Fri, 18 Feb 2011 03:47:07 GMT</pubDate></item><item><title><![CDATA[Reply to Bye bye Gerber! on Thu, 17 Feb 2011 19:51:15 GMT]]></title><description><![CDATA[<p dir="auto">I still have some hope that they will be getting better in the future, but I am willing to bet that no.</p>
<p dir="auto">Shame to. Some of the stuff looks good, but unfortunatly they just seem to junk it up in construction. However we all know accountants jsut care about the bottom line, and it seems the rest of them there see it the same way. Profit over quality.</p>
]]></description><link>https://multitool.ninja/post/467175</link><guid isPermaLink="true">https://multitool.ninja/post/467175</guid><dc:creator><![CDATA[hawkchucker]]></dc:creator><pubDate>Thu, 17 Feb 2011 19:51:15 GMT</pubDate></item><item><title><![CDATA[Reply to Bye bye Gerber! on Thu, 17 Feb 2011 17:35:38 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/slackone" aria-label="Profile: SlackOne">@<bdi>SlackOne</bdi></a> <a href="/post/467133">said</a>:<br />
I'm solidly of the opinion that Gerber has great designers.  Unfortunately somewhere between the designers and the consumers stands the accountant.</p>
</blockquote>
<p dir="auto">:D</p>
<p dir="auto">Sadly you might be right though. ::)</p>
]]></description><link>https://multitool.ninja/post/467138</link><guid isPermaLink="true">https://multitool.ninja/post/467138</guid><dc:creator><![CDATA[Gareth]]></dc:creator><pubDate>Thu, 17 Feb 2011 17:35:38 GMT</pubDate></item><item><title><![CDATA[Reply to Bye bye Gerber! on Thu, 17 Feb 2011 17:19:57 GMT]]></title><description><![CDATA[<p dir="auto">I'm solidly of the opinion that Gerber has great designers.  Unfortunately somewhere between the designers and the consumers stands the accountant.</p>
]]></description><link>https://multitool.ninja/post/467133</link><guid isPermaLink="true">https://multitool.ninja/post/467133</guid><dc:creator><![CDATA[SlackOne]]></dc:creator><pubDate>Thu, 17 Feb 2011 17:19:57 GMT</pubDate></item><item><title><![CDATA[Reply to Bye bye Gerber! on Thu, 17 Feb 2011 04:15:33 GMT]]></title><description><![CDATA[<p dir="auto">It's true they innovate with things like the replaceable carbide cutters and blade exchanger ect. no denying that, but the quality of these last imported tools I bought was just horrible.  No Leatherman, SOG, or Vic I ever bought has been anywhere near that junky.  I mean you can argue about the features you like or hate on this Leatherman or that SOG ect. but I would grab any smaller tool from those makers, like say a Skeletool, Kick, or SOG PPP, or Vic Spirit and not be afraid to deploy the blade and cut up a larger cardboard box, something I do often at my job.  But I would be afraid to do that with the Crucial FAST or Octane, as I just don't think the blades would take it, especially the Octane, as the little nubbin the back of the blade bears against when you cut is very small and weak compared to how the blade locks up on the competing tools I mentioned.  The Octane's internal tools and pliers were not bad (except the anvil wire cutters which totally suck).  It had the potential to be a great tool.  Too bad they couldn't integrate the blade inside the tool like on a 400 or 600 so it would lock up solidly.   And yes, Leatherman seems to be taking cosmetic cues from Gerber with their new tools coming out this fall, I just hope they don't also copy Gerber's imported tool construction quality.   :P</p>
]]></description><link>https://multitool.ninja/post/467031</link><guid isPermaLink="true">https://multitool.ninja/post/467031</guid><dc:creator><![CDATA[Marlinaholic]]></dc:creator><pubDate>Thu, 17 Feb 2011 04:15:33 GMT</pubDate></item><item><title><![CDATA[Reply to Bye bye Gerber! on Thu, 17 Feb 2011 03:38:04 GMT]]></title><description><![CDATA[<p dir="auto">There is still some good stuff but the octane is too thin in the liner lock</p>
]]></description><link>https://multitool.ninja/post/467018</link><guid isPermaLink="true">https://multitool.ninja/post/467018</guid><dc:creator><![CDATA[scrappy]]></dc:creator><pubDate>Thu, 17 Feb 2011 03:38:04 GMT</pubDate></item><item><title><![CDATA[Reply to Bye bye Gerber! on Wed, 16 Feb 2011 17:39:48 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/pacu" aria-label="Profile: Pacu">@<bdi>Pacu</bdi></a> <a href="/post/466717">said</a>:<br />
anyone think the diesel is up to snuff? I haven't played with one yet...but if its like the 400/600 id buy that for a dollar. :D</p>
</blockquote>
<p dir="auto">I've only played with one for a few minutes but initial impressions were OK.  My friend, who owns it, swears it's better than any other MT out there, thought I think that's going a bit far IMO. :D  Myself I'd say it's not got a great leg up on the MP600, but if I found one for a good price I'd certainly think about it.</p>
]]></description><link>https://multitool.ninja/post/466839</link><guid isPermaLink="true">https://multitool.ninja/post/466839</guid><dc:creator><![CDATA[Gareth]]></dc:creator><pubDate>Wed, 16 Feb 2011 17:39:48 GMT</pubDate></item><item><title><![CDATA[Reply to Bye bye Gerber! on Wed, 16 Feb 2011 01:57:56 GMT]]></title><description><![CDATA[<p dir="auto">anyone think the diesel is up to snuff? I haven't played with one yet...but if its like the 400/600 id buy that for a dollar. :D</p>
]]></description><link>https://multitool.ninja/post/466717</link><guid isPermaLink="true">https://multitool.ninja/post/466717</guid><dc:creator><![CDATA[Pacu]]></dc:creator><pubDate>Wed, 16 Feb 2011 01:57:56 GMT</pubDate></item><item><title><![CDATA[Reply to Bye bye Gerber! on Wed, 16 Feb 2011 01:54:55 GMT]]></title><description><![CDATA[<p dir="auto">I cant even believe I am going to Gerbers defence. But to play devils advocate... You can still get some decent gerber stuff. Most of the new stuff is kinda junky but really think about it.</p>
<p dir="auto">You can allways buy a.......... or you can ..........</p>
<p dir="auto">Aww forget it I got nothing.</p>
<p dir="auto">But remember there is great old tools still out there. Just trade for the old stuff and leave the new stuff alone if ya wnat.</p>
]]></description><link>https://multitool.ninja/post/466715</link><guid isPermaLink="true">https://multitool.ninja/post/466715</guid><dc:creator><![CDATA[hawkchucker]]></dc:creator><pubDate>Wed, 16 Feb 2011 01:54:55 GMT</pubDate></item><item><title><![CDATA[Reply to Bye bye Gerber! on Tue, 15 Feb 2011 01:49:55 GMT]]></title><description><![CDATA[<p dir="auto">No manufacturer gets it all right all the time. In general the multitool Gerber lineup doesn't do much for me but there are still some that I would like to try out like the Grappler and the Octane.</p>
]]></description><link>https://multitool.ninja/post/466453</link><guid isPermaLink="true">https://multitool.ninja/post/466453</guid><dc:creator><![CDATA[Crouton]]></dc:creator><pubDate>Tue, 15 Feb 2011 01:49:55 GMT</pubDate></item><item><title><![CDATA[Reply to Bye bye Gerber! on Tue, 15 Feb 2011 01:32:25 GMT]]></title><description><![CDATA[<p dir="auto">I like Gerbers. They are my second highest metal count after Leatherman in numbers.</p>
]]></description><link>https://multitool.ninja/post/466447</link><guid isPermaLink="true">https://multitool.ninja/post/466447</guid><dc:creator><![CDATA[Chako]]></dc:creator><pubDate>Tue, 15 Feb 2011 01:32:25 GMT</pubDate></item><item><title><![CDATA[Reply to Bye bye Gerber! on Mon, 14 Feb 2011 22:47:03 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto">@Grant Lamontagne <a href="/post/466415">said</a>:<br />
Thanks Gareth- I knew there was something else I was forgetting!  :D</p>
<p dir="auto">Def</p>
</blockquote>
<p dir="auto">Actually the credit goes to Roadie for pointing it out in another thread not too long ago. :D</p>
]]></description><link>https://multitool.ninja/post/466416</link><guid isPermaLink="true">https://multitool.ninja/post/466416</guid><dc:creator><![CDATA[Gareth]]></dc:creator><pubDate>Mon, 14 Feb 2011 22:47:03 GMT</pubDate></item><item><title><![CDATA[Reply to Bye bye Gerber! on Mon, 14 Feb 2011 22:45:15 GMT]]></title><description><![CDATA[<p dir="auto">Thanks Gareth- I knew there was something else I was forgetting!  :D</p>
<p dir="auto">Def</p>
]]></description><link>https://multitool.ninja/post/466415</link><guid isPermaLink="true">https://multitool.ninja/post/466415</guid><dc:creator><![CDATA[Grant Lamontagne]]></dc:creator><pubDate>Mon, 14 Feb 2011 22:45:15 GMT</pubDate></item><item><title><![CDATA[Reply to Bye bye Gerber! on Mon, 14 Feb 2011 22:44:41 GMT]]></title><description><![CDATA[<p dir="auto">I do like my ole 400/600 Gerbers. I remember back in the early 90s while in scouts Gerber was held in high regards with their Legendary Blades. Thier knives were great..the gator, LMF, BMF, mark 2, gatormate and the 400 (knife). When you bought one you knew you spent your money wisely. Fast Forward to 2011....man o man have they lost their way. Why throw money away when there are so many other proven quality builders out there? Abandon all hope all ye who enter here. :P<br />
I understand you gotta go to China these days to turn a profit but look at Byrds quality. My Cara Cara and Meadowlark are both well built.</p>
<p dir="auto">CRKT- great knives, there's always Buck, Case, Kershaw is real good....not too pricey.</p>
]]></description><link>https://multitool.ninja/post/466414</link><guid isPermaLink="true">https://multitool.ninja/post/466414</guid><dc:creator><![CDATA[Pacu]]></dc:creator><pubDate>Mon, 14 Feb 2011 22:44:41 GMT</pubDate></item><item><title><![CDATA[Reply to Bye bye Gerber! on Mon, 14 Feb 2011 22:35:21 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto">@Grant Lamontagne <a href="/post/466411">said</a>:<br />
I read this with mixed feelings- yes, Gerber has made their bed with some crappy tools, but I think they are coming around, and deserve some credit for it.  Besides, who else has produced a tool as cool as this?</p>
<p dir="auto">And, let's not forget that there's also a few other things we are forgetting- the replaceable cutters everyone likes so much on the LM ST300 and MUT were originally a Gerber concept.  And, how many people likened the new Leatehrman tools to Gerbers, in looks as well as in concept?</p>
<p dir="auto">Crap on Gerber if you will- it's your choice what you buy, but let's at least make sure to give credit where it's due.  Gerber has contributed significantly to the multitool industry as a whole, and we should at least appreciate them for that.</p>
<p dir="auto">Def</p>
</blockquote>
<p dir="auto">Agreed.  The Gerber line may have it's flaws but it's a long way from all bad.  Oh and in addition to the replaceable wire cutters they also came out with the saw blade exchanger on the 800 Legend five years before it was to be found on the Surge.</p>
]]></description><link>https://multitool.ninja/post/466413</link><guid isPermaLink="true">https://multitool.ninja/post/466413</guid><dc:creator><![CDATA[Gareth]]></dc:creator><pubDate>Mon, 14 Feb 2011 22:35:21 GMT</pubDate></item><item><title><![CDATA[Reply to Bye bye Gerber! on Mon, 14 Feb 2011 22:21:40 GMT]]></title><description><![CDATA[<p dir="auto">I'm kinda done with Gerber as well.  I finally got my MP400 back from warranty last week and comparing it to the Sog Pocket PowerPlier that I got from David Bowen in the meantime... well, if I ever need OHO pliers I'll probably get another SOG.  Quality wise there was no comparison, even if the PPP doesn't have locking tools.  Ended up selling the MP400 after three days of having it back.</p>
<p dir="auto">Sorry Gerber, I gave you two chances with full-size tools and twice you let me down.  No more money for you.</p>
]]></description><link>https://multitool.ninja/post/466412</link><guid isPermaLink="true">https://multitool.ninja/post/466412</guid><dc:creator><![CDATA[jekostas]]></dc:creator><pubDate>Mon, 14 Feb 2011 22:21:40 GMT</pubDate></item></channel></rss>