<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0"><channel><title><![CDATA[Large EDC Pouch making]]></title><description><![CDATA[<p dir="auto"><strong>My EDC Toolbox Pouch</strong></p>
<p dir="auto">I was looking for a pouch to carry two Leathermans with all accessories, a knife, pen and a flashlight. I wanted one that I can remove from my belt to put down in front of me or next to me when I am working on something that requires several accessories.<br />
I could not find what I want in any shop or online.</p>
<p dir="auto">I made one today and it took me about six hours to make. &lt;u&gt;<strong>I will never, ever make one for anybody else as it involved too much work</strong>&lt;/u&gt;, however the pleasure to own something that no-one else has is good. I only took some photographs of how I did it with a very brief explanation. You have to work the rest out for yourself. I am not an authority on sewing or any of the methods, but what I have done worked and the durability (not workmanship at all!!) is superior because I used superglue on the edges’s sewing and I doubled sew where there are stress points. If you count in the decorative edging the sewing is three times.</p>
<p dir="auto">The whole pouch was made by using a flat bed sewing machine. Quite a percentage of the sewing was done by cranking the wheel by hand because of the thickness of the material.</p>
<p dir="auto">First I needed a belt clip (metal of choice) because I need to remove the pouch from my belt. At work I am wearing a 55 mm wide belt as I am a police officer by occupation, and if you feel the setup (two multitools) is too heavy, it is still lighter than my side arm that I don’t carry any more on duty, unless I doing crime prevention duties.<br />
<img src="http://i798.photobucket.com/albums/yy261/Boerseun1/Pouch-01/IMG_1517.jpg" alt="" class="img-markdown  img-fluid" /><br />
Here is three clips. The top two are salvaged from old holsters and pouches. The bottom one is a brand new one. I chose the centre one because of the width of my belt. If I use any of the shorter ones it can slide of when you sit in a car. The centre type hooks on below the belt. Depending on what type you choose, you have to make the fastening to the pouch according to the clip design.</p>
<p dir="auto">The pouch is made of glass fibre reinforced PVC and 600 Cordura. 400 X 90 mm sizes each:<br />
<img src="http://i798.photobucket.com/albums/yy261/Boerseun1/Pouch-01/IMG_1520.jpg" alt="" class="img-markdown  img-fluid" /><br />
You can change the dimensions according to your own needs.</p>
<p dir="auto">The pieces are glued together with contact adhesive:<br />
<img src="http://i798.photobucket.com/albums/yy261/Boerseun1/Pouch-01/IMG_1516.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Here is my sewing machine:<br />
<img src="http://i798.photobucket.com/albums/yy261/Boerseun1/Pouch-01/IMG_1523.jpg" alt="" class="img-markdown  img-fluid" /><br />
I keep a few full bobbins ready. Below right you can see that the motor is stepped down to make it a bit slower and more controllable.</p>
<p dir="auto">Next I bought a length of 80 mm wide elastic band. Buy the best and thickest you can get. Cheap types will lose its stretch soon. Mark 6 pieces of 62 mm each so that they can stretch side ways. The height will of course be 80 mm:<br />
<img src="http://i798.photobucket.com/albums/yy261/Boerseun1/Pouch-01/IMG_1522.jpg" alt="" class="img-markdown  img-fluid" /><br />
Cut them at the white marks.</p>
<p dir="auto">Take a narrow and thin webbing of 50 mm long (X2) and melt the edges with a flame:<br />
<img src="http://i798.photobucket.com/albums/yy261/Boerseun1/Pouch-01/IMG_1525.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Fold double and stitch it on a piece of elastic each:<br />
<img src="http://i798.photobucket.com/albums/yy261/Boerseun1/Pouch-01/IMG_1528.jpg" alt="" class="img-markdown  img-fluid" /><br />
Here I did the same as the Leatherman and LED Lenser pouches.</p>
<p dir="auto">The two pieces with the grabbing handle attached:<br />
<img src="http://i798.photobucket.com/albums/yy261/Boerseun1/Pouch-01/IMG_1529.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Here I have sewed three pieces of elastic together, times two:<br />
<img src="http://i798.photobucket.com/albums/yy261/Boerseun1/Pouch-01/IMG_1532.jpg" alt="" class="img-markdown  img-fluid" /><br />
I have stitched both sides 5 mm from the sides and reversed started and reverse ended both sides on both sets.</p>
<p dir="auto">First I copy the original clip’s back piece from leather, backed with the reinforced pvc:<br />
<img src="http://i798.photobucket.com/albums/yy261/Boerseun1/Pouch-01/IMG_1533.jpg" alt="" class="img-markdown  img-fluid" /><br />
The left hand side is the bottom and the right hand side is the top of the finished holster’s back side. The top of the back piece must be 150 mm from the top and it must be sewed three times – on the cordura side. Use superglue on the corners of the stitching.</p>
<p dir="auto">Now I have cut two lengths of elastic of 140 mm long:<br />
<img src="http://i798.photobucket.com/albums/yy261/Boerseun1/Pouch-01/IMG_1534.jpg" alt="" class="img-markdown  img-fluid" /><br />
I have marked them 35 mm and then 5 mm from each side.</p>
<p dir="auto">Now I folded both sides onto the inner line bit stitched it along the 35 mm line:<br />
<img src="http://i798.photobucket.com/albums/yy261/Boerseun1/Pouch-01/IMG_1535.jpg" alt="" class="img-markdown  img-fluid" /><br />
I then flipped it upside down and stitched it onto the 400 X 90 mm piece, on the inner side, also 150 mm from the top. Stitch over the visible sewing and reverse stitch on both sides for strength, on top and bottom. Use superglue o strengthen stitching ends – this will prevent tearing or sewing getting loose. This is the first inside pouch for example the bit sheaths and two pens or something similar.</p>
<p dir="auto">Now You mark it 50 mm, 40 mm, 40 mm &amp; 20 mm from the sewed-on elastic’s edge and cut off.<br />
Glue on a 40 mm wide strip of hook on the cordura (outside) side and stitch around.</p>
<p dir="auto">Take another piece of 90 mm elastic:<br />
<img src="http://i798.photobucket.com/albums/yy261/Boerseun1/Pouch-01/IMG_1542.jpg" alt="" class="img-markdown  img-fluid" /><br />
The centre piece of webbing is 38 mm with hook on and on the right is also elastic that stretches in this photograph from top to bottom. The webbing is properly stitched on and then cut off along the white line, 10 mm from the bottom.</p>
<p dir="auto">Be very careful now. Not negotiatable:<br />
<img src="http://i798.photobucket.com/albums/yy261/Boerseun1/Pouch-01/IMG_1543.jpg" alt="" class="img-markdown  img-fluid" /><br />
This piece of elastic is sewed on below the 50 mm line but covered with a strip of edging material for cosmetic appearance. The stitching nearest to the hook parts must still be below the 50 mm line.</p>
<p dir="auto">This will show what I meant:<br />
<img src="http://i798.photobucket.com/albums/yy261/Boerseun1/Pouch-01/IMG_1544.jpg" alt="" class="img-markdown  img-fluid" /><br />
It is now bent over and still clears the 50 mm line.</p>
<p dir="auto">Next the clip belt:<br />
<img src="http://i798.photobucket.com/albums/yy261/Boerseun1/Pouch-01/IMG_1545.jpg" alt="" class="img-markdown  img-fluid" /><br />
This webbing is 10 or 12 mm wide (may be different depending on size of clip). This may even be left out. Or the hook and loop, depending on you preferences. It is then stitched and covered by a piece of edging for cosmetic purposes.</p>
<p dir="auto">Now the next inner sleeve will be done:<br />
<img src="http://i798.photobucket.com/albums/yy261/Boerseun1/Pouch-01/IMG_1547.jpg" alt="" class="img-markdown  img-fluid" /><br />
The work is turned over and the next piece of elastic is placed on the 50 mm line and stitched on both sides, exactly as the previous one. The previous two parts are folded away so that you do not stitch them where you don’t want to.</p>
<p dir="auto">The other side:<br />
<img src="http://i798.photobucket.com/albums/yy261/Boerseun1/Pouch-01/IMG_1548.jpg" alt="" class="img-markdown  img-fluid" />.<br />
The work piece is now getting complicated.</p>
<p dir="auto">Now the two pieces of elastic stacks should be fetched:<br />
<img src="http://i798.photobucket.com/albums/yy261/Boerseun1/Pouch-01/IMG_1549.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Just to show how the elastic pen sleeves should be folded:<br />
<img src="http://i798.photobucket.com/albums/yy261/Boerseun1/Pouch-01/IMG_1550.jpg" alt="" class="img-markdown  img-fluid" /><br />
The photograph is blurry. Compare the top to the bottom.</p>
<p dir="auto">Another view:<br />
<img src="http://i798.photobucket.com/albums/yy261/Boerseun1/Pouch-01/IMG_1551.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Glue on and stitch two times, superglue.<br />
<img src="http://i798.photobucket.com/albums/yy261/Boerseun1/Pouch-01/IMG_1552.jpg" alt="" class="img-markdown  img-fluid" /><br />
Remember to reverse stitch each end at least 25 mm and stitch two times. This is really load bearing stitching. Don’t worry about appearance now. The left hand side is finished and the right hand side is hold with a pin prior to gluing.</p>
<p dir="auto">Here you have a better view:<br />
<img src="http://i798.photobucket.com/albums/yy261/Boerseun1/Pouch-01/IMG_1553.jpg" alt="" class="img-markdown  img-fluid" /><br />
The stitching is upon the previous stitching of the stack, 5 mm from the edge. Evenly and thorough. Note: the handle strip must be on the outside.</p>
<p dir="auto">A better 3D view (blurry):<br />
<img src="http://i798.photobucket.com/albums/yy261/Boerseun1/Pouch-01/IMG_1554.jpg" alt="" class="img-markdown  img-fluid" /><br />
Here you can see the reason behind the inner sleeve’s construction. If I let it continue together with the stack, it would have been too thick for my sewing machine. I believe it also is less stress on the sides.</p>
<p dir="auto">The stitching must go through everything:<br />
<img src="http://i798.photobucket.com/albums/yy261/Boerseun1/Pouch-01/IMG_1555.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Both sides:<br />
<img src="http://i798.photobucket.com/albums/yy261/Boerseun1/Pouch-01/IMG_1556.jpg" alt="" class="img-markdown  img-fluid" /><br />
This is the bottom part that gives you an idea where I am getting to. I am fitting four pen sleeves: for pens, long sharpener sticks, and a ”pen size: holder of oil, or a bundle of cable ties, a spare battery for the flashlight, etc.</p>
<p dir="auto">Another view:<br />
<img src="http://i798.photobucket.com/albums/yy261/Boerseun1/Pouch-01/IMG_1557.jpg" alt="" class="img-markdown  img-fluid" /><br />
Yes, you are right. I made a small mistake. The handle is on the inside on the left, but now I will use as a default the outer side first so that I will need the handle only if I need the second sleeve. I am currently using only one sleeve per side, but rather have it when you don’t need it as don’t have when you need it. The Leatherman and Led Lenzer pouches only have two layers of elastic in the side stacks but I have decided to add a third.</p>
<p dir="auto">Now it is the time to add edging to as near as possible to the other sides inner sleeve:<br />
<img src="http://i798.photobucket.com/albums/yy261/Boerseun1/Pouch-01/IMG_1558.jpg" alt="" class="img-markdown  img-fluid" /><br />
The left hand side is enough to reach the end not shown in the photograph, but the right hand side is longer to go right around and to overlap by at least 25 mm. Rather make it longer and cut away what you don’t need.</p>
<p dir="auto">The view:<br />
<img src="http://i798.photobucket.com/albums/yy261/Boerseun1/Pouch-01/IMG_1559.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Now attach the elastic stacks to the opposite sides:<br />
<img src="http://i798.photobucket.com/albums/yy261/Boerseun1/Pouch-01/IMG_1560.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">It missed the backing piece for the clip:<br />
<img src="http://i798.photobucket.com/albums/yy261/Boerseun1/Pouch-01/IMG_1561.jpg" alt="" class="img-markdown  img-fluid" /><br />
Even the inner sleeve stitching misses it.</p>
<p dir="auto">Now stitches on the female side of the clip:<br />
<img src="http://i798.photobucket.com/albums/yy261/Boerseun1/Pouch-01/IMG_1562.jpg" alt="" class="img-markdown  img-fluid" /><br />
On the outside and approximately as shown.</p>
<p dir="auto">Add decorative edging:<br />
<img src="http://i798.photobucket.com/albums/yy261/Boerseun1/Pouch-01/IMG_1563.jpg" alt="" class="img-markdown  img-fluid" /><br />
The appearance is much neater.</p>
<p dir="auto">Now add 90 mm high loop to the inside:<br />
<img src="http://i798.photobucket.com/albums/yy261/Boerseun1/Pouch-01/IMG_1564.jpg" alt="" class="img-markdown  img-fluid" /><br />
Glue and cut the edges round.</p>
<p dir="auto">Stitch:</p>
<p dir="auto"><img src="http://i798.photobucket.com/albums/yy261/Boerseun1/Pouch-01/IMG_1565.jpg" alt="" class="img-markdown  img-fluid" /><br />
Top and bottom. Superglue side ends of stitching.</p>
<p dir="auto">Why:<br />
<img src="http://i798.photobucket.com/albums/yy261/Boerseun1/Pouch-01/IMG_1566.jpg" alt="" class="img-markdown  img-fluid" /><br />
Now you can continue the stitching without having to stich inside the curves. Do the short edging first and overlap the second one.</p>
<p dir="auto">Finished:<br />
<img src="http://i798.photobucket.com/albums/yy261/Boerseun1/Pouch-01/IMG_1567.jpg" alt="" class="img-markdown  img-fluid" /><br />
The stitching is finished and the male clip is added.</p>
<p dir="auto">Almost finished:<br />
<img src="http://i798.photobucket.com/albums/yy261/Boerseun1/Pouch-01/IMG_1568.jpg" alt="" class="img-markdown  img-fluid" /><br />
Just the clip must be added.</p>
<p dir="auto">Added:<br />
<img src="http://i798.photobucket.com/albums/yy261/Boerseun1/Pouch-01/IMG_1569.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">My EDC:<br />
<img src="http://i798.photobucket.com/albums/yy261/Boerseun1/Pouch-01/IMG_1570.jpg" alt="" class="img-markdown  img-fluid" /><br />
Leatherman Surge and Supertool 300 and Wenger knife. Plastic and telescopic pens. P5 Led Lenser flashlight. Bit kit. DIY drill. Surge saw blades. Leatherman Universal adapter.<br />
No not too much items yet!!!!!</p>
<p dir="auto">The bit kits:<br />
<img src="http://i798.photobucket.com/albums/yy261/Boerseun1/Pouch-01/IMG_1571.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Saw blade with tow steel blades extra:<br />
<img src="http://i798.photobucket.com/albums/yy261/Boerseun1/Pouch-01/IMG_1572.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Saw blades and DIY Drill bit (with cover as it is super sharp):<br />
<img src="http://i798.photobucket.com/albums/yy261/Boerseun1/Pouch-01/IMG_1573.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Pens:<br />
<img src="http://i798.photobucket.com/albums/yy261/Boerseun1/Pouch-01/IMG_1574.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Knife and Flashlight:<br />
<img src="http://i798.photobucket.com/albums/yy261/Boerseun1/Pouch-01/IMG_1575.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Adapter:<br />
<img src="http://i798.photobucket.com/albums/yy261/Boerseun1/Pouch-01/IMG_1576.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Two Leathermans:<br />
<img src="http://i798.photobucket.com/albums/yy261/Boerseun1/Pouch-01/IMG_1577.jpg" alt="" class="img-markdown  img-fluid" /><br />
There is a piece of plastic to prevent them from rubbing against each other.</p>
<p dir="auto">Closed:<br />
<img src="http://i798.photobucket.com/albums/yy261/Boerseun1/Pouch-01/IMG_1578.jpg" alt="" class="img-markdown  img-fluid" /><br />
The clip will prevent accidental opening by rubbing against something. It can be adjusted.</p>
<p dir="auto">In my hand:<br />
<img src="http://i798.photobucket.com/albums/yy261/Boerseun1/Pouch-01/IMG_1579.jpg" alt="" class="img-markdown  img-fluid" /><br />
Not too big. A little bit wide.</p>
<p dir="auto">EDC:<br />
<img src="http://i798.photobucket.com/albums/yy261/Boerseun1/Pouch-01/IMG_1584.jpg" alt="" class="img-markdown  img-fluid" /><br />
Next to my cell phones:</p>
<p dir="auto">Double pouch:<br />
<img src="http://i798.photobucket.com/albums/yy261/Boerseun1/Pouch-01/IMG_1580.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i798.photobucket.com/albums/yy261/Boerseun1/Pouch-01/IMG_1581.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i798.photobucket.com/albums/yy261/Boerseun1/Pouch-01/IMG_1582.jpg" alt="" class="img-markdown  img-fluid" /><br />
One mobile is mine and the other one is my work mobile. Behind the black one is a sleeve like the Leatherman pouch and also on the sides. (Not used currently). This pouch led to the design of this pouch to carry two leathermans in one pouch. Months and months of browsing and visiting shops led nowhere. I decided to make my own and this is the result.</p>
<p dir="auto">Con:<br />
Take too long to make.<br />
Appearance can be better.<br />
I forgot to make the inside with a hook and loop divider like the camera bags.</p>
<p dir="auto">Pros:<br />
Super strong and super strong stitching.<br />
Metal belt clip.<br />
Clip secure against loss.<br />
Everything in one pouch.<br />
Pouch can be removed from belt as stated without having to loosen belt. Helps when I carry a firearm at work.<br />
Enough inside sleeves.</p>
]]></description><link>https://multitool.ninja/topic/27112/large-edc-pouch-making</link><generator>RSS for Node</generator><lastBuildDate>Wed, 18 Nov 2026 16:45:22 GMT</lastBuildDate><atom:link href="https://multitool.ninja/topic/27112.rss" rel="self" type="application/rss+xml"/><pubDate>Wed, 30 Mar 2011 20:49:06 GMT</pubDate><ttl>60</ttl><item><title><![CDATA[Reply to Large EDC Pouch making on Tue, 19 Jul 2011 11:13:32 GMT]]></title><description><![CDATA[<p dir="auto">See my follow-up post under the heading:</p>
<p dir="auto"><strong>My EDC Pounch for Everyday Carry Capability (EDC2)</strong></p>
]]></description><link>https://multitool.ninja/post/502662</link><guid isPermaLink="true">https://multitool.ninja/post/502662</guid><dc:creator><![CDATA[Jors]]></dc:creator><pubDate>Tue, 19 Jul 2011 11:13:32 GMT</pubDate></item><item><title><![CDATA[Reply to Large EDC Pouch making on Sat, 09 Jul 2011 07:30:55 GMT]]></title><description><![CDATA[<p dir="auto">Any chance of some pictures of the changes?  I'll admit that I can barely sew on a button, so the chances of me ever trying something so ambitious are nil, but I do love the fact you did it and did such great guide. <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/500218</link><guid isPermaLink="true">https://multitool.ninja/post/500218</guid><dc:creator><![CDATA[Gareth]]></dc:creator><pubDate>Sat, 09 Jul 2011 07:30:55 GMT</pubDate></item><item><title><![CDATA[Reply to Large EDC Pouch making on Sat, 09 Jul 2011 07:05:51 GMT]]></title><description><![CDATA[<p dir="auto">Since I have made it, I have changed the design a little bit:<br />
-the pouch is 5mm thicker<br />
-the pouch is now 10mm narrower (I now carry only the Surge and not the ST300 as well)<br />
-the elastick sleeve at the iside back is nou duplicated to the inside front as well - in the back sleeve is my bit kit cards (both) and in the front one is my wooden saw, 2 metal saw blades &amp; a home made drill as well as the long default screw driver bit of a MUT.<br />
-I have replaced the belt clip with a loop as the clip damaged my leather belt.<br />
This setup is a little heavy, but I have everything with me for edc2. I will never go back to anything else. The guys at work now know who to ask for help daily.<br />
I have evaluated the pouch for a few moths now and still I am satisfied and delighted with it. I have received a few requests to make it for others but I have turned it down. Too much work. It is however exactly the fulfillments of my need and I would honestly recommend it to everybody.</p>
<p dir="auto">During the past three months I haf two hernia operations and for a period of two weeks I did not carry the setup as I was mostly in bed or lying on the coach watching movies or on the pc. I felt naked. I am so used to carrying the pouch.</p>
<p dir="auto">I never once regretted the design. I am still using the setup after the chabges now for just over two months and this is my final design. I will however consider changing the design if I should ever upgrade my sewing machine to a cylinder bed design that can stitch thicker layers of material. The overall design will be the same but I will sew the inside pouch sleeves then in one go together with the side sleeves.</p>
<p dir="auto">I may one day try for a molle design but currently I do not have the need for it.</p>
<p dir="auto">Someone once commented on my design and said he would prefer the cutout on the one side so that he can carry a two cell AA flashlight. It can work, but I carry the one cell AA P5 Led Lenzer and currently I can not loose the flashlight. The flashlight is rather expensive for its size but worth it. It perfectly compliments my edc setup for edc2.</p>
]]></description><link>https://multitool.ninja/post/500214</link><guid isPermaLink="true">https://multitool.ninja/post/500214</guid><dc:creator><![CDATA[Jors]]></dc:creator><pubDate>Sat, 09 Jul 2011 07:05:51 GMT</pubDate></item><item><title><![CDATA[Reply to Large EDC Pouch making on Mon, 25 Apr 2011 13:42:29 GMT]]></title><description><![CDATA[<p dir="auto">I agree. The plastic pen is a piece of junk. It works for now. As soon as I get the opportunity I will get a short tactical pen or maybe I will turn one.</p>
]]></description><link>https://multitool.ninja/post/484807</link><guid isPermaLink="true">https://multitool.ninja/post/484807</guid><dc:creator><![CDATA[Jors]]></dc:creator><pubDate>Mon, 25 Apr 2011 13:42:29 GMT</pubDate></item><item><title><![CDATA[Reply to Large EDC Pouch making on Thu, 21 Apr 2011 22:28:30 GMT]]></title><description><![CDATA[<p dir="auto">I have the same Zebra pen, nice bit of kit IMO. <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/483955</link><guid isPermaLink="true">https://multitool.ninja/post/483955</guid><dc:creator><![CDATA[Gareth]]></dc:creator><pubDate>Thu, 21 Apr 2011 22:28:30 GMT</pubDate></item><item><title><![CDATA[Reply to Large EDC Pouch making on Thu, 21 Apr 2011 19:55:47 GMT]]></title><description><![CDATA[<p dir="auto">Great work, very nice pouch and really inspiring. I have to try to do something like that for my needs. Really great write up. The thing that I saw in your EDC that I find you could improve is the pen. The plastic pen to be exact. Have you heard of Zebra telescopic pens? They are just the size of the one you have but they expand to a full sized one. Here's a pic next to a Wenger SI like you have and a full size Parker Vector.</p>
<p dir="auto"><a href="http://cgi.ebay.com/2-ZEBRA-TELESCOPIC-PENS-METTALIC-BLUE-BEST-POCKET-PEN-/230571009139?pt=LH_DefaultDomain_0&amp;hash=item35af1a6473" rel="nofollow ugc">2-pack</a></p>
<p dir="auto"><a href="http://cgi.ebay.com/3-ZEBRA-TELESCOPIC-PENS-ORIGINAL-COLORS-GIFT-BOX-/230575137250?pt=LH_DefaultDomain_0&amp;hash=item35af5961e2" rel="nofollow ugc">3-pack</a></p>
<p dir="auto"><img src="http://i493.photobucket.com/albums/rr294/nickpong/P4210065.jpg" alt="" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/483937</link><guid isPermaLink="true">https://multitool.ninja/post/483937</guid><dc:creator><![CDATA[enki_ck]]></dc:creator><pubDate>Thu, 21 Apr 2011 19:55:47 GMT</pubDate></item><item><title><![CDATA[Reply to Large EDC Pouch making on Thu, 21 Apr 2011 16:25:20 GMT]]></title><description><![CDATA[<p dir="auto">Well done <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/483897</link><guid isPermaLink="true">https://multitool.ninja/post/483897</guid><dc:creator><![CDATA[Cyclone82]]></dc:creator><pubDate>Thu, 21 Apr 2011 16:25:20 GMT</pubDate></item><item><title><![CDATA[Reply to Large EDC Pouch making on Sat, 16 Apr 2011 18:03:01 GMT]]></title><description><![CDATA[<p dir="auto"><strong>FEEDBACK:</strong></p>
<p dir="auto">I have been carrying this pouch now for just over two weeks, with both large Leatherman tools and all the other stuff as shown in the photographs.<br />
I am very satisfied with the pouch.<br />
It is not too heave or uncomfortable at all.<br />
The belt clip did not bend yet, in spite of heavy pulling on it when I remove the whole pouch from my belt or pants (It is made of electroplated spring steel).<br />
When I do a job where I will need several of the bit kit bits I like to take off the pouch and work from it.<br />
I use my flashlight the most on a camping trip as I have done the previous week.<br />
There is still space for more stuff should I need to add something temporarily or for good.</p>
<p dir="auto">Pros:<br />
Size and design (my own requirements)<br />
Strength<br />
Neat<br />
Can be removed from belt.<br />
I have all my tools with me.<br />
Can do my own alterations or change the design should the need arises.<br />
Belt clip can accommodate wide belts.<br />
Contents secure with side release clip.</p>
<p dir="auto">Con:<br />
Time consuming to make<br />
May be too heavy or too big for other people.<br />
Design not suitable for other people's requirement.</p>
]]></description><link>https://multitool.ninja/post/482919</link><guid isPermaLink="true">https://multitool.ninja/post/482919</guid><dc:creator><![CDATA[Jors]]></dc:creator><pubDate>Sat, 16 Apr 2011 18:03:01 GMT</pubDate></item><item><title><![CDATA[Reply to Large EDC Pouch making on Sun, 03 Apr 2011 16:52:21 GMT]]></title><description><![CDATA[<p dir="auto">Beautiful, Jors!!</p>
<p dir="auto">Great work.</p>
<p dir="auto"><img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/480047</link><guid isPermaLink="true">https://multitool.ninja/post/480047</guid><dc:creator><![CDATA[RFOneWatt]]></dc:creator><pubDate>Sun, 03 Apr 2011 16:52:21 GMT</pubDate></item><item><title><![CDATA[Reply to Large EDC Pouch making on Fri, 01 Apr 2011 13:22:48 GMT]]></title><description><![CDATA[<p dir="auto">Jors,</p>
<p dir="auto">That is awesome!</p>
<p dir="auto">Sadly, my skills do not extend into projects as intricate as this.  Thankfully the BossLady has mad construction skillz.  I'll have to show this thread to her and get her input.</p>
<p dir="auto">Fantastic endproduct! <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/479607</link><guid isPermaLink="true">https://multitool.ninja/post/479607</guid><dc:creator><![CDATA[Mr. Whippy]]></dc:creator><pubDate>Fri, 01 Apr 2011 13:22:48 GMT</pubDate></item><item><title><![CDATA[Reply to Large EDC Pouch making on Fri, 01 Apr 2011 13:17:12 GMT]]></title><description><![CDATA[<p dir="auto">One other attachment method that could work for you , if you have access to older web gear , is Alice/NATO clips . They will handle quite a bit of weight ( water bottles and "Butt"packs ) . Caution , always use in pairs . If you can get some 1/8" Kydex and a heat gun , that's another route , far less prone to springing and memory .</p>
<p dir="auto">Chris</p>
]]></description><link>https://multitool.ninja/post/479605</link><guid isPermaLink="true">https://multitool.ninja/post/479605</guid><dc:creator><![CDATA[Styerman]]></dc:creator><pubDate>Fri, 01 Apr 2011 13:17:12 GMT</pubDate></item><item><title><![CDATA[Reply to Large EDC Pouch making on Thu, 31 Mar 2011 17:10:42 GMT]]></title><description><![CDATA[<p dir="auto">Brilliant - so nice to see custom projects like this :D</p>
]]></description><link>https://multitool.ninja/post/479315</link><guid isPermaLink="true">https://multitool.ninja/post/479315</guid><dc:creator><![CDATA[nuphoria]]></dc:creator><pubDate>Thu, 31 Mar 2011 17:10:42 GMT</pubDate></item><item><title><![CDATA[Reply to Large EDC Pouch making on Thu, 31 Mar 2011 16:15:56 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto">the can be problematical on bulkier pouches</p>
</blockquote>
<p dir="auto">I will keep an Eye on them.<br />
I go away on Saturday morning for a vacation, but I will take my old setup with as a backup.</p>
]]></description><link>https://multitool.ninja/post/479298</link><guid isPermaLink="true">https://multitool.ninja/post/479298</guid><dc:creator><![CDATA[Jors]]></dc:creator><pubDate>Thu, 31 Mar 2011 16:15:56 GMT</pubDate></item><item><title><![CDATA[Reply to Large EDC Pouch making on Thu, 31 Mar 2011 13:22:26 GMT]]></title><description><![CDATA[<p dir="auto">Two observations , One) , Great work . Two) I have very little abising faith in those steel IWB holster clips , I have seen and repaired/replaced lots of bent ones . They are OK on small IWB holsters , the can be problematical on bulkier pouches .</p>
<p dir="auto">Chris</p>
]]></description><link>https://multitool.ninja/post/479275</link><guid isPermaLink="true">https://multitool.ninja/post/479275</guid><dc:creator><![CDATA[Styerman]]></dc:creator><pubDate>Thu, 31 Mar 2011 13:22:26 GMT</pubDate></item><item><title><![CDATA[Reply to Large EDC Pouch making on Thu, 31 Mar 2011 13:03:05 GMT]]></title><description><![CDATA[<p dir="auto">Very nice work on the pouch.  <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/479270</link><guid isPermaLink="true">https://multitool.ninja/post/479270</guid><dc:creator><![CDATA[PyroJames]]></dc:creator><pubDate>Thu, 31 Mar 2011 13:03:05 GMT</pubDate></item><item><title><![CDATA[Reply to Large EDC Pouch making on Thu, 31 Mar 2011 09:42:12 GMT]]></title><description><![CDATA[<p dir="auto">I can't believe the amount of thought and work that went in to making your pouch  :o<br />
What a great job  <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/479238</link><guid isPermaLink="true">https://multitool.ninja/post/479238</guid><dc:creator><![CDATA[Sparky415]]></dc:creator><pubDate>Thu, 31 Mar 2011 09:42:12 GMT</pubDate></item><item><title><![CDATA[Reply to Large EDC Pouch making on Thu, 31 Mar 2011 07:45:14 GMT]]></title><description><![CDATA[<p dir="auto">Wow! To be honest I was wondering where this will lead to by looking at the pictures from pot to bottom but the end result looks great  <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/479233</link><guid isPermaLink="true">https://multitool.ninja/post/479233</guid><dc:creator><![CDATA[zepla]]></dc:creator><pubDate>Thu, 31 Mar 2011 07:45:14 GMT</pubDate></item><item><title><![CDATA[Reply to Large EDC Pouch making on Thu, 31 Mar 2011 07:29:27 GMT]]></title><description><![CDATA[<p dir="auto">that is so cool,  <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/479230</link><guid isPermaLink="true">https://multitool.ninja/post/479230</guid><dc:creator><![CDATA[Zed]]></dc:creator><pubDate>Thu, 31 Mar 2011 07:29:27 GMT</pubDate></item><item><title><![CDATA[Reply to Large EDC Pouch making on Thu, 31 Mar 2011 06:04:42 GMT]]></title><description><![CDATA[<p dir="auto">Very nice bag... I've been toying with idea to make custom one for me....  <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/479217</link><guid isPermaLink="true">https://multitool.ninja/post/479217</guid><dc:creator><![CDATA[edcgear]]></dc:creator><pubDate>Thu, 31 Mar 2011 06:04:42 GMT</pubDate></item><item><title><![CDATA[Reply to Large EDC Pouch making on Thu, 31 Mar 2011 05:59:18 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/gareth" aria-label="Profile: Gareth">@<bdi>Gareth</bdi></a> <a href="/post/479120">said</a>:<br />
What an amazing bit of design and an excellent pictorial as well. <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">+1 <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/479212</link><guid isPermaLink="true">https://multitool.ninja/post/479212</guid><dc:creator><![CDATA[Nikos]]></dc:creator><pubDate>Thu, 31 Mar 2011 05:59:18 GMT</pubDate></item><item><title><![CDATA[Reply to Large EDC Pouch making on Wed, 30 Mar 2011 23:01:59 GMT]]></title><description><![CDATA[<p dir="auto">What an amazing bit of design and an excellent pictorial as well. <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/479120</link><guid isPermaLink="true">https://multitool.ninja/post/479120</guid><dc:creator><![CDATA[Gareth]]></dc:creator><pubDate>Wed, 30 Mar 2011 23:01:59 GMT</pubDate></item><item><title><![CDATA[Reply to Large EDC Pouch making on Wed, 30 Mar 2011 22:03:54 GMT]]></title><description><![CDATA[<p dir="auto">WOW :o<br />
That is one carefully thought out and heavy duty pouch!  I've made my own pouches but nothing that large or with so much organization.<br />
Spectacular</p>
]]></description><link>https://multitool.ninja/post/479111</link><guid isPermaLink="true">https://multitool.ninja/post/479111</guid><dc:creator><![CDATA[Inzelique]]></dc:creator><pubDate>Wed, 30 Mar 2011 22:03:54 GMT</pubDate></item></channel></rss>