<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0"><channel><title><![CDATA[Leather back quiver.]]></title><description><![CDATA[<p dir="auto">I am going to try and make a Leather back quiver seeing that I am getting back into archery. This will be my first time doing anything like this in a long time. So bear with me as I will take photographs during the build to show you how I am going to make it. Of course, some of this I am going to make up as I go...so it should be interesting. I still don't have a clear mind on how the finished product will look,</p>
<p dir="auto">So here are the first two photographs...</p>
<p dir="auto">I start by drawing a pattern on some special transfer acetate. This way, I fi I like the project, I can replicate it by drawing over the penciled lines. Once I draw the template out, I will wet the leather and using a metal stylus (A pen with a small ball on the tip) to trace the pattern onto the wet leather underneath. Because the leather is wet, it will transfer the pattern easily enough.</p>
<p dir="auto"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Album%202/IMG_2056small.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Next, I then take a good pair of leather shears and cut along the line. In this photograph, you can see I have cut out the main body, and part of the upper strap. I was lucky enough to have found a piece of scrap belt that might fit the bill for the lower strap. I won't know if it is long enough until later in the build.</p>
<p dir="auto"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Album%202/IMG_2057small.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">So there you have it, I have started.  <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/topic/29781/leather-back-quiver</link><generator>RSS for Node</generator><lastBuildDate>Thu, 19 Nov 2026 19:24:24 GMT</lastBuildDate><atom:link href="https://multitool.ninja/topic/29781.rss" rel="self" type="application/rss+xml"/><pubDate>Fri, 29 Jul 2011 23:34:25 GMT</pubDate><ttl>60</ttl><item><title><![CDATA[Reply to Leather back quiver. on Fri, 05 Aug 2011 17:52:25 GMT]]></title><description><![CDATA[<p dir="auto">Thank you.</p>
]]></description><link>https://multitool.ninja/post/506865</link><guid isPermaLink="true">https://multitool.ninja/post/506865</guid><dc:creator><![CDATA[Chako]]></dc:creator><pubDate>Fri, 05 Aug 2011 17:52:25 GMT</pubDate></item><item><title><![CDATA[Reply to Leather back quiver. on Fri, 05 Aug 2011 16:54:07 GMT]]></title><description><![CDATA[<p dir="auto">Amazing craftsmanship Chako!<br />
As always <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/506852</link><guid isPermaLink="true">https://multitool.ninja/post/506852</guid><dc:creator><![CDATA[Threeme2189]]></dc:creator><pubDate>Fri, 05 Aug 2011 16:54:07 GMT</pubDate></item><item><title><![CDATA[Reply to Leather back quiver. on Thu, 04 Aug 2011 16:48:34 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/chako" aria-label="Profile: Chako">@<bdi>Chako</bdi></a> <a href="/post/506663">said</a>:<br />
Pringle cans...that is rather ingenious actually. I have only made pinhole cameras out of those before.  <img src="/assets/uploads/smileys/thinking.gif" alt=":think:" title="Thinking" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">not just me that though that was more than just a bit cleaver then?  Good idea Pat (I might just steal that). ;)</p>
]]></description><link>https://multitool.ninja/post/506681</link><guid isPermaLink="true">https://multitool.ninja/post/506681</guid><dc:creator><![CDATA[Gareth]]></dc:creator><pubDate>Thu, 04 Aug 2011 16:48:34 GMT</pubDate></item><item><title><![CDATA[Reply to Leather back quiver. on Thu, 04 Aug 2011 14:45:31 GMT]]></title><description><![CDATA[<p dir="auto">Pringle cans...that is rather ingenious actually. I have only made pinhole cameras out of those before.  <img src="/assets/uploads/smileys/thinking.gif" alt=":think:" title="Thinking" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/506663</link><guid isPermaLink="true">https://multitool.ninja/post/506663</guid><dc:creator><![CDATA[Chako]]></dc:creator><pubDate>Thu, 04 Aug 2011 14:45:31 GMT</pubDate></item><item><title><![CDATA[Reply to Leather back quiver. on Thu, 04 Aug 2011 14:08:44 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/ducktapehero" aria-label="Profile: ducktapehero">@<bdi>ducktapehero</bdi></a> <a href="/post/506655">said</a>:<br />
I feel inadequate. Not only can you do cool stuff like this..you also take much better pictures than I do.</p>
<p dir="auto">I would have made an arrow quiver out of a couple of empty Pringles cans and a bunch of ducktape. Then I would have screwed up the pictures.  :-\ :-\</p>
</blockquote>
<p dir="auto"><img src="/assets/uploads/smileys/rofl.gif" alt=":rofl:" title="rofl" class="forum-smiley emoji" /> That's better than me mate, I'd have had a polythene bag tied to my belt</p>
]]></description><link>https://multitool.ninja/post/506661</link><guid isPermaLink="true">https://multitool.ninja/post/506661</guid><dc:creator><![CDATA[AimlessWanderer]]></dc:creator><pubDate>Thu, 04 Aug 2011 14:08:44 GMT</pubDate></item><item><title><![CDATA[Reply to Leather back quiver. on Thu, 04 Aug 2011 13:31:47 GMT]]></title><description><![CDATA[<p dir="auto">I feel inadequate. Not only can you do cool stuff like this..you also take much better pictures than I do.</p>
<p dir="auto">I would have made an arrow quiver out of a couple of empty Pringles cans and a bunch of ducktape. Then I would have screwed up the pictures.  :-\ :-\</p>
]]></description><link>https://multitool.ninja/post/506655</link><guid isPermaLink="true">https://multitool.ninja/post/506655</guid><dc:creator><![CDATA[ducktapehero]]></dc:creator><pubDate>Thu, 04 Aug 2011 13:31:47 GMT</pubDate></item><item><title><![CDATA[Reply to Leather back quiver. on Thu, 04 Aug 2011 02:02:08 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/chako" aria-label="Profile: Chako">@<bdi>Chako</bdi></a> <a href="/post/506499">said</a>:<br />
OMG...the frog is back!  :ahhh  :D</p>
<p dir="auto">I am not so sure on the fancy part.  ;)</p>
</blockquote>
<p dir="auto">Thaaaaaat's right! And based on your craftsmanship, fancy indeed. :&lt;</p>
]]></description><link>https://multitool.ninja/post/506529</link><guid isPermaLink="true">https://multitool.ninja/post/506529</guid><dc:creator><![CDATA[Freudian Frog]]></dc:creator><pubDate>Thu, 04 Aug 2011 02:02:08 GMT</pubDate></item><item><title><![CDATA[Reply to Leather back quiver. on Wed, 03 Aug 2011 23:37:22 GMT]]></title><description><![CDATA[<p dir="auto">OMG...the frog is back!  :ahhh  :D</p>
<p dir="auto">I am not so sure on the fancy part.  ;)</p>
]]></description><link>https://multitool.ninja/post/506499</link><guid isPermaLink="true">https://multitool.ninja/post/506499</guid><dc:creator><![CDATA[Chako]]></dc:creator><pubDate>Wed, 03 Aug 2011 23:37:22 GMT</pubDate></item><item><title><![CDATA[Reply to Leather back quiver. on Wed, 03 Aug 2011 19:02:09 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/ahb" aria-label="Profile: AHB">@<bdi>AHB</bdi></a> <a href="/post/506419">said</a>:<br />
Not the World Of Warcraft kinda wow you know...  :D</p>
</blockquote>
<p dir="auto">Oh, you see, for a minute there I was confused... "Why is he talking about that now? <img src="/assets/uploads/smileys/thinking.gif" alt=":think:" title="Thinking" class="forum-smiley emoji" />"</p>
]]></description><link>https://multitool.ninja/post/506422</link><guid isPermaLink="true">https://multitool.ninja/post/506422</guid><dc:creator><![CDATA[Freudian Frog]]></dc:creator><pubDate>Wed, 03 Aug 2011 19:02:09 GMT</pubDate></item><item><title><![CDATA[Reply to Leather back quiver. on Wed, 03 Aug 2011 18:56:44 GMT]]></title><description><![CDATA[<p dir="auto">Just Wow...  8)</p>
<p dir="auto">Not the World Of Warcraft kinda wow you know...  :D</p>
]]></description><link>https://multitool.ninja/post/506419</link><guid isPermaLink="true">https://multitool.ninja/post/506419</guid><dc:creator><![CDATA[AHB]]></dc:creator><pubDate>Wed, 03 Aug 2011 18:56:44 GMT</pubDate></item><item><title><![CDATA[Reply to Leather back quiver. on Wed, 03 Aug 2011 18:44:06 GMT]]></title><description><![CDATA[<p dir="auto">Dan, you are a fancy, fancy man and I appreciate your sharing the details with us, a fantastic read. Nice photos as always! <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/506412</link><guid isPermaLink="true">https://multitool.ninja/post/506412</guid><dc:creator><![CDATA[Freudian Frog]]></dc:creator><pubDate>Wed, 03 Aug 2011 18:44:06 GMT</pubDate></item><item><title><![CDATA[Reply to Leather back quiver. on Wed, 03 Aug 2011 18:18:57 GMT]]></title><description><![CDATA[<p dir="auto">now I've seen a few quivers in my time, and I have a couple of cheapies and I'm sure their are some out there who do it all the time and have really nice ones but damn that is about the nicest one I've ever seen! <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /></p>
<p dir="auto">you did a great job! and great thread, step by step display! TY Chako! <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/506407</link><guid isPermaLink="true">https://multitool.ninja/post/506407</guid><dc:creator><![CDATA[WhichDawg]]></dc:creator><pubDate>Wed, 03 Aug 2011 18:18:57 GMT</pubDate></item><item><title><![CDATA[Reply to Leather back quiver. on Wed, 03 Aug 2011 17:51:29 GMT]]></title><description><![CDATA[<p dir="auto">I believe you could carry 2-3 dozen arrows in that quiver.</p>
<p dir="auto">Thanks Gareth.  <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/506393</link><guid isPermaLink="true">https://multitool.ninja/post/506393</guid><dc:creator><![CDATA[Chako]]></dc:creator><pubDate>Wed, 03 Aug 2011 17:51:29 GMT</pubDate></item><item><title><![CDATA[Reply to Leather back quiver. on Wed, 03 Aug 2011 17:49:03 GMT]]></title><description><![CDATA[<p dir="auto">Glad to see it done mate, looks excellent. <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/506392</link><guid isPermaLink="true">https://multitool.ninja/post/506392</guid><dc:creator><![CDATA[Gareth]]></dc:creator><pubDate>Wed, 03 Aug 2011 17:49:03 GMT</pubDate></item><item><title><![CDATA[Reply to Leather back quiver. on Wed, 03 Aug 2011 17:50:02 GMT]]></title><description><![CDATA[<p dir="auto">The last update, as I am now officially done.</p>
<p dir="auto">Well, sewing that bottom piece was somewhat difficult, It always is when you try to sew such different shapes together. I had some difficulty having the needles meet up with a few holes. Overall, it went better then I expected.</p>
<p dir="auto">From doing a few purses years ago, I recalled that it was difficult to get the shape right on some pieces. I figured I would use 3 separate sewing threads to ensure it would turn out good shape wise.  I divided the circle in half and sewed to the right with one pair of needles, and then sewed to the left with another pair of needles. I sewed one hole alternating from left to right until I got the other side. I went back over a few times and then used an X-Acto knife to cut the threads flush. Using the third piece of thread, I then sewed the flat part and tied it in with the side thread. I once again went back a few times and cut the threads flush. It is hard to tell that I used 4 pieces of thread to sew the sides and bottom together. I am a bit proud of how that turned out.</p>
<p dir="auto">Here you can see the left and right pair of threads.</p>
<p dir="auto"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Album%202/IMG_2101small.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Yay! I am done. Party time!!! Oh wait, not quite finished yet. I still have a few things to make the quiver look a little better.</p>
<p dir="auto"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Album%202/IMG_2102small.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Time to whip out one of the skivers to clean up that bottom piece and also to run it along the sides to even out the two pieces that are sewn together.</p>
<p dir="auto">Here you can see that I have trimmed the bottom piece so that it is flush with the other piece. Pardon the colours. My bounced flash is darkening the bottom piece, It is the same colour as the sides.</p>
<p dir="auto"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Album%202/IMG_2104small.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">With both bottom and side trimmed. It is time to make those edges a bit more professional. Here is another nylon slicker that I use for odd shapes. Once again, wet the edges and rub furiously  to even out the edges, and to also smooth it out.</p>
<p dir="auto"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Album%202/IMG_2105small.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Now for the final finish. I damp a sponge and gently rub it on some saddle soap until it lathers. I then coat and gently rub the soap into the leather. Wait to dry, and then gently rub with a soft cloth to give the end product a sheen. The saddle soap replenishes the natural oils that are taken out of the leather after repeated wetting and drying. It will also preserve the leather.</p>
<p dir="auto"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Album%202/IMG_2106small.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">And the final product. I do have some proper feather fletched arrows, but they are buried deep at the moment. Some discontinued Easton Autumn Orange XX75 Aluminum arrows with Blazer vanes will have to do for the cheesy finished product shot. :D</p>
<p dir="auto"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Album%202/IMG_2108small.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">This was a big project, especially seeing that I haven't done any leather work in such a long time. Nice to know I haven't lost it though. The feeling of accomplishment is great.  Thanks for letting me bore you with the build details.  <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /></p>
<p dir="auto">Now it is party time! My sore fingers demand it. :D</p>
]]></description><link>https://multitool.ninja/post/506390</link><guid isPermaLink="true">https://multitool.ninja/post/506390</guid><dc:creator><![CDATA[Chako]]></dc:creator><pubDate>Wed, 03 Aug 2011 17:50:02 GMT</pubDate></item><item><title><![CDATA[Reply to Leather back quiver. on Wed, 03 Aug 2011 16:35:25 GMT]]></title><description><![CDATA[<p dir="auto">whew! I just finished sewing that bottom piece. What a bear.</p>
]]></description><link>https://multitool.ninja/post/506363</link><guid isPermaLink="true">https://multitool.ninja/post/506363</guid><dc:creator><![CDATA[Chako]]></dc:creator><pubDate>Wed, 03 Aug 2011 16:35:25 GMT</pubDate></item><item><title><![CDATA[Reply to Leather back quiver. on Tue, 02 Aug 2011 23:46:00 GMT]]></title><description><![CDATA[<p dir="auto">I don't have time for commissions. However, if anyone is interested in getting into leather crafting, I hope they find this thread somewhat educational and give them some ideas on how to do some things. That is the intent of this thread...not to advertise.  <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/506183</link><guid isPermaLink="true">https://multitool.ninja/post/506183</guid><dc:creator><![CDATA[Chako]]></dc:creator><pubDate>Tue, 02 Aug 2011 23:46:00 GMT</pubDate></item><item><title><![CDATA[Reply to Leather back quiver. on Tue, 02 Aug 2011 22:59:22 GMT]]></title><description><![CDATA[<p dir="auto">That's very impressive work, only found this thread today and once again I'm astounded by the hidden talents you have.</p>
<p dir="auto">You may come to wish you'd never posted this thread as I'm sure you have a lot of requests for commissions now you've shown off what you can do.</p>
]]></description><link>https://multitool.ninja/post/506173</link><guid isPermaLink="true">https://multitool.ninja/post/506173</guid><dc:creator><![CDATA[Screwtape]]></dc:creator><pubDate>Tue, 02 Aug 2011 22:59:22 GMT</pubDate></item><item><title><![CDATA[Reply to Leather back quiver. on Tue, 02 Aug 2011 18:37:19 GMT]]></title><description><![CDATA[<p dir="auto">I could be wrong, but I'm getting the feeling that you're not a big fan of doing the lacing. <img src="/assets/uploads/smileys/thinking.gif" alt=":think:" title="Thinking" class="forum-smiley emoji" /> :D</p>
<p dir="auto">Whether you enjoy it or not, it's looking good. :)</p>
]]></description><link>https://multitool.ninja/post/506123</link><guid isPermaLink="true">https://multitool.ninja/post/506123</guid><dc:creator><![CDATA[Gareth]]></dc:creator><pubDate>Tue, 02 Aug 2011 18:37:19 GMT</pubDate></item><item><title><![CDATA[Reply to Leather back quiver. on Tue, 02 Aug 2011 17:24:25 GMT]]></title><description><![CDATA[<p dir="auto">Well...did I ever mention how much I hate lacing. Lace has a mind of its own, it is a living thing. You have to fight it to not twist on you, knot up, and if you are using the real leather lacing material, break on you. I spent a few hours lacing the top. I am happy it is now over and it does look good, but what grief. Now I remember why I never got into the lacing aspect of leather crafting. Oh I forgot to mention that the special lacing needles are also a pain to use.</p>
<p dir="auto">I first used a thonging chisel to make nice square slits along a groove made to even things out.</p>
<p dir="auto"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Album%202/IMG_2097small.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Next up, the pain of threading the lacing needle. Now these needles have two metal teeth that are supposed to bite into the lace once you sandwich it in between the two metal halves. Not at all pleasant to use. Anyways, enough of that. I wanted to keep things simple, so I did a very simple lace. The trick is to keep the good side always outwards.</p>
<p dir="auto"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Album%202/IMG_2098small.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Yay! I am done that part. Here is the dreaded lacing needle and the left over lace.</p>
<p dir="auto"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Album%202/IMG_2099small.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">After that, I figured I may as well start sewing the side. A slow and tedious process. Much like lacing come to think about it. :D</p>
<p dir="auto">Here is the side now sewn. All that is left is to do the bottom (not today, my fingers are very sore), and to place a leather finishing product to water proof it.</p>
<p dir="auto"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Album%202/IMG_2100small.jpg" alt="" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/506108</link><guid isPermaLink="true">https://multitool.ninja/post/506108</guid><dc:creator><![CDATA[Chako]]></dc:creator><pubDate>Tue, 02 Aug 2011 17:24:25 GMT</pubDate></item><item><title><![CDATA[Reply to Leather back quiver. on Tue, 02 Aug 2011 15:51:56 GMT]]></title><description><![CDATA[<p dir="auto">All I can say right now is that lacing sucks.</p>
]]></description><link>https://multitool.ninja/post/506090</link><guid isPermaLink="true">https://multitool.ninja/post/506090</guid><dc:creator><![CDATA[Chako]]></dc:creator><pubDate>Tue, 02 Aug 2011 15:51:56 GMT</pubDate></item><item><title><![CDATA[Reply to Leather back quiver. on Tue, 02 Aug 2011 12:02:01 GMT]]></title><description><![CDATA[<p dir="auto">Outstanding work! Can't wait to see it finished.</p>
]]></description><link>https://multitool.ninja/post/506073</link><guid isPermaLink="true">https://multitool.ninja/post/506073</guid><dc:creator><![CDATA[Singh]]></dc:creator><pubDate>Tue, 02 Aug 2011 12:02:01 GMT</pubDate></item><item><title><![CDATA[Reply to Leather back quiver. on Mon, 01 Aug 2011 23:21:18 GMT]]></title><description><![CDATA[<p dir="auto">Dan, you really are talented; that quiver looks cool. :D</p>
]]></description><link>https://multitool.ninja/post/505984</link><guid isPermaLink="true">https://multitool.ninja/post/505984</guid><dc:creator><![CDATA[Sazabi]]></dc:creator><pubDate>Mon, 01 Aug 2011 23:21:18 GMT</pubDate></item><item><title><![CDATA[Reply to Leather back quiver. on Mon, 01 Aug 2011 21:53:45 GMT]]></title><description><![CDATA[<p dir="auto">Thanks Allan.  :D</p>
<p dir="auto">Time for another series of photographs.</p>
<p dir="auto">Before sewing on the harness, the edges need to be finished first. I use a simple technique of wetting the edge and running a nylon slicker tool. The one shown here, I installed a Dremel shaft to hurry the job if needed. I don't use any other finish, as I find the edges come out nicely with just water, the slicker, and a bit of hard work.</p>
<p dir="auto"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Album%202/IMG_2087small.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">With the edges all cleaned up, it is time to do some preliminary sewing.</p>
<p dir="auto">The best most durable stitch is a saddle stitch. Lucky for me, it is also one of the easiest to do. To start off with, you need two needles. Blunt leather needles are preferred, and some waxed thread.</p>
<p dir="auto"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Album%202/IMG_2086small.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Next, place a needle on each end of your thread.</p>
<p dir="auto"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Album%202/IMG_2088small.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Now to do the Saddle stitch, you are basically doing figure eights, passing one needle through one side, and the other needle through the same hole from the other side.</p>
<p dir="auto"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Album%202/IMG_2089small.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">After stitching the top shoulder strap, time to get onto the lower part.</p>
<p dir="auto"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Album%202/IMG_2090small.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Now I have the harness completed and sewn to the body.</p>
<p dir="auto"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Album%202/IMG_2091small.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">And a look from the back. I found a bunch of small paperclips that work perfectly in holding the sides together.</p>
<p dir="auto"><img src="http://i145.photobucket.com/albums/r207/Chako_photo/Album%202/IMG_2092small.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Now I am thinking of doing something with the top. Might do a bit of lacing to dress it up somewhat and make the top a little stiffer. I still need to sew the main body and that bottom piece. That will be a job for another day though. I am taking a well deserved break tonight from the project.</p>
]]></description><link>https://multitool.ninja/post/505971</link><guid isPermaLink="true">https://multitool.ninja/post/505971</guid><dc:creator><![CDATA[Chako]]></dc:creator><pubDate>Mon, 01 Aug 2011 21:53:45 GMT</pubDate></item></channel></rss>