<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0"><channel><title><![CDATA[Evil's Inline Ratcheting Bit Driver]]></title><description><![CDATA[<p dir="auto">*Hey gang. Evil here again. Here is something I came up with about a year ago (sorry for the late posting). It has become my singular most used accessory (and most favorite) all across the board. I have used it countless times over the past year and it has earned it's keep as part of my EDC. I am constantly removing multiple fasteners. Before I created this, if I was only dealing with a few fasteners, I didn't mind using my multitool. However, what I found was that whenever I was dealing with let's say 10+ fasteners, I would always end up making a run for my dedicated ratcheting screwdriver so that I could work faster and more efficiently. This was my solution to that issue. The goal was to come up with something as compact as possible that would be up to the task of replacing my dedicated screwdriver. If it were too big and bulky, I know I would never end up EDC'ing it. It works with all of my tools with the large bit driver (Skeletool, Wave, Surge, my pocketknife project). Just as with my extended bit driver project, this is also extra deep in order to hold the leatherman style bits adequately and also uses an extra strong neodymium magnet.....</p>
<p dir="auto">~ evil ~*</p>
<p dir="auto"><em>Weight of a typical 1/4" hex bit driver, 22.6 grams.....</em><br />
<img src="http://i824.photobucket.com/albums/zz166/evil510/Multitools/Inline%20Ratcheting%20Bit%20Driver/2011-08-10222831.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><em>Weight of my Inline Ratcheting Bit Driver, 24.7 grams. A difference of 2.1 grams. In practical terms, a US penny weighs in at 2.5 grams, so the weight difference practically unnoticeable.....</em><br />
<img src="http://i824.photobucket.com/albums/zz166/evil510/Multitools/Inline%20Ratcheting%20Bit%20Driver/2011-08-10222906.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><em>Side profile comparison shot.....</em><br />
<img src="http://i824.photobucket.com/albums/zz166/evil510/Multitools/Inline%20Ratcheting%20Bit%20Driver/2011-08-10223012.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><em>Front view comparison shot.....</em><br />
<img src="http://i824.photobucket.com/albums/zz166/evil510/Multitools/Inline%20Ratcheting%20Bit%20Driver/2011-08-10223055.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><em>Rear view, close-up shot.....</em><br />
<img src="http://i824.photobucket.com/albums/zz166/evil510/Multitools/Inline%20Ratcheting%20Bit%20Driver/081420102284.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><em>Front view, close-up shot.....</em><br />
<img src="http://i824.photobucket.com/albums/zz166/evil510/Multitools/Inline%20Ratcheting%20Bit%20Driver/081420102285.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><em>Side view, close-up shot.....</em><br />
<img src="http://i824.photobucket.com/albums/zz166/evil510/Multitools/Inline%20Ratcheting%20Bit%20Driver/081420102287.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><em>And last but not least, the video demo. Please excuse the crappy ass quality as the video was taken about a year and four cellphones ago. I'll make another if/when I ever get the chance to do so.....</em><br />
<a href="http://www.youtube.com/watch?v=1o-lo0PlYKg#" rel="nofollow ugc">Evil's Inline Ratcheting Driver</a></p>
]]></description><link>https://multitool.ninja/topic/30239/evils-inline-ratcheting-bit-driver</link><generator>RSS for Node</generator><lastBuildDate>Mon, 16 Nov 2026 05:00:05 GMT</lastBuildDate><atom:link href="https://multitool.ninja/topic/30239.rss" rel="self" type="application/rss+xml"/><pubDate>Sun, 14 Aug 2011 17:23:36 GMT</pubDate><ttl>60</ttl><item><title><![CDATA[Reply to Evil's Inline Ratcheting Bit Driver on Thu, 22 Apr 2021 06:29:40 GMT]]></title><description><![CDATA[<p dir="auto"><img src="/assets/uploads/smileys/agreesign.gif" alt=":iagree:" title="I agree" class="forum-smiley emoji" /></p>
<p dir="auto">so awesome</p>
]]></description><link>https://multitool.ninja/post/2235178</link><guid isPermaLink="true">https://multitool.ninja/post/2235178</guid><dc:creator><![CDATA[King_Gorilla]]></dc:creator><pubDate>Thu, 22 Apr 2021 06:29:40 GMT</pubDate></item><item><title><![CDATA[Reply to Evil's Inline Ratcheting Bit Driver on Wed, 21 Apr 2021 10:26:31 GMT]]></title><description><![CDATA[<p dir="auto">I just had to revive this. Evil essentially designed the ratchet driver a decade before Leatherman started charging $30 for it. <img src="/assets/uploads/smileys/hatsoff.gif" alt=":hatsoff:" title="Hats Off" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/2234871</link><guid isPermaLink="true">https://multitool.ninja/post/2234871</guid><dc:creator><![CDATA[ReamerPunch]]></dc:creator><pubDate>Wed, 21 Apr 2021 10:26:31 GMT</pubDate></item><item><title><![CDATA[Reply to Evil's Inline Ratcheting Bit Driver on Sat, 25 Jun 2016 04:06:49 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/tattoosteve99" aria-label="Profile: tattoosteve99">@<bdi>tattoosteve99</bdi></a> <a href="/post/1290375">said</a>:</p>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/evil510" aria-label="Profile: evil510">@<bdi>evil510</bdi></a> <a href="/post/1284961">said</a>:</p>
<blockquote>
<p dir="auto">*Preview of the Brute Driver HD..... *<br />
<img src="http://i824.photobucket.com/albums/zz166/evil510/Brute%20Driver%20HD/IMG_20160417_155654_zps51iooabp.jpg" alt="" class="img-markdown  img-fluid" /></p>
</blockquote>
<p dir="auto"><img src="/assets/uploads/smileys/drool.gif" alt=":drool:" title="drool" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto"><em>I'll try and make a post on it in the near future.....  <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /></em></p>
]]></description><link>https://multitool.ninja/post/1290554</link><guid isPermaLink="true">https://multitool.ninja/post/1290554</guid><dc:creator><![CDATA[evil510]]></dc:creator><pubDate>Sat, 25 Jun 2016 04:06:49 GMT</pubDate></item><item><title><![CDATA[Reply to Evil's Inline Ratcheting Bit Driver on Fri, 24 Jun 2016 23:13:06 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/evil510" aria-label="Profile: evil510">@<bdi>evil510</bdi></a> <a href="/post/1284961">said</a>:<br />
*Preview of the Brute Driver HD..... *<br />
<img src="http://i824.photobucket.com/albums/zz166/evil510/Brute%20Driver%20HD/IMG_20160417_155654_zps51iooabp.jpg" alt="" class="img-markdown  img-fluid" /></p>
</blockquote>
<p dir="auto"><img src="/assets/uploads/smileys/drool.gif" alt=":drool:" title="drool" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1290375</link><guid isPermaLink="true">https://multitool.ninja/post/1290375</guid><dc:creator><![CDATA[tattoosteve99]]></dc:creator><pubDate>Fri, 24 Jun 2016 23:13:06 GMT</pubDate></item><item><title><![CDATA[Reply to Evil's Inline Ratcheting Bit Driver on Sun, 19 Jun 2016 04:38:54 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/poncho65" aria-label="Profile: Poncho65">@<bdi>Poncho65</bdi></a> <a href="/post/1285025">said</a>:<br />
:o That is a brute <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/drool.gif" alt=":drool:" title="drool" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto"><em>It has been able to handle all driving tasks thrown at it for over a decade in its past form and about a year in its present form.....</em></p>
<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/slaughtermed" aria-label="Profile: sLaughterMed">@<bdi>sLaughterMed</bdi></a> <a href="/post/1285197">said</a>:<br />
That is a pretty tool</p>
</blockquote>
<p dir="auto"><em>Thank you, sLaughter.....</em></p>
]]></description><link>https://multitool.ninja/post/1285917</link><guid isPermaLink="true">https://multitool.ninja/post/1285917</guid><dc:creator><![CDATA[evil510]]></dc:creator><pubDate>Sun, 19 Jun 2016 04:38:54 GMT</pubDate></item><item><title><![CDATA[Reply to Evil's Inline Ratcheting Bit Driver on Fri, 17 Jun 2016 20:20:21 GMT]]></title><description><![CDATA[<p dir="auto">That is a pretty tool</p>
]]></description><link>https://multitool.ninja/post/1285197</link><guid isPermaLink="true">https://multitool.ninja/post/1285197</guid><dc:creator><![CDATA[sLaughterMed]]></dc:creator><pubDate>Fri, 17 Jun 2016 20:20:21 GMT</pubDate></item><item><title><![CDATA[Reply to Evil's Inline Ratcheting Bit Driver on Fri, 17 Jun 2016 18:15:38 GMT]]></title><description><![CDATA[<p dir="auto">:o That is a brute <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/drool.gif" alt=":drool:" title="drool" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1285025</link><guid isPermaLink="true">https://multitool.ninja/post/1285025</guid><dc:creator><![CDATA[Poncho65]]></dc:creator><pubDate>Fri, 17 Jun 2016 18:15:38 GMT</pubDate></item><item><title><![CDATA[Reply to Evil's Inline Ratcheting Bit Driver on Fri, 17 Jun 2016 18:03:21 GMT]]></title><description><![CDATA[<p dir="auto">*Preview of the Brute Driver HD..... *<br />
<img src="http://i824.photobucket.com/albums/zz166/evil510/Brute%20Driver%20HD/IMG_20160417_155654_zps51iooabp.jpg" alt="" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/1284961</link><guid isPermaLink="true">https://multitool.ninja/post/1284961</guid><dc:creator><![CDATA[evil510]]></dc:creator><pubDate>Fri, 17 Jun 2016 18:03:21 GMT</pubDate></item><item><title><![CDATA[Reply to Evil's Inline Ratcheting Bit Driver on Thu, 16 Jun 2016 06:17:54 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto">@Xelkos <a href="/post/1283982">said</a>:<br />
Has anyone found a suitable replacement Leatherman Ratchet that can withstand some pressure? The one mentioned here did not fair well although was fun trying it out.  :o</p>
</blockquote>
<p dir="auto">*It is a sound design, however, it is only as strong as the weakest link. In this case, the ratchet mechanism one chooses to make one from. There are many variations out there. Many of the cheaper, smaller versions do in fact have plastic gears, imagine that! Some are also made from what appears to be some cheap pot metal. Also I've yet to come across a compact version with more than one locking pawl. There simply isn't room. My original version is still used today but I never push it beyond what I consider light-medium duty. The size was ideal, but the strength wasn't. I hate having to limit myself or have to run for a dedicated driver if I don't have to.....</p>
<p dir="auto">With that said, your timing is serendipitous. If you notice my recent signature, my Brute Driver HD has been complete for quite some time now. And it is exactly as the name implies. Granted, it is not small like the original version, it is much larger. This bad boy means business. What it lacks in compactness, it more than makes up for in brute strength. The mechanism was from my tried and tested ratcheting screwdriver of over ten years that never failed me. Upon rebuilding it, I was pleasantly surprised that it showed minimal wear internally despite all of my abuse. I reproduced new locking pawls out of D2 for it. It did have a nylon outer ring to switch directions. The ring however had nothing to do with the ratchet strength, it only toggled a ball bearing to switch the pawl. It was the only part that showed wear from ball bearing travel. I remade a new version out of delrin with a new aluminum outer ring with knurling. I don't hold back at all when using this new version whatsoever. It is another one of my mods that I haven't gotten around to posting on.....</p>
<p dir="auto">~ evil ~*</p>
]]></description><link>https://multitool.ninja/post/1283995</link><guid isPermaLink="true">https://multitool.ninja/post/1283995</guid><dc:creator><![CDATA[evil510]]></dc:creator><pubDate>Thu, 16 Jun 2016 06:17:54 GMT</pubDate></item><item><title><![CDATA[Reply to Evil's Inline Ratcheting Bit Driver on Thu, 16 Jun 2016 04:54:55 GMT]]></title><description><![CDATA[<p dir="auto">Has anyone found a suitable replacement Leatherman Ratchet that can withstand some pressure? The one mentioned here did not fair well although was fun trying it out.  :o</p>
]]></description><link>https://multitool.ninja/post/1283982</link><guid isPermaLink="true">https://multitool.ninja/post/1283982</guid><dc:creator><![CDATA[Outback in Idaho]]></dc:creator><pubDate>Thu, 16 Jun 2016 04:54:55 GMT</pubDate></item><item><title><![CDATA[Reply to Evil's Inline Ratcheting Bit Driver on Sat, 15 Oct 2011 03:07:05 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/tattoosteve99" aria-label="Profile: tattoosteve99">@<bdi>tattoosteve99</bdi></a> <a href="/post/529057">said</a>:<br />
Mine is a little on the cheap side also. I'm still looking for a heavy duty model. If I find one I'll let you know.</p>
</blockquote>
<p dir="auto">Thanks mate! I;d hate to have to cut one down just for it to break again. Novel idea, yet the quality isn't. I'd give another one a go if it wasn't for putting out money for gas and driving 200 miles round trip to the docs over this post hernia surgery. That's eating my mad money.  &gt;:(</p>
]]></description><link>https://multitool.ninja/post/529244</link><guid isPermaLink="true">https://multitool.ninja/post/529244</guid><dc:creator><![CDATA[Outback in Idaho]]></dc:creator><pubDate>Sat, 15 Oct 2011 03:07:05 GMT</pubDate></item><item><title><![CDATA[Reply to Evil's Inline Ratcheting Bit Driver on Fri, 14 Oct 2011 18:19:52 GMT]]></title><description><![CDATA[<p dir="auto">I don't trust mine all the way i break the screws loose first then i use the ratchet driver.<br />
Mike</p>
]]></description><link>https://multitool.ninja/post/529064</link><guid isPermaLink="true">https://multitool.ninja/post/529064</guid><dc:creator><![CDATA[Mike 56]]></dc:creator><pubDate>Fri, 14 Oct 2011 18:19:52 GMT</pubDate></item><item><title><![CDATA[Reply to Evil's Inline Ratcheting Bit Driver on Fri, 14 Oct 2011 18:00:26 GMT]]></title><description><![CDATA[<p dir="auto">Mine is a little on the cheap side also. I'm still looking for a heavy duty model. If I find one I'll let you know.</p>
]]></description><link>https://multitool.ninja/post/529057</link><guid isPermaLink="true">https://multitool.ninja/post/529057</guid><dc:creator><![CDATA[tattoosteve99]]></dc:creator><pubDate>Fri, 14 Oct 2011 18:00:26 GMT</pubDate></item><item><title><![CDATA[Reply to Evil's Inline Ratcheting Bit Driver on Fri, 14 Oct 2011 00:57:24 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/mike" aria-label="Profile: Mike">@<bdi>Mike</bdi></a> 56 <a href="/post/528742">said</a>:<br />
Do you want me to see if they have any more in the store they were 3.50. I think i can mail it to you for another 3.00. It is a lot cheaper than 15.00.<br />
Mike</p>
</blockquote>
<p dir="auto">Thanks mate, but I'll just do without. Was fun while it lasted.  :-\</p>
]]></description><link>https://multitool.ninja/post/528847</link><guid isPermaLink="true">https://multitool.ninja/post/528847</guid><dc:creator><![CDATA[Outback in Idaho]]></dc:creator><pubDate>Fri, 14 Oct 2011 00:57:24 GMT</pubDate></item><item><title><![CDATA[Reply to Evil's Inline Ratcheting Bit Driver on Thu, 13 Oct 2011 21:01:53 GMT]]></title><description><![CDATA[<p dir="auto">Do you want me to see if they have any more in the store they were 3.50. I think i can mail it to you for another 3.00. It is a lot cheaper than 15.00.<br />
Mike</p>
]]></description><link>https://multitool.ninja/post/528742</link><guid isPermaLink="true">https://multitool.ninja/post/528742</guid><dc:creator><![CDATA[Mike 56]]></dc:creator><pubDate>Thu, 13 Oct 2011 21:01:53 GMT</pubDate></item><item><title><![CDATA[Reply to Evil's Inline Ratcheting Bit Driver on Wed, 12 Oct 2011 07:38:34 GMT]]></title><description><![CDATA[<p dir="auto">Not pleased with the quality of the ratchet.  :'(</p>
<p dir="auto">Was trying to put a screw in for a bracket when I had to apply firm pressure. The ratchet instead slipped. Now any time I apply even the slightest tightening motion is starts slipping instead. Put the switch in the center, does the same thing.<br />
Yet untightening the ratchet seems unaffected, so far.</p>
<p dir="auto">Can see now why the things were on close-out.</p>
<p dir="auto">Is it possible to disassemble this racthet and fix/replace whatever is slipping inside? Don't want to spent another $15 (item + shipping) to replace it.<br />
Am a smurfin' miffed that the ratchet couldn't hold enough to tighten a screw into a pine toilet paper roll holder.  <img src="/assets/uploads/smileys/rant.gif" alt=":rant:" title="rant!" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/528238</link><guid isPermaLink="true">https://multitool.ninja/post/528238</guid><dc:creator><![CDATA[Outback in Idaho]]></dc:creator><pubDate>Wed, 12 Oct 2011 07:38:34 GMT</pubDate></item><item><title><![CDATA[Reply to Evil's Inline Ratcheting Bit Driver on Tue, 27 Sep 2011 05:59:35 GMT]]></title><description><![CDATA[<p dir="auto">You did a nice job your driver and pix turned out nice.<br />
Thanks,<br />
Mike</p>
]]></description><link>https://multitool.ninja/post/522965</link><guid isPermaLink="true">https://multitool.ninja/post/522965</guid><dc:creator><![CDATA[Mike 56]]></dc:creator><pubDate>Tue, 27 Sep 2011 05:59:35 GMT</pubDate></item><item><title><![CDATA[Reply to Evil's Inline Ratcheting Bit Driver on Tue, 27 Sep 2011 04:29:02 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/mike" aria-label="Profile: Mike">@<bdi>Mike</bdi></a> 56 <a href="/post/522936">said</a>:<br />
We need pix!<br />
Mike</p>
</blockquote>
<p dir="auto">Mine aren't as sexy as Evil510's or the rest of the gang. Never thought of modifying or making stuff till I found this site. You know how many tools I've bought/traded for because of this highly informative site?? :ahhh</p>
<p dir="auto">And I owe this infliction on one person... Juli Warner. She's the one that sent me here over a year ago... lil brat. And I thought she was giving me the hint... you know... get rid of me and my crazy tool ideas.</p>
]]></description><link>https://multitool.ninja/post/522952</link><guid isPermaLink="true">https://multitool.ninja/post/522952</guid><dc:creator><![CDATA[Outback in Idaho]]></dc:creator><pubDate>Tue, 27 Sep 2011 04:29:02 GMT</pubDate></item><item><title><![CDATA[Reply to Evil's Inline Ratcheting Bit Driver on Tue, 27 Sep 2011 02:25:55 GMT]]></title><description><![CDATA[<p dir="auto">We need pix!<br />
Mike</p>
]]></description><link>https://multitool.ninja/post/522936</link><guid isPermaLink="true">https://multitool.ninja/post/522936</guid><dc:creator><![CDATA[Mike 56]]></dc:creator><pubDate>Tue, 27 Sep 2011 02:25:55 GMT</pubDate></item><item><title><![CDATA[Reply to Evil's Inline Ratcheting Bit Driver on Tue, 27 Sep 2011 01:33:35 GMT]]></title><description><![CDATA[<p dir="auto">Used a Dremel tool, a few grinder bits, sander bit, and finally a polishing grit wheel.</p>
<p dir="auto"><img src="http://i850.photobucket.com/albums/ab66/Xelkos/tools/DSC00468.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Cut the sides to lock in the Large Bit Driver. Tested both sides out and the second cut was a tighter fit - so marked the shaft with four rough spots.</p>
<p dir="auto"><img src="http://i850.photobucket.com/albums/ab66/Xelkos/tools/DSC00475.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">This will help find the best side for locking with the spring. Polished that down too.</p>
<p dir="auto">Thanks MTO!!  :D</p>
<p dir="auto"><img src="http://i850.photobucket.com/albums/ab66/Xelkos/tools/DSC00472.jpg" alt="" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/522921</link><guid isPermaLink="true">https://multitool.ninja/post/522921</guid><dc:creator><![CDATA[Outback in Idaho]]></dc:creator><pubDate>Tue, 27 Sep 2011 01:33:35 GMT</pubDate></item><item><title><![CDATA[Reply to Evil's Inline Ratcheting Bit Driver on Tue, 27 Sep 2011 00:56:19 GMT]]></title><description><![CDATA[<p dir="auto">I coated the ratchet shank with some J-B Weld and taped it in the 1/4 nut setter as is. If you are going to grind the nut setter to fit the Leatherman flat bit holder do it before you attach to the ratchet.<br />
Mike</p>
]]></description><link>https://multitool.ninja/post/522912</link><guid isPermaLink="true">https://multitool.ninja/post/522912</guid><dc:creator><![CDATA[Mike 56]]></dc:creator><pubDate>Tue, 27 Sep 2011 00:56:19 GMT</pubDate></item><item><title><![CDATA[Reply to Evil's Inline Ratcheting Bit Driver on Mon, 26 Sep 2011 23:36:46 GMT]]></title><description><![CDATA[<p dir="auto">Popped the ratcheting mechanism out using the Crunch adjuster bolt (kept my original one) and a rubber mallet.  :D</p>
<p dir="auto">Will have to modify the shank with a Dremel tool later.  <img src="/assets/uploads/smileys/poke2.gif" alt=":pok:" title="pok" class="forum-smiley emoji" /> Thanks for the help <strong>Tattoosteve99</strong>.</p>
<p dir="auto">And more thanks to E510 for making it.</p>
]]></description><link>https://multitool.ninja/post/522864</link><guid isPermaLink="true">https://multitool.ninja/post/522864</guid><dc:creator><![CDATA[Outback in Idaho]]></dc:creator><pubDate>Mon, 26 Sep 2011 23:36:46 GMT</pubDate></item><item><title><![CDATA[Reply to Evil's Inline Ratcheting Bit Driver on Mon, 26 Sep 2011 22:47:47 GMT]]></title><description><![CDATA[<p dir="auto">I just used the bit that came with it. 1/4 inch I believe just a friction fit for mine. It's pretty tight so tap lightly with the hammer. Free advice. Grind it before you attach it.</p>
]]></description><link>https://multitool.ninja/post/522859</link><guid isPermaLink="true">https://multitool.ninja/post/522859</guid><dc:creator><![CDATA[tattoosteve99]]></dc:creator><pubDate>Mon, 26 Sep 2011 22:47:47 GMT</pubDate></item><item><title><![CDATA[Reply to Evil's Inline Ratcheting Bit Driver on Mon, 26 Sep 2011 22:44:29 GMT]]></title><description><![CDATA[<p dir="auto">Got the finger drive in today. Guess I need to is a saw to free the ratcheting mechanism free since it is fitted into a hexagonal hole.</p>
<p dir="auto"><img src="http://i850.photobucket.com/albums/ab66/Xelkos/tools/DSC00462.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="http://i850.photobucket.com/albums/ab66/Xelkos/tools/DSC00466.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Couple of questions:<br />
• Did y'all use one of the included bits for the shank, then grind that down?<br />
• Did you happen to use some sort of adhesive to hold the bit onto the ratcheting mechanism, or leave it as friction fit?</p>
]]></description><link>https://multitool.ninja/post/522856</link><guid isPermaLink="true">https://multitool.ninja/post/522856</guid><dc:creator><![CDATA[Outback in Idaho]]></dc:creator><pubDate>Mon, 26 Sep 2011 22:44:29 GMT</pubDate></item></channel></rss>