<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0"><channel><title><![CDATA[M2.5 bolts]]></title><description><![CDATA[<p dir="auto">Has anyone tried putting an SAK together using M2.5 bolts?</p>
<p dir="auto">I am always weary about putting too much pressure on SAK tools for fear of bending/breaking pins. M2.5 bolts are made of steel and are correct diameter for the holes. I highly doubt they would bend or pull out before the actual tool breaks. Also seems easy to put the knife together without having to deal with pins and bushings. The heads on these bolts are about 1.5mm thick, probably not thicker than regular bushings. For the other side, an M2.5 jam nut can be used, with the same thickness as the bolt head.</p>
<p dir="auto">Any thoughts?</p>
]]></description><link>https://multitool.ninja/topic/31589/m25-bolts</link><generator>RSS for Node</generator><lastBuildDate>Wed, 18 Nov 2026 23:23:46 GMT</lastBuildDate><atom:link href="https://multitool.ninja/topic/31589.rss" rel="self" type="application/rss+xml"/><pubDate>Wed, 28 Sep 2011 19:04:52 GMT</pubDate><ttl>60</ttl><item><title><![CDATA[Reply to M2.5 bolts on Fri, 30 Sep 2011 23:34:51 GMT]]></title><description><![CDATA[<p dir="auto">Gareth,</p>
<p dir="auto">Thank you very much for posting these photos. I really appreciate you digging them out. The bolts actully look pretty nice. seems like this mod was successful.</p>
]]></description><link>https://multitool.ninja/post/524444</link><guid isPermaLink="true">https://multitool.ninja/post/524444</guid><dc:creator><![CDATA[batjka104]]></dc:creator><pubDate>Fri, 30 Sep 2011 23:34:51 GMT</pubDate></item><item><title><![CDATA[Reply to M2.5 bolts on Fri, 30 Sep 2011 18:33:58 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/batjka104" aria-label="Profile: batjka104">@<bdi>batjka104</bdi></a> <a href="/post/524247">said</a>:<br />
Thank you very much. Unfortunately, joining Knife Forums proved to be a challenge. For whatever reason I do not receive an activation email. I have tried several times. There must be a software glitch somewhere. I will keep trying. If anyone here has access, maybe a picture can be published here. Don't know if it will violate any policy of such a secretive forum.</p>
</blockquote>
<p dir="auto">I think as long as Spudley is getting the credit then I can't see why he'd object to you guys seeing these:<br />
<img src="http://www.knifeforums.com/ubbthreads/files//601149-Screws1.JPG" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="http://www.knifeforums.com/ubbthreads/files//601151-screws2.JPG" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="http://www.knifeforums.com/ubbthreads/files//601161-Screws4.JPG" alt="" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/524352</link><guid isPermaLink="true">https://multitool.ninja/post/524352</guid><dc:creator><![CDATA[Gareth]]></dc:creator><pubDate>Fri, 30 Sep 2011 18:33:58 GMT</pubDate></item><item><title><![CDATA[Reply to M2.5 bolts on Fri, 30 Sep 2011 14:46:58 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/batjka104" aria-label="Profile: batjka104">@<bdi>batjka104</bdi></a> <a href="/post/523976">said</a>:<br />
Thank you for the advice, but I would disagree. While you might have a point about thread wear in continuously moving surfaces, SAK tools only open once in a while, thus the wear would be negligible. If you were talking about a constantly spinning wheel, I would say you're right.</p>
<p dir="auto">Of course an inside-threaded tube with end screws would be ideal to use in this application. Unfortunately, I could not locate a source of anything like this. At least not with a 2.5mm outside diameter.</p>
<p dir="auto">Maybe you can point me in the right direction.</p>
</blockquote>
<p dir="auto">I am not sure if I have such a small<br />
Tap but I could make some brass tubes with an OD if 2.5. Just get me the exact length and we can work something out :)</p>
<p dir="auto">mini-lathe to the rescue!</p>
]]></description><link>https://multitool.ninja/post/524301</link><guid isPermaLink="true">https://multitool.ninja/post/524301</guid><dc:creator><![CDATA[Metropolicity]]></dc:creator><pubDate>Fri, 30 Sep 2011 14:46:58 GMT</pubDate></item><item><title><![CDATA[Reply to M2.5 bolts on Fri, 30 Sep 2011 12:13:54 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/bushidomosquito" aria-label="Profile: bushidomosquito">@<bdi>bushidomosquito</bdi></a> <a href="/post/524135">said</a>:</p>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/batjka104" aria-label="Profile: batjka104">@<bdi>batjka104</bdi></a> <a href="/post/523976">said</a>:</p>
<blockquote>
<p dir="auto">Thank you for the advice, but I would disagree. While you might have a point about thread wear in continuously moving surfaces, SAK tools only open once in a while, thus the wear would be negligible. If you were talking about a constantly spinning wheel, I would say you're right.</p>
<p dir="auto">Of course an inside-threaded tube with end screws would be ideal to use in this application. Unfortunately, I could not locate a source of anything like this. At least not with a 2.5mm outside diameter.</p>
<p dir="auto">Maybe you can point me in the right direction.</p>
</blockquote>
<p dir="auto">I'm after exactly that, a threaded tube to fit undrilled tools and accept a screw from both sides. I have spent many hours looking for them and it's just not happening without a custom order from a machine shop or your own lathe.</p>
</blockquote>
<p dir="auto">+1</p>
<p dir="auto">I've looked but never found and as I don't own or have access to a lathe I've pretty much given in on the idea.</p>
]]></description><link>https://multitool.ninja/post/524270</link><guid isPermaLink="true">https://multitool.ninja/post/524270</guid><dc:creator><![CDATA[Neil]]></dc:creator><pubDate>Fri, 30 Sep 2011 12:13:54 GMT</pubDate></item><item><title><![CDATA[Reply to M2.5 bolts on Fri, 30 Sep 2011 10:37:07 GMT]]></title><description><![CDATA[<p dir="auto">Thank you very much. Unfortunately, joining Knife Forums proved to be a challenge. For whatever reason I do not receive an activation email. I have tried several times. There must be a software glitch somewhere. I will keep trying. If anyone here has access, maybe a picture can be published here. Don't know if it will violate any policy of such a secretive forum.</p>
]]></description><link>https://multitool.ninja/post/524247</link><guid isPermaLink="true">https://multitool.ninja/post/524247</guid><dc:creator><![CDATA[batjka104]]></dc:creator><pubDate>Fri, 30 Sep 2011 10:37:07 GMT</pubDate></item><item><title><![CDATA[Reply to M2.5 bolts on Fri, 30 Sep 2011 03:31:23 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/batjka104" aria-label="Profile: batjka104">@<bdi>batjka104</bdi></a> <a href="/post/523859">said</a>:<br />
Do you have any links or photos of Spudley's modifications? Can I get in touch with this guy? I'm curious of how this thing had worked out and how he finished the heads. Honestly, I don't know why more people don't do this.</p>
</blockquote>
<p dir="auto">It's in the SOSAK <a href="http://www.knifeforums.com/forums/showtopic.php?tid/824615/" rel="nofollow ugc">Mod Index</a> - The date of the original post is 2005 and Spudley hasn't been around for a long time - <a href="http://www.knifeforums.com/forums/showtopic.php?tid/601149" rel="nofollow ugc">LINK</a></p>
<p dir="auto">Note that you have to be registered on KF <strong>and</strong> have permission to see the the secret forum in order for the links to work.</p>
]]></description><link>https://multitool.ninja/post/524151</link><guid isPermaLink="true">https://multitool.ninja/post/524151</guid><dc:creator><![CDATA[Spork, Lord of Lime Jello!]]></dc:creator><pubDate>Fri, 30 Sep 2011 03:31:23 GMT</pubDate></item><item><title><![CDATA[Reply to M2.5 bolts on Fri, 30 Sep 2011 01:34:58 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/batjka104" aria-label="Profile: batjka104">@<bdi>batjka104</bdi></a> <a href="/post/523976">said</a>:<br />
Thank you for the advice, but I would disagree. While you might have a point about thread wear in continuously moving surfaces, SAK tools only open once in a while, thus the wear would be negligible. If you were talking about a constantly spinning wheel, I would say you're right.</p>
<p dir="auto">Of course an inside-threaded tube with end screws would be ideal to use in this application. Unfortunately, I could not locate a source of anything like this. At least not with a 2.5mm outside diameter.</p>
<p dir="auto">Maybe you can point me in the right direction.</p>
</blockquote>
<p dir="auto">I'm after exactly that, a threaded tube to fit undrilled tools and accept a screw from both sides. I have spent many hours looking for them and it's just not happening without a custom order from a machine shop or your own lathe.</p>
]]></description><link>https://multitool.ninja/post/524135</link><guid isPermaLink="true">https://multitool.ninja/post/524135</guid><dc:creator><![CDATA[bushidomosquito]]></dc:creator><pubDate>Fri, 30 Sep 2011 01:34:58 GMT</pubDate></item><item><title><![CDATA[Reply to M2.5 bolts on Thu, 29 Sep 2011 19:10:30 GMT]]></title><description><![CDATA[<p dir="auto">Thank you for the advice, but I would disagree. While you might have a point about thread wear in continuously moving surfaces, SAK tools only open once in a while, thus the wear would be negligible. If you were talking about a constantly spinning wheel, I would say you're right.</p>
<p dir="auto">Of course an inside-threaded tube with end screws would be ideal to use in this application. Unfortunately, I could not locate a source of anything like this. At least not with a 2.5mm outside diameter.</p>
<p dir="auto">Maybe you can point me in the right direction.</p>
]]></description><link>https://multitool.ninja/post/523976</link><guid isPermaLink="true">https://multitool.ninja/post/523976</guid><dc:creator><![CDATA[batjka104]]></dc:creator><pubDate>Thu, 29 Sep 2011 19:10:30 GMT</pubDate></item><item><title><![CDATA[Reply to M2.5 bolts on Thu, 29 Sep 2011 18:49:07 GMT]]></title><description><![CDATA[<p dir="auto">Wear is inversely proportional to surface contact area.</p>
<p dir="auto">The brass pin in making complete contact with the hole in the steel tool therefore the force at any one part of it is quite low, also lubrication is smeared around the pin every time it is opened and closed in a fine film. Brass is a very good bushing material against steels and stainless steels due to the relative hardnesses. There are strange laws governing working surface mating convention but they should not be ignored.</p>
<p dir="auto">Using a thread as a bushing surface massively reduces the contact area to probably 1/100th of the brass pin. Lubrication will not stay on the thread tips so it will work dry very quickly. Moving dry steel on steel is not desireable. Wear will occur due to force being focused on the thread tips. Only a small amount of wear will change the outer diameter of the bolts enough for noticeable sideways movement to occur.</p>
<p dir="auto">This is just my experience but i would advice to never move something across or around an exposed thread. Use a threaded tube as the bushing surface and screw into that. This way you dont have to make a nut at the other end.</p>
]]></description><link>https://multitool.ninja/post/523973</link><guid isPermaLink="true">https://multitool.ninja/post/523973</guid><dc:creator><![CDATA[Tofty]]></dc:creator><pubDate>Thu, 29 Sep 2011 18:49:07 GMT</pubDate></item><item><title><![CDATA[Reply to M2.5 bolts on Wed, 28 Sep 2011 22:02:30 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/neil" aria-label="Profile: Neil">@<bdi>Neil</bdi></a> <a href="/post/523586">said</a>:<br />
Dunno, long time back.  To be honest peening brass is probably easier than trying to get bolts right and then trimming down and then getting scales to fit back on.</p>
<p dir="auto">Alox is a different matter, bolts would be easier.</p>
</blockquote>
<p dir="auto">I don't see much of an issue with bolts. Tighten the nut, then cut it flush with a hack saw and file the remainder down. In my opinion, a lot more could go wrong with the peening procedure. Plus, bolts should be stronger as I have mentioned before.</p>
<p dir="auto">As far as fitting the scales, it could be tricky, but I was thinking more of Alox, metal, or wood scales. My only concern would be the appearance of the nut on the outside of the scales. Guess they would have to have a countersink of some kind to get the bolt head and the nut flush.</p>
<p dir="auto">Any way to find that old thread? I would love to read it and learn from other people's experience. After all, that's why I'm on this forum.</p>
]]></description><link>https://multitool.ninja/post/523609</link><guid isPermaLink="true">https://multitool.ninja/post/523609</guid><dc:creator><![CDATA[batjka104]]></dc:creator><pubDate>Wed, 28 Sep 2011 22:02:30 GMT</pubDate></item><item><title><![CDATA[Reply to M2.5 bolts on Wed, 28 Sep 2011 21:17:09 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/batjka104" aria-label="Profile: batjka104">@<bdi>batjka104</bdi></a> <a href="/post/523590">said</a>:<br />
I doubt the threads would wear down any faster than the brass rod. After all we're talking about steel vs brass.</p>
</blockquote>
<p dir="auto">you could well be right, as Neil says it was a discussion on another forum a long time ago.  I now can't remember if the thread wear was just a prediction or an actual issue. <img src="/assets/uploads/smileys/shrug.gif" alt=":shrug:" title="Shrug" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/523598</link><guid isPermaLink="true">https://multitool.ninja/post/523598</guid><dc:creator><![CDATA[Gareth]]></dc:creator><pubDate>Wed, 28 Sep 2011 21:17:09 GMT</pubDate></item><item><title><![CDATA[Reply to M2.5 bolts on Wed, 28 Sep 2011 21:11:58 GMT]]></title><description><![CDATA[<p dir="auto">I doubt the threads would wear down any faster than the brass rod. After all we're talking about steel vs brass.</p>
]]></description><link>https://multitool.ninja/post/523590</link><guid isPermaLink="true">https://multitool.ninja/post/523590</guid><dc:creator><![CDATA[batjka104]]></dc:creator><pubDate>Wed, 28 Sep 2011 21:11:58 GMT</pubDate></item><item><title><![CDATA[Reply to M2.5 bolts on Wed, 28 Sep 2011 21:01:52 GMT]]></title><description><![CDATA[<p dir="auto">Dunno, long time back.  To be honest peening brass is probably easier than trying to get bolts right and then trimming down and then getting scales to fit back on.</p>
<p dir="auto">Alox is a different matter, bolts would be easier.</p>
]]></description><link>https://multitool.ninja/post/523586</link><guid isPermaLink="true">https://multitool.ninja/post/523586</guid><dc:creator><![CDATA[Neil]]></dc:creator><pubDate>Wed, 28 Sep 2011 21:01:52 GMT</pubDate></item><item><title><![CDATA[Reply to M2.5 bolts on Wed, 28 Sep 2011 20:58:34 GMT]]></title><description><![CDATA[<p dir="auto">Wasn't there an issue with the threads wearing down a little? <img src="/assets/uploads/smileys/thinking.gif" alt=":think:" title="Thinking" class="forum-smiley emoji" />  I could be making that up though.</p>
]]></description><link>https://multitool.ninja/post/523585</link><guid isPermaLink="true">https://multitool.ninja/post/523585</guid><dc:creator><![CDATA[Gareth]]></dc:creator><pubDate>Wed, 28 Sep 2011 20:58:34 GMT</pubDate></item><item><title><![CDATA[Reply to M2.5 bolts on Wed, 28 Sep 2011 20:42:56 GMT]]></title><description><![CDATA[<p dir="auto">Years ago I used them for doing test fits but then fitted brass rod for final assembly.  Don't think I ever fully assembled a knife with them though.</p>
<p dir="auto">A chap over on SOSAK, might have been * spudman* <img src="/assets/uploads/smileys/thinking.gif" alt=":think:" title="Thinking" class="forum-smiley emoji" /> made one like it.  I don't know how it turned out in the long run.</p>
]]></description><link>https://multitool.ninja/post/523578</link><guid isPermaLink="true">https://multitool.ninja/post/523578</guid><dc:creator><![CDATA[Neil]]></dc:creator><pubDate>Wed, 28 Sep 2011 20:42:56 GMT</pubDate></item></channel></rss>