<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0"><channel><title><![CDATA[Laminating metals questions]]></title><description><![CDATA[<p dir="auto">This is something I have been pondering for a while.<br />
Now imagine this bit of steel, 3mm thick but it looks pretty dull, It's not a knife blade, it's almost a scale but not quite.<br />
Anyway it has to be very very tough, I drop tools on concrete lets say...</p>
<p dir="auto">I fancy laminating two titanium sheets at 1mm, with a Damascus inner layer at 1mm also...Skeletonising it you can see where this is going I am sure...damascus showing through where i drill and cut...</p>
<p dir="auto">I know resin probably would hold it if contacting surfaces were sanded to what 400 grit?<br />
But I want to try to make my own mosaic pins too, problem is, there will be no space for anything more than 2mm thick.<br />
The thinnest mosaic pins I have seen is 3.2mm</p>
<p dir="auto">I could maybe squeeze in 2.5mm but thats as big as I will be able to risk.</p>
<p dir="auto">I had the idea of using a 2-2.5mm fine steel tube filling it with resin then squeezing in 7 needles and trimming off.<br />
Would that work?<br />
I have no idea where to even start looking for steel tubes that thin in a good steel.<br />
Is it important to use high grade materials for the sheath of mosaic pins?</p>
<p dir="auto">Also how many of these do you think I should use?<br />
Honestly I have never tried anything like this and not sure how these actually hold in place other than pure friction and perhaps a smidgen of epoxy, when I say resin btw, I mean epoxy stuff...</p>
<p dir="auto">Friction is probably fine for larger knife handle slabs where there is more than 10mm of contact, but on 3mm scales for durable tough use?</p>
]]></description><link>https://multitool.ninja/topic/35337/laminating-metals-questions</link><generator>RSS for Node</generator><lastBuildDate>Thu, 19 Nov 2026 20:00:12 GMT</lastBuildDate><atom:link href="https://multitool.ninja/topic/35337.rss" rel="self" type="application/rss+xml"/><pubDate>Thu, 09 Feb 2012 10:03:20 GMT</pubDate><ttl>60</ttl><item><title><![CDATA[Reply to Laminating metals questions on Sun, 12 Feb 2012 06:30:53 GMT]]></title><description><![CDATA[<p dir="auto"><a href="http://en.wikipedia.org/wiki/Eutectic_bonding" rel="nofollow ugc">http://en.wikipedia.org/wiki/Eutectic_bonding</a><br />
Eutectic bonding is the way to go. Would make awesome blade material too if it had a damascus center.</p>
<p dir="auto"><a href="http://www.youtube.com/watch?v=Nt7RHjgbjZE#" rel="nofollow ugc">mokume making</a><br />
Stainless damascus and titanium will bond well. You basically polish the surfaces of the metal on a glass or flat granite tile with silicon carbide paper until it's clean and shiny and flat. Then you clamp them together like in the video and heat them to about 50 F lower than the melting temp of your lowest melting temp metal. If they are very clean and polished that means almost no oxygen is between the pieces so instead of oxidizing the metals react with each other exchanging ions and electrons and positrons and whatever and they bond forming a very thin layer of an alloy of both metals.  It's neat stuff if you can make it work.</p>
]]></description><link>https://multitool.ninja/post/571644</link><guid isPermaLink="true">https://multitool.ninja/post/571644</guid><dc:creator><![CDATA[bushidomosquito]]></dc:creator><pubDate>Sun, 12 Feb 2012 06:30:53 GMT</pubDate></item><item><title><![CDATA[Reply to Laminating metals questions on Fri, 10 Feb 2012 04:11:04 GMT]]></title><description><![CDATA[<p dir="auto">Just go solid damascus, that would look sweet skeletonized anyhow.  And its steel, not soft alumimun etc, its going to be pretty durable.</p>
<p dir="auto">Btw, I admire your enthusiasm!  Tough when you have more ideas than you do time!  Well thats how I feel usually anyhow  :D</p>
]]></description><link>https://multitool.ninja/post/570837</link><guid isPermaLink="true">https://multitool.ninja/post/570837</guid><dc:creator><![CDATA[Syph007]]></dc:creator><pubDate>Fri, 10 Feb 2012 04:11:04 GMT</pubDate></item><item><title><![CDATA[Reply to Laminating metals questions on Fri, 10 Feb 2012 02:52:43 GMT]]></title><description><![CDATA[<p dir="auto">Good luck! Joining two pieces of different metals is going to be tricky to say the least. My only option would be to use pins through the entire tool. Hard pins at that. If you did that then maybe some sort of bonding agent could be used to hold them together.</p>
]]></description><link>https://multitool.ninja/post/570815</link><guid isPermaLink="true">https://multitool.ninja/post/570815</guid><dc:creator><![CDATA[tattoosteve99]]></dc:creator><pubDate>Fri, 10 Feb 2012 02:52:43 GMT</pubDate></item><item><title><![CDATA[Reply to Laminating metals questions on Fri, 10 Feb 2012 01:24:27 GMT]]></title><description><![CDATA[<p dir="auto">I had not even thought of that.<br />
How would I find out this?<br />
My plan was to use 6a4tlv titanium, Is that the right name...<br />
And a dark visually speaking Damascus, which I have been unable to find from damascus suppliers, so I would have to have it made.</p>
]]></description><link>https://multitool.ninja/post/570786</link><guid isPermaLink="true">https://multitool.ninja/post/570786</guid><dc:creator><![CDATA[8thsinner]]></dc:creator><pubDate>Fri, 10 Feb 2012 01:24:27 GMT</pubDate></item><item><title><![CDATA[Reply to Laminating metals questions on Thu, 09 Feb 2012 10:43:20 GMT]]></title><description><![CDATA[<p dir="auto">Sidenote: Make sure that the different metals you use for laminating expand equally with temperature (same coefficients), otherwise the whole thing may warp and bend. (Think bimetallic strip).</p>
]]></description><link>https://multitool.ninja/post/570489</link><guid isPermaLink="true">https://multitool.ninja/post/570489</guid><dc:creator><![CDATA[dks]]></dc:creator><pubDate>Thu, 09 Feb 2012 10:43:20 GMT</pubDate></item></channel></rss>