<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0"><channel><title><![CDATA[Polishing SAK Cellidor Scales.]]></title><description><![CDATA[<p dir="auto">So i just finished polishing a couple of sets of Cellidor Victorinox scales. One red, One black.</p>
<p dir="auto">I wanted to leave a record in-case anyone else new to this wanted to polish up a few knives.</p>
<p dir="auto">I did it without removing the scales, using some clear tape to prevent polish getting into areas it shouldn't.</p>
<p dir="auto">For anyone looking for advice on polish, i used "Novus Plastic Polish" available from The Container Store for $9.99 for a multi pack. ( 2oz No.1, 2oz No.2, 2oz No.3 and some paper cloths)</p>
<p dir="auto">No. 3 is for medium depth scratches and leaves a slight matt finish.<br />
Then lots of gentle rubbing with No. 2 returns each scale to a perfect glossy shine.</p>
<p dir="auto">I would recommend using disposable kitchen paper with the No. 3, grit paste and a super soft old cotton t-shirt with the No. 2 paste.</p>
<p dir="auto">No. 1 is just a cleaning solution, anti-static etc. Use it to clean the scales etc. before polishing and to keep them clean and dust free. It does not appear to have any polishing actions.</p>
<p dir="auto">I managed to restore both sets to a factory grade finish.</p>
<p dir="auto">Hope this is useful to someone.</p>
<p dir="auto"><a href="http://www.novuspolish.com/" rel="nofollow ugc">http://www.novuspolish.com/</a><br />
<a href="http://www.containerstore.com/shop?productId=10025445&amp;N=&amp;Ntt=Nexus+plastic+polish" rel="nofollow ugc">http://www.containerstore.com/shop?productId=10025445&amp;N=&amp;Ntt=Nexus+plastic+polish</a></p>
]]></description><link>https://multitool.ninja/topic/37961/polishing-sak-cellidor-scales</link><generator>RSS for Node</generator><lastBuildDate>Thu, 19 Nov 2026 23:48:55 GMT</lastBuildDate><atom:link href="https://multitool.ninja/topic/37961.rss" rel="self" type="application/rss+xml"/><pubDate>Sun, 03 Jun 2012 20:58:56 GMT</pubDate><ttl>60</ttl><item><title><![CDATA[Reply to Polishing SAK Cellidor Scales. on Thu, 04 Jul 2019 19:58:44 GMT]]></title><description><![CDATA[<p dir="auto">The disks of removing make-up that ladies wear greatly improve the result of any polish</p>
]]></description><link>https://multitool.ninja/post/1962915</link><guid isPermaLink="true">https://multitool.ninja/post/1962915</guid><dc:creator><![CDATA[Aligator]]></dc:creator><pubDate>Thu, 04 Jul 2019 19:58:44 GMT</pubDate></item><item><title><![CDATA[Reply to Polishing SAK Cellidor Scales. on Thu, 04 Jul 2019 13:49:08 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/knerml" aria-label="Profile: Knerml">@<bdi>Knerml</bdi></a> <a href="/post/1962600">said</a>:<br />
Just purchased a used Hiker on eBay for $10.</p>
<p dir="auto">The knife was in really good shape, expect for heavy scale wear.</p>
<p dir="auto">Not wanting to invest in a special polish for for my SAKs, I used what I had on hand:</p>
<ol>
<li>Ultra fine sand paper</li>
<li>Meguiar's Ultimate Compound</li>
<li>Meguiar's Ultimate Polish</li>
</ol>
<p dir="auto">Worked great.</p>
<p dir="auto">I would think just about any automotive rubbing compound and polish will work.</p>
</blockquote>
<p dir="auto"><img src="/assets/uploads/smileys/agreesign.gif" alt=":iagree:" title="I agree" class="forum-smiley emoji" /></p>
<p dir="auto">I use the fine sand paper and Turtle Wax Heavy Duty Rubbing Compound,and Turtle Wax Light to Medium Rubbing Compound....basically the same thing....it works fine. :D</p>
]]></description><link>https://multitool.ninja/post/1962623</link><guid isPermaLink="true">https://multitool.ninja/post/1962623</guid><dc:creator><![CDATA[VICMAN]]></dc:creator><pubDate>Thu, 04 Jul 2019 13:49:08 GMT</pubDate></item><item><title><![CDATA[Reply to Polishing SAK Cellidor Scales. on Thu, 04 Jul 2019 13:31:59 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/knerml" aria-label="Profile: Knerml">@<bdi>Knerml</bdi></a> <a href="/post/1962600">said</a>:<br />
I would think just about any automotive rubbing compound and polish will work.</p>
</blockquote>
<p dir="auto">I bet you are right!  <img src="/assets/uploads/smileys/like-sign.gif" alt=":like:" title="I like this" class="forum-smiley emoji" /></p>
<p dir="auto">And welcome to MTo.  <img src="/assets/uploads/smileys/wave.gif" alt=":waving:" title="waving" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1962609</link><guid isPermaLink="true">https://multitool.ninja/post/1962609</guid><dc:creator><![CDATA[Nix]]></dc:creator><pubDate>Thu, 04 Jul 2019 13:31:59 GMT</pubDate></item><item><title><![CDATA[Reply to Polishing SAK Cellidor Scales. on Thu, 04 Jul 2019 13:31:02 GMT]]></title><description><![CDATA[<p dir="auto">Welcome.  Glad you were able to use stuff you already had to get the scales polished up.</p>
]]></description><link>https://multitool.ninja/post/1962608</link><guid isPermaLink="true">https://multitool.ninja/post/1962608</guid><dc:creator><![CDATA[Aloha]]></dc:creator><pubDate>Thu, 04 Jul 2019 13:31:02 GMT</pubDate></item><item><title><![CDATA[Reply to Polishing SAK Cellidor Scales. on Thu, 04 Jul 2019 13:23:14 GMT]]></title><description><![CDATA[<p dir="auto">Just purchased a used Hiker on eBay for $10.</p>
<p dir="auto">The knife was in really good shape, expect for heavy scale wear.</p>
<p dir="auto">Not wanting to invest in a special polish for for my SAKs, I used what I had on hand:</p>
<ol>
<li>Ultra fine sand paper</li>
<li>Meguiar's Ultimate Compound</li>
<li>Meguiar's Ultimate Polish</li>
</ol>
<p dir="auto">Worked great.</p>
<p dir="auto">I would think just about any automotive rubbing compound and polish will work.</p>
]]></description><link>https://multitool.ninja/post/1962600</link><guid isPermaLink="true">https://multitool.ninja/post/1962600</guid><dc:creator><![CDATA[Knerml]]></dc:creator><pubDate>Thu, 04 Jul 2019 13:23:14 GMT</pubDate></item><item><title><![CDATA[Reply to Polishing SAK Cellidor Scales. on Fri, 24 May 2019 23:43:22 GMT]]></title><description><![CDATA[<p dir="auto">Thank you for the info here.</p>
]]></description><link>https://multitool.ninja/post/1938473</link><guid isPermaLink="true">https://multitool.ninja/post/1938473</guid><dc:creator><![CDATA[mikulichj]]></dc:creator><pubDate>Fri, 24 May 2019 23:43:22 GMT</pubDate></item><item><title><![CDATA[Reply to Polishing SAK Cellidor Scales. on Fri, 14 Dec 2018 18:10:25 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/mechanickal" aria-label="Profile: Mechanickal">@<bdi>Mechanickal</bdi></a> <a href="/post/1828774">said</a>:<br />
Brandname is Gunson on my kit.</p>
<p dir="auto">Son of a gun I guess <img src="/assets/uploads/smileys/shrug.gif" alt=":shrug:" title="Shrug" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto"><img src="https://media.giphy.com/media/5gw0VWGbgNm8w/200w.gif" alt="" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/1828862</link><guid isPermaLink="true">https://multitool.ninja/post/1828862</guid><dc:creator><![CDATA[Reinier]]></dc:creator><pubDate>Fri, 14 Dec 2018 18:10:25 GMT</pubDate></item><item><title><![CDATA[Reply to Polishing SAK Cellidor Scales. on Fri, 14 Dec 2018 16:22:00 GMT]]></title><description><![CDATA[<p dir="auto">Brandname is Gunson on my kit.</p>
<p dir="auto">Son of a gun I guess <img src="/assets/uploads/smileys/shrug.gif" alt=":shrug:" title="Shrug" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1828774</link><guid isPermaLink="true">https://multitool.ninja/post/1828774</guid><dc:creator><![CDATA[Mechanickal]]></dc:creator><pubDate>Fri, 14 Dec 2018 16:22:00 GMT</pubDate></item><item><title><![CDATA[Reply to Polishing SAK Cellidor Scales. on Fri, 14 Dec 2018 14:48:56 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/nix" aria-label="Profile: Nix">@<bdi>Nix</bdi></a> <a href="/post/1827837">said</a>:<br />
Very nice!</p>
<p dir="auto">Does the kit have a brand name?   <img src="/assets/uploads/smileys/poke2.gif" alt=":pok:" title="pok" class="forum-smiley emoji" /></p>
<p dir="auto">And, does it work on translucent scales....?   <img src="/assets/uploads/smileys/thinking.gif" alt=":think:" title="Thinking" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">I use a headlight polishing kit on my SAKs as well.  It's called Quixx.  Kinda pricey but works very well.</p>
]]></description><link>https://multitool.ninja/post/1828659</link><guid isPermaLink="true">https://multitool.ninja/post/1828659</guid><dc:creator><![CDATA[Myron]]></dc:creator><pubDate>Fri, 14 Dec 2018 14:48:56 GMT</pubDate></item><item><title><![CDATA[Reply to Polishing SAK Cellidor Scales. on Thu, 13 Dec 2018 16:55:41 GMT]]></title><description><![CDATA[<p dir="auto">Nice, I use those nail pads for light sharpening and touching up the edges on my knives (start with 4 go to 7) . Works great and gives a good polished edge when finished. I get them at a dollar store (1$ a piece).<br />
Rich</p>
]]></description><link>https://multitool.ninja/post/1827907</link><guid isPermaLink="true">https://multitool.ninja/post/1827907</guid><dc:creator><![CDATA[Rich S]]></dc:creator><pubDate>Thu, 13 Dec 2018 16:55:41 GMT</pubDate></item><item><title><![CDATA[Reply to Polishing SAK Cellidor Scales. on Thu, 13 Dec 2018 15:41:41 GMT]]></title><description><![CDATA[<p dir="auto">Very nice!</p>
<p dir="auto">Does the kit have a brand name?   <img src="/assets/uploads/smileys/poke2.gif" alt=":pok:" title="pok" class="forum-smiley emoji" /></p>
<p dir="auto">And, does it work on translucent scales....?   <img src="/assets/uploads/smileys/thinking.gif" alt=":think:" title="Thinking" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1827837</link><guid isPermaLink="true">https://multitool.ninja/post/1827837</guid><dc:creator><![CDATA[Nix]]></dc:creator><pubDate>Thu, 13 Dec 2018 15:41:41 GMT</pubDate></item><item><title><![CDATA[Reply to Polishing SAK Cellidor Scales. on Thu, 13 Dec 2018 15:35:11 GMT]]></title><description><![CDATA[<p dir="auto">Since yesterday I use a headlight restoration kit (some French cars are known for their headlights turning yellow over time) that my parents wanted to throw out.</p>
<p dir="auto">It works great!!</p>
<p dir="auto">2 different rubbing pads and ultra fine sanding paper, along with 2 different diamond pastes.</p>
<p dir="auto">A shiny SAK within seconds!</p>
<p dir="auto"><img src="https://uploads.tapatalk-cdn.com/20181213/d0062a8423e51b6142b0120fc582abbf.jpg" alt="" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/1827827</link><guid isPermaLink="true">https://multitool.ninja/post/1827827</guid><dc:creator><![CDATA[Mechanickal]]></dc:creator><pubDate>Thu, 13 Dec 2018 15:35:11 GMT</pubDate></item><item><title><![CDATA[Reply to Polishing SAK Cellidor Scales. on Thu, 13 Dec 2018 00:23:35 GMT]]></title><description><![CDATA[<p dir="auto">I'll keep my eyes open for those!   <img src="/assets/uploads/smileys/like-sign.gif" alt=":like:" title="I like this" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1827431</link><guid isPermaLink="true">https://multitool.ninja/post/1827431</guid><dc:creator><![CDATA[Nix]]></dc:creator><pubDate>Thu, 13 Dec 2018 00:23:35 GMT</pubDate></item><item><title><![CDATA[Reply to Polishing SAK Cellidor Scales. on Thu, 13 Dec 2018 00:18:06 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/nix" aria-label="Profile: Nix">@<bdi>Nix</bdi></a> <a href="/post/1827316">said</a>:<br />
A bit of a necro thread, but one worth reviving, I think.</p>
<p dir="auto">Like the OP, I've used Novus plastic cleaner/scratch remover to clean up a few celidor scales in the past. However I'd never tried to polish translucent scales. Today I pulled out a translucent blue Tinker and attempted to clean up some fairly rough scales.....</p>
<p dir="auto">Before, shield side:</p>
<p dir="auto"><img src="https://i.imgur.com/EfQEQ2h.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">This side has some scratches and one spot, almost right on the shield, where I grabbed the SAK while I had some acetone on my fingers. Instant melt!</p>
<p dir="auto">Before, driver side:</p>
<p dir="auto"><img src="https://i.imgur.com/uiAiuMF.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Again, some scratches and an acetone melt spot. Ooooops.</p>
<p dir="auto">The spa regimen:</p>
<p dir="auto"><img src="https://i.imgur.com/nrvjL5w.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">I went in order of 3-2-1.  Seemed only smart.</p>
<p dir="auto">After, shield side:</p>
<p dir="auto"><img src="https://i.imgur.com/HFKonHN.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Much better! This was accomplished in less than 5 minutes. The acetone thumb print is still fairly prominent, but overall a nice improvement. I think if I want to remove that thumb [rint some automotive sandpaper might be called for.</p>
<p dir="auto">After, driver side:</p>
<p dir="auto"><img src="https://i.imgur.com/NqonLHP.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Again, much better! I suspect that with a bit more time and effort, this could be made even sharper, but I was satisfied with the results.</p>
<p dir="auto">Overall, I was really please to see the scale 1) NOT turn some cloudy, opaque color, and 2) some significant scratches get cleaned up easily. I'm giving these Novus products two big thumbs up.  <img src="/assets/uploads/smileys/thumbsup.gif" alt=":2tu:" title="2 thumbs up" class="forum-smiley emoji" /></p>
<p dir="auto">For those of you who might have a hard time finding Novus. I got this product and a motorcycle dealer's shop. It was recommended for taking scratches out of windscreens and even face shields. So if Novus isn't available, you might try looking for a plastic polish at a place that sells helmets or plastic windscreens.</p>
<p dir="auto">Now....sandpaper that acetone melt spot out....or leave it be...... <img src="/assets/uploads/smileys/thinking.gif" alt=":think:" title="Thinking" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">That's a great job  <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/like-sign.gif" alt=":like:" title="I like this" class="forum-smiley emoji" /></p>
<p dir="auto">I use 6 way nail buffer pads for that myself..., they do a great job and are dirt cheap. Like "budget" micromesh pads, up to very fine grits for great polish and shine  <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
<p dir="auto"><img src="https://i.ebayimg.com/images/g/m6AAAOSwaA5Wjkyn/s-l1600.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="https://i.ebayimg.com/images/g/pfEAAOSwFnxbqHwA/s-l1600.jpg" alt="" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/1827422</link><guid isPermaLink="true">https://multitool.ninja/post/1827422</guid><dc:creator><![CDATA[MacGyver]]></dc:creator><pubDate>Thu, 13 Dec 2018 00:18:06 GMT</pubDate></item><item><title><![CDATA[Reply to Polishing SAK Cellidor Scales. on Wed, 12 Dec 2018 22:50:40 GMT]]></title><description><![CDATA[<p dir="auto">A bit of a necro thread, but one worth reviving, I think.</p>
<p dir="auto">Like the OP, I've used Novus plastic cleaner/scratch remover to clean up a few celidor scales in the past. However I'd never tried to polish translucent scales. Today I pulled out a translucent blue Tinker and attempted to clean up some fairly rough scales.....</p>
<p dir="auto">Before, shield side:</p>
<p dir="auto"><img src="https://i.imgur.com/EfQEQ2h.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">This side has some scratches and one spot, almost right on the shield, where I grabbed the SAK while I had some acetone on my fingers. Instant melt!</p>
<p dir="auto">Before, driver side:</p>
<p dir="auto"><img src="https://i.imgur.com/uiAiuMF.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Again, some scratches and an acetone melt spot. Ooooops.</p>
<p dir="auto">The spa regimen:</p>
<p dir="auto"><img src="https://i.imgur.com/nrvjL5w.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">I went in order of 3-2-1.  Seemed only smart.</p>
<p dir="auto">After, shield side:</p>
<p dir="auto"><img src="https://i.imgur.com/HFKonHN.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Much better! This was accomplished in less than 5 minutes. The acetone thumb print is still fairly prominent, but overall a nice improvement. I think if I want to remove that thumb [rint some automotive sandpaper might be called for.</p>
<p dir="auto">After, driver side:</p>
<p dir="auto"><img src="https://i.imgur.com/NqonLHP.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Again, much better! I suspect that with a bit more time and effort, this could be made even sharper, but I was satisfied with the results.</p>
<p dir="auto">Overall, I was really please to see the scale 1) NOT turn some cloudy, opaque color, and 2) some significant scratches get cleaned up easily. I'm giving these Novus products two big thumbs up.  <img src="/assets/uploads/smileys/thumbsup.gif" alt=":2tu:" title="2 thumbs up" class="forum-smiley emoji" /></p>
<p dir="auto">For those of you who might have a hard time finding Novus. I got this product and a motorcycle dealer's shop. It was recommended for taking scratches out of windscreens and even face shields. So if Novus isn't available, you might try looking for a plastic polish at a place that sells helmets or plastic windscreens.</p>
<p dir="auto">Now....sandpaper that acetone melt spot out....or leave it be...... <img src="/assets/uploads/smileys/thinking.gif" alt=":think:" title="Thinking" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1827316</link><guid isPermaLink="true">https://multitool.ninja/post/1827316</guid><dc:creator><![CDATA[Nix]]></dc:creator><pubDate>Wed, 12 Dec 2018 22:50:40 GMT</pubDate></item><item><title><![CDATA[Reply to Polishing SAK Cellidor Scales. on Fri, 03 Feb 2017 20:04:02 GMT]]></title><description><![CDATA[<p dir="auto">Amici,<br />
The Novus polish is a cream or a paste if you will that comes in 2 different consistencies. Number 3 is coarse for those scales that are really dinged up, and number 2 is of the fine type meant as a finisher, or for scales that need a bit of tweaking as you were..</p>
<p dir="auto">I simply apply a small amount with a cotton ball, and use circular motions. Follow up using the same method with number 2, and then buffing to a nice sheen.  It really is quite remarkable, how nice they turn out..</p>
<p dir="auto">Cheers,<br />
Serge</p>
]]></description><link>https://multitool.ninja/post/1421575</link><guid isPermaLink="true">https://multitool.ninja/post/1421575</guid><dc:creator><![CDATA[sergemaster]]></dc:creator><pubDate>Fri, 03 Feb 2017 20:04:02 GMT</pubDate></item><item><title><![CDATA[Reply to Polishing SAK Cellidor Scales. on Fri, 03 Feb 2017 18:32:49 GMT]]></title><description><![CDATA[<p dir="auto">One issue I've been having woth the polishing compound I'm using is that it splatters everywhere when I use the dremel tool with polishing ball.</p>
<p dir="auto">Is the Novus stuff more of a paste than a liquid? I'd like to try something thicker that makes less of a mess.</p>
<p dir="auto">The stuff I use works well, but I have to do it inside a cardboard box to avoid splatter all over the workbench.</p>
]]></description><link>https://multitool.ninja/post/1421540</link><guid isPermaLink="true">https://multitool.ninja/post/1421540</guid><dc:creator><![CDATA[JamesJ]]></dc:creator><pubDate>Fri, 03 Feb 2017 18:32:49 GMT</pubDate></item><item><title><![CDATA[Reply to Polishing SAK Cellidor Scales. on Fri, 03 Feb 2017 18:21:50 GMT]]></title><description><![CDATA[<p dir="auto">Amici,<br />
I had to bump this thread from the ether since on a whim, I recently picked up a Novus Plastic Polish kit for a great price and I wanted to see what it could do. Sure we all know the Victorinox secret regarding scales by now that they're replaceable so who cares if they get dinged up, just replace them!!</p>
<p dir="auto">But for those one of a kind cases where you don't want to, this product really does the trick. I recently acquired another NOS Ranger with flouted corkscrew as well as those nice solid Cellidor scales. Well they were a little dinged up. So instead of popping off and replacing with a pair of nice, but  hollowed out Cellidor, I decided to give this product a try.</p>
<p dir="auto">Well it worked remarkably well! So if you're in the market to refurbish a set of old scales, the Novus Plastic Polish kit will definitely do the job..</p>
<p dir="auto">Cheers,<br />
Serge</p>
]]></description><link>https://multitool.ninja/post/1421532</link><guid isPermaLink="true">https://multitool.ninja/post/1421532</guid><dc:creator><![CDATA[sergemaster]]></dc:creator><pubDate>Fri, 03 Feb 2017 18:21:50 GMT</pubDate></item><item><title><![CDATA[Reply to Polishing SAK Cellidor Scales. on Mon, 27 Jan 2014 17:49:32 GMT]]></title><description><![CDATA[<p dir="auto">In my early days as a collector, tried various products, Solvolautosol etc.<br />
Yes , even Brasso works. Hours of fun !!<br />
However, unless sentimentally attached to the old scales, and their associated 'battle scars', it is far easier to scrap the damaged ones, and replace with new scales !!</p>
]]></description><link>https://multitool.ninja/post/836144</link><guid isPermaLink="true">https://multitool.ninja/post/836144</guid><dc:creator><![CDATA[Longtermsakfan]]></dc:creator><pubDate>Mon, 27 Jan 2014 17:49:32 GMT</pubDate></item><item><title><![CDATA[Reply to Polishing SAK Cellidor Scales. on Mon, 13 Jan 2014 08:42:02 GMT]]></title><description><![CDATA[<p dir="auto">Oh that plastic restoration stuff tickles my fancy! Have some headlight restoration stuff at shop, suppose it is similar to this. Will get, thank you!</p>
]]></description><link>https://multitool.ninja/post/828132</link><guid isPermaLink="true">https://multitool.ninja/post/828132</guid><dc:creator><![CDATA[13rus]]></dc:creator><pubDate>Mon, 13 Jan 2014 08:42:02 GMT</pubDate></item><item><title><![CDATA[Reply to Polishing SAK Cellidor Scales. on Mon, 13 Jan 2014 08:06:58 GMT]]></title><description><![CDATA[<p dir="auto">The BEST... end of story.</p>
<p dir="auto"></p><div class="card col-md-9 col-lg-6 position-relative link-preview p-0">



<a href="http://23.105.39.78/micromesh/acrylic_plastic_hand_kits.htm" title="404 Not Found">
<img src="http://23.105.39.78/img-sys/server_misconfigured.png" class="card-img-top not-responsive" style="max-height:15rem" alt="Link Preview Image" />
</a>





<div class="card-body">
<h5 class="card-title">
<a class="text-decoration-none" href="http://23.105.39.78/micromesh/acrylic_plastic_hand_kits.htm">
404 Not Found
</a>
</h5>
<p class="card-text line-clamp-3"></p>
</div>
<a href="http://23.105.39.78/micromesh/acrylic_plastic_hand_kits.htm" class="card-footer text-body-secondary small d-flex gap-2 align-items-center lh-2">



<img src="http://23.105.39.78/favicon.ico" alt="favicon" class="not-responsive overflow-hiddden" style="max-width:21px;max-height:21px" />



<p class="d-inline-block text-truncate mb-0"> <span class="text-secondary">(www.sisweb.com)</span></p>
</a>
</div><p></p>
]]></description><link>https://multitool.ninja/post/828123</link><guid isPermaLink="true">https://multitool.ninja/post/828123</guid><dc:creator><![CDATA[PTRSAK]]></dc:creator><pubDate>Mon, 13 Jan 2014 08:06:58 GMT</pubDate></item><item><title><![CDATA[Reply to Polishing SAK Cellidor Scales. on Mon, 13 Jan 2014 00:20:24 GMT]]></title><description><![CDATA[<p dir="auto">I use Mother's Mag wheel polish on just about everything from SAK scales to the chrome bumper of a 1969 Chevy truck.  I have bought many user knives on eBay and brought them back to life with the stuff.</p>
]]></description><link>https://multitool.ninja/post/827982</link><guid isPermaLink="true">https://multitool.ninja/post/827982</guid><dc:creator><![CDATA[powernoodle]]></dc:creator><pubDate>Mon, 13 Jan 2014 00:20:24 GMT</pubDate></item><item><title><![CDATA[Reply to Polishing SAK Cellidor Scales. on Mon, 13 Jan 2014 00:02:29 GMT]]></title><description><![CDATA[<p dir="auto">For those not afraid to buy some ladies' items, a nail buffing block will take out a lot of surface scratches from cellidor scales  :D</p>
]]></description><link>https://multitool.ninja/post/827973</link><guid isPermaLink="true">https://multitool.ninja/post/827973</guid><dc:creator><![CDATA[MWDP]]></dc:creator><pubDate>Mon, 13 Jan 2014 00:02:29 GMT</pubDate></item><item><title><![CDATA[Reply to Polishing SAK Cellidor Scales. on Sat, 11 Jan 2014 20:49:25 GMT]]></title><description><![CDATA[<p dir="auto">I renovate a lot of really trashed knives frequently. Many have pretty deep gouges as well as pocket wear (or worse).<br />
To fill really deep gouges I use two part Epoxy, let it set overnight, then 400/600/800/1500 wet and dry, all with lots of water. Finally buff the scales with Simichrome on a soft cloth. They get to a (usually) even better than factory finish, meaning they have a deep, burnished, highly polished look to them.<br />
No real need to remove the scales, though it can be a little easier if they are removed.</p>
]]></description><link>https://multitool.ninja/post/827305</link><guid isPermaLink="true">https://multitool.ninja/post/827305</guid><dc:creator><![CDATA[neillcurrie]]></dc:creator><pubDate>Sat, 11 Jan 2014 20:49:25 GMT</pubDate></item></channel></rss>