<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0"><channel><title><![CDATA[MT.O Prybar]]></title><description><![CDATA[<p dir="auto">At the last UK meet up i was talking to sparky415 about prybars and he put forward a number of interesting and original ideas and suggestions on the subject.<br />
After finally getting round to printing my prybar i contacted Sparky again about his ideas and the possibility of putting together a printed prototype.<br />
With his design input i set about putting together a simple yet useful prybar based around improving the original widgy bar.</p>
<p dir="auto">This is what we came up:</p>
<p dir="auto"><img src="http://i194.photobucket.com/albums/z42/Toftylicious/EDC%20Keychain/MTOPrybar009b.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Including the MT.O logo with the O has a useable 1/4" hex driver was Sparky's great idea, but as he pointed out could be a source of contention.<br />
I contacted Grant and Travis to make sure it was ok and not only did they like it but gave some design input aswell, so here it is, the Official MT.O Prybar.</p>
<p dir="auto"><img src="http://i194.photobucket.com/albums/z42/Toftylicious/EDC%20Keychain/MTOPrybar012b.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">This single-piece tool can be used as a prybar and nail lifting tool, but also has a range of metric hex drivers (2.5, 3.2, 4, 5, 5.5 and 7mm), a bottle opener and a 1/4" hex bit driver.<br />
An o-ring can be installed in the tail to help secure a hex bit (8mm ID, 2.5mm section).<br />
The prybar can be secured to a keychain or lanyard with a No.2 McGizmo clip or similar 25mm gate clip through the 1/4" hex hole or with a small split ring through the MT.O dot.</p>
<p dir="auto">Due to future manufacturing considerations i have designed this tool with two different thicknesses: 3mm and 5mm. The first picture shows the thinner tool and the second picture shows the thicker version.</p>
<p dir="auto"><img src="http://i194.photobucket.com/albums/z42/Toftylicious/EDC%20Keychain/MTOPrybar013b.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Both these models are up on shapeways, just search for 'MT.O Prybar' or click <a href="http://www.shapeways.com/model/750932/mt-o-prybar-3mm.html?li=productBox-search" rel="nofollow ugc">here (3mm)</a> or <a href="http://www.shapeways.com/model/759721/mt-o-prybar-5mm.html?li=productBox-search" rel="nofollow ugc">here (5mm)</a><br />
As this is a community project, no commission has been added to the price but they're still expensive so i plan to have a number ofthese tools cut from high grade stainless blade steel in the near future.</p>
<p dir="auto">In the mean time i've ordered a prototype from shapeways and when it arrives and is proven to meet requirements i'll start a pass-around thread for it.</p>
<p dir="auto">Please feel free to leave any suggestions and/or feedback, both positive and negative.</p>
]]></description><link>https://multitool.ninja/topic/40657/mto-prybar</link><generator>RSS for Node</generator><lastBuildDate>Mon, 16 Nov 2026 19:05:05 GMT</lastBuildDate><atom:link href="https://multitool.ninja/topic/40657.rss" rel="self" type="application/rss+xml"/><pubDate>Sun, 04 Nov 2012 16:53:47 GMT</pubDate><ttl>60</ttl><item><title><![CDATA[Reply to MT.O Prybar on Sat, 04 Apr 2015 11:10:57 GMT]]></title><description><![CDATA[<p dir="auto">I never did.<br />
However the cutting of items from sheet metal isn't all that expensive per unit, if the sheet is filled. If we collected everyone together on the forum who wanted tools and items cut from some form of stainless tool steel, then each item should cost $10 or less, depending on size.</p>
]]></description><link>https://multitool.ninja/post/1067438</link><guid isPermaLink="true">https://multitool.ninja/post/1067438</guid><dc:creator><![CDATA[Tofty]]></dc:creator><pubDate>Sat, 04 Apr 2015 11:10:57 GMT</pubDate></item><item><title><![CDATA[Reply to MT.O Prybar on Fri, 03 Apr 2015 17:43:19 GMT]]></title><description><![CDATA[<p dir="auto">Thanks Tofty.   You mentioned getting these cut out of steel.   Did you ever do that?</p>
<p dir="auto">I have always wanted to design my own OPMT, aand I have a big collection of available tools.   The 3D printing at Shapeways provides an awesome prototyping method.   How close are the tolerances on the wrenches in the printed tools,  in your experience?</p>
<p dir="auto">BTW, I bought the nickel silver version of your 5mm pry tool.   I will post pix and comments when I get it.</p>
<p dir="auto">Cheers,</p>
]]></description><link>https://multitool.ninja/post/1067050</link><guid isPermaLink="true">https://multitool.ninja/post/1067050</guid><dc:creator><![CDATA[gdc]]></dc:creator><pubDate>Fri, 03 Apr 2015 17:43:19 GMT</pubDate></item><item><title><![CDATA[Reply to MT.O Prybar on Fri, 03 Apr 2015 11:30:10 GMT]]></title><description><![CDATA[<p dir="auto">Although I haven't done any destructive testing with the Shapeways' bronze infused steel, it is stronger than you might expect. I've had no feedback from anyone about any of the prybars breaking in use.</p>
<p dir="auto">For instance, the black T-bar tool shown above has a side cutout for use as a bottle opener. Unfortunately the early version wasn't designed very well and the first time I tried to use it I ended up snapping the top off the bottle, with the scars to prove it. The rather weak looking bottle opener didn't take any damage though.</p>
<p dir="auto">The prybars are 3mm thick as that's the minimum boundary box thickness that Shapeways will print. I have printed thinner tools, but they have to have some element that sticks up beyond 3mm. 5mm is pretty much overkill.</p>
<p dir="auto">However this material shouldn't be considered a valid alternative to traditional tool steels, it's just the only thing we currently have to play with, using 3D printing.</p>
]]></description><link>https://multitool.ninja/post/1066821</link><guid isPermaLink="true">https://multitool.ninja/post/1066821</guid><dc:creator><![CDATA[Tofty]]></dc:creator><pubDate>Fri, 03 Apr 2015 11:30:10 GMT</pubDate></item><item><title><![CDATA[Reply to MT.O Prybar on Wed, 01 Apr 2015 18:45:46 GMT]]></title><description><![CDATA[<p dir="auto">I hope someone who knows a thing or five about bronze and sintering will chime in, because personally I've mainly enjoyed my 3mm tool as a cool bottle opener. :D</p>
]]></description><link>https://multitool.ninja/post/1065695</link><guid isPermaLink="true">https://multitool.ninja/post/1065695</guid><dc:creator><![CDATA[Steinar]]></dc:creator><pubDate>Wed, 01 Apr 2015 18:45:46 GMT</pubDate></item><item><title><![CDATA[Reply to MT.O Prybar on Wed, 01 Apr 2015 18:05:50 GMT]]></title><description><![CDATA[<p dir="auto">Okay,  so I am really intrigued with how strong a out can be when made in a 3d printer.   I just ordered the 5mm pry tool in steel.  Has anyone really put one of these to the test?   I know nothing about 3d printing so I am very interested in how this material will hold up.</p>
]]></description><link>https://multitool.ninja/post/1065678</link><guid isPermaLink="true">https://multitool.ninja/post/1065678</guid><dc:creator><![CDATA[gdc]]></dc:creator><pubDate>Wed, 01 Apr 2015 18:05:50 GMT</pubDate></item><item><title><![CDATA[Reply to MT.O Prybar on Mon, 13 Oct 2014 21:01:19 GMT]]></title><description><![CDATA[<p dir="auto">Time to squirrel up for the fish ;)</p>
]]></description><link>https://multitool.ninja/post/963522</link><guid isPermaLink="true">https://multitool.ninja/post/963522</guid><dc:creator><![CDATA[BIG-TARGET]]></dc:creator><pubDate>Mon, 13 Oct 2014 21:01:19 GMT</pubDate></item><item><title><![CDATA[Reply to MT.O Prybar on Wed, 08 Oct 2014 12:48:47 GMT]]></title><description><![CDATA[<p dir="auto"><img src="/assets/uploads/smileys/woohoo.gif" alt=":woohoo:" title="Woohoo" class="forum-smiley emoji" /><br />
Was just about to order more USB Tools...<br />
<img src="/assets/uploads/smileys/woohoo.gif" alt=":woohoo:" title="Woohoo" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/960785</link><guid isPermaLink="true">https://multitool.ninja/post/960785</guid><dc:creator><![CDATA[Etherealicer]]></dc:creator><pubDate>Wed, 08 Oct 2014 12:48:47 GMT</pubDate></item><item><title><![CDATA[Reply to MT.O Prybar on Wed, 08 Oct 2014 12:43:18 GMT]]></title><description><![CDATA[<p dir="auto">Just a heads up for anyone who has, in the past, found these printed multitools of interest.....<br />
Yesterday Shapeways implemented a change to their pricing structure, that has made the majority of models cheaper, in stainless steel and plastic.<br />
Although for some people on Shapeways, especially the scale modellers, prices have actually increased, as the new prices make multi-part models a more expensive option.<br />
However, for me at least, pretty much all my tools have become cheaper. On average, my tools have been reduced in price by 30%.<br />
Here's the link: <a href="https://www.shapeways.com/shops/tofty" rel="nofollow ugc">https://www.shapeways.com/shops/tofty</a></p>
<p dir="auto">Here is a breakdown of the price drop for the <a href="http://Multitool.org" rel="nofollow ugc">Multitool.org</a> Specific Tools, sold in there own shop:</p>
<p dir="auto">MT.O Prybar (3mm) - Was  €27.33, Now €19.22,<br />
MT.O Prybar (5mm) - Was  €38.78, Now €26.38,<br />
Fish Thing 2013 - Was  €23.70, Now €16.96,<br />
Challenge Coin 2013 - Was  €28.20, Now €21.42,<br />
Etherealicer's USB Tool - Was  €21.30, Now €16.96,</p>
<p dir="auto">These items con be found here: <a href="https://www.shapeways.com/designer/Multitool_Team" rel="nofollow ugc">https://www.shapeways.com/designer/Multitool_Team</a></p>
]]></description><link>https://multitool.ninja/post/960781</link><guid isPermaLink="true">https://multitool.ninja/post/960781</guid><dc:creator><![CDATA[Tofty]]></dc:creator><pubDate>Wed, 08 Oct 2014 12:43:18 GMT</pubDate></item><item><title><![CDATA[Reply to MT.O Prybar on Thu, 14 Nov 2013 13:05:12 GMT]]></title><description><![CDATA[<p dir="auto">Thanks a lot guys.<br />
I suppose the best thing i can take away from this is that since Shapeways have printed a few of the T-Bars for themselves, they should be taken along to the trade shows that Shapeways like to be seen at.<br />
So hopefully many hundreds of people will get to see and hold a one-piece multitool who probably wouldn't otherwise. Maybe a few people will be turn towards the possibilities of multitools as well as 3D printing's potential to easily offer exactly the right tool for the job and you rather than someone else's interpretation.</p>
<p dir="auto">(i just hope they bother to populate it with o-rings and hex bits, otherwise it's just an odd shaped piece of metal)</p>
]]></description><link>https://multitool.ninja/post/801539</link><guid isPermaLink="true">https://multitool.ninja/post/801539</guid><dc:creator><![CDATA[Tofty]]></dc:creator><pubDate>Thu, 14 Nov 2013 13:05:12 GMT</pubDate></item><item><title><![CDATA[Reply to MT.O Prybar on Wed, 13 Nov 2013 06:54:10 GMT]]></title><description><![CDATA[<p dir="auto">Very nice Tofty <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/801100</link><guid isPermaLink="true">https://multitool.ninja/post/801100</guid><dc:creator><![CDATA[stealth007s]]></dc:creator><pubDate>Wed, 13 Nov 2013 06:54:10 GMT</pubDate></item><item><title><![CDATA[Reply to MT.O Prybar on Tue, 12 Nov 2013 21:35:22 GMT]]></title><description><![CDATA[<p dir="auto">Very cool recognition of your work. <img src="/assets/uploads/smileys/hatsoff.gif" alt=":hatsoff:" title="Hats Off" class="forum-smiley emoji" /></p>
<p dir="auto">I'm carrying the original MTO prybar on my keyring since I got it back. :D Still doing great. <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /></p>
<p dir="auto"><img src="http://i1255.photobucket.com/albums/hh627/enki_ck/EDC/PA160029_zpse1aaa30b.jpg" alt="" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/800939</link><guid isPermaLink="true">https://multitool.ninja/post/800939</guid><dc:creator><![CDATA[enki_ck]]></dc:creator><pubDate>Tue, 12 Nov 2013 21:35:22 GMT</pubDate></item><item><title><![CDATA[Reply to MT.O Prybar on Tue, 12 Nov 2013 20:56:22 GMT]]></title><description><![CDATA[<p dir="auto"><img src="/assets/uploads/smileys/hatsoff.gif" alt=":hatsoff:" title="Hats Off" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/800920</link><guid isPermaLink="true">https://multitool.ninja/post/800920</guid><dc:creator><![CDATA[Taxi Dad]]></dc:creator><pubDate>Tue, 12 Nov 2013 20:56:22 GMT</pubDate></item><item><title><![CDATA[Reply to MT.O Prybar on Tue, 12 Nov 2013 20:30:53 GMT]]></title><description><![CDATA[<p dir="auto">Very cool mate well deserved <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/800914</link><guid isPermaLink="true">https://multitool.ninja/post/800914</guid><dc:creator><![CDATA[Zed]]></dc:creator><pubDate>Tue, 12 Nov 2013 20:30:53 GMT</pubDate></item><item><title><![CDATA[Reply to MT.O Prybar on Tue, 12 Nov 2013 18:48:38 GMT]]></title><description><![CDATA[<p dir="auto">Wow, that's a nice one! Congrats! <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
<p dir="auto">I really like the look of it 8)</p>
]]></description><link>https://multitool.ninja/post/800856</link><guid isPermaLink="true">https://multitool.ninja/post/800856</guid><dc:creator><![CDATA[AlephZero]]></dc:creator><pubDate>Tue, 12 Nov 2013 18:48:38 GMT</pubDate></item><item><title><![CDATA[Reply to MT.O Prybar on Tue, 12 Nov 2013 17:13:35 GMT]]></title><description><![CDATA[<p dir="auto">Nice one mate! <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/800809</link><guid isPermaLink="true">https://multitool.ninja/post/800809</guid><dc:creator><![CDATA[Gareth]]></dc:creator><pubDate>Tue, 12 Nov 2013 17:13:35 GMT</pubDate></item><item><title><![CDATA[Reply to MT.O Prybar on Tue, 12 Nov 2013 16:29:00 GMT]]></title><description><![CDATA[<p dir="auto">Yes it is!<br />
Congrats!</p>
<p dir="auto">sent from Nate's mobile</p>
]]></description><link>https://multitool.ninja/post/800784</link><guid isPermaLink="true">https://multitool.ninja/post/800784</guid><dc:creator><![CDATA[ducttapetech]]></dc:creator><pubDate>Tue, 12 Nov 2013 16:29:00 GMT</pubDate></item><item><title><![CDATA[Reply to MT.O Prybar on Tue, 12 Nov 2013 16:07:01 GMT]]></title><description><![CDATA[<p dir="auto">That's awesome!</p>
<p dir="auto">Congratulations!</p>
<p dir="auto">Def</p>
]]></description><link>https://multitool.ninja/post/800777</link><guid isPermaLink="true">https://multitool.ninja/post/800777</guid><dc:creator><![CDATA[Grant Lamontagne]]></dc:creator><pubDate>Tue, 12 Nov 2013 16:07:01 GMT</pubDate></item><item><title><![CDATA[Reply to MT.O Prybar on Tue, 12 Nov 2013 15:12:50 GMT]]></title><description><![CDATA[<p dir="auto">@ Sparky: All in good time.</p>
<p dir="auto">@ ducttapetech &amp; Itriant: Thanks guys, glad you like them.</p>
<p dir="auto">Just in case anyone is interested, my T-Bar tool has been chosen as one of the Shapeways Gift Guide ideas in the gadgets section:<br />
<a href="https://www.shapeways.com/gift-guide/give-gadgets?li=gift-guide" rel="nofollow ugc">https://www.shapeways.com/gift-guide/give-gadgets?li=gift-guide</a><br />
Ordering a T-Bar by November the 15th gets a $10 discount.</p>
<p dir="auto">I think it looks really good in the new black finish anyway.</p>
<p dir="auto"><a href="http://s194.photobucket.com/user/Toftylicious/media/EDC%20Keychain/T-Bar017_zpsb172790a.jpg.html" rel="nofollow ugc"><img src="http://i194.photobucket.com/albums/z42/Toftylicious/EDC%20Keychain/T-Bar017_zpsb172790a.jpg" alt="" class="img-markdown  img-fluid" /></a></p>
]]></description><link>https://multitool.ninja/post/800753</link><guid isPermaLink="true">https://multitool.ninja/post/800753</guid><dc:creator><![CDATA[Tofty]]></dc:creator><pubDate>Tue, 12 Nov 2013 15:12:50 GMT</pubDate></item><item><title><![CDATA[Reply to MT.O Prybar on Fri, 06 Sep 2013 04:26:19 GMT]]></title><description><![CDATA[<p dir="auto">Wow I really like the long bar!</p>
]]></description><link>https://multitool.ninja/post/771341</link><guid isPermaLink="true">https://multitool.ninja/post/771341</guid><dc:creator><![CDATA[ltriant]]></dc:creator><pubDate>Fri, 06 Sep 2013 04:26:19 GMT</pubDate></item><item><title><![CDATA[Reply to MT.O Prybar on Thu, 05 Sep 2013 08:31:09 GMT]]></title><description><![CDATA[<p dir="auto">That's some cool looking tools.</p>
<p dir="auto">sent from my mobile</p>
]]></description><link>https://multitool.ninja/post/771086</link><guid isPermaLink="true">https://multitool.ninja/post/771086</guid><dc:creator><![CDATA[ducttapetech]]></dc:creator><pubDate>Thu, 05 Sep 2013 08:31:09 GMT</pubDate></item><item><title><![CDATA[Reply to MT.O Prybar on Thu, 05 Sep 2013 05:42:28 GMT]]></title><description><![CDATA[<p dir="auto">Is it?  <img src="/assets/uploads/smileys/poke2.gif" alt=":pok:" title="pok" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/poke2.gif" alt=":pok:" title="pok" class="forum-smiley emoji" /></p>
<p dir="auto"><img src="/assets/uploads/smileys/popcorn.gif" alt=":popcorn:" title="Popcorn" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/771063</link><guid isPermaLink="true">https://multitool.ninja/post/771063</guid><dc:creator><![CDATA[Sparky415]]></dc:creator><pubDate>Thu, 05 Sep 2013 05:42:28 GMT</pubDate></item><item><title><![CDATA[Reply to MT.O Prybar on Wed, 04 Sep 2013 21:45:57 GMT]]></title><description><![CDATA[<p dir="auto">Right proper update time......</p>
<p dir="auto">Firstly: Star Driver 2.</p>
<p dir="auto"><a href="http://s194.photobucket.com/user/Toftylicious/media/EDC%20Keychain/StarDriver2002c_zpsbd6854db.jpg.html" rel="nofollow ugc"><img src="http://i194.photobucket.com/albums/z42/Toftylicious/EDC%20Keychain/StarDriver2002c_zpsbd6854db.jpg" alt="" class="img-markdown  img-fluid" /></a></p>
<p dir="auto"><a href="http://s194.photobucket.com/user/Toftylicious/media/EDC%20Keychain/StarDriver2003b_zps1e6b4a74.jpg.html" rel="nofollow ugc"><img src="http://i194.photobucket.com/albums/z42/Toftylicious/EDC%20Keychain/StarDriver2003b_zps1e6b4a74.jpg" alt="" class="img-markdown  img-fluid" /></a></p>
<p dir="auto"><a href="http://s194.photobucket.com/user/Toftylicious/media/EDC%20Keychain/StarDriver2006b_zpsff3490e7.jpg.html" rel="nofollow ugc"><img src="http://i194.photobucket.com/albums/z42/Toftylicious/EDC%20Keychain/StarDriver2006b_zpsff3490e7.jpg" alt="" class="img-markdown  img-fluid" /></a></p>
<p dir="auto">There's not too much to say about this one, it's exactly as the render shows in in the earlier post.</p>
<p dir="auto">Secondly: The Brewzi (or as i suggested the BrUZI)</p>
<p dir="auto"><a href="http://s194.photobucket.com/user/Toftylicious/media/EDC%20Keychain/BrUZI002b_zpsca68eac2.jpg.html" rel="nofollow ugc"><img src="http://i194.photobucket.com/albums/z42/Toftylicious/EDC%20Keychain/BrUZI002b_zpsca68eac2.jpg" alt="" class="img-markdown  img-fluid" /></a></p>
<p dir="auto">This was a commissioned piece and apparently it's for adjusting the front and rear sights on UZIs.<br />
The original brief was just for the sight adjuster and bottle opener but i added the 1/4" hex driver just to help stop it just being about "beer and guns". Also with the o-ring groove, the end looks a little bit like a thingy, hehe.</p>
<p dir="auto">Thirdly: Challenge Coins.</p>
<p dir="auto"><a href="http://s194.photobucket.com/user/Toftylicious/media/EDC%20Keychain/MTOCoins023b_zpsddac2734.jpg.html" rel="nofollow ugc"><img src="http://i194.photobucket.com/albums/z42/Toftylicious/EDC%20Keychain/MTOCoins023b_zpsddac2734.jpg" alt="" class="img-markdown  img-fluid" /></a></p>
<p dir="auto">The less said about these the better.</p>
<p dir="auto">Fourthly: T-Bar.</p>
<p dir="auto"><a href="http://s194.photobucket.com/user/Toftylicious/media/EDC%20Keychain/T-Bar013b_zpsc663785c.jpg.html" rel="nofollow ugc"><img src="http://i194.photobucket.com/albums/z42/Toftylicious/EDC%20Keychain/T-Bar013b_zpsc663785c.jpg" alt="" class="img-markdown  img-fluid" /></a></p>
<p dir="auto"><a href="http://s194.photobucket.com/user/Toftylicious/media/EDC%20Keychain/T-Bar011b_zps67eee520.jpg.html" rel="nofollow ugc"><img src="http://i194.photobucket.com/albums/z42/Toftylicious/EDC%20Keychain/T-Bar011b_zps67eee520.jpg" alt="" class="img-markdown  img-fluid" /></a></p>
<p dir="auto"><a href="http://s194.photobucket.com/user/Toftylicious/media/EDC%20Keychain/T-Bar012b_zpsd4bb3c2f.jpg.html" rel="nofollow ugc"><img src="http://i194.photobucket.com/albums/z42/Toftylicious/EDC%20Keychain/T-Bar012b_zpsd4bb3c2f.jpg" alt="" class="img-markdown  img-fluid" /></a></p>
<p dir="auto">This was another commissioned piece and i think it came out really well.<br />
The bit holder in the tip, unlike my original Tofty Prybar, has a hex profile so the bit can't fall out of the slot sideways, even without the o-rings.<br />
The tool is only 1/8" thick so it works out to be almost exactly the same price to print as my original prybar which is 5mm thick.</p>
<p dir="auto">And then The Long Bar.</p>
<p dir="auto"><a href="http://s194.photobucket.com/user/Toftylicious/media/EDC%20Keychain/Long-Bar002b_zps5917694a.jpg.html" rel="nofollow ugc"><img src="http://i194.photobucket.com/albums/z42/Toftylicious/EDC%20Keychain/Long-Bar002b_zps5917694a.jpg" alt="" class="img-markdown  img-fluid" /></a></p>
<p dir="auto"><a href="http://s194.photobucket.com/user/Toftylicious/media/EDC%20Keychain/Long-Bar004b_zps1aa50946.jpg.html" rel="nofollow ugc"><img src="http://i194.photobucket.com/albums/z42/Toftylicious/EDC%20Keychain/Long-Bar004b_zps1aa50946.jpg" alt="" class="img-markdown  img-fluid" /></a></p>
<p dir="auto">This tool is pretty much a rearranged T-Bar with some of the compromises, like the prying edge, sorted out in a high-torque enabling, chunky bar design.<br />
Also a fair few more hex sizes were added.</p>
<p dir="auto">Lastly: Pocket Clip Tool.</p>
<p dir="auto"><a href="http://s194.photobucket.com/user/Toftylicious/media/EDC%20Keychain/PocketClip001b_zpsd5482e23.jpg.html" rel="nofollow ugc"><img src="http://i194.photobucket.com/albums/z42/Toftylicious/EDC%20Keychain/PocketClip001b_zpsd5482e23.jpg" alt="" class="img-markdown  img-fluid" /></a></p>
<p dir="auto"><a href="http://s194.photobucket.com/user/Toftylicious/media/EDC%20Keychain/PocketClip002b_zps1ec78c98.jpg.html" rel="nofollow ugc"><img src="http://i194.photobucket.com/albums/z42/Toftylicious/EDC%20Keychain/PocketClip002b_zps1ec78c98.jpg" alt="" class="img-markdown  img-fluid" /></a></p>
<p dir="auto"><a href="http://s194.photobucket.com/user/Toftylicious/media/EDC%20Keychain/PocketClip003b_zps4c584913.jpg.html" rel="nofollow ugc"><img src="http://i194.photobucket.com/albums/z42/Toftylicious/EDC%20Keychain/PocketClip003b_zps4c584913.jpg" alt="" class="img-markdown  img-fluid" /></a></p>
<p dir="auto">This was yet another commission, designed to be laser-cut from sheet and then formed but the customer stopped communicating with me so i will be putting it up on Shapeways sometime soon.<br />
The model needs sprues that hold up the clip during printing that have to be cut off which is a bit of a shame.</p>
<p dir="auto">Right i think that's all of them explained.......or is it?</p>
]]></description><link>https://multitool.ninja/post/770963</link><guid isPermaLink="true">https://multitool.ninja/post/770963</guid><dc:creator><![CDATA[Tofty]]></dc:creator><pubDate>Wed, 04 Sep 2013 21:45:57 GMT</pubDate></item><item><title><![CDATA[Reply to MT.O Prybar on Tue, 03 Sep 2013 16:38:33 GMT]]></title><description><![CDATA[<p dir="auto"><img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/770578</link><guid isPermaLink="true">https://multitool.ninja/post/770578</guid><dc:creator><![CDATA[Gareth]]></dc:creator><pubDate>Tue, 03 Sep 2013 16:38:33 GMT</pubDate></item><item><title><![CDATA[Reply to MT.O Prybar on Mon, 02 Sep 2013 17:15:54 GMT]]></title><description><![CDATA[<p dir="auto"><img src="/assets/uploads/smileys/popcorn.gif" alt=":popcorn:" title="Popcorn" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/popcorn.gif" alt=":popcorn:" title="Popcorn" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/popcorn.gif" alt=":popcorn:" title="Popcorn" class="forum-smiley emoji" /></p>
<pre><code><img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" />
</code></pre>
]]></description><link>https://multitool.ninja/post/770241</link><guid isPermaLink="true">https://multitool.ninja/post/770241</guid><dc:creator><![CDATA[Sparky415]]></dc:creator><pubDate>Mon, 02 Sep 2013 17:15:54 GMT</pubDate></item></channel></rss>