<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0"><channel><title><![CDATA[84/91mm Combo Tool in Mods]]></title><description><![CDATA[<p dir="auto">I’m a longtime SAK user, more recently a collector, and even more recently become interested in modding.  So far my “modding “ has been limited to disassembly/cleaning/reassembly of various knives.  However, I am interested in doing actual mods and a recent thread caught my interest and led me to post here for the first time: <a href="/topic/40593">/topic/40593</a></p>
<p dir="auto">In this thread, the assertion (Reply #8) was made that if you want to use the combo tool in a 91mm mod and use all new parts, a Compact is required as the donor.  This solution, of course, is a relatively expensive proposition.  So, in the next reply, an important question was asked, but never answered (as far as I could see): Can’t the combo tool from the Bantam be used in a 91mm mod?</p>
<p dir="auto">My understanding is that the 91mm and 84mm combo tools are one and the same.  So the only limiting factor here should be any difference in shank configurations between the combo tool and small blade.  If the shanks are the same then the original 91mm backspring can be reused.</p>
<p dir="auto">So, is the combo tool a direct replacement for the small blade, are minor modifications to the backspring and/or tool shank necessary, or is the backspring from the Compact a necessity for this particular mod?</p>
<p dir="auto">The reason I ask this question is that SAK pliers are a favorite of mine.  I’m interested in creating a Special Mechanic/Mechanic Jr.</p>
]]></description><link>https://multitool.ninja/topic/40793/8491mm-combo-tool-in-mods</link><generator>RSS for Node</generator><lastBuildDate>Mon, 16 Nov 2026 12:04:58 GMT</lastBuildDate><atom:link href="https://multitool.ninja/topic/40793.rss" rel="self" type="application/rss+xml"/><pubDate>Sun, 11 Nov 2012 15:49:08 GMT</pubDate><ttl>60</ttl><item><title><![CDATA[Reply to 84/91mm Combo Tool in Mods on Mon, 19 Nov 2012 17:12:51 GMT]]></title><description><![CDATA[<p dir="auto">Both the Swiss steel is very hard and heats up fast if you don't over heat the bit it will keep cutting and not burn up or break. When the bit is about to go though you have to go even slower so the bit does not hang up and break. If you are careful you can get one hole with a new bit. The bits i buy come in two packs that way i have a back up.<br />
pc</p>
]]></description><link>https://multitool.ninja/post/653690</link><guid isPermaLink="true">https://multitool.ninja/post/653690</guid><dc:creator><![CDATA[Mike 56]]></dc:creator><pubDate>Mon, 19 Nov 2012 17:12:51 GMT</pubDate></item><item><title><![CDATA[Reply to 84/91mm Combo Tool in Mods on Sun, 18 Nov 2012 19:53:18 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/mike" aria-label="Profile: Mike">@<bdi>Mike</bdi></a> 56 <a href="/post/653239">said</a>:<br />
I have drilled quite a few 84mm combo tools. I use cheap 7/32 drill bits i buy at Walmart. Heat is the enemy i run my drill press as slow i can. When the bit gets starts to get hot i let it cool some drilling more. It is slow but it works. I tried using oil while drilling but then my bits did not cut very well. Using charcoal lighter fluid worked pretty good it helped keep the bit cool and it still cut well. Just go slow.</p>
</blockquote>
<p dir="auto">When you say "go slow" do you mean to use a slow rotational speed on the drill, or use a slow feed, or both?</p>
]]></description><link>https://multitool.ninja/post/653504</link><guid isPermaLink="true">https://multitool.ninja/post/653504</guid><dc:creator><![CDATA[WoodMan]]></dc:creator><pubDate>Sun, 18 Nov 2012 19:53:18 GMT</pubDate></item><item><title><![CDATA[Reply to 84/91mm Combo Tool in Mods on Sun, 18 Nov 2012 17:22:34 GMT]]></title><description><![CDATA[<p dir="auto">Yes you are right it is 7/64. 7/64 bits a little bigger than a 2.5 but they work fine. 7/64 bits are  easier to come by here in the US.<br />
Mike</p>
]]></description><link>https://multitool.ninja/post/653467</link><guid isPermaLink="true">https://multitool.ninja/post/653467</guid><dc:creator><![CDATA[Mike 56]]></dc:creator><pubDate>Sun, 18 Nov 2012 17:22:34 GMT</pubDate></item><item><title><![CDATA[Reply to 84/91mm Combo Tool in Mods on Sun, 18 Nov 2012 03:35:43 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/mike" aria-label="Profile: Mike">@<bdi>Mike</bdi></a> 56 <a href="/post/653239">said</a>:<br />
I have drilled quite a few 84mm combo tools. I use cheap 7/32 drill bits i buy at Walmart. Heat is the enemy i run my drill press as slow i can. When the bit gets starts to get hot i let it cool some drilling more. It is slow but it works. I tried using oil while drilling but then my bits did not cut very well. Using charcoal lighter fluid worked pretty good it helped keep the bit cool and it still cut well. Just go slow.</p>
</blockquote>
<p dir="auto">Do you mean 7/64"?  7/32" would be far too big.</p>
]]></description><link>https://multitool.ninja/post/653377</link><guid isPermaLink="true">https://multitool.ninja/post/653377</guid><dc:creator><![CDATA[WoodMan]]></dc:creator><pubDate>Sun, 18 Nov 2012 03:35:43 GMT</pubDate></item><item><title><![CDATA[Reply to 84/91mm Combo Tool in Mods on Sat, 17 Nov 2012 17:22:54 GMT]]></title><description><![CDATA[<p dir="auto">I have drilled quite a few 84mm combo tools. I use cheap 7/32 drill bits i buy at Walmart. Heat is the enemy i run my drill press as slow i can. When the bit gets starts to get hot i let it cool some drilling more. It is slow but it works. I tried using oil while drilling but then my bits did not cut very well. Using charcoal lighter fluid worked pretty good it helped keep the bit cool and it still cut well. Just go slow.</p>
]]></description><link>https://multitool.ninja/post/653239</link><guid isPermaLink="true">https://multitool.ninja/post/653239</guid><dc:creator><![CDATA[Mike 56]]></dc:creator><pubDate>Sat, 17 Nov 2012 17:22:54 GMT</pubDate></item><item><title><![CDATA[Reply to 84/91mm Combo Tool in Mods on Wed, 14 Nov 2012 01:13:55 GMT]]></title><description><![CDATA[<p dir="auto">You'll need to polish the inside of the hole, and its tiny.  I just tightly roll up a small piece of sandpaper and use it in a cordless drill to sand. It seems an odd solution, but it really works well.</p>
]]></description><link>https://multitool.ninja/post/652613</link><guid isPermaLink="true">https://multitool.ninja/post/652613</guid><dc:creator><![CDATA[Syph007]]></dc:creator><pubDate>Wed, 14 Nov 2012 01:13:55 GMT</pubDate></item><item><title><![CDATA[Reply to 84/91mm Combo Tool in Mods on Wed, 14 Nov 2012 01:05:36 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/syph007" aria-label="Profile: Syph007">@<bdi>Syph007</bdi></a> <a href="/post/652606">said</a>:<br />
Those cheap bits are fine for a couple dozen holes at least.   I find end mills to be pretty bad drill bits when used in a drill press, but they would be fine in a mill.  A drill is a poor mans mill, and if you dont use a drill bit the hole wont self center.  Might not be noticable, but in things that I do like drilling out scales and springs a milling bit would be bad, its important to have the hole exactly on center and a drill bit will do that on its own.</p>
<p dir="auto">Oh and cutting oil is a must.  :D</p>
</blockquote>
<p dir="auto">I was planning to first chuck up a regular 2.2mm (that is the hole size on an 84mm combo tool, isn't it?) drill bit and use that to accurately locate/clamp-up the part.  Then remove the regular drill bit, install the larger 2.5mm bit or end mill, and drill.  Hopefully, that technique will get me exactly on center.</p>
<p dir="auto">In any case, I'm going to try the bits you recommended, first.</p>
]]></description><link>https://multitool.ninja/post/652612</link><guid isPermaLink="true">https://multitool.ninja/post/652612</guid><dc:creator><![CDATA[WoodMan]]></dc:creator><pubDate>Wed, 14 Nov 2012 01:05:36 GMT</pubDate></item><item><title><![CDATA[Reply to 84/91mm Combo Tool in Mods on Wed, 14 Nov 2012 00:49:23 GMT]]></title><description><![CDATA[<p dir="auto">Those cheap bits are fine for a couple dozen holes at least.   I find end mills to be pretty bad drill bits when used in a drill press, but they would be fine in a mill.  A drill is a poor mans mill, and if you dont use a drill bit the hole wont self center.  Might not be noticable, but in things that I do like drilling out scales and springs a milling bit would be bad, its important to have the hole exactly on center and a drill bit will do that on its own.</p>
<p dir="auto">Oh and cutting oil is a must.  :D</p>
]]></description><link>https://multitool.ninja/post/652606</link><guid isPermaLink="true">https://multitool.ninja/post/652606</guid><dc:creator><![CDATA[Syph007]]></dc:creator><pubDate>Wed, 14 Nov 2012 00:49:23 GMT</pubDate></item><item><title><![CDATA[Reply to 84/91mm Combo Tool in Mods on Wed, 14 Nov 2012 00:42:59 GMT]]></title><description><![CDATA[<p dir="auto">Thanks for all the advice.</p>
<p dir="auto">Ordered a 2.5mm end mill off ebay and the 2.5mm solid carbide drill bits that Syph007 recommended.</p>
]]></description><link>https://multitool.ninja/post/652605</link><guid isPermaLink="true">https://multitool.ninja/post/652605</guid><dc:creator><![CDATA[WoodMan]]></dc:creator><pubDate>Wed, 14 Nov 2012 00:42:59 GMT</pubDate></item><item><title><![CDATA[Reply to 84/91mm Combo Tool in Mods on Tue, 13 Nov 2012 02:20:58 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/woodman" aria-label="Profile: WoodMan">@<bdi>WoodMan</bdi></a> <a href="/post/652353">said</a>:<br />
When you say low speed, what ballpark RPMs are you talking about. I was planning to use about 1200 rpm.</p>
<p dir="auto">And what type of carbide dremel bit.  I'm guessing this is not a Dremel brand bit.</p>
</blockquote>
<p dir="auto">the chart I'm looking at says 50sf/m so...  (for example) 1/8 drill = approx 0.4 inch circumference or 30 revs per foot. 30 x 50 = 1500rpm.</p>
<p dir="auto">No idea what brand my carbide bits are, I was "gifted" them when I did a home job for the tool storeman at a previous employer.  <img src="/assets/uploads/smileys/whistle.gif" alt=":whistle:" title="Whistle" class="forum-smiley emoji" /><br />
They are 1/8" and I have Ball, Straight (round end), Straight (square end) and Tapered, with 3 or 4 of each.</p>
]]></description><link>https://multitool.ninja/post/652390</link><guid isPermaLink="true">https://multitool.ninja/post/652390</guid><dc:creator><![CDATA[PTRSAK]]></dc:creator><pubDate>Tue, 13 Nov 2012 02:20:58 GMT</pubDate></item><item><title><![CDATA[Reply to 84/91mm Combo Tool in Mods on Tue, 13 Nov 2012 01:31:10 GMT]]></title><description><![CDATA[<p dir="auto">If you have a drill press use either 2 flute or 4 flute carbide end mills. I use 2.5 and 3.0mm sizes. They can be bought on evilbay for about $7. I have 6 and only broke one so far( my fault). Get carbide with titanium nitride coating, that's what's recommended for hardened stainless steel.</p>
]]></description><link>https://multitool.ninja/post/652382</link><guid isPermaLink="true">https://multitool.ninja/post/652382</guid><dc:creator><![CDATA[tattoosteve99]]></dc:creator><pubDate>Tue, 13 Nov 2012 01:31:10 GMT</pubDate></item><item><title><![CDATA[Reply to 84/91mm Combo Tool in Mods on Tue, 13 Nov 2012 01:22:54 GMT]]></title><description><![CDATA[<p dir="auto"><a href="/topic/36983">/topic/36983</a></p>
<p dir="auto">i found this thread with Syph007 says to just go with peening with cellidor since it's covered up anyways.  a lot more work to drill everything out.</p>
<p dir="auto">good luck</p>
]]></description><link>https://multitool.ninja/post/652378</link><guid isPermaLink="true">https://multitool.ninja/post/652378</guid><dc:creator><![CDATA[WiSAKfan]]></dc:creator><pubDate>Tue, 13 Nov 2012 01:22:54 GMT</pubDate></item><item><title><![CDATA[Reply to 84/91mm Combo Tool in Mods on Tue, 13 Nov 2012 00:28:00 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/wisakfan" aria-label="Profile: WiSAKfan">@<bdi>WiSAKfan</bdi></a> <a href="/post/652368">said</a>:<br />
he's using pivots instead of pins.  it's not really anything to do with alox or cellidor, i may be wrong but i think one could use pivots for either  EDIT provided you can drill out backside tools enough to use a pivot there</p>
</blockquote>
<p dir="auto">Wouldn't there be a problem with the pivot screws bearing on the cellidor instead of alox?</p>
<p dir="auto">I'm interested in this idea.  Can someone who has modded a cellidor knife with pivots instead of brass rods post on this concept?</p>
]]></description><link>https://multitool.ninja/post/652373</link><guid isPermaLink="true">https://multitool.ninja/post/652373</guid><dc:creator><![CDATA[WoodMan]]></dc:creator><pubDate>Tue, 13 Nov 2012 00:28:00 GMT</pubDate></item><item><title><![CDATA[Reply to 84/91mm Combo Tool in Mods on Mon, 12 Nov 2012 23:32:36 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/syph007" aria-label="Profile: Syph007">@<bdi>Syph007</bdi></a> <a href="/post/1">said</a>:</p>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/woodman" aria-label="Profile: WoodMan">@<bdi>WoodMan</bdi></a> <a href="/post/652357">said</a>:</p>
<blockquote></blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/syph007" aria-label="Profile: Syph007">@<bdi>Syph007</bdi></a> <a href="/post/652352">said</a>:</p>
<blockquote>
<blockquote>
<p dir="auto">Lately Ive been getting super cheap carbide bits from this place.  They dont last as long but are about 1/4 the cost so overall they work good enough.  I can get 30 holes from one bit if im careful.</p>
<p dir="auto"><a href="http://drillbitsunlimited.com/New-Drill-Bits-C291007.aspx?sid=25472" rel="nofollow ugc">http://drillbitsunlimited.com/New-Drill-Bits-C291007.aspx?sid=25472</a></p>
<p dir="auto">Shipping to canada was cheap, might be worth checking what shipping to your country is.</p>
</blockquote>
<p dir="auto">Forgive me if I'm missing something at the <a href="http://drillbitsunlimited.com" rel="nofollow ugc">drillbitsunlimited.com</a> site, but the closest bit I see is .096"/2.45mm.  That's about .0025" under the stated 2.5mm brass rod.  If that size works, I'm all for it because those bits are relatively cheap.</p>
<p dir="auto">These are the ones I was looking at:<br />
<a href="http://www.use-enco.com/CGI/INPDFF?PMPAGE=44&amp;PARTPG=INLMK32" rel="nofollow ugc">http://www.use-enco.com/CGI/INPDFF?PMPAGE=44&amp;PARTPG=INLMK32</a></p>
</blockquote>
<p dir="auto">I buy 0.125 size, but they do have 2.50 mm</p>
<p dir="auto"><a href="http://drillbitsunlimited.com/098-250mm-NEW-Solid-Carbide-Drill-Bit--P2388152.aspx" rel="nofollow ugc">http://drillbitsunlimited.com/098-250mm-NEW-Solid-Carbide-Drill-Bit--P2388152.aspx</a></p>
<p dir="auto">They arent the highest quality, but they work.  I get more holes from a 14 dollar spade bit, but if I figure it out as cost per hole drilled I think these are slightly better.  Much better if you only need to drill a few holes.</p>
</blockquote>
<p dir="auto">Thanks for that link. <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /> Bookmarked.</p>
]]></description><link>https://multitool.ninja/post/652369</link><guid isPermaLink="true">https://multitool.ninja/post/652369</guid><dc:creator><![CDATA[enki_ck]]></dc:creator><pubDate>Mon, 12 Nov 2012 23:32:36 GMT</pubDate></item><item><title><![CDATA[Reply to 84/91mm Combo Tool in Mods on Mon, 12 Nov 2012 23:26:10 GMT]]></title><description><![CDATA[<p dir="auto">he's using pivots instead of pins.  it's not really anything to do with alox or cellidor, i may be wrong but i think one could use pivots for either  EDIT provided you can drill out backside tools enough to use a pivot there</p>
<p dir="auto">just a quick pic i found of his to show:</p>
<p dir="auto"><img src="http://i1117.photobucket.com/albums/k587/Syph007/Super%20Cadet/IMG_3056.jpg" alt="" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/652368</link><guid isPermaLink="true">https://multitool.ninja/post/652368</guid><dc:creator><![CDATA[WiSAKfan]]></dc:creator><pubDate>Mon, 12 Nov 2012 23:26:10 GMT</pubDate></item><item><title><![CDATA[Reply to 84/91mm Combo Tool in Mods on Mon, 12 Nov 2012 23:18:58 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/wisakfan" aria-label="Profile: WiSAKfan">@<bdi>WiSAKfan</bdi></a> <a href="/post/652364">said</a>:<br />
i use 3/32 which is common here in the states.</p>
<p dir="auto">the pivots syph007 uses are larger then the pin stock.</p>
</blockquote>
<p dir="auto">Ah, because he's modding alox, not cellidor, knives?</p>
]]></description><link>https://multitool.ninja/post/652367</link><guid isPermaLink="true">https://multitool.ninja/post/652367</guid><dc:creator><![CDATA[WoodMan]]></dc:creator><pubDate>Mon, 12 Nov 2012 23:18:58 GMT</pubDate></item><item><title><![CDATA[Reply to 84/91mm Combo Tool in Mods on Mon, 12 Nov 2012 23:09:17 GMT]]></title><description><![CDATA[<p dir="auto">i use 3/32 which is common here in the states.</p>
<p dir="auto">the pivots syph007 uses are larger then the pin stock.</p>
]]></description><link>https://multitool.ninja/post/652364</link><guid isPermaLink="true">https://multitool.ninja/post/652364</guid><dc:creator><![CDATA[WiSAKfan]]></dc:creator><pubDate>Mon, 12 Nov 2012 23:09:17 GMT</pubDate></item><item><title><![CDATA[Reply to 84/91mm Combo Tool in Mods on Mon, 12 Nov 2012 23:07:22 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/woodman" aria-label="Profile: WoodMan">@<bdi>WoodMan</bdi></a> <a href="/post/652361">said</a>:</p>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/syph007" aria-label="Profile: Syph007">@<bdi>Syph007</bdi></a> <a href="/post/652358">said</a>:</p>
<blockquote></blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/woodman" aria-label="Profile: WoodMan">@<bdi>WoodMan</bdi></a> <a href="/post/652357">said</a>:</p>
<blockquote>
<blockquote></blockquote>
</blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/syph007" aria-label="Profile: Syph007">@<bdi>Syph007</bdi></a> <a href="/post/652352">said</a>:</p>
<blockquote>
<blockquote>
<blockquote>
<p dir="auto">Lately Ive been getting super cheap carbide bits from this place.  They dont last as long but are about 1/4 the cost so overall they work good enough.  I can get 30 holes from one bit if im careful.</p>
<p dir="auto"><a href="http://drillbitsunlimited.com/New-Drill-Bits-C291007.aspx?sid=25472" rel="nofollow ugc">http://drillbitsunlimited.com/New-Drill-Bits-C291007.aspx?sid=25472</a></p>
<p dir="auto">Shipping to canada was cheap, might be worth checking what shipping to your country is.</p>
</blockquote>
<p dir="auto">Forgive me if I'm missing something at the <a href="http://drillbitsunlimited.com" rel="nofollow ugc">drillbitsunlimited.com</a> site, but the closest bit I see is .096&quot;/2.45mm.  That's about .0025&quot; under the stated 2.5mm brass rod.  If that size works, I'm all for it because those bits are relatively cheap.</p>
<p dir="auto">These are the ones I was looking at:<br />
<a href="http://www.use-enco.com/CGI/INPDFF?PMPAGE=44&amp;PARTPG=INLMK32" rel="nofollow ugc">http://www.use-enco.com/CGI/INPDFF?PMPAGE=44&amp;PARTPG=INLMK32</a></p>
</blockquote>
<p dir="auto">I buy 0.125 size, but they do have 2.50 mm</p>
<p dir="auto"><a href="http://drillbitsunlimited.com/098-250mm-NEW-Solid-Carbide-Drill-Bit--P2388152.aspx" rel="nofollow ugc">http://drillbitsunlimited.com/098-250mm-NEW-Solid-Carbide-Drill-Bit--P2388152.aspx</a></p>
<p dir="auto">They arent the highest quality, but they work.  I get more holes from a 14 dollar spade bit, but if I figure it out as cost per hole drilled I think these are slightly better.  Much better if you only need to drill a few holes.</p>
</blockquote>
<p dir="auto">Isn't .125&quot; way too big?  I would think a bit that much oversized would result in a lot of play in the tool.</p>
<p dir="auto">On a related note, what speed do you run the drill press at with the carbide bit?</p>
</blockquote>
<p dir="auto">I use 1/8 pivots so I drill out everything to 0.125.</p>
<p dir="auto">On my drill press I have the belt on the middle of the pulley stack, sorry I dont know what speed that is.</p>
]]></description><link>https://multitool.ninja/post/652362</link><guid isPermaLink="true">https://multitool.ninja/post/652362</guid><dc:creator><![CDATA[Syph007]]></dc:creator><pubDate>Mon, 12 Nov 2012 23:07:22 GMT</pubDate></item><item><title><![CDATA[Reply to 84/91mm Combo Tool in Mods on Mon, 12 Nov 2012 23:04:14 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/syph007" aria-label="Profile: Syph007">@<bdi>Syph007</bdi></a> <a href="/post/652358">said</a>:</p>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/woodman" aria-label="Profile: WoodMan">@<bdi>WoodMan</bdi></a> <a href="/post/652357">said</a>:</p>
<blockquote></blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/syph007" aria-label="Profile: Syph007">@<bdi>Syph007</bdi></a> <a href="/post/652352">said</a>:</p>
<blockquote>
<blockquote>
<p dir="auto">Lately Ive been getting super cheap carbide bits from this place.  They dont last as long but are about 1/4 the cost so overall they work good enough.  I can get 30 holes from one bit if im careful.</p>
<p dir="auto"><a href="http://drillbitsunlimited.com/New-Drill-Bits-C291007.aspx?sid=25472" rel="nofollow ugc">http://drillbitsunlimited.com/New-Drill-Bits-C291007.aspx?sid=25472</a></p>
<p dir="auto">Shipping to canada was cheap, might be worth checking what shipping to your country is.</p>
</blockquote>
<p dir="auto">Forgive me if I'm missing something at the <a href="http://drillbitsunlimited.com" rel="nofollow ugc">drillbitsunlimited.com</a> site, but the closest bit I see is .096&quot;/2.45mm.  That's about .0025&quot; under the stated 2.5mm brass rod.  If that size works, I'm all for it because those bits are relatively cheap.</p>
<p dir="auto">These are the ones I was looking at:<br />
<a href="http://www.use-enco.com/CGI/INPDFF?PMPAGE=44&amp;PARTPG=INLMK32" rel="nofollow ugc">http://www.use-enco.com/CGI/INPDFF?PMPAGE=44&amp;PARTPG=INLMK32</a></p>
</blockquote>
<p dir="auto">I buy 0.125 size, but they do have 2.50 mm</p>
<p dir="auto"><a href="http://drillbitsunlimited.com/098-250mm-NEW-Solid-Carbide-Drill-Bit--P2388152.aspx" rel="nofollow ugc">http://drillbitsunlimited.com/098-250mm-NEW-Solid-Carbide-Drill-Bit--P2388152.aspx</a></p>
<p dir="auto">They arent the highest quality, but they work.  I get more holes from a 14 dollar spade bit, but if I figure it out as cost per hole drilled I think these are slightly better.  Much better if you only need to drill a few holes.</p>
</blockquote>
<p dir="auto">Isn't .125&quot; way too big?  I would think a bit that much oversized would result in a lot of play in the tool.</p>
<p dir="auto">On a related note, what speed do you run the drill press at with the carbide bit?</p>
]]></description><link>https://multitool.ninja/post/652361</link><guid isPermaLink="true">https://multitool.ninja/post/652361</guid><dc:creator><![CDATA[WoodMan]]></dc:creator><pubDate>Mon, 12 Nov 2012 23:04:14 GMT</pubDate></item><item><title><![CDATA[Reply to 84/91mm Combo Tool in Mods on Mon, 12 Nov 2012 22:55:58 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/wisakfan" aria-label="Profile: WiSAKfan">@<bdi>WiSAKfan</bdi></a> <a href="/post/652356">said</a>:<br />
the one i have is a dremel brand carbide</p>
<p dir="auto">looks like this, it's not for drilling but you are grinding the sides</p>
<p dir="auto"><img src="http://www.plumbersurplus.com/images/prod/5/Dremel-9910-rw-95689-161574.jpg" alt="" class="img-markdown  img-fluid" /></p>
</blockquote>
<p dir="auto">Found it, thanks:<br />
<a href="http://www.dremel.com/en-us/Accessories/Pages/ProductDetail.aspx?pid=9910" rel="nofollow ugc">http://www.dremel.com/en-us/Accessories/Pages/ProductDetail.aspx?pid=9910</a></p>
]]></description><link>https://multitool.ninja/post/652359</link><guid isPermaLink="true">https://multitool.ninja/post/652359</guid><dc:creator><![CDATA[WoodMan]]></dc:creator><pubDate>Mon, 12 Nov 2012 22:55:58 GMT</pubDate></item><item><title><![CDATA[Reply to 84/91mm Combo Tool in Mods on Mon, 12 Nov 2012 22:55:41 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/woodman" aria-label="Profile: WoodMan">@<bdi>WoodMan</bdi></a> <a href="/post/652357">said</a>:</p>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/syph007" aria-label="Profile: Syph007">@<bdi>Syph007</bdi></a> <a href="/post/652352">said</a>:</p>
<blockquote>
<p dir="auto">Lately Ive been getting super cheap carbide bits from this place.  They dont last as long but are about 1/4 the cost so overall they work good enough.  I can get 30 holes from one bit if im careful.</p>
<p dir="auto"><a href="http://drillbitsunlimited.com/New-Drill-Bits-C291007.aspx?sid=25472" rel="nofollow ugc">http://drillbitsunlimited.com/New-Drill-Bits-C291007.aspx?sid=25472</a></p>
<p dir="auto">Shipping to canada was cheap, might be worth checking what shipping to your country is.</p>
</blockquote>
<p dir="auto">Forgive me if I'm missing something at the <a href="http://drillbitsunlimited.com" rel="nofollow ugc">drillbitsunlimited.com</a> site, but the closest bit I see is .096&quot;/2.45mm.  That's about .0025&quot; under the stated 2.5mm brass rod.  If that size works, I'm all for it because those bits are relatively cheap.</p>
<p dir="auto">These are the ones I was looking at:<br />
<a href="http://www.use-enco.com/CGI/INPDFF?PMPAGE=44&amp;PARTPG=INLMK32" rel="nofollow ugc">http://www.use-enco.com/CGI/INPDFF?PMPAGE=44&amp;PARTPG=INLMK32</a></p>
</blockquote>
<p dir="auto">I buy 0.125 size, but they do have 2.50 mm</p>
<p dir="auto"><a href="http://drillbitsunlimited.com/098-250mm-NEW-Solid-Carbide-Drill-Bit--P2388152.aspx" rel="nofollow ugc">http://drillbitsunlimited.com/098-250mm-NEW-Solid-Carbide-Drill-Bit--P2388152.aspx</a></p>
<p dir="auto">They arent the highest quality, but they work.  I get more holes from a 14 dollar spade bit, but if I figure it out as cost per hole drilled I think these are slightly better.  Much better if you only need to drill a few holes.</p>
]]></description><link>https://multitool.ninja/post/652358</link><guid isPermaLink="true">https://multitool.ninja/post/652358</guid><dc:creator><![CDATA[Syph007]]></dc:creator><pubDate>Mon, 12 Nov 2012 22:55:41 GMT</pubDate></item><item><title><![CDATA[Reply to 84/91mm Combo Tool in Mods on Mon, 12 Nov 2012 22:50:22 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/syph007" aria-label="Profile: Syph007">@<bdi>Syph007</bdi></a> <a href="/post/652352">said</a>:<br />
Lately Ive been getting super cheap carbide bits from this place.  They dont last as long but are about 1/4 the cost so overall they work good enough.  I can get 30 holes from one bit if im careful.</p>
<p dir="auto"><a href="http://drillbitsunlimited.com/New-Drill-Bits-C291007.aspx?sid=25472" rel="nofollow ugc">http://drillbitsunlimited.com/New-Drill-Bits-C291007.aspx?sid=25472</a></p>
<p dir="auto">Shipping to canada was cheap, might be worth checking what shipping to your country is.</p>
</blockquote>
<p dir="auto">Forgive me if I'm missing something at the <a href="http://drillbitsunlimited.com" rel="nofollow ugc">drillbitsunlimited.com</a> site, but the closest bit I see is .096&quot;/2.45mm.  That's about .0025&quot; under the stated 2.5mm brass rod.  If that size works, I'm all for it because those bits are relatively cheap.</p>
<p dir="auto">These are the ones I was looking at:<br />
<a href="http://www.use-enco.com/CGI/INPDFF?PMPAGE=44&amp;PARTPG=INLMK32" rel="nofollow ugc">http://www.use-enco.com/CGI/INPDFF?PMPAGE=44&amp;PARTPG=INLMK32</a></p>
]]></description><link>https://multitool.ninja/post/652357</link><guid isPermaLink="true">https://multitool.ninja/post/652357</guid><dc:creator><![CDATA[WoodMan]]></dc:creator><pubDate>Mon, 12 Nov 2012 22:50:22 GMT</pubDate></item><item><title><![CDATA[Reply to 84/91mm Combo Tool in Mods on Mon, 12 Nov 2012 22:49:05 GMT]]></title><description><![CDATA[<p dir="auto">the one i have is a dremel brand carbide</p>
<p dir="auto">looks like this, it's not for drilling but you are grinding the sides</p>
<p dir="auto"><img src="http://www.plumbersurplus.com/images/prod/5/Dremel-9910-rw-95689-161574.jpg" alt="" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/652356</link><guid isPermaLink="true">https://multitool.ninja/post/652356</guid><dc:creator><![CDATA[WiSAKfan]]></dc:creator><pubDate>Mon, 12 Nov 2012 22:49:05 GMT</pubDate></item><item><title><![CDATA[Reply to 84/91mm Combo Tool in Mods on Mon, 12 Nov 2012 22:40:23 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/ptrsak" aria-label="Profile: PTRSAK">@<bdi>PTRSAK</bdi></a> <a href="/post/652315">said</a>:<br />
You can use cobalt drills, BUT you have to do it right... Low speed, (relatively) High feed and coolant/lubricant.<br />
You have to use a sharp drill and keep it cutting. If you don't lean on it enough it will burnish the cutting edge off and you bow have a blunt cobalt drill that is a bitch to sharpen because of the thick web.<br />
If you lean on it too hard.... PING. You have a broken drill.</p>
<p dir="auto">With the number of cobalt drills you are likely to go through it's probably cheaper to buy carbide if you plan to do this even on a slightly regular basis.</p>
<p dir="auto">I tend to use a carbide bit in my dremel and then finish the hole with a round diamond needle file.</p>
</blockquote>
<p dir="auto">When you say low speed, what ballpark RPMs are you talking about. I was planning to use about 1200 rpm.</p>
<p dir="auto">And what type of carbide dremel bit.  I'm guessing this is not a Dremel brand bit.</p>
]]></description><link>https://multitool.ninja/post/652353</link><guid isPermaLink="true">https://multitool.ninja/post/652353</guid><dc:creator><![CDATA[WoodMan]]></dc:creator><pubDate>Mon, 12 Nov 2012 22:40:23 GMT</pubDate></item></channel></rss>