<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0"><channel><title><![CDATA[I did it!!!]]></title><description><![CDATA[<p dir="auto">Okay, so Robert and Bryan have been pestering me about finishing my Yeoman...</p>
<p dir="auto">Well, here it is... <em>almost</em> finished!<br />
<img src="http://i763.photobucket.com/albums/xx271/hdoofenshmirtz/Forum%20Posts/IMG_0767.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">It was definitely a challenge, but not as hard as I expected!   <img src="/assets/uploads/smileys/angel.gif" alt=":angel:" title="angel" class="forum-smiley emoji" /></p>
<p dir="auto">I still need to do a little more work on it.  There is just a little bit of wiggle in the main blade, so I think I need to peen the pins on that end down a little more.  I'm going to put a C clamp on it to press it all tightly together when I attempt to do the additional peening.</p>
<p dir="auto">Don't have a pair of plus scales for it yet, but I may have a regular set somewhere.  I don't want to cannibalize the ones off of my Compact, so I'm going to have to get some somewhere.</p>
<p dir="auto">All of the tools have good snap, and everything seems to work pretty well.  The combo tool and blade sometimes hang up on each other when I close them, but I think that's because of the little bit of play in the pin on the blade end.  Hopefully a few taps with the hammer will fix it.  I'll let you guys know soon.</p>
]]></description><link>https://multitool.ninja/topic/41024/i-did-it</link><generator>RSS for Node</generator><lastBuildDate>Wed, 18 Nov 2026 21:46:20 GMT</lastBuildDate><atom:link href="https://multitool.ninja/topic/41024.rss" rel="self" type="application/rss+xml"/><pubDate>Sun, 25 Nov 2012 22:46:11 GMT</pubDate><ttl>60</ttl><item><title><![CDATA[Reply to I did it!!! on Wed, 05 Dec 2012 00:14:29 GMT]]></title><description><![CDATA[<p dir="auto">the pin stock on the 58mm is 1/16" which is much easier to find.  give your local hardware and hobby store a call and see if you can just grab locally</p>
]]></description><link>https://multitool.ninja/post/657545</link><guid isPermaLink="true">https://multitool.ninja/post/657545</guid><dc:creator><![CDATA[WiSAKfan]]></dc:creator><pubDate>Wed, 05 Dec 2012 00:14:29 GMT</pubDate></item><item><title><![CDATA[Reply to I did it!!! on Tue, 04 Dec 2012 22:48:32 GMT]]></title><description><![CDATA[<p dir="auto">Any 58mm pin stock you could get rid of? I might have talked Heinz into doing a 58mm mod for me.   ;)    <img src="/assets/uploads/smileys/poke2.gif" alt=":pok:" title="pok" class="forum-smiley emoji" /></p>
<p dir="auto">I can send you a Money Order if needed.</p>
]]></description><link>https://multitool.ninja/post/657525</link><guid isPermaLink="true">https://multitool.ninja/post/657525</guid><dc:creator><![CDATA[captain spaulding]]></dc:creator><pubDate>Tue, 04 Dec 2012 22:48:32 GMT</pubDate></item><item><title><![CDATA[Reply to I did it!!! on Tue, 04 Dec 2012 09:29:20 GMT]]></title><description><![CDATA[<p dir="auto">Would a shipment to germany be possible, too? ;)</p>
]]></description><link>https://multitool.ninja/post/657351</link><guid isPermaLink="true">https://multitool.ninja/post/657351</guid><dc:creator><![CDATA[HankSolon]]></dc:creator><pubDate>Tue, 04 Dec 2012 09:29:20 GMT</pubDate></item><item><title><![CDATA[Reply to I did it!!! on Tue, 04 Dec 2012 03:46:26 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/tattoosteve99" aria-label="Profile: tattoosteve99">@<bdi>tattoosteve99</bdi></a> <a href="/post/657274">said</a>:<br />
How many bushings you need? I have a ton I'll send you for nothing but a stamp :)</p>
</blockquote>
<p dir="auto">Thanks Steve!  PM incoming.</p>
]]></description><link>https://multitool.ninja/post/657332</link><guid isPermaLink="true">https://multitool.ninja/post/657332</guid><dc:creator><![CDATA[Heinz Doofenshmirtz]]></dc:creator><pubDate>Tue, 04 Dec 2012 03:46:26 GMT</pubDate></item><item><title><![CDATA[Reply to I did it!!! on Tue, 04 Dec 2012 01:19:37 GMT]]></title><description><![CDATA[<p dir="auto">How many bushings you need? I have a ton I'll send you for nothing but a stamp :)</p>
]]></description><link>https://multitool.ninja/post/657274</link><guid isPermaLink="true">https://multitool.ninja/post/657274</guid><dc:creator><![CDATA[tattoosteve99]]></dc:creator><pubDate>Tue, 04 Dec 2012 01:19:37 GMT</pubDate></item><item><title><![CDATA[Reply to I did it!!! on Tue, 04 Dec 2012 00:06:10 GMT]]></title><description><![CDATA[<p dir="auto">if you could rig up a mount that would hold pieces of the rod vertically i could see doing it.</p>
<p dir="auto">it would be harder if you cut it to thickness first  <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/657258</link><guid isPermaLink="true">https://multitool.ninja/post/657258</guid><dc:creator><![CDATA[WiSAKfan]]></dc:creator><pubDate>Tue, 04 Dec 2012 00:06:10 GMT</pubDate></item><item><title><![CDATA[Reply to I did it!!! on Mon, 03 Dec 2012 18:20:50 GMT]]></title><description><![CDATA[<p dir="auto">The little lip or ridge on the collar would be a pain to put on the brass rod. That's what holds the scale on.</p>
]]></description><link>https://multitool.ninja/post/657181</link><guid isPermaLink="true">https://multitool.ninja/post/657181</guid><dc:creator><![CDATA[GigaHz]]></dc:creator><pubDate>Mon, 03 Dec 2012 18:20:50 GMT</pubDate></item><item><title><![CDATA[Reply to I did it!!! on Mon, 03 Dec 2012 17:56:56 GMT]]></title><description><![CDATA[<p dir="auto">Once I can get some plus scales and possibly some more bushings, I'll fix mine.</p>
<p dir="auto">I'm thinking now that I'm probably just going to redo it altogether.  Use the old scissors that were in my old Explorer as well as the old blade.</p>
<p dir="auto">I was thinking it might be possible to make bushing out of brass rod, by finding some with the same outer diameter as the bushings, and then drilling a 2.5 mm diameter whole in the center.  Might be a little tricky, but with the right equipment I don't see why it couldn't be done.</p>
]]></description><link>https://multitool.ninja/post/657175</link><guid isPermaLink="true">https://multitool.ninja/post/657175</guid><dc:creator><![CDATA[Heinz Doofenshmirtz]]></dc:creator><pubDate>Mon, 03 Dec 2012 17:56:56 GMT</pubDate></item><item><title><![CDATA[Reply to I did it!!! on Mon, 03 Dec 2012 06:06:07 GMT]]></title><description><![CDATA[<p dir="auto">I did it too..  thanks for the kick in the pants to get this finished Heinz.</p>
<p dir="auto"><img src="http://i1309.photobucket.com/albums/s640/Peter_Thorpe/20121203_134035_zps3ccd4de8.jpg" alt="" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/657096</link><guid isPermaLink="true">https://multitool.ninja/post/657096</guid><dc:creator><![CDATA[PTRSAK]]></dc:creator><pubDate>Mon, 03 Dec 2012 06:06:07 GMT</pubDate></item><item><title><![CDATA[Reply to I did it!!! on Sun, 02 Dec 2012 17:19:14 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/syph007" aria-label="Profile: Syph007">@<bdi>Syph007</bdi></a> <a href="/post/656895">said</a>:</p>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/wisakfan" aria-label="Profile: WiSAKfan">@<bdi>WiSAKfan</bdi></a> <a href="/post/656891">said</a>:</p>
<blockquote>
<p dir="auto">regarding the missing bushings,</p>
<p dir="auto">what would happen if you peened the pins like you would on an alox for the missing bushings and then glued on cellidor?</p>
<p dir="auto">do the bushings serve another function besides being the spot where the cellidor scales anchor too?</p>
</blockquote>
<p dir="auto">Ya in a pinch you could just probably use a small nut or something and glue it to the scale.  If you peened without something the rivet would dome and glue wouldnt stick too well to that I would think.. but a small nut i bet would work.</p>
</blockquote>
<p dir="auto">great quick response from a fella that would certainly know!</p>
]]></description><link>https://multitool.ninja/post/656897</link><guid isPermaLink="true">https://multitool.ninja/post/656897</guid><dc:creator><![CDATA[WiSAKfan]]></dc:creator><pubDate>Sun, 02 Dec 2012 17:19:14 GMT</pubDate></item><item><title><![CDATA[Reply to I did it!!! on Sun, 02 Dec 2012 17:13:55 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/wisakfan" aria-label="Profile: WiSAKfan">@<bdi>WiSAKfan</bdi></a> <a href="/post/656891">said</a>:<br />
regarding the missing bushings,</p>
<p dir="auto">what would happen if you peened the pins like you would on an alox for the missing bushings and then glued on cellidor?</p>
<p dir="auto">do the bushings serve another function besides being the spot where the cellidor scales anchor too?</p>
</blockquote>
<p dir="auto">Ya in a pinch you could just probably use a small nut or something and glue it to the scale.  If you peened without something the rivet would dome and glue wouldnt stick too well to that I would think.. but a small nut i bet would work.</p>
]]></description><link>https://multitool.ninja/post/656895</link><guid isPermaLink="true">https://multitool.ninja/post/656895</guid><dc:creator><![CDATA[Syph007]]></dc:creator><pubDate>Sun, 02 Dec 2012 17:13:55 GMT</pubDate></item><item><title><![CDATA[Reply to I did it!!! on Sun, 02 Dec 2012 16:58:00 GMT]]></title><description><![CDATA[<p dir="auto">regarding the missing bushings,</p>
<p dir="auto">what would happen if you peened the pins like you would on an alox for the missing bushings and then glued on cellidor?</p>
<p dir="auto">do the bushings serve another function besides being the spot where the cellidor scales anchor too?</p>
]]></description><link>https://multitool.ninja/post/656891</link><guid isPermaLink="true">https://multitool.ninja/post/656891</guid><dc:creator><![CDATA[WiSAKfan]]></dc:creator><pubDate>Sun, 02 Dec 2012 16:58:00 GMT</pubDate></item><item><title><![CDATA[Reply to I did it!!! on Sun, 02 Dec 2012 16:08:20 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/gigahz" aria-label="Profile: GigaHz">@<bdi>GigaHz</bdi></a> <a href="/post/656871">said</a>:<br />
Lot of brute force and patience.</p>
</blockquote>
<p dir="auto">plenty of the former, at times i lack the later.... <img src="/assets/uploads/smileys/oops2.gif" alt=":oops:" title="oops" class="forum-smiley emoji" /></p>
<p dir="auto">thanks for the tips so quickly</p>
]]></description><link>https://multitool.ninja/post/656875</link><guid isPermaLink="true">https://multitool.ninja/post/656875</guid><dc:creator><![CDATA[WiSAKfan]]></dc:creator><pubDate>Sun, 02 Dec 2012 16:08:20 GMT</pubDate></item><item><title><![CDATA[Reply to I did it!!! on Sun, 02 Dec 2012 15:28:39 GMT]]></title><description><![CDATA[<p dir="auto">I can picture doing it, but I think I see why you say just to take it apart as its faster. :D</p>
]]></description><link>https://multitool.ninja/post/656872</link><guid isPermaLink="true">https://multitool.ninja/post/656872</guid><dc:creator><![CDATA[Syph007]]></dc:creator><pubDate>Sun, 02 Dec 2012 15:28:39 GMT</pubDate></item><item><title><![CDATA[Reply to I did it!!! on Sun, 02 Dec 2012 15:10:41 GMT]]></title><description><![CDATA[<p dir="auto">Lot of brute force and patience. I used a screwdriver to push down on the spring. The brass rod needs to be sharpened to a point and lots of oil.</p>
]]></description><link>https://multitool.ninja/post/656871</link><guid isPermaLink="true">https://multitool.ninja/post/656871</guid><dc:creator><![CDATA[GigaHz]]></dc:creator><pubDate>Sun, 02 Dec 2012 15:10:41 GMT</pubDate></item><item><title><![CDATA[Reply to I did it!!! on Sun, 02 Dec 2012 15:07:08 GMT]]></title><description><![CDATA[<p dir="auto">yeah it seems tricky</p>
<p dir="auto">any tips on how you pushed the spring in order to get the blade in there?</p>
<p dir="auto">(got an idea on the OHT but don't want to take it all apart)</p>
]]></description><link>https://multitool.ninja/post/656869</link><guid isPermaLink="true">https://multitool.ninja/post/656869</guid><dc:creator><![CDATA[WiSAKfan]]></dc:creator><pubDate>Sun, 02 Dec 2012 15:07:08 GMT</pubDate></item><item><title><![CDATA[Reply to I did it!!! on Sun, 02 Dec 2012 12:46:16 GMT]]></title><description><![CDATA[<p dir="auto">I changed the main blade on a 6 layer Champion. I only drilled out one rivet. Not an easy job. It would be much faster and easier to dissemble the whole thing.</p>
]]></description><link>https://multitool.ninja/post/656848</link><guid isPermaLink="true">https://multitool.ninja/post/656848</guid><dc:creator><![CDATA[GigaHz]]></dc:creator><pubDate>Sun, 02 Dec 2012 12:46:16 GMT</pubDate></item><item><title><![CDATA[Reply to I did it!!! on Sun, 02 Dec 2012 07:31:07 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/wisakfan" aria-label="Profile: WiSAKfan">@<bdi>WiSAKfan</bdi></a> <a href="/post/656781">said</a>:<br />
heinz did you ever attempt to switch just the knife without taking it all apart?</p>
<p dir="auto">inquiring minds want to know  <img src="/assets/uploads/smileys/1196453940-SAKgif.gif" alt=":climber:" title=":climber:" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">Not yet.  I'm waiting till I can get a new pair of plus scales before I do that.</p>
]]></description><link>https://multitool.ninja/post/656820</link><guid isPermaLink="true">https://multitool.ninja/post/656820</guid><dc:creator><![CDATA[Heinz Doofenshmirtz]]></dc:creator><pubDate>Sun, 02 Dec 2012 07:31:07 GMT</pubDate></item><item><title><![CDATA[Reply to I did it!!! on Sun, 02 Dec 2012 03:29:49 GMT]]></title><description><![CDATA[<p dir="auto">heinz did you ever attempt to switch just the knife without taking it all apart?</p>
<p dir="auto">inquiring minds want to know  <img src="/assets/uploads/smileys/1196453940-SAKgif.gif" alt=":climber:" title=":climber:" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/656781</link><guid isPermaLink="true">https://multitool.ninja/post/656781</guid><dc:creator><![CDATA[WiSAKfan]]></dc:creator><pubDate>Sun, 02 Dec 2012 03:29:49 GMT</pubDate></item><item><title><![CDATA[Reply to I did it!!! on Wed, 28 Nov 2012 17:05:28 GMT]]></title><description><![CDATA[<p dir="auto">Tomorrow would be fine, I can make some time in the afternoon to hang out...  my garage is a bit of a disaster though... but still room to work and chill...  <img src="/assets/uploads/smileys/whistle.gif" alt=":whistle:" title="Whistle" class="forum-smiley emoji" />  Oh, and I'm fond of IPA's.   :D  Give me a ring this afternoon... I'll PM you my cell if you need it.</p>
]]></description><link>https://multitool.ninja/post/655824</link><guid isPermaLink="true">https://multitool.ninja/post/655824</guid><dc:creator><![CDATA[Heinz Doofenshmirtz]]></dc:creator><pubDate>Wed, 28 Nov 2012 17:05:28 GMT</pubDate></item><item><title><![CDATA[Reply to I did it!!! on Wed, 28 Nov 2012 09:04:08 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto">@Heinz Doofenshmirtz <a href="/post/655736">said</a>:</p>
<p dir="auto">@captain spaulding <a href="/post/655646">said</a>:</p>
<blockquote>
<p dir="auto">[quote author=Heinz Doofenshmirtz link=topic=41024.msg655578#msg655578 date=1354048406]<br />
I'm already planning a bladeless SAK too, for my son.  I was telling him about how I'm learning to do mods, and that if he wanted to work on it with me, we could make such a beast.  That way he could have it with him at school and not get into trouble for it.</p>
</blockquote>
<p dir="auto">That would be great for your son.  <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" />  Good work on the Yeoman by the way. Once you get your bearing in the MOD world I might be your first customer if you start doing work for others.  <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" />   ;)   We can talk about it when the time comes.   <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
<p dir="auto">I have been thinking about getting into modding as well (SAK'S). My last project was a Micra that Steve had to put back together for me.  <img src="/assets/uploads/smileys/facepalm.gif" alt=":facepalm:" title="Facepalm" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">I doubt I'm going to be doing anything for anyone where I'm charging or asking for trades any time soon, but let me know and let's get together and I'll show you what little I've learned!  I have a little spot under my workbench in the garage where one of those little "icecube" coolers fits perfectly... be great for a couple sixers of beer!</p>
<p dir="auto">I wouldn't feel to bad about your Micra... I was afraid I'd end up in the same situation!... begging Steve or Syph to put it all back together for me...   <img src="/assets/uploads/smileys/whistle.gif" alt=":whistle:" title="Whistle" class="forum-smiley emoji" />  It's like anything else, it takes courage and practice.  (A mantra I've been telling my son for a few years now.   <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /> )</p>
<p dir="auto">I might be over that way tomorrow or Thursday and if so we can talk. If not im going out of town for a while so we could talk when I get back. If I do head that way tomorrow or the next day (and your around) what kind of beer do you like? I wouldn't mind putting a few back and talking tools. I can bring my EDC box of goodies.  :ahhh  Possible trades.  <img src="/assets/uploads/smileys/thinking.gif" alt=":think:" title="Thinking" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/thinking.gif" alt=":think:" title="Thinking" class="forum-smiley emoji" />  Sorry just thinking to much now. Anyways I will let you know if I will be in the area.  <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /></p>
<p dir="auto">On a side note I might have to take you up on your offer to sharpen my Dragonfly.</p>
]]></description><link>https://multitool.ninja/post/655741</link><guid isPermaLink="true">https://multitool.ninja/post/655741</guid><dc:creator><![CDATA[captain spaulding]]></dc:creator><pubDate>Wed, 28 Nov 2012 09:04:08 GMT</pubDate></item><item><title><![CDATA[Reply to I did it!!! on Wed, 28 Nov 2012 07:14:34 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto">@captain spaulding <a href="/post/655646">said</a>:</p>
<p dir="auto">@Heinz Doofenshmirtz <a href="/post/655578">said</a>:</p>
<blockquote>
<p dir="auto">I'm already planning a bladeless SAK too, for my son.  I was telling him about how I'm learning to do mods, and that if he wanted to work on it with me, we could make such a beast.  That way he could have it with him at school and not get into trouble for it.</p>
</blockquote>
<p dir="auto">That would be great for your son.  <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" />  Good work on the Yeoman by the way. Once you get your bearing in the MOD world I might be your first customer if you start doing work for others.  <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" />   ;)   We can talk about it when the time comes.   <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
<p dir="auto">I have been thinking about getting into modding as well (SAK'S). My last project was a Micra that Steve had to put back together for me.  <img src="/assets/uploads/smileys/facepalm.gif" alt=":facepalm:" title="Facepalm" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">I doubt I'm going to be doing anything for anyone where I'm charging or asking for trades any time soon, but let me know and let's get together and I'll show you what little I've learned!  I have a little spot under my workbench in the garage where one of those little "icecube" coolers fits perfectly... be great for a couple sixers of beer!</p>
<p dir="auto">I wouldn't feel to bad about your Micra... I was afraid I'd end up in the same situation!... begging Steve or Syph to put it all back together for me...   <img src="/assets/uploads/smileys/whistle.gif" alt=":whistle:" title="Whistle" class="forum-smiley emoji" />  It's like anything else, it takes courage and practice.  (A mantra I've been telling my son for a few years now.   <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /> )</p>
<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/wisakfan" aria-label="Profile: WiSAKfan">@<bdi>WiSAKfan</bdi></a> <a href="/post/655720">said</a>:</p>
<p dir="auto">@Heinz Doofenshmirtz <a href="/post/655577">said</a>:</p>
<blockquote></blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/wisakfan" aria-label="Profile: WiSAKfan">@<bdi>WiSAKfan</bdi></a> <a href="/post/655506">said</a>:</p>
<blockquote>
<blockquote></blockquote>
</blockquote>
<p dir="auto">@Heinz Doofenshmirtz <a href="/post/655426">said</a>:</p>
<blockquote>
<blockquote>
<blockquote>
<p dir="auto">[quote author=WiSAKfan link=topic=41024.msg655422#msg655422 date=1353986013]<br />
[quote author=Zed link=topic=41024.msg655322#msg655322 date=1353964624]<br />
Well done mate  <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /> I really want to do a 108mm mod but not sure I have the balls to take it apart.  :-\</p>
</blockquote>
<p dir="auto">taking it apart is the easy part ;)</p>
</blockquote>
<p dir="auto">I wouldn't say that... at least not for me... It took me a bit of practice to be able to drill out the pins without destroying the bushings.</p>
</blockquote>
<p dir="auto">what size bit were you using?</p>
</blockquote>
<p dir="auto">Don't remember what it was in standard, but I'm pretty sure the metric diameter was 1.8 mm.  I also got a center punch to mark the pins to start drilling, and once I did that, it got a lot easier.  Throttling down my drill to a lower RPM also helped.<br />
[/quote]</p>
<p dir="auto">try a smaller bit next time, it doesn't fully hollow out pin but it also won't damage bushings...then i use a punch to gently force the pin down out of bushing making sure the other side bushing is over a hole in my mod board to allow it move out...</p>
<p dir="auto">it's kinda like de-peening<br />
[/quote]<br />
That's kind of how I've been doing it... trying to drill down into the pin just enough to weaken the peen so I can punch it out with a pin punch.  I specifically bought a new set of pin punches for this, and the center punch too.  I haven't done any real machining since my shop classes in HS, but some of it's coming back to me...  :)</p>
<p dir="auto">Once I get the drilling done, I've been placing the SAK over the jaws of my vise, opened just enough to allow the bushing to fit inside so the knife sits flat on top of the jaws, then punching the pin out.  I put a piece of paper or a paper towel underneath it to catch the pin and bushing when it comes out.</p>
<p dir="auto">I've found that a couple of wraps of the blue painters' masking tape around the knife, one between each set of the pins, holds everything together once all the pins are out.  Next time, I'm going to be a lot more careful taking the tape off, so I can preserve the order of the parts so I don't have to figure it out all over again when I'm putting it back together.</p>
<p dir="auto">My next project, other than swapping out the new blade for the old blade in my Yeoman, will be to do a bladeless one for my son.  Not sure what model to start with yet, but he's at the age where he's really starting to get into computer gaming, and is interested in building his own PC, so I might make a bladeless CT34 for him.  I'll figure it out sooner or later.</p>
<p dir="auto">Oh, and thanks again for all the kind words and encouragement everyone!  You guys are great!  I love being part of this forum!  You guys rock!</p>
]]></description><link>https://multitool.ninja/post/655736</link><guid isPermaLink="true">https://multitool.ninja/post/655736</guid><dc:creator><![CDATA[Heinz Doofenshmirtz]]></dc:creator><pubDate>Wed, 28 Nov 2012 07:14:34 GMT</pubDate></item><item><title><![CDATA[Reply to I did it!!! on Wed, 28 Nov 2012 04:34:50 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto">@Heinz Doofenshmirtz <a href="/post/655577">said</a>:</p>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/wisakfan" aria-label="Profile: WiSAKfan">@<bdi>WiSAKfan</bdi></a> <a href="/post/655506">said</a>:</p>
<blockquote></blockquote>
<p dir="auto">@Heinz Doofenshmirtz <a href="/post/655426">said</a>:</p>
<blockquote>
<blockquote></blockquote>
</blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/wisakfan" aria-label="Profile: WiSAKfan">@<bdi>WiSAKfan</bdi></a> <a href="/post/655422">said</a>:</p>
<blockquote>
<blockquote>
<blockquote>
<p dir="auto">[quote author=Zed link=topic=41024.msg655322#msg655322 date=1353964624]<br />
Well done mate  <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /> I really want to do a 108mm mod but not sure I have the balls to take it apart.  :-\</p>
</blockquote>
<p dir="auto">taking it apart is the easy part ;)</p>
</blockquote>
<p dir="auto">I wouldn't say that... at least not for me... It took me a bit of practice to be able to drill out the pins without destroying the bushings.</p>
</blockquote>
<p dir="auto">what size bit were you using?</p>
</blockquote>
<p dir="auto">Don't remember what it was in standard, but I'm pretty sure the metric diameter was 1.8 mm.  I also got a center punch to mark the pins to start drilling, and once I did that, it got a lot easier.  Throttling down my drill to a lower RPM also helped.<br />
[/quote]</p>
<p dir="auto">try a smaller bit next time, it doesn't fully hollow out pin but it also won't damage bushings...then i use a punch to gently force the pin down out of bushing making sure the other side bushing is over a hole in my mod board to allow it move out...</p>
<p dir="auto">it's kinda like de-peening</p>
]]></description><link>https://multitool.ninja/post/655720</link><guid isPermaLink="true">https://multitool.ninja/post/655720</guid><dc:creator><![CDATA[WiSAKfan]]></dc:creator><pubDate>Wed, 28 Nov 2012 04:34:50 GMT</pubDate></item><item><title><![CDATA[Reply to I did it!!! on Tue, 27 Nov 2012 23:54:20 GMT]]></title><description><![CDATA[<p dir="auto">Sounds like a good plan Heinz.Not only his first SAK,but built by dad too!</p>
]]></description><link>https://multitool.ninja/post/655653</link><guid isPermaLink="true">https://multitool.ninja/post/655653</guid><dc:creator><![CDATA[kirk13]]></dc:creator><pubDate>Tue, 27 Nov 2012 23:54:20 GMT</pubDate></item></channel></rss>