<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0"><channel><title><![CDATA[Wave vs Charge]]></title><description><![CDATA[<p dir="auto">Ok, I have a confession to make.  Yesterday, installing windows it wasn't actually a Leatherman Charge that I used.  Actually, I used my Leatherman Wave.</p>
<p dir="auto">What I found is this:</p>
<p dir="auto">The Wave is much thinner for pocket carry.  Surprisingly so.  Yes, the handles are a little less comfortable, but by no means a deal breaker.</p>
<p dir="auto">I also miss the guthook, but honestly, that can be pretty easily worked around too.</p>
<p dir="auto">For me, the Wave is essentially as good as a Charge TTi or AL and I wouldn't pay more than $10 more for the premium versions.</p>
<p dir="auto">The Charge ALX, however, does give the user an extra bit driver, which I find hugely helpful.  And of course you get the guthook too, which I like as well.</p>
<p dir="auto">So my final breakdown comes as such:</p>
<p dir="auto">IF you feel you'd benefit from having 2 bit drivers on board, the Charge ALX is definitely worth the premium price.</p>
<p dir="auto">If not, I don't see the Charge TTi or AL offering a lot over the standard Wave.  (And you give up a bit of thinness for the premium scales.)</p>
]]></description><link>https://multitool.ninja/topic/41795/wave-vs-charge</link><generator>RSS for Node</generator><lastBuildDate>Mon, 16 Nov 2026 18:09:48 GMT</lastBuildDate><atom:link href="https://multitool.ninja/topic/41795.rss" rel="self" type="application/rss+xml"/><pubDate>Wed, 02 Jan 2013 15:14:03 GMT</pubDate><ttl>60</ttl><item><title><![CDATA[Reply to Wave vs Charge on Wed, 09 Jan 2013 10:29:46 GMT]]></title><description><![CDATA[<p dir="auto">Got the idea from <a href="/topic/21945">this post</a>, and used a Super Tool 300 awl in place of the flathead. Used the flathead as a guide, then put it on the ST300.</p>
<p dir="auto">Now that the Rebar came out, and purchased one, am drooling at the newer awl. The one I fitted into the TTi wasn't pretty for my first go at it. Lining up them blasted washers was the worst part. (So wants a jig!)<br />
Had tried to drill the flathead first before eventually resorting to that method. Burned up 2 bits, broke one, and dulled a few others - never made a dent. Not sure what you need to put a decent hole on the flathead. Then read a post where a certain fella said, "It's your tool, make it like you want it."</p>
<p dir="auto">Am currently EDCing the Charge TTi &amp; Rebar, but not sure for how long. Sure I'd like to see if the Rebar's awl would fit, but I don't want to mess up the Rebar - just want the awl.  :D<br />
Would a trip to Portland land me points to a modified tool? Doubtful. Think Lady Juli are mad at me over a flashlight issue I had with those Zen Imports renegers. <strong>¤¤¤¤</strong></p>
<p dir="auto">Luv my TTi, but half the tools I want are on the Rebar. So once again and dual-EDCing until I decide where to proceed. A <strong>blade exchanger</strong> on the Charge could <em>offer more advantages</em> &amp; remedy a lot of requests.</p>
<p dir="auto">• Saw<br />
• Metal/Hack Saw<br />
• Small Hobbyist Saw<br />
• File, Diamond grit &amp; Crosscut<br />
• Awl with Threadloop<br />
• Long &amp; Thin Magnifier<br />
• Spork<br />
• Magnetic Retrieval Extension<br />
• Bigger Scissors<br />
• Strap Cutter</p>
<p dir="auto"><strong>¤¤¤¤</strong> (Zen Imports: "Sorry, we can't ship batteries." Duh, _____ take the ______ batteries out. Thing was they reneged on a deal they made &amp; that they offered up in the first place. "We'll send your mom a P5." Was so excited I told mom about the photo I had submitted &amp; that Zen Imports was sending her a LED Lenser P5.After about 2 weeks and nothing, sent them an email inquiring about the flashlight. That's when they said they can't ship flashlights with batteries. ((Guess the batteries appear in those packages by osmosis.)) Had to tell her the bad news and I felt like smurf for a long time.<br />
Stupid me whined to Juli about Zen, and after proving the validity Juli said she'd honor the deal that Zen Imports reneged on. But... I told her I don't want anything from them or Zen Imports. ~ I was mad at Zen Imports, and they can KMA for all I care. They done lost my respect for the position that this placed me in. Mom was let down.<br />
Wanted the light, yes. Felt that my online friendship wasn't worth begging for a light over, no matter how bad I wanted one. Lady Juli shouldn't have to cover for them smurfin' idiots.)</p>
<p dir="auto">Note: Last year I got mom a P5 and she's been using it several times a day/night, and even sleeps with it. Is the best gift ever for an elderly person, especially in her case - having to take a chihuahua outside at night to lay landmines in the lawn. Having to train her to replace the AA battery when it gets wore down is another thing... reminds me, i should check the battery again. This is one of those times one wished the rechargeable version was affordable.</p>
]]></description><link>https://multitool.ninja/post/671487</link><guid isPermaLink="true">https://multitool.ninja/post/671487</guid><dc:creator><![CDATA[Outback in Idaho]]></dc:creator><pubDate>Wed, 09 Jan 2013 10:29:46 GMT</pubDate></item><item><title><![CDATA[Reply to Wave vs Charge on Wed, 09 Jan 2013 04:45:15 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/chris777" aria-label="Profile: chris777">@<bdi>chris777</bdi></a> <a href="/post/671376">said</a>:<br />
I may have to grind down my flat blade into an awl since its redundant.</p>
</blockquote>
<p dir="auto">I did this on my TTi and am happy.  It took a while as I used the diamond files on a couple of my other multis to do it.  I didn't have any other means of doing it, but it came out pretty decent imo, and will be sufficient.</p>
]]></description><link>https://multitool.ninja/post/671399</link><guid isPermaLink="true">https://multitool.ninja/post/671399</guid><dc:creator><![CDATA[Monrogue]]></dc:creator><pubDate>Wed, 09 Jan 2013 04:45:15 GMT</pubDate></item><item><title><![CDATA[Reply to Wave vs Charge on Wed, 09 Jan 2013 03:51:31 GMT]]></title><description><![CDATA[<p dir="auto">I recently lost my charge tti, and had to go back to the wave, and I miss my charge.  Its a little thicker, but after getting used to a wave in my pocket the charge is actually easier reaching in and out of my pocket.  I could have never paid retail for the charge So unless you find a deal on ebay or CL like I did then yes they are basically the same tool except the charges bonuses and the only minus in my opinion is the cap crimper which i have rarely had use for. I hope Lm redesigns the wave like the curved handles on the rebar. My biggest issue with the wave is i kept getting blood blisters when the ruler pinched my hand, Plus the compfort of the charge. if they rounded/polished the edges, it would help. Also wouldn't mind seeing texture for grip like the new TTI.(which I think btw ruined a classic) I may have to grind down my flat blade into an awl since its redundant.</p>
]]></description><link>https://multitool.ninja/post/671376</link><guid isPermaLink="true">https://multitool.ninja/post/671376</guid><dc:creator><![CDATA[chris777]]></dc:creator><pubDate>Wed, 09 Jan 2013 03:51:31 GMT</pubDate></item><item><title><![CDATA[Reply to Wave vs Charge on Fri, 04 Jan 2013 18:43:48 GMT]]></title><description><![CDATA[<p dir="auto">I'm with ya , the high end steel isn't a big issue as I always pack a folder . The Wave is a better bang for the buck .</p>
<p dir="auto">Chris</p>
]]></description><link>https://multitool.ninja/post/669088</link><guid isPermaLink="true">https://multitool.ninja/post/669088</guid><dc:creator><![CDATA[Styerman]]></dc:creator><pubDate>Fri, 04 Jan 2013 18:43:48 GMT</pubDate></item><item><title><![CDATA[Reply to Wave vs Charge on Fri, 04 Jan 2013 16:20:31 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/scorpion008" aria-label="Profile: scorpion008">@<bdi>scorpion008</bdi></a> <a href="/post/668504">said</a>:<br />
Speaking of drivers, do you guys find the leatherman bit kit useful (as in, is it worth $15 Canadian) especially if you are using a pocket clip instead of a sheath?</p>
</blockquote>
<p dir="auto">Can't say I've used it a lot, but I like the feeling of not having to do without, if and when I need it.</p>
]]></description><link>https://multitool.ninja/post/668998</link><guid isPermaLink="true">https://multitool.ninja/post/668998</guid><dc:creator><![CDATA[Landrew]]></dc:creator><pubDate>Fri, 04 Jan 2013 16:20:31 GMT</pubDate></item><item><title><![CDATA[Reply to Wave vs Charge on Fri, 04 Jan 2013 11:39:12 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/bmot" aria-label="Profile: bmot">@<bdi>bmot</bdi></a> <a href="/post/668697">said</a>:<br />
Is there any way to take care of this at home? Being in the Netherlands, and my wave being second-hand, so I don't know where it was bought, I wouldn't like to have to send it all the way to the states...</p>
</blockquote>
<p dir="auto">Your local dealer should take care of it, irrespective of where you got it from.<br />
You may have to pay something, however, like they do here.</p>
]]></description><link>https://multitool.ninja/post/668895</link><guid isPermaLink="true">https://multitool.ninja/post/668895</guid><dc:creator><![CDATA[dks]]></dc:creator><pubDate>Fri, 04 Jan 2013 11:39:12 GMT</pubDate></item><item><title><![CDATA[Reply to Wave vs Charge on Thu, 03 Jan 2013 23:53:03 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/stealth007s" aria-label="Profile: stealth007s">@<bdi>stealth007s</bdi></a> <a href="/post/668305">said</a>:<br />
Does your Charge hang up when you go to close it?</p>
</blockquote>
<p dir="auto">Any of the tools with folding pliers can. Not that they do it a lot.<br />
Lubrication, working all the parts in &amp; general use, kept clean after use, and all bolts kept taut.</p>
<p dir="auto">As for my TTi, the bolts on the pliers pivot don't move when opening the outside tools like with the Surge &amp; Wave. So can't say I have seen it on this one. But I lubricate with a teflon based oil, and never have used WD-40 or any other solvent on my multitools.</p>
]]></description><link>https://multitool.ninja/post/668717</link><guid isPermaLink="true">https://multitool.ninja/post/668717</guid><dc:creator><![CDATA[Outback in Idaho]]></dc:creator><pubDate>Thu, 03 Jan 2013 23:53:03 GMT</pubDate></item><item><title><![CDATA[Reply to Wave vs Charge on Thu, 03 Jan 2013 23:02:44 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/scorpion008" aria-label="Profile: scorpion008">@<bdi>scorpion008</bdi></a> <a href="/post/668379">said</a>:</p>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/turnsouth" aria-label="Profile: turnsouth">@<bdi>turnsouth</bdi></a> <a href="/post/668353">said</a>:</p>
<blockquote></blockquote>
</blockquote>
<ul>
<li>But the biggest reason is the outside blade fasteners. After using the blade on the Wave <strong>a lot</strong>, I've found that as it wears in at the pivot, and starts to move easier, that the pivot bolts will eventually start to turn with the blade and "spin" to an area that is not as worn. It would end up to where one time I opened the blade it came out easily, and then the next time it pushed out hard like a new tool. I've even got them back from warranty like this and had to return them. Started to make a point of specifically noting the issue on the warranty forms to make sure that it was addressed.</li>
</ul>
<blockquote>
<blockquote>
<p dir="auto"><img src="/assets/uploads/smileys/shrug.gif" alt=":shrug:" title="Shrug" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">Dude, I thought that was just how they worked. So happy that there is hope. When open and closing my Wave's pliers one side would start to stick ~30 degrees from open and less so when closing. End result: Blade fasteners would spin one way and not the other causing my serrated to scrap against the scales sometimes and not others also it was looser sometimes than others.</p>
</blockquote>
<p dir="auto">Is there any way to take care of this at home? Being in the Netherlands, and my wave being second-hand, so I don't know where it was bought, I wouldn't like to have to send it all the way to the states...</p>
]]></description><link>https://multitool.ninja/post/668697</link><guid isPermaLink="true">https://multitool.ninja/post/668697</guid><dc:creator><![CDATA[bmot]]></dc:creator><pubDate>Thu, 03 Jan 2013 23:02:44 GMT</pubDate></item><item><title><![CDATA[Reply to Wave vs Charge on Thu, 03 Jan 2013 19:31:07 GMT]]></title><description><![CDATA[<p dir="auto">Just realized that the #1 comes with the #2, which is redundant. So, if anyone has a spare #0 (opposite side is #3) Philips bit, I would be eternally grateful. <img src="/assets/uploads/smileys/mailbox.gif" alt=":mail:" title="mail" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /> I don't use hex bits a lot and I think that between that bit and the included one I would be set.</p>
]]></description><link>https://multitool.ninja/post/668573</link><guid isPermaLink="true">https://multitool.ninja/post/668573</guid><dc:creator><![CDATA[scorpion008]]></dc:creator><pubDate>Thu, 03 Jan 2013 19:31:07 GMT</pubDate></item><item><title><![CDATA[Reply to Wave vs Charge on Thu, 03 Jan 2013 19:20:59 GMT]]></title><description><![CDATA[<p dir="auto">Personally I hardly ever pocket carry either, so the size has never been an issue. I do prefer the TTi, and that's the one I mostly use because I like the tool set.</p>
<p dir="auto">I'd probably be just as happy with the Wave handles and the right tools - maybe Metro will sell me his when he tires of it :D</p>
]]></description><link>https://multitool.ninja/post/668558</link><guid isPermaLink="true">https://multitool.ninja/post/668558</guid><dc:creator><![CDATA[nuphoria]]></dc:creator><pubDate>Thu, 03 Jan 2013 19:20:59 GMT</pubDate></item><item><title><![CDATA[Reply to Wave vs Charge on Thu, 03 Jan 2013 19:15:28 GMT]]></title><description><![CDATA[<p dir="auto">Here's the image only because:</p>
<p dir="auto"><img src="/assets/uploads/smileys/worthless.gif" alt=":worthless:" title="Post Pictures Now!" class="forum-smiley emoji" /></p>
<p dir="auto"><img src="/assets/uploads/smileys/rofl.gif" alt=":rofl:" title="rofl" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/rofl.gif" alt=":rofl:" title="rofl" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/rofl.gif" alt=":rofl:" title="rofl" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/rofl.gif" alt=":rofl:" title="rofl" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/rofl.gif" alt=":rofl:" title="rofl" class="forum-smiley emoji" /></p>
<p dir="auto">Sent from Endor using Schlapatok</p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/42453_ImageUploadedByTapatalk1357240444.127557.jpg" alt="ImageUploadedByTapatalk1357240444.127557.jpg" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/668551</link><guid isPermaLink="true">https://multitool.ninja/post/668551</guid><dc:creator><![CDATA[stealth007s]]></dc:creator><pubDate>Thu, 03 Jan 2013 19:15:28 GMT</pubDate></item><item><title><![CDATA[Reply to Wave vs Charge on Thu, 03 Jan 2013 19:14:08 GMT]]></title><description><![CDATA[<p dir="auto">Would it be a crazy idea to put, say, one or two bits in that little inner pocket in my jeans and pocket-clip carry the wave on the same side? All I really want is a #1 or #0 Philips (which ever one is closer to the midpoint between the two included Wave bits). If someone has an extra, I would sure be grateful <img src="/assets/uploads/smileys/whistle.gif" alt=":whistle:" title="Whistle" class="forum-smiley emoji" />  ;).</p>
]]></description><link>https://multitool.ninja/post/668549</link><guid isPermaLink="true">https://multitool.ninja/post/668549</guid><dc:creator><![CDATA[scorpion008]]></dc:creator><pubDate>Thu, 03 Jan 2013 19:14:08 GMT</pubDate></item><item><title><![CDATA[Reply to Wave vs Charge on Thu, 03 Jan 2013 19:10:36 GMT]]></title><description><![CDATA[<p dir="auto">I kind of have the same setup except I use my molle pouch just for the bits and the driver extender only. My MUT stays clipped inside my belt until I find a holster for it  <img src="/assets/uploads/smileys/thinking.gif" alt=":think:" title="Thinking" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/thinking.gif" alt=":think:" title="Thinking" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/thinking.gif" alt=":think:" title="Thinking" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/thinking.gif" alt=":think:" title="Thinking" class="forum-smiley emoji" /> I'll post a pic in a bit from Schlapatok on my phone as it's easier for me to post images from there.</p>
]]></description><link>https://multitool.ninja/post/668543</link><guid isPermaLink="true">https://multitool.ninja/post/668543</guid><dc:creator><![CDATA[stealth007s]]></dc:creator><pubDate>Thu, 03 Jan 2013 19:10:36 GMT</pubDate></item><item><title><![CDATA[Reply to Wave vs Charge on Thu, 03 Jan 2013 19:05:57 GMT]]></title><description><![CDATA[<p dir="auto">[quote author=scorpion008 link=topic=41795.msg1#msg1 date=1357238561]<br />
Speaking of drivers, do you guys find the leatherman bit kit useful (as in, is it worth $15 Canadian) especially if you are using a pocket clip instead of a sheath?<br />
[/quote</p>
<p dir="auto">It's to heavy for me to pocket carry. So I go with the voodo sheath. As for the bit kit and extender I dig it. Use it all the time.<br />
<img src="http://img.tapatalk.com/d/13/01/04/yrure7ys.jpg" alt="" class="img-markdown  img-fluid" /><img src="http://img.tapatalk.com/d/13/01/04/7amu7y2e.jpg" alt="" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/668535</link><guid isPermaLink="true">https://multitool.ninja/post/668535</guid><dc:creator><![CDATA[colt 1911]]></dc:creator><pubDate>Thu, 03 Jan 2013 19:05:57 GMT</pubDate></item><item><title><![CDATA[Reply to Wave vs Charge on Thu, 03 Jan 2013 19:05:38 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/scorpion008" aria-label="Profile: scorpion008">@<bdi>scorpion008</bdi></a> <a href="/post/668504">said</a>:<br />
Speaking of drivers, do you guys find the leatherman bit kit useful (as in, is it worth $15 Canadian) especially if you are using a pocket clip instead of a sheath?</p>
</blockquote>
<p dir="auto">I find it extremely useful.  I put a #2Ph/Standard bit in one driver and a 4/5mm Allan in the other.  That covers about 75% of my fastener needs.  If I know I'm going to be working on a more diverse group of fasteners, I'll bring the cards along.</p>
<p dir="auto">Generally though, I don't need them along.</p>
]]></description><link>https://multitool.ninja/post/668533</link><guid isPermaLink="true">https://multitool.ninja/post/668533</guid><dc:creator><![CDATA[Mr. Whippy]]></dc:creator><pubDate>Thu, 03 Jan 2013 19:05:38 GMT</pubDate></item><item><title><![CDATA[Reply to Wave vs Charge on Thu, 03 Jan 2013 19:04:55 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/scorpion008" aria-label="Profile: scorpion008">@<bdi>scorpion008</bdi></a> <a href="/post/668504">said</a>:<br />
Speaking of drivers, do you guys find the leatherman bit kit useful (as in, is it worth $15 Canadian) especially if you are using a pocket clip instead of a sheath?</p>
</blockquote>
<p dir="auto">I'm in agreement with Monrogue, even when I carried them in my sheath I didn't use them much.<br />
On the other hand, I always make sure I have the kit when traveling, it comes in quite handy.</p>
]]></description><link>https://multitool.ninja/post/668531</link><guid isPermaLink="true">https://multitool.ninja/post/668531</guid><dc:creator><![CDATA[turnsouth]]></dc:creator><pubDate>Thu, 03 Jan 2013 19:04:55 GMT</pubDate></item><item><title><![CDATA[Reply to Wave vs Charge on Thu, 03 Jan 2013 18:58:20 GMT]]></title><description><![CDATA[<p dir="auto">I actually have all 3 (Wave, Charge AL and TTi) and I like them all.  The Wave is in my car as a backup.  I do like it's thinner profile in comparison, but I still like the looks of the Charges better.  My multitools don't get put through heavy use, so I prefer to carry one of the Charges, but if I expect some heavier or dirtier use, I prefer the Wave.  I think of that as my beater version :D</p>
]]></description><link>https://multitool.ninja/post/668521</link><guid isPermaLink="true">https://multitool.ninja/post/668521</guid><dc:creator><![CDATA[Monrogue]]></dc:creator><pubDate>Thu, 03 Jan 2013 18:58:20 GMT</pubDate></item><item><title><![CDATA[Reply to Wave vs Charge on Thu, 03 Jan 2013 18:55:17 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/scorpion008" aria-label="Profile: scorpion008">@<bdi>scorpion008</bdi></a> <a href="/post/668504">said</a>:<br />
Speaking of drivers, do you guys find the leatherman bit kit useful (as in, is it worth $15 Canadian) especially if you are using a pocket clip instead of a sheath?</p>
</blockquote>
<p dir="auto">For me, I am not finding it useful really.  I got it along with the extender, but since I pocket carry and don't like to use the sheath, I don't end up carrying any of that extra stuff with me.</p>
]]></description><link>https://multitool.ninja/post/668516</link><guid isPermaLink="true">https://multitool.ninja/post/668516</guid><dc:creator><![CDATA[Monrogue]]></dc:creator><pubDate>Thu, 03 Jan 2013 18:55:17 GMT</pubDate></item><item><title><![CDATA[Reply to Wave vs Charge on Thu, 03 Jan 2013 18:42:41 GMT]]></title><description><![CDATA[<p dir="auto">Speaking of drivers, do you guys find the leatherman bit kit useful (as in, is it worth $15 Canadian) especially if you are using a pocket clip instead of a sheath?</p>
]]></description><link>https://multitool.ninja/post/668504</link><guid isPermaLink="true">https://multitool.ninja/post/668504</guid><dc:creator><![CDATA[scorpion008]]></dc:creator><pubDate>Thu, 03 Jan 2013 18:42:41 GMT</pubDate></item><item><title><![CDATA[Reply to Wave vs Charge on Thu, 03 Jan 2013 18:38:37 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto">@Xelkos <a href="/post/668300">said</a>:<br />
One of my bigger complaints is no awl on the Charge series. Leatherman seems to have a <em>fetish</em> with flathead drivers.</p>
</blockquote>
<p dir="auto">I agree.  I don't understand why they seem to avoid placing an awl in the Wave/Charge series as opposed to that flathead.  I actually filed the flathead down to an awl, or as close as I could get on my own.  I like it better than having that flathead, especially since there is already a flathead on the bit driver.</p>
]]></description><link>https://multitool.ninja/post/668500</link><guid isPermaLink="true">https://multitool.ninja/post/668500</guid><dc:creator><![CDATA[Monrogue]]></dc:creator><pubDate>Thu, 03 Jan 2013 18:38:37 GMT</pubDate></item><item><title><![CDATA[Reply to Wave vs Charge on Thu, 03 Jan 2013 14:03:17 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/turnsouth" aria-label="Profile: turnsouth">@<bdi>turnsouth</bdi></a> <a href="/post/668353">said</a>:</p>
</blockquote>
<ul>
<li>But the biggest reason is the outside blade fasteners. After using the blade on the Wave <strong>a lot</strong>, I've found that as it wears in at the pivot, and starts to move easier, that the pivot bolts will eventually start to turn with the blade and "spin" to an area that is not as worn. It would end up to where one time I opened the blade it came out easily, and then the next time it pushed out hard like a new tool. I've even got them back from warranty like this and had to return them. Started to make a point of specifically noting the issue on the warranty forms to make sure that it was addressed.</li>
</ul>
<blockquote>
<p dir="auto"><img src="/assets/uploads/smileys/shrug.gif" alt=":shrug:" title="Shrug" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">Dude, I thought that was just how they worked. So happy that there is hope. When open and closing my Wave's pliers one side would start to stick ~30 degrees from open and less so when closing. End result: Blade fasteners would spin one way and not the other causing my serrated to scrap against the scales sometimes and not others also it was looser sometimes than others.</p>
]]></description><link>https://multitool.ninja/post/668379</link><guid isPermaLink="true">https://multitool.ninja/post/668379</guid><dc:creator><![CDATA[scorpion008]]></dc:creator><pubDate>Thu, 03 Jan 2013 14:03:17 GMT</pubDate></item><item><title><![CDATA[Reply to Wave vs Charge on Thu, 03 Jan 2013 12:07:34 GMT]]></title><description><![CDATA[<p dir="auto">I've switched from the Wave to the Charge AL for three main reasons:</p>
<ul>
<li>
<p dir="auto">The added thickness of the Charge fits better in my hand. Doesn't pocket carry as comfortably, but I use a sheath 99% of the time anyway.</p>
</li>
<li>
<p dir="auto">I know it's cliché, but the blade does hold an edge better, especially when it's slightly dull. I've found that the 154 will stay "<em>sharp enough to still cut</em>" much longer than the 420.</p>
</li>
<li>
<p dir="auto">But the biggest reason is the outside blade fasteners. After using the blade on the Wave <strong>a lot</strong>, I've found that as it wears in at the pivot, and starts to move easier, that the pivot bolts will eventually start to turn with the blade and "spin" to an area that is not as worn. It would end up to where one time I opened the blade it came out easily, and then the next time it pushed out hard like a new tool. I've even got them back from warranty like this and had to return them. Started to make a point of specifically noting the issue on the warranty forms to make sure that it was addressed.</p>
</li>
</ul>
<p dir="auto"><img src="/assets/uploads/smileys/shrug.gif" alt=":shrug:" title="Shrug" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/668353</link><guid isPermaLink="true">https://multitool.ninja/post/668353</guid><dc:creator><![CDATA[turnsouth]]></dc:creator><pubDate>Thu, 03 Jan 2013 12:07:34 GMT</pubDate></item><item><title><![CDATA[Reply to Wave vs Charge on Thu, 03 Jan 2013 12:11:39 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto">@Xelkos <a href="/post/668300">said</a>:<br />
One thing I do <strong>not</strong> like about the TTi is that stupid cap crimper. Never understood why Leatherman put it there, as those in demolitions I would think would have a much more sophisticated tool. Unless it was meant for miners?  <img src="/assets/uploads/smileys/shrug.gif" alt=":shrug:" title="Shrug" class="forum-smiley emoji" /></p>
<p dir="auto">One of my bigger complaints is no awl on the Charge series. Leatherman seems to have a <em>fetish</em> with flat head drivers.</p>
</blockquote>
<p dir="auto">The first thing I did when i got my wave was swapping the pliers head with the wave. I'm really pleased.</p>
<p dir="auto">Take a look here <a href="http://edcforums.com/threads/my-modded-lm-charge-tti.98901/" rel="nofollow ugc">http://edcforums.com/threads/my-modded-lm-charge-tti.98901/</a>. I will post the whole project on this forum as soon as I am done.</p>
<p dir="auto">I recently grinded the large, fixed, flat head screwdriver into an awl, and it works really well. If you like to keep the flat head, but have a wave for donating parts (you talked about swapping the pliers head) you could always get rid of another tool, like the small bit holder or the scissors, and grind the flat head from the wave into an awl.</p>
]]></description><link>https://multitool.ninja/post/668351</link><guid isPermaLink="true">https://multitool.ninja/post/668351</guid><dc:creator><![CDATA[Montetobuso]]></dc:creator><pubDate>Thu, 03 Jan 2013 12:11:39 GMT</pubDate></item><item><title><![CDATA[Reply to Wave vs Charge on Thu, 03 Jan 2013 08:55:26 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto">@50ft-trad <a href="/post/667923">said</a>:<br />
The titanium charges and indeed the ALX don't hold any interest for me. The 420 blade on the Wave is perfectly adequate, and even with a dedicted folder I'll have a similar steel. I don't tend to chase the high end stainlesses due to chipping and being harder to sharpen - MUCH harder if they have chipped. The gut hook and cap crimper do not interest me either.</p>
<p dir="auto">I have one Charge and one only - I got the AL - but on a whim .... because it's my name  ::) It is the best looking of the range in my opinion, but the Wave does feel better in hand and in pocket as it's not quite as chunky</p>
<p dir="auto">Otherwise I think the Wave is an excellent tool, and unless you absolutely must have a second driver, gut hook or cap crimpers ... the Charges are merely an extravagant ego booster. Despite my frequent rants against LM in terms of quality and being seriously overhyped, I really do think everyone should at some point own a Wave (Along with a Spirit and a MP400/600/700/800). It really is a very good tool in it's own right, without the (unnecessary IMO) embelishments of the Charges  :)</p>
</blockquote>
<p dir="auto">I just added a couple more Al  <img src="/assets/uploads/smileys/whistle.gif" alt=":whistle:" title="Whistle" class="forum-smiley emoji" />   <img src="/assets/uploads/smileys/rofl.gif" alt=":rofl:" title="rofl" class="forum-smiley emoji" />  and although i love my Ti i still feel the wave is great value for money and a very god MT that everyone should try at some point on the MY journey  <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/668314</link><guid isPermaLink="true">https://multitool.ninja/post/668314</guid><dc:creator><![CDATA[Zed]]></dc:creator><pubDate>Thu, 03 Jan 2013 08:55:26 GMT</pubDate></item></channel></rss>