<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0"><channel><title><![CDATA[Fixed Plier Multi-Tools]]></title><description><![CDATA[<p dir="auto">I have noticed over the years here on the forum, fixed plier head tools come up often. Sometimes the discussion is about their strengths to due to fewer moving parts. There are some well known tools in this category and some not so well known. Tools. Here are a few thoughts on the tools I have.<br />
First is the junk category. Lots of no name tools. Some of them have quite a few tools.<br />
<img src="http://i246.photobucket.com/albums/gg113/terry6540/ADAF68D3-3ADA-412E-8E74-4C00E8522132-633-000000A48498C249.jpg" alt="" class="img-markdown  img-fluid" /><br />
Here is an interesting one. The hammer head can be removed and the tool is compatable with sockets and standard bits from the hardware store. Opening the wrench reveals that the top of the wrench serves as a nail puller for the hammer.<br />
<img src="http://i246.photobucket.com/albums/gg113/terry6540/AF5A4752-3EED-4D18-8084-571EEB761DF4-633-000000A47353CD8D.jpg" alt="" class="img-markdown  img-fluid" /><br />
I think it should be mentioned there are a lot of similar tools that have wrenches instead of the pliers. This post focuses on plier based tools.<br />
Next up is a group of sheffield tools. The two tools on the right have locking pliers. One of the tools in the previous pic also has a locking plier. It is branded "Bulit".<br />
<img src="http://i246.photobucket.com/albums/gg113/terry6540/1D89B21F-56D9-4EAF-B5C6-2D5924BF9839-633-000000A4A30A5622.jpg" alt="" class="img-markdown  img-fluid" /><br />
Next up are some coast tools and the endeavor tool with the one size fits many socket. I know there are some members here who do not like the endeavor tool. I like it. The knife is super sharp, pliers are strong, scissors work, and the socket has even removed the lugnuts from my tire.<br />
The smaller tools pictured are the cattleman's ranch hand. Many here call it the spyder guppie.<br />
<img src="http://i246.photobucket.com/albums/gg113/terry6540/3C754D42-90B0-4FAE-A435-6C809C2CF7A5-633-000000A4E52D2B2A.jpg" alt="" class="img-markdown  img-fluid" /><br />
Next we have a group of flip grip multitools. The two in the top left are flip grip brand, tools are identical on both except the bit driver. One holds a reversable bit and the other holds a few bits in the handle.<br />
The other models are cheaper brands. The sidecutters are not great but they are about the only sidecutters available on a multi and they do work. Plus you can flip them around for pliers :)<br />
<img src="http://i246.photobucket.com/albums/gg113/terry6540/D127B707-F15D-4CE9-A38E-77D607951D96-633-000000A4C5F4EA00.jpg" alt="" class="img-markdown  img-fluid" /><br />
The flip grip makes a nice long scredriver.<br />
<img src="http://i246.photobucket.com/albums/gg113/terry6540/8B507B30-4EBA-417F-A6D7-0FD24968ABA6-633-000000A4BB2DA025.jpg" alt="" class="img-markdown  img-fluid" /><br />
Next we have the CRKT Zilla Tools. I don't like either of these tools, however, I know there are some here who really like them. For me, the tools do not have enough features to be that helpful through out the day.<br />
Below the Zilla Tools is a Marbles fishing tool and a Myerchin tool. The Marbles tool is similar to some vintage multitools that have been around for more than 50 years.<br />
The Myerchin tool has a marlin spike on the handle and an oho knife. I like the blue aluminum handle. None of these tools have many features.<br />
<img src="http://i246.photobucket.com/albums/gg113/terry6540/5F5D9474-F969-4EA8-8259-7BC4F565067D-633-000000A4D9D0077A.jpg" alt="" class="img-markdown  img-fluid" /><br />
Now we are getting into some of the more expensive tools.<br />
The tool on the left is a vintage multitool for electrical work.<br />
The next tool is the AG Russel tool box. I believe this is the first modern fixed plier multitool.<br />
Next are two sog toolclips with different implements. There are plenty of threads on the forum if you want to learn more about them.<br />
Last is a group of mini toolclips. The top tool in black on the right side is made in Japan while the others are made in china with a lower level of quality. MultiMat recently posted a thread about the original mini toolclip if you are interested in learning more. It was avalable in several colors.<br />
<img src="http://i246.photobucket.com/albums/gg113/terry6540/FB4688E4-3D31-4393-AFDB-6215C6AAFDDD-633-000000A4ED4F3019.jpg" alt="" class="img-markdown  img-fluid" /><br />
Here are the Byrdrench and Spyderench. Quality on these tools is excellent. Unfortunately, I find the pliers are not very usefull because they are so stuby. The Spyderench made in Taiwan and older models made in the USA are better quality than the Byrdrench made in China.<br />
<img src="http://i246.photobucket.com/albums/gg113/terry6540/E2E5003B-05B7-4599-86CC-31A337C4533A-633-000000A4F4867805.jpg" alt="" class="img-markdown  img-fluid" /><br />
Here is the Al Mar 4x4 and Quick Clip. I believe the Quick Clip is the first multi to use an OHO blade and a pocket clip. They were decades ahead of the competition. There was another "fancy" model made. If you are interested in learning more about the Al Mar tools, there are several threads on the forum and the wiki.<br />
<img src="http://i246.photobucket.com/albums/gg113/terry6540/8696D0E9-FB27-4E9D-A2F6-155432B2F290-633-000000A516185A89.jpg" alt="" class="img-markdown  img-fluid" /><br />
Here are three tools made by Schrade and ViseGrip. There were two variations of each, but these are the three main models.<br />
<img src="http://i246.photobucket.com/albums/gg113/terry6540/A653C761-BE06-4E2D-A5A8-AFC34E2C92A4-633-000000A508D55614.jpg" alt="" class="img-markdown  img-fluid" /><br />
We have the Kershaw and Craftsman tools.<br />
<img src="http://i246.photobucket.com/albums/gg113/terry6540/A145FF8E-D63F-405C-A297-7A223145B67F-633-000000A4FE39D5F9.jpg" alt="" class="img-markdown  img-fluid" /><br />
Here are some variants of the Kutmaster MultiMaster. KutMaster is less know, so I will go into a little more detail here. In the picture is a WrenchHead, CAT tool, and Skil tool. All tools have: awl, serrated blade, file with chisel, spanner, and knife. The handle has cutouts for various sizes of nuts. The smaller handle opens to reveal screwdriver bits. The handle can be moved to a 90 degree angle in order to provide greater torque. The sheaths contain extra bits and in some cases, sockets. All tools are made in China. These tools were sold under several other names also (winchester).<br />
<img src="http://i246.photobucket.com/albums/gg113/terry6540/41955A9E-DFC6-4D89-9577-9EC8BABCB43B-633-000000A4B039D74D.jpg" alt="" class="img-markdown  img-fluid" /><br />
Here we have a few USA made MultiMasters.<br />
The tool on the left is a Klien Trip Saver. It is unique in that it has an awl and file with multiple wire strippers.<br />
The rest of the USA made tools (branded CAT, MultiMaster, no brand, and Leadership Trust) have the same tools. Can opener, serrated blade, saw, file, knife. The sheaths store store screwdriver bits for the tool.<br />
Only one of the USA made tools has the pivoting handle for a 90 degree scredriver and cutouts in the handle cover for nuts. My guess is that shortly after this model was developed, production moved over seas.<br />
Also, in the China Made tools the two plier halves are held together by a screw through the center of the plier pivot. Oddly, in the USA tools, only the CAT and Leadership tool have the screw through both haves of the plier/pivot.<br />
The other tools are actually just a nose on one side held in by two rivots while the other side of the plier is the nose and entire pivot. It seems to me the tools that share the pivot in both halves of the plier would be much stronger.<br />
One tool I don't have but would like to pick up someday is the browning version.<br />
<img src="http://i246.photobucket.com/albums/gg113/terry6540/FB388828-7CA6-4204-90BE-EFFAA11D44AD-633-000000A49B56E45F.jpg" alt="" class="img-markdown  img-fluid" /><br />
And perhaps the king of their category is the SwissGrip. The SwissGrip was sold with an optional bit kit that can be attached to one of the drivers, making a long screwdriver or the bits could be inserted into the tool handle for a 90 degree screwdriver. Both ways of using the optional bits are displayed on the red tool.<br />
The tool comes with a bottle opener/scredriver, file/metal saw, small scredriver, large knife, awl, and a superb saw. It also came with either a phillips driver or a corckscrew.<br />
The minigrip came in blunt and needle nose options. There was also a IronGrip version made.<br />
The last tool on the right is a swiss gear multi tool made in Taiwan. Construction is similar in quality to the zilla tool.<br />
<img src="http://i246.photobucket.com/albums/gg113/terry6540/9F198C02-A006-459D-821B-9FD39E144718-633-000000A490D0A9EC.jpg" alt="" class="img-markdown  img-fluid" /><br />
Feel free to add any other tools to the thread, add more detail about these tools, or ask questions.</p>
]]></description><link>https://multitool.ninja/topic/42372/fixed-plier-multi-tools</link><generator>RSS for Node</generator><lastBuildDate>Mon, 16 Nov 2026 16:29:23 GMT</lastBuildDate><atom:link href="https://multitool.ninja/topic/42372.rss" rel="self" type="application/rss+xml"/><pubDate>Mon, 21 Jan 2013 02:17:17 GMT</pubDate><ttl>60</ttl><item><title><![CDATA[Reply to Fixed Plier Multi-Tools on Mon, 25 Feb 2013 16:09:37 GMT]]></title><description><![CDATA[<p dir="auto">Hmmm ... see what you mean. Mine is out by about half that much I reckon. No issues on the slip joint transition on mine, but you have got to pretty much open it all the way for the slot to line up.</p>
]]></description><link>https://multitool.ninja/post/697079</link><guid isPermaLink="true">https://multitool.ninja/post/697079</guid><dc:creator><![CDATA[AimlessWanderer]]></dc:creator><pubDate>Mon, 25 Feb 2013 16:09:37 GMT</pubDate></item><item><title><![CDATA[Reply to Fixed Plier Multi-Tools on Mon, 25 Feb 2013 04:41:03 GMT]]></title><description><![CDATA[<p dir="auto">Thanks</p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/45577_IMG_20130224_211938.jpg" alt="IMG_20130224_211938.jpg" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/696897</link><guid isPermaLink="true">https://multitool.ninja/post/696897</guid><dc:creator><![CDATA[scrappy]]></dc:creator><pubDate>Mon, 25 Feb 2013 04:41:03 GMT</pubDate></item><item><title><![CDATA[Reply to Fixed Plier Multi-Tools on Mon, 25 Feb 2013 04:35:37 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto">@Grant Lamontagne <a href="/post/696835">said</a>:</p>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/scrappy" aria-label="Profile: scrappy">@<bdi>scrappy</bdi></a> <a href="/post/695723">said</a>:</p>
<blockquote>
<p dir="auto">Wow, that must be a hight speed knife!<br />
that is shame we didn't pick any of those tools up when you had them for sell.<br />
On another note. I recieved my Wichard multitool today. And I have never seen such a blatant QC problem. The plier heads do not line up. Similair to the sog tool clip I posted about on the forums before. But here is the worst part, the slip joing pliers can't be used because the pin holding the two plier halves together is wider than the slide it should go up and down in to move from the norrow opening to the wide opening. So it is always stuck in the narrow opening... I have owned a lot slip joint pliers but I have never heard of this.</p>
</blockquote>
<p dir="auto">That's awful.<br />
The Depanneur version I have is pretty well perfect.  I don't see how it could have been made any better.  I wonder if Witchard started cutting corners on the design after buying it?  I haven't seen a Witchard up close so I don't know what they are like, but that sounds bad.</p>
<p dir="auto">Def</p>
</blockquote>
<p dir="auto">Here is a picture of the misalignment. Not horrible but I paid 100 bucks for this tool! I originally paid 82 but then the store called and informed me they would not honor the coupon code I entered. So I had to pay full price.<br />
The worst part is the pin making the slip joint unusable. The Store has a good return policy and they are replacing the tool. I will let you know if the next tool is any better.</p>
]]></description><link>https://multitool.ninja/post/696896</link><guid isPermaLink="true">https://multitool.ninja/post/696896</guid><dc:creator><![CDATA[scrappy]]></dc:creator><pubDate>Mon, 25 Feb 2013 04:35:37 GMT</pubDate></item><item><title><![CDATA[Reply to Fixed Plier Multi-Tools on Mon, 25 Feb 2013 04:29:58 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/baja820" aria-label="Profile: baja820">@<bdi>baja820</bdi></a> <a href="/post/695799">said</a>:<br />
Just picked up this little channellock 424 as a companion to my surge.<br />
<img src="http://i671.photobucket.com/albums/vv78/baja820/2013-02-21_11-41-54_616_zps5d61d703.jpg" alt="" class="img-markdown  img-fluid" /></p>
</blockquote>
<p dir="auto">I like that small channell lock</p>
]]></description><link>https://multitool.ninja/post/696895</link><guid isPermaLink="true">https://multitool.ninja/post/696895</guid><dc:creator><![CDATA[scrappy]]></dc:creator><pubDate>Mon, 25 Feb 2013 04:29:58 GMT</pubDate></item><item><title><![CDATA[Reply to Fixed Plier Multi-Tools on Sun, 24 Feb 2013 23:40:04 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/scrappy" aria-label="Profile: scrappy">@<bdi>scrappy</bdi></a> <a href="/post/695723">said</a>:<br />
Wow, that must be a hight speed knife!<br />
that is shame we didn't pick any of those tools up when you had them for sell.<br />
On another note. I recieved my Wichard multitool today. And I have never seen such a blatant QC problem. The plier heads do not line up. Similair to the sog tool clip I posted about on the forums before. But here is the worst part, the slip joing pliers can't be used because the pin holding the two plier halves together is wider than the slide it should go up and down in to move from the norrow opening to the wide opening. So it is always stuck in the narrow opening... I have owned a lot slip joint pliers but I have never heard of this.</p>
</blockquote>
<p dir="auto">That's awful.  The Depanneur version I have is pretty well perfect.  I don't see how it could have been made any better.  I wonder if Witchard started cutting corners on the design after buying it?  I haven't seen a Witchard up close so I don't know what they are like, but that sounds bad.</p>
<p dir="auto">Def</p>
]]></description><link>https://multitool.ninja/post/696835</link><guid isPermaLink="true">https://multitool.ninja/post/696835</guid><dc:creator><![CDATA[Grant Lamontagne]]></dc:creator><pubDate>Sun, 24 Feb 2013 23:40:04 GMT</pubDate></item><item><title><![CDATA[Reply to Fixed Plier Multi-Tools on Fri, 22 Feb 2013 21:26:06 GMT]]></title><description><![CDATA[<p dir="auto">Just picked up this little channellock 424 as a companion to my surge.<br />
<img src="http://i671.photobucket.com/albums/vv78/baja820/2013-02-21_11-41-54_616_zps5d61d703.jpg" alt="" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/695799</link><guid isPermaLink="true">https://multitool.ninja/post/695799</guid><dc:creator><![CDATA[baja820]]></dc:creator><pubDate>Fri, 22 Feb 2013 21:26:06 GMT</pubDate></item><item><title><![CDATA[Reply to Fixed Plier Multi-Tools on Fri, 22 Feb 2013 18:45:43 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/scrappy" aria-label="Profile: scrappy">@<bdi>scrappy</bdi></a> <a href="/post/695723">said</a>:<br />
Wow, that must be a hight speed knife!<br />
that is shame we didn't pick any of those tools up when you had them for sell.<br />
On another note. I recieved my Wichard multitool today. And I have never seen such a blatant QC problem. The plier heads do not line up. Similair to the sog tool clip I posted about on the forums before. But here is the worst part, the slip joing pliers can't be used because the pin holding the two plier halves together is wider than the slide it should go up and down in to move from the norrow opening to the wide opening. So it is always stuck in the narrow opening... I have owned a lot slip joint pliers but I have never heard of this.</p>
</blockquote>
<p dir="auto"><img src="/assets/uploads/smileys/facepalm.gif" alt=":facepalm:" title="Facepalm" class="forum-smiley emoji" /> That's a real shame mate. The tips on my pliers are slightly misaligned, but nothing to get upset too about ... but that oversize pivot is a downer  :( Can you pop the nut off the back and open out the transition between the two holes slightly?</p>
]]></description><link>https://multitool.ninja/post/695732</link><guid isPermaLink="true">https://multitool.ninja/post/695732</guid><dc:creator><![CDATA[AimlessWanderer]]></dc:creator><pubDate>Fri, 22 Feb 2013 18:45:43 GMT</pubDate></item><item><title><![CDATA[Reply to Fixed Plier Multi-Tools on Fri, 22 Feb 2013 18:17:00 GMT]]></title><description><![CDATA[<p dir="auto">Wow, that must be a hight speed knife!<br />
that is shame we didn't pick any of those tools up when you had them for sell.<br />
On another note. I recieved my Wichard multitool today. And I have never seen such a blatant QC problem. The plier heads do not line up. Similair to the sog tool clip I posted about on the forums before. But here is the worst part, the slip joing pliers can't be used because the pin holding the two plier halves together is wider than the slide it should go up and down in to move from the norrow opening to the wide opening. So it is always stuck in the narrow opening... I have owned a lot slip joint pliers but I have never heard of this.</p>
]]></description><link>https://multitool.ninja/post/695723</link><guid isPermaLink="true">https://multitool.ninja/post/695723</guid><dc:creator><![CDATA[scrappy]]></dc:creator><pubDate>Fri, 22 Feb 2013 18:17:00 GMT</pubDate></item><item><title><![CDATA[Reply to Fixed Plier Multi-Tools on Fri, 22 Feb 2013 05:52:51 GMT]]></title><description><![CDATA[<p dir="auto"><img src="/assets/uploads/smileys/rofl.gif" alt=":rofl:" title="rofl" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/rofl.gif" alt=":rofl:" title="rofl" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/rofl.gif" alt=":rofl:" title="rofl" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/rofl.gif" alt=":rofl:" title="rofl" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/695458</link><guid isPermaLink="true">https://multitool.ninja/post/695458</guid><dc:creator><![CDATA[Ombudsman]]></dc:creator><pubDate>Fri, 22 Feb 2013 05:52:51 GMT</pubDate></item><item><title><![CDATA[Reply to Fixed Plier Multi-Tools on Fri, 22 Feb 2013 04:24:18 GMT]]></title><description><![CDATA[<p dir="auto">Pretty sure he means New, Old Stock <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /></p>
<blockquote>
<p dir="auto">@50ft-trad <a href="/post/695425">said</a>:<br />
It makes them cut faster  <img src="/assets/uploads/smileys/rofl.gif" alt=":rofl:" title="rofl" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">...although it also stands for Nitrous Oxide Systems :D</p>
<p dir="auto"><img src="http://i600.photobucket.com/albums/tt84/SVT-GT500/smileys/th_drag.gif" alt="" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/695427</link><guid isPermaLink="true">https://multitool.ninja/post/695427</guid><dc:creator><![CDATA[J-sews]]></dc:creator><pubDate>Fri, 22 Feb 2013 04:24:18 GMT</pubDate></item><item><title><![CDATA[Reply to Fixed Plier Multi-Tools on Fri, 22 Feb 2013 04:10:19 GMT]]></title><description><![CDATA[<p dir="auto">It makes them cut faster  <img src="/assets/uploads/smileys/rofl.gif" alt=":rofl:" title="rofl" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/695425</link><guid isPermaLink="true">https://multitool.ninja/post/695425</guid><dc:creator><![CDATA[AimlessWanderer]]></dc:creator><pubDate>Fri, 22 Feb 2013 04:10:19 GMT</pubDate></item><item><title><![CDATA[Reply to Fixed Plier Multi-Tools on Fri, 22 Feb 2013 03:55:14 GMT]]></title><description><![CDATA[<p dir="auto">What is NOS?</p>
]]></description><link>https://multitool.ninja/post/695418</link><guid isPermaLink="true">https://multitool.ninja/post/695418</guid><dc:creator><![CDATA[scrappy]]></dc:creator><pubDate>Fri, 22 Feb 2013 03:55:14 GMT</pubDate></item><item><title><![CDATA[Reply to Fixed Plier Multi-Tools on Fri, 22 Feb 2013 01:19:40 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/j-sews" aria-label="Profile: J-sews">@<bdi>J-sews</bdi></a> <a href="/post/694476">said</a>:</p>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/sazabi" aria-label="Profile: Sazabi">@<bdi>Sazabi</bdi></a> <a href="/post/693498">said</a>:</p>
<blockquote>
<p dir="auto">They had a model with a Marlin Spike and folding knife, and then one with a fixed blade.  <strong>I sold all nine of mine (all NIB) to a knife dealer a couple months ago for a song, since I couldn't find anyone who had interest in them.</strong> :/</p>
</blockquote>
<p dir="auto">You did <em><strong>WHAT?!</strong></em> :o</p>
</blockquote>
<p dir="auto">Think I even had them up for sale here a while back for a short period of time.  Had a whopping ~$35/each in them, maybe less. :/  Dunno if I still have any pictures of them at the moment.</p>
<p dir="auto">[Edit:  Hell, I still have a box of NOS real ivory-scaled AG Russell Baby Barlows, fifteen of those suckers. <em>shrugs</em>]</p>
]]></description><link>https://multitool.ninja/post/695344</link><guid isPermaLink="true">https://multitool.ninja/post/695344</guid><dc:creator><![CDATA[Sazabi]]></dc:creator><pubDate>Fri, 22 Feb 2013 01:19:40 GMT</pubDate></item><item><title><![CDATA[Reply to Fixed Plier Multi-Tools on Wed, 20 Feb 2013 04:31:14 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/sazabi" aria-label="Profile: Sazabi">@<bdi>Sazabi</bdi></a> <a href="/post/693498">said</a>:</p>
<p dir="auto">@Swiss Man <a href="/post/680992">said</a>:</p>
<blockquote>
<p dir="auto">HandyBoy belonged to my father he carried one while in Korea.</p>
<p dir="auto">Slip joint pliers, adjustable wrench<br />
screwdriver / pry bar.</p>
<p dir="auto">I saw a complete set once it came with a leather sheath with a fix blade and a marlin spike about 4 inches.</p>
<p dir="auto">DRAWER QUEEN NOW.<br />
<img src="http://img.tapatalk.com/d/13/01/25/ade9etyd.jpg" alt="" class="img-markdown  img-fluid" /></p>
</blockquote>
<p dir="auto">They had a model with a Marlin Spike and folding knife, and then one with a fixed blade.  I sold all nine of mine (all NIB) to a knife dealer a couple months ago for a song, since I couldn't find anyone who had interest in them. :/</p>
</blockquote>
<p dir="auto">Any pictures?</p>
]]></description><link>https://multitool.ninja/post/694483</link><guid isPermaLink="true">https://multitool.ninja/post/694483</guid><dc:creator><![CDATA[scrappy]]></dc:creator><pubDate>Wed, 20 Feb 2013 04:31:14 GMT</pubDate></item><item><title><![CDATA[Reply to Fixed Plier Multi-Tools on Wed, 20 Feb 2013 03:42:00 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/sazabi" aria-label="Profile: Sazabi">@<bdi>Sazabi</bdi></a> <a href="/post/693498">said</a>:<br />
They had a model with a Marlin Spike and folding knife, and then one with a fixed blade.  <strong>I sold all nine of mine (all NIB) to a knife dealer a couple months ago for a song, since I couldn't find anyone who had interest in them.</strong> :/</p>
</blockquote>
<p dir="auto">You did <em><strong>WHAT?!</strong></em> :o</p>
]]></description><link>https://multitool.ninja/post/694476</link><guid isPermaLink="true">https://multitool.ninja/post/694476</guid><dc:creator><![CDATA[J-sews]]></dc:creator><pubDate>Wed, 20 Feb 2013 03:42:00 GMT</pubDate></item><item><title><![CDATA[Reply to Fixed Plier Multi-Tools on Mon, 18 Feb 2013 03:28:26 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto">@Swiss Man <a href="/post/680992">said</a>:<br />
HandyBoy belonged to my father he carried one while in Korea.</p>
<p dir="auto">Slip joint pliers, adjustable wrench<br />
screwdriver / pry bar.</p>
<p dir="auto">I saw a complete set once it came with a leather sheath with a fix blade and a marlin spike about 4 inches.</p>
<p dir="auto">DRAWER QUEEN NOW.<br />
<img src="http://img.tapatalk.com/d/13/01/25/ade9etyd.jpg" alt="" class="img-markdown  img-fluid" /></p>
</blockquote>
<p dir="auto">They had a model with a Marlin Spike and folding knife, and then one with a fixed blade.  I sold all nine of mine (all NIB) to a knife dealer a couple months ago for a song, since I couldn't find anyone who had interest in them. :/</p>
]]></description><link>https://multitool.ninja/post/693498</link><guid isPermaLink="true">https://multitool.ninja/post/693498</guid><dc:creator><![CDATA[Sazabi]]></dc:creator><pubDate>Mon, 18 Feb 2013 03:28:26 GMT</pubDate></item><item><title><![CDATA[Reply to Fixed Plier Multi-Tools on Sat, 26 Jan 2013 18:14:06 GMT]]></title><description><![CDATA[<p dir="auto">I've never even seen a glow in the dark one in person!  Great find!</p>
<p dir="auto">Def</p>
]]></description><link>https://multitool.ninja/post/681856</link><guid isPermaLink="true">https://multitool.ninja/post/681856</guid><dc:creator><![CDATA[Grant Lamontagne]]></dc:creator><pubDate>Sat, 26 Jan 2013 18:14:06 GMT</pubDate></item><item><title><![CDATA[Reply to Fixed Plier Multi-Tools on Sat, 26 Jan 2013 18:02:12 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/scrappy" aria-label="Profile: scrappy">@<bdi>scrappy</bdi></a> <a href="/post/681785">said</a>:<br />
Swiss man<br />
That is an awesome tool!</p>
<p dir="auto">Bob<br />
**I got the glow in the dark one ** :)</p>
</blockquote>
<p dir="auto">CONGRATS!! <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/681852</link><guid isPermaLink="true">https://multitool.ninja/post/681852</guid><dc:creator><![CDATA[J-sews]]></dc:creator><pubDate>Sat, 26 Jan 2013 18:02:12 GMT</pubDate></item><item><title><![CDATA[Reply to Fixed Plier Multi-Tools on Sat, 26 Jan 2013 16:04:31 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto">@Grant Lamontagne <a href="/post/681749">said</a>:</p>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/scrappy" aria-label="Profile: scrappy">@<bdi>scrappy</bdi></a> <a href="/post/680071">said</a>:</p>
<blockquote>
<p dir="auto">Wow def, your tool has three slip joint positions. I bet it opens wide.<br />
Does the wichard tool have three positions?</p>
<p dir="auto">50ft-trad<br />
I found two retailers. One for 127 and the other for 97. I had a coupon and paid 82. Which is 49.2 pounds.</p>
</blockquote>
<p dir="auto">Yup, it's got a hell of a jaw on it.  I'll measure it when I get a moment, but I daresay it's capable of handling bolts much too large for bare hands to manage so I'm not sure it's really that useful if you get my drift.</p>
<blockquote>
<p dir="auto">@Swiss Man <a href="/post/681665">said</a>:<br />
Thanks. Every now and then I think about taking it out for a spin but decide against it.</p>
</blockquote>
<p dir="auto">Keep that sucker safe!  While you'd probably never break it, it would be a terrible shame to lose it or have it stolen.  That beautiful piece has earned a comfortable retirement.</p>
<p dir="auto">Def</p>
</blockquote>
<p dir="auto">Thanks def</p>
]]></description><link>https://multitool.ninja/post/681786</link><guid isPermaLink="true">https://multitool.ninja/post/681786</guid><dc:creator><![CDATA[scrappy]]></dc:creator><pubDate>Sat, 26 Jan 2013 16:04:31 GMT</pubDate></item><item><title><![CDATA[Reply to Fixed Plier Multi-Tools on Sat, 26 Jan 2013 16:03:00 GMT]]></title><description><![CDATA[<p dir="auto">Swiss man<br />
That is an awesome tool!</p>
<p dir="auto">Bob<br />
I got the glow in the dark one :)</p>
]]></description><link>https://multitool.ninja/post/681785</link><guid isPermaLink="true">https://multitool.ninja/post/681785</guid><dc:creator><![CDATA[scrappy]]></dc:creator><pubDate>Sat, 26 Jan 2013 16:03:00 GMT</pubDate></item><item><title><![CDATA[Reply to Fixed Plier Multi-Tools on Sat, 26 Jan 2013 15:13:08 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/scrappy" aria-label="Profile: scrappy">@<bdi>scrappy</bdi></a> <a href="/post/680071">said</a>:<br />
Wow def, your tool has three slip joint positions. I bet it opens wide.<br />
Does the wichard tool have three positions?</p>
<p dir="auto">50ft-trad<br />
I found two retailers. One for 127 and the other for 97. I had a coupon and paid 82. Which is 49.2 pounds.</p>
</blockquote>
<p dir="auto">Yup, it's got a hell of a jaw on it.  I'll measure it when I get a moment, but I daresay it's capable of handling bolts much too large for bare hands to manage so I'm not sure it's really that useful if you get my drift.</p>
<blockquote>
<p dir="auto">@Swiss Man <a href="/post/681665">said</a>:<br />
Thanks. Every now and then I think about taking it out for a spin but decide against it.</p>
</blockquote>
<p dir="auto">Keep that sucker safe!  While you'd probably never break it, it would be a terrible shame to lose it or have it stolen.  That beautiful piece has earned a comfortable retirement.</p>
<p dir="auto">Def</p>
]]></description><link>https://multitool.ninja/post/681749</link><guid isPermaLink="true">https://multitool.ninja/post/681749</guid><dc:creator><![CDATA[Grant Lamontagne]]></dc:creator><pubDate>Sat, 26 Jan 2013 15:13:08 GMT</pubDate></item><item><title><![CDATA[Reply to Fixed Plier Multi-Tools on Sat, 26 Jan 2013 12:37:50 GMT]]></title><description><![CDATA[<p dir="auto">Thanks. Every now and then I think about taking it out for a spin but decide against it.</p>
]]></description><link>https://multitool.ninja/post/681665</link><guid isPermaLink="true">https://multitool.ninja/post/681665</guid><dc:creator><![CDATA[Swiss Man]]></dc:creator><pubDate>Sat, 26 Jan 2013 12:37:50 GMT</pubDate></item><item><title><![CDATA[Reply to Fixed Plier Multi-Tools on Fri, 25 Jan 2013 01:25:39 GMT]]></title><description><![CDATA[<p dir="auto">That's an oldy and a goody Aaron! <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/681040</link><guid isPermaLink="true">https://multitool.ninja/post/681040</guid><dc:creator><![CDATA[J-sews]]></dc:creator><pubDate>Fri, 25 Jan 2013 01:25:39 GMT</pubDate></item><item><title><![CDATA[Reply to Fixed Plier Multi-Tools on Thu, 24 Jan 2013 23:11:33 GMT]]></title><description><![CDATA[<p dir="auto">HandyBoy belonged to my father he carried one while in Korea.</p>
<p dir="auto">Slip joint pliers, adjustable wrench<br />
screwdriver / pry bar.</p>
<p dir="auto">I saw a complete set once it came with a leather sheath with a fix blade and a marlin spike about 4 inches.</p>
<p dir="auto">DRAWER QUEEN NOW.<br />
<img src="http://img.tapatalk.com/d/13/01/25/ade9etyd.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://img.tapatalk.com/d/13/01/25/ydy9ynyh.jpg" alt="" class="img-markdown  img-fluid" /><img src="http://img.tapatalk.com/d/13/01/25/vypamada.jpg" alt="" class="img-markdown  img-fluid" /><img src="http://img.tapatalk.com/d/13/01/25/a7u5y8em.jpg" alt="" class="img-markdown  img-fluid" /><img src="http://img.tapatalk.com/d/13/01/25/e6u5yru7.jpg" alt="" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/680992</link><guid isPermaLink="true">https://multitool.ninja/post/680992</guid><dc:creator><![CDATA[Swiss Man]]></dc:creator><pubDate>Thu, 24 Jan 2013 23:11:33 GMT</pubDate></item></channel></rss>