<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0"><channel><title><![CDATA[First mod idea]]></title><description><![CDATA[<p dir="auto">So, I've been kicking the idea of doing a mod around in my head a little bit lately. Since it's something I'm very new to (and my tool selection isn't great), I've been thinking conservatively. Alox mods are right out for now until such a time as I build up experience. I also wanted to do something somewhat original and with that, here's what I've come up with: the advanced Mechanic.</p>
<p dir="auto">The donor knives would be a Spartan Lite and a Mechanic. Essentially, I would take the Mechanic pliers and add them to the Spartan Lite. As the Phillips head on the backside of the Mechanic would be redundant with the top side one, I would leave the Spartan's corkscrew and fit it with the eyeglass driver. Plus scales to wrap it up with. The Mechanic would then be converted to a Tinker to give me some practice assembling a finished knife. Any thoughts?</p>
]]></description><link>https://multitool.ninja/topic/42501/first-mod-idea</link><generator>RSS for Node</generator><lastBuildDate>Mon, 16 Nov 2026 16:20:57 GMT</lastBuildDate><atom:link href="https://multitool.ninja/topic/42501.rss" rel="self" type="application/rss+xml"/><pubDate>Fri, 25 Jan 2013 14:22:28 GMT</pubDate><ttl>60</ttl><item><title><![CDATA[Reply to First mod idea on Mon, 28 Jan 2013 00:40:49 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/jrp316" aria-label="Profile: jrp316">@<bdi>jrp316</bdi></a> <a href="/post/682050">said</a>:<br />
Either way, I'd better get down to brass tacks (or in this case, pins). Is Rotokid still the man to get the pin stock from these days?</p>
</blockquote>
<p dir="auto">He does still have pin stock last I talked to him, but has been slow to ship/respond lately.  I think he's busy.  I would recommend buying K&amp;S engineering brass rod stock.  Amazon and ebay both have it.</p>
<p dir="auto">I bought from ebay last time with no problem, but mostly because <a href="http://Amazon.com" rel="nofollow ugc">Amazon.com</a> wont ship to Canada.</p>
<p dir="auto">2.5 mm brass rod<br />
<a href="http://www.ebay.com/itm/390524273848?ssPageName=STRK:MEWNX:IT&amp;_trksid=p3984.m1439.l2649" rel="nofollow ugc">http://www.ebay.com/itm/390524273848?ssPageName=STRK:MEWNX:IT&amp;_trksid=p3984.m1439.l2649</a></p>
<p dir="auto">Noone makes the 2.2 mm that you need for the center pin, but it's such a small different from 2.5, I just put a small piece in a drill and hold sandpaper on it and keep test fitting it through a liner until it goes through.  Its not for the main end tools so honestly it really doesn't even have to be that super accurate.  So my recommendation is just to buy 2.5mm brass stock.</p>
<p dir="auto">Cheers,<br />
Robert</p>
]]></description><link>https://multitool.ninja/post/682746</link><guid isPermaLink="true">https://multitool.ninja/post/682746</guid><dc:creator><![CDATA[Syph007]]></dc:creator><pubDate>Mon, 28 Jan 2013 00:40:49 GMT</pubDate></item><item><title><![CDATA[Reply to First mod idea on Sun, 27 Jan 2013 22:40:32 GMT]]></title><description><![CDATA[<p dir="auto">Interesting idea, take photos when you start. <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /><br />
And as for the floor, lowtech is right.<br />
I had a hard time to find some tiny screws, when i was repairing a watch.<br />
<img src="http://www.smileyvault.com/albums/userpics/12109/smileyvault-cute-big-smiley-animated-009.gif" alt="" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/682671</link><guid isPermaLink="true">https://multitool.ninja/post/682671</guid><dc:creator><![CDATA[MARIOS7319]]></dc:creator><pubDate>Sun, 27 Jan 2013 22:40:32 GMT</pubDate></item><item><title><![CDATA[Reply to First mod idea on Sat, 26 Jan 2013 22:37:01 GMT]]></title><description><![CDATA[<p dir="auto">I'm kicking around a few different ideas in my mind; in particular, I'm going down the route of substituting a mag glass for the LED light (a la Explorer). For that, I'd have an Explorer as the base knife and a Mechanic to donate the pliers (eliminating the hook/scissors). Even though I'm not a fan, eliminate the openers layer and swap the small blade for a combo tool (Yeomechanic?).</p>
<p dir="auto">Either way, I'd better get down to brass tacks (or in this case, pins). Is Rotokid still the man to get the pin stock from these days?</p>
<p dir="auto">On another note, I tried my hand at knife disassembly with an old Tinker yesterday. The pin drilling went decently, but it was under more tension than I gave it credit for. As soon as the last pin head popped, the knife popped up off the bench even with tape holding it together (painter's tape, must use duct tape next time)...and I lost two bushings/pins as a result. So that one's put down as a lesson learned, but you can't make an omelet without breaking a few eggs, eh?  <img src="/assets/uploads/smileys/oops2.gif" alt=":oops:" title="oops" class="forum-smiley emoji" />  <img src="/assets/uploads/smileys/whistle.gif" alt=":whistle:" title="Whistle" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/682050</link><guid isPermaLink="true">https://multitool.ninja/post/682050</guid><dc:creator><![CDATA[jrp316]]></dc:creator><pubDate>Sat, 26 Jan 2013 22:37:01 GMT</pubDate></item><item><title><![CDATA[Reply to First mod idea on Sat, 26 Jan 2013 11:03:50 GMT]]></title><description><![CDATA[<p dir="auto">...and, if i may add, clean your workshop floor before dropping any bushings.</p>
<p dir="auto">I swiped a pile of metal shavings and oily dirt onto the dirt shovel, took a bright lamb,had a seat and picked through teh mess in search of 2 bushings i dropped.</p>
<p dir="auto">Should use a broom more often, i guess.</p>
]]></description><link>https://multitool.ninja/post/681631</link><guid isPermaLink="true">https://multitool.ninja/post/681631</guid><dc:creator><![CDATA[lowtech]]></dc:creator><pubDate>Sat, 26 Jan 2013 11:03:50 GMT</pubDate></item><item><title><![CDATA[Reply to First mod idea on Fri, 25 Jan 2013 23:55:36 GMT]]></title><description><![CDATA[<p dir="auto">Go ahead. And take pics whey you disassemble the layers so you know which backspring/liner goes where. Also be carefull not to damage or loose the bushings. When they fall on the ground it takes ages to find them. :ahhh</p>
<p dir="auto">If you have any questions along the way, members here are always happy to help. <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/681498</link><guid isPermaLink="true">https://multitool.ninja/post/681498</guid><dc:creator><![CDATA[enki_ck]]></dc:creator><pubDate>Fri, 25 Jan 2013 23:55:36 GMT</pubDate></item><item><title><![CDATA[Reply to First mod idea on Fri, 25 Jan 2013 20:30:09 GMT]]></title><description><![CDATA[<p dir="auto">sounds like a good plan too me, it will be wide with both light and pliers layers but that's not a big deal</p>
<p dir="auto">have you tried the lights before?  they aren't the most powerful, reducing their usefulness.</p>
<p dir="auto">igood luck<br />
have fun.</p>
]]></description><link>https://multitool.ninja/post/681381</link><guid isPermaLink="true">https://multitool.ninja/post/681381</guid><dc:creator><![CDATA[WiSAKfan]]></dc:creator><pubDate>Fri, 25 Jan 2013 20:30:09 GMT</pubDate></item><item><title><![CDATA[Reply to First mod idea on Fri, 25 Jan 2013 18:10:38 GMT]]></title><description><![CDATA[<p dir="auto">Sounds good to me. <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/681327</link><guid isPermaLink="true">https://multitool.ninja/post/681327</guid><dc:creator><![CDATA[Gareth]]></dc:creator><pubDate>Fri, 25 Jan 2013 18:10:38 GMT</pubDate></item><item><title><![CDATA[Reply to First mod idea on Fri, 25 Jan 2013 15:12:02 GMT]]></title><description><![CDATA[<p dir="auto">Sounds like a good idea!!  The mechanic to tinker mod will be relatively straight forward.  Lots of threads related to layer removal mods.   <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
<p dir="auto">Take lots of pics along the way and share your experience!!   <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/681236</link><guid isPermaLink="true">https://multitool.ninja/post/681236</guid><dc:creator><![CDATA[82brutus]]></dc:creator><pubDate>Fri, 25 Jan 2013 15:12:02 GMT</pubDate></item></channel></rss>