<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0"><channel><title><![CDATA[A. Wright & Son Senator, slipjoint knife]]></title><description><![CDATA[<p dir="auto">After some PMs with a Sheffield member I decided to get one of these:<br />
A <strong>3¼ - 2 Bolster – Senator Manufactured by A. Wright &amp; Son. Carbon steel.</strong></p>
<p dir="auto">Shop: <a href="http://www.sheffield-made.com/acatalog/3_-_2_Bolster_-_Senator.html" rel="nofollow ugc">http://www.sheffield-made.com/acatalog/3_-_2_Bolster_-_Senator.html</a></p>
<p dir="auto">The price was 57.50 pounds plus 3.50 shipping, bringing the total to 61 Pounds which is 71 Euro or 96 dollars. <em>So we are talking GEC money here.</em></p>
<p dir="auto">It arrived wrapped in a tissue, well protected.</p>
<p dir="auto"><img src="http://i1230.photobucket.com/albums/ee484/jladks/toys/1-IMG_4120.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="http://i1230.photobucket.com/albums/ee484/jladks/toys/2-IMG_4121.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="http://i1230.photobucket.com/albums/ee484/jladks/toys/7-IMG_4140.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">*Problems: *<br />
Grit that needed a good clean, the stag is a bit plain looking. <em>I requested popcorn style stag and asked them to check it well</em> before posting it. <strong>I assume they did not bother with either of my requests.</strong></p>
<p dir="auto">The **main problem ** for me is &lt;u&gt;how much off centre the blade is&lt;/u&gt;. It is not actually touching the sides, missing them by a fraction of a mm but it still is annoying when with all this supposedly great experience they are not able to centre a blade, on an expensive model.<br />
<img src="http://i1230.photobucket.com/albums/ee484/jladks/toys/4-IMG_4130.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="http://i1230.photobucket.com/albums/ee484/jladks/toys/5-IMG_4131.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Other minor issues are the fact that a pin on each side has a rough finish:</p>
<p dir="auto"><img src="http://i1230.photobucket.com/albums/ee484/jladks/toys/3-IMG_4127.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">and that the spring is not flush with the liners when the blade is closed.</p>
<p dir="auto"><img src="http://i1230.photobucket.com/albums/ee484/jladks/toys/6-IMG_4139.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><em>It is flush when the bade is open.</em></p>
<p dir="auto">The carving work on the spring is nice and the knife is also nicely polished (brass).<br />
The grinds are evenish and the knife is reasonably sharp though it will not push cut paper.<br />
The spring is a bit on the tight side but still reasonably easy to open.<br />
I am not unhappy, though <strong>I am disappointed by how little effort was put into centring the blade</strong>.</p>
<p dir="auto">My advice is to see the knife first yourself before buying it.</p>
<p dir="auto">Here are some comparison pictures with a slightly different style of European knife. This was selected by me and <em>shows the stag style I actually wanted</em>.</p>
<p dir="auto"><img src="http://i1230.photobucket.com/albums/ee484/jladks/toys/8-IMG_4142.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Filework</p>
<p dir="auto"><img src="http://i1230.photobucket.com/albums/ee484/jladks/toys/9-IMG_4144.jpg" alt="" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/topic/42792/a-wright-son-senator-slipjoint-knife</link><generator>RSS for Node</generator><lastBuildDate>Mon, 16 Nov 2026 00:31:37 GMT</lastBuildDate><atom:link href="https://multitool.ninja/topic/42792.rss" rel="self" type="application/rss+xml"/><pubDate>Mon, 04 Feb 2013 17:24:23 GMT</pubDate><ttl>60</ttl><item><title><![CDATA[Reply to A. Wright & Son Senator, slipjoint knife on Tue, 13 Feb 2018 12:04:57 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/dks" aria-label="Profile: dks">@<bdi>dks</bdi></a> <a href="/post/687289">said</a>:<br />
After some PMs with a Sheffield member I decided to get one of these:<br />
A <strong>3¼ - 2 Bolster – Senator Manufactured by A. Wright &amp; Son. Carbon steel.</strong></p>
<p dir="auto">Shop: <a href="http://www.sheffield-made.com/acatalog/3_-_2_Bolster_-_Senator.html" rel="nofollow ugc">http://www.sheffield-made.com/acatalog/3_-_2_Bolster_-_Senator.html</a></p>
<p dir="auto">The price was **57.50 **pounds plus 3.50 shipping, bringing the total to 61 Pounds which is 71 Euro or 96 dollars. <em>So we are talking GEC money here.</em></p>
</blockquote>
<p dir="auto">I checked the price again today, for fun., and <strong>it is now  78 Pounds</strong>.... the price has gone up by 20 pounds or 35.6% in 5 years   <img src="https://multitool.ninja/assets/plugins/nodebb-plugin-emoji/emoji/android/1f62e.png?v=b41cf6e2207" class="not-responsive emoji emoji-android emoji--open_mouth" style="height:1.4em;width:auto;vertical-align:middle" title=":o" alt="😮" /> <img src="https://multitool.ninja/assets/plugins/nodebb-plugin-emoji/emoji/android/1f62e.png?v=b41cf6e2207" class="not-responsive emoji emoji-android emoji--open_mouth" style="height:1.4em;width:auto;vertical-align:middle" title=":o" alt="😮" /></p>
]]></description><link>https://multitool.ninja/post/1636613</link><guid isPermaLink="true">https://multitool.ninja/post/1636613</guid><dc:creator><![CDATA[dks]]></dc:creator><pubDate>Tue, 13 Feb 2018 12:04:57 GMT</pubDate></item><item><title><![CDATA[Reply to A. Wright & Son Senator, slipjoint knife on Fri, 22 Feb 2013 05:40:33 GMT]]></title><description><![CDATA[<p dir="auto">Looks to be a reasonable solution D. Nice looking knives there <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/695450</link><guid isPermaLink="true">https://multitool.ninja/post/695450</guid><dc:creator><![CDATA[stealth007s]]></dc:creator><pubDate>Fri, 22 Feb 2013 05:40:33 GMT</pubDate></item><item><title><![CDATA[Reply to A. Wright & Son Senator, slipjoint knife on Fri, 22 Feb 2013 01:18:04 GMT]]></title><description><![CDATA[<p dir="auto">Glad to see you got sorted out mate - that snakewood one looks a beauty <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /> I'll let you return the stag one to the shop D, hopefully Paul will give it them back to sort out ... besides I'm chucking cash elsewhere at the mo  <img src="https://multitool.ninja/assets/plugins/nodebb-plugin-emoji/emoji/android/1f61b.png?v=b41cf6e2207" class="not-responsive emoji emoji-android emoji--stuck_out_tongue" style="height:1.4em;width:auto;vertical-align:middle" title=":P" alt="😛" /></p>
<p dir="auto">Here's my Senator after a couple of years occasional carry and use. Buffalo version with a very healthy apple fueled patina  <img src="https://multitool.ninja/assets/plugins/nodebb-plugin-emoji/emoji/android/1f604.png?v=b41cf6e2207" class="not-responsive emoji emoji-android emoji--smile" style="height:1.4em;width:auto;vertical-align:middle" title=":D" alt="😄" /></p>
<p dir="auto"><img src="http://i748.photobucket.com/albums/xx122/50ft-trad/IMG_5438_zpsa8f3fd29.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i748.photobucket.com/albums/xx122/50ft-trad/IMG_5436_zpse7d20206.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i748.photobucket.com/albums/xx122/50ft-trad/IMG_5435_zps33f7cebf.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i748.photobucket.com/albums/xx122/50ft-trad/IMG_5434_zpsab8882e6.jpg" alt="" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/695345</link><guid isPermaLink="true">https://multitool.ninja/post/695345</guid><dc:creator><![CDATA[AimlessWanderer]]></dc:creator><pubDate>Fri, 22 Feb 2013 01:18:04 GMT</pubDate></item><item><title><![CDATA[Reply to A. Wright & Son Senator, slipjoint knife on Thu, 21 Feb 2013 20:30:20 GMT]]></title><description><![CDATA[<p dir="auto">We had a discussion with the Sheffield shop owner and he said that there was not at the time a suitable replacement for my knife. Thus we agreed on a different knife, more expensive but discounted. I also ordered an extra knife from their cheaper range.</p>
<p dir="auto">These two arrived today:</p>
<p dir="auto"><img src="http://i1230.photobucket.com/albums/ee484/jladks/toys/16-IMG_4317.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">A Barlow and a Senator, both with wooden handles.</p>
<p dir="auto"><img src="http://i1230.photobucket.com/albums/ee484/jladks/toys/05-IMG_4299.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i1230.photobucket.com/albums/ee484/jladks/toys/04-IMG_4296.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">I requested checks on blade centring, finish, play, spring hardness and so on, and expected the best.<br />
In summation they are both fine, though the grind on the Barlow was unfinished with a noticeable and hard burr on one side that could have been removed easily if the sharpener spent an extra 20s on the knife. They both had some thick black oily residue in their pivots etc. though they both open smoothly with no grinding or unevenness in their movement. None is able to push-cut paper.</p>
<p dir="auto"><strong>First the Senator.</strong></p>
<p dir="auto">I was surprised to see it had a rounded body as it appeared squareish in the picture.</p>
<p dir="auto"><img src="http://i1230.photobucket.com/albums/ee484/jladks/toys/11-IMG_4273.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="http://i1230.photobucket.com/albums/ee484/jladks/toys/10-IMG_4272.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i1230.photobucket.com/albums/ee484/jladks/toys/11-IMG_4273.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">The wood seems similar to good dashboard wood. It looks nicely finished with very few and minor natural pits. There were no noticeable gaps and the metal was nicely polished.<br />
The blade was reasonably centred.</p>
<p dir="auto"><img src="http://i1230.photobucket.com/albums/ee484/jladks/toys/13-IMG_4278.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i1230.photobucket.com/albums/ee484/jladks/toys/12-IMG_4277.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">See the difference with my original Senator model:</p>
<p dir="auto"><img src="http://i1230.photobucket.com/albums/ee484/jladks/toys/14-IMG_4281.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">The blade is smaller than in the Stag model, but the body is the same size...? I have no idea why they could not fit the larger blade.</p>
<p dir="auto"><img src="http://i1230.photobucket.com/albums/ee484/jladks/toys/03-IMG_4255.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i1230.photobucket.com/albums/ee484/jladks/toys/04-IMG_4256.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="http://i1230.photobucket.com/albums/ee484/jladks/toys/06-IMG_4265.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="http://i1230.photobucket.com/albums/ee484/jladks/toys/08-IMG_4267.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="http://i1230.photobucket.com/albums/ee484/jladks/toys/07-IMG_4266.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Some comparison pictures:</p>
<p dir="auto"><img src="http://i1230.photobucket.com/albums/ee484/jladks/toys/15-IMG_4284.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://i1230.photobucket.com/albums/ee484/jladks/toys/16-IMG_4285.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">The kick was a bit strangely ground, but it works.</p>
<p dir="auto"><img src="http://i1230.photobucket.com/albums/ee484/jladks/toys/18-IMG_4323.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><strong>And now the Barlow:</strong></p>
<p dir="auto">This is sold as a working knife and is a quarter of the price of the Senator.  It has “Barlow” engraved with Gold leaf apparently.<br />
The finish is good, apart from the grinds. The blade is not polished but it is reasonably centred.</p>
<p dir="auto"><img src="http://i1230.photobucket.com/albums/ee484/jladks/toys/10-IMG_4307.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="http://i1230.photobucket.com/albums/ee484/jladks/toys/03-IMG_4294.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="http://i1230.photobucket.com/albums/ee484/jladks/toys/02-IMG_4293.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="http://i1230.photobucket.com/albums/ee484/jladks/toys/01-IMG_4291.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="http://i1230.photobucket.com/albums/ee484/jladks/toys/18-IMG_4290.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="http://i1230.photobucket.com/albums/ee484/jladks/toys/17-IMG_4289.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="http://i1230.photobucket.com/albums/ee484/jladks/toys/15-IMG_4313.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">It is a large size Barlow as seen in the comparison pictures with a Camillus Barlow:</p>
<p dir="auto"><img src="http://i1230.photobucket.com/albums/ee484/jladks/toys/07-IMG_4301.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="http://i1230.photobucket.com/albums/ee484/jladks/toys/08-IMG_4302.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="http://i1230.photobucket.com/albums/ee484/jladks/toys/09-IMG_4304.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">It does not stand up perfectly:</p>
<p dir="auto"><img src="http://i1230.photobucket.com/albums/ee484/jladks/toys/12-IMG_4310.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Family photo:</p>
<p dir="auto"><img src="http://i1230.photobucket.com/albums/ee484/jladks/toys/05-IMG_4264.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">The Stag Senator is going back on Monday (unless Al still wants to buy it..  :D)</p>
<p dir="auto">I was also sent a 20% discount code from that shop, which I assume they sent to all of their customers, but if anybody wants to use it PM me. I have had it for a few days but did not want to advertise it until I knew they could deliver a decent product.</p>
]]></description><link>https://multitool.ninja/post/695238</link><guid isPermaLink="true">https://multitool.ninja/post/695238</guid><dc:creator><![CDATA[dks]]></dc:creator><pubDate>Thu, 21 Feb 2013 20:30:20 GMT</pubDate></item><item><title><![CDATA[Reply to A. Wright & Son Senator, slipjoint knife on Tue, 05 Feb 2013 10:20:34 GMT]]></title><description><![CDATA[<p dir="auto">There are some further complications that we are trying to sort out now. I will keep you lot posted when we are finished.  <img src="https://multitool.ninja/assets/plugins/nodebb-plugin-emoji/emoji/android/1f604.png?v=b41cf6e2207" class="not-responsive emoji emoji-android emoji--smile" style="height:1.4em;width:auto;vertical-align:middle" title=":D" alt="😄" /></p>
]]></description><link>https://multitool.ninja/post/687599</link><guid isPermaLink="true">https://multitool.ninja/post/687599</guid><dc:creator><![CDATA[dks]]></dc:creator><pubDate>Tue, 05 Feb 2013 10:20:34 GMT</pubDate></item><item><title><![CDATA[Reply to A. Wright & Son Senator, slipjoint knife on Tue, 05 Feb 2013 10:18:27 GMT]]></title><description><![CDATA[<p dir="auto">Fair play to Paul on his e-mail.</p>
<p dir="auto">When you've screwed up - that's the kind of response you should be giving - an apology and a proposal on how you are going to put it right. Too often that's not the case these days.</p>
<p dir="auto">Let's hope they sort you out with a knife that's up to the same quality as the customer service - fingers crossed for you dks.</p>
]]></description><link>https://multitool.ninja/post/687598</link><guid isPermaLink="true">https://multitool.ninja/post/687598</guid><dc:creator><![CDATA[DaveK]]></dc:creator><pubDate>Tue, 05 Feb 2013 10:18:27 GMT</pubDate></item><item><title><![CDATA[Reply to A. Wright & Son Senator, slipjoint knife on Tue, 05 Feb 2013 09:37:59 GMT]]></title><description><![CDATA[<p dir="auto">Nah, not really. If it had been a £25 knife, I'd have said stop moaning  <img src="/assets/uploads/smileys/poke2.gif" alt=":pok:" title="pok" class="forum-smiley emoji" /> <img src="https://multitool.ninja/assets/plugins/nodebb-plugin-emoji/emoji/android/1f604.png?v=b41cf6e2207" class="not-responsive emoji emoji-android emoji--smile" style="height:1.4em;width:auto;vertical-align:middle" title=":D" alt="😄" /> For £57 you are quite right to expect better. I expected better and it's not cost me anything ... yet  <img src="https://multitool.ninja/assets/plugins/nodebb-plugin-emoji/emoji/android/1f61b.png?v=b41cf6e2207" class="not-responsive emoji emoji-android emoji--stuck_out_tongue" style="height:1.4em;width:auto;vertical-align:middle" title=":P" alt="😛" /> That centering is really poor, and should have been easy to avoid/remedy during fitting</p>
]]></description><link>https://multitool.ninja/post/687591</link><guid isPermaLink="true">https://multitool.ninja/post/687591</guid><dc:creator><![CDATA[AimlessWanderer]]></dc:creator><pubDate>Tue, 05 Feb 2013 09:37:59 GMT</pubDate></item><item><title><![CDATA[Reply to A. Wright & Son Senator, slipjoint knife on Tue, 05 Feb 2013 08:22:25 GMT]]></title><description><![CDATA[<p dir="auto">As I said my main complaint was the centring. I do not care too much about the grit, as I can clean it and the pins and spring issues on their own would not have bothered me much.<br />
Even the centring if it was *a bit off * it would not have been a problem but it just really hits you with the fact that it is so bad. I was complaining about a RR being off-centre a while back but I did not see it fit to return it as it was a $10 knife, not an $100 like the senator.</p>
<p dir="auto">Maybe I am just too picky..  <img src="/assets/uploads/smileys/facepalm.gif" alt=":facepalm:" title="Facepalm" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/687579</link><guid isPermaLink="true">https://multitool.ninja/post/687579</guid><dc:creator><![CDATA[dks]]></dc:creator><pubDate>Tue, 05 Feb 2013 08:22:25 GMT</pubDate></item><item><title><![CDATA[Reply to A. Wright & Son Senator, slipjoint knife on Tue, 05 Feb 2013 09:33:49 GMT]]></title><description><![CDATA[<p dir="auto">That's more promising  <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
<p dir="auto">Don't worry D, I know you didn't hold me responsible for the purchase, or for the knife industry at large  <img src="https://multitool.ninja/assets/plugins/nodebb-plugin-emoji/emoji/android/1f604.png?v=b41cf6e2207" class="not-responsive emoji emoji-android emoji--smile" style="height:1.4em;width:auto;vertical-align:middle" title=":D" alt="😄" /> No delusions of grandeur here  <img src="https://multitool.ninja/assets/plugins/nodebb-plugin-emoji/emoji/android/1f61b.png?v=b41cf6e2207" class="not-responsive emoji emoji-android emoji--stuck_out_tongue" style="height:1.4em;width:auto;vertical-align:middle" title=":P" alt="😛" /> I was just honouring the pledge I made to you <strong>before</strong> you bought it as recompense for not being able to go and hand pick one for you. I said back then I had confidence in those knives and if you weren't happy I'd buy it off you, and I was just sticking to my word. I might not be responsible for any knife and tool manufacture, but I am responsible for the advice I give my mates  <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /></p>
<p dir="auto">Paul Iseard is a good bloke and I've had a few nice things from his shop, and he's also aware of what knife collectors expect in their premium knives. As to the knife itself (now I'm using my office PC instead of the phone  <img src="https://multitool.ninja/assets/plugins/nodebb-plugin-emoji/emoji/android/1f604.png?v=b41cf6e2207" class="not-responsive emoji emoji-android emoji--smile" style="height:1.4em;width:auto;vertical-align:middle" title=":D" alt="😄" /> ) ...</p>
<p dir="auto">Stag ... luck of the draw with natural materials<br />
Spring ... if the tang is drilled 0.5mm off centre, the difference between how the spring sits open and closed will be 1mm<br />
Pins ... cut a fraction too long causing the pins to over peen and fracture is my guess. Hard to dress out without removing "character" from the stag<br />
Centreing ... Sloppy! That should have been crinked properly before leving the door<br />
Grit ... Sloppy again! Basic models, OK - maybe a little factory gunk, but not on premium models</p>
<p dir="auto">I'd expect a hand built/finished knife to have some variations - especially as it's not a several hundred pound model, but the crinking issue is sloppy as in the grit. I would (personally) have not fussed over either a slight pin or spring deviation, but wouldn't expect both, and that spring is further out than I'd expect to see.</p>
<p dir="auto">I hope it all comes right for you mate, but I'm still prepared to stand by my word if Mr Iseard doesn't make it right for you  <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/687577</link><guid isPermaLink="true">https://multitool.ninja/post/687577</guid><dc:creator><![CDATA[AimlessWanderer]]></dc:creator><pubDate>Tue, 05 Feb 2013 09:33:49 GMT</pubDate></item><item><title><![CDATA[Reply to A. Wright & Son Senator, slipjoint knife on Tue, 05 Feb 2013 07:47:35 GMT]]></title><description><![CDATA[<p dir="auto">I received this email from the shop today, following an enquiry I made through their website about their return/refund policy:</p>
<p dir="auto">"*Sorry the knife was not up to standard.  We can replace it or give you a refund.</p>
<p dir="auto">I would like to have the opportunity to replace it with a better one.  If you are happy to receive a replacement I will send you another of the same model. Before sending it I would of course subject it to a rigorous quality check. If you are happy with the replacement please send the original back.  If not, please send both back.  In either case I will refund the postage.</p>
<p dir="auto">A Wright and Son are a traditional pocket knife maker using hand skills rather than mass production engineering techniques. Their pocket knives are popular with farmers, gardeners etc because of their sturdiness and practical application. <strong>The premium knives need to meet stricter criteria in finish quality as well as functionality and I am regularly in touch with the owner on this very subject.</strong></p>
<p dir="auto">There will always be some variation in finish quality due to the way they are made and the use of natural materials.</p>
<p dir="auto">For the record, I receive many unsolicited emails from customers who are absolutely delighted with their purchase of an A Wright and Son pocket knife, so I do not want you to have the impression that they are sub-standard!</p>
<p dir="auto">Best wishes,<br />
Paul Iseard<br />
Owner<br />
The Famous Sheffield Shop*"</p>
<p dir="auto">I will ask for a replacement and see how it goes.<br />
<img src="https://multitool.ninja/assets/plugins/nodebb-plugin-emoji/emoji/android/1f642.png?v=b41cf6e2207" class="not-responsive emoji emoji-android emoji--slightly_smiling_face" style="height:1.4em;width:auto;vertical-align:middle" title=":)" alt="🙂" /></p>
]]></description><link>https://multitool.ninja/post/687573</link><guid isPermaLink="true">https://multitool.ninja/post/687573</guid><dc:creator><![CDATA[dks]]></dc:creator><pubDate>Tue, 05 Feb 2013 07:47:35 GMT</pubDate></item><item><title><![CDATA[Reply to A. Wright & Son Senator, slipjoint knife on Tue, 05 Feb 2013 06:13:55 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto">@50ft-trad <a href="/post/687374">said</a>:<br />
Well that's REALLY pissed me off. I was the guy who said this would be a safe bet based on my own experience with A Wrights. My senator is the same but with buffalo horn scales and none of these problems. Initially I was going to go and hand pick one to make sure this didn't happen. Because it was Wrights I figured it would be a safe bet and save demetris waiting for me to find the time to go over to Sheffield (time is tight at the month).</p>
<p dir="auto">Demitris, as I said before in an earlier PM, I will put my money where my mouth is and buy this off you at your full cost. You paid for this on my word and it's not right you not be happy with it. I'll also resume my earlier offer of going to hand pick something for you when time permits, but I honestly can't say when that will be right now. Send me your PP addy and full costs and I'll get the funds over tomorrowm</p>
</blockquote>
<p dir="auto">Do not worry Al, <strong>I know that you are in no way responsible for what I received</strong>, and so do not expect you to pay or make amends for their inconsistency. That will be very stupid on my behalf. <strong>You are not responsible for the Sheffield knife industry</strong>  <img src="https://multitool.ninja/assets/plugins/nodebb-plugin-emoji/emoji/android/1f604.png?v=b41cf6e2207" class="not-responsive emoji emoji-android emoji--smile" style="height:1.4em;width:auto;vertical-align:middle" title=":D" alt="😄" /> mate.</p>
<p dir="auto">I found it more amusing than anything that in our PMs <em>we sort of settled on what appeared to be a sure thing</em> which proved not to be so. When you order online it is always a gamble.</p>
<p dir="auto">I have contacted them too and I will see what they reply. Maybe they will say that this is fine by them. My main worry is that I may return it and receive something even worst back. <img src="https://multitool.ninja/assets/plugins/nodebb-plugin-emoji/emoji/android/1f61e.png?v=b41cf6e2207" class="not-responsive emoji emoji-android emoji--disappointed" style="height:1.4em;width:auto;vertical-align:middle" title=":(" alt="😞" /></p>
<p dir="auto">My advice is when you buy anything like that make sure you see it first.</p>
]]></description><link>https://multitool.ninja/post/687563</link><guid isPermaLink="true">https://multitool.ninja/post/687563</guid><dc:creator><![CDATA[dks]]></dc:creator><pubDate>Tue, 05 Feb 2013 06:13:55 GMT</pubDate></item><item><title><![CDATA[Reply to A. Wright & Son Senator, slipjoint knife on Tue, 05 Feb 2013 01:35:11 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto">@50ft-trad <a href="/post/687483">said</a>:<br />
Have you got a personal email for him, or did you use a link from their website?</p>
<p dir="auto">A cheapo rough rider will have better fit and finish</p>
</blockquote>
<p dir="auto">I was thinking exactly the same AL with regards to the Rough Riders.</p>
<p dir="auto">As for the email, I simply typed in A Wight &amp; Son's into the search bar and found this......</p>
<p dir="auto"><a href="http://www.penknives-and-scissors.co.uk/" rel="nofollow ugc">http://www.penknives-and-scissors.co.uk/</a></p>
]]></description><link>https://multitool.ninja/post/687503</link><guid isPermaLink="true">https://multitool.ninja/post/687503</guid><dc:creator><![CDATA[tosh]]></dc:creator><pubDate>Tue, 05 Feb 2013 01:35:11 GMT</pubDate></item><item><title><![CDATA[Reply to A. Wright & Son Senator, slipjoint knife on Tue, 05 Feb 2013 01:27:31 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/nuphoria" aria-label="Profile: nuphoria">@<bdi>nuphoria</bdi></a> <a href="/post/687480">said</a>:<br />
Would be good to see if they will fix it - no doubt they could if they wanted to.</p>
</blockquote>
<p dir="auto">Too right they could.</p>
<p dir="auto">The stupid thing is, as I say I live in Sheffield I'm acutely aware of Sheffield's past. Yet I cannot find a pocket knife anywhere to be proud off. We have shop called aptly "The Sheffield Shop" I called down a few years ago in the hope of picking up a heirloom for my young son. I didn't try them all - but yet all the one's I did try were appalling. Lateral blade movement, protruding rivits, badly fitted scales, blades not centered etc etc etc. Needless to say I walked out of the shop empty handed. My only hope now is to try to locate an authentic example off ebay, obviously not ebayuk as we cannot buy knives, so <a href="http://ebay.com" rel="nofollow ugc">ebay.com</a>...but then my bid is blocked too.</p>
<p dir="auto">I'd simply love a geniune George Wolstenholme or the likes, not one of the crappy replicas, but the real deal, infact I'd like two, both identical - one that's had a hard life and the other that's been left untouched.</p>
<p dir="auto">Ah yes!!...that would do!! <img src="/assets/uploads/smileys/drool.gif" alt=":drool:" title="drool" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/687499</link><guid isPermaLink="true">https://multitool.ninja/post/687499</guid><dc:creator><![CDATA[tosh]]></dc:creator><pubDate>Tue, 05 Feb 2013 01:27:31 GMT</pubDate></item><item><title><![CDATA[Reply to A. Wright & Son Senator, slipjoint knife on Tue, 05 Feb 2013 01:07:53 GMT]]></title><description><![CDATA[<p dir="auto">Have you got a personal email for him, or did you use a link from their website? The reason I aask is their website is actually run by the shop that dks bought it from as I understand it. Either way it'll be interesting to see what comes back ... If anything</p>
<p dir="auto">I have got my own thoughts on this knife which I've relayed to farmman regarding the how's and why's, but if I'd been making knives all my life I'd have more pride than that. Thaat build quality is perfectly adequate for an agricultural user - a basic model that's going to be used hard day in and day out, but not for a premier model. A cheapo rough rider will have better fit and finish, but I,d still put my money on the Sheffield knife outliving it in service ... However, a premier knife should have the rugged performance funtion AND the refined fit and finish ... Just like my buffalo version</p>
]]></description><link>https://multitool.ninja/post/687483</link><guid isPermaLink="true">https://multitool.ninja/post/687483</guid><dc:creator><![CDATA[AimlessWanderer]]></dc:creator><pubDate>Tue, 05 Feb 2013 01:07:53 GMT</pubDate></item><item><title><![CDATA[Reply to A. Wright & Son Senator, slipjoint knife on Tue, 05 Feb 2013 01:04:23 GMT]]></title><description><![CDATA[<p dir="auto">Would be good to see if they will fix it - no doubt they could if they wanted to.</p>
]]></description><link>https://multitool.ninja/post/687480</link><guid isPermaLink="true">https://multitool.ninja/post/687480</guid><dc:creator><![CDATA[nuphoria]]></dc:creator><pubDate>Tue, 05 Feb 2013 01:04:23 GMT</pubDate></item><item><title><![CDATA[Reply to A. Wright & Son Senator, slipjoint knife on Tue, 05 Feb 2013 00:53:09 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto">@50ft-trad <a href="/post/687374">said</a>:<br />
Well that's REALLY pissed me off. I was the guy who said this would be a safe bet based on my own experience with A Wrights. My senator is the same but with buffalo horn scales and none of these problems. Initially I was going to go and hand pick one to make sure this didn't happen. Because it was Wrights I figured it would be a safe bet and save demetris waiting for me to find the time to go over to Sheffield (time is tight at the month).</p>
<p dir="auto">Demitris, as I said before in an earlier PM, I will put my money where my mouth is and buy this off you at your full cost. You paid for this on my word and it's not right you not be happy with it. I'll also resume my earlier offer of going to hand pick something for you when time permits, but I honestly can't say when that will be right now. Send me your PP addy and full costs and I'll get the funds over tomorrowm</p>
</blockquote>
<p dir="auto">That is indeed a gracious gesture AL, alas echoed as you know by most yorkshire folk. Personally, I'd have done the same, except that I would have given Mr A Wright the link to this very thread so he can see for himself the shame he brings to Sheffield's cutlery heritage.<br />
If that's not you AL, then please allow me, as I certainly will!!</p>
<p dir="auto">&lt;u&gt;<strong>UPDATE</strong>&lt;/u&gt;</p>
<p dir="auto">As I live in Sheffield too, this kind of bad publicity is pretty damning to say the least when one considers that Sheffield really did lead the pack in past years.</p>
<p dir="auto">I've just forwarded the link to this thread to the maker A Wright &amp; Sons. If he replies, then I'll post it on here.</p>
]]></description><link>https://multitool.ninja/post/687459</link><guid isPermaLink="true">https://multitool.ninja/post/687459</guid><dc:creator><![CDATA[tosh]]></dc:creator><pubDate>Tue, 05 Feb 2013 00:53:09 GMT</pubDate></item><item><title><![CDATA[Reply to A. Wright & Son Senator, slipjoint knife on Mon, 04 Feb 2013 23:17:59 GMT]]></title><description><![CDATA[<p dir="auto">Very good of you Allan <img src="/assets/uploads/smileys/thumbsup.gif" alt=":2tu:" title="2 thumbs up" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/687432</link><guid isPermaLink="true">https://multitool.ninja/post/687432</guid><dc:creator><![CDATA[stealth007s]]></dc:creator><pubDate>Mon, 04 Feb 2013 23:17:59 GMT</pubDate></item><item><title><![CDATA[Reply to A. Wright & Son Senator, slipjoint knife on Mon, 04 Feb 2013 21:50:12 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto">@Northern Geek <a href="/post/687404">said</a>:</p>
<p dir="auto">@50ft-trad <a href="/post/687374">said</a>:</p>
<blockquote>
<p dir="auto">Well that's REALLY pissed me off. I was the guy who said this would be a safe bet based on my own experience with A Wrights. My senator is the same but with buffalo horn scales and none of these problems. Initially I was going to go and hand pick one to make sure this didn't happen. Because it was Wrights I figured it would be a safe bet and save demetris waiting for me to find the time to go over to Sheffield (time is tight at the month).</p>
<p dir="auto">Demitris, as I said before in an earlier PM, I will put my money where my mouth is and buy this off you at your full cost. You paid for this on my word and it's not right you not be happy with it. I'll also resume my earlier offer of going to hand pick something for you when time permits, but I honestly can't say when that will be right now. Send me your PP addy and full costs and I'll get the funds over tomorrowm</p>
</blockquote>
<p dir="auto">That's class right there. <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">+1  <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/687405</link><guid isPermaLink="true">https://multitool.ninja/post/687405</guid><dc:creator><![CDATA[sawman]]></dc:creator><pubDate>Mon, 04 Feb 2013 21:50:12 GMT</pubDate></item><item><title><![CDATA[Reply to A. Wright & Son Senator, slipjoint knife on Mon, 04 Feb 2013 21:42:36 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto">@50ft-trad <a href="/post/687374">said</a>:<br />
Well that's REALLY pissed me off. I was the guy who said this would be a safe bet based on my own experience with A Wrights. My senator is the same but with buffalo horn scales and none of these problems. Initially I was going to go and hand pick one to make sure this didn't happen. Because it was Wrights I figured it would be a safe bet and save demetris waiting for me to find the time to go over to Sheffield (time is tight at the month).</p>
<p dir="auto">Demitris, as I said before in an earlier PM, I will put my money where my mouth is and buy this off you at your full cost. You paid for this on my word and it's not right you not be happy with it. I'll also resume my earlier offer of going to hand pick something for you when time permits, but I honestly can't say when that will be right now. Send me your PP addy and full costs and I'll get the funds over tomorrowm</p>
</blockquote>
<p dir="auto">That's class right there. <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/687404</link><guid isPermaLink="true">https://multitool.ninja/post/687404</guid><dc:creator><![CDATA[Northern Geek]]></dc:creator><pubDate>Mon, 04 Feb 2013 21:42:36 GMT</pubDate></item><item><title><![CDATA[Reply to A. Wright & Son Senator, slipjoint knife on Mon, 04 Feb 2013 20:47:56 GMT]]></title><description><![CDATA[<p dir="auto">Well that's REALLY pissed me off. I was the guy who said this would be a safe bet based on my own experience with A Wrights. My senator is the same but with buffalo horn scales and none of these problems. Initially I was going to go and hand pick one to make sure this didn't happen. Because it was Wrights I figured it would be a safe bet and save demetris waiting for me to find the time to go over to Sheffield (time is tight at the month).</p>
<p dir="auto">Demitris, as I said before in an earlier PM, I will put my money where my mouth is and buy this off you at your full cost. You paid for this on my word and it's not right you not be happy with it. I'll also resume my earlier offer of going to hand pick something for you when time permits, but I honestly can't say when that will be right now. Send me your PP addy and full costs and I'll get the funds over tomorrowm</p>
]]></description><link>https://multitool.ninja/post/687374</link><guid isPermaLink="true">https://multitool.ninja/post/687374</guid><dc:creator><![CDATA[AimlessWanderer]]></dc:creator><pubDate>Mon, 04 Feb 2013 20:47:56 GMT</pubDate></item><item><title><![CDATA[Reply to A. Wright & Son Senator, slipjoint knife on Mon, 04 Feb 2013 17:56:12 GMT]]></title><description><![CDATA[<p dir="auto">My advisor  <img src="https://multitool.ninja/assets/plugins/nodebb-plugin-emoji/emoji/android/1f604.png?v=b41cf6e2207" class="not-responsive emoji emoji-android emoji--smile" style="height:1.4em;width:auto;vertical-align:middle" title=":D" alt="😄" /> assured me the knife will be OK (We know who he is...) as this was their expensive range, so I was not expecting to have the problems you had.</p>
<p dir="auto">The only thing that really bothers me is the blade centring. I know functionally the knife is fine but I have stopped buying knives just for function a long time ago.  <img src="https://multitool.ninja/assets/plugins/nodebb-plugin-emoji/emoji/android/1f604.png?v=b41cf6e2207" class="not-responsive emoji emoji-android emoji--smile" style="height:1.4em;width:auto;vertical-align:middle" title=":D" alt="😄" /></p>
<p dir="auto">I did ask them to check it and I do not think they sell that many every day that they could not have spent a minute to look at mine. They seem to be selling on their past reputation with no care about the future.<br />
I am generally lazy with returning products but you never know. If it bothers me enough maybe I will consider sending it back, though I may get something even worst in return  ::)</p>
]]></description><link>https://multitool.ninja/post/687302</link><guid isPermaLink="true">https://multitool.ninja/post/687302</guid><dc:creator><![CDATA[dks]]></dc:creator><pubDate>Mon, 04 Feb 2013 17:56:12 GMT</pubDate></item><item><title><![CDATA[Reply to A. Wright & Son Senator, slipjoint knife on Mon, 04 Feb 2013 17:36:05 GMT]]></title><description><![CDATA[<p dir="auto">I'd be fairly miffed with that fit and finish, and probably send it back for a refund.<br />
For GEC money, as you pointed out, it should be a lot better.</p>
<p dir="auto">Sadly there appears to be a fairly random QC issue in Sheffield, which is a shame because the area had a wonderful reputation for very good reason. I had a real doozy from there myself, similar problems and total hubris when I dared ask for more! ::)</p>
]]></description><link>https://multitool.ninja/post/687296</link><guid isPermaLink="true">https://multitool.ninja/post/687296</guid><dc:creator><![CDATA[nuphoria]]></dc:creator><pubDate>Mon, 04 Feb 2013 17:36:05 GMT</pubDate></item></channel></rss>