<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0"><channel><title><![CDATA[New Guy - My Mods]]></title><description><![CDATA[<p dir="auto">Hello all. Here are the two mods I've made.</p>
<p dir="auto">The first is my LM Charge Tti mod. I replaced the saw with 91mm Victorinox scissors (inspired by a post I saw on these boards) and I replaced the original scissors with a home made awl, ground from the LM Kick large screwdriver.</p>
<p dir="auto">The second is my LM Fuse mod. I ground off the company logo of the previous owner, replaced the lanyard ring with an awl made from the LM Kick small screwdriver. I also sandpapered the plastic grips to make it feel a little bit more comfortable.</p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/50117_Charge%20Mod.jpg" alt="Charge Mod.jpg" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/50119_Fuse%20Mod.jpg" alt="Fuse Mod.jpg" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/topic/44843/new-guy-my-mods</link><generator>RSS for Node</generator><lastBuildDate>Thu, 19 Nov 2026 20:36:31 GMT</lastBuildDate><atom:link href="https://multitool.ninja/topic/44843.rss" rel="self" type="application/rss+xml"/><pubDate>Wed, 08 May 2013 00:28:12 GMT</pubDate><ttl>60</ttl><item><title><![CDATA[Reply to New Guy - My Mods on Wed, 08 May 2013 22:46:02 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/enki-ck" aria-label="Profile: enki_ck">@<bdi>enki_ck</bdi></a> <a href="/post/726046">said</a>:<br />
inside the handles there is a piece of steel riveted that is pushed out to lock the blades from opening once the pliers are deployed. At the bottom of it, next to the rivet there is a tab sticking out. I think I remember reading that had to be broken off to allow for the Rebar/ST300 pliers to fit.</p>
</blockquote>
<p dir="auto">Ah, I see what you mean now.  :)</p>
<p dir="auto">breaking off that tab is only necessary if you're putting ST300 pliers into a Surge.  the Rebar pliers play nicely with the tabs inside the Wave/Charge handles.  <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
<p dir="auto">that being said, occasionally there is an issue with the pin sticking out too far and not allowing the blades to open even when the tool is completely closed.  I have had to grind down a those pins ever so slightly on a couple mods, but I've had others where the pins worked perfectly with the Rebar plier head in place.</p>
]]></description><link>https://multitool.ninja/post/726050</link><guid isPermaLink="true">https://multitool.ninja/post/726050</guid><dc:creator><![CDATA[Breezy12]]></dc:creator><pubDate>Wed, 08 May 2013 22:46:02 GMT</pubDate></item><item><title><![CDATA[Reply to New Guy - My Mods on Wed, 08 May 2013 22:30:31 GMT]]></title><description><![CDATA[<p dir="auto">inside the handles there is a piece of steel riveted that is pushed out to lock the blades from opening once the pliers are deployed. At the bottom of it, next to the rivet there is a tab sticking out. I think I remember reading that had to be broken off to allow for the Rebar/ST300 pliers to fit.</p>
]]></description><link>https://multitool.ninja/post/726046</link><guid isPermaLink="true">https://multitool.ninja/post/726046</guid><dc:creator><![CDATA[enki_ck]]></dc:creator><pubDate>Wed, 08 May 2013 22:30:31 GMT</pubDate></item><item><title><![CDATA[Reply to New Guy - My Mods on Wed, 08 May 2013 22:23:07 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/enki-ck" aria-label="Profile: enki_ck">@<bdi>enki_ck</bdi></a> <a href="/post/726037">said</a>:<br />
What about the locking tabs? Won't they get in the way when closing the pliers?</p>
</blockquote>
<p dir="auto">not sure what you mean, enki... which locking tabs are you referring to?</p>
]]></description><link>https://multitool.ninja/post/726044</link><guid isPermaLink="true">https://multitool.ninja/post/726044</guid><dc:creator><![CDATA[Breezy12]]></dc:creator><pubDate>Wed, 08 May 2013 22:23:07 GMT</pubDate></item><item><title><![CDATA[Reply to New Guy - My Mods on Wed, 08 May 2013 22:03:43 GMT]]></title><description><![CDATA[<p dir="auto">What about the locking tabs? Won't they get in the way when closing the pliers?</p>
]]></description><link>https://multitool.ninja/post/726037</link><guid isPermaLink="true">https://multitool.ninja/post/726037</guid><dc:creator><![CDATA[enki_ck]]></dc:creator><pubDate>Wed, 08 May 2013 22:03:43 GMT</pubDate></item><item><title><![CDATA[Reply to New Guy - My Mods on Wed, 08 May 2013 21:42:15 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto">@Halligan Man <a href="/post/725961">said</a>:<br />
Thanks for the replies, all!</p>
<p dir="auto">Hmmm... Rebar head. It has replaceable wire cutters and is a little more beefy, correct? Does it fit just as well, or do I have to make any other adjustments?</p>
</blockquote>
<p dir="auto">Yes, the Rebar plier head has replaceable wire cutters that are made of 154CM steel, and I think "a little more beefy" is an accurate description.  :)</p>
<p dir="auto">like Delta said, with the tool layout shown in your picture, the plier swap should just be a drop-in.  I don't think any other modification will be needed.</p>
]]></description><link>https://multitool.ninja/post/726032</link><guid isPermaLink="true">https://multitool.ninja/post/726032</guid><dc:creator><![CDATA[Breezy12]]></dc:creator><pubDate>Wed, 08 May 2013 21:42:15 GMT</pubDate></item><item><title><![CDATA[Reply to New Guy - My Mods on Wed, 08 May 2013 19:29:36 GMT]]></title><description><![CDATA[<p dir="auto">Since you already took out the scissors, it should be a relatively simple mod. Breezy dropped one right into an Charge XTi a while back with no other modification. The only thing I'm not sure about is the awl. However, since it looks like it was made from one of the flat drivers, it should be fine.</p>
<p dir="auto">Long story short, it looks like it should just be a drop in mod on your Charge.  <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
<p dir="auto">Mods look great, I like the SAK scissors. Might have to look into something similar on mine.</p>
<p dir="auto"><img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/725989</link><guid isPermaLink="true">https://multitool.ninja/post/725989</guid><dc:creator><![CDATA[Delta10]]></dc:creator><pubDate>Wed, 08 May 2013 19:29:36 GMT</pubDate></item><item><title><![CDATA[Reply to New Guy - My Mods on Wed, 08 May 2013 18:14:01 GMT]]></title><description><![CDATA[<p dir="auto">Thanks for the replies, all!</p>
<p dir="auto">Hmmm... Rebar head. It has replaceable wire cutters and is a little more beefy, correct? Does it fit just as well, or do I have to make any other adjustments?</p>
]]></description><link>https://multitool.ninja/post/725961</link><guid isPermaLink="true">https://multitool.ninja/post/725961</guid><dc:creator><![CDATA[Halligan Man]]></dc:creator><pubDate>Wed, 08 May 2013 18:14:01 GMT</pubDate></item><item><title><![CDATA[Reply to New Guy - My Mods on Wed, 08 May 2013 17:49:00 GMT]]></title><description><![CDATA[<p dir="auto">Very nice mods:))</p>
<p dir="auto">Sent from my SAMSUNG-SGH-I747 using Tapatalk 2</p>
]]></description><link>https://multitool.ninja/post/725945</link><guid isPermaLink="true">https://multitool.ninja/post/725945</guid><dc:creator><![CDATA[Hypnos3510]]></dc:creator><pubDate>Wed, 08 May 2013 17:49:00 GMT</pubDate></item><item><title><![CDATA[Reply to New Guy - My Mods on Wed, 08 May 2013 17:17:34 GMT]]></title><description><![CDATA[<p dir="auto">very nice work!  <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" />  although I'm surprised you haven't received any suggestions yet to swap the TTi plier head for a Rebar plier head... so in that case, allow me to be the first.  :D</p>
<p dir="auto">your Fuse looks nice too.  I have a kick with a broken small flat driver, but I think there's enough of it left to make an awl similar to yours... might have to give that a shot!</p>
]]></description><link>https://multitool.ninja/post/725930</link><guid isPermaLink="true">https://multitool.ninja/post/725930</guid><dc:creator><![CDATA[Breezy12]]></dc:creator><pubDate>Wed, 08 May 2013 17:17:34 GMT</pubDate></item><item><title><![CDATA[Reply to New Guy - My Mods on Wed, 08 May 2013 13:55:18 GMT]]></title><description><![CDATA[<p dir="auto">Nice ideas.... might have to attack my Fuse with the sandpaper now &gt;:D</p>
]]></description><link>https://multitool.ninja/post/725876</link><guid isPermaLink="true">https://multitool.ninja/post/725876</guid><dc:creator><![CDATA[nuphoria]]></dc:creator><pubDate>Wed, 08 May 2013 13:55:18 GMT</pubDate></item><item><title><![CDATA[Reply to New Guy - My Mods on Wed, 08 May 2013 11:54:33 GMT]]></title><description><![CDATA[<p dir="auto">I like the idea of replacing the lanyard ring with an awl. <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/725846</link><guid isPermaLink="true">https://multitool.ninja/post/725846</guid><dc:creator><![CDATA[enki_ck]]></dc:creator><pubDate>Wed, 08 May 2013 11:54:33 GMT</pubDate></item><item><title><![CDATA[Reply to New Guy - My Mods on Wed, 08 May 2013 03:12:42 GMT]]></title><description><![CDATA[<p dir="auto">Nice work there <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/725761</link><guid isPermaLink="true">https://multitool.ninja/post/725761</guid><dc:creator><![CDATA[stealth007s]]></dc:creator><pubDate>Wed, 08 May 2013 03:12:42 GMT</pubDate></item><item><title><![CDATA[Reply to New Guy - My Mods on Wed, 08 May 2013 02:55:09 GMT]]></title><description><![CDATA[<p dir="auto">GREAT work mate  8), thanks for sharing  <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /></p>
<p dir="auto">I do like Vic's scissors BUT the spring on them  <img src="/assets/uploads/smileys/pull_out_hair.gif" alt=":poh:" title="pull out hair" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/pull_out_hair.gif" alt=":poh:" title="pull out hair" class="forum-smiley emoji" /> , I wish they had a more sturdy spring  <img src="/assets/uploads/smileys/gimme.gif" alt=":gimme:" title="gimme" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/725753</link><guid isPermaLink="true">https://multitool.ninja/post/725753</guid><dc:creator><![CDATA[MultiMat]]></dc:creator><pubDate>Wed, 08 May 2013 02:55:09 GMT</pubDate></item><item><title><![CDATA[Reply to New Guy - My Mods on Wed, 08 May 2013 02:05:24 GMT]]></title><description><![CDATA[<p dir="auto">+1 on sanding down the zytel on the fuse. Used a fuse pretty heavy today and the edges  of the grips found themselves well in my hand. <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/725743</link><guid isPermaLink="true">https://multitool.ninja/post/725743</guid><dc:creator><![CDATA[Bensasupertool]]></dc:creator><pubDate>Wed, 08 May 2013 02:05:24 GMT</pubDate></item></channel></rss>