<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0"><channel><title><![CDATA[Key chain Drivers DIY]]></title><description><![CDATA[<p dir="auto">Keychain Drivers</p>
<p dir="auto"><img src="http://i1250.photobucket.com/albums/hh525/djjonny1/KCDriver01.jpg" alt="" class="img-markdown  img-fluid" /><br />
I've been asked about my keychain drivers a few times on edcf and asked for a DIY from my last carry pic here, so decided to pull my DIY from edcf here.<br />
They're cheap to make and don't take long</p>
<p dir="auto"><img src="http://i1250.photobucket.com/albums/hh525/djjonny1/KCDriver02.jpg" alt="" class="img-markdown  img-fluid" /><br />
You will need:</p>
<ul>
<li>Pratley Steel Putty (epoxy in putty form) from the hardware store. You can use normal epoxy but take's longer</li>
<li>The Cover of a damaged Audio Jack. If you carry Brass or gold items, you can get gold plated one's from the electronics store<br />
<img src="http://imageshack.us/a/img268/1213/lanyardz.jpg" alt="" class="img-markdown  img-fluid" /></li>
<li>A small piece of of paracord, a small keyring and most nb the driver bit you want</li>
</ul>
<p dir="auto"><img src="http://i1250.photobucket.com/albums/hh525/djjonny1/KCDriver03.jpg" alt="" class="img-markdown  img-fluid" /><br />
Start by tying a knot on the piece of paracord and pull it through the jack cover.<br />
You may need to twist the knot to get it past the threaded section</p>
<p dir="auto"><img src="http://i1250.photobucket.com/albums/hh525/djjonny1/KCDriver04.jpg" alt="" class="img-markdown  img-fluid" /><br />
Cut 2 small pieces of the epoxy putty, mix like normal and stuff it in the audio jack</p>
<p dir="auto"><img src="http://i1250.photobucket.com/albums/hh525/djjonny1/KCDriver05.jpg" alt="" class="img-markdown  img-fluid" /></p>
<ul>
<li>Shove the bit in the epoxy, center as best as possible and press the epoxy against the bit and jack cover</li>
<li>(To neaten the epoxy) Push the bit into a bit hole in any pocket tool, roll on a hard surface then dip your finger in water and smooth the edges<br />
Repeat until satisfied<br />
-Clean the excess epoxy off the jack cover</li>
</ul>
<p dir="auto"><img src="http://i1250.photobucket.com/albums/hh525/djjonny1/KCDriver06.jpg" alt="" class="img-markdown  img-fluid" /><br />
To touch up put any decoration you want on the paracord. I just used a piece of spring from the Audio jack mentioned before.<br />
Lastly attach a small keyring or metal ring on the paracord to put the tool on a keychain.</p>
<p dir="auto"><img src="http://i1250.photobucket.com/albums/hh525/djjonny1/KCDriver07.jpg" alt="" class="img-markdown  img-fluid" /><br />
After about 12 hours or so the tool will be ready for use. I wait 24 hours to be safe</p>
]]></description><link>https://multitool.ninja/topic/46699/key-chain-drivers-diy</link><generator>RSS for Node</generator><lastBuildDate>Thu, 19 Nov 2026 21:04:39 GMT</lastBuildDate><atom:link href="https://multitool.ninja/topic/46699.rss" rel="self" type="application/rss+xml"/><pubDate>Wed, 14 Aug 2013 06:01:57 GMT</pubDate><ttl>60</ttl><item><title><![CDATA[Reply to Key chain Drivers DIY on Tue, 03 Sep 2013 07:44:27 GMT]]></title><description><![CDATA[<p dir="auto">Thanks guys.  <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /> :tu .</p>
<p dir="auto">It started with Detron's mod. Did the same but coated the back of the bit with oil and pulled it out the epoxy<br />
Worked well but I could see the epoxy would not last. (bit got wedged after 1st hard use)</p>
<p dir="auto">That's when I decide to try the bit holder above:)</p>
<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/comis" aria-label="Profile: comis">@<bdi>comis</bdi></a> <a href="/post/769910">said</a>:<br />
Very nice mod, I like the latest design even better than the first!  Thanks to this, I now know what to do with wasted audio jacks in the future.  :D <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">Thanks!:D<br />
That's how I started. I use to do sound Engineering and built a collection from repairs</p>
]]></description><link>https://multitool.ninja/post/770488</link><guid isPermaLink="true">https://multitool.ninja/post/770488</guid><dc:creator><![CDATA[jph0200]]></dc:creator><pubDate>Tue, 03 Sep 2013 07:44:27 GMT</pubDate></item><item><title><![CDATA[Reply to Key chain Drivers DIY on Sun, 01 Sep 2013 14:22:37 GMT]]></title><description><![CDATA[<p dir="auto">Very nice mod, I like the latest design even better than the first!  Thanks to this, I now know what to do with wasted audio jacks in the future.  :D <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/769910</link><guid isPermaLink="true">https://multitool.ninja/post/769910</guid><dc:creator><![CDATA[comis]]></dc:creator><pubDate>Sun, 01 Sep 2013 14:22:37 GMT</pubDate></item><item><title><![CDATA[Reply to Key chain Drivers DIY on Sun, 01 Sep 2013 11:57:32 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/enki-ck" aria-label="Profile: enki_ck">@<bdi>enki_ck</bdi></a> <a href="/post/769343">said</a>:<br />
<img src="/assets/uploads/smileys/multitool.gif" alt=":multi:" title="multi" class="forum-smiley emoji" /></p>
<p dir="auto">I love following the progression of this mods. Clever thinking going on around here. <img src="/assets/uploads/smileys/hatsoff.gif" alt=":hatsoff:" title="Hats Off" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">agreed. <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/769882</link><guid isPermaLink="true">https://multitool.ninja/post/769882</guid><dc:creator><![CDATA[Gareth]]></dc:creator><pubDate>Sun, 01 Sep 2013 11:57:32 GMT</pubDate></item><item><title><![CDATA[Reply to Key chain Drivers DIY on Fri, 30 Aug 2013 15:56:02 GMT]]></title><description><![CDATA[<p dir="auto"><img src="/assets/uploads/smileys/multitool.gif" alt=":multi:" title="multi" class="forum-smiley emoji" /></p>
<p dir="auto">I love following the progression of this mods. Clever thinking going on around here. <img src="/assets/uploads/smileys/hatsoff.gif" alt=":hatsoff:" title="Hats Off" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/769343</link><guid isPermaLink="true">https://multitool.ninja/post/769343</guid><dc:creator><![CDATA[enki_ck]]></dc:creator><pubDate>Fri, 30 Aug 2013 15:56:02 GMT</pubDate></item><item><title><![CDATA[Reply to Key chain Drivers DIY on Fri, 30 Aug 2013 15:45:36 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/jph0200" aria-label="Profile: jph0200">@<bdi>jph0200</bdi></a> <a href="/post/769320">said</a>:</p>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/detron" aria-label="Profile: detron">@<bdi>detron</bdi></a> <a href="/post/768578">said</a>:</p>
<blockquote>
<p dir="auto">Sweet!   I to have been trying to solve the removable bit issue,  no firm solution yet</p>
<p dir="auto">Sent from my SPH-L720 using Tapatalk 2</p>
</blockquote>
<p dir="auto">Got it right (Idea I tried before didn't work)</p>
<p dir="auto">Wasn't sure how at 1st, but eventually decided to take a change, take a bit holder and cut the back off with a hack saw<br />
<img src="http://imageshack.us/a/img849/8590/5yo2.jpg" alt="" class="img-markdown  img-fluid" /><br />
Used your idea of putting a washer by the paracord</p>
<p dir="auto">The rest is pretty much the same as before.<br />
<img src="http://imageshack.us/a/img202/7358/mupk.jpg" alt="" class="img-markdown  img-fluid" /><br />
Put some epoxy in the jack cover and shoved the cut bit holder in</p>
<p dir="auto">Finished Result<br />
<img src="http://imageshack.us/a/img825/4797/dhce.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="http://imageshack.us/a/img821/7697/c4rp.jpg" alt="" class="img-markdown  img-fluid" /></p>
</blockquote>
<p dir="auto">Love it!</p>
<p dir="auto">Sent from my SPH-L720 using Tapatalk 2</p>
]]></description><link>https://multitool.ninja/post/769332</link><guid isPermaLink="true">https://multitool.ninja/post/769332</guid><dc:creator><![CDATA[detron]]></dc:creator><pubDate>Fri, 30 Aug 2013 15:45:36 GMT</pubDate></item><item><title><![CDATA[Reply to Key chain Drivers DIY on Fri, 30 Aug 2013 15:14:55 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/detron" aria-label="Profile: detron">@<bdi>detron</bdi></a> <a href="/post/768578">said</a>:<br />
Sweet!   I to have been trying to solve the removable bit issue,  no firm solution yet</p>
<p dir="auto">Sent from my SPH-L720 using Tapatalk 2</p>
</blockquote>
<p dir="auto">Got it right (Idea I tried before didn't work)</p>
<p dir="auto">Wasn't sure how at 1st, but eventually decided to take a change, take a bit holder and cut the back off with a hack saw<br />
<img src="http://imageshack.us/a/img849/8590/5yo2.jpg" alt="" class="img-markdown  img-fluid" /><br />
Used your idea of putting a washer by the paracord</p>
<p dir="auto">The rest is pretty much the same as before.<br />
<img src="http://imageshack.us/a/img202/7358/mupk.jpg" alt="" class="img-markdown  img-fluid" /><br />
Put some epoxy in the jack cover and shoved the cut bit holder in</p>
<p dir="auto">Finished Result<br />
<img src="http://imageshack.us/a/img825/4797/dhce.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="http://imageshack.us/a/img821/7697/c4rp.jpg" alt="" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/769320</link><guid isPermaLink="true">https://multitool.ninja/post/769320</guid><dc:creator><![CDATA[jph0200]]></dc:creator><pubDate>Fri, 30 Aug 2013 15:14:55 GMT</pubDate></item><item><title><![CDATA[Reply to Key chain Drivers DIY on Wed, 28 Aug 2013 13:16:14 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/jph0200" aria-label="Profile: jph0200">@<bdi>jph0200</bdi></a> <a href="/post/768575">said</a>:<br />
Busy making my magnetized one.<br />
I'm going try make the bit removable so put less epoxy in the jack and letting the magnet set in 1st.</p>
<p dir="auto">Will see how it goes :)</p>
</blockquote>
<p dir="auto">Sweet!   I to have been trying to solve the removable bit issue,  no firm solution yet</p>
<p dir="auto">Sent from my SPH-L720 using Tapatalk 2</p>
]]></description><link>https://multitool.ninja/post/768578</link><guid isPermaLink="true">https://multitool.ninja/post/768578</guid><dc:creator><![CDATA[detron]]></dc:creator><pubDate>Wed, 28 Aug 2013 13:16:14 GMT</pubDate></item><item><title><![CDATA[Reply to Key chain Drivers DIY on Wed, 28 Aug 2013 13:11:50 GMT]]></title><description><![CDATA[<p dir="auto">Busy making my magnetized one.<br />
I'm going try make the bit removable so put less epoxy in the jack and letting the magnet set in 1st.</p>
<p dir="auto">Will see how it goes :)</p>
]]></description><link>https://multitool.ninja/post/768575</link><guid isPermaLink="true">https://multitool.ninja/post/768575</guid><dc:creator><![CDATA[jph0200]]></dc:creator><pubDate>Wed, 28 Aug 2013 13:11:50 GMT</pubDate></item><item><title><![CDATA[Reply to Key chain Drivers DIY on Sun, 25 Aug 2013 07:16:35 GMT]]></title><description><![CDATA[<p dir="auto">Lots of cleverness in this thread  <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
<p dir="auto"><img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/767416</link><guid isPermaLink="true">https://multitool.ninja/post/767416</guid><dc:creator><![CDATA[Sparky415]]></dc:creator><pubDate>Sun, 25 Aug 2013 07:16:35 GMT</pubDate></item><item><title><![CDATA[Reply to Key chain Drivers DIY on Sun, 25 Aug 2013 01:09:04 GMT]]></title><description><![CDATA[<p dir="auto">I am going back to the flea market in hopes of getting more magnets.   His process are a steal!</p>
<p dir="auto">Sent from my SPH-L720 using Tapatalk 2</p>
]]></description><link>https://multitool.ninja/post/767311</link><guid isPermaLink="true">https://multitool.ninja/post/767311</guid><dc:creator><![CDATA[detron]]></dc:creator><pubDate>Sun, 25 Aug 2013 01:09:04 GMT</pubDate></item><item><title><![CDATA[Reply to Key chain Drivers DIY on Mon, 19 Aug 2013 05:32:51 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/detron" aria-label="Profile: detron">@<bdi>detron</bdi></a> <a href="/post/764676">said</a>:<br />
Jph0200,</p>
<p dir="auto">So,   I made my drivers,   and tweeked your instructions a little.</p>
<p dir="auto">I added a a washer that would fit inside the audio Jack sleeve,  but not fit out the back.</p>
<p dir="auto">Had to remove some of the inner stands to get the paracord through the washer.   Also had to use an inner stand to get the bite of the cord through the washer.</p>
<p dir="auto">Today at the flea market one guy was selling really strong magnets cheap.  When I say strong,  I mean strong.   Rare earth strong</p>
<p dir="auto">I bought 16x 1/4 Magnets and 3x  3/8<br />
For $4</p>
<p dir="auto">I put one on the back of each bit,   now they are magnetic.   The lady picture shows how magnetic.   Once the epoxy sets,   I will see how much it can hold</p>
<p dir="auto">Them I used a 1/4 inch compression  sleeve from the plumbing section as a bead</p>
<p dir="auto">Sent from my SPH-L720 using Tapatalk 2</p>
</blockquote>
<p dir="auto"><img src="/assets/uploads/smileys/thumbsup.gif" alt=":2tu:" title="2 thumbs up" class="forum-smiley emoji" /> Kudos Detron Awesome job!  <img src="/assets/uploads/smileys/thumbsup.gif" alt=":2tu:" title="2 thumbs up" class="forum-smiley emoji" /></p>
<p dir="auto">I'm gonna try this when I get home  :D</p>
]]></description><link>https://multitool.ninja/post/764774</link><guid isPermaLink="true">https://multitool.ninja/post/764774</guid><dc:creator><![CDATA[jph0200]]></dc:creator><pubDate>Mon, 19 Aug 2013 05:32:51 GMT</pubDate></item><item><title><![CDATA[Reply to Key chain Drivers DIY on Sun, 18 Aug 2013 23:45:01 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/metropolicity" aria-label="Profile: Metropolicity">@<bdi>Metropolicity</bdi></a> <a href="/post/764681">said</a>:</p>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/detron" aria-label="Profile: detron">@<bdi>detron</bdi></a> <a href="/post/764676">said</a>:</p>
<blockquote>
<p dir="auto">Jph0200,</p>
<p dir="auto">So,   I made my drivers,   and tweeked your instructions a little.</p>
<p dir="auto">I added a a washer that would fit inside the audio Jack sleeve,  but not fit out the back.</p>
<p dir="auto">Had to remove some of the inner stands to get the paracord through the washer.   Also had to use an inner stand to get the bite of the cord through the washer.</p>
<p dir="auto">Today at the flea market one guy was selling really strong magnets cheap.  When I say strong,  I mean strong.   Rare earth strong</p>
<p dir="auto">I bought 16x 1/4 Magnets and 3x  3/8<br />
For $4</p>
<p dir="auto">I put one on the back of each bit,   now they are magnetic.   The lady picture shows how magnetic.   Once the epoxy sets,   I will see how much it can hold</p>
<p dir="auto">Them I used a 1/4 inch compression  sleeve from the plumbing section as a bead</p>
<p dir="auto">Sent from my SPH-L720 using Tapatalk 2</p>
</blockquote>
<p dir="auto">Now THAT'S thinking!</p>
</blockquote>
<p dir="auto">Metro,</p>
<p dir="auto">You have no idea how much that means coming from you  <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/764685</link><guid isPermaLink="true">https://multitool.ninja/post/764685</guid><dc:creator><![CDATA[detron]]></dc:creator><pubDate>Sun, 18 Aug 2013 23:45:01 GMT</pubDate></item><item><title><![CDATA[Reply to Key chain Drivers DIY on Sun, 18 Aug 2013 23:32:22 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/detron" aria-label="Profile: detron">@<bdi>detron</bdi></a> <a href="/post/764676">said</a>:<br />
Jph0200,</p>
<p dir="auto">So,   I made my drivers,   and tweeked your instructions a little.</p>
<p dir="auto">I added a a washer that would fit inside the audio Jack sleeve,  but not fit out the back.</p>
<p dir="auto">Had to remove some of the inner stands to get the paracord through the washer.   Also had to use an inner stand to get the bite of the cord through the washer.</p>
<p dir="auto">Today at the flea market one guy was selling really strong magnets cheap.  When I say strong,  I mean strong.   Rare earth strong</p>
<p dir="auto">I bought 16x 1/4 Magnets and 3x  3/8<br />
For $4</p>
<p dir="auto">I put one on the back of each bit,   now they are magnetic.   The lady picture shows how magnetic.   Once the epoxy sets,   I will see how much it can hold</p>
<p dir="auto">Them I used a 1/4 inch compression  sleeve from the plumbing section as a bead</p>
<p dir="auto">Sent from my SPH-L720 using Tapatalk 2</p>
</blockquote>
<p dir="auto">Now THAT'S thinking!</p>
]]></description><link>https://multitool.ninja/post/764681</link><guid isPermaLink="true">https://multitool.ninja/post/764681</guid><dc:creator><![CDATA[Metropolicity]]></dc:creator><pubDate>Sun, 18 Aug 2013 23:32:22 GMT</pubDate></item><item><title><![CDATA[Reply to Key chain Drivers DIY on Sun, 18 Aug 2013 23:05:46 GMT]]></title><description><![CDATA[<p dir="auto">Jph0200,</p>
<p dir="auto">So,   I made my drivers,   and tweeked your instructions a little.</p>
<p dir="auto">I added a a washer that would fit inside the audio Jack sleeve,  but not fit out the back.</p>
<p dir="auto">Had to remove some of the inner stands to get the paracord through the washer.   Also had to use an inner stand to get the bite of the cord through the washer.</p>
<p dir="auto">Today at the flea market one guy was selling really strong magnets cheap.  When I say strong,  I mean strong.   Rare earth strong</p>
<p dir="auto">I bought 16x 1/4 Magnets and 3x  3/8<br />
For $4</p>
<p dir="auto">I put one on the back of each bit,   now they are magnetic.   The lady picture shows how magnetic.   Once the epoxy sets,   I will see how much it can hold</p>
<p dir="auto">Them I used a 1/4 inch compression  sleeve from the plumbing section as a bead</p>
<p dir="auto">Sent from my SPH-L720 using Tapatalk 2</p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/55879_uploadfromtaptalk1376867000835.jpg" alt="uploadfromtaptalk1376867000835.jpg" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/55881_uploadfromtaptalk1376867019105.jpg" alt="uploadfromtaptalk1376867019105.jpg" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/55883_uploadfromtaptalk1376867032026.jpg" alt="uploadfromtaptalk1376867032026.jpg" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/55885_uploadfromtaptalk1376867049079.jpg" alt="uploadfromtaptalk1376867049079.jpg" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/764676</link><guid isPermaLink="true">https://multitool.ninja/post/764676</guid><dc:creator><![CDATA[detron]]></dc:creator><pubDate>Sun, 18 Aug 2013 23:05:46 GMT</pubDate></item><item><title><![CDATA[Reply to Key chain Drivers DIY on Sat, 17 Aug 2013 18:57:10 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/detron" aria-label="Profile: detron">@<bdi>detron</bdi></a> <a href="/post/763972">said</a>:<br />
Jph200,</p>
<p dir="auto">I went and bought 2 audio jacks last night.   8 need the epoxy still though</p>
<p dir="auto">Sent from my SPH-L720 using Tapatalk 2</p>
</blockquote>
<p dir="auto">Nice cant wait to see :)</p>
<p dir="auto">Please dont get normal epoxy, it not only takes longer but is very messy as well</p>
<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/nhoj" aria-label="Profile: Nhoj">@<bdi>Nhoj</bdi></a> <a href="/post/764006">said</a>:<br />
I want to do this but I'm pretty sure I feel too lazy today. :)</p>
</blockquote>
<p dir="auto">When ever you want :)<br />
They're very quick. My 1st one (the black philips) took about 15 to 20 min</p>
<p dir="auto">The others only took 5 to 10 min<br />
Sent using Tapatalk</p>
]]></description><link>https://multitool.ninja/post/764067</link><guid isPermaLink="true">https://multitool.ninja/post/764067</guid><dc:creator><![CDATA[jph0200]]></dc:creator><pubDate>Sat, 17 Aug 2013 18:57:10 GMT</pubDate></item><item><title><![CDATA[Reply to Key chain Drivers DIY on Sat, 17 Aug 2013 18:47:57 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/rdub934" aria-label="Profile: rdub934">@<bdi>rdub934</bdi></a> <a href="/post/763137">said</a>:<br />
How strong are these? Forgive me, I am not familiar with steel putty</p>
<p dir="auto">Great idea, BTW, these look amazing</p>
</blockquote>
<p dir="auto">Sorry Rdub, missed your post</p>
<p dir="auto">Thanks for the compliment:)</p>
<p dir="auto">The steel putty is very solid. Ive disasembled and reasembled a speaker with the black one no probs</p>
<p dir="auto">Sent using Tapatalk</p>
]]></description><link>https://multitool.ninja/post/764066</link><guid isPermaLink="true">https://multitool.ninja/post/764066</guid><dc:creator><![CDATA[jph0200]]></dc:creator><pubDate>Sat, 17 Aug 2013 18:47:57 GMT</pubDate></item><item><title><![CDATA[Reply to Key chain Drivers DIY on Sat, 17 Aug 2013 15:43:56 GMT]]></title><description><![CDATA[<p dir="auto">I want to do this but I'm pretty sure I feel too lazy today. :)</p>
]]></description><link>https://multitool.ninja/post/764006</link><guid isPermaLink="true">https://multitool.ninja/post/764006</guid><dc:creator><![CDATA[Nhoj]]></dc:creator><pubDate>Sat, 17 Aug 2013 15:43:56 GMT</pubDate></item><item><title><![CDATA[Reply to Key chain Drivers DIY on Sat, 17 Aug 2013 14:10:01 GMT]]></title><description><![CDATA[<p dir="auto">Jph200,</p>
<p dir="auto">I went and bought 2 audio jacks last night.   8 need the epoxy still though</p>
<p dir="auto">Sent from my SPH-L720 using Tapatalk 2</p>
]]></description><link>https://multitool.ninja/post/763972</link><guid isPermaLink="true">https://multitool.ninja/post/763972</guid><dc:creator><![CDATA[detron]]></dc:creator><pubDate>Sat, 17 Aug 2013 14:10:01 GMT</pubDate></item><item><title><![CDATA[Reply to Key chain Drivers DIY on Sat, 17 Aug 2013 12:18:54 GMT]]></title><description><![CDATA[<p dir="auto">Thanks a lot guys :D</p>
<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/detron" aria-label="Profile: detron">@<bdi>detron</bdi></a> <a href="/post/763145">said</a>:<br />
Jph0200 made some awesome drivers.</p>
<p dir="auto">I do not have any audio jacks,   but I will get some.   But for now, I can show what I made to hold me over.</p>
<p dir="auto"><strong>Yes,  that is part of a skillcraft ink pen.  The type that had a kind of grippy Rubbery body.  Had to carve out the one side to fit the bit.   I used the awl on my Surge for that.   Then super glued everything in place</strong></p>
<p dir="auto">Sent from my SPH-L720 using Tapatalk 2</p>
</blockquote>
<p dir="auto">Nice!! I like it! <img src="/assets/uploads/smileys/thumbsup.gif" alt=":2tu:" title="2 thumbs up" class="forum-smiley emoji" /></p>
<p dir="auto">If you carry warm colors you can also get old plated jacks from the electronics store</p>
]]></description><link>https://multitool.ninja/post/763942</link><guid isPermaLink="true">https://multitool.ninja/post/763942</guid><dc:creator><![CDATA[jph0200]]></dc:creator><pubDate>Sat, 17 Aug 2013 12:18:54 GMT</pubDate></item><item><title><![CDATA[Reply to Key chain Drivers DIY on Fri, 16 Aug 2013 01:39:56 GMT]]></title><description><![CDATA[<p dir="auto">Really cool!</p>
]]></description><link>https://multitool.ninja/post/763390</link><guid isPermaLink="true">https://multitool.ninja/post/763390</guid><dc:creator><![CDATA[Nhoj]]></dc:creator><pubDate>Fri, 16 Aug 2013 01:39:56 GMT</pubDate></item><item><title><![CDATA[Reply to Key chain Drivers DIY on Fri, 16 Aug 2013 00:33:42 GMT]]></title><description><![CDATA[<p dir="auto">That is absolutely excellent!  <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/gimme.gif" alt=":gimme:" title="gimme" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/763365</link><guid isPermaLink="true">https://multitool.ninja/post/763365</guid><dc:creator><![CDATA[Rs217]]></dc:creator><pubDate>Fri, 16 Aug 2013 00:33:42 GMT</pubDate></item><item><title><![CDATA[Reply to Key chain Drivers DIY on Thu, 15 Aug 2013 17:18:50 GMT]]></title><description><![CDATA[<p dir="auto">nice walk-though and a cool idea. <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/763183</link><guid isPermaLink="true">https://multitool.ninja/post/763183</guid><dc:creator><![CDATA[Gareth]]></dc:creator><pubDate>Thu, 15 Aug 2013 17:18:50 GMT</pubDate></item><item><title><![CDATA[Reply to Key chain Drivers DIY on Thu, 15 Aug 2013 15:45:48 GMT]]></title><description><![CDATA[<p dir="auto">Jph0200 made some awesome drivers.</p>
<p dir="auto">I do not have any audio jacks,   but I will get some.   But for now, I can show what I made to hold me over.</p>
<p dir="auto">Yes,  that is part of a skillcraft ink pen.  The type that had a kind of grippy Rubbery body.  Had to carve out the one side to fit the bit.   I used the awl on my Surge for that.   Then super glued everything in place</p>
<p dir="auto">Sent from my SPH-L720 using Tapatalk 2</p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/55691_uploadfromtaptalk1376581370996.jpg" alt="uploadfromtaptalk1376581370996.jpg" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/763145</link><guid isPermaLink="true">https://multitool.ninja/post/763145</guid><dc:creator><![CDATA[detron]]></dc:creator><pubDate>Thu, 15 Aug 2013 15:45:48 GMT</pubDate></item><item><title><![CDATA[Reply to Key chain Drivers DIY on Thu, 15 Aug 2013 15:38:52 GMT]]></title><description><![CDATA[<p dir="auto">here is a better picture from the net</p>
<p dir="auto"><img src="http://www.homefixitparts.com/electrical/images/E5-44-142.jpg" alt="" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/763143</link><guid isPermaLink="true">https://multitool.ninja/post/763143</guid><dc:creator><![CDATA[detron]]></dc:creator><pubDate>Thu, 15 Aug 2013 15:38:52 GMT</pubDate></item></channel></rss>