<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0"><channel><title><![CDATA[My bargain basement ebay MP600 purchase]]></title><description><![CDATA[<p dir="auto">So, today was a good day for what the mailman brought.</p>
<p dir="auto">My long-awaited Skinth Milky Way showed up, along with an old PST II, and...</p>
<p dir="auto">An MP600 that I won on ebay for $13, with shipping.</p>
<p dir="auto">Great condition, except... both blades are snapped off. It looks intentional, like maybe someone was trying to make it airport friendly or something...</p>
<p dir="auto">Then again... there is rusty red residue in spots that make me think it might be blood, so...  <img src="/assets/uploads/smileys/thinking.gif" alt=":think:" title="Thinking" class="forum-smiley emoji" /></p>
<p dir="auto"><img src="http://i105.photobucket.com/albums/m208/lynnlefey/IMGP1615_zpsa57b2c70.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Thanks to Kirk, I have a replacement blade on the way.</p>
]]></description><link>https://multitool.ninja/topic/49504/my-bargain-basement-ebay-mp600-purchase</link><generator>RSS for Node</generator><lastBuildDate>Wed, 18 Nov 2026 23:42:32 GMT</lastBuildDate><atom:link href="https://multitool.ninja/topic/49504.rss" rel="self" type="application/rss+xml"/><pubDate>Sat, 11 Jan 2014 21:32:38 GMT</pubDate><ttl>60</ttl><item><title><![CDATA[Reply to My bargain basement ebay MP600 purchase on Sat, 27 Jun 2015 14:07:31 GMT]]></title><description><![CDATA[<p dir="auto">Thanks.<br />
One of the best photo tutorials I've seen.<br />
:) :)</p>
]]></description><link>https://multitool.ninja/post/1110930</link><guid isPermaLink="true">https://multitool.ninja/post/1110930</guid><dc:creator><![CDATA[neillcurrie]]></dc:creator><pubDate>Sat, 27 Jun 2015 14:07:31 GMT</pubDate></item><item><title><![CDATA[Reply to My bargain basement ebay MP600 purchase on Sat, 27 Jun 2015 07:27:03 GMT]]></title><description><![CDATA[<p dir="auto">It really is a great thread Lynn.  <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1110789</link><guid isPermaLink="true">https://multitool.ninja/post/1110789</guid><dc:creator><![CDATA[zoidberg]]></dc:creator><pubDate>Sat, 27 Jun 2015 07:27:03 GMT</pubDate></item><item><title><![CDATA[Reply to My bargain basement ebay MP600 purchase on Sat, 27 Jun 2015 07:13:43 GMT]]></title><description><![CDATA[<p dir="auto">Wow. It's super cool that this was useful to someone. Very glad to help.  <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1110781</link><guid isPermaLink="true">https://multitool.ninja/post/1110781</guid><dc:creator><![CDATA[Lynn LeFey]]></dc:creator><pubDate>Sat, 27 Jun 2015 07:13:43 GMT</pubDate></item><item><title><![CDATA[Reply to My bargain basement ebay MP600 purchase on Sat, 27 Jun 2015 01:55:59 GMT]]></title><description><![CDATA[<p dir="auto">Without this post ( I know it's 6 months old) I would still be trying to put my MP600  back together<br />
Thanks Lynn</p>
]]></description><link>https://multitool.ninja/post/1110694</link><guid isPermaLink="true">https://multitool.ninja/post/1110694</guid><dc:creator><![CDATA[Marcellus]]></dc:creator><pubDate>Sat, 27 Jun 2015 01:55:59 GMT</pubDate></item><item><title><![CDATA[Reply to My bargain basement ebay MP600 purchase on Mon, 27 Jan 2014 02:30:54 GMT]]></title><description><![CDATA[<p dir="auto">Nice photo tutorial Lynn, and congrats on your first tear down &amp; rebuild! <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/835764</link><guid isPermaLink="true">https://multitool.ninja/post/835764</guid><dc:creator><![CDATA[J-sews]]></dc:creator><pubDate>Mon, 27 Jan 2014 02:30:54 GMT</pubDate></item><item><title><![CDATA[Reply to My bargain basement ebay MP600 purchase on Sun, 26 Jan 2014 11:12:27 GMT]]></title><description><![CDATA[<p dir="auto">That is  a nice pictorial, Lynn. Thanks.<br />
I find it easier when  I use a Nail inserted from the other side of the plier handle to kepp the already installed tools in place while you are reaching for the next washer and tool.<br />
And holding the plier handle in a vise or somehow clamped to the table might be helpful, too.<br />
Lastly, after several dis- and reassemblys, I think it´s best to insert the tools while the plier head is out, this gives you more room.</p>
<p dir="auto">Still, sometimes I do invent new swear words, too. ;)</p>
]]></description><link>https://multitool.ninja/post/835254</link><guid isPermaLink="true">https://multitool.ninja/post/835254</guid><dc:creator><![CDATA[lowtech]]></dc:creator><pubDate>Sun, 26 Jan 2014 11:12:27 GMT</pubDate></item><item><title><![CDATA[Reply to My bargain basement ebay MP600 purchase on Sun, 26 Jan 2014 02:39:55 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/gareth" aria-label="Profile: Gareth">@<bdi>Gareth</bdi></a> <a href="/post/835150">said</a>:<br />
<strong>Great walk through Lynn.</strong> <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto"><img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/835161</link><guid isPermaLink="true">https://multitool.ninja/post/835161</guid><dc:creator><![CDATA[David]]></dc:creator><pubDate>Sun, 26 Jan 2014 02:39:55 GMT</pubDate></item><item><title><![CDATA[Reply to My bargain basement ebay MP600 purchase on Sun, 26 Jan 2014 02:17:58 GMT]]></title><description><![CDATA[<p dir="auto">Great walk through Lynn. <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/835150</link><guid isPermaLink="true">https://multitool.ninja/post/835150</guid><dc:creator><![CDATA[Gareth]]></dc:creator><pubDate>Sun, 26 Jan 2014 02:17:58 GMT</pubDate></item><item><title><![CDATA[Reply to My bargain basement ebay MP600 purchase on Sun, 26 Jan 2014 01:16:13 GMT]]></title><description><![CDATA[<p dir="auto">Simply because I rarely use the blades on my MT's.  I always have a folder on me, either a dedicated one or a SAK, and sometimes both.  My multitools are there for the drivers, pliers, file, etc.  With the file from the 450 replacing the blade in the 400, I can have sliding pliers, scissors, and a file in one compact package.  <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" />  At work the pliers are not used every day, but often enough that they're good to have around.  A blade is used dozens of times a day, opening boxes, cutting material for samples, etc.  My usual working blade is a Kerhaw Needs Work, a Wharncliffe-bladed OHO tank that's basically a utility knife on steroids.  Add a Tinker or a traditional slipjoint to the mix, and I'm well covered in terms of cutting things.  The MP's blade sees almost no use at all.</p>
]]></description><link>https://multitool.ninja/post/835125</link><guid isPermaLink="true">https://multitool.ninja/post/835125</guid><dc:creator><![CDATA[jerseydevil]]></dc:creator><pubDate>Sun, 26 Jan 2014 01:16:13 GMT</pubDate></item><item><title><![CDATA[Reply to My bargain basement ebay MP600 purchase on Sun, 26 Jan 2014 00:35:24 GMT]]></title><description><![CDATA[<p dir="auto">How come your thinking bladeless JD?</p>
]]></description><link>https://multitool.ninja/post/835106</link><guid isPermaLink="true">https://multitool.ninja/post/835106</guid><dc:creator><![CDATA[kirk13]]></dc:creator><pubDate>Sun, 26 Jan 2014 00:35:24 GMT</pubDate></item><item><title><![CDATA[Reply to My bargain basement ebay MP600 purchase on Sun, 26 Jan 2014 00:30:41 GMT]]></title><description><![CDATA[<p dir="auto"><img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /> to Kirky for hooking Lynn up with the blade, and thanks Lynn for the pics.  I'm thinking about combining my MP400 and 450 to make a bladeless 425, but was a bit nervous about tearing apart two perfectly good tools and ending up with a pile of parts I can't figure out.  Think it's gonna be time soon to give it a shot.</p>
]]></description><link>https://multitool.ninja/post/835102</link><guid isPermaLink="true">https://multitool.ninja/post/835102</guid><dc:creator><![CDATA[jerseydevil]]></dc:creator><pubDate>Sun, 26 Jan 2014 00:30:41 GMT</pubDate></item><item><title><![CDATA[Reply to My bargain basement ebay MP600 purchase on Sat, 25 Jan 2014 22:51:07 GMT]]></title><description><![CDATA[<p dir="auto">I'm pleased to hear the blade made it ok! Nice step by step guide through the guts of a Gerber Lynn <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/835070</link><guid isPermaLink="true">https://multitool.ninja/post/835070</guid><dc:creator><![CDATA[kirk13]]></dc:creator><pubDate>Sat, 25 Jan 2014 22:51:07 GMT</pubDate></item><item><title><![CDATA[Reply to My bargain basement ebay MP600 purchase on Sat, 25 Jan 2014 19:27:07 GMT]]></title><description><![CDATA[<p dir="auto">So the blade arrived from Kirk today, from across the pond, and i continued with reassembly.</p>
<p dir="auto">I... uhhh... heh. I forgot to keep track of which tools were where, and in what order, so I reassembled the tool going off of some photos of the MP600.</p>
<p dir="auto">So, reassembling this tool is apparently an exercise in jenga-like motor skills, coupled with language exercise in creating new swear words. I tried about four times before I got one side done. However, once you do, it's a little easier the second time.</p>
<p dir="auto">So, the method that worked for me.</p>
<p dir="auto">Hold the tool handles so they are parallel to the surface you're working on. Put the pin on the work surface, with shaft facing up. Put the pin through the hole in the handle (with the 4 notches in it) so just about an eight of an inch sticks through the handle.<br />
<img src="http://i105.photobucket.com/albums/m208/lynnlefey/IMGP1648_zps0616c01b.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Set your first tool of the stack so the pin is protruding through it. This was one of the trickiest parts in the operation. I found that using something to hold the long tool horizontal made the process easier. In my case, I used a folded place mat to prop up the other end of the file pictured.<br />
<img src="http://i105.photobucket.com/albums/m208/lynnlefey/IMGP1649_zps34a2a6b3.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Set a washer on top of the tool. It is important to note that the small tab on the washer should be toward the end of the tool, facing the side with the locking tab, and should slot into the opening on the tool handle just past the locking tab.<br />
<img src="http://i105.photobucket.com/albums/m208/lynnlefey/IMGP1650_zps15611b3c.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Lower the tool body slightly, to allow more of the pin to protrude through the handle, and repeat the process until all tools are in place. Once they are, you may find that the pin does not want to line up with the hole in the tool handle to finish being pushed into place. Pulling back on the locking tab should allow the pin to come into alignment. Once it does, push it the rest of the way through, and thread the screw into the hollow end. Tighten the nut to finger tight, then use pliers or vice grips to tighten more, checking to ensure the tools inside the handle are still able to move freely.</p>
<p dir="auto">Flip the tool over, and repeat with the other tool handle.</p>
<p dir="auto">In this process, it's important to make sure that those small tabs on the washers are in the slot behind the locking tab. It should look like this when properly installed. You can see the small metal tabs on the washers protruding in the slot behind the locking tab.<br />
<img src="http://i105.photobucket.com/albums/m208/lynnlefey/IMGP1651_zps67665931.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">And... that's it. My first tool disassembly/reassembly. Much thanks to Kirk for the blade. This old MP600 still has a broken blade stub but that really doesn't matter to me. It has one decent blade, and as I mostly got it to mess around with, I'm fine with it as is.</p>
]]></description><link>https://multitool.ninja/post/834902</link><guid isPermaLink="true">https://multitool.ninja/post/834902</guid><dc:creator><![CDATA[Lynn LeFey]]></dc:creator><pubDate>Sat, 25 Jan 2014 19:27:07 GMT</pubDate></item><item><title><![CDATA[Reply to My bargain basement ebay MP600 purchase on Wed, 15 Jan 2014 17:46:18 GMT]]></title><description><![CDATA[<p dir="auto">Awesome, great play by play ! Thumbs up</p>
<p dir="auto">Swiss Army knives .</p>
]]></description><link>https://multitool.ninja/post/829424</link><guid isPermaLink="true">https://multitool.ninja/post/829424</guid><dc:creator><![CDATA[colt 1911]]></dc:creator><pubDate>Wed, 15 Jan 2014 17:46:18 GMT</pubDate></item><item><title><![CDATA[Reply to My bargain basement ebay MP600 purchase on Tue, 14 Jan 2014 21:36:29 GMT]]></title><description><![CDATA[<p dir="auto">I would definitely like a pair of scissors, if you had them laying around.</p>
<p dir="auto">Also, since I don't think I've seen this descibed here, I though I'd demonstrate how I reassembled the plier head assembly.</p>
<p dir="auto">First, Here is a picture of the parts: The plier head, the tool body, two retention buttons, two button springs, and two retention clips.<br />
<img src="http://i105.photobucket.com/albums/m208/lynnlefey/IMGP1625_zps8dbf8066.jpg" alt="" class="img-markdown  img-fluid" /></p>
<ol>
<li>
<p dir="auto">Turn the retention buttons hollow side up, and insert the button springs.<br />
<img src="http://i105.photobucket.com/albums/m208/lynnlefey/IMGP1626_zps32ff4320.jpg" alt="" class="img-markdown  img-fluid" /></p>
</li>
<li>
<p dir="auto">Carefully set button with spring into the hole in the plier assembly. Be careful not to lose that spring.<br />
<img src="http://i105.photobucket.com/albums/m208/lynnlefey/IMGP1627_zpse71230b6.jpg" alt="" class="img-markdown  img-fluid" /></p>
</li>
<li>
<p dir="auto">Set the plier head into the tool body, with the loose button and spring facing up. This lets gravity hold it in place for you.<br />
<img src="http://i105.photobucket.com/albums/m208/lynnlefey/IMGP1628_zps29c95281.jpg" alt="" class="img-markdown  img-fluid" /></p>
</li>
<li>
<p dir="auto">Set the retention clip over the protruding pins and retention button. The clip should have the worn side facing down (against the tool body) and the open end facing the plier head.<br />
<img src="http://i105.photobucket.com/albums/m208/lynnlefey/IMGP1629_zps23fcb9d4.jpg" alt="" class="img-markdown  img-fluid" /></p>
</li>
<li>
<p dir="auto">With pliers or vice grips, place one jaw against the back of the retention clip (the side away from the plier head), and the other against the pin nearest the plier head. Ensure that the front opening (of the retention clip) is aligned with the notches in the forward pin. Apply gentle pressure to the plier or vice grip, and the retention clip will slide into place.<br />
<img src="http://i105.photobucket.com/albums/m208/lynnlefey/IMGP1630_zpsa2ee5707.jpg" alt="" class="img-markdown  img-fluid" /></p>
</li>
<li>
<p dir="auto">Flip the tool over, and open the arms of the body</p>
</li>
<li>
<p dir="auto">Repeat steps 2-5 with the other side.<br />
<img src="http://i105.photobucket.com/albums/m208/lynnlefey/IMGP1631_zpsd2ff4356.jpg" alt="" class="img-markdown  img-fluid" /></p>
</li>
</ol>
<p dir="auto">And, for reference, removing the retention clips is much the same as installing them, except that you put the jaw of your plier or vise grip on the front edge of the clip, and back pin, to force the clip off. Of very IMPORTANT note, also is that you should very gently raise the tool body arm so you don't send the retention button and button spring flying off like missiles from a 1970's Battlestar Galactica toy.</p>
<p dir="auto">I think that about covers it.</p>
]]></description><link>https://multitool.ninja/post/829044</link><guid isPermaLink="true">https://multitool.ninja/post/829044</guid><dc:creator><![CDATA[Lynn LeFey]]></dc:creator><pubDate>Tue, 14 Jan 2014 21:36:29 GMT</pubDate></item><item><title><![CDATA[Reply to My bargain basement ebay MP600 purchase on Tue, 14 Jan 2014 08:17:39 GMT]]></title><description><![CDATA[<p dir="auto">If you are interested, I do have a serrated  blade for you, or maybe a saw out of another Gerber - Not sure about scissors, but will have a look.<br />
Looking good so far, Lynn.</p>
]]></description><link>https://multitool.ninja/post/828719</link><guid isPermaLink="true">https://multitool.ninja/post/828719</guid><dc:creator><![CDATA[lowtech]]></dc:creator><pubDate>Tue, 14 Jan 2014 08:17:39 GMT</pubDate></item><item><title><![CDATA[Reply to My bargain basement ebay MP600 purchase on Mon, 13 Jan 2014 21:07:27 GMT]]></title><description><![CDATA[<p dir="auto">Okay, so here's the tool taken down, with initial cleaning.</p>
<p dir="auto">The broken blade stubs can be seen on the far right of the tool lineup.</p>
<p dir="auto"><img src="http://i105.photobucket.com/albums/m208/lynnlefey/IMGP1617_zpscb44aeb6.jpg" alt="" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/828480</link><guid isPermaLink="true">https://multitool.ninja/post/828480</guid><dc:creator><![CDATA[Lynn LeFey]]></dc:creator><pubDate>Mon, 13 Jan 2014 21:07:27 GMT</pubDate></item><item><title><![CDATA[Reply to My bargain basement ebay MP600 purchase on Mon, 13 Jan 2014 20:15:16 GMT]]></title><description><![CDATA[<p dir="auto">I might disassemble both sides, just to give all the parts a good cleaning before reassembly.</p>
<p dir="auto">And I'll try to remember to take pics.</p>
]]></description><link>https://multitool.ninja/post/828430</link><guid isPermaLink="true">https://multitool.ninja/post/828430</guid><dc:creator><![CDATA[Lynn LeFey]]></dc:creator><pubDate>Mon, 13 Jan 2014 20:15:16 GMT</pubDate></item><item><title><![CDATA[Reply to My bargain basement ebay MP600 purchase on Mon, 13 Jan 2014 19:50:00 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto">@Lynn LeFey <a href="/post/828405">said</a>:<br />
The vice grips thing did the trick. Disassembled, and awaiting parts.  <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">we want pic's when you are done !! " good job "</p>
]]></description><link>https://multitool.ninja/post/828411</link><guid isPermaLink="true">https://multitool.ninja/post/828411</guid><dc:creator><![CDATA[colt 1911]]></dc:creator><pubDate>Mon, 13 Jan 2014 19:50:00 GMT</pubDate></item><item><title><![CDATA[Reply to My bargain basement ebay MP600 purchase on Mon, 13 Jan 2014 19:46:09 GMT]]></title><description><![CDATA[<p dir="auto">The vice grips thing did the trick. Disassembled, and awaiting parts.  <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/828405</link><guid isPermaLink="true">https://multitool.ninja/post/828405</guid><dc:creator><![CDATA[Lynn LeFey]]></dc:creator><pubDate>Mon, 13 Jan 2014 19:46:09 GMT</pubDate></item><item><title><![CDATA[Reply to My bargain basement ebay MP600 purchase on Mon, 13 Jan 2014 17:41:01 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto">@Lynn LeFey <a href="/post/828255">said</a>:<br />
Right, so... replacement blade on the way.</p>
<p dir="auto">What is the tool called for undoing those funky bolts holding this thing together, and where do I get them?</p>
<p dir="auto">(I suspect just knowing what it's called will allow me to do a search online for the tool.)</p>
</blockquote>
<p dir="auto">I know Lowtech ground an MP600 apart to "make" two of those wrenches...</p>
]]></description><link>https://multitool.ninja/post/828337</link><guid isPermaLink="true">https://multitool.ninja/post/828337</guid><dc:creator><![CDATA[bmot]]></dc:creator><pubDate>Mon, 13 Jan 2014 17:41:01 GMT</pubDate></item><item><title><![CDATA[Reply to My bargain basement ebay MP600 purchase on Mon, 13 Jan 2014 17:38:58 GMT]]></title><description><![CDATA[<p dir="auto">For future reference, if someone stumbles across this and has the same question, here's a link to the post in the thread mentioned above.</p>
<p dir="auto">Thanks to Gareth for the answer. Thanks colt 1911 for pointing me in that direction.</p>
<p dir="auto"></p><div class="card col-md-9 col-lg-6 position-relative link-preview p-0">

<div class="card-body">
<h5 class="card-title">
<a class="text-decoration-none" href="http://216.137.186.219/gerber-tools/what-gerber-did-you-carry-today/msg825101/">
404 Not Found
</a>
</h5>
<p class="card-text line-clamp-3"></p>
</div>
<a href="http://216.137.186.219/gerber-tools/what-gerber-did-you-carry-today/msg825101/" class="card-footer text-body-secondary small d-flex gap-2 align-items-center lh-2">



<img src="http://216.137.186.219/favicon.ico" alt="favicon" class="not-responsive overflow-hiddden" style="max-width:21px;max-height:21px" />



<p class="d-inline-block text-truncate mb-0"> <span class="text-secondary">(forum.multitool.org)</span></p>
</a>
</div><p></p>
]]></description><link>https://multitool.ninja/post/828333</link><guid isPermaLink="true">https://multitool.ninja/post/828333</guid><dc:creator><![CDATA[Lynn LeFey]]></dc:creator><pubDate>Mon, 13 Jan 2014 17:38:58 GMT</pubDate></item><item><title><![CDATA[Reply to My bargain basement ebay MP600 purchase on Mon, 13 Jan 2014 15:48:35 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto">@Lynn LeFey <a href="/post/828255">said</a>:<br />
Right, so... replacement blade on the way.</p>
<p dir="auto">What is the tool called for undoing those funky bolts holding this thing together, and where do I get them?</p>
<p dir="auto">(I suspect just knowing what it's called will allow me to do a search online for the tool.)</p>
</blockquote>
<p dir="auto">Check out  " whats being carried today " in the gerber section, there is some helpful info there.</p>
]]></description><link>https://multitool.ninja/post/828273</link><guid isPermaLink="true">https://multitool.ninja/post/828273</guid><dc:creator><![CDATA[colt 1911]]></dc:creator><pubDate>Mon, 13 Jan 2014 15:48:35 GMT</pubDate></item><item><title><![CDATA[Reply to My bargain basement ebay MP600 purchase on Mon, 13 Jan 2014 15:21:10 GMT]]></title><description><![CDATA[<p dir="auto">Right, so... replacement blade on the way.</p>
<p dir="auto">What is the tool called for undoing those funky bolts holding this thing together, and where do I get them?</p>
<p dir="auto">(I suspect just knowing what it's called will allow me to do a search online for the tool.)</p>
]]></description><link>https://multitool.ninja/post/828255</link><guid isPermaLink="true">https://multitool.ninja/post/828255</guid><dc:creator><![CDATA[Lynn LeFey]]></dc:creator><pubDate>Mon, 13 Jan 2014 15:21:10 GMT</pubDate></item></channel></rss>