<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0"><channel><title><![CDATA[Down Memory Lane]]></title><description><![CDATA[<p dir="auto">I was looking for a tool and opened an old tool box and found this.</p>
<p dir="auto">It's a genuine Kutmaster. I bought this over 50 years ago. It cost about 5 dollars. The cheapest Case knife at the time was 10 dollars,and that was for a little one. You have to multiply that by about 8 times to get todays dollars. Kutmaster still makes this knife in the USA for $21.00 in stainless with Delrin scales. You can see how much more expensive tools were then. A black and white TV was $200, equivalent today to $800. A policeman or plumber made $100 a week. And taxes were taken out of that.</p>
<p dir="auto">Even though tools and appliances were expensive, the really necessary things were cheap. A good house cost 15 thousand dollars. Three years of that policeman's wage. That same house is 400 thousand or more today. At a wage of 50 thousand it takes 8 years to pay off and you can not get a mortgage if your wage is that low. Food was $25 for 5 large paper bags full. Gas was 30 cents and fuel oil was 12 cents a gallon.</p>
<p dir="auto">At the time knives were just another tool for me and I needed one to scrape old  gaskets off and to cut tubing or hoses etc. This knife looked sturdy so I bought it. You can see that one of the scales cracked and fell off. I just hammered the rivets and kept using it. Then I forgot about it until I just found it again. I would like to try my hand at restoring it. A good one to get my feet wet on rather than a SAK.</p>
<p dir="auto">An uncle of mine who was a machinist  used to refer to the general run of American knifes as being made from hoop iron, referring to the hoops around wooden barrels. I agreed with him. It wasn't until I got my first SAK in 1996 that I began to appreciate a good knife.</p>
<p dir="auto">You can  imagine my surprise when I checked on Ebay and saw the prices of some of those old boy scout knives. They used to give them away free with a pair of hiking boots. You could get a good vintage SAK for less.</p>
<p dir="auto">Richard</p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/8786_5%2006%20DIMG_2580.jpg.jpg" alt="5 06 DIMG_2580.jpg.jpg" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/8788_5%2006%20DIMG_2579.jpg.jpg" alt="5 06 DIMG_2579.jpg.jpg" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/topic/5164/down-memory-lane</link><generator>RSS for Node</generator><lastBuildDate>Tue, 17 Nov 2026 02:16:13 GMT</lastBuildDate><atom:link href="https://multitool.ninja/topic/5164.rss" rel="self" type="application/rss+xml"/><pubDate>Sat, 07 Jun 2008 21:12:01 GMT</pubDate><ttl>60</ttl><item><title><![CDATA[Reply to Down Memory Lane on Sun, 08 Jun 2008 15:43:07 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/j-sews" aria-label="Profile: J-sews">@<bdi>J-sews</bdi></a> <a href="/post/86424">said</a>:<br />
Very interesting Kent. I've seen that pattern of knife before with a number of different tang stamps. Oftentimes I see them on eBay with Klein Tools markings. I wonder if Kutmaster produced the knives for Klein?</p>
<p dir="auto">And about those blades...does the one have a scraper tip, or is that intended as a screwdriver?</p>
</blockquote>
<p dir="auto">As Def said it is an electrician's knife and the blade you refer to is a screwdriver. This blade has a liner lock. What would be a cutting edge is semi-sharp and was intended to cut insulation. The notch at the base of the blade was to scrape the copper wire clean to solder and has a sharp edge flat grind. The notch higher up on the back was to provide clearance for the nail nick on the cutting blade.</p>
<p dir="auto">I think all the prominent makers made a model like this and it was also sold to the military for use in the signal corp. Which probably explains why the various makes are pretty much identical.</p>
<p dir="auto">There was a bit of wobble in the blade, so holding the bolster on a steel block I hit the other side with a brass hammer, away from the pivot pin. Sure enough the pin protruded further and I was able to rivet it in the tighter position. There was no evidence that the pin had been riveted. It was a simple press fit. So depending on the accuracy of that press fit they only needed to press the pivot pin in and automatically the blades had the right tension.</p>
<p dir="auto">Richard</p>
]]></description><link>https://multitool.ninja/post/86573</link><guid isPermaLink="true">https://multitool.ninja/post/86573</guid><dc:creator><![CDATA[kent ct]]></dc:creator><pubDate>Sun, 08 Jun 2008 15:43:07 GMT</pubDate></item><item><title><![CDATA[Reply to Down Memory Lane on Sun, 08 Jun 2008 08:20:01 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto">@kent ct <a href="/post/86403">said</a>:</p>
<p dir="auto">@micky d <a href="/post/86398">said</a>:</p>
<blockquote>
<p dir="auto">Fine looking folder's mate :), they carry there years very well :)</p>
<p dir="auto">As for restoring it mate :-, I'd give them a bit of a clean and oil, then leave them exactly as they are :). There only original once :)</p>
</blockquote>
<p dir="auto">I'm glad you said that. I think you are right.</p>
<p dir="auto">Richard</p>
</blockquote>
<p dir="auto">Let us know what you decide to do :)</p>
<p dir="auto">Oh and more picture's would be welcome <img src="/assets/uploads/smileys/drool.gif" alt=":drool:" title="drool" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/86519</link><guid isPermaLink="true">https://multitool.ninja/post/86519</guid><dc:creator><![CDATA[Mike, Lord of the Spammers!]]></dc:creator><pubDate>Sun, 08 Jun 2008 08:20:01 GMT</pubDate></item><item><title><![CDATA[Reply to Down Memory Lane on Sun, 08 Jun 2008 00:48:34 GMT]]></title><description><![CDATA[<p dir="auto">I'd either leave it original or send it to a pro to restore- it's far too beautiful to take a chance on ruining as a first project knife.</p>
<p dir="auto">The design seems reminiscent of the Electrician's Knife, which is a pattern many companys use, but Schatt &amp; Morgan is probably the most popular these days:</p>
<p dir="auto"><img src="http://www.allaboutpocketknives.com/wr_case/case_xx_pictures/031-12.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Def</p>
]]></description><link>https://multitool.ninja/post/86435</link><guid isPermaLink="true">https://multitool.ninja/post/86435</guid><dc:creator><![CDATA[Grant Lamontagne]]></dc:creator><pubDate>Sun, 08 Jun 2008 00:48:34 GMT</pubDate></item><item><title><![CDATA[Reply to Down Memory Lane on Sun, 08 Jun 2008 00:14:13 GMT]]></title><description><![CDATA[<p dir="auto">Very interesting Kent. I've seen that pattern of knife before with a number of different tang stamps. Oftentimes I see them on eBay with Klein Tools markings. I wonder if Kutmaster produced the knives for Klein?</p>
<p dir="auto">And about those blades...does the one have a scraper tip, or is that intended as a screwdriver?</p>
]]></description><link>https://multitool.ninja/post/86424</link><guid isPermaLink="true">https://multitool.ninja/post/86424</guid><dc:creator><![CDATA[J-sews]]></dc:creator><pubDate>Sun, 08 Jun 2008 00:14:13 GMT</pubDate></item><item><title><![CDATA[Reply to Down Memory Lane on Sat, 07 Jun 2008 22:42:40 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto">@micky d <a href="/post/86398">said</a>:<br />
Fine looking folder's mate :), they carry there years very well :)</p>
<p dir="auto">As for restoring it mate :-, I'd give them a bit of a clean and oil, then leave them exactly as they are :). There only original once :)</p>
</blockquote>
<p dir="auto">I'm glad you said that. I think you are right.</p>
<p dir="auto">Richard</p>
]]></description><link>https://multitool.ninja/post/86403</link><guid isPermaLink="true">https://multitool.ninja/post/86403</guid><dc:creator><![CDATA[kent ct]]></dc:creator><pubDate>Sat, 07 Jun 2008 22:42:40 GMT</pubDate></item><item><title><![CDATA[Reply to Down Memory Lane on Sat, 07 Jun 2008 22:25:01 GMT]]></title><description><![CDATA[<p dir="auto">Fine looking folder's mate :), they carry there years very well :)</p>
<p dir="auto">As for restoring it mate :-, I'd give them a bit of a clean and oil, then leave them exactly as they are :). There only original once :)</p>
]]></description><link>https://multitool.ninja/post/86398</link><guid isPermaLink="true">https://multitool.ninja/post/86398</guid><dc:creator><![CDATA[Mike, Lord of the Spammers!]]></dc:creator><pubDate>Sat, 07 Jun 2008 22:25:01 GMT</pubDate></item></channel></rss>