<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0"><channel><title><![CDATA[Leatherman quality control.]]></title><description><![CDATA[<p dir="auto">I've been using leathermans for about a year now and i am a bit disappointed because the idea behind there multitools is so well thought out but there quality ruins it.</p>
<p dir="auto">The last 5 leatherman's  iv'e had all sufferd quality control issues.<br />
Most of them where not catastrophic failures but just small thing that annoys the crap out of me.</p>
<p dir="auto">1st leahterman MUT: my first leahterman was the MUT. I've bought it off ebay because it looked cool :)<br />
Didnt had any big problems with it except that the replaceable wire cutters came lose after a week. Put loctite on them and never had the problem again.<br />
And it rusted very quick. the knife, saw and pliers where almost completely brown.<br />
Sold it again via ebay because it was too heavy for EDC and didn't have enough EDC features. MY FAULT :)</p>
<p dir="auto">2 skeletool CX: had pitting in the blade. Probably from a manufacturing defect in the heat treatment/forging of the blade.</p>
<p dir="auto">3 Skeletool CX: send my first skeletool back to the shop and received a new one. The diamond coating was worn of the pocket clip but that really didn't matter to me because my leathermans always get scratched.<br />
After 3 a 4 months i snapped one of the plier jaws of because i tried to break a screw.</p>
<p dir="auto">4 Skeletool CX had to wait about a month when my new Skeletool CX arrived. The pliers broke after a month because i tried to bent a metal strip.</p>
<p dir="auto">5 Supertool 300: i've asked the shop if they could sent me a super tool instead of a new Skeletool CX because i don't want to miss use leather mans excellent warranty by breaking a Skeletool every month.<br />
The super tool file was not profiled correctly. It looked like the machine that profiled te file stopped too early.<br />
So the file was only 75% profiled and the metal saw underside was pretty much useless because the theeth where not deep enough.<br />
As with all my other leathermans the security screws/nuts came loose after a week of use so i had to use dedicated pliers to get one side out and and put loctite on them.<br />
Also the wire cutters came lose.<br />
Sold it via ebay because i don't EDC two multitools.</p>
<p dir="auto">6 Leahterman Rebar: after my nr 4 skeletool CX broke i've immediately ordered a leahterman rebar because i can't go without a multitool and i didn't want to wait for a month again.<br />
The Rebar came with a leather sheath that probably came between something in the production proces because there was some kind of dent in the leather. That wasn't really a problem for me because i had a nice wave style nylon sheath that came with my skeletool CX.<br />
The lock on the plain edge knife side rattled in my pockets and that was very annoying.<br />
It rattled from side to side because the handle was probably not stamped correctly and it rattled up and down because the lock spring didn't reach high enough the reach the lock plate.<br />
I tried to bent the spring up but that didn't work because i couldnt bent it far enough to stay in that position.<br />
When the tools where locked there was up en down play because the holes where the lock sits in where an oval shape. but that wasnt my main problem because that didn't really bother me.<br />
After ater a week of use the security screws came loose so i had to put locktite on them.<br />
All my Skeletools sufferd the same problem.<br />
This thing was pretty much rust free except for the serrated blade that rusted like hell.<br />
And the wire cutters came loose after 2 week also put locktite on the and the problem was fixed.<br />
After 4 months of use the saw broke at the place where the cut out is for your nail.<br />
It would be better if they did the saw and file cut out like the super tool and the blast with a small nick in the end.<br />
It is much stronger and easier to open because it is very hard to open because you have a small leverage.</p>
<p dir="auto">I have nothing bad to say about LM warranty because they've alway replaced my broken LM's.<br />
But the quality issues annoys me a lot.</p>
<p dir="auto">I am 17 years old so i don't know how the quality was for the old Leathermans but from the stories i hear it was a lot better.<br />
I don't live in the USA but i think the quality has much to do with the fact that leahtermans are made outside the USA for the last ten years.<br />
And made in the USA looked cooler :)</p>
<p dir="auto">I've contacted the shop and the've hooked me up with a Brand new Swisstool X.<br />
it was not free and i had to pay 60 euros but i think it was a good deal.<br />
I have chosen for the swisstool because i never saw or heard bad stories about pliers braking, rust, bad quality etc..</p>
<p dir="auto">I expect it in the mail tomorrow.</p>
<p dir="auto">Most of the catastrophic failures with my leathrerman also have to do with my use-missuse.<br />
The quality control was there fault.</p>
<p dir="auto">I am new to <a href="http://multitool.org" rel="nofollow ugc">multitool.org</a> so i don't know if this is in the right category.</p>
<p dir="auto">Are any of you guys experiencing these kind of flaws.<br />
I have a feeling that there arent any good quality leathermans left because my replacement leathermans also had some kind of other flaw.</p>
<p dir="auto">I think that if you want a good leatherman you'll have to look at ebay and get a first gen wave, PST, PST ll etc..<br />
because they don't make them like they used to.</p>
<p dir="auto">And i think there maybe isn't a quality control any more because most of the flaws my leathermans had where pretty easy to spot for the human eye.</p>
<p dir="auto">No leatherman for this guy anymore :(</p>
]]></description><link>https://multitool.ninja/topic/52451/leatherman-quality-control</link><generator>RSS for Node</generator><lastBuildDate>Thu, 19 Nov 2026 00:43:09 GMT</lastBuildDate><atom:link href="https://multitool.ninja/topic/52451.rss" rel="self" type="application/rss+xml"/><pubDate>Tue, 27 May 2014 14:58:51 GMT</pubDate><ttl>60</ttl><item><title><![CDATA[Reply to Leatherman quality control. on Mon, 25 May 2015 02:17:12 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/kampfer" aria-label="Profile: Kampfer">@<bdi>Kampfer</bdi></a> <a href="/post/1093502">said</a>:<br />
Yesterday for the first time I use SOG can opener, what a horrible thing it was!<br />
It opened the can but created a huge mess when doing so.<br />
Maybe I was doing it wrong?  <img src="/assets/uploads/smileys/thinking.gif" alt=":think:" title="Thinking" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">Nope. The SOG can opener is just a complete POS. Search 'Can Opener Test' or 'SOG Can Opener' on these boards. you're not the first to bring up how bad it is.</p>
]]></description><link>https://multitool.ninja/post/1093520</link><guid isPermaLink="true">https://multitool.ninja/post/1093520</guid><dc:creator><![CDATA[Lynn LeFey]]></dc:creator><pubDate>Mon, 25 May 2015 02:17:12 GMT</pubDate></item><item><title><![CDATA[Reply to Leatherman quality control. on Mon, 25 May 2015 01:30:11 GMT]]></title><description><![CDATA[<p dir="auto">Yesterday for the first time I use SOG can opener, what a horrible thing it was!<br />
It opened the can but created a huge mess when doing so.<br />
Maybe I was doing it wrong?  <img src="/assets/uploads/smileys/thinking.gif" alt=":think:" title="Thinking" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1093502</link><guid isPermaLink="true">https://multitool.ninja/post/1093502</guid><dc:creator><![CDATA[Kampfer]]></dc:creator><pubDate>Mon, 25 May 2015 01:30:11 GMT</pubDate></item><item><title><![CDATA[Reply to Leatherman quality control. on Mon, 25 May 2015 01:09:14 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/mercury" aria-label="Profile: Mercury">@<bdi>Mercury</bdi></a> <a href="/post/1093468">said</a>:<br />
SOG has really disappointed me lately, and by lately I mean the last few years.  Their tools just don't do it for me.  They seem to be entirely built around the compound leverage mechanism, and it's like they ran out of R&amp;D money after they came up with that so the rest of the design was thrown together willy nilly.</p>
</blockquote>
<p dir="auto">I was just telling my husband today that it feels to me like SOGs are incredibly well manufactured, and incredibly poorly designed, which is a bad combination. What's the point of flawless execution of poor design? And yes, I'm 100% with the notion that the compound leverage system is very well done. Then everything thing else falls to crap.</p>
]]></description><link>https://multitool.ninja/post/1093498</link><guid isPermaLink="true">https://multitool.ninja/post/1093498</guid><dc:creator><![CDATA[Lynn LeFey]]></dc:creator><pubDate>Mon, 25 May 2015 01:09:14 GMT</pubDate></item><item><title><![CDATA[Reply to Leatherman quality control. on Sun, 24 May 2015 22:34:30 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto">@50ft-trad <a href="/post/1090725">said</a>:<br />
I've said plenty of times before, I have had more than my fair share of quality issues with Leatherman, and actually came to believe for a while that any "B Grade" goods in the factory were destined for overseas sale rather than rejected or rectified. These days I just think they're bloody sloppy  ::) The first two tools I bought of theirs were unquestionably defective (not just design issues), and I have had others since then, and heard of plenty more.</p>
<p dir="auto">I DO NOT associate the brand name with a high quality reliable product!</p>
<p dir="auto">I have several Leatherman tools that I own, like and use. These tend to be older models (from back when they cared about quality), or ones where I have done some modification. If I was to look for a new multitool for someone today the first brands I would consider are Victorinox and Gerber.</p>
<p dir="auto">Victorinox does occasionally let the odd lemon out of the factory, but these are rare. Gerber are more hit and miss with their QA, probably on a par with Leatherman in my opinion, but their tools are often better priced, and generally offer better value for money in my opinion.** As for SOG, my current perspective is that the odds of them getting something right, is about on a par with the odds of Victorinox getting something wrong**.</p>
</blockquote>
<p dir="auto"><img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /></p>
<p dir="auto">SOG has really disappointed me lately, and by lately I mean the last few years.  Their tools just don't do it for me.  They seem to be entirely built around the compound leverage mechanism, and it's like they ran out of R&amp;D money after they came up with that so the rest of the design was thrown together willy nilly.</p>
]]></description><link>https://multitool.ninja/post/1093468</link><guid isPermaLink="true">https://multitool.ninja/post/1093468</guid><dc:creator><![CDATA[Mercury]]></dc:creator><pubDate>Sun, 24 May 2015 22:34:30 GMT</pubDate></item><item><title><![CDATA[Reply to Leatherman quality control. on Fri, 22 May 2015 20:08:59 GMT]]></title><description><![CDATA[<p dir="auto">I'm sure Leatherman must still have all the tooling for past classics.</p>
<p dir="auto">Why don't they re-release??</p>
<p dir="auto">Pretty sure the Genus, Sideclip &amp; Minitool would still sell even today.</p>
]]></description><link>https://multitool.ninja/post/1092637</link><guid isPermaLink="true">https://multitool.ninja/post/1092637</guid><dc:creator><![CDATA[tosh]]></dc:creator><pubDate>Fri, 22 May 2015 20:08:59 GMT</pubDate></item><item><title><![CDATA[Reply to Leatherman quality control. on Fri, 22 May 2015 20:03:28 GMT]]></title><description><![CDATA[<p dir="auto">[/quote]<br />
Dump all the BS MT s and focus on perfecting the wave and Supertool.<br />
[/quote]</p>
<p dir="auto">I'm not sure I'm on board with dump everything, but a strong focus on the 2 flagship offerings to bring them to a quality level on par with Vic would be a great idea.</p>
<p dir="auto">Sent from my iPad using Tapatalk</p>
]]></description><link>https://multitool.ninja/post/1092633</link><guid isPermaLink="true">https://multitool.ninja/post/1092633</guid><dc:creator><![CDATA[BASguy]]></dc:creator><pubDate>Fri, 22 May 2015 20:03:28 GMT</pubDate></item><item><title><![CDATA[Reply to Leatherman quality control. on Fri, 22 May 2015 19:58:50 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto">@Lynn LeFey <a href="/post/1092220">said</a>:<br />
I was about to say "The Wave doesn't cost $90."</p>
<p dir="auto">But, my benchmark price for it, at Home Depot, yep. Wow. When the smurf did THAT happen?</p>
<p dir="auto">I guess that shows how close i pay attention to retail prices of full size tools.  <img src="/assets/uploads/smileys/shrug.gif" alt=":shrug:" title="Shrug" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">I was curious as to why you didn't think price was an issue in your comments?  Now it makes sense.....</p>
<p dir="auto">Sent from my iPad using Tapatalk</p>
]]></description><link>https://multitool.ninja/post/1092630</link><guid isPermaLink="true">https://multitool.ninja/post/1092630</guid><dc:creator><![CDATA[BASguy]]></dc:creator><pubDate>Fri, 22 May 2015 19:58:50 GMT</pubDate></item><item><title><![CDATA[Reply to Leatherman quality control. on Fri, 22 May 2015 16:22:21 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/sawman" aria-label="Profile: sawman">@<bdi>sawman</bdi></a> <a href="/post/1092470">said</a>:</p>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/anditsgone" aria-label="Profile: anditsgone">@<bdi>anditsgone</bdi></a> <a href="/post/1092469">said</a>:</p>
<blockquote></blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/sawman" aria-label="Profile: sawman">@<bdi>sawman</bdi></a> <a href="/post/1092465">said</a>:</p>
<blockquote>
<blockquote>
<p dir="auto">I found a perfect word to describe LM.</p>
<p dir="auto">INCONSISTENT.</p>
<p dir="auto">They will produce a complete work of genius like the Raptor, then turn around and produce the Rev which takes away the OHO and gives you a smurfty tool. And what's up with the watch tool (I forget right off what it's called) with the bracelet of bits. REDICULOUS!!!</p>
</blockquote>
<p dir="auto">I think we are looking at a company that is trying to make more profit.<br />
Tim leatherman idea was create good and affordable product, and create a good working environment and sustainable jobs.<br />
And at the end cover all the costs.<br />
Basically non-profit minded.</p>
<p dir="auto">Now we are throwing out the good affordable tools idea, and get more profit.<br />
We are getting crapy quality tools, the workers at leatherman will probably not get an higher salary. But the management will get a better salary.</p>
</blockquote>
<p dir="auto">If I didn't care about the future of LM, I suppose I wouldn't get so worked up about it. I sincerely hope they can get back on track. I love some of their products and don't want to see them go out of business.</p>
</blockquote>
<p dir="auto">I stand behind you.<br />
I hate that i can not support and recommend a company that i love.</p>
]]></description><link>https://multitool.ninja/post/1092472</link><guid isPermaLink="true">https://multitool.ninja/post/1092472</guid><dc:creator><![CDATA[anditsgone]]></dc:creator><pubDate>Fri, 22 May 2015 16:22:21 GMT</pubDate></item><item><title><![CDATA[Reply to Leatherman quality control. on Fri, 22 May 2015 16:19:34 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/anditsgone" aria-label="Profile: anditsgone">@<bdi>anditsgone</bdi></a> <a href="/post/1092469">said</a>:</p>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/sawman" aria-label="Profile: sawman">@<bdi>sawman</bdi></a> <a href="/post/1092465">said</a>:</p>
<blockquote>
<p dir="auto">I found a perfect word to describe LM.</p>
<p dir="auto">INCONSISTENT.</p>
<p dir="auto">They will produce a complete work of genius like the Raptor, then turn around and produce the Rev which takes away the OHO and gives you a smurfty tool. And what's up with the watch tool (I forget right off what it's called) with the bracelet of bits. REDICULOUS!!!</p>
</blockquote>
<p dir="auto">I think we are looking at a company that is trying to make more profit.<br />
Tim leatherman idea was create good and affordable product, and create a good working environment and sustainable jobs.<br />
And at the end cover all the costs.<br />
Basically non-profit minded.</p>
<p dir="auto">Now we are throwing out the good affordable tools idea, and get more profit.<br />
We are getting crapy quality tools, the workers at leatherman will probably not get an higher salary. But the management will get a better salary.</p>
</blockquote>
<p dir="auto">If I didn't care about the future of LM, I suppose I wouldn't get so worked up about it. I sincerely hope they can get back on track. I love some of their products and don't want to see them go out of business.</p>
]]></description><link>https://multitool.ninja/post/1092470</link><guid isPermaLink="true">https://multitool.ninja/post/1092470</guid><dc:creator><![CDATA[sawman]]></dc:creator><pubDate>Fri, 22 May 2015 16:19:34 GMT</pubDate></item><item><title><![CDATA[Reply to Leatherman quality control. on Fri, 22 May 2015 16:15:52 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/sawman" aria-label="Profile: sawman">@<bdi>sawman</bdi></a> <a href="/post/1092465">said</a>:<br />
I found a perfect word to describe LM.</p>
<p dir="auto">INCONSISTENT.</p>
<p dir="auto">They will produce a complete work of genius like the Raptor, then turn around and produce the Rev which takes away the OHO and gives you a smurfty tool. And what's up with the watch tool (I forget right off what it's called) with the bracelet of bits. REDICULOUS!!!</p>
</blockquote>
<p dir="auto">I think we are looking at a company that is trying to make more profit.<br />
Tim leatherman idea was create good and affordable product, and create a good working environment and sustainable jobs.<br />
And at the end cover all the costs.<br />
Basically non-profit minded.</p>
<p dir="auto">Now we are throwing out the good affordable tools idea, and get more profit.<br />
We are getting crapy quality tools, the workers at leatherman will probably not get an higher salary. But the management will get a better salary.</p>
]]></description><link>https://multitool.ninja/post/1092469</link><guid isPermaLink="true">https://multitool.ninja/post/1092469</guid><dc:creator><![CDATA[anditsgone]]></dc:creator><pubDate>Fri, 22 May 2015 16:15:52 GMT</pubDate></item><item><title><![CDATA[Reply to Leatherman quality control. on Fri, 22 May 2015 16:07:33 GMT]]></title><description><![CDATA[<p dir="auto">I found a perfect word to describe LM.</p>
<p dir="auto">INCONSISTENT.</p>
<p dir="auto">They will produce a complete work of genius like the Raptor, then turn around and produce the Rev which takes away the OHO and gives you a smurfty tool. And what's up with the watch tool (I forget right off what it's called) with the bracelet of bits. REDICULOUS!!!</p>
]]></description><link>https://multitool.ninja/post/1092465</link><guid isPermaLink="true">https://multitool.ninja/post/1092465</guid><dc:creator><![CDATA[sawman]]></dc:creator><pubDate>Fri, 22 May 2015 16:07:33 GMT</pubDate></item><item><title><![CDATA[Reply to Leatherman quality control. on Fri, 22 May 2015 10:24:53 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/tosh" aria-label="Profile: tosh">@<bdi>tosh</bdi></a> <a href="/post/1092238">said</a>:<br />
A very interesting thread...</p>
<p dir="auto">I think there is a fine line between  trying new ideas and blatantly cost cutting.<br />
I agree whole heartedly that the early LM's were something special. But I also think some of the later ideas....MUT, OHT should be applauded too.</p>
<p dir="auto">However, there is no denying that the overall quality has gone drastically downhill and it really does seem to be since Tim Leatherman left the driving seat.</p>
<p dir="auto">Hopefully when sales begin to fall on LM's new stuff maybe then Leatherman will realise their mistake.</p>
<p dir="auto">Personally I couldn't care less, if they (Leatherman) or indeed any of the MT/SAK manufacturers want to churn out crap, then churn it out!!<br />
I don't have to buy it......and I won't!!</p>
</blockquote>
<p dir="auto">I don't care about the other the sport multi tools either. But i do think this idea will cost lm money. No skater will buy one. And it is too expensive.<br />
It is the same with the MUT.<br />
But i can see that the raptor is a good idea.</p>
<p dir="auto">Probably the reason why Vic doesn't make that kind of mt or saks.<br />
I like the idea of don't have allot of options, but the options you have are prefect assembled and flawless qc over the loads of options but all poor quality.</p>
<p dir="auto">Dump all the BS MT s and focus on perfecting the wave and Supertool.</p>
]]></description><link>https://multitool.ninja/post/1092311</link><guid isPermaLink="true">https://multitool.ninja/post/1092311</guid><dc:creator><![CDATA[anditsgone]]></dc:creator><pubDate>Fri, 22 May 2015 10:24:53 GMT</pubDate></item><item><title><![CDATA[Reply to Leatherman quality control. on Fri, 22 May 2015 06:44:01 GMT]]></title><description><![CDATA[<p dir="auto">A very interesting thread...</p>
<p dir="auto">I think there is a fine line between  trying new ideas and blatantly cost cutting.<br />
I agree whole heartedly that the early LM's were something special. But I also think some of the later ideas....MUT, OHT should be applauded too.</p>
<p dir="auto">However, there is no denying that the overall quality has gone drastically downhill and it really does seem to be since Tim Leatherman left the driving seat.</p>
<p dir="auto">Hopefully when sales begin to fall on LM's new stuff maybe then Leatherman will realise their mistake.</p>
<p dir="auto">Personally I couldn't care less, if they (Leatherman) or indeed any of the MT/SAK manufacturers want to churn out crap, then churn it out!!<br />
I don't have to buy it......and I won't!!</p>
]]></description><link>https://multitool.ninja/post/1092238</link><guid isPermaLink="true">https://multitool.ninja/post/1092238</guid><dc:creator><![CDATA[tosh]]></dc:creator><pubDate>Fri, 22 May 2015 06:44:01 GMT</pubDate></item><item><title><![CDATA[Reply to Leatherman quality control. on Fri, 22 May 2015 06:02:00 GMT]]></title><description><![CDATA[<p dir="auto">Here are some, cheap for me, prices from Austria, in some regular shops.</p>
<p dir="auto">In many ways, with the dollar getting stronger, these prices may not appear as high, to US members as they actually are or "feel" to us lot.</p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/192722_IMG_0033.JPG" alt="IMG_0033.JPG" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/192724_IMG_0033-001.JPG" alt="IMG_0033-001.JPG" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/192726_IMG_0116.JPG" alt="IMG_0116.JPG" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/192728_IMG_0116-001.JPG" alt="IMG_0116-001.JPG" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/1092232</link><guid isPermaLink="true">https://multitool.ninja/post/1092232</guid><dc:creator><![CDATA[dks]]></dc:creator><pubDate>Fri, 22 May 2015 06:02:00 GMT</pubDate></item><item><title><![CDATA[Reply to Leatherman quality control. on Fri, 22 May 2015 05:43:55 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto">@Lynn LeFey <a href="/post/1092220">said</a>:<br />
I was about to say "The Wave doesn't cost $90."</p>
<p dir="auto">But, my benchmark price for it, at Home Depot, yep. Wow. When the smurf did THAT happen?</p>
<p dir="auto">I guess that shows how close i pay attention to retail prices of full size tools.  <img src="/assets/uploads/smileys/shrug.gif" alt=":shrug:" title="Shrug" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">All of the Waves on Amazon are $90 as well. Kind of crazy.  :ahhh :D</p>
]]></description><link>https://multitool.ninja/post/1092228</link><guid isPermaLink="true">https://multitool.ninja/post/1092228</guid><dc:creator><![CDATA[captain spaulding]]></dc:creator><pubDate>Fri, 22 May 2015 05:43:55 GMT</pubDate></item><item><title><![CDATA[Reply to Leatherman quality control. on Fri, 22 May 2015 04:53:20 GMT]]></title><description><![CDATA[<p dir="auto">I was about to say "The Wave doesn't cost $90."</p>
<p dir="auto">But, my benchmark price for it, at Home Depot, yep. Wow. When the smurf did THAT happen?</p>
<p dir="auto">I guess that shows how close i pay attention to retail prices of full size tools.  <img src="/assets/uploads/smileys/shrug.gif" alt=":shrug:" title="Shrug" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1092220</link><guid isPermaLink="true">https://multitool.ninja/post/1092220</guid><dc:creator><![CDATA[Lynn LeFey]]></dc:creator><pubDate>Fri, 22 May 2015 04:53:20 GMT</pubDate></item><item><title><![CDATA[Reply to Leatherman quality control. on Fri, 22 May 2015 04:01:45 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/basguy" aria-label="Profile: BASguy">@<bdi>BASguy</bdi></a> <a href="/post/1092210">said</a>:<br />
I just don't think (here in the land of the free anyway) that Leatherman is to overpriced on their tools, it's just that the prices have risen in recent years almost in proportion to the decline in quality.</p>
<p dir="auto">Sent from my iPhone using Tapatalk</p>
</blockquote>
<p dir="auto">That's the thing that really gets me. The quality declining while the price is rising. Makes me feel like I am getting shafted six ways from Sunday. Its not like the prices rose slightly either. $60 to $90 for a Wave is substantial. That's roughly a 30% or more increase (I think). I never was great at math.</p>
]]></description><link>https://multitool.ninja/post/1092217</link><guid isPermaLink="true">https://multitool.ninja/post/1092217</guid><dc:creator><![CDATA[captain spaulding]]></dc:creator><pubDate>Fri, 22 May 2015 04:01:45 GMT</pubDate></item><item><title><![CDATA[Reply to Leatherman quality control. on Fri, 22 May 2015 03:47:25 GMT]]></title><description><![CDATA[<p dir="auto">I just don't think (here in the land of the free anyway) that Leatherman is to overpriced on their tools, it's just that the prices have risen in recent years almost in proportion to the decline in quality.</p>
<p dir="auto">Sent from my iPhone using Tapatalk</p>
]]></description><link>https://multitool.ninja/post/1092210</link><guid isPermaLink="true">https://multitool.ninja/post/1092210</guid><dc:creator><![CDATA[BASguy]]></dc:creator><pubDate>Fri, 22 May 2015 03:47:25 GMT</pubDate></item><item><title><![CDATA[Reply to Leatherman quality control. on Fri, 22 May 2015 03:02:53 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto">@captain spaulding <a href="/post/1092188">said</a>:</p>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/demel" aria-label="Profile: Demel">@<bdi>Demel</bdi></a> <a href="/post/1092185">said</a>:</p>
<blockquote></blockquote>
<p dir="auto">@captain spaulding <a href="/post/1092180">said</a>:</p>
<blockquote>
<blockquote></blockquote>
</blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/demel" aria-label="Profile: Demel">@<bdi>Demel</bdi></a> <a href="/post/1092173">said</a>:</p>
<blockquote>
<blockquote>
<blockquote>
<p dir="auto">[quote author=BASguy link=topic=52451.msg1092154#msg1092154 date=1432258685]</p>
<p dir="auto">[quote author=sawman link=topic=52451.msg1091864#msg1091864 date=1432224176]<br />
I don't know where you get your prices, but a lot of places charge retail which is too high for an unchecked tool*</p>
<p dir="auto">I think it's absolutely appalling that LM is selling for such high prices overseas where the poor customer is likely to get a poor/bad tool. Down right dispickable if you ask me.</p>
<p dir="auto">Furthermore, if they put half as much effort into ensuring a proper tool as they do into making sure none-shall-enter their theft-proof packing, we wouldn't be having this discussion.</p>
<ul>
<li>unchecked tool - a tool with no QC or oversite before going on to packaging.</li>
</ul>
</blockquote>
<p dir="auto">I just can't see the sense in ordering a NIP Leatherman product anymore.  It's a gamble you will get a tool you're satisfied with.  I'm not sure their prices are high, but it's absolutely clear their quality is diminished, so arguing that point is almost nonsense anymore.  I will say that if the $120 MSRP on their new toy whistle is an indicator, they are clearly headed in the wrong direction with their foot on the gas......</p>
<p dir="auto">Sent from my iPhone using Tapatalk</p>
</blockquote>
<p dir="auto">They are overpriced. $50 for a skeletool, $90 for a wave where I'm at. To me that's a bit much. <strong>Although the rebar is available for 55 which is nice</strong>. As far as quality control goes I don't like them giving refurbed tools for warranty. Sent some tools to Gerber and they sent nib tools back to me. I got two bad waves from LM and decided it wasn't worth sending one in for a third. I agree with lynn, Leatherman is a few steps behind Victorinox in the qc department, but they are ahead of their competitors in terms of options.</p>
</blockquote>
<p dir="auto">I would not pay $55 for a Rebar. I know the overseas members would love a Rebar for $55, but when they came out they were $35-$40. Waves used to be $55-$60 on Amazon all day. Cheaper if they were on sale.</p>
</blockquote>
<p dir="auto">I didn't know they were that cheap. What is driving their prices up? How much is a rebar in the uk?<br />
[/quote]</p>
<p dir="auto">Probably Leatherman losing money on their other models that don't sell well so they have to make it up by reaching in your pocket.  <img src="/assets/uploads/smileys/rofl.gif" alt=":rofl:" title="rofl" class="forum-smiley emoji" /></p>
<p dir="auto">In all seriousness i'm not sure.<br />
[/quote]<br />
Who knows...they could always outsource production to mars. They are trying to reach new markets. [emoji1]</p>
]]></description><link>https://multitool.ninja/post/1092194</link><guid isPermaLink="true">https://multitool.ninja/post/1092194</guid><dc:creator><![CDATA[Demel]]></dc:creator><pubDate>Fri, 22 May 2015 03:02:53 GMT</pubDate></item><item><title><![CDATA[Reply to Leatherman quality control. on Fri, 22 May 2015 02:49:59 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/demel" aria-label="Profile: Demel">@<bdi>Demel</bdi></a> <a href="/post/1092185">said</a>:</p>
<p dir="auto">@captain spaulding <a href="/post/1092180">said</a>:</p>
<blockquote></blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/demel" aria-label="Profile: Demel">@<bdi>Demel</bdi></a> <a href="/post/1092173">said</a>:</p>
<blockquote>
<blockquote></blockquote>
</blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/basguy" aria-label="Profile: BASguy">@<bdi>BASguy</bdi></a> <a href="/post/1092154">said</a>:</p>
<blockquote>
<blockquote>
<blockquote>
<p dir="auto">[quote author=sawman link=topic=52451.msg1091864#msg1091864 date=1432224176]<br />
I don't know where you get your prices, but a lot of places charge retail which is too high for an unchecked tool*</p>
<p dir="auto">I think it's absolutely appalling that LM is selling for such high prices overseas where the poor customer is likely to get a poor/bad tool. Down right dispickable if you ask me.</p>
<p dir="auto">Furthermore, if they put half as much effort into ensuring a proper tool as they do into making sure none-shall-enter their theft-proof packing, we wouldn't be having this discussion.</p>
<ul>
<li>unchecked tool - a tool with no QC or oversite before going on to packaging.</li>
</ul>
</blockquote>
<p dir="auto">I just can't see the sense in ordering a NIP Leatherman product anymore.  It's a gamble you will get a tool you're satisfied with.  I'm not sure their prices are high, but it's absolutely clear their quality is diminished, so arguing that point is almost nonsense anymore.  I will say that if the $120 MSRP on their new toy whistle is an indicator, they are clearly headed in the wrong direction with their foot on the gas......</p>
<p dir="auto">Sent from my iPhone using Tapatalk</p>
</blockquote>
<p dir="auto">They are overpriced. $50 for a skeletool, $90 for a wave where I'm at. To me that's a bit much. <strong>Although the rebar is available for 55 which is nice</strong>. As far as quality control goes I don't like them giving refurbed tools for warranty. Sent some tools to Gerber and they sent nib tools back to me. I got two bad waves from LM and decided it wasn't worth sending one in for a third. I agree with lynn, Leatherman is a few steps behind Victorinox in the qc department, but they are ahead of their competitors in terms of options.</p>
</blockquote>
<p dir="auto">I would not pay $55 for a Rebar. I know the overseas members would love a Rebar for $55, but when they came out they were $35-$40. Waves used to be $55-$60 on Amazon all day. Cheaper if they were on sale.</p>
</blockquote>
<p dir="auto">I didn't know they were that cheap. What is driving their prices up? How much is a rebar in the uk?<br />
[/quote]</p>
<p dir="auto">Probably Leatherman losing money on their other models that don't sell well so they have to make it up by reaching in your pocket.  <img src="/assets/uploads/smileys/rofl.gif" alt=":rofl:" title="rofl" class="forum-smiley emoji" /></p>
<p dir="auto">In all seriousness i'm not sure.</p>
]]></description><link>https://multitool.ninja/post/1092188</link><guid isPermaLink="true">https://multitool.ninja/post/1092188</guid><dc:creator><![CDATA[captain spaulding]]></dc:creator><pubDate>Fri, 22 May 2015 02:49:59 GMT</pubDate></item><item><title><![CDATA[Reply to Leatherman quality control. on Fri, 22 May 2015 02:47:08 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto">@captain spaulding <a href="/post/1092180">said</a>:</p>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/demel" aria-label="Profile: Demel">@<bdi>Demel</bdi></a> <a href="/post/1092173">said</a>:</p>
<blockquote></blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/basguy" aria-label="Profile: BASguy">@<bdi>BASguy</bdi></a> <a href="/post/1092154">said</a>:</p>
<blockquote>
<blockquote></blockquote>
</blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/sawman" aria-label="Profile: sawman">@<bdi>sawman</bdi></a> <a href="/post/1091864">said</a>:</p>
<blockquote>
<blockquote>
<blockquote>
<p dir="auto">I don't know where you get your prices, but a lot of places charge retail which is too high for an unchecked tool*</p>
<p dir="auto">I think it's absolutely appalling that LM is selling for such high prices overseas where the poor customer is likely to get a poor/bad tool. Down right dispickable if you ask me.</p>
<p dir="auto">Furthermore, if they put half as much effort into ensuring a proper tool as they do into making sure none-shall-enter their theft-proof packing, we wouldn't be having this discussion.</p>
<ul>
<li>unchecked tool - a tool with no QC or oversite before going on to packaging.</li>
</ul>
</blockquote>
<p dir="auto">I just can't see the sense in ordering a NIP Leatherman product anymore.  It's a gamble you will get a tool you're satisfied with.  I'm not sure their prices are high, but it's absolutely clear their quality is diminished, so arguing that point is almost nonsense anymore.  I will say that if the $120 MSRP on their new toy whistle is an indicator, they are clearly headed in the wrong direction with their foot on the gas......</p>
<p dir="auto">Sent from my iPhone using Tapatalk</p>
</blockquote>
<p dir="auto">They are overpriced. $50 for a skeletool, $90 for a wave where I'm at. To me that's a bit much. <strong>Although the rebar is available for 55 which is nice</strong>. As far as quality control goes I don't like them giving refurbed tools for warranty. Sent some tools to Gerber and they sent nib tools back to me. I got two bad waves from LM and decided it wasn't worth sending one in for a third. I agree with lynn, Leatherman is a few steps behind Victorinox in the qc department, but they are ahead of their competitors in terms of options.</p>
</blockquote>
<p dir="auto">I would not pay $55 for a Rebar. I know the overseas members would love a Rebar for $55, but when they came out they were $35-$40. Waves used to be $55-$60 on Amazon all day. Cheaper if they were on sale.</p>
</blockquote>
<p dir="auto">I didn't know they were that cheap. What is driving their prices up? How much is a rebar in the uk?</p>
]]></description><link>https://multitool.ninja/post/1092185</link><guid isPermaLink="true">https://multitool.ninja/post/1092185</guid><dc:creator><![CDATA[Demel]]></dc:creator><pubDate>Fri, 22 May 2015 02:47:08 GMT</pubDate></item><item><title><![CDATA[Reply to Leatherman quality control. on Fri, 22 May 2015 02:43:19 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/demel" aria-label="Profile: Demel">@<bdi>Demel</bdi></a> <a href="/post/1092173">said</a>:</p>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/basguy" aria-label="Profile: BASguy">@<bdi>BASguy</bdi></a> <a href="/post/1092154">said</a>:</p>
<blockquote></blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/sawman" aria-label="Profile: sawman">@<bdi>sawman</bdi></a> <a href="/post/1091864">said</a>:</p>
<blockquote>
<blockquote>
<p dir="auto">I don't know where you get your prices, but a lot of places charge retail which is too high for an unchecked tool*</p>
<p dir="auto">I think it's absolutely appalling that LM is selling for such high prices overseas where the poor customer is likely to get a poor/bad tool. Down right dispickable if you ask me.</p>
<p dir="auto">Furthermore, if they put half as much effort into ensuring a proper tool as they do into making sure none-shall-enter their theft-proof packing, we wouldn't be having this discussion.</p>
<ul>
<li>unchecked tool - a tool with no QC or oversite before going on to packaging.</li>
</ul>
</blockquote>
<p dir="auto">I just can't see the sense in ordering a NIP Leatherman product anymore.  It's a gamble you will get a tool you're satisfied with.  I'm not sure their prices are high, but it's absolutely clear their quality is diminished, so arguing that point is almost nonsense anymore.  I will say that if the $120 MSRP on their new toy whistle is an indicator, they are clearly headed in the wrong direction with their foot on the gas......</p>
<p dir="auto">Sent from my iPhone using Tapatalk</p>
</blockquote>
<p dir="auto">They are overpriced. $50 for a skeletool, $90 for a wave where I'm at. To me that's a bit much. <strong>Although the rebar is available for 55 which is nice</strong>. As far as quality control goes I don't like them giving refurbed tools for warranty. Sent some tools to Gerber and they sent nib tools back to me. I got two bad waves from LM and decided it wasn't worth sending one in for a third. I agree with lynn, Leatherman is a few steps behind Victorinox in the qc department, but they are ahead of their competitors in terms of options.</p>
</blockquote>
<p dir="auto">I would not pay $55 for a Rebar. I know the overseas members would love a Rebar for $55, but when they came out they were $35-$40. Waves used to be $55-$60 on Amazon all day. Cheaper if they were on sale.</p>
]]></description><link>https://multitool.ninja/post/1092180</link><guid isPermaLink="true">https://multitool.ninja/post/1092180</guid><dc:creator><![CDATA[captain spaulding]]></dc:creator><pubDate>Fri, 22 May 2015 02:43:19 GMT</pubDate></item><item><title><![CDATA[Reply to Leatherman quality control. on Fri, 22 May 2015 02:36:30 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/basguy" aria-label="Profile: BASguy">@<bdi>BASguy</bdi></a> <a href="/post/1092154">said</a>:</p>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/sawman" aria-label="Profile: sawman">@<bdi>sawman</bdi></a> <a href="/post/1091864">said</a>:</p>
<blockquote>
<p dir="auto">I don't know where you get your prices, but a lot of places charge retail which is too high for an unchecked tool*</p>
<p dir="auto">I think it's absolutely appalling that LM is selling for such high prices overseas where the poor customer is likely to get a poor/bad tool. Down right dispickable if you ask me.</p>
<p dir="auto">Furthermore, if they put half as much effort into ensuring a proper tool as they do into making sure none-shall-enter their theft-proof packing, we wouldn't be having this discussion.</p>
<ul>
<li>unchecked tool - a tool with no QC or oversite before going on to packaging.</li>
</ul>
</blockquote>
<p dir="auto">I just can't see the sense in ordering a NIP Leatherman product anymore.  It's a gamble you will get a tool you're satisfied with.  I'm not sure their prices are high, but it's absolutely clear their quality is diminished, so arguing that point is almost nonsense anymore.  I will say that if the $120 MSRP on their new toy whistle is an indicator, they are clearly headed in the wrong direction with their foot on the gas......</p>
<p dir="auto">Sent from my iPhone using Tapatalk</p>
</blockquote>
<p dir="auto">They are overpriced. $50 for a skeletool, $90 for a wave where I'm at. To me that's a bit much. Although the rebar is available for 55 which is nice. As far as quality control goes I don't like them giving refurbed tools for warranty. Sent some tools to Gerber and they sent nib tools back to me. I got two bad waves from LM and decided it wasn't worth sending one in for a third. I agree with lynn, Leatherman is a few steps behind Victorinox in the qc department, but they are ahead of their competitors in terms of options.</p>
]]></description><link>https://multitool.ninja/post/1092173</link><guid isPermaLink="true">https://multitool.ninja/post/1092173</guid><dc:creator><![CDATA[Demel]]></dc:creator><pubDate>Fri, 22 May 2015 02:36:30 GMT</pubDate></item><item><title><![CDATA[Reply to Leatherman quality control. on Fri, 22 May 2015 01:38:05 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/sawman" aria-label="Profile: sawman">@<bdi>sawman</bdi></a> <a href="/post/1091864">said</a>:<br />
I don't know where you get your prices, but a lot of places charge retail which is too high for an unchecked tool*</p>
<p dir="auto">I think it's absolutely appalling that LM is selling for such high prices overseas where the poor customer is likely to get a poor/bad tool. Down right dispickable if you ask me.</p>
<p dir="auto">Furthermore, if they put half as much effort into ensuring a proper tool as they do into making sure none-shall-enter their theft-proof packing, we wouldn't be having this discussion.</p>
<ul>
<li>unchecked tool - a tool with no QC or oversite before going on to packaging.</li>
</ul>
</blockquote>
<p dir="auto">I just can't see the sense in ordering a NIP Leatherman product anymore.  It's a gamble you will get a tool you're satisfied with.  I'm not sure their prices are high, but it's absolutely clear their quality is diminished, so arguing that point is almost nonsense anymore.  I will say that if the $120 MSRP on their new toy whistle is an indicator, they are clearly headed in the wrong direction with their foot on the gas......</p>
<p dir="auto">Sent from my iPhone using Tapatalk</p>
]]></description><link>https://multitool.ninja/post/1092154</link><guid isPermaLink="true">https://multitool.ninja/post/1092154</guid><dc:creator><![CDATA[BASguy]]></dc:creator><pubDate>Fri, 22 May 2015 01:38:05 GMT</pubDate></item></channel></rss>