<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0"><channel><title><![CDATA[Closing Leatherman Rebar with awl out causes pliers to jam.]]></title><description><![CDATA[<p dir="auto">Howdy.</p>
<p dir="auto">Just trying to figure out if this is my Rebar having a fit problem or if it's in the design.</p>
<p dir="auto">When the awl is out on the Leatherman Rebar, if you close the pliers head and tuck it into one handle or the other, then close, it closes fine.</p>
<p dir="auto">If you "sandwich" the handles around the pliers head, the pliers jam. Is this just my Rebar and I should contact Leatherman or is this pretty common? Google searches didn't yield me any results.</p>
<p dir="auto">Picture #1 shows the fashion of closing that allows it to close properly. Picture #2 shows the "sandwich" effect I mentioned that causes the pliers to jam in the handle.</p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/123992_unnamed.jpg" alt="unnamed.jpg" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/123994_unnamed1.jpg" alt="unnamed1.jpg" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/topic/52615/closing-leatherman-rebar-with-awl-out-causes-pliers-to-jam</link><generator>RSS for Node</generator><lastBuildDate>Thu, 19 Nov 2026 00:43:03 GMT</lastBuildDate><atom:link href="https://multitool.ninja/topic/52615.rss" rel="self" type="application/rss+xml"/><pubDate>Wed, 04 Jun 2014 14:45:06 GMT</pubDate><ttl>60</ttl><item><title><![CDATA[Reply to Closing Leatherman Rebar with awl out causes pliers to jam. on Fri, 20 Jun 2014 18:06:53 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/rux" aria-label="Profile: WildJ3">@<bdi>WildJ3</bdi></a> <a href="/post/903951">said</a>:<br />
Just got the replacement Rebar from LM tool group.<br />
I can't even force this thing to jam. The pliers naturally close on the side opposite the awl now but even forcing it to the other side, the tool closes shut when sandwiching rather than wedging between those flat drivers. Some type of tolerance issue must have occurred.<br />
LM gave me a paid shipping label back and replaced my new Rebar with another new Rebar. Can't say enough about LM customer service.</p>
</blockquote>
<p dir="auto">You couldn't ask for better customer service.</p>
]]></description><link>https://multitool.ninja/post/904003</link><guid isPermaLink="true">https://multitool.ninja/post/904003</guid><dc:creator><![CDATA[toolguy]]></dc:creator><pubDate>Fri, 20 Jun 2014 18:06:53 GMT</pubDate></item><item><title><![CDATA[Reply to Closing Leatherman Rebar with awl out causes pliers to jam. on Fri, 20 Jun 2014 16:02:11 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/rux" aria-label="Profile: WildJ3">@<bdi>WildJ3</bdi></a> <a href="/post/903951">said</a>:<br />
Just got the replacement Rebar from LM tool group.</p>
<p dir="auto">I can't even force this thing to jam. The pliers naturally close on the side opposite the awl now but even forcing it to the other side, the tool closes shut when sandwiching rather than wedging between those flat drivers. Some type of tolerance issue must have occurred.</p>
<p dir="auto">LM gave me a paid shipping label back and replaced my new Rebar with another new Rebar. Can't say enough about LM customer service.</p>
</blockquote>
<p dir="auto">Glad it all panned out <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/903954</link><guid isPermaLink="true">https://multitool.ninja/post/903954</guid><dc:creator><![CDATA[sawman]]></dc:creator><pubDate>Fri, 20 Jun 2014 16:02:11 GMT</pubDate></item><item><title><![CDATA[Reply to Closing Leatherman Rebar with awl out causes pliers to jam. on Fri, 20 Jun 2014 15:49:16 GMT]]></title><description><![CDATA[<p dir="auto">Just got the replacement Rebar from LM tool group.</p>
<p dir="auto">I can't even force this thing to jam. The pliers naturally close on the side opposite the awl now but even forcing it to the other side, the tool closes shut when sandwiching rather than wedging between those flat drivers. Some type of tolerance issue must have occurred.</p>
<p dir="auto">LM gave me a paid shipping label back and replaced my new Rebar with another new Rebar. Can't say enough about LM customer service.</p>
]]></description><link>https://multitool.ninja/post/903951</link><guid isPermaLink="true">https://multitool.ninja/post/903951</guid><dc:creator><![CDATA[Rux]]></dc:creator><pubDate>Fri, 20 Jun 2014 15:49:16 GMT</pubDate></item><item><title><![CDATA[Reply to Closing Leatherman Rebar with awl out causes pliers to jam. on Mon, 16 Jun 2014 00:50:28 GMT]]></title><description><![CDATA[<p dir="auto">Not an issue with my stainless but this does remind me of the old joke:</p>
<p dir="auto">Patient:  Doctor, it hurts every time I do this.<br />
Doctor:  Then don't do that.</p>
]]></description><link>https://multitool.ninja/post/902262</link><guid isPermaLink="true">https://multitool.ninja/post/902262</guid><dc:creator><![CDATA[Roche]]></dc:creator><pubDate>Mon, 16 Jun 2014 00:50:28 GMT</pubDate></item><item><title><![CDATA[Reply to Closing Leatherman Rebar with awl out causes pliers to jam. on Sun, 15 Jun 2014 13:27:00 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/sawman" aria-label="Profile: sawman">@<bdi>sawman</bdi></a> <a href="/post/901802">said</a>:<br />
I wonder if they'll add a metal tab inside like they did on the Wave to prevent it from jamming.  <img src="/assets/uploads/smileys/thinking.gif" alt=":think:" title="Thinking" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">My Rebar pliers jam every single time. Period. People suggesting I'm doing it wrong, or "forcing" it, well that's not the case. I open the tool, deploy the awl, close it. Pliers wedge right between the flat drivers. Every time, all day, every day.</p>
<p dir="auto">The only way to not have it jam was to open the tool, deploy the awl, intentionally close the pliers on the opposite side first, and then close the tool. This felt very wonky to me. Maybe I'm just spoiled on my Wave never jamming and just closing it.</p>
<p dir="auto">They were unable to reproduce the issue with their models on hand. For some reason, my Rebar in my hands did it every time. I don't care if others weren't having the issue, my specific one naturally goes for the awl side and wedges one end of the pliers right in those flat drivers.</p>
<p dir="auto">They offered an even swap as this was a brand new tool and they wanted to see the issue themselves. They even provided a paid shipping label.</p>
<p dir="auto">I opted to send it them. If it does it repeatedly for them as it did for me, and it will allow a design change (implementing the metal tab like on the Wave), I'm all for it to improve future models.</p>
]]></description><link>https://multitool.ninja/post/902032</link><guid isPermaLink="true">https://multitool.ninja/post/902032</guid><dc:creator><![CDATA[Rux]]></dc:creator><pubDate>Sun, 15 Jun 2014 13:27:00 GMT</pubDate></item><item><title><![CDATA[Reply to Closing Leatherman Rebar with awl out causes pliers to jam. on Sat, 14 Jun 2014 16:45:57 GMT]]></title><description><![CDATA[<p dir="auto">I wonder if they'll add a metal tab inside like they did on the Wave to prevent it from jamming.  <img src="/assets/uploads/smileys/thinking.gif" alt=":think:" title="Thinking" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/901802</link><guid isPermaLink="true">https://multitool.ninja/post/901802</guid><dc:creator><![CDATA[sawman]]></dc:creator><pubDate>Sat, 14 Jun 2014 16:45:57 GMT</pubDate></item><item><title><![CDATA[Reply to Closing Leatherman Rebar with awl out causes pliers to jam. on Sat, 14 Jun 2014 16:39:50 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/jafrommn" aria-label="Profile: JAfromMn">@<bdi>JAfromMn</bdi></a> <a href="/post/899335">said</a>:</p>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/powernoodle" aria-label="Profile: powernoodle">@<bdi>powernoodle</bdi></a> <a href="/post/898610">said</a>:</p>
<blockquote>
<p dir="auto">Nice job, toolguy.  I was able to replicate the issue on my Rebar, but only by forcing it to do so.  It will not jam on its own.  My plier jaw lands on the long driver rather than between the two drivers where it can get stuck.</p>
</blockquote>
<p dir="auto">I just did the same.</p>
<p dir="auto">I also had to make mine jam.</p>
<p dir="auto">it closes fine on its own.</p>
<p dir="auto">if I force the pliers into the gap left in between tools were the awl lays it will jam</p>
</blockquote>
<p dir="auto">now that I forced it to happen its will jam up way easier.</p>
<p dir="auto">I have to fold the plier head into the other side then it never jams.</p>
]]></description><link>https://multitool.ninja/post/901800</link><guid isPermaLink="true">https://multitool.ninja/post/901800</guid><dc:creator><![CDATA[JAfromMn]]></dc:creator><pubDate>Sat, 14 Jun 2014 16:39:50 GMT</pubDate></item><item><title><![CDATA[Reply to Closing Leatherman Rebar with awl out causes pliers to jam. on Sat, 14 Jun 2014 16:20:12 GMT]]></title><description><![CDATA[<p dir="auto">I've got a black rebar.  Only a couple weeks old and not much use on it yet.  Mine has the same issue.  I'll have to get some more carry time on it to see if I becomes a major irritation.  Glad to hear that leatherman appears to be concerned over it.  Good thread!</p>
]]></description><link>https://multitool.ninja/post/901791</link><guid isPermaLink="true">https://multitool.ninja/post/901791</guid><dc:creator><![CDATA[clown]]></dc:creator><pubDate>Sat, 14 Jun 2014 16:20:12 GMT</pubDate></item><item><title><![CDATA[Reply to Closing Leatherman Rebar with awl out causes pliers to jam. on Sat, 07 Jun 2014 16:35:14 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/powernoodle" aria-label="Profile: powernoodle">@<bdi>powernoodle</bdi></a> <a href="/post/898610">said</a>:<br />
Nice job, toolguy.  I was able to replicate the issue on my Rebar, but only by forcing it to do so.  It will not jam on its own.  My plier jaw lands on the long driver rather than between the two drivers where it can get stuck.</p>
</blockquote>
<p dir="auto">I just did the same.</p>
<p dir="auto">I also had to make mine jam.</p>
<p dir="auto">it closes fine on its own.</p>
<p dir="auto">if I force the pliers into the gap left in between tools were the awl lays it will jam</p>
]]></description><link>https://multitool.ninja/post/899335</link><guid isPermaLink="true">https://multitool.ninja/post/899335</guid><dc:creator><![CDATA[JAfromMn]]></dc:creator><pubDate>Sat, 07 Jun 2014 16:35:14 GMT</pubDate></item><item><title><![CDATA[Reply to Closing Leatherman Rebar with awl out causes pliers to jam. on Sat, 07 Jun 2014 14:40:12 GMT]]></title><description><![CDATA[<p dir="auto">tried, nema problema.</p>
]]></description><link>https://multitool.ninja/post/899298</link><guid isPermaLink="true">https://multitool.ninja/post/899298</guid><dc:creator><![CDATA[nervium]]></dc:creator><pubDate>Sat, 07 Jun 2014 14:40:12 GMT</pubDate></item><item><title><![CDATA[Reply to Closing Leatherman Rebar with awl out causes pliers to jam. on Thu, 05 Jun 2014 17:54:18 GMT]]></title><description><![CDATA[<p dir="auto">Thank you gentlemen.</p>
<p dir="auto">It's good to be able to contribute to all my brothers from another mother.LOL</p>
<p dir="auto">And let me not forget my sisters as well.</p>
<p dir="auto">Now that people are aware of this minor idiosyncrasy,they will be able to avoid it while closing the Rebar,when the awl is deployed.</p>
]]></description><link>https://multitool.ninja/post/898619</link><guid isPermaLink="true">https://multitool.ninja/post/898619</guid><dc:creator><![CDATA[toolguy]]></dc:creator><pubDate>Thu, 05 Jun 2014 17:54:18 GMT</pubDate></item><item><title><![CDATA[Reply to Closing Leatherman Rebar with awl out causes pliers to jam. on Thu, 05 Jun 2014 17:23:29 GMT]]></title><description><![CDATA[<p dir="auto">Nice job, toolguy.  I was able to replicate the issue on my Rebar, but only by forcing it to do so.  It will not jam on its own.  My plier jaw lands on the long driver rather than between the two drivers where it can get stuck.</p>
]]></description><link>https://multitool.ninja/post/898610</link><guid isPermaLink="true">https://multitool.ninja/post/898610</guid><dc:creator><![CDATA[powernoodle]]></dc:creator><pubDate>Thu, 05 Jun 2014 17:23:29 GMT</pubDate></item><item><title><![CDATA[Reply to Closing Leatherman Rebar with awl out causes pliers to jam. on Thu, 05 Jun 2014 17:22:58 GMT]]></title><description><![CDATA[<p dir="auto">I just tried this with my 4 plain stainless Rebars. Two of them exhibit this behavour, 2 do not.</p>
<p dir="auto">The 2 that do have slightly tighter plier pivots, so when closing, the plier head stays open a little longer, pushing into the space where the awl would be.</p>
<p dir="auto">Not a big problem. Closing with the plier head going into the opposite handle first seems to solve this.</p>
]]></description><link>https://multitool.ninja/post/898609</link><guid isPermaLink="true">https://multitool.ninja/post/898609</guid><dc:creator><![CDATA[Millhouse]]></dc:creator><pubDate>Thu, 05 Jun 2014 17:22:58 GMT</pubDate></item><item><title><![CDATA[Reply to Closing Leatherman Rebar with awl out causes pliers to jam. on Thu, 05 Jun 2014 17:16:25 GMT]]></title><description><![CDATA[<p dir="auto">Nailed it.</p>
<p dir="auto">Spot on toolguy. Just got off the phone with Shelly again (really nice people). Something tells me a slight design modification might be in the future for the Rebar.</p>
]]></description><link>https://multitool.ninja/post/898608</link><guid isPermaLink="true">https://multitool.ninja/post/898608</guid><dc:creator><![CDATA[Rux]]></dc:creator><pubDate>Thu, 05 Jun 2014 17:16:25 GMT</pubDate></item><item><title><![CDATA[Reply to Closing Leatherman Rebar with awl out causes pliers to jam. on Thu, 05 Jun 2014 17:06:58 GMT]]></title><description><![CDATA[<p dir="auto">These pics show the post placed inside the handles of the Wave,to preclude the issue of the pliers jamming between two other tools.</p>
<p dir="auto">The post is placed just above the rivet.</p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/124095_DSCN1093-3-1.jpg" alt="DSCN1093-3-1.jpg" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/124097_DSCN1094-3-1.jpg" alt="DSCN1094-3-1.jpg" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/898607</link><guid isPermaLink="true">https://multitool.ninja/post/898607</guid><dc:creator><![CDATA[toolguy]]></dc:creator><pubDate>Thu, 05 Jun 2014 17:06:58 GMT</pubDate></item><item><title><![CDATA[Reply to Closing Leatherman Rebar with awl out causes pliers to jam. on Thu, 05 Jun 2014 16:59:56 GMT]]></title><description><![CDATA[<p dir="auto">This sequence shows the tool closing on the awl side in the first pic.</p>
<p dir="auto">'The second pic show the pliers jammed between the two divers with the awl extended.</p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/124091_DSCN1090-2-1.jpg" alt="DSCN1090-2-1.jpg" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/124093_DSCN1091-2-1.jpg" alt="DSCN1091-2-1.jpg" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/898606</link><guid isPermaLink="true">https://multitool.ninja/post/898606</guid><dc:creator><![CDATA[toolguy]]></dc:creator><pubDate>Thu, 05 Jun 2014 16:59:56 GMT</pubDate></item><item><title><![CDATA[Reply to Closing Leatherman Rebar with awl out causes pliers to jam. on Thu, 05 Jun 2014 16:52:15 GMT]]></title><description><![CDATA[<p dir="auto">It has nothing to do with the coating.This issue appears in those Rebars that close the pliers,on the awl side,first.If your Rebar closes the opposite side [phillips driver] first you will not experience this issue.Try it.</p>
<p dir="auto">Below is a sequence of pics that will illustrate this issue,hopefully.</p>
<p dir="auto">If you look inside the handles of the Wave you will witness a post attached to the bottom of the handle which extends into the tool bay.This post is designed to prevent this very issue of the "jamming pliers".As the plier head closes into the handle it ride on top of this post and then rides above the folded tools before it finally seats into its closed position.</p>
<p dir="auto">The first sequence shows the pliers closing into the handle on the phillips side first.Then closing into the awl side and finally almost closed and no tool jamming.</p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/124083_DSCN1086-1-1.jpg" alt="DSCN1086-1-1.jpg" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/124085_DSCN1087-1-1.jpg" alt="DSCN1087-1-1.jpg" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/124087_DSCN1088-1-1.jpg" alt="DSCN1088-1-1.jpg" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/898603</link><guid isPermaLink="true">https://multitool.ninja/post/898603</guid><dc:creator><![CDATA[toolguy]]></dc:creator><pubDate>Thu, 05 Jun 2014 16:52:15 GMT</pubDate></item><item><title><![CDATA[Reply to Closing Leatherman Rebar with awl out causes pliers to jam. on Thu, 05 Jun 2014 14:42:00 GMT]]></title><description><![CDATA[<p dir="auto">So I forwarded this thread onto Leatherman Tool Group and called them this morning. They were extremely helpful.</p>
<p dir="auto">They did not have a black Rebar to test in their inventory, but an employee did happen to have a black oxide Rebar in their pocket and couldn't reproduce the issue.</p>
<p dir="auto">They were genuinely concerned and interested in making it right. They want my specific Rebar back to test out, check for QC, tolerances, etc.</p>
<p dir="auto">They are ordering a black oxide Rebar, checking to make sure it does not have the jamming issue and sending me a paid return shipping label to do a swapout.</p>
<p dir="auto">If that's not customer service, I seriously don't know what is. Not that I ever planned to stray from Leatherman, but they just sealed the deal in having a customer for life out of me.</p>
<p dir="auto">Those with the BO version and having the same issues, I suggest you call them and let them know so they can check out your Rebar as well. They truly cared about making it right.</p>
<p dir="auto">I &lt;3 Leatherman Tool Group.</p>
]]></description><link>https://multitool.ninja/post/898536</link><guid isPermaLink="true">https://multitool.ninja/post/898536</guid><dc:creator><![CDATA[Rux]]></dc:creator><pubDate>Thu, 05 Jun 2014 14:42:00 GMT</pubDate></item><item><title><![CDATA[Reply to Closing Leatherman Rebar with awl out causes pliers to jam. on Thu, 05 Jun 2014 12:26:54 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/sawman" aria-label="Profile: sawman">@<bdi>sawman</bdi></a> <a href="/post/898447">said</a>:<br />
I just tried it with one of my stainless Rebars and could not produce the problem.</p>
</blockquote>
<p dir="auto">Same here.</p>
]]></description><link>https://multitool.ninja/post/898489</link><guid isPermaLink="true">https://multitool.ninja/post/898489</guid><dc:creator><![CDATA[AaronX]]></dc:creator><pubDate>Thu, 05 Jun 2014 12:26:54 GMT</pubDate></item><item><title><![CDATA[Reply to Closing Leatherman Rebar with awl out causes pliers to jam. on Thu, 05 Jun 2014 12:05:45 GMT]]></title><description><![CDATA[<p dir="auto">When I pull out and extend the awl, the Rebar is still stiff (been opening/closing it to break it in to loosen/smooth up the action) and sandwiching is what naturally happens when I close it up, due to stiffness and then the jam occurs. Again, it's only with the awl extended.</p>
<p dir="auto">I really don't see this being worth a return to Leatherman. I'd probably get it back with an "in-spec" note. Wonder why it appears to only be the Black Oxide though. Weird.</p>
<p dir="auto">Still love my Rebar. I don't see myself sending it in over this as I've already grown attached to it being in my pocket and wouldn't want to be without it for that long.</p>
<p dir="auto">I didn't feel the same attachment to my Wave when I sent it in.</p>
]]></description><link>https://multitool.ninja/post/898475</link><guid isPermaLink="true">https://multitool.ninja/post/898475</guid><dc:creator><![CDATA[Rux]]></dc:creator><pubDate>Thu, 05 Jun 2014 12:05:45 GMT</pubDate></item><item><title><![CDATA[Reply to Closing Leatherman Rebar with awl out causes pliers to jam. on Thu, 05 Jun 2014 10:55:41 GMT]]></title><description><![CDATA[<p dir="auto">I just tried it with one of my stainless Rebars and could not produce the problem.</p>
]]></description><link>https://multitool.ninja/post/898447</link><guid isPermaLink="true">https://multitool.ninja/post/898447</guid><dc:creator><![CDATA[sawman]]></dc:creator><pubDate>Thu, 05 Jun 2014 10:55:41 GMT</pubDate></item><item><title><![CDATA[Reply to Closing Leatherman Rebar with awl out causes pliers to jam. on Thu, 05 Jun 2014 09:55:27 GMT]]></title><description><![CDATA[<p dir="auto">I've never closed my LM's (any of them) that way as you mentioned where it jams. Just tried  to do it that way (felt un-natural to me) and it did jam when I did it slowly.</p>
<p dir="auto">Good thing I don't close my LM like that as I'm sure there are many others that probably don't, hence why this "jamming" is not commonly known.</p>
]]></description><link>https://multitool.ninja/post/898431</link><guid isPermaLink="true">https://multitool.ninja/post/898431</guid><dc:creator><![CDATA[Mango808]]></dc:creator><pubDate>Thu, 05 Jun 2014 09:55:27 GMT</pubDate></item><item><title><![CDATA[Reply to Closing Leatherman Rebar with awl out causes pliers to jam. on Thu, 05 Jun 2014 06:56:04 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/rux" aria-label="Profile: WildJ3">@<bdi>WildJ3</bdi></a> <a href="/post/898219">said</a>:<br />
Indeed, wedging between the two flat drivers with the awl deployed is exactly what's happening. When closing it up with everything tucked away, the awl fills the gap the plier slips into. Wonder if JA has experienced this on his. He uses it enough.</p>
</blockquote>
<p dir="auto">This. The awl normally acts like a kind of "ramp" guiding the plier head over the screwdrivers. With the awl deployed, it get stuck in between the drivers.</p>
]]></description><link>https://multitool.ninja/post/898412</link><guid isPermaLink="true">https://multitool.ninja/post/898412</guid><dc:creator><![CDATA[bmot]]></dc:creator><pubDate>Thu, 05 Jun 2014 06:56:04 GMT</pubDate></item><item><title><![CDATA[Reply to Closing Leatherman Rebar with awl out causes pliers to jam. on Wed, 04 Jun 2014 17:39:53 GMT]]></title><description><![CDATA[<p dir="auto">I know for sure that this is a problem on the Juice S2 also.  Its notorious for getting stuck.</p>
]]></description><link>https://multitool.ninja/post/898222</link><guid isPermaLink="true">https://multitool.ninja/post/898222</guid><dc:creator><![CDATA[powernoodle]]></dc:creator><pubDate>Wed, 04 Jun 2014 17:39:53 GMT</pubDate></item></channel></rss>