<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0"><channel><title><![CDATA[CyberTool Lite Field Test and Review (Picture Storm!)]]></title><description><![CDATA[<p dir="auto"><strong>CyberTool Lite Review and Field Test</strong></p>
<p dir="auto"><strong>Some love the CyberTools, Some do not see the point, and others think they are neat, but not practical.</strong></p>
<pre><code>                  So, I decided to run a test.  Yes, I love the CyberTool, so I am a bit biased, but the test might help others make up their own minds.
</code></pre>
<p dir="auto">Can a CyberTool function as intended when put to a test in the very arena that it was designed to handle?  I  dug through the basement black-hole area and pulled out an old computer to be the test bed.  The test? fully disassemble the computer to its base pieces, using only the CyberTool Lite.  The computer in question is one I build over 10 years ago, and has a dead power-supply.  but it is the perfect computer to use as a test since it uses many of the same connectors and screws that a computer in 2001 used, when the CyberTool was first released.</p>
<p dir="auto">I work in the IT field, I manage Network Security, and perform Forensics (cell Phone, Computer, Network) for the Navy.  I also work on Police and Fire Radios, Hand-held scanners, and some other types of equipment that I will not get into.  however, with the shortage of people, I also run cable, install network equipment, lock down desktops and laptops (software, not a physical lock), as well as anything else that pops up.  I say this to give you an idea of the environment I work in and how  frequently I have my hands involved in IT.  Other than my <a href="/topic/53540">.... And Let Fate Decide</a> challenge that I am currently going through, I carry a CyberTool every day.  though I do not need the bit driver all that frequently, when I do, it is a real time saver.  If I know I am going to build a PC, or swap hardware in a router, or anything of that nature, I have my dedicate tools ready to go.  However, when you find yourself suddenly involved in a problem, the CyberTool has the ability to get through most situations with ease.</p>
<p dir="auto"><strong>So, let us take a look at the CyberTool Lite.</strong></p>
<p dir="auto">The CyberTool series are all 91mm Swiss Army Knives</p>
<p dir="auto">&lt;a href="<a href="http://s833.photobucket.com/user/detronphillips/media/SAKs/Cybertool%20Lite/DSC00277.jpg.html" rel="nofollow ugc">http://s833.photobucket.com/user/detronphillips/media/SAKs/Cybertool Lite/DSC00277.jpg.html</a>" target="_blank" rel="noopener noreferrer"&gt;&lt;img src="<a href="http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cybertool%20Lite/DSC00277.jpg" rel="nofollow ugc">http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cybertool Lite/DSC00277.jpg</a>" alt="banner" style="max-width: 100%; height: auto;" /&gt;&lt;/a&gt;</p>
<p dir="auto">&lt;a href="<a href="http://s833.photobucket.com/user/detronphillips/media/SAKs/Cybertool%20Lite/DSC00278.jpg.html" rel="nofollow ugc">http://s833.photobucket.com/user/detronphillips/media/SAKs/Cybertool Lite/DSC00278.jpg.html</a>" target="_blank" rel="noopener noreferrer"&gt;&lt;img src="<a href="http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cybertool%20Lite/DSC00278.jpg" rel="nofollow ugc">http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cybertool Lite/DSC00278.jpg</a>" alt="banner" style="max-width: 100%; height: auto;" /&gt;&lt;/a&gt;</p>
<p dir="auto">&lt;a href="<a href="http://s833.photobucket.com/user/detronphillips/media/SAKs/Cybertool%20Lite/DSC00279.jpg.html" rel="nofollow ugc">http://s833.photobucket.com/user/detronphillips/media/SAKs/Cybertool Lite/DSC00279.jpg.html</a>" target="_blank" rel="noopener noreferrer"&gt;&lt;img src="<a href="http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cybertool%20Lite/DSC00279.jpg" rel="nofollow ugc">http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cybertool Lite/DSC00279.jpg</a>" alt="banner" style="max-width: 100%; height: auto;" /&gt;&lt;/a&gt;</p>
<p dir="auto">&lt;a href="<a href="http://s833.photobucket.com/user/detronphillips/media/SAKs/Cybertool%20Lite/DSC00280.jpg.html" rel="nofollow ugc">http://s833.photobucket.com/user/detronphillips/media/SAKs/Cybertool Lite/DSC00280.jpg.html</a>" target="_blank" rel="noopener noreferrer"&gt;&lt;img src="<a href="http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cybertool%20Lite/DSC00280.jpg" rel="nofollow ugc">http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cybertool Lite/DSC00280.jpg</a>" alt="banner" style="max-width: 100%; height: auto;" /&gt;&lt;/a&gt;</p>
<p dir="auto">&lt;a href="<a href="http://s833.photobucket.com/user/detronphillips/media/SAKs/Cybertool%20Lite/DSC00283.jpg.html" rel="nofollow ugc">http://s833.photobucket.com/user/detronphillips/media/SAKs/Cybertool Lite/DSC00283.jpg.html</a>" target="_blank" rel="noopener noreferrer"&gt;&lt;img src="<a href="http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cybertool%20Lite/DSC00283.jpg" rel="nofollow ugc">http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cybertool Lite/DSC00283.jpg</a>" alt="banner" style="max-width: 100%; height: auto;" /&gt;&lt;/a&gt;</p>
<p dir="auto">&lt;a href="<a href="http://s833.photobucket.com/user/detronphillips/media/SAKs/Cybertool%20Lite/DSC00284.jpg.html" rel="nofollow ugc">http://s833.photobucket.com/user/detronphillips/media/SAKs/Cybertool Lite/DSC00284.jpg.html</a>" target="_blank" rel="noopener noreferrer"&gt;&lt;img src="<a href="http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cybertool%20Lite/DSC00284.jpg" rel="nofollow ugc">http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cybertool Lite/DSC00284.jpg</a>" alt="banner" style="max-width: 100%; height: auto;" /&gt;&lt;/a&gt;</p>
<p dir="auto">&lt;a href="<a href="http://s833.photobucket.com/user/detronphillips/media/SAKs/Cybertool%20Lite/DSC00285.jpg.html" rel="nofollow ugc">http://s833.photobucket.com/user/detronphillips/media/SAKs/Cybertool Lite/DSC00285.jpg.html</a>" target="_blank" rel="noopener noreferrer"&gt;&lt;img src="<a href="http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cybertool%20Lite/DSC00285.jpg" rel="nofollow ugc">http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cybertool Lite/DSC00285.jpg</a>" alt="banner" style="max-width: 100%; height: auto;" /&gt;&lt;/a&gt;</p>
<p dir="auto">&lt;a href="<a href="http://s833.photobucket.com/user/detronphillips/media/SAKs/Cybertool%20Lite/DSC00286.jpg.html" rel="nofollow ugc">http://s833.photobucket.com/user/detronphillips/media/SAKs/Cybertool Lite/DSC00286.jpg.html</a>" target="_blank" rel="noopener noreferrer"&gt;&lt;img src="<a href="http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cybertool%20Lite/DSC00286.jpg" rel="nofollow ugc">http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cybertool Lite/DSC00286.jpg</a>" alt="banner" style="max-width: 100%; height: auto;" /&gt;&lt;/a&gt;</p>
<p dir="auto">&lt;a href="<a href="http://s833.photobucket.com/user/detronphillips/media/SAKs/Cybertool%20Lite/DSC00288.jpg.html" rel="nofollow ugc">http://s833.photobucket.com/user/detronphillips/media/SAKs/Cybertool Lite/DSC00288.jpg.html</a>" target="_blank" rel="noopener noreferrer"&gt;&lt;img src="<a href="http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cybertool%20Lite/DSC00288.jpg" rel="nofollow ugc">http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cybertool Lite/DSC00288.jpg</a>" alt="banner" style="max-width: 100%; height: auto;" /&gt;&lt;/a&gt;</p>
<p dir="auto"><strong>This SAK has the following tools:</strong></p>
<p dir="auto"><strong>Front</strong><br />
Large Blade, with thinner tang<br />
Small Blade<br />
Scissors<br />
Pliers<br />
**CyberTool Layer **<br />
Torx #8, #10, #15<br />
Hex 4mm<br />
Flat 4mm<br />
Phillips #2<br />
Pozidrive #0, #1<br />
Hex 5 mm female for D-SUB connectors<br />
Hex 4 mm female Hex drive for the bits<br />
newer plastic 5x Magnifier Glass<br />
LED Light<br />
Can Opener<br />
Cap lifter</p>
<p dir="auto"><strong>Back</strong><br />
Awl with sewing eye<br />
Hook<br />
Corkscrew<br />
Mini screwdriver stored in corkscrew<br />
Keyring</p>
<p dir="auto"><strong>Scale</strong><br />
Tooth pick<br />
Tweezers<br />
Ball Point Pen  (When Factory, I removed the Plus scales for the Stayglow ones, I do not have this on mine)<br />
Straight Pin      (When Factory, I removed the Plus scales for the Stayglow ones, I do not have this on mine)</p>
<p dir="auto">Scales are StayGlow</p>
<p dir="auto">Here is a picture showing that the bit driver does indeed have two sizes</p>
<p dir="auto">&lt;a href="<a href="http://s833.photobucket.com/user/detronphillips/media/SAKs/Cybertool%20Lite/Review%20shots/DSC00855.jpg.html" rel="nofollow ugc">http://s833.photobucket.com/user/detronphillips/media/SAKs/Cybertool Lite/Review shots/DSC00855.jpg.html</a>" target="_blank" rel="noopener noreferrer"&gt;&lt;img src="<a href="http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cybertool%20Lite/Review%20shots/DSC00855.jpg" rel="nofollow ugc">http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cybertool Lite/Review shots/DSC00855.jpg</a>" alt="banner" style="max-width: 100%; height: auto;" /&gt;&lt;/a&gt;</p>
<p dir="auto">and for a little size perspective I have taken some shots of it with the Charge TTi</p>
<p dir="auto">&lt;a href="<a href="http://s833.photobucket.com/user/detronphillips/media/SAKs/Cybertool%20Lite/Review%20shots/DSC00936.jpg.html" rel="nofollow ugc">http://s833.photobucket.com/user/detronphillips/media/SAKs/Cybertool Lite/Review shots/DSC00936.jpg.html</a>" target="_blank" rel="noopener noreferrer"&gt;&lt;img src="<a href="http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cybertool%20Lite/Review%20shots/DSC00936.jpg" rel="nofollow ugc">http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cybertool Lite/Review shots/DSC00936.jpg</a>" alt="banner" style="max-width: 100%; height: auto;" /&gt;&lt;/a&gt;<br />
&lt;a href="<a href="http://s833.photobucket.com/user/detronphillips/media/SAKs/Cybertool%20Lite/Review%20shots/DSC00937.jpg.html" rel="nofollow ugc">http://s833.photobucket.com/user/detronphillips/media/SAKs/Cybertool Lite/Review shots/DSC00937.jpg.html</a>" target="_blank" rel="noopener noreferrer"&gt;&lt;img src="<a href="http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cybertool%20Lite/Review%20shots/DSC00937.jpg" rel="nofollow ugc">http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cybertool Lite/Review shots/DSC00937.jpg</a>" alt="banner" style="max-width: 100%; height: auto;" /&gt;&lt;/a&gt;<br />
&lt;a href="<a href="http://s833.photobucket.com/user/detronphillips/media/SAKs/Cybertool%20Lite/Review%20shots/DSC00938.jpg.html" rel="nofollow ugc">http://s833.photobucket.com/user/detronphillips/media/SAKs/Cybertool Lite/Review shots/DSC00938.jpg.html</a>" target="_blank" rel="noopener noreferrer"&gt;&lt;img src="<a href="http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cybertool%20Lite/Review%20shots/DSC00938.jpg" rel="nofollow ugc">http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cybertool Lite/Review shots/DSC00938.jpg</a>" alt="banner" style="max-width: 100%; height: auto;" /&gt;&lt;/a&gt;<br />
&lt;a href="<a href="http://s833.photobucket.com/user/detronphillips/media/SAKs/Cybertool%20Lite/Review%20shots/DSC00939.jpg.html" rel="nofollow ugc">http://s833.photobucket.com/user/detronphillips/media/SAKs/Cybertool Lite/Review shots/DSC00939.jpg.html</a>" target="_blank" rel="noopener noreferrer"&gt;&lt;img src="<a href="http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cybertool%20Lite/Review%20shots/DSC00939.jpg" rel="nofollow ugc">http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cybertool Lite/Review shots/DSC00939.jpg</a>" alt="banner" style="max-width: 100%; height: auto;" /&gt;&lt;/a&gt;</p>
<p dir="auto"><strong>NOW, ON TO THE CHALLENGE!!!</strong></p>
<p dir="auto">So I have a mid-tower PC that I will disassemble, this PC case is taken apart by removing the top, which then allows the sides to be lifted up with no tools.<br />
the top is held on with a single thumb-screw.  But of course, it was too tight.  However the CyberTool Bottle Opener's flat driver was perfect for this task.</p>
<p dir="auto">&lt;a href="<a href="http://s833.photobucket.com/user/detronphillips/media/SAKs/Cybertool%20Lite/Review%20shots/DSC00835.jpg.html" rel="nofollow ugc">http://s833.photobucket.com/user/detronphillips/media/SAKs/Cybertool Lite/Review shots/DSC00835.jpg.html</a>" target="_blank" rel="noopener noreferrer"&gt;&lt;img src="<a href="http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cybertool%20Lite/Review%20shots/DSC00835.jpg" rel="nofollow ugc">http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cybertool Lite/Review shots/DSC00835.jpg</a>" alt="banner" style="max-width: 100%; height: auto;" /&gt;&lt;/a&gt;</p>
<p dir="auto">now I can continue with the top's removal and get the sides out of the way.</p>
<p dir="auto">Next I needed to remove the external antenna that goes to the WiFi card, should be hand tight, but time has taken it's toll on this connector, and I might also guess that being bumped due to the way it protrudes may have also created tension in the connector.<br />
CyberTool Pliers to the rescue!</p>
<p dir="auto">&lt;a href="<a href="http://s833.photobucket.com/user/detronphillips/media/SAKs/Cybertool%20Lite/Review%20shots/DSC00836.jpg.html" rel="nofollow ugc">http://s833.photobucket.com/user/detronphillips/media/SAKs/Cybertool Lite/Review shots/DSC00836.jpg.html</a>" target="_blank" rel="noopener noreferrer"&gt;&lt;img src="<a href="http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cybertool%20Lite/Review%20shots/DSC00836.jpg" rel="nofollow ugc">http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cybertool Lite/Review shots/DSC00836.jpg</a>" alt="banner" style="max-width: 100%; height: auto;" /&gt;&lt;/a&gt;</p>
<p dir="auto">before I start stripping out piece, I thought I would do a quick demonstration of the flash light that comes on the CyberTool Lite.<br />
does not compete with today's flash light technology, but I can see what I need to, and I can even read the small text on the motherboard</p>
<p dir="auto">&lt;a href="<a href="http://s833.photobucket.com/user/detronphillips/media/SAKs/Cybertool%20Lite/Review%20shots/DSC00838.jpg.html" rel="nofollow ugc">http://s833.photobucket.com/user/detronphillips/media/SAKs/Cybertool Lite/Review shots/DSC00838.jpg.html</a>" target="_blank" rel="noopener noreferrer"&gt;&lt;img src="<a href="http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cybertool%20Lite/Review%20shots/DSC00838.jpg" rel="nofollow ugc">http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cybertool Lite/Review shots/DSC00838.jpg</a>" alt="banner" style="max-width: 100%; height: auto;" /&gt;&lt;/a&gt;</p>
<p dir="auto">The first thing I do when taking a PC apart completely, is to remove as many cables as I can.  So I removed all of the Molex connectors (the older white power connectors that PCs used in the past), and then all of the IDE cables (usually an 80 pin cable).  Now I can remove the power supply, which will remove all the disconnected power cables to clear up some room to work.  the power supply is held in place by 4 phillips screws.  Bit Driver tackled this like a pro!</p>
<p dir="auto">&lt;a href="<a href="http://s833.photobucket.com/user/detronphillips/media/SAKs/Cybertool%20Lite/Review%20shots/DSC00839.jpg.html" rel="nofollow ugc">http://s833.photobucket.com/user/detronphillips/media/SAKs/Cybertool Lite/Review shots/DSC00839.jpg.html</a>" target="_blank" rel="noopener noreferrer"&gt;&lt;img src="<a href="http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cybertool%20Lite/Review%20shots/DSC00839.jpg" rel="nofollow ugc">http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cybertool Lite/Review shots/DSC00839.jpg</a>" alt="banner" style="max-width: 100%; height: auto;" /&gt;&lt;/a&gt;<br />
&lt;a href="<a href="http://s833.photobucket.com/user/detronphillips/media/SAKs/Cybertool%20Lite/Review%20shots/DSC00840.jpg.html" rel="nofollow ugc">http://s833.photobucket.com/user/detronphillips/media/SAKs/Cybertool Lite/Review shots/DSC00840.jpg.html</a>" target="_blank" rel="noopener noreferrer"&gt;&lt;img src="<a href="http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cybertool%20Lite/Review%20shots/DSC00840.jpg" rel="nofollow ugc">http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cybertool Lite/Review shots/DSC00840.jpg</a>" alt="banner" style="max-width: 100%; height: auto;" /&gt;&lt;/a&gt;<br />
&lt;a href="<a href="http://s833.photobucket.com/user/detronphillips/media/SAKs/Cybertool%20Lite/Review%20shots/DSC00841.jpg.html" rel="nofollow ugc">http://s833.photobucket.com/user/detronphillips/media/SAKs/Cybertool Lite/Review shots/DSC00841.jpg.html</a>" target="_blank" rel="noopener noreferrer"&gt;&lt;img src="<a href="http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cybertool%20Lite/Review%20shots/DSC00841.jpg" rel="nofollow ugc">http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cybertool Lite/Review shots/DSC00841.jpg</a>" alt="banner" style="max-width: 100%; height: auto;" /&gt;&lt;/a&gt;</p>
<p dir="auto">Now that I removed the spaghetti nightmare, I can tell what I actually have to do.  Next I am removing all of the 3.5" and 5.25" devices.<br />
This computer has Two 3.5" hard drives, a 3.5" floppy drive, and in the 5.25" bays there is a zip drive (in a 3.5" to 5.25" adapter), a DVD-ROM, and a port extender that moved things like headphone jacks and game ports to the front.<br />
All of these are held in by phillips screws.  Again the bit driver seems to be more than capable for the task at hand.</p>
<p dir="auto">&lt;a href="<a href="http://s833.photobucket.com/user/detronphillips/media/SAKs/Cybertool%20Lite/Review%20shots/DSC00842.jpg.html" rel="nofollow ugc">http://s833.photobucket.com/user/detronphillips/media/SAKs/Cybertool Lite/Review shots/DSC00842.jpg.html</a>" target="_blank" rel="noopener noreferrer"&gt;&lt;img src="<a href="http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cybertool%20Lite/Review%20shots/DSC00842.jpg" rel="nofollow ugc">http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cybertool Lite/Review shots/DSC00842.jpg</a>" alt="banner" style="max-width: 100%; height: auto;" /&gt;&lt;/a&gt;<br />
&lt;a href="<a href="http://s833.photobucket.com/user/detronphillips/media/SAKs/Cybertool%20Lite/Review%20shots/DSC00843.jpg.html" rel="nofollow ugc">http://s833.photobucket.com/user/detronphillips/media/SAKs/Cybertool Lite/Review shots/DSC00843.jpg.html</a>" target="_blank" rel="noopener noreferrer"&gt;&lt;img src="<a href="http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cybertool%20Lite/Review%20shots/DSC00843.jpg" rel="nofollow ugc">http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cybertool Lite/Review shots/DSC00843.jpg</a>" alt="banner" style="max-width: 100%; height: auto;" /&gt;&lt;/a&gt;<br />
&lt;a href="<a href="http://s833.photobucket.com/user/detronphillips/media/SAKs/Cybertool%20Lite/Review%20shots/DSC00844.jpg.html" rel="nofollow ugc">http://s833.photobucket.com/user/detronphillips/media/SAKs/Cybertool Lite/Review shots/DSC00844.jpg.html</a>" target="_blank" rel="noopener noreferrer"&gt;&lt;img src="<a href="http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cybertool%20Lite/Review%20shots/DSC00844.jpg" rel="nofollow ugc">http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cybertool Lite/Review shots/DSC00844.jpg</a>" alt="banner" style="max-width: 100%; height: auto;" /&gt;&lt;/a&gt;</p>
<p dir="auto">So, this screw was very tight, and I did not want to ruin a bit, so I switched to the pliers to get it started.</p>
<p dir="auto">&lt;a href="<a href="http://s833.photobucket.com/user/detronphillips/media/SAKs/Cybertool%20Lite/Review%20shots/DSC00845.jpg.html" rel="nofollow ugc">http://s833.photobucket.com/user/detronphillips/media/SAKs/Cybertool Lite/Review shots/DSC00845.jpg.html</a>" target="_blank" rel="noopener noreferrer"&gt;&lt;img src="<a href="http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cybertool%20Lite/Review%20shots/DSC00845.jpg" rel="nofollow ugc">http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cybertool Lite/Review shots/DSC00845.jpg</a>" alt="banner" style="max-width: 100%; height: auto;" /&gt;&lt;/a&gt;</p>
<p dir="auto">&lt;a href="<a href="http://s833.photobucket.com/user/detronphillips/media/SAKs/Cybertool%20Lite/Review%20shots/DSC00846.jpg.html" rel="nofollow ugc">http://s833.photobucket.com/user/detronphillips/media/SAKs/Cybertool Lite/Review shots/DSC00846.jpg.html</a>" target="_blank" rel="noopener noreferrer"&gt;&lt;img src="<a href="http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cybertool%20Lite/Review%20shots/DSC00846.jpg" rel="nofollow ugc">http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cybertool Lite/Review shots/DSC00846.jpg</a>" alt="banner" style="max-width: 100%; height: auto;" /&gt;&lt;/a&gt;</p>
<p dir="auto">Folding the pliers to 90 degrees of full open allowed me to get the pliers in at a better angle, and still use the pliers effectively.</p>
<p dir="auto">&lt;a href="<a href="http://s833.photobucket.com/user/detronphillips/media/SAKs/Cybertool%20Lite/Review%20shots/DSC00847.jpg.html" rel="nofollow ugc">http://s833.photobucket.com/user/detronphillips/media/SAKs/Cybertool Lite/Review shots/DSC00847.jpg.html</a>" target="_blank" rel="noopener noreferrer"&gt;&lt;img src="<a href="http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cybertool%20Lite/Review%20shots/DSC00847.jpg" rel="nofollow ugc">http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cybertool Lite/Review shots/DSC00847.jpg</a>" alt="banner" style="max-width: 100%; height: auto;" /&gt;&lt;/a&gt;</p>
<p dir="auto">One side is now done, and I will attack the other side,  I realized how lazy I was when I built this computer and did not use all the screws expected on the back side.  <img src="/assets/uploads/smileys/rofl.gif" alt=":rofl:" title="rofl" class="forum-smiley emoji" /></p>
<p dir="auto">&lt;a href="<a href="http://s833.photobucket.com/user/detronphillips/media/SAKs/Cybertool%20Lite/Review%20shots/DSC00850.jpg.html" rel="nofollow ugc">http://s833.photobucket.com/user/detronphillips/media/SAKs/Cybertool Lite/Review shots/DSC00850.jpg.html</a>" target="_blank" rel="noopener noreferrer"&gt;&lt;img src="<a href="http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cybertool%20Lite/Review%20shots/DSC00850.jpg" rel="nofollow ugc">http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cybertool Lite/Review shots/DSC00850.jpg</a>" alt="banner" style="max-width: 100%; height: auto;" /&gt;&lt;/a&gt;</p>
<p dir="auto">The bit driver is still taking care of business.</p>
<p dir="auto">&lt;a href="<a href="http://s833.photobucket.com/user/detronphillips/media/SAKs/Cybertool%20Lite/Review%20shots/DSC00851.jpg.html" rel="nofollow ugc">http://s833.photobucket.com/user/detronphillips/media/SAKs/Cybertool Lite/Review shots/DSC00851.jpg.html</a>" target="_blank" rel="noopener noreferrer"&gt;&lt;img src="<a href="http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cybertool%20Lite/Review%20shots/DSC00851.jpg" rel="nofollow ugc">http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cybertool Lite/Review shots/DSC00851.jpg</a>" alt="banner" style="max-width: 100%; height: auto;" /&gt;&lt;/a&gt;</p>
<p dir="auto">Now all of  the drives are out, I moved on to the cards.<br />
Cards are fastened to the case with a phillips screw, and again...  yep, you guessed it, the bit driver reigned supreme!</p>
<p dir="auto">&lt;a href="<a href="http://s833.photobucket.com/user/detronphillips/media/SAKs/Cybertool%20Lite/Review%20shots/DSC00857.jpg.html" rel="nofollow ugc">http://s833.photobucket.com/user/detronphillips/media/SAKs/Cybertool Lite/Review shots/DSC00857.jpg.html</a>" target="_blank" rel="noopener noreferrer"&gt;&lt;img src="<a href="http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cybertool%20Lite/Review%20shots/DSC00857.jpg" rel="nofollow ugc">http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cybertool Lite/Review shots/DSC00857.jpg</a>" alt="banner" style="max-width: 100%; height: auto;" /&gt;&lt;/a&gt;</p>
<p dir="auto">So this AGP card has a small release pull,  unlike newer designs for graphics card release mechanisms, this one is blocked by the heat sync.  luckily I had a CyberTool!  the pliers were able to not only reach it, but grap and pull without contacting anything else at the same time.</p>
<p dir="auto">&lt;a href="<a href="http://s833.photobucket.com/user/detronphillips/media/SAKs/Cybertool%20Lite/Review%20shots/DSC00858.jpg.html" rel="nofollow ugc">http://s833.photobucket.com/user/detronphillips/media/SAKs/Cybertool Lite/Review shots/DSC00858.jpg.html</a>" target="_blank" rel="noopener noreferrer"&gt;&lt;img src="<a href="http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cybertool%20Lite/Review%20shots/DSC00858.jpg" rel="nofollow ugc">http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cybertool Lite/Review shots/DSC00858.jpg</a>" alt="banner" style="max-width: 100%; height: auto;" /&gt;&lt;/a&gt;</p>
<p dir="auto">and here you can see the design without the card in the way</p>
<p dir="auto">&lt;a href="<a href="http://s833.photobucket.com/user/detronphillips/media/SAKs/Cybertool%20Lite/Review%20shots/DSC00859.jpg.html" rel="nofollow ugc">http://s833.photobucket.com/user/detronphillips/media/SAKs/Cybertool Lite/Review shots/DSC00859.jpg.html</a>" target="_blank" rel="noopener noreferrer"&gt;&lt;img src="<a href="http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cybertool%20Lite/Review%20shots/DSC00859.jpg" rel="nofollow ugc">http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cybertool Lite/Review shots/DSC00859.jpg</a>" alt="banner" style="max-width: 100%; height: auto;" /&gt;&lt;/a&gt;</p>
<p dir="auto">I removed all the cards and such, and then I removed the CPU and the heat sync.  this required no tools, but once I got them out, the  CPU was stuck to the heat sync.<br />
This is a result of the old thermal paste.  I used the bottle opener to apply light pressure and pry the CPU off of the inverted heat sync.</p>
<p dir="auto">&lt;a href="<a href="http://s833.photobucket.com/user/detronphillips/media/SAKs/Cybertool%20Lite/Review%20shots/DSC00862.jpg.html" rel="nofollow ugc">http://s833.photobucket.com/user/detronphillips/media/SAKs/Cybertool Lite/Review shots/DSC00862.jpg.html</a>" target="_blank" rel="noopener noreferrer"&gt;&lt;img src="<a href="http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cybertool%20Lite/Review%20shots/DSC00862.jpg" rel="nofollow ugc">http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cybertool Lite/Review shots/DSC00862.jpg</a>" alt="banner" style="max-width: 100%; height: auto;" /&gt;&lt;/a&gt;</p>
<p dir="auto">&lt;a href="<a href="http://s833.photobucket.com/user/detronphillips/media/SAKs/Cybertool%20Lite/Review%20shots/DSC00863.jpg.html" rel="nofollow ugc">http://s833.photobucket.com/user/detronphillips/media/SAKs/Cybertool Lite/Review shots/DSC00863.jpg.html</a>" target="_blank" rel="noopener noreferrer"&gt;&lt;img src="<a href="http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cybertool%20Lite/Review%20shots/DSC00863.jpg" rel="nofollow ugc">http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cybertool Lite/Review shots/DSC00863.jpg</a>" alt="banner" style="max-width: 100%; height: auto;" /&gt;&lt;/a&gt;</p>
<p dir="auto">after cleaning off the thermal paste, we can see what CPU this was.</p>
<p dir="auto">&lt;a href="<a href="http://s833.photobucket.com/user/detronphillips/media/SAKs/Cybertool%20Lite/Review%20shots/DSC00865.jpg.html" rel="nofollow ugc">http://s833.photobucket.com/user/detronphillips/media/SAKs/Cybertool Lite/Review shots/DSC00865.jpg.html</a>" target="_blank" rel="noopener noreferrer"&gt;&lt;img src="<a href="http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cybertool%20Lite/Review%20shots/DSC00865.jpg" rel="nofollow ugc">http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cybertool Lite/Review shots/DSC00865.jpg</a>" alt="banner" style="max-width: 100%; height: auto;" /&gt;&lt;/a&gt;</p>
<p dir="auto">An AMD Sempron from 2001.</p>
<p dir="auto">now to get the motherboard out of the case, I again just used the phillips bit in the bit driver.</p>
<p dir="auto">&lt;a href="<a href="http://s833.photobucket.com/user/detronphillips/media/SAKs/Cybertool%20Lite/Review%20shots/DSC00866.jpg.html" rel="nofollow ugc">http://s833.photobucket.com/user/detronphillips/media/SAKs/Cybertool Lite/Review shots/DSC00866.jpg.html</a>" target="_blank" rel="noopener noreferrer"&gt;&lt;img src="<a href="http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cybertool%20Lite/Review%20shots/DSC00866.jpg" rel="nofollow ugc">http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cybertool Lite/Review shots/DSC00866.jpg</a>" alt="banner" style="max-width: 100%; height: auto;" /&gt;&lt;/a&gt;<br />
&lt;a href="<a href="http://s833.photobucket.com/user/detronphillips/media/SAKs/Cybertool%20Lite/Review%20shots/DSC00867.jpg.html" rel="nofollow ugc">http://s833.photobucket.com/user/detronphillips/media/SAKs/Cybertool Lite/Review shots/DSC00867.jpg.html</a>" target="_blank" rel="noopener noreferrer"&gt;&lt;img src="<a href="http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cybertool%20Lite/Review%20shots/DSC00867.jpg" rel="nofollow ugc">http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cybertool Lite/Review shots/DSC00867.jpg</a>" alt="banner" style="max-width: 100%; height: auto;" /&gt;&lt;/a&gt;</p>
<p dir="auto">The motherboard is completely out of the case, and we need to remove the stand-offs that allow the motherboard to "hover" above the case  wall.<br />
take the bit out of the bit driver and it is a socket that fits these stand-offs like a perfect bit-driver.</p>
<p dir="auto">&lt;a href="<a href="http://s833.photobucket.com/user/detronphillips/media/SAKs/Cybertool%20Lite/Review%20shots/DSC00868.jpg.html" rel="nofollow ugc">http://s833.photobucket.com/user/detronphillips/media/SAKs/Cybertool Lite/Review shots/DSC00868.jpg.html</a>" target="_blank" rel="noopener noreferrer"&gt;&lt;img src="<a href="http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cybertool%20Lite/Review%20shots/DSC00868.jpg" rel="nofollow ugc">http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cybertool Lite/Review shots/DSC00868.jpg</a>" alt="banner" style="max-width: 100%; height: auto;" /&gt;&lt;/a&gt;</p>
<p dir="auto">Now, we are almost done!  I decided to remove the I/O port plate (Input / Output), just used the cap lifter for this</p>
<p dir="auto">&lt;a href="<a href="http://s833.photobucket.com/user/detronphillips/media/SAKs/Cybertool%20Lite/Review%20shots/DSC00869.jpg.html" rel="nofollow ugc">http://s833.photobucket.com/user/detronphillips/media/SAKs/Cybertool Lite/Review shots/DSC00869.jpg.html</a>" target="_blank" rel="noopener noreferrer"&gt;&lt;img src="<a href="http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cybertool%20Lite/Review%20shots/DSC00869.jpg" rel="nofollow ugc">http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cybertool Lite/Review shots/DSC00869.jpg</a>" alt="banner" style="max-width: 100%; height: auto;" /&gt;&lt;/a&gt;<br />
&lt;a href="<a href="http://s833.photobucket.com/user/detronphillips/media/SAKs/Cybertool%20Lite/Review%20shots/DSC00870.jpg.html" rel="nofollow ugc">http://s833.photobucket.com/user/detronphillips/media/SAKs/Cybertool Lite/Review shots/DSC00870.jpg.html</a>" target="_blank" rel="noopener noreferrer"&gt;&lt;img src="<a href="http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cybertool%20Lite/Review%20shots/DSC00870.jpg" rel="nofollow ugc">http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cybertool Lite/Review shots/DSC00870.jpg</a>" alt="banner" style="max-width: 100%; height: auto;" /&gt;&lt;/a&gt;</p>
]]></description><link>https://multitool.ninja/topic/53798/cybertool-lite-field-test-and-review-picture-storm</link><generator>RSS for Node</generator><lastBuildDate>Wed, 18 Nov 2026 11:52:13 GMT</lastBuildDate><atom:link href="https://multitool.ninja/topic/53798.rss" rel="self" type="application/rss+xml"/><pubDate>Mon, 04 Aug 2014 01:12:28 GMT</pubDate><ttl>60</ttl><item><title><![CDATA[Reply to CyberTool Lite Field Test and Review (Picture Storm!) on Fri, 23 Dec 2016 09:16:58 GMT]]></title><description><![CDATA[<p dir="auto">Since this thread was started in ancient times...I wonder if the LED in the OP's LED module was the older, dimmer one...I understand at some point they changed the LED to a brighter one.</p>
]]></description><link>https://multitool.ninja/post/1400277</link><guid isPermaLink="true">https://multitool.ninja/post/1400277</guid><dc:creator><![CDATA[JamesJ]]></dc:creator><pubDate>Fri, 23 Dec 2016 09:16:58 GMT</pubDate></item><item><title><![CDATA[Reply to CyberTool Lite Field Test and Review (Picture Storm!) on Fri, 23 Dec 2016 06:33:48 GMT]]></title><description><![CDATA[<p dir="auto">Built my PC in January 2016. All I used was a CT34 with my phone light and I used my Tread as a second screwdriver when I needed to tighten the bracket for the CPU cooler. Would be the perfect christmas gift for anybody considering building a PC.</p>
<p dir="auto">Got my dad a Mechanic for christmas (he normally rocks a tinker for the last 30 years), he will love it i am sure. Except for the fact that some screws need a little more reach, a mechanic could honestly build a whole PC. A cybertool 29 definitely could, though I mainly got the 34 over the 29 for sake of the pliers (considered modding it to remove the scissors but those are pretty good and dont add a lot of width anyway).</p>
<p dir="auto">Maybe I'll do a challenge to disassemble and reassemble a PC using only a Minichamp II (tweezers, not light). THAT would be fun.</p>
]]></description><link>https://multitool.ninja/post/1400257</link><guid isPermaLink="true">https://multitool.ninja/post/1400257</guid><dc:creator><![CDATA[Tjzm1993]]></dc:creator><pubDate>Fri, 23 Dec 2016 06:33:48 GMT</pubDate></item><item><title><![CDATA[Reply to CyberTool Lite Field Test and Review (Picture Storm!) on Sat, 16 Aug 2014 22:04:19 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/freaver" aria-label="Profile: Freaver">@<bdi>Freaver</bdi></a> <a href="/post/934263">said</a>:<br />
Well, now you've got me wanting to take apart some of my old HDD's, just to get the magnets and plates...  <img src="/assets/uploads/smileys/facepalm.gif" alt=":facepalm:" title="Facepalm" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">I love doing it,  I have taken about 300 apart,  (at work, so those magnets stay there) and 8 or so at home.</p>
]]></description><link>https://multitool.ninja/post/934321</link><guid isPermaLink="true">https://multitool.ninja/post/934321</guid><dc:creator><![CDATA[detron]]></dc:creator><pubDate>Sat, 16 Aug 2014 22:04:19 GMT</pubDate></item><item><title><![CDATA[Reply to CyberTool Lite Field Test and Review (Picture Storm!) on Sat, 16 Aug 2014 19:51:02 GMT]]></title><description><![CDATA[<p dir="auto">Well, now you've got me wanting to take apart some of my old HDD's, just to get the magnets and plates...  <img src="/assets/uploads/smileys/facepalm.gif" alt=":facepalm:" title="Facepalm" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/934263</link><guid isPermaLink="true">https://multitool.ninja/post/934263</guid><dc:creator><![CDATA[Freaver]]></dc:creator><pubDate>Sat, 16 Aug 2014 19:51:02 GMT</pubDate></item><item><title><![CDATA[Reply to CyberTool Lite Field Test and Review (Picture Storm!) on Tue, 05 Aug 2014 17:58:07 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto">@Lynn LeFey <a href="/post/928846">said</a>:<br />
Excellent in-depth review.  <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
<p dir="auto">When I was in IT, even as a programmer, I'd often find myself doing hardware tasks. I think I'd have preferred the ct34, but I can see how some folks might like the light/magnifier layer.</p>
<p dir="auto">I generally find the vic 91mm pliers seriously inferior to the Leatherman keychain size tools, but in the specific instance of jumpers, I think they have a real advantage.</p>
<p dir="auto">I actually have had to cut through drywall in the office environment before, but that was only once, ever, and was solved with a trip to a nearby hardware store and a $2 keyhole saw. Then again, in all my time in IT, I never needed a metal file. Not once that I can recall.</p>
<p dir="auto">It looked to me like the vast majority of the bit-driver work was done with small philips screws. I have to wonder, honestly, how much of this whole thing could have been done with a Mechanic and a Rambler. Not knocking the CT, just trying to be honest here.</p>
<p dir="auto">Had this been back in my IT days, I'd be a lot more excited about this tool. Now, though, The things that it's best at aren't anywhere near my daily need. However, you did an excellent job of showing this tool in it's native environment, and where it really shines.  <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">at work I have used many of the other bits, but if I run across more "bit work" I will add the info here, except for most of the stuff at work,  (no pix allowed)</p>
]]></description><link>https://multitool.ninja/post/928849</link><guid isPermaLink="true">https://multitool.ninja/post/928849</guid><dc:creator><![CDATA[detron]]></dc:creator><pubDate>Tue, 05 Aug 2014 17:58:07 GMT</pubDate></item><item><title><![CDATA[Reply to CyberTool Lite Field Test and Review (Picture Storm!) on Tue, 05 Aug 2014 17:50:56 GMT]]></title><description><![CDATA[<p dir="auto">Excellent in-depth review.  <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
<p dir="auto">When I was in IT, even as a programmer, I'd often find myself doing hardware tasks. I think I'd have preferred the ct34, but I can see how some folks might like the light/magnifier layer.</p>
<p dir="auto">I generally find the vic 91mm pliers seriously inferior to the Leatherman keychain size tools, but in the specific instance of jumpers, I think they have a real advantage.</p>
<p dir="auto">I actually have had to cut through drywall in the office environment before, but that was only once, ever, and was solved with a trip to a nearby hardware store and a $2 keyhole saw. Then again, in all my time in IT, I never needed a metal file. Not once that I can recall.</p>
<p dir="auto">It looked to me like the vast majority of the bit-driver work was done with small philips screws. I have to wonder, honestly, how much of this whole thing could have been done with a Mechanic and a Rambler. Not knocking the CT, just trying to be honest here.</p>
<p dir="auto">Had this been back in my IT days, I'd be a lot more excited about this tool. Now, though, The things that it's best at aren't anywhere near my daily need. However, you did an excellent job of showing this tool in it's native environment, and where it really shines.  <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/928846</link><guid isPermaLink="true">https://multitool.ninja/post/928846</guid><dc:creator><![CDATA[Lynn LeFey]]></dc:creator><pubDate>Tue, 05 Aug 2014 17:50:56 GMT</pubDate></item><item><title><![CDATA[Reply to CyberTool Lite Field Test and Review (Picture Storm!) on Tue, 05 Aug 2014 16:35:19 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/etherealicer" aria-label="Profile: Etherealicer">@<bdi>Etherealicer</bdi></a> <a href="/post/928625">said</a>:<br />
We build with brick and mortar. This makes inside walls (1 layer of bricks) more than 15 cm tick (outside walls are brick | insulation | brick, and are about half a meter thick) :D, so even if the wood saw would get through, it would be too short :P</p>
</blockquote>
<p dir="auto">Yeah, wood saw is pretty useless in that situation.  I put a fish scaler in my custom knife though cause this makes a really great poking tool.  <img src="/assets/uploads/smileys/poke2.gif" alt=":pok:" title="pok" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/928810</link><guid isPermaLink="true">https://multitool.ninja/post/928810</guid><dc:creator><![CDATA[RedRamage]]></dc:creator><pubDate>Tue, 05 Aug 2014 16:35:19 GMT</pubDate></item><item><title><![CDATA[Reply to CyberTool Lite Field Test and Review (Picture Storm!) on Tue, 05 Aug 2014 07:48:27 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/mrynnr" aria-label="Profile: mrynnr">@<bdi>mrynnr</bdi></a> <a href="/post/928582">said</a>:</p>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/etherealicer" aria-label="Profile: Etherealicer">@<bdi>Etherealicer</bdi></a> <a href="/post/928061">said</a>:</p>
<blockquote>
<p dir="auto">Great write-up Detron<br />
Those images you found on the HDD prove that IT-SpeSmurfpillst don't get paid enough <img src="/assets/uploads/smileys/rofl.gif" alt=":rofl:" title="rofl" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/corwyn" aria-label="Profile: Corwyn">@<bdi>Corwyn</bdi></a> <a href="/post/928054">said</a>:</p>
<blockquote>
<blockquote>
<p dir="auto">Just to play Devil's Advocate... Pliers, Cap Lifter, Philips and blade... so a 3-layer Mechanic could do this too?  <img src="/assets/uploads/smileys/whistle.gif" alt=":whistle:" title="Whistle" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">No <img src="/assets/uploads/smileys/twakfl.gif" alt=":twak:" title="twak" class="forum-smiley emoji" />, he also used the Torx (and he would have used torx more on a Mac or on a newer PC). :P</p>
<p dir="auto">I regularly use T6, T8, T10, T15, PH0, PH1 when dealing with computers, clearly that is CyberTool Territory. What annoys me is that you either have no metal file or you get metal file AND wood saw (what am I supposed to do with a wood saw in an office environment <img src="/assets/uploads/smileys/thinking.gif" alt=":think:" title="Thinking" class="forum-smiley emoji" />).</p>
</blockquote>
<p dir="auto">maybe you have to cut a hole in the wall for Ethernet ports? Lol</p>
</blockquote>
<p dir="auto">We build with brick and mortar. This makes inside walls (1 layer of bricks) more than 15 cm tick (outside walls are brick | insulation | brick, and are about half a meter thick) :D, so even if the wood saw would get through, it would be too short :P</p>
<p dir="auto">Its also the reason why we love wireless, far easier.</p>
]]></description><link>https://multitool.ninja/post/928625</link><guid isPermaLink="true">https://multitool.ninja/post/928625</guid><dc:creator><![CDATA[Etherealicer]]></dc:creator><pubDate>Tue, 05 Aug 2014 07:48:27 GMT</pubDate></item><item><title><![CDATA[Reply to CyberTool Lite Field Test and Review (Picture Storm!) on Tue, 05 Aug 2014 03:22:38 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/etherealicer" aria-label="Profile: Etherealicer">@<bdi>Etherealicer</bdi></a> <a href="/post/928061">said</a>:<br />
Great write-up Detron<br />
Those images you found on the HDD prove that IT-SpeSmurfpillst don't get paid enough <img src="/assets/uploads/smileys/rofl.gif" alt=":rofl:" title="rofl" class="forum-smiley emoji" /></p>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/corwyn" aria-label="Profile: Corwyn">@<bdi>Corwyn</bdi></a> <a href="/post/928054">said</a>:</p>
<blockquote>
<p dir="auto">Just to play Devil's Advocate... Pliers, Cap Lifter, Philips and blade... so a 3-layer Mechanic could do this too?  <img src="/assets/uploads/smileys/whistle.gif" alt=":whistle:" title="Whistle" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">No <img src="/assets/uploads/smileys/twakfl.gif" alt=":twak:" title="twak" class="forum-smiley emoji" />, he also used the Torx (and he would have used torx more on a Mac or on a newer PC). :P</p>
<p dir="auto">I regularly use T6, T8, T10, T15, PH0, PH1 when dealing with computers, clearly that is CyberTool Territory. What annoys me is that you either have no metal file or you get metal file AND wood saw (what am I supposed to do with a wood saw in an office environment <img src="/assets/uploads/smileys/thinking.gif" alt=":think:" title="Thinking" class="forum-smiley emoji" />).</p>
</blockquote>
<p dir="auto">maybe you have to cut a hole in the wall for Ethernet ports? Lol</p>
]]></description><link>https://multitool.ninja/post/928582</link><guid isPermaLink="true">https://multitool.ninja/post/928582</guid><dc:creator><![CDATA[mrynnr]]></dc:creator><pubDate>Tue, 05 Aug 2014 03:22:38 GMT</pubDate></item><item><title><![CDATA[Reply to CyberTool Lite Field Test and Review (Picture Storm!) on Mon, 04 Aug 2014 22:31:00 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/comis" aria-label="Profile: comis">@<bdi>comis</bdi></a> <a href="/post/928328">said</a>:<br />
Thank you for such detail write up and pictures, I felt I just lived thru a day via your Vic!  <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /></p>
<p dir="auto">And why did I think of Bender in Futurama when I see the reflection in the hard disk?  :D</p>
</blockquote>
<p dir="auto">Cos he has a shinny metal...</p>
]]></description><link>https://multitool.ninja/post/928491</link><guid isPermaLink="true">https://multitool.ninja/post/928491</guid><dc:creator><![CDATA[kirk13]]></dc:creator><pubDate>Mon, 04 Aug 2014 22:31:00 GMT</pubDate></item><item><title><![CDATA[Reply to CyberTool Lite Field Test and Review (Picture Storm!) on Mon, 04 Aug 2014 21:48:18 GMT]]></title><description><![CDATA[<p dir="auto">Here is my modded one thanks to Detron and GigaHz.  Thanks again guys!  <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /></p>
<p dir="auto">Its just a CT34 with the mag/philips layer added.  I thought about a "lite" layer at one time but dont really like them and I have a seperate AAA light that to me works better.</p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/127548_CT34_maglayer.jpg" alt="CT34_maglayer.jpg" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/928466</link><guid isPermaLink="true">https://multitool.ninja/post/928466</guid><dc:creator><![CDATA[sir_mike]]></dc:creator><pubDate>Mon, 04 Aug 2014 21:48:18 GMT</pubDate></item><item><title><![CDATA[Reply to CyberTool Lite Field Test and Review (Picture Storm!) on Mon, 04 Aug 2014 20:05:02 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/detron" aria-label="Profile: detron">@<bdi>detron</bdi></a> <a href="/post/928285">said</a>:<br />
&lt;a href="<a href="http://s833.photobucket.com/user/detronphillips/media/SAKs/custom%201/20140322_164028.jpg.html" rel="nofollow ugc">http://s833.photobucket.com/user/detronphillips/media/SAKs/custom 1/20140322_164028.jpg.html</a>" target="_blank" rel="noopener noreferrer"&gt;&lt;img src="<a href="http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/custom%201/20140322_164028.jpg" rel="nofollow ugc">http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/custom 1/20140322_164028.jpg</a>" alt="banner" style="max-width: 100%; height: auto;" /&gt;&lt;/a&gt;</p>
<p dir="auto">I love the new file, and though I know a saw can be useful outside, inside it is rarely needed.</p>
</blockquote>
<p dir="auto">Hey... that's looks a LOT like my custom knife!  The only difference is that I have a watch opener blade and a combo tool opposite the two main blades.  And I took out the layer with the openers... oh, and I added a fish scaler.</p>
]]></description><link>https://multitool.ninja/post/928412</link><guid isPermaLink="true">https://multitool.ninja/post/928412</guid><dc:creator><![CDATA[RedRamage]]></dc:creator><pubDate>Mon, 04 Aug 2014 20:05:02 GMT</pubDate></item><item><title><![CDATA[Reply to CyberTool Lite Field Test and Review (Picture Storm!) on Mon, 04 Aug 2014 20:01:03 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/detron" aria-label="Profile: detron">@<bdi>detron</bdi></a> <a href="/post/928256">said</a>:<br />
I agree the LED light on this SAK is not that bright,  but if it is all you have (NOT LIKELY, but whatever) it will illuminate things enough to distinguish what is what.</p>
<p dir="auto">as a person who loves having the Mag glass, the LED light is a nice tool to be opposite the Mag glass.</p>
</blockquote>
<p dir="auto">I'm going to respectfully disagree here.  I found the LED to be virtually useless.  The problem I had with my Cybertool Lite was that the switch kept going on it my pocket.  I'd usually burn through batteries in no time at all.  When I needed the light much more often than not the batteries were either dead or so close to dead that the already dim light was useless.</p>
<p dir="auto">I really wanted to to love the light... and I think they did a VERY good job of putting in inline with the bit driver so you could use it to illuminate where you were putting the screw driver... but the dim LED along with a poor switch design made it unreliable... and therefore useless for me.</p>
<blockquote>
<p dir="auto">on my main carry (Cyber-Yeoman) I have a Phillips opposite the mag glass., but this is not a common factory model.</p>
</blockquote>
<p dir="auto">Is it standard on any model?</p>
<blockquote>
<p dir="auto">the reason I love the CT Lite is for a factory model, I get the Bit Driver, mag glass, pliers, scissors, openers, blades, etc.</p>
</blockquote>
<p dir="auto">Can't disagree with anything there.  All great tools, all things I use regularly.</p>
<blockquote>
<p dir="auto">the light is an extra, if I did not love the Mag Glass, then I would have been happier with a CT34 or CT41</p>
</blockquote>
<p dir="auto">My main carry is a modified CT.  It has (among other things) the phillips against the mag glass.  Not strictly needed as the bit driver has a large(ish) phillips, but it's nice to have a big thick one to really apply some torque on stuck big screws.</p>
]]></description><link>https://multitool.ninja/post/928411</link><guid isPermaLink="true">https://multitool.ninja/post/928411</guid><dc:creator><![CDATA[RedRamage]]></dc:creator><pubDate>Mon, 04 Aug 2014 20:01:03 GMT</pubDate></item><item><title><![CDATA[Reply to CyberTool Lite Field Test and Review (Picture Storm!) on Mon, 04 Aug 2014 18:35:12 GMT]]></title><description><![CDATA[<p dir="auto">I figured "Picture Storm" was a fitting label   <img src="/assets/uploads/smileys/rofl.gif" alt=":rofl:" title="rofl" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/928359</link><guid isPermaLink="true">https://multitool.ninja/post/928359</guid><dc:creator><![CDATA[detron]]></dc:creator><pubDate>Mon, 04 Aug 2014 18:35:12 GMT</pubDate></item><item><title><![CDATA[Reply to CyberTool Lite Field Test and Review (Picture Storm!) on Mon, 04 Aug 2014 18:34:01 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/enki-ck" aria-label="Profile: enki_ck">@<bdi>enki_ck</bdi></a> <a href="/post/928356">said</a>:<br />
Wow</p>
<p dir="auto">Now this is a photo heavy thread. :D</p>
<p dir="auto">I'll report back in a week when I'm done viewing it all. ;)</p>
</blockquote>
<p dir="auto">Huh, is your internet that quick?  :D</p>
]]></description><link>https://multitool.ninja/post/928358</link><guid isPermaLink="true">https://multitool.ninja/post/928358</guid><dc:creator><![CDATA[bmot]]></dc:creator><pubDate>Mon, 04 Aug 2014 18:34:01 GMT</pubDate></item><item><title><![CDATA[Reply to CyberTool Lite Field Test and Review (Picture Storm!) on Mon, 04 Aug 2014 18:31:47 GMT]]></title><description><![CDATA[<p dir="auto">Wow</p>
<p dir="auto">Now this is a photo heavy thread. :D</p>
<p dir="auto">I'll report back in a week when I'm done viewing it all. ;)</p>
]]></description><link>https://multitool.ninja/post/928356</link><guid isPermaLink="true">https://multitool.ninja/post/928356</guid><dc:creator><![CDATA[enki_ck]]></dc:creator><pubDate>Mon, 04 Aug 2014 18:31:47 GMT</pubDate></item><item><title><![CDATA[Reply to CyberTool Lite Field Test and Review (Picture Storm!) on Mon, 04 Aug 2014 18:23:49 GMT]]></title><description><![CDATA[<p dir="auto">You be pimpin' dat cybertewl  <img src="/assets/uploads/smileys/1196453940-SAKgif.gif" alt=":climber:" title=":climber:" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/928347</link><guid isPermaLink="true">https://multitool.ninja/post/928347</guid><dc:creator><![CDATA[sawman]]></dc:creator><pubDate>Mon, 04 Aug 2014 18:23:49 GMT</pubDate></item><item><title><![CDATA[Reply to CyberTool Lite Field Test and Review (Picture Storm!) on Mon, 04 Aug 2014 18:20:58 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto">@Dragon Lord <a href="/post/928340">said</a>:<br />
Great review</p>
<p dir="auto">Now I want a Cibertool  <img src="/assets/uploads/smileys/gimme.gif" alt=":gimme:" title="gimme" class="forum-smiley emoji" /></p>
<p dir="auto">I'm in IT so why did'nt I have a CT? <img src="/assets/uploads/smileys/facepalm.gif" alt=":facepalm:" title="Facepalm" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto"><img src="http://markgredler.files.wordpress.com/2013/08/do-it-now.jpg" alt="" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/928345</link><guid isPermaLink="true">https://multitool.ninja/post/928345</guid><dc:creator><![CDATA[detron]]></dc:creator><pubDate>Mon, 04 Aug 2014 18:20:58 GMT</pubDate></item><item><title><![CDATA[Reply to CyberTool Lite Field Test and Review (Picture Storm!) on Mon, 04 Aug 2014 17:53:53 GMT]]></title><description><![CDATA[<p dir="auto">Great review</p>
<p dir="auto">Now I want a Cibertool  <img src="/assets/uploads/smileys/gimme.gif" alt=":gimme:" title="gimme" class="forum-smiley emoji" /></p>
<p dir="auto">I'm in IT so why did'nt I have a CT? <img src="/assets/uploads/smileys/facepalm.gif" alt=":facepalm:" title="Facepalm" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/928340</link><guid isPermaLink="true">https://multitool.ninja/post/928340</guid><dc:creator><![CDATA[Dragon Lord]]></dc:creator><pubDate>Mon, 04 Aug 2014 17:53:53 GMT</pubDate></item><item><title><![CDATA[Reply to CyberTool Lite Field Test and Review (Picture Storm!) on Mon, 04 Aug 2014 17:32:20 GMT]]></title><description><![CDATA[<p dir="auto">Thank you for such detail write up and pictures, I felt I just lived thru a day via your Vic!  <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /></p>
<p dir="auto">And why did I think of Bender in Futurama when I see the reflection in the hard disk?  :D</p>
]]></description><link>https://multitool.ninja/post/928328</link><guid isPermaLink="true">https://multitool.ninja/post/928328</guid><dc:creator><![CDATA[comis]]></dc:creator><pubDate>Mon, 04 Aug 2014 17:32:20 GMT</pubDate></item><item><title><![CDATA[Reply to CyberTool Lite Field Test and Review (Picture Storm!) on Mon, 04 Aug 2014 17:14:25 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/neillcurrie" aria-label="Profile: neillcurrie">@<bdi>neillcurrie</bdi></a> <a href="/post/928316">said</a>:<br />
I went out today to track down some appropriate small magnets to JB weld inside my Cybertool bit driver.<br />
Finally found some very small ones at RadioShack. However, the smallest they had measured a hair under 5mm diameter, by 1.5mm thick. No problem, I thought, I'll just Dremel the edge a little till I can drive it in, or glue it in.<br />
Let me tell you: a Dremel and parting disc removes almost all the magnetic properties of the magnet very quickly.<br />
Now I am searching for (more)smaller diameter magnets again. Where do you guys find them? I am loath to buy a pack of 100 at Amazon, when I'll use just 2 at the most.</p>
</blockquote>
<p dir="auto">PM inbound</p>
]]></description><link>https://multitool.ninja/post/928318</link><guid isPermaLink="true">https://multitool.ninja/post/928318</guid><dc:creator><![CDATA[detron]]></dc:creator><pubDate>Mon, 04 Aug 2014 17:14:25 GMT</pubDate></item><item><title><![CDATA[Reply to CyberTool Lite Field Test and Review (Picture Storm!) on Mon, 04 Aug 2014 17:12:30 GMT]]></title><description><![CDATA[<p dir="auto">I went out today to track down some appropriate small magnets to JB weld inside my Cybertool bit driver.<br />
Finally found some very small ones at RadioShack. However, the smallest they had measured a hair under 5mm diameter, by 1.5mm thick. No problem, I thought, I'll just Dremel the edge a little till I can drive it in, or glue it in.<br />
Let me tell you: a Dremel and parting disc removes almost all the magnetic properties of the magnet very quickly.<br />
Now I am searching for (more)smaller diameter magnets again. Where do you guys find them? I am loath to buy a pack of 100 at Amazon, when I'll use just 2 at the most.</p>
]]></description><link>https://multitool.ninja/post/928316</link><guid isPermaLink="true">https://multitool.ninja/post/928316</guid><dc:creator><![CDATA[neillcurrie]]></dc:creator><pubDate>Mon, 04 Aug 2014 17:12:30 GMT</pubDate></item><item><title><![CDATA[Reply to CyberTool Lite Field Test and Review (Picture Storm!) on Mon, 04 Aug 2014 16:57:28 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/sawman" aria-label="Profile: sawman">@<bdi>sawman</bdi></a> <a href="/post/928301">said</a>:</p>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/reinier" aria-label="Profile: Reinier">@<bdi>Reinier</bdi></a> <a href="/post/928298">said</a>:</p>
<blockquote></blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/detron" aria-label="Profile: detron">@<bdi>detron</bdi></a> <a href="/post/928285">said</a>:</p>
<blockquote>
<blockquote>
<p dir="auto">funny that you sawman feel this way   <img src="/assets/uploads/smileys/rofl.gif" alt=":rofl:" title="rofl" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">I <strong>saw</strong> what you did there  <img src="/assets/uploads/smileys/facepalm.gif" alt=":facepalm:" title="Facepalm" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">Those are my initials  <img src="/assets/uploads/smileys/twakfl.gif" alt=":twak:" title="twak" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/twakfl.gif" alt=":twak:" title="twak" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/twakfl.gif" alt=":twak:" title="twak" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">had no idea,  when I read it, it is always saw, not S.A.W.   <img src="/assets/uploads/smileys/whistle.gif" alt=":whistle:" title="Whistle" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/928310</link><guid isPermaLink="true">https://multitool.ninja/post/928310</guid><dc:creator><![CDATA[detron]]></dc:creator><pubDate>Mon, 04 Aug 2014 16:57:28 GMT</pubDate></item><item><title><![CDATA[Reply to CyberTool Lite Field Test and Review (Picture Storm!) on Mon, 04 Aug 2014 16:44:14 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/reinier" aria-label="Profile: Reinier">@<bdi>Reinier</bdi></a> <a href="/post/928298">said</a>:</p>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/detron" aria-label="Profile: detron">@<bdi>detron</bdi></a> <a href="/post/928285">said</a>:</p>
<blockquote>
<p dir="auto">funny that you sawman feel this way   <img src="/assets/uploads/smileys/rofl.gif" alt=":rofl:" title="rofl" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">I <strong>saw</strong> what you did there  <img src="/assets/uploads/smileys/facepalm.gif" alt=":facepalm:" title="Facepalm" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">Those are my initials  <img src="/assets/uploads/smileys/twakfl.gif" alt=":twak:" title="twak" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/twakfl.gif" alt=":twak:" title="twak" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/twakfl.gif" alt=":twak:" title="twak" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/928301</link><guid isPermaLink="true">https://multitool.ninja/post/928301</guid><dc:creator><![CDATA[sawman]]></dc:creator><pubDate>Mon, 04 Aug 2014 16:44:14 GMT</pubDate></item></channel></rss>