<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0"><channel><title><![CDATA[LM ReCharge with a twist]]></title><description><![CDATA[<p dir="auto">Finally got around to finish my 'Oxy-ReCharge' project today.  :ahhh</p>
<p dir="auto">Since for me the MTs need to not only work well but must also look good (Zoidberg, get that smirk off your face! ;)) I sometimes put a little too much emphasis on the appearance, but can't help it, sorry  8)</p>
<p dir="auto">So I decided to oxidize the Ti scales to force that well known darker shade of Titanium that normally takes years to develop by a normal oxidation process, plus few extra details you don't see everyday done on an MT.</p>
<p dir="auto">Mods:</p>
<ul>
<li>
<p dir="auto">Swapped stock Charge pliers with the Rebar pliers with replaceable wire cutters.</p>
</li>
<li>
<p dir="auto">Awl also from Rebar - this one wasn't a simple drop in as it required a little bit of 'meat' taken off the top arch closer to the tip so that the pliers would close properly inside the handle.</p>
</li>
<li>
<p dir="auto">Oxidized Ti scales; although not that visible from the photos, these are now 2-3 shades of gray darker than the original Ti scales. I'll see if I can borrow a standard Charge TTi from a colleague of mine sometime next week for comparison photo.</p>
</li>
<li>
<p dir="auto">Blued pivot screws; I originally wanted to acid etch these but like the blued finish better this time as it's near perfect fit with the Ti scales, almost identical. You wouldn't tell the scales and screws are made from a two very different materials.</p>
</li>
<li>
<p dir="auto">Flattened the dome on screws. While I like button top screws very much, I found a flattened top being in sync with the flat edges of the Ti scales. You may like this or not, but I believe LM should have included slightly flatter screws on a factory standard Charge.</p>
</li>
</ul>
<p dir="auto">Anyway, that's about it and I'm really stoked how it all came out in the end.  <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /></p>
<p dir="auto"><img src="https://farm4.staticflickr.com/3934/15590773305_50d0132ec2_o_d.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="https://farm6.staticflickr.com/5607/14970030444_c31266c703_k_d.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="https://farm4.staticflickr.com/3937/15404770387_91446ec1b6_o_d.jpg" alt="" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/topic/55262/lm-recharge-with-a-twist</link><generator>RSS for Node</generator><lastBuildDate>Tue, 17 Nov 2026 14:51:01 GMT</lastBuildDate><atom:link href="https://multitool.ninja/topic/55262.rss" rel="self" type="application/rss+xml"/><pubDate>Tue, 21 Oct 2014 10:19:22 GMT</pubDate><ttl>60</ttl><item><title><![CDATA[Reply to LM ReCharge with a twist on Mon, 20 Jun 2016 18:42:35 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/babola" aria-label="Profile: babola">@<bdi>babola</bdi></a> <a href="/post/1286538">said</a>:<br />
To darken Titanium, it has to oxidize. I use simple and cheap method with Napisan, OxyClean or any other oxidizing stain remover you can find in your local supermarket.</p>
<p dir="auto">Warm up the water in a small container, add powder (approx 1 Tbsp per cup of hot water), agitate slowly and wait. Remove the Ti bits from liquid and wash under the tap. Repeat as required to reach desired darkness.</p>
<p dir="auto">Nothing to it, really.</p>
</blockquote>
<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/babola" aria-label="Profile: babola">@<bdi>babola</bdi></a> <a href="/post/1286542">said</a>:</p>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/zoidberg" aria-label="Profile: zoidberg">@<bdi>zoidberg</bdi></a> <a href="/post/1286527">said</a>:</p>
<blockquote>
<p dir="auto"><a href="/topic/56530">Babola's Acid Wave project</a></p>
</blockquote>
<p dir="auto">That method (acid etching using ferric chloride) works on steel, copper etc but doesn't on Ti, unfortunately.<br />
Ti darkens thru oxidation.   :)</p>
</blockquote>
<p dir="auto">thank you, very appreciate it  <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /> ... I will do looking for stain removal available here and try :)</p>
]]></description><link>https://multitool.ninja/post/1287139</link><guid isPermaLink="true">https://multitool.ninja/post/1287139</guid><dc:creator><![CDATA[titohendrata]]></dc:creator><pubDate>Mon, 20 Jun 2016 18:42:35 GMT</pubDate></item><item><title><![CDATA[Reply to LM ReCharge with a twist on Mon, 20 Jun 2016 13:42:28 GMT]]></title><description><![CDATA[<p dir="auto">Very nice!!</p>
<p dir="auto">Sent from my iPhone using Tapatalk</p>
]]></description><link>https://multitool.ninja/post/1286772</link><guid isPermaLink="true">https://multitool.ninja/post/1286772</guid><dc:creator><![CDATA[G-Dizzle]]></dc:creator><pubDate>Mon, 20 Jun 2016 13:42:28 GMT</pubDate></item><item><title><![CDATA[Reply to LM ReCharge with a twist on Mon, 20 Jun 2016 12:15:23 GMT]]></title><description><![CDATA[<p dir="auto">Babola is quite the Inspiration, his acid wave thread convinced me to create my Blue Collar Surge. And now my Charge TTi is in peices waiting for oxidation and new parts.......</p>
<p dir="auto">Instead of liquid or electrical oxidation I may really slow it down with some direct heat.</p>
]]></description><link>https://multitool.ninja/post/1286692</link><guid isPermaLink="true">https://multitool.ninja/post/1286692</guid><dc:creator><![CDATA[NKlamerus]]></dc:creator><pubDate>Mon, 20 Jun 2016 12:15:23 GMT</pubDate></item><item><title><![CDATA[Reply to LM ReCharge with a twist on Mon, 20 Jun 2016 10:22:43 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/babola" aria-label="Profile: babola">@<bdi>babola</bdi></a> <a href="/post/1286542">said</a>:</p>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/zoidberg" aria-label="Profile: zoidberg">@<bdi>zoidberg</bdi></a> <a href="/post/1286527">said</a>:</p>
<blockquote>
<p dir="auto"><a href="/topic/56530">Babola's Acid Wave project</a></p>
</blockquote>
<p dir="auto">That method (acid etching using ferric chloride) works on steel, copper etc but doesn't on Ti, unfortunately.<br />
Ti darkens thru oxidation.   :)</p>
</blockquote>
<p dir="auto">Yeah I completely misread and misinterpreted this.   <img src="/assets/uploads/smileys/facepalm.gif" alt=":facepalm:" title="Facepalm" class="forum-smiley emoji" />   <img src="/assets/uploads/smileys/facepalm.gif" alt=":facepalm:" title="Facepalm" class="forum-smiley emoji" />   Happens.   :kirky:</p>
<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/babola" aria-label="Profile: babola">@<bdi>babola</bdi></a> <a href="/post/1011132">said</a>:<br />
Secondly, after I posted my Oxy-ReCharge mod over at EDCF couple of members over there asked me if I could post my next mod in steps, kind of tutorial style.</p>
</blockquote>
]]></description><link>https://multitool.ninja/post/1286550</link><guid isPermaLink="true">https://multitool.ninja/post/1286550</guid><dc:creator><![CDATA[zoidberg]]></dc:creator><pubDate>Mon, 20 Jun 2016 10:22:43 GMT</pubDate></item><item><title><![CDATA[Reply to LM ReCharge with a twist on Mon, 20 Jun 2016 10:10:18 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/zoidberg" aria-label="Profile: zoidberg">@<bdi>zoidberg</bdi></a> <a href="/post/1286527">said</a>:<br />
<a href="/topic/56530">Babola's Acid Wave project</a></p>
</blockquote>
<p dir="auto">That method (acid etching using ferric chloride) works on steel, copper etc but doesn't on Ti, unfortunately.<br />
Ti darkens thru oxidation.   :)</p>
]]></description><link>https://multitool.ninja/post/1286542</link><guid isPermaLink="true">https://multitool.ninja/post/1286542</guid><dc:creator><![CDATA[babola]]></dc:creator><pubDate>Mon, 20 Jun 2016 10:10:18 GMT</pubDate></item><item><title><![CDATA[Reply to LM ReCharge with a twist on Mon, 20 Jun 2016 10:07:38 GMT]]></title><description><![CDATA[<p dir="auto">To darken Titanium, it has to oxidize. I use simple and cheap method with Napisan, OxyClean or any other oxidizing stain remover you can find in your local supermarket.</p>
<p dir="auto">Warm up the water in a small container, add powder (approx 1 Tbsp per cup of hot water), agitate slowly and wait. Remove the Ti bits from liquid and wash under the tap. Repeat as required to reach desired darkness.</p>
<p dir="auto">Nothing to it, really.</p>
]]></description><link>https://multitool.ninja/post/1286538</link><guid isPermaLink="true">https://multitool.ninja/post/1286538</guid><dc:creator><![CDATA[babola]]></dc:creator><pubDate>Mon, 20 Jun 2016 10:07:38 GMT</pubDate></item><item><title><![CDATA[Reply to LM ReCharge with a twist on Mon, 20 Jun 2016 09:50:41 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/titohendrata" aria-label="Profile: titohendrata">@<bdi>titohendrata</bdi></a> <a href="/post/1286518">said</a>:</p>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/babola" aria-label="Profile: babola">@<bdi>babola</bdi></a> <a href="/post/967332">said</a>:</p>
<blockquote>
<p dir="auto">Finally got around to finish my 'Oxy-ReCharge' project today.  :ahhh</p>
<p dir="auto">Since for me the MTs need to not only work well but must also look good (Zoidberg, get that smirk off your face! ;)) I sometimes put a little too much emphasis on the appearance, but can't help it, sorry  8)</p>
<p dir="auto">So I decided to oxidize the Ti scales to force that well known darker shade of Titanium that normally takes years to develop by a normal oxidation process, plus few extra details you don't see everyday done on an MT.</p>
<p dir="auto">Mods:</p>
<ul>
<li>
<p dir="auto">Swapped stock Charge pliers with the Rebar pliers with replaceable wire cutters.</p>
</li>
<li>
<p dir="auto">Awl also from Rebar - this one wasn't a simple drop in as it required a little bit of 'meat' taken off the top arch closer to the tip so that the pliers would close properly inside the handle.</p>
</li>
<li>
<p dir="auto">Oxidized Ti scales; although not that visible from the photos, these are now 2-3 shades of gray darker than the original Ti scales. I'll see if I can borrow a standard Charge TTi from a colleague of mine sometime next week for comparison photo.</p>
</li>
<li>
<p dir="auto">Blued pivot screws; I originally wanted to acid etch these but like the blued finish better this time as it's near perfect fit with the Ti scales, almost identical. You wouldn't tell the scales and screws are made from a two very different materials.</p>
</li>
<li>
<p dir="auto">Flattened the dome on screws. While I like button top screws very much, I found a flattened top being in sync with the flat edges of the Ti scales. You may like this or not, but I believe LM should have included slightly flatter screws on a factory standard Charge.</p>
</li>
</ul>
<p dir="auto">Anyway, that's about it and I'm really stoked how it all came out in the end.  <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /></p>
<p dir="auto"><img src="https://farm4.staticflickr.com/3934/15590773305_50d0132ec2_o_d.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="https://farm6.staticflickr.com/5607/14970030444_c31266c703_k_d.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="https://farm4.staticflickr.com/3937/15404770387_91446ec1b6_o_d.jpg" alt="" class="img-markdown  img-fluid" /></p>
</blockquote>
<p dir="auto">wow! amazing! ... very good works ...<br />
can you please tell me how you darken the titanium?</p>
</blockquote>
<p dir="auto"><a href="/topic/56530">Babola's Acid Wave project</a></p>
]]></description><link>https://multitool.ninja/post/1286527</link><guid isPermaLink="true">https://multitool.ninja/post/1286527</guid><dc:creator><![CDATA[zoidberg]]></dc:creator><pubDate>Mon, 20 Jun 2016 09:50:41 GMT</pubDate></item><item><title><![CDATA[Reply to LM ReCharge with a twist on Mon, 20 Jun 2016 09:34:56 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/babola" aria-label="Profile: babola">@<bdi>babola</bdi></a> <a href="/post/967705">said</a>:</p>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/pietervn" aria-label="Profile: pietervn">@<bdi>pietervn</bdi></a> <a href="/post/967702">said</a>:</p>
<blockquote>
<p dir="auto">G'Day,</p>
<p dir="auto">That looks REALLY good. I'm a big fan of the Ti Charge, and darkening the scales looks fantastic. Would you mind sharing how you did it?</p>
<p dir="auto">I have heated a set of scales for the rainbow effect, but I think this looks very nice, almost gunmetal gray. Never thought about the screws, I might give them a bit of heat...  :D</p>
<p dir="auto">Well done,</p>
<p dir="auto">Pete</p>
</blockquote>
<p dir="auto">Thanks mate...not hard, oxidized them for about 15mins. Will drop you a PM. Cheers.</p>
</blockquote>
<p dir="auto">PM me too, please  <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1286520</link><guid isPermaLink="true">https://multitool.ninja/post/1286520</guid><dc:creator><![CDATA[titohendrata]]></dc:creator><pubDate>Mon, 20 Jun 2016 09:34:56 GMT</pubDate></item><item><title><![CDATA[Reply to LM ReCharge with a twist on Mon, 20 Jun 2016 09:29:49 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/babola" aria-label="Profile: babola">@<bdi>babola</bdi></a> <a href="/post/967332">said</a>:<br />
Finally got around to finish my 'Oxy-ReCharge' project today.  :ahhh</p>
<p dir="auto">Since for me the MTs need to not only work well but must also look good (Zoidberg, get that smirk off your face! ;)) I sometimes put a little too much emphasis on the appearance, but can't help it, sorry  8)</p>
<p dir="auto">So I decided to oxidize the Ti scales to force that well known darker shade of Titanium that normally takes years to develop by a normal oxidation process, plus few extra details you don't see everyday done on an MT.</p>
<p dir="auto">Mods:</p>
<ul>
<li>
<p dir="auto">Swapped stock Charge pliers with the Rebar pliers with replaceable wire cutters.</p>
</li>
<li>
<p dir="auto">Awl also from Rebar - this one wasn't a simple drop in as it required a little bit of 'meat' taken off the top arch closer to the tip so that the pliers would close properly inside the handle.</p>
</li>
<li>
<p dir="auto">Oxidized Ti scales; although not that visible from the photos, these are now 2-3 shades of gray darker than the original Ti scales. I'll see if I can borrow a standard Charge TTi from a colleague of mine sometime next week for comparison photo.</p>
</li>
<li>
<p dir="auto">Blued pivot screws; I originally wanted to acid etch these but like the blued finish better this time as it's near perfect fit with the Ti scales, almost identical. You wouldn't tell the scales and screws are made from a two very different materials.</p>
</li>
<li>
<p dir="auto">Flattened the dome on screws. While I like button top screws very much, I found a flattened top being in sync with the flat edges of the Ti scales. You may like this or not, but I believe LM should have included slightly flatter screws on a factory standard Charge.</p>
</li>
</ul>
<p dir="auto">Anyway, that's about it and I'm really stoked how it all came out in the end.  <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /></p>
<p dir="auto"><img src="https://farm4.staticflickr.com/3934/15590773305_50d0132ec2_o_d.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="https://farm6.staticflickr.com/5607/14970030444_c31266c703_k_d.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="https://farm4.staticflickr.com/3937/15404770387_91446ec1b6_o_d.jpg" alt="" class="img-markdown  img-fluid" /></p>
</blockquote>
<p dir="auto">wow! amazing! ... very good works ...<br />
can you please tell me how you darken the titanium?</p>
]]></description><link>https://multitool.ninja/post/1286518</link><guid isPermaLink="true">https://multitool.ninja/post/1286518</guid><dc:creator><![CDATA[titohendrata]]></dc:creator><pubDate>Mon, 20 Jun 2016 09:29:49 GMT</pubDate></item><item><title><![CDATA[Reply to LM ReCharge with a twist on Tue, 23 Feb 2016 23:21:46 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/babola" aria-label="Profile: babola">@<bdi>babola</bdi></a> <a href="/post/1231688">said</a>:</p>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/psycopyro" aria-label="Profile: Psycopyro">@<bdi>Psycopyro</bdi></a> <a href="/post/1231171">said</a>:</p>
<blockquote>
<p dir="auto">Nice one, with superb finish!</p>
<p dir="auto">What is the method for oxidizing? By heating or something like that?</p>
</blockquote>
<p dir="auto">OXYAction, Napisan etc laundry whitening/brightening products you can get for few $$ in supermarkets.</p>
<p dir="auto">Simple and cheap, but very effective.</p>
</blockquote>
<p dir="auto">uh  that's beautiful, do you have a link to a tutorial at hand?</p>
<p dir="auto">thanks!</p>
]]></description><link>https://multitool.ninja/post/1231695</link><guid isPermaLink="true">https://multitool.ninja/post/1231695</guid><dc:creator><![CDATA[danilo]]></dc:creator><pubDate>Tue, 23 Feb 2016 23:21:46 GMT</pubDate></item><item><title><![CDATA[Reply to LM ReCharge with a twist on Tue, 23 Feb 2016 23:09:36 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/stolnme1" aria-label="Profile: stolnme1">@<bdi>stolnme1</bdi></a> <a href="/post/1231340">said</a>:<br />
that's bad a$$</p>
</blockquote>
<p dir="auto">Thanks man.</p>
]]></description><link>https://multitool.ninja/post/1231690</link><guid isPermaLink="true">https://multitool.ninja/post/1231690</guid><dc:creator><![CDATA[babola]]></dc:creator><pubDate>Tue, 23 Feb 2016 23:09:36 GMT</pubDate></item><item><title><![CDATA[Reply to LM ReCharge with a twist on Tue, 23 Feb 2016 23:09:16 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/psycopyro" aria-label="Profile: Psycopyro">@<bdi>Psycopyro</bdi></a> <a href="/post/1231171">said</a>:<br />
Nice one, with superb finish!</p>
<p dir="auto">What is the method for oxidizing? By heating or something like that?</p>
</blockquote>
<p dir="auto">OXYAction, Napisan etc laundry whitening/brightening products you can get for few $$ in supermarkets.</p>
<p dir="auto">Simple and cheap, but very effective.</p>
]]></description><link>https://multitool.ninja/post/1231688</link><guid isPermaLink="true">https://multitool.ninja/post/1231688</guid><dc:creator><![CDATA[babola]]></dc:creator><pubDate>Tue, 23 Feb 2016 23:09:16 GMT</pubDate></item><item><title><![CDATA[Reply to LM ReCharge with a twist on Tue, 23 Feb 2016 02:44:48 GMT]]></title><description><![CDATA[<p dir="auto">that's bad a$$</p>
]]></description><link>https://multitool.ninja/post/1231340</link><guid isPermaLink="true">https://multitool.ninja/post/1231340</guid><dc:creator><![CDATA[stolnme1]]></dc:creator><pubDate>Tue, 23 Feb 2016 02:44:48 GMT</pubDate></item><item><title><![CDATA[Reply to LM ReCharge with a twist on Mon, 22 Feb 2016 20:22:37 GMT]]></title><description><![CDATA[<p dir="auto">Nice one, with superb finish!</p>
<p dir="auto">What is the method for oxidizing? By heating or something like that?</p>
]]></description><link>https://multitool.ninja/post/1231171</link><guid isPermaLink="true">https://multitool.ninja/post/1231171</guid><dc:creator><![CDATA[Psycopyro]]></dc:creator><pubDate>Mon, 22 Feb 2016 20:22:37 GMT</pubDate></item><item><title><![CDATA[Reply to LM ReCharge with a twist on Thu, 15 Jan 2015 08:25:58 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/bmot" aria-label="Profile: bmot">@<bdi>bmot</bdi></a> <a href="/post/967338">said</a>:<br />
<img src="/assets/uploads/smileys/drool.gif" alt=":drool:" title="drool" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/drool.gif" alt=":drool:" title="drool" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/drool.gif" alt=":drool:" title="drool" class="forum-smiley emoji" /></p>
<p dir="auto">Besides that, I do think you need to somehow make the clip more matching, too  <img src="/assets/uploads/smileys/poke2.gif" alt=":pok:" title="pok" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">Done!  :)</p>
<p dir="auto"><img src="http://i20.photobucket.com/albums/b241/babola/OxyReChargeClip1_zpsb31a5c7b.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Added another clip on my Acid Wave, too:<br />
<img src="http://i20.photobucket.com/albums/b241/babola/OxyReChargeClip2_zpsa3a2740f.jpg" alt="" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/1024656</link><guid isPermaLink="true">https://multitool.ninja/post/1024656</guid><dc:creator><![CDATA[babola]]></dc:creator><pubDate>Thu, 15 Jan 2015 08:25:58 GMT</pubDate></item><item><title><![CDATA[Reply to LM ReCharge with a twist on Sun, 02 Nov 2014 10:02:07 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/kkokkolis" aria-label="Profile: kkokkolis">@<bdi>kkokkolis</bdi></a> <a href="/post/973061">said</a>:<br />
They should choose the Surge arrangement for the next generation of Wave/Charge.</p>
</blockquote>
<p dir="auto">Yeah, while very logical something tells me they won't do that any time soon.  ::)</p>
<p dir="auto">LM however did something similar with the ST300 and the Rebar.  <img src="/assets/uploads/smileys/thinking.gif" alt=":think:" title="Thinking" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/973069</link><guid isPermaLink="true">https://multitool.ninja/post/973069</guid><dc:creator><![CDATA[babola]]></dc:creator><pubDate>Sun, 02 Nov 2014 10:02:07 GMT</pubDate></item><item><title><![CDATA[Reply to LM ReCharge with a twist on Sun, 02 Nov 2014 08:56:42 GMT]]></title><description><![CDATA[<p dir="auto">They should choose the Surge arrangement for the next generation of Wave/Charge. Outside beefy scissors, blade holder for T shank saws and an awl will complete that excellent series of tools. I don't mind the replaceable wire cutters but they count too for a lot of people. A new Charge TTi like this would be probably the best multitool in the world.</p>
]]></description><link>https://multitool.ninja/post/973061</link><guid isPermaLink="true">https://multitool.ninja/post/973061</guid><dc:creator><![CDATA[kkokkolis]]></dc:creator><pubDate>Sun, 02 Nov 2014 08:56:42 GMT</pubDate></item><item><title><![CDATA[Reply to LM ReCharge with a twist on Sun, 02 Nov 2014 08:00:58 GMT]]></title><description><![CDATA[<p dir="auto">Wow, impressive. Could go for that one too.</p>
<p dir="auto">My TTi has been used and abused, and the awl I had on doesn't look half as good as yours does. Don't know why Leatherman hasn't woken up and smelled the coffee yet. Charge owners want the awl too.</p>
<p dir="auto">Was so not impressed with Dave Canterbury's version, as he put the awl in the middle instead of the outside. He obviously did not do his homework or looked here in the forums. And here leatherman says they don't mod for anyone, ha!</p>
]]></description><link>https://multitool.ninja/post/973058</link><guid isPermaLink="true">https://multitool.ninja/post/973058</guid><dc:creator><![CDATA[Outback in Idaho]]></dc:creator><pubDate>Sun, 02 Nov 2014 08:00:58 GMT</pubDate></item><item><title><![CDATA[Reply to LM ReCharge with a twist on Sat, 01 Nov 2014 23:08:03 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/breezy12" aria-label="Profile: Breezy12">@<bdi>Breezy12</bdi></a> <a href="/post/972969">said</a>:<br />
thanks for the kind words. <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /> but I can't be held responsible for you catching the modding fever! ;)</p>
<p dir="auto">you know it's bad when you look for good deals on tools that you already have just so you can use them in mods. <img src="/assets/uploads/smileys/facepalm.gif" alt=":facepalm:" title="Facepalm" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">Oh yes, one can never own too many Rebars, for example  <img src="/assets/uploads/smileys/whistle.gif" alt=":whistle:" title="Whistle" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/972979</link><guid isPermaLink="true">https://multitool.ninja/post/972979</guid><dc:creator><![CDATA[babola]]></dc:creator><pubDate>Sat, 01 Nov 2014 23:08:03 GMT</pubDate></item><item><title><![CDATA[Reply to LM ReCharge with a twist on Sat, 01 Nov 2014 22:49:20 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/babola" aria-label="Profile: babola">@<bdi>babola</bdi></a> <a href="/post/972890">said</a>:</p>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/breezy12" aria-label="Profile: Breezy12">@<bdi>Breezy12</bdi></a> <a href="/post/972841">said</a>:</p>
<blockquote>
<p dir="auto">great comparison pics! <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /> and I <strong>really</strong> like the way your oxidized scales turned out... <img src="/assets/uploads/smileys/drool.gif" alt=":drool:" title="drool" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">Thanks man, your mods definitely add to my inspiration. Thinking about next one already.  <img src="/assets/uploads/smileys/multitool.gif" alt=":multi:" title="multi" class="forum-smiley emoji" /></p>
<p dir="auto">I happened to have a spare Wave...hmmm  8)</p>
</blockquote>
<p dir="auto">thanks for the kind words. <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /> but I can't be held responsible for you catching the modding fever! ;)</p>
<p dir="auto">you know it's bad when you look for good deals on tools that you already have just so you can use them in mods. <img src="/assets/uploads/smileys/facepalm.gif" alt=":facepalm:" title="Facepalm" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/972969</link><guid isPermaLink="true">https://multitool.ninja/post/972969</guid><dc:creator><![CDATA[Breezy12]]></dc:creator><pubDate>Sat, 01 Nov 2014 22:49:20 GMT</pubDate></item><item><title><![CDATA[Reply to LM ReCharge with a twist on Sat, 01 Nov 2014 19:57:36 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/breezy12" aria-label="Profile: Breezy12">@<bdi>Breezy12</bdi></a> <a href="/post/972841">said</a>:<br />
great comparison pics! <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /> and I <strong>really</strong> like the way your oxidized scales turned out... <img src="/assets/uploads/smileys/drool.gif" alt=":drool:" title="drool" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">Thanks man, your mods definitely add to my inspiration. Thinking about next one already.  <img src="/assets/uploads/smileys/multitool.gif" alt=":multi:" title="multi" class="forum-smiley emoji" /></p>
<p dir="auto">I happened to have a spare Wave...hmmm  8)</p>
]]></description><link>https://multitool.ninja/post/972890</link><guid isPermaLink="true">https://multitool.ninja/post/972890</guid><dc:creator><![CDATA[babola]]></dc:creator><pubDate>Sat, 01 Nov 2014 19:57:36 GMT</pubDate></item><item><title><![CDATA[Reply to LM ReCharge with a twist on Sat, 01 Nov 2014 18:31:12 GMT]]></title><description><![CDATA[<p dir="auto">great comparison pics! <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /> and I <strong>really</strong> like the way your oxidized scales turned out... <img src="/assets/uploads/smileys/drool.gif" alt=":drool:" title="drool" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/972841</link><guid isPermaLink="true">https://multitool.ninja/post/972841</guid><dc:creator><![CDATA[Breezy12]]></dc:creator><pubDate>Sat, 01 Nov 2014 18:31:12 GMT</pubDate></item><item><title><![CDATA[Reply to LM ReCharge with a twist on Sat, 01 Nov 2014 11:22:05 GMT]]></title><description><![CDATA[<p dir="auto">I know which one I want more.  :D</p>
]]></description><link>https://multitool.ninja/post/972723</link><guid isPermaLink="true">https://multitool.ninja/post/972723</guid><dc:creator><![CDATA[zoidberg]]></dc:creator><pubDate>Sat, 01 Nov 2014 11:22:05 GMT</pubDate></item><item><title><![CDATA[Reply to LM ReCharge with a twist on Sat, 01 Nov 2014 11:17:17 GMT]]></title><description><![CDATA[<p dir="auto">For comparison purposes I borrowed my colleague's original un-touched Charge TTi.<br />
The difference in gray color of the scales is definitely there and is even more evident in real life.</p>
<p dir="auto"><img src="https://farm8.staticflickr.com/7522/15494104538_069a8f5ae6_o_d.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="https://farm6.staticflickr.com/5604/15059553294_0b78e05f85_o_d.jpg" alt="" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/972720</link><guid isPermaLink="true">https://multitool.ninja/post/972720</guid><dc:creator><![CDATA[babola]]></dc:creator><pubDate>Sat, 01 Nov 2014 11:17:17 GMT</pubDate></item></channel></rss>