<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0"><channel><title><![CDATA[Mini Surge 2.0]]></title><description><![CDATA[<p dir="auto">I was originally going to wait until it was completely finished, but I couldn't resist sharing this one with you guys. :D</p>
<p dir="auto">Ever since Metro showed us the <a href="/topic/41159">Master &amp; Commander</a>, I've been wanting to try fitting a Blade Exchanger into a Wave/Charge. I knew it would be a challenge using only a Dremel and some hand files, but I figured it was worth a shot. ;)</p>
<p dir="auto">to start with, a public service announcement: be wary of buying tools on ebay listed as having "some light rust spots, but otherwise in great condition." <img src="/assets/uploads/smileys/facepalm.gif" alt=":facepalm:" title="Facepalm" class="forum-smiley emoji" /></p>
<p dir="auto"><img src="https://farm8.staticflickr.com/7390/16368798060_2c392107b8_h.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">a couple hours and plenty of elbow grease later, I had the donor Surge parts all cleaned up, especially the all-important Blade Exchanger. :)</p>
<p dir="auto">a few months later, I finally got around to starting on the mod. <img src="/assets/uploads/smileys/facepalm.gif" alt=":facepalm:" title="Facepalm" class="forum-smiley emoji" /> as with any Dremel/grinding work, slow &amp; steady is the key... and I'm happy with this one. :) I used a reinforced cutting wheel to carefully cut out the section needed for the BE, then used a carbide bit to run along the edges and smooth them out a little bit. after that was a hand file (the diamond file on another LM Wave, actually), and finally some fine grit sandpaper to finish it off. the result is a nice smooth line that has zero chance of cutting the user's hand. ;)</p>
<p dir="auto"><img src="https://farm8.staticflickr.com/7281/15936009153_eba1c38830_h.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="https://farm8.staticflickr.com/7417/16368737900_453d317101_h.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">I've been using a lot of Wingman scissors lately, so I decided to branch out and give the infamous 91mm Vic scissors a try on this one. <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
<p dir="auto"><img src="https://farm8.staticflickr.com/7281/16554512991_0669002c5e_h.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">however, I got a little Dremel-happy and ground off just a hair too much, so the lockup isn't quite as nice as I'd like it to be. :-\ I haven't decided if I'm going to switch to Wingman scissors or sacrifice another SAK.</p>
<p dir="auto"><img src="https://farm9.staticflickr.com/8665/16555088012_d91a5c5157_h.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">anyway, here's what it looks like at this point. I found some 3.25" jigsaw blades at Harbor Freight that fit into the Wave frame perfectly, so that adds some flexibility to the tool's loadout.</p>
<p dir="auto"><img src="https://farm8.staticflickr.com/7357/16555087772_53ae900010_h.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="https://farm9.staticflickr.com/8657/16554512761_d2ebce2dc6_h.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">and yes, I realize that the pivots don't match. I still need to trim the other Surge pivot, but I wanted to get the tool put together for the pics. I'm going to disassemble the whole thing and send the handles in for Cerakoting <s>to cover up the spots where the Dremel slipped</s> just for fun. :D I'm planning on a two-tone look, with black handles and SS tools.</p>
<p dir="auto">I'm also going to use this one as sort of a test platform. some ideas I want to try:</p>
<ul>
<li>
<p dir="auto">grinding the large flat driver into a chisel and/or light-duty pry bar</p>
</li>
<li>
<p dir="auto">replacing the can opener with a Vic combo tool</p>
</li>
<li>
<p dir="auto">replacing the large flat driver with the Wingman package opener (need to find the right spacer to go along with the package opener, since it's thinner than the flat driver)</p>
</li>
</ul>
<p dir="auto">I'll be sure to post an update with more pics once I get the handles cerakoted and make some more progress. in the meantime, feel free to add to my list of ideas to try. ;)</p>
]]></description><link>https://multitool.ninja/topic/57640/mini-surge-20</link><generator>RSS for Node</generator><lastBuildDate>Mon, 16 Nov 2026 07:09:07 GMT</lastBuildDate><atom:link href="https://multitool.ninja/topic/57640.rss" rel="self" type="application/rss+xml"/><pubDate>Tue, 17 Feb 2015 04:13:43 GMT</pubDate><ttl>60</ttl><item><title><![CDATA[Reply to Mini Surge 2.0 on Sat, 23 Sep 2017 09:51:07 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/breezy12" aria-label="Profile: Breezy12">@<bdi>Breezy12</bdi></a> <a href="/post/1557777">said</a>:<br />
it's good to be back! <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /> I posted in the NLC forum too with a little more info if you're curious/interested.</p>
<p dir="auto">I'm glad you found this thread useful... I am always happy to help whenever I can. <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
<p dir="auto">I need to go poke around the Mod Squad some more and see what other mods people have been up to... I seem to be catching another case of mod fever. :D</p>
</blockquote>
<p dir="auto"><img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1557985</link><guid isPermaLink="true">https://multitool.ninja/post/1557985</guid><dc:creator><![CDATA[Obi1shinobee]]></dc:creator><pubDate>Sat, 23 Sep 2017 09:51:07 GMT</pubDate></item><item><title><![CDATA[Reply to Mini Surge 2.0 on Fri, 22 Sep 2017 21:03:05 GMT]]></title><description><![CDATA[<p dir="auto">it's good to be back! <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /> I posted in the NLC forum too with a little more info if you're curious/interested.</p>
<p dir="auto">I'm glad you found this thread useful... I am always happy to help whenever I can. <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
<p dir="auto">I need to go poke around the Mod Squad some more and see what other mods people have been up to... I seem to be catching another case of mod fever. :D</p>
]]></description><link>https://multitool.ninja/post/1557777</link><guid isPermaLink="true">https://multitool.ninja/post/1557777</guid><dc:creator><![CDATA[Breezy12]]></dc:creator><pubDate>Fri, 22 Sep 2017 21:03:05 GMT</pubDate></item><item><title><![CDATA[Reply to Mini Surge 2.0 on Fri, 22 Sep 2017 20:02:07 GMT]]></title><description><![CDATA[<p dir="auto">Hey bud.  Thanks to you I was able to make it finally happen.  This thread helped me so much and for that I am thankful to you.  Hope all is well and its great to hear from you   <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1557759</link><guid isPermaLink="true">https://multitool.ninja/post/1557759</guid><dc:creator><![CDATA[Aloha]]></dc:creator><pubDate>Fri, 22 Sep 2017 20:02:07 GMT</pubDate></item><item><title><![CDATA[Reply to Mini Surge 2.0 on Fri, 22 Sep 2017 18:13:26 GMT]]></title><description><![CDATA[<p dir="auto"><img src="/assets/uploads/smileys/like-sign.gif" alt=":like:" title="I like this" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1557719</link><guid isPermaLink="true">https://multitool.ninja/post/1557719</guid><dc:creator><![CDATA[SteveC]]></dc:creator><pubDate>Fri, 22 Sep 2017 18:13:26 GMT</pubDate></item><item><title><![CDATA[Reply to Mini Surge 2.0 on Fri, 22 Sep 2017 17:48:25 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/aloha" aria-label="Profile: Aloha007">@<bdi>Aloha007</bdi></a> <a href="/post/1369140">said</a>:<br />
Breezy, whats up buddy?  I know this thread is old but just wanted to stop by to say, I finally did it!!!</p>
<p dir="auto">Thanks to this thread I installed a BE on my Wave.  I've not encountered the opening issues thankfully and hopefully you resolved yours.  Miss ya bud.</p>
</blockquote>
<p dir="auto">thanks Aloha!! looks like you did a fantastic job putting that BE into your Wave. <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /></p>
<p dir="auto">the opening issues I was dealing with sort of worked themselves out... just needed to break it in a bit, I guess. <img src="/assets/uploads/smileys/thinking.gif" alt=":think:" title="Thinking" class="forum-smiley emoji" /></p>
<p dir="auto">I also tried replacing the original BE with a BE from the newer model Surge... that one did not fit as well, and stuck up above the handle too much for my taste. I can try to get some pictures later. I suppose I could try reworking the handle a bit, but at the time, it was much easier to just put the original BE back in place. :D</p>
]]></description><link>https://multitool.ninja/post/1557680</link><guid isPermaLink="true">https://multitool.ninja/post/1557680</guid><dc:creator><![CDATA[Breezy12]]></dc:creator><pubDate>Fri, 22 Sep 2017 17:48:25 GMT</pubDate></item><item><title><![CDATA[Reply to Mini Surge 2.0 on Fri, 28 Oct 2016 23:36:19 GMT]]></title><description><![CDATA[<p dir="auto">Breezy also links to Metros Charge blade exchanger mod.  His is high quality as are all his mods.</p>
]]></description><link>https://multitool.ninja/post/1369343</link><guid isPermaLink="true">https://multitool.ninja/post/1369343</guid><dc:creator><![CDATA[Aloha]]></dc:creator><pubDate>Fri, 28 Oct 2016 23:36:19 GMT</pubDate></item><item><title><![CDATA[Reply to Mini Surge 2.0 on Fri, 28 Oct 2016 21:39:54 GMT]]></title><description><![CDATA[<p dir="auto">Thanks for necro Aloha <img src="/assets/uploads/smileys/like-sign.gif" alt=":like:" title="I like this" class="forum-smiley emoji" /> I shall give this a good read later tonight <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1369317</link><guid isPermaLink="true">https://multitool.ninja/post/1369317</guid><dc:creator><![CDATA[Poncho65]]></dc:creator><pubDate>Fri, 28 Oct 2016 21:39:54 GMT</pubDate></item><item><title><![CDATA[Reply to Mini Surge 2.0 on Fri, 28 Oct 2016 16:27:20 GMT]]></title><description><![CDATA[<p dir="auto">Breezy, whats up buddy?  I know this thread is old but just wanted to stop by to say, I finally did it!!!</p>
<p dir="auto">Thanks to this thread I installed a BE on my Wave.  I've not encountered the opening issues thankfully and hopefully you resolved yours.  Miss ya bud.</p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/291229_IMG_1736%20copy.jpg" alt="IMG_1736 copy.jpg" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/1369140</link><guid isPermaLink="true">https://multitool.ninja/post/1369140</guid><dc:creator><![CDATA[Aloha]]></dc:creator><pubDate>Fri, 28 Oct 2016 16:27:20 GMT</pubDate></item><item><title><![CDATA[Reply to Mini Surge 2.0 on Thu, 30 Apr 2015 15:39:36 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/breezy12" aria-label="Profile: Breezy12">@<bdi>Breezy12</bdi></a> <a href="/post/1080861">said</a>:</p>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/aloha" aria-label="Profile: Aloha007">@<bdi>Aloha007</bdi></a> <a href="/post/1080561">said</a>:</p>
<blockquote>
<p dir="auto">BUMP</p>
<p dir="auto">Breezy how are you coming along with the BE on the Wave?  I scored a Surge that I'd love to take the BE off and try with my polished Wave.</p>
</blockquote>
<p dir="auto">sadly, I am not coming along with it at all. <img src="/assets/uploads/smileys/facepalm.gif" alt=":facepalm:" title="Facepalm" class="forum-smiley emoji" /></p>
<p dir="auto">work/real life have been busier than usual lately, but I am taking a couple days off next week, so I should be able to find some time to (hopefully) catch up on my mods. ;) I'll keep you posted!</p>
<p dir="auto"><strong>FYI - I also recently scored a new model Surge at a good price, so I plan on taking the updated BE from that one and comparing the two to see how each of them fits in the Wave.</strong> <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">The plot thickens.</p>
<p dir="auto">I look forward to your findings.  Hope you get some modding time in and not just for us to enjoy but for yourself.</p>
]]></description><link>https://multitool.ninja/post/1081071</link><guid isPermaLink="true">https://multitool.ninja/post/1081071</guid><dc:creator><![CDATA[Aloha]]></dc:creator><pubDate>Thu, 30 Apr 2015 15:39:36 GMT</pubDate></item><item><title><![CDATA[Reply to Mini Surge 2.0 on Thu, 30 Apr 2015 15:35:17 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/breezy12" aria-label="Profile: Breezy12">@<bdi>Breezy12</bdi></a> <a href="/post/1080861">said</a>:</p>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/aloha" aria-label="Profile: Aloha007">@<bdi>Aloha007</bdi></a> <a href="/post/1080561">said</a>:</p>
<blockquote>
<p dir="auto">BUMP</p>
<p dir="auto">Breezy how are you coming along with the BE on the Wave?  I scored a Surge that I'd love to take the BE off and try with my polished Wave.</p>
</blockquote>
<p dir="auto">sadly, I am not coming along with it at all. <img src="/assets/uploads/smileys/facepalm.gif" alt=":facepalm:" title="Facepalm" class="forum-smiley emoji" /></p>
<p dir="auto">work/real life have been busier than usual lately, but I am taking a couple days off next week, so I should be able to find some time to (hopefully) catch up on my mods. ;) I'll keep you posted!</p>
<p dir="auto">FYI - I also recently scored a new model Surge at a good price, so I plan on taking the updated BE from that one and comparing the two to see how each of them fits in the Wave. <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">I was wondering where you had gone off to.</p>
]]></description><link>https://multitool.ninja/post/1081065</link><guid isPermaLink="true">https://multitool.ninja/post/1081065</guid><dc:creator><![CDATA[HarleyXJGuy]]></dc:creator><pubDate>Thu, 30 Apr 2015 15:35:17 GMT</pubDate></item><item><title><![CDATA[Reply to Mini Surge 2.0 on Thu, 30 Apr 2015 07:13:18 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/aloha" aria-label="Profile: Aloha007">@<bdi>Aloha007</bdi></a> <a href="/post/1080561">said</a>:<br />
BUMP</p>
<p dir="auto">Breezy how are you coming along with the BE on the Wave?  I scored a Surge that I'd love to take the BE off and try with my polished Wave.</p>
</blockquote>
<p dir="auto">sadly, I am not coming along with it at all. <img src="/assets/uploads/smileys/facepalm.gif" alt=":facepalm:" title="Facepalm" class="forum-smiley emoji" /></p>
<p dir="auto">work/real life have been busier than usual lately, but I am taking a couple days off next week, so I should be able to find some time to (hopefully) catch up on my mods. ;) I'll keep you posted!</p>
<p dir="auto">FYI - I also recently scored a new model Surge at a good price, so I plan on taking the updated BE from that one and comparing the two to see how each of them fits in the Wave. <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1080861</link><guid isPermaLink="true">https://multitool.ninja/post/1080861</guid><dc:creator><![CDATA[Breezy12]]></dc:creator><pubDate>Thu, 30 Apr 2015 07:13:18 GMT</pubDate></item><item><title><![CDATA[Reply to Mini Surge 2.0 on Thu, 30 Apr 2015 00:29:09 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/danmandiel" aria-label="Profile: dan.mandiel">@<bdi>dan.mandiel</bdi></a> <a href="/post/1045198">said</a>:<br />
Maybe try to intergrate a mini flashlight? <img src="/assets/uploads/smileys/whistle.gif" alt=":whistle:" title="Whistle" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/whistle.gif" alt=":whistle:" title="Whistle" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">How about putting a fauxton on a split ring ?</p>
]]></description><link>https://multitool.ninja/post/1080782</link><guid isPermaLink="true">https://multitool.ninja/post/1080782</guid><dc:creator><![CDATA[gregozedobe]]></dc:creator><pubDate>Thu, 30 Apr 2015 00:29:09 GMT</pubDate></item><item><title><![CDATA[Reply to Mini Surge 2.0 on Wed, 29 Apr 2015 16:17:16 GMT]]></title><description><![CDATA[<p dir="auto">BUMP</p>
<p dir="auto">Breezy how are you coming along with the BE on the Wave?  I scored a Surge that I'd love to take the BE off and try with my polished Wave.</p>
]]></description><link>https://multitool.ninja/post/1080561</link><guid isPermaLink="true">https://multitool.ninja/post/1080561</guid><dc:creator><![CDATA[Aloha]]></dc:creator><pubDate>Wed, 29 Apr 2015 16:17:16 GMT</pubDate></item><item><title><![CDATA[Reply to Mini Surge 2.0 on Thu, 26 Feb 2015 09:25:42 GMT]]></title><description><![CDATA[<p dir="auto">Maybe try to intergrate a mini flashlight? <img src="/assets/uploads/smileys/whistle.gif" alt=":whistle:" title="Whistle" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/whistle.gif" alt=":whistle:" title="Whistle" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1045198</link><guid isPermaLink="true">https://multitool.ninja/post/1045198</guid><dc:creator><![CDATA[dan.mandiel]]></dc:creator><pubDate>Thu, 26 Feb 2015 09:25:42 GMT</pubDate></item><item><title><![CDATA[Reply to Mini Surge 2.0 on Thu, 26 Feb 2015 03:07:07 GMT]]></title><description><![CDATA[<p dir="auto">Way to go Breezy!!!!!!!</p>
]]></description><link>https://multitool.ninja/post/1045113</link><guid isPermaLink="true">https://multitool.ninja/post/1045113</guid><dc:creator><![CDATA[Metropolicity]]></dc:creator><pubDate>Thu, 26 Feb 2015 03:07:07 GMT</pubDate></item><item><title><![CDATA[Reply to Mini Surge 2.0 on Wed, 25 Feb 2015 17:40:44 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/breezy12" aria-label="Profile: Breezy12">@<bdi>Breezy12</bdi></a> <a href="/post/1041222">said</a>:<br />
I was originally going to wait until it was completely finished, but I couldn't resist sharing this one with you guys. :D</p>
<p dir="auto">Ever since Metro showed us the <a href="/topic/41159">Master &amp; Commander</a>, I've been wanting to try fitting a Blade Exchanger into a Wave/Charge. I knew it would be a challenge using only a Dremel and some hand files, but I figured it was worth a shot. ;)</p>
<p dir="auto">to start with, a public service announcement: be wary of buying tools on ebay listed as having "some light rust spots, but otherwise in great condition." <img src="/assets/uploads/smileys/facepalm.gif" alt=":facepalm:" title="Facepalm" class="forum-smiley emoji" /></p>
<p dir="auto"><img src="https://farm8.staticflickr.com/7390/16368798060_2c392107b8_h.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">a couple hours and plenty of elbow grease later, I had the donor Surge parts all cleaned up, especially the all-important Blade Exchanger. :)</p>
<p dir="auto">a few months later, I finally got around to starting on the mod. <img src="/assets/uploads/smileys/facepalm.gif" alt=":facepalm:" title="Facepalm" class="forum-smiley emoji" /> as with any Dremel/grinding work, slow &amp; steady is the key... and I'm happy with this one. :) I used a reinforced cutting wheel to carefully cut out the section needed for the BE, then used a carbide bit to run along the edges and smooth them out a little bit. after that was a hand file (the diamond file on another LM Wave, actually), and finally some fine grit sandpaper to finish it off. the result is a nice smooth line that has zero chance of cutting the user's hand. ;)</p>
<p dir="auto"><img src="https://farm8.staticflickr.com/7281/15936009153_eba1c38830_h.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="https://farm8.staticflickr.com/7417/16368737900_453d317101_h.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">I've been using a lot of Wingman scissors lately, so I decided to branch out and give the infamous 91mm Vic scissors a try on this one. <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
<p dir="auto"><img src="https://farm8.staticflickr.com/7281/16554512991_0669002c5e_h.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">however, I got a little Dremel-happy and ground off just a hair too much, so the lockup isn't quite as nice as I'd like it to be. :-\ I haven't decided if I'm going to switch to Wingman scissors or sacrifice another SAK.</p>
<p dir="auto"><img src="https://farm9.staticflickr.com/8665/16555088012_d91a5c5157_h.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">anyway, here's what it looks like at this point. I found some 3.25" jigsaw blades at Harbor Freight that fit into the Wave frame perfectly, so that adds some flexibility to the tool's loadout.</p>
<p dir="auto"><img src="https://farm8.staticflickr.com/7357/16555087772_53ae900010_h.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="https://farm9.staticflickr.com/8657/16554512761_d2ebce2dc6_h.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">and yes, I realize that the pivots don't match. I still need to trim the other Surge pivot, but I wanted to get the tool put together for the pics. I'm going to disassemble the whole thing and send the handles in for Cerakoting <s>to cover up the spots where the Dremel slipped</s> just for fun. :D I'm planning on a two-tone look, with black handles and SS tools.</p>
<p dir="auto">I'm also going to use this one as sort of a test platform. some ideas I want to try:</p>
</blockquote>
<blockquote>
<ul>
<li>grinding the large flat driver into a chisel and/or light-duty pry bar</li>
</ul>
</blockquote>
<blockquote>
<ul>
<li>replacing the can opener with a Vic combo tool</li>
</ul>
</blockquote>
<blockquote>
<ul>
<li>replacing the large flat driver with the Wingman package opener (need to find the right spacer to go along with the package opener, since it's thinner than the flat driver)</li>
</ul>
</blockquote>
<blockquote></blockquote>
<blockquote>
<p dir="auto">I'll be sure to post an update with more pics once I get the handles cerakoted and make some more progress. in the meantime, feel free to add to my list of ideas to try. ;)</p>
</blockquote>
<p dir="auto">HOLY SMOKE !!!  <img src="/assets/uploads/smileys/multitool.gif" alt=":multi:" title="multi" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1044859</link><guid isPermaLink="true">https://multitool.ninja/post/1044859</guid><dc:creator><![CDATA[Obi1shinobee]]></dc:creator><pubDate>Wed, 25 Feb 2015 17:40:44 GMT</pubDate></item><item><title><![CDATA[Reply to Mini Surge 2.0 on Sat, 21 Feb 2015 23:15:09 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/breezy12" aria-label="Profile: Breezy12">@<bdi>Breezy12</bdi></a> <a href="/post/1043032">said</a>:</p>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/aloha" aria-label="Profile: Aloha007">@<bdi>Aloha007</bdi></a> <a href="/post/1042644">said</a>:</p>
<blockquote>
<p dir="auto">I spent the better part of last night looking at Metros Wave mod with BE.  I'm glad I stumbled upon this so I can see how this progresses.</p>
<p dir="auto">I'm still a bit confused if any grinding of the BE is needed for it to fit or if its just the Surge pivot that's needed or both  <img src="/assets/uploads/smileys/thinking.gif" alt=":think:" title="Thinking" class="forum-smiley emoji" />.</p>
</blockquote>
<p dir="auto">if I remember correctly, Metro thinned out his BE because he was originally installing it in a Charge. (He also thinned out the titanium handle scale.)</p>
<p dir="auto">I have not thinned my BE at all, partly because I'm not going to attempt this with a Charge, and also because it would be extremely difficult to evenly thin the BE using a Dremel, which is what I have to work with. ;) The Surge pivot is definitely needed though.</p>
<p dir="auto">that being said, I still need to figure something out, because there's a lot of tension/friction on the BE and it's difficult to open. it's still perfectly usable, but I want it to open/close as smoothly as the other tools. :)</p>
</blockquote>
<p dir="auto">I'm pretty sure he didn't thin out the BE.</p>
<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/metropolicity" aria-label="Profile: Metropolicity">@<bdi>Metropolicity</bdi></a> <a href="/post/657045">said</a>:<br />
<strong>Blade Exchanger</strong></p>
<p dir="auto"><strong>Yes!</strong> You read right, a blade exchanger (BE). I've always said it couldn't be done, but somehow I did it. Taking the blade exchanger from a Surge, the small part was carefully shaped and the locking surface mated with the smaller liner lock.</p>
<p dir="auto">This was the easy part. The BE is quite thick and needs room to move and separate to replace the blades. This was a challenge, but thanks to the thick Ti scales, material could be removed to make room for it. A whole 1mm was milled off, and a little lip was left to make sure the scale properly when buttoned up.</p>
</blockquote>
]]></description><link>https://multitool.ninja/post/1043232</link><guid isPermaLink="true">https://multitool.ninja/post/1043232</guid><dc:creator><![CDATA[zoidberg]]></dc:creator><pubDate>Sat, 21 Feb 2015 23:15:09 GMT</pubDate></item><item><title><![CDATA[Reply to Mini Surge 2.0 on Sat, 21 Feb 2015 17:49:44 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/aloha" aria-label="Profile: Aloha007">@<bdi>Aloha007</bdi></a> <a href="/post/1042644">said</a>:<br />
I spent the better part of last night looking at Metros Wave mod with BE.  I'm glad I stumbled upon this so I can see how this progresses.</p>
<p dir="auto">I'm still a bit confused if any grinding of the BE is needed for it to fit or if its just the Surge pivot that's needed or both  <img src="/assets/uploads/smileys/thinking.gif" alt=":think:" title="Thinking" class="forum-smiley emoji" />.</p>
</blockquote>
<p dir="auto">if I remember correctly, Metro thinned out his BE because he was originally installing it in a Charge. (He also thinned out the titanium handle scale.)</p>
<p dir="auto">I have not thinned my BE at all, partly because I'm not going to attempt this with a Charge, and also because it would be extremely difficult to evenly thin the BE using a Dremel, which is what I have to work with. ;) The Surge pivot is definitely needed though.</p>
<p dir="auto">that being said, I still need to figure something out, because there's a lot of tension/friction on the BE and it's difficult to open. it's still perfectly usable, but I want it to open/close as smoothly as the other tools. :)</p>
]]></description><link>https://multitool.ninja/post/1043032</link><guid isPermaLink="true">https://multitool.ninja/post/1043032</guid><dc:creator><![CDATA[Breezy12]]></dc:creator><pubDate>Sat, 21 Feb 2015 17:49:44 GMT</pubDate></item><item><title><![CDATA[Reply to Mini Surge 2.0 on Fri, 20 Feb 2015 16:29:36 GMT]]></title><description><![CDATA[<p dir="auto">I spent the better part of last night looking at Metros Wave mod with BE.  I'm glad I stumbled upon this so I can see how this progresses.</p>
<p dir="auto">I'm still a bit confused if any grinding of the BE is needed for it to fit or if its just the Surge pivot that's needed or both  <img src="/assets/uploads/smileys/thinking.gif" alt=":think:" title="Thinking" class="forum-smiley emoji" />.</p>
]]></description><link>https://multitool.ninja/post/1042644</link><guid isPermaLink="true">https://multitool.ninja/post/1042644</guid><dc:creator><![CDATA[Aloha]]></dc:creator><pubDate>Fri, 20 Feb 2015 16:29:36 GMT</pubDate></item><item><title><![CDATA[Reply to Mini Surge 2.0 on Fri, 20 Feb 2015 15:02:15 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/breezy12" aria-label="Profile: Breezy12">@<bdi>Breezy12</bdi></a> <a href="/post/1042331">said</a>:<br />
nope, that's not bad at all for a Surge. maybe I should actually look for the ebay listing next time. :D</p>
</blockquote>
<p dir="auto">Meh. The one package that actually got lost while I was here was my OC Pioneer I got off of Ebay.</p>
<p dir="auto">Of course I can not really say it was the seller since we are in the back woods of Afghanistan. Just glad it was not very expensive.</p>
]]></description><link>https://multitool.ninja/post/1042624</link><guid isPermaLink="true">https://multitool.ninja/post/1042624</guid><dc:creator><![CDATA[HarleyXJGuy]]></dc:creator><pubDate>Fri, 20 Feb 2015 15:02:15 GMT</pubDate></item><item><title><![CDATA[Reply to Mini Surge 2.0 on Thu, 19 Feb 2015 18:08:46 GMT]]></title><description><![CDATA[<p dir="auto">nope, that's not bad at all for a Surge. maybe I should actually look for the ebay listing next time. :D</p>
]]></description><link>https://multitool.ninja/post/1042331</link><guid isPermaLink="true">https://multitool.ninja/post/1042331</guid><dc:creator><![CDATA[Breezy12]]></dc:creator><pubDate>Thu, 19 Feb 2015 18:08:46 GMT</pubDate></item><item><title><![CDATA[Reply to Mini Surge 2.0 on Thu, 19 Feb 2015 08:26:36 GMT]]></title><description><![CDATA[<p dir="auto">50 bucks ain't bad at all, if I was not saving for a caper top for my truck I might be all over it.</p>
]]></description><link>https://multitool.ninja/post/1042200</link><guid isPermaLink="true">https://multitool.ninja/post/1042200</guid><dc:creator><![CDATA[HarleyXJGuy]]></dc:creator><pubDate>Thu, 19 Feb 2015 08:26:36 GMT</pubDate></item><item><title><![CDATA[Reply to Mini Surge 2.0 on Thu, 19 Feb 2015 07:30:22 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/breezy12" aria-label="Profile: Breezy12">@<bdi>Breezy12</bdi></a> <a href="/post/1042016">said</a>:</p>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/danmandiel" aria-label="Profile: dan.mandiel">@<bdi>dan.mandiel</bdi></a> <a href="/post/1041747">said</a>:</p>
<blockquote></blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/harleyxjguy" aria-label="Profile: HarleyXJGuy">@<bdi>HarleyXJGuy</bdi></a> <a href="/post/1041734">said</a>:</p>
<blockquote>
<blockquote></blockquote>
</blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/breezy12" aria-label="Profile: Breezy12">@<bdi>Breezy12</bdi></a> <a href="/post/1041499">said</a>:</p>
<blockquote>
<blockquote>
<blockquote>
<p dir="auto">Surges are much harder to come by...</p>
</blockquote>
<p dir="auto">Tell me about it.  <img src="/assets/uploads/smileys/rant.gif" alt=":rant:" title="rant!" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">there's actually a BO used new version surge now on ebay<img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">maybe I should have been more specific... Surges are much harder to come by <em>at a decent price</em>... especially if the Surge is just going to be used for mod fodder. :-\</p>
</blockquote>
<p dir="auto">I would happily pay 50 dollas for that surge but my dad won't let me[emoji38]<br />
50 dollars is not that much..</p>
<p dir="auto">Sent from my iPhone using Tapatalk</p>
]]></description><link>https://multitool.ninja/post/1042189</link><guid isPermaLink="true">https://multitool.ninja/post/1042189</guid><dc:creator><![CDATA[dan.mandiel]]></dc:creator><pubDate>Thu, 19 Feb 2015 07:30:22 GMT</pubDate></item><item><title><![CDATA[Reply to Mini Surge 2.0 on Wed, 18 Feb 2015 20:45:33 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/danmandiel" aria-label="Profile: dan.mandiel">@<bdi>dan.mandiel</bdi></a> <a href="/post/1041747">said</a>:</p>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/harleyxjguy" aria-label="Profile: HarleyXJGuy">@<bdi>HarleyXJGuy</bdi></a> <a href="/post/1041734">said</a>:</p>
<blockquote></blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/breezy12" aria-label="Profile: Breezy12">@<bdi>Breezy12</bdi></a> <a href="/post/1041499">said</a>:</p>
<blockquote>
<blockquote>
<p dir="auto">Surges are much harder to come by...</p>
</blockquote>
<p dir="auto">Tell me about it.  <img src="/assets/uploads/smileys/rant.gif" alt=":rant:" title="rant!" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">there's actually a BO used new version surge now on ebay<img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">maybe I should have been more specific... Surges are much harder to come by <em>at a decent price</em>... especially if the Surge is just going to be used for mod fodder. :-\</p>
]]></description><link>https://multitool.ninja/post/1042016</link><guid isPermaLink="true">https://multitool.ninja/post/1042016</guid><dc:creator><![CDATA[Breezy12]]></dc:creator><pubDate>Wed, 18 Feb 2015 20:45:33 GMT</pubDate></item></channel></rss>