<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0"><channel><title><![CDATA[Böker City Tool 3 - thoughts after 3 weeks of use]]></title><description><![CDATA[<p dir="auto">The City Tool 3 shines in some categories, struggles in others and fails in some, still this is probably the best off-brand MT I have ever held/used.<br />
For more detailed info and pictures see my <a href="/topic/62284">Off-Brand-Challenge Thread</a></p>
<p dir="auto"><strong>The Fails:</strong><br />
For me the fails are the <strong>key-ring</strong> and the <strong>serrated blade</strong>.<br />
The <strong>key-ring</strong> generates an uncomfortable hot spot when holding the knife. My suggestion, integrate it with the clip, or make it screw on instead of the clip.<br />
The <strong>serrated blade</strong> is a poor screwdriver (AND was damaged too easily) and not particularly sharp, unsurprising as its cross-section immediately shows.<br />
I like that they did not just add a can-opener, but seriously those two tools are a waste of space, my suggestion add a thin nail-fail and a awl (or either). As a fact, if they do that I'm going to buy another one.</p>
<p dir="auto"><strong>The Struggles:</strong><br />
Obviously, that has to be the <strong>scissors</strong>. They utterly disappoint when it comes to soft / light / thin materials. I do hope they work on that a bit.<br />
But those scissors are really good at cutting heavier stuff like zip-ties / clam-shell packaging and even tin-cans. In that range I prefer them over Micra / Cross-Cut scissors thanks to their superior maneuverability (seriously, they are really good at that).<br />
My suggestion: work a bit on the scissors, so they cut thin materials. Double the scissor-lever up for more comfort when using. With those adjustments this would be a true winner.<br />
The <strong>screws</strong> are sticking out of the scales, nothing you would notice when using, but when fiddling in the pockets I found it annoying (like a sharp point on a tooth and you can't stop yourself pocking it with your tongue).</p>
<p dir="auto"><strong>The Wins:</strong><br />
Overall, I got the impression the City Tool is very <strong>sturdy</strong>.<br />
Those **scales **are also very **comfortable **to grip, seem **durable **(3 weeks in my pockets with my keys and whenever my hand was idle I scratched the keys against the scales). I think the overall design adds to the comfortable grip.</p>
<p dir="auto"><strong>The DOMINATION:</strong><br />
I found the <strong>BLADE</strong> to be perfectly shaped and designed. A blade is more than fancy steel and so, to me this is the single best MT blade, despite not being locking and not being OHO.<br />
Yes, I have ordered the City Tool 1 :D</p>
<p dir="auto"><strong>Conclusion:</strong><br />
Böker has delivered a good tool and a good starting point for a new pocket-tool-line. Being about twice as expensive as a equivalent Victorinox I feel the City Tools are too expensive. Overall, the Climber is the better tool at lower cost. I'm not disappointed in the City Tool, it is a good tool, feels good in my hands and looks good!</p>
<p dir="auto">If Böker builds up on this frame and works on its weakness this could be a great alternative to the Victorinox offerings. For me, that would primarily mean replacing the serrated blade / key-ring with something useful (I really detest those two implements).</p>
]]></description><link>https://multitool.ninja/topic/62732/bker-city-tool-3-thoughts-after-3-weeks-of-use</link><generator>RSS for Node</generator><lastBuildDate>Wed, 18 Nov 2026 00:28:41 GMT</lastBuildDate><atom:link href="https://multitool.ninja/topic/62732.rss" rel="self" type="application/rss+xml"/><pubDate>Sun, 25 Oct 2015 18:33:57 GMT</pubDate><ttl>60</ttl><item><title><![CDATA[Reply to Böker City Tool 3 - thoughts after 3 weeks of use on Tue, 27 Oct 2015 22:13:02 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/etherealicer" aria-label="Profile: Etherealicer">@<bdi>Etherealicer</bdi></a> <a href="/post/1172991">said</a>:</p>
<p dir="auto">@50ft-trad <a href="/post/1172985">said</a>:</p>
<blockquote>
<p dir="auto">Scissors are easy to get right, but time consuming. It's not a difficult process to adjust a peened pivot or crink and sharpen to get a good cutting action when you understand the mechanics (I've done it on dedicated scissors a few times), but from a mass production perspective, it must be a smurfing nightmare! It must be easier to get every other tool on a multitool or multipurpose knife right than it is with scissors on a mass production basis. All credit to those that get it right.</p>
</blockquote>
<p dir="auto">Does that mean if I send you one you would adjust the scissors for me and send it back :D</p>
<p dir="auto"><img src="/assets/uploads/smileys/gimme.gif" alt=":gimme:" title="gimme" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">I could certainly have a try for you....</p>
]]></description><link>https://multitool.ninja/post/1172992</link><guid isPermaLink="true">https://multitool.ninja/post/1172992</guid><dc:creator><![CDATA[AimlessWanderer]]></dc:creator><pubDate>Tue, 27 Oct 2015 22:13:02 GMT</pubDate></item><item><title><![CDATA[Reply to Böker City Tool 3 - thoughts after 3 weeks of use on Tue, 27 Oct 2015 22:10:36 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto">@50ft-trad <a href="/post/1172985">said</a>:<br />
Scissors are easy to get right, but time consuming. It's not a difficult process to adjust a peened pivot or crink and sharpen to get a good cutting action when you understand the mechanics (I've done it on dedicated scissors a few times), but from a mass production perspective, it must be a smurfing nightmare! It must be easier to get every other tool on a multitool or multipurpose knife right than it is with scissors on a mass production basis. All credit to those that get it right.</p>
</blockquote>
<p dir="auto">Does that mean if I send you one you would adjust the scissors for me and send it back :D</p>
<p dir="auto"><img src="/assets/uploads/smileys/gimme.gif" alt=":gimme:" title="gimme" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1172991</link><guid isPermaLink="true">https://multitool.ninja/post/1172991</guid><dc:creator><![CDATA[Etherealicer]]></dc:creator><pubDate>Tue, 27 Oct 2015 22:10:36 GMT</pubDate></item><item><title><![CDATA[Reply to Böker City Tool 3 - thoughts after 3 weeks of use on Tue, 27 Oct 2015 22:01:19 GMT]]></title><description><![CDATA[<p dir="auto">Scissors are easy to get right, but time consuming. It's not a difficult process to adjust a peened pivot or crink and sharpen to get a good cutting action when you understand the mechanics (I've done it on dedicated scissors a few times), but from a mass production perspective, it must be a smurfing nightmare! It must be easier to get every other tool on a multitool or multipurpose knife right than it is with scissors on a mass production basis. All credit to those that get it right.</p>
]]></description><link>https://multitool.ninja/post/1172985</link><guid isPermaLink="true">https://multitool.ninja/post/1172985</guid><dc:creator><![CDATA[AimlessWanderer]]></dc:creator><pubDate>Tue, 27 Oct 2015 22:01:19 GMT</pubDate></item><item><title><![CDATA[Reply to Böker City Tool 3 - thoughts after 3 weeks of use on Tue, 27 Oct 2015 21:56:05 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/corwyn" aria-label="Profile: Corwyn">@<bdi>Corwyn</bdi></a> <a href="/post/1172642">said</a>:<br />
Am I hypocritical for being more interested in this knife since it's called Sanrenmu than when it was Boker?...  <img src="/assets/uploads/smileys/whistle.gif" alt=":whistle:" title="Whistle" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">Possibly,but your not alone  <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1172980</link><guid isPermaLink="true">https://multitool.ninja/post/1172980</guid><dc:creator><![CDATA[kirk13]]></dc:creator><pubDate>Tue, 27 Oct 2015 21:56:05 GMT</pubDate></item><item><title><![CDATA[Reply to Böker City Tool 3 - thoughts after 3 weeks of use on Tue, 27 Oct 2015 21:52:14 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto">@50ft-trad <a href="/post/1172684">said</a>:<br />
There's a parcel on the way to you today mate  ;)</p>
<p dir="auto">I'm still very much in mixed minds about this tool. At first I thought the odd serrated blade and driver combo could be quite useful, but now I'm not so sure. I love the shape of the blade, and the overall look of the knife and clip, though I wish that glass breaker was easily removed. Cap lifter and awl look perfectly fine, as does the corkscrew - shame about the lanyard loop screwing up the ergonomics. The scissors sound fixable for lighter work, but am unconvinced overall that the price is worth the money (to me) with the various little niggles.</p>
<p dir="auto">The absence of a Phillips is no biggie for me, as I'd just ensure that whatever pliers tool I paired it up with covered that. The looks of the city version do appeal I must admit. I suspect I'll end up trying one at some point, but it's not tempting me enough to get one with any urgency....</p>
</blockquote>
<p dir="auto">I too am very intrigued by the knife. I love the look of it and that it's something fresh in the multitool knife arena, but I am not digging Chinese craftsmanship. Looks like there's a couple of week points and shoddy scissors. If they made them better quality or the reviews improve it could be a winner.</p>
<p dir="auto">But obviously they ripped off a couple Victorinox tools like the saw and cap lifter 100%. Why not just copy the scissors too?  :)  I guess it's nice to see some decent innovation in this market though. I really like the idea of the number 2 with a decen serrated blade plus driver.</p>
]]></description><link>https://multitool.ninja/post/1172977</link><guid isPermaLink="true">https://multitool.ninja/post/1172977</guid><dc:creator><![CDATA[BerkshireHunter]]></dc:creator><pubDate>Tue, 27 Oct 2015 21:52:14 GMT</pubDate></item><item><title><![CDATA[Reply to Böker City Tool 3 - thoughts after 3 weeks of use on Tue, 27 Oct 2015 13:34:33 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/etherealicer" aria-label="Profile: Etherealicer">@<bdi>Etherealicer</bdi></a> <a href="/post/1172457">said</a>:</p>
<p dir="auto">@50ft-trad <a href="/post/1172448">said</a>:</p>
<blockquote>
<p dir="auto">Sounds like it does need some work to get the best from it, with tweaking the scissors and ergonomics. With that in mind, I might as well just overhaul a Juice to get that running smooth, at least that way I get pliers and a proper Phillips  :D Excellent concept, shame the execution isn't quite up to par</p>
<p dir="auto">Many thanks for the insight  <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">I have no inside on the Juice (yet <img src="/assets/uploads/smileys/poke2.gif" alt=":pok:" title="pok" class="forum-smiley emoji" />).<br />
But I think Böker is really close. The scissors are really good when cutting heavy stuff. Depending on your needs they might be great for you. Once they put something better in place of that wretched serrated blade they will have a winner.</p>
<p dir="auto"><strong>City Tool 3 vs. Climber</strong></p>
<p dir="auto">Blade<br />
:<br />
City Tool 3</p>
<p dir="auto">Scissors<br />
:<br />
Climber</p>
<p dir="auto">Large flat<br />
:<br />
not enough data, call it a draw</p>
<p dir="auto">small flat<br />
:<br />
Climber</p>
<p dir="auto">T&amp;T<br />
:<br />
Climber</p>
<p dir="auto">Scales<br />
:<br />
City Tool 3</p>
<p dir="auto">But not all of this is equal, if you use the Blade 95% of the time and the rest is cutting zip-ties and cable with the scissor, I would call the City Tool the winner. If you mostly open cans and cut cloth-labels of after a shopping spree you should get a Climber.</p>
</blockquote>
<p dir="auto">There's a parcel on the way to you today mate  ;)</p>
<p dir="auto">I'm still very much in mixed minds about this tool. At first I thought the odd serrated blade and driver combo could be quite useful, but now I'm not so sure. I love the shape of the blade, and the overall look of the knife and clip, though I wish that glass breaker was easily removed. Cap lifter and awl look perfectly fine, as does the corkscrew - shame about the lanyard loop screwing up the ergonomics. The scissors sound fixable for lighter work, but am unconvinced overall that the price is worth the money (to me) with the various little niggles.</p>
<p dir="auto">The absence of a Phillips is no biggie for me, as I'd just ensure that whatever pliers tool I paired it up with covered that. The looks of the city version do appeal I must admit. I suspect I'll end up trying one at some point, but it's not tempting me enough to get one with any urgency....</p>
]]></description><link>https://multitool.ninja/post/1172684</link><guid isPermaLink="true">https://multitool.ninja/post/1172684</guid><dc:creator><![CDATA[AimlessWanderer]]></dc:creator><pubDate>Tue, 27 Oct 2015 13:34:33 GMT</pubDate></item><item><title><![CDATA[Reply to Böker City Tool 3 - thoughts after 3 weeks of use on Tue, 27 Oct 2015 12:30:57 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/storky" aria-label="Profile: Storky">@<bdi>Storky</bdi></a> <a href="/post/1172638">said</a>:</p>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/etherealicer" aria-label="Profile: Etherealicer">@<bdi>Etherealicer</bdi></a> <a href="/post/1172622">said</a>:</p>
<blockquote></blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/storky" aria-label="Profile: Storky">@<bdi>Storky</bdi></a> <a href="/post/1172594">said</a>:</p>
<blockquote>
<blockquote></blockquote>
</blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/shibafu" aria-label="Profile: shibafu">@<bdi>shibafu</bdi></a> <a href="/post/1172587">said</a>:</p>
<blockquote>
<blockquote>
<blockquote>
<p dir="auto">While the 3 looks expensive compared to a SAK, the 1 looks like good value compared to something like a Case sodbuster, with which it closely compares.</p>
</blockquote>
<p dir="auto">Sanrenmu start to offer the knives under their own brand name,<br />
so you wait a little until the three layer knives are available.</p>
<p dir="auto"><a href="http://www.ebay.com/itm/srm-wa721-a1-high-quality-steel-ecd-multifunction-folding-knife-w-gift-box/311471267859?hash=item4885226013" rel="nofollow ugc">http://www.ebay.com/itm/srm-wa721-a1-high-quality-steel-ecd-multifunction-folding-knife-w-gift-box/311471267859?hash=item4885226013</a></p>
</blockquote>
<p dir="auto">Pretty close... it looks like the scales are flat whereas in the Böker version has round scales (also, you cannot reverse the clip).<br />
The flat sides of the blade look duller/unfinished.</p>
<p dir="auto">This might be exactly the same knife, however, they put together the unfinished parts.<br />
Could also mean that parts were used that were sorted out by QC</p>
</blockquote>
<p dir="auto">May be, but all the Sanrenmu knives I owend were well made. So perhabs they<br />
only save some finishing steps to reduce the production costs. If the one I<br />
ordered will arrive I will see  :D</p>
</blockquote>
<p dir="auto">Quite possible, but would have to forward it to me for testing.</p>
<p dir="auto">Just going off the pictures I would choose the Böker version every time. The price difference is not that big (in absolutes, maybe 20$) and the rounded scales are awesome.</p>
]]></description><link>https://multitool.ninja/post/1172643</link><guid isPermaLink="true">https://multitool.ninja/post/1172643</guid><dc:creator><![CDATA[Etherealicer]]></dc:creator><pubDate>Tue, 27 Oct 2015 12:30:57 GMT</pubDate></item><item><title><![CDATA[Reply to Böker City Tool 3 - thoughts after 3 weeks of use on Tue, 27 Oct 2015 12:30:43 GMT]]></title><description><![CDATA[<p dir="auto">Am I hypocritical for being more interested in this knife since it's called Sanrenmu than when it was Boker?...  <img src="/assets/uploads/smileys/whistle.gif" alt=":whistle:" title="Whistle" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1172642</link><guid isPermaLink="true">https://multitool.ninja/post/1172642</guid><dc:creator><![CDATA[Corwyn]]></dc:creator><pubDate>Tue, 27 Oct 2015 12:30:43 GMT</pubDate></item><item><title><![CDATA[Reply to Böker City Tool 3 - thoughts after 3 weeks of use on Tue, 27 Oct 2015 12:21:42 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/etherealicer" aria-label="Profile: Etherealicer">@<bdi>Etherealicer</bdi></a> <a href="/post/1172622">said</a>:</p>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/storky" aria-label="Profile: Storky">@<bdi>Storky</bdi></a> <a href="/post/1172594">said</a>:</p>
<blockquote></blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/shibafu" aria-label="Profile: shibafu">@<bdi>shibafu</bdi></a> <a href="/post/1172587">said</a>:</p>
<blockquote>
<blockquote>
<p dir="auto">While the 3 looks expensive compared to a SAK, the 1 looks like good value compared to something like a Case sodbuster, with which it closely compares.</p>
</blockquote>
<p dir="auto">Sanrenmu start to offer the knives under their own brand name,<br />
so you wait a little until the three layer knives are available.</p>
<p dir="auto"><a href="http://www.ebay.com/itm/srm-wa721-a1-high-quality-steel-ecd-multifunction-folding-knife-w-gift-box/311471267859?hash=item4885226013" rel="nofollow ugc">http://www.ebay.com/itm/srm-wa721-a1-high-quality-steel-ecd-multifunction-folding-knife-w-gift-box/311471267859?hash=item4885226013</a></p>
</blockquote>
<p dir="auto">Pretty close... it looks like the scales are flat whereas in the Böker version has round scales (also, you cannot reverse the clip).<br />
The flat sides of the blade look duller/unfinished.</p>
<p dir="auto">This might be exactly the same knife, however, they put together the unfinished parts.<br />
Could also mean that parts were used that were sorted out by QC</p>
</blockquote>
<p dir="auto">May be, but all the Sanrenmu knives I owend were well made. So perhabs they<br />
only save some finishing steps to reduce the production costs. If the one I<br />
ordered will arrive I will see  :D</p>
]]></description><link>https://multitool.ninja/post/1172638</link><guid isPermaLink="true">https://multitool.ninja/post/1172638</guid><dc:creator><![CDATA[Storky]]></dc:creator><pubDate>Tue, 27 Oct 2015 12:21:42 GMT</pubDate></item><item><title><![CDATA[Reply to Böker City Tool 3 - thoughts after 3 weeks of use on Tue, 27 Oct 2015 12:18:12 GMT]]></title><description><![CDATA[<p dir="auto">I doubt that SRM will put their name on inferior products.</p>
<p dir="auto">I do not recall any case where they had such issues, but there have been incidents with products branded as SRM, whilst not really being made by them, copies..</p>
<p dir="auto">(The "official site", was not really the official site and so on, - discussion from a few years ago)</p>
]]></description><link>https://multitool.ninja/post/1172635</link><guid isPermaLink="true">https://multitool.ninja/post/1172635</guid><dc:creator><![CDATA[dks]]></dc:creator><pubDate>Tue, 27 Oct 2015 12:18:12 GMT</pubDate></item><item><title><![CDATA[Reply to Böker City Tool 3 - thoughts after 3 weeks of use on Tue, 27 Oct 2015 12:00:33 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/storky" aria-label="Profile: Storky">@<bdi>Storky</bdi></a> <a href="/post/1172594">said</a>:</p>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/shibafu" aria-label="Profile: shibafu">@<bdi>shibafu</bdi></a> <a href="/post/1172587">said</a>:</p>
<blockquote>
<p dir="auto">While the 3 looks expensive compared to a SAK, the 1 looks like good value compared to something like a Case sodbuster, with which it closely compares.</p>
</blockquote>
<p dir="auto">Sanrenmu start to offer the knives under their own brand name,<br />
so you wait a little until the three layer knives are available.</p>
<p dir="auto"><a href="http://www.ebay.com/itm/srm-wa721-a1-high-quality-steel-ecd-multifunction-folding-knife-w-gift-box/311471267859?hash=item4885226013" rel="nofollow ugc">http://www.ebay.com/itm/srm-wa721-a1-high-quality-steel-ecd-multifunction-folding-knife-w-gift-box/311471267859?hash=item4885226013</a></p>
</blockquote>
<p dir="auto">Pretty close... it looks like the scales are flat whereas in the Böker version has round scales (also, you cannot reverse the clip).<br />
The flat sides of the blade look duller/unfinished.</p>
<p dir="auto">This might be exactly the same knife, however, they put together the unfinished parts.<br />
Could also mean that parts were used that were sorted out by QC</p>
]]></description><link>https://multitool.ninja/post/1172622</link><guid isPermaLink="true">https://multitool.ninja/post/1172622</guid><dc:creator><![CDATA[Etherealicer]]></dc:creator><pubDate>Tue, 27 Oct 2015 12:00:33 GMT</pubDate></item><item><title><![CDATA[Reply to Böker City Tool 3 - thoughts after 3 weeks of use on Tue, 27 Oct 2015 11:50:37 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/storky" aria-label="Profile: Storky">@<bdi>Storky</bdi></a> <a href="/post/1172594">said</a>:</p>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/shibafu" aria-label="Profile: shibafu">@<bdi>shibafu</bdi></a> <a href="/post/1172587">said</a>:</p>
<blockquote>
<p dir="auto">While the 3 looks expensive compared to a SAK, the 1 looks like good value compared to something like a Case sodbuster, with which it closely compares.</p>
</blockquote>
<p dir="auto">Sanrenmu start to offer the knives under their own brand name,<br />
so you wait a little until the three layer knives are available.</p>
<p dir="auto"><a href="http://www.ebay.com/itm/srm-wa721-a1-high-quality-steel-ecd-multifunction-folding-knife-w-gift-box/311471267859?hash=item4885226013" rel="nofollow ugc">http://www.ebay.com/itm/srm-wa721-a1-high-quality-steel-ecd-multifunction-folding-knife-w-gift-box/311471267859?hash=item4885226013</a></p>
</blockquote>
<p dir="auto">It is very tempting to get one of those!<br />
Its cheaper than the boker city 1 too. Atleast to get here.</p>
]]></description><link>https://multitool.ninja/post/1172616</link><guid isPermaLink="true">https://multitool.ninja/post/1172616</guid><dc:creator><![CDATA[Grathr]]></dc:creator><pubDate>Tue, 27 Oct 2015 11:50:37 GMT</pubDate></item><item><title><![CDATA[Reply to Böker City Tool 3 - thoughts after 3 weeks of use on Tue, 27 Oct 2015 11:20:26 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/shibafu" aria-label="Profile: shibafu">@<bdi>shibafu</bdi></a> <a href="/post/1172587">said</a>:<br />
While the 3 looks expensive compared to a SAK, the 1 looks like good value compared to something like a Case sodbuster, with which it closely compares.</p>
</blockquote>
<p dir="auto">Sanrenmu start to offer the knives under their own brand name,<br />
so you wait a little until the three layer knives are available.</p>
<p dir="auto"><a href="http://www.ebay.com/itm/srm-wa721-a1-high-quality-steel-ecd-multifunction-folding-knife-w-gift-box/311471267859?hash=item4885226013" rel="nofollow ugc">http://www.ebay.com/itm/srm-wa721-a1-high-quality-steel-ecd-multifunction-folding-knife-w-gift-box/311471267859?hash=item4885226013</a></p>
]]></description><link>https://multitool.ninja/post/1172594</link><guid isPermaLink="true">https://multitool.ninja/post/1172594</guid><dc:creator><![CDATA[Storky]]></dc:creator><pubDate>Tue, 27 Oct 2015 11:20:26 GMT</pubDate></item><item><title><![CDATA[Reply to Böker City Tool 3 - thoughts after 3 weeks of use on Tue, 27 Oct 2015 11:17:59 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/shibafu" aria-label="Profile: shibafu">@<bdi>shibafu</bdi></a> <a href="/post/1172587">said</a>:<br />
While the 3 looks expensive compared to a SAK, the 1 looks like good value compared to something like a Case sodbuster, with which it closely compares.</p>
</blockquote>
<p dir="auto">That's the thing.  I have plenty of traditional folders and a few slippy OHO knives, but this falls somewhere in the middle and I don't own anything quite like it.  I do wish the pocket clip could be mounted on the reverse side though to suit us left handers. :-\</p>
]]></description><link>https://multitool.ninja/post/1172591</link><guid isPermaLink="true">https://multitool.ninja/post/1172591</guid><dc:creator><![CDATA[Gareth]]></dc:creator><pubDate>Tue, 27 Oct 2015 11:17:59 GMT</pubDate></item><item><title><![CDATA[Reply to Böker City Tool 3 - thoughts after 3 weeks of use on Tue, 27 Oct 2015 11:11:34 GMT]]></title><description><![CDATA[<p dir="auto">While the 3 looks expensive compared to a SAK, the 1 looks like good value compared to something like a Case sodbuster, with which it closely compares.</p>
]]></description><link>https://multitool.ninja/post/1172587</link><guid isPermaLink="true">https://multitool.ninja/post/1172587</guid><dc:creator><![CDATA[shibafu]]></dc:creator><pubDate>Tue, 27 Oct 2015 11:11:34 GMT</pubDate></item><item><title><![CDATA[Reply to Böker City Tool 3 - thoughts after 3 weeks of use on Tue, 27 Oct 2015 10:53:03 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/gareth" aria-label="Profile: Gareth">@<bdi>Gareth</bdi></a> <a href="/post/1172550">said</a>:</p>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/etherealicer" aria-label="Profile: Etherealicer">@<bdi>Etherealicer</bdi></a> <a href="/post/1172174">said</a>:</p>
<blockquote>
<p dir="auto">:D :D :D<br />
have I mentioned that I like the blade <img src="/assets/uploads/smileys/thinking.gif" alt=":think:" title="Thinking" class="forum-smiley emoji" /> Well, can never hurt to say it again... I LOVE that blade :P</p>
<p dir="auto">Please not that the City Tool 1 has smooth screws on one side and torx-heads on the other, unlike the City Tool 3 where there are torx-heads on both sides.</p>
</blockquote>
<p dir="auto">Really, really liking the look of the number 1.  I'm not sure if I like the look of the green or black though. <img src="/assets/uploads/smileys/thinking.gif" alt=":think:" title="Thinking" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">No shop here carries the green one so I cannot really comment, but the black is more like really dark grey and <img src="/assets/uploads/smileys/drool.gif" alt=":drool:" title="drool" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1172576</link><guid isPermaLink="true">https://multitool.ninja/post/1172576</guid><dc:creator><![CDATA[Etherealicer]]></dc:creator><pubDate>Tue, 27 Oct 2015 10:53:03 GMT</pubDate></item><item><title><![CDATA[Reply to Böker City Tool 3 - thoughts after 3 weeks of use on Tue, 27 Oct 2015 10:32:18 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/etherealicer" aria-label="Profile: Etherealicer">@<bdi>Etherealicer</bdi></a> <a href="/post/1172174">said</a>:<br />
:D :D :D<br />
have I mentioned that I like the blade <img src="/assets/uploads/smileys/thinking.gif" alt=":think:" title="Thinking" class="forum-smiley emoji" /> Well, can never hurt to say it again... I LOVE that blade :P</p>
<p dir="auto">Please not that the City Tool 1 has smooth screws on one side and torx-heads on the other, unlike the City Tool 3 where there are torx-heads on both sides.</p>
</blockquote>
<p dir="auto">Really, really liking the look of the number 1.  I'm not sure if I like the look of the green or black though. <img src="/assets/uploads/smileys/thinking.gif" alt=":think:" title="Thinking" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1172550</link><guid isPermaLink="true">https://multitool.ninja/post/1172550</guid><dc:creator><![CDATA[Gareth]]></dc:creator><pubDate>Tue, 27 Oct 2015 10:32:18 GMT</pubDate></item><item><title><![CDATA[Reply to Böker City Tool 3 - thoughts after 3 weeks of use on Tue, 27 Oct 2015 08:13:57 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto">@50ft-trad <a href="/post/1172448">said</a>:<br />
Sounds like it does need some work to get the best from it, with tweaking the scissors and ergonomics. With that in mind, I might as well just overhaul a Juice to get that running smooth, at least that way I get pliers and a proper Phillips  :D Excellent concept, shame the execution isn't quite up to par</p>
<p dir="auto">Many thanks for the insight  <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">I have no inside on the Juice (yet <img src="/assets/uploads/smileys/poke2.gif" alt=":pok:" title="pok" class="forum-smiley emoji" />).<br />
But I think Böker is really close. The scissors are really good when cutting heavy stuff. Depending on your needs they might be great for you. Once they put something better in place of that wretched serrated blade they will have a winner.</p>
<p dir="auto"><strong>City Tool 3 vs. Climber</strong></p>
<p dir="auto">Blade<br />
:<br />
City Tool 3</p>
<p dir="auto">Scissors<br />
:<br />
Climber</p>
<p dir="auto">Large flat<br />
:<br />
not enough data, call it a draw</p>
<p dir="auto">small flat<br />
:<br />
Climber</p>
<p dir="auto">T&amp;T<br />
:<br />
Climber</p>
<p dir="auto">Scales<br />
:<br />
City Tool 3</p>
<p dir="auto">But not all of this is equal, if you use the Blade 95% of the time and the rest is cutting zip-ties and cable with the scissor, I would call the City Tool the winner. If you mostly open cans and cut cloth-labels of after a shopping spree you should get a Climber.</p>
]]></description><link>https://multitool.ninja/post/1172457</link><guid isPermaLink="true">https://multitool.ninja/post/1172457</guid><dc:creator><![CDATA[Etherealicer]]></dc:creator><pubDate>Tue, 27 Oct 2015 08:13:57 GMT</pubDate></item><item><title><![CDATA[Reply to Böker City Tool 3 - thoughts after 3 weeks of use on Tue, 27 Oct 2015 08:01:45 GMT]]></title><description><![CDATA[<p dir="auto">Sounds like it does need some work to get the best from it, with tweaking the scissors and ergonomics. With that in mind, I might as well just overhaul a Juice to get that running smooth, at least that way I get pliers and a proper Phillips  :D Excellent concept, shame the execution isn't quite up to par</p>
<p dir="auto">Many thanks for the insight  <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1172448</link><guid isPermaLink="true">https://multitool.ninja/post/1172448</guid><dc:creator><![CDATA[AimlessWanderer]]></dc:creator><pubDate>Tue, 27 Oct 2015 08:01:45 GMT</pubDate></item><item><title><![CDATA[Reply to Böker City Tool 3 - thoughts after 3 weeks of use on Tue, 27 Oct 2015 05:06:26 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/etherealicer" aria-label="Profile: Etherealicer">@<bdi>Etherealicer</bdi></a> <a href="/post/1172174">said</a>:<br />
:D :D :D<br />
have I mentioned that I like the blade <img src="/assets/uploads/smileys/thinking.gif" alt=":think:" title="Thinking" class="forum-smiley emoji" /> Well, can never hurt to say it again... I LOVE that blade :P</p>
<p dir="auto">Please not that the City Tool 1 has smooth screws on one side and torx-heads on the other, unlike the City Tool 3 where there are torx-heads on both sides.</p>
</blockquote>
<p dir="auto">Now I want one even more...</p>
<p dir="auto">Sent from a device made from star dust using tapatalk</p>
]]></description><link>https://multitool.ninja/post/1172392</link><guid isPermaLink="true">https://multitool.ninja/post/1172392</guid><dc:creator><![CDATA[Grathr]]></dc:creator><pubDate>Tue, 27 Oct 2015 05:06:26 GMT</pubDate></item><item><title><![CDATA[Reply to Böker City Tool 3 - thoughts after 3 weeks of use on Mon, 26 Oct 2015 21:51:27 GMT]]></title><description><![CDATA[<p dir="auto">:D :D :D<br />
have I mentioned that I like the blade <img src="/assets/uploads/smileys/thinking.gif" alt=":think:" title="Thinking" class="forum-smiley emoji" /> Well, can never hurt to say it again... I LOVE that blade :P</p>
<p dir="auto">Please not that the City Tool 1 has smooth screws on one side and torx-heads on the other, unlike the City Tool 3 where there are torx-heads on both sides.</p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/248169_loved.jpg" alt="loved.jpg" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/1172174</link><guid isPermaLink="true">https://multitool.ninja/post/1172174</guid><dc:creator><![CDATA[Etherealicer]]></dc:creator><pubDate>Mon, 26 Oct 2015 21:51:27 GMT</pubDate></item><item><title><![CDATA[Reply to Böker City Tool 3 - thoughts after 3 weeks of use on Mon, 26 Oct 2015 13:36:11 GMT]]></title><description><![CDATA[<p dir="auto">I'm glad you tested one, I was digging them as soon as someone posted a thread when they debuted. So many things I want to buy.....</p>
]]></description><link>https://multitool.ninja/post/1171810</link><guid isPermaLink="true">https://multitool.ninja/post/1171810</guid><dc:creator><![CDATA[Higgins617]]></dc:creator><pubDate>Mon, 26 Oct 2015 13:36:11 GMT</pubDate></item><item><title><![CDATA[Reply to Böker City Tool 3 - thoughts after 3 weeks of use on Mon, 26 Oct 2015 13:10:07 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/etherealicer" aria-label="Profile: Etherealicer">@<bdi>Etherealicer</bdi></a> <a href="/post/1171653">said</a>:</p>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/raistlin65" aria-label="Profile: raistlin65">@<bdi>raistlin65</bdi></a> <a href="/post/1171489">said</a>:</p>
<blockquote></blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/etherealicer" aria-label="Profile: Etherealicer">@<bdi>Etherealicer</bdi></a> <a href="/post/1171356">said</a>:<br />
<strong>The DOMINATION:</strong></p>
<blockquote>
<blockquote>
<p dir="auto">I found the <strong>BLADE</strong> to be perfectly shaped and designed. A blade is more than fancy steel and so, to me this is the single best MT blade, despite not being locking and not being OHO.</p>
</blockquote>
<p dir="auto">I have been so tempted by these because of the look of that blade. And I love the idea of G10 scales  :)</p>
</blockquote>
<p dir="auto">Get a City 1 <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">I want the other tools, too :)</p>
]]></description><link>https://multitool.ninja/post/1171797</link><guid isPermaLink="true">https://multitool.ninja/post/1171797</guid><dc:creator><![CDATA[raistlin65]]></dc:creator><pubDate>Mon, 26 Oct 2015 13:10:07 GMT</pubDate></item><item><title><![CDATA[Reply to Böker City Tool 3 - thoughts after 3 weeks of use on Mon, 26 Oct 2015 09:41:04 GMT]]></title><description><![CDATA[<p dir="auto">:-\</p>
<p dir="auto"><img src="http://forum.multitool.org/index.php?action=dlattach;topic=62732.0;attach=248105;image" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="http://forum.multitool.org/index.php?action=dlattach;topic=62732.0;attach=248104;image" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">:D</p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/248104_Do%20it%20-%20panda.jpg" alt="Do it - panda.jpg" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/248105_Do%20it%20-%20Homer.jpg" alt="Do it - Homer.jpg" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/1171711</link><guid isPermaLink="true">https://multitool.ninja/post/1171711</guid><dc:creator><![CDATA[firiki]]></dc:creator><pubDate>Mon, 26 Oct 2015 09:41:04 GMT</pubDate></item></channel></rss>