<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0"><channel><title><![CDATA[Hemi with broken spring]]></title><description><![CDATA[<p dir="auto">Bought a beautiful 2003 2500 that's fully loaded and that has the 5.7 hemi.  Of course this is the year of the common broken valve spring and this truck joined the club with the previous owner.  I bought it assuming worst case I'd throw a new long block in her. Got the head off and to my surprise the valve was hardly bent and the piston has just a tiny mark.  So with that, I'm pulling both heads and either getting them rebuilt or ordering rebuilt ones and sending mine in. My question is, this truck has 156, 000miles on it and I figured since I have the heads off I could slap a new wp, timing chain and plug wires in. Anything else I should do?  Anyone know of a good company for heads?  I definitely want the updated Springs,  and seats. I don't know much about the 3rd Gen rams, but 156k isn't to much is it?  I only paid 3k for her, and had planned to fix and sell her but I kinda like her lol.</p>
<p dir="auto">Josh</p>
]]></description><link>https://multitool.ninja/topic/63692/hemi-with-broken-spring</link><generator>RSS for Node</generator><lastBuildDate>Thu, 19 Nov 2026 19:25:05 GMT</lastBuildDate><atom:link href="https://multitool.ninja/topic/63692.rss" rel="self" type="application/rss+xml"/><pubDate>Thu, 17 Dec 2015 16:50:53 GMT</pubDate><ttl>60</ttl><item><title><![CDATA[Reply to Hemi with broken spring on Thu, 17 Dec 2015 18:37:41 GMT]]></title><description><![CDATA[<p dir="auto">Thanks guys,  definitely plan and going through the truck while I wait for the heads to be rebuilt and ported and polished</p>
<p dir="auto">Josh</p>
]]></description><link>https://multitool.ninja/post/1198662</link><guid isPermaLink="true">https://multitool.ninja/post/1198662</guid><dc:creator><![CDATA[firefightingjosh]]></dc:creator><pubDate>Thu, 17 Dec 2015 18:37:41 GMT</pubDate></item><item><title><![CDATA[Reply to Hemi with broken spring on Thu, 17 Dec 2015 17:47:54 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto">@Grant Lamontagne <a href="/post/1198628">said</a>:<br />
Got to agree with Mr. Whippy on this one.   Sounds like he has pretty well everything thought out,  almost like he's done this a time or two. ....   :ahhh</p>
</blockquote>
<p dir="auto">::)</p>
<p dir="auto">Actually, I did this exact thing with my first Land-Rover.  Except the valve went through the piston and was setting in the oil pan.</p>
<p dir="auto">Almost had to do this on my Ducati Multistrada.  Unfortunately parts and machining was so expensive, it wasn't really feasible.</p>
]]></description><link>https://multitool.ninja/post/1198637</link><guid isPermaLink="true">https://multitool.ninja/post/1198637</guid><dc:creator><![CDATA[Mr. Whippy]]></dc:creator><pubDate>Thu, 17 Dec 2015 17:47:54 GMT</pubDate></item><item><title><![CDATA[Reply to Hemi with broken spring on Thu, 17 Dec 2015 17:27:53 GMT]]></title><description><![CDATA[<p dir="auto">Got to agree with Mr. Whippy on this one.   Sounds like he has pretty well everything thought out,  almost like he's done this a time or two. ....   :ahhh</p>
<p dir="auto">I'd look at the airflow through the entire system- look at the intake, filter(s), manifolds, catalytic converter, exhaust and muffler.  If anything is damaged, cracked or blocked it could be robbing you of a serious amount of power and eating a lot more fuel.  It might be worth it to upgrade any components that might not be 100%.</p>
<p dir="auto">I'd also check the balance on the radiator fans.</p>
<p dir="auto">Def</p>
]]></description><link>https://multitool.ninja/post/1198628</link><guid isPermaLink="true">https://multitool.ninja/post/1198628</guid><dc:creator><![CDATA[Grant Lamontagne]]></dc:creator><pubDate>Thu, 17 Dec 2015 17:27:53 GMT</pubDate></item><item><title><![CDATA[Reply to Hemi with broken spring on Thu, 17 Dec 2015 17:00:38 GMT]]></title><description><![CDATA[<p dir="auto">I don't know this particular vehicle but IN GENERAL:</p>
<p dir="auto">If you're pulling both heads (which I would do), besides doing the valves/guides and springs, you might want them to polish the ports, for more consistent fuel/air flow.</p>
<p dir="auto">It might be worth looking at the cams and cam lobes to make sure there wasn't damage to the surface when the valve was bent.</p>
<p dir="auto">Also, if it's easy to access, (and you're doing the work yourself), you might want to just replace the oil pump or at least clean the screen.</p>
<p dir="auto">Also, if it's a manual tranny AND the engine is out, it's a quick and easy time to replace the clutch and have the flywheel turned.  Not really necessary, but again, if it's already out, it's a good time to do it, rather than pulling the engine later for the same service (156,000 miles and all...)</p>
]]></description><link>https://multitool.ninja/post/1198617</link><guid isPermaLink="true">https://multitool.ninja/post/1198617</guid><dc:creator><![CDATA[Mr. Whippy]]></dc:creator><pubDate>Thu, 17 Dec 2015 17:00:38 GMT</pubDate></item></channel></rss>