<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0"><channel><title><![CDATA[Possible DIY tool coating]]></title><description><![CDATA[<p dir="auto">After discussing the benefits of powdered graphite in <a href="/topic/64544">this thread</a> I started thinking about the aerosol powdered graphite that I have been using lately.  The stuff stains pretty good, but what if that was a good thing?</p>
<p dir="auto"><img src="http://gallery.multitool.org/var/resizes/No-Names-and-Cheapos/Two%20Dollar%20Challenge/New-Multitool-Mini-Pry-Bar-Bottle-Opener-EDC-Keychain-Pocket-Tool-H-10/Teflon-Mod/20160219_142955_resized_by_AVG_Image_Shrinker.jpg?m=1455908538" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">So, I took the Leatherman Brewzer copy from the <a href="/topic/61485">Two Dollar Challenge</a> to see how evenly I could coat it.  The first attempt did not go well.</p>
<p dir="auto"><img src="http://gallery.multitool.org/var/resizes/No-Names-and-Cheapos/Two%20Dollar%20Challenge/New-Multitool-Mini-Pry-Bar-Bottle-Opener-EDC-Keychain-Pocket-Tool-H-10/Teflon-Mod/20160219_143023_resized_by_AVG_Image_Shrinker.jpg?m=1455908538" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Still, the stuff dries in less than a minute so I flipped the tool and decided to try again on the othr side and I'm pretty pleased with the results.</p>
<p dir="auto"><img src="http://gallery.multitool.org/var/resizes/No-Names-and-Cheapos/Two%20Dollar%20Challenge/New-Multitool-Mini-Pry-Bar-Bottle-Opener-EDC-Keychain-Pocket-Tool-H-10/Teflon-Mod/20160219_143101_resized_by_AVG_Image_Shrinker.jpg?m=1455908537" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">It actually came out pretty nice, with a beautiful slate grey color.  I'm going to carry this one for a while and see how tough the coat turns out to be.  Bear in mind, it is on a pretty polished tool with no surface prep, so if it's going to fail, this is where it will likely happen.</p>
<p dir="auto"><img src="http://gallery.multitool.org/var/resizes/No-Names-and-Cheapos/Two%20Dollar%20Challenge/New-Multitool-Mini-Pry-Bar-Bottle-Opener-EDC-Keychain-Pocket-Tool-H-10/Teflon-Mod/20160219_145653_resized_by_AVG_Image_Shrinker.jpg?m=1455908537" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">I've tried to clean off some of the blowback on other things and it seems pretty impervious, so I have fairly high hopes for this.  If it works, I think I am going to disassemble a PowerLock and spray all of the components and see how that performs.  Since this is a lubricant I really don't need to worry about it getting trapped in the corners like with other coatings so I don't have to worry about the riveted plier head and gears on the PowerLock.</p>
<p dir="auto">This should be interesting.</p>
<p dir="auto">Def</p>
]]></description><link>https://multitool.ninja/topic/64769/possible-diy-tool-coating</link><generator>RSS for Node</generator><lastBuildDate>Thu, 19 Nov 2026 01:50:40 GMT</lastBuildDate><atom:link href="https://multitool.ninja/topic/64769.rss" rel="self" type="application/rss+xml"/><pubDate>Fri, 19 Feb 2016 19:15:12 GMT</pubDate><ttl>60</ttl><item><title><![CDATA[Reply to Possible DIY tool coating on Wed, 27 Apr 2016 16:10:37 GMT]]></title><description><![CDATA[<p dir="auto">Not a big fan of graphite personally, don't ever use it in your SAK pivots or most any aluminium for that matter it  corrodes it. Have fun with it I guess. Better than running the tool dry.</p>
]]></description><link>https://multitool.ninja/post/1260608</link><guid isPermaLink="true">https://multitool.ninja/post/1260608</guid><dc:creator><![CDATA[Wanimator]]></dc:creator><pubDate>Wed, 27 Apr 2016 16:10:37 GMT</pubDate></item><item><title><![CDATA[Reply to Possible DIY tool coating on Tue, 26 Apr 2016 23:20:17 GMT]]></title><description><![CDATA[<p dir="auto">I'm sure they will catch up eventually  ;)</p>
]]></description><link>https://multitool.ninja/post/1260209</link><guid isPermaLink="true">https://multitool.ninja/post/1260209</guid><dc:creator><![CDATA[SteveC]]></dc:creator><pubDate>Tue, 26 Apr 2016 23:20:17 GMT</pubDate></item><item><title><![CDATA[Reply to Possible DIY tool coating on Tue, 26 Apr 2016 22:29:12 GMT]]></title><description><![CDATA[<p dir="auto">Looks good. Although, you ruined your chance to make the handles match the plier head. LOL!</p>
<p dir="auto">That's us mobile</p>
]]></description><link>https://multitool.ninja/post/1260193</link><guid isPermaLink="true">https://multitool.ninja/post/1260193</guid><dc:creator><![CDATA[ducttapetech]]></dc:creator><pubDate>Tue, 26 Apr 2016 22:29:12 GMT</pubDate></item><item><title><![CDATA[Reply to Possible DIY tool coating on Tue, 26 Apr 2016 23:19:09 GMT]]></title><description><![CDATA[<p dir="auto">So I just got a BO ST300 back from Leatherman warranty. They replaced both handles and tools but fixed the loose pivot on the CC plier head. The BO coating was kind of smurfed up on the pliers and stood out against the new handles. Well I remembered that I had picked up a can of this Graphite spray lube after reding this thread. I thought this would be a good test to see how it would work. Well I can tell you that it turned out really well. Looks great and time will tell how it will hold up.</p>
<p dir="auto">Before</p>
<p dir="auto">&lt;a href="<a href="http://s86.photobucket.com/user/asc67/media/DSC07340_zpszpmhjoo9.jpg.html" rel="nofollow ugc">http://s86.photobucket.com/user/asc67/media/DSC07340_zpszpmhjoo9.jpg.html</a>" target="_blank" rel="noopener noreferrer"&gt;&lt;img src="<a href="http://i86.photobucket.com/albums/k115/asc67/DSC07340_zpszpmhjoo9.jpg" rel="nofollow ugc">http://i86.photobucket.com/albums/k115/asc67/DSC07340_zpszpmhjoo9.jpg</a>" alt="banner" style="max-width: 100%; height: auto;" /&gt;&lt;/a&gt;</p>
<p dir="auto">After</p>
<p dir="auto">&lt;a href="<a href="http://s86.photobucket.com/user/asc67/media/DSC07345_zpsvqxfseso.jpg.html" rel="nofollow ugc">http://s86.photobucket.com/user/asc67/media/DSC07345_zpsvqxfseso.jpg.html</a>" target="_blank" rel="noopener noreferrer"&gt;&lt;img src="<a href="http://i86.photobucket.com/albums/k115/asc67/DSC07345_zpsvqxfseso.jpg" rel="nofollow ugc">http://i86.photobucket.com/albums/k115/asc67/DSC07345_zpsvqxfseso.jpg</a>" alt="banner" style="max-width: 100%; height: auto;" /&gt;&lt;/a&gt;</p>
<p dir="auto">&lt;a href="<a href="http://s86.photobucket.com/user/asc67/media/DSC07348_zpsxx2l1qfc.jpg.html" rel="nofollow ugc">http://s86.photobucket.com/user/asc67/media/DSC07348_zpsxx2l1qfc.jpg.html</a>" target="_blank" rel="noopener noreferrer"&gt;&lt;img src="<a href="http://i86.photobucket.com/albums/k115/asc67/DSC07348_zpsxx2l1qfc.jpg" rel="nofollow ugc">http://i86.photobucket.com/albums/k115/asc67/DSC07348_zpsxx2l1qfc.jpg</a>" alt="banner" style="max-width: 100%; height: auto;" /&gt;&lt;/a&gt;</p>
]]></description><link>https://multitool.ninja/post/1260188</link><guid isPermaLink="true">https://multitool.ninja/post/1260188</guid><dc:creator><![CDATA[SteveC]]></dc:creator><pubDate>Tue, 26 Apr 2016 23:19:09 GMT</pubDate></item><item><title><![CDATA[Reply to Possible DIY tool coating on Mon, 22 Feb 2016 13:18:17 GMT]]></title><description><![CDATA[<p dir="auto">I used it on car aerials<br />
It lubricates, does not collect dust and it is a conductor.</p>
]]></description><link>https://multitool.ninja/post/1230976</link><guid isPermaLink="true">https://multitool.ninja/post/1230976</guid><dc:creator><![CDATA[dks]]></dc:creator><pubDate>Mon, 22 Feb 2016 13:18:17 GMT</pubDate></item><item><title><![CDATA[Reply to Possible DIY tool coating on Mon, 22 Feb 2016 12:46:15 GMT]]></title><description><![CDATA[<p dir="auto">Not the same but I'm going to try it , I needed it anyway for a bunch of locks I need to take care of<img src="http://uploads.tapatalk-cdn.com/20160222/98a2004fadca69738d25f5bf82087d37.jpg" alt="" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/1230955</link><guid isPermaLink="true">https://multitool.ninja/post/1230955</guid><dc:creator><![CDATA[kmanct3]]></dc:creator><pubDate>Mon, 22 Feb 2016 12:46:15 GMT</pubDate></item><item><title><![CDATA[Reply to Possible DIY tool coating on Mon, 22 Feb 2016 02:06:14 GMT]]></title><description><![CDATA[<p dir="auto">It is available here in the states. I have a can here at my house. I got it where I used to work so just check around. I will have to try this. Never thought it would actually stay on something. FYI graphite is used in extreme pressure lubricates</p>
]]></description><link>https://multitool.ninja/post/1230750</link><guid isPermaLink="true">https://multitool.ninja/post/1230750</guid><dc:creator><![CDATA[tattoosteve99]]></dc:creator><pubDate>Mon, 22 Feb 2016 02:06:14 GMT</pubDate></item><item><title><![CDATA[Reply to Possible DIY tool coating on Sun, 21 Feb 2016 19:55:27 GMT]]></title><description><![CDATA[<p dir="auto">It has lubricated a few locks very nicely- and the fact that it adheres to stuff means that I don't have to reapply it every few weeks/months like I did with the dry graphite.</p>
<p dir="auto">The drawback is that it is highly pressurized and you end up with some serious blowback.  Don't use it when you have a nice white shirt on.</p>
<p dir="auto">Def</p>
]]></description><link>https://multitool.ninja/post/1230644</link><guid isPermaLink="true">https://multitool.ninja/post/1230644</guid><dc:creator><![CDATA[Grant Lamontagne]]></dc:creator><pubDate>Sun, 21 Feb 2016 19:55:27 GMT</pubDate></item><item><title><![CDATA[Reply to Possible DIY tool coating on Sun, 21 Feb 2016 16:30:00 GMT]]></title><description><![CDATA[<p dir="auto">I don't recall seeing that at my HD , I am going there shortly and I will check. Looks like good stuff</p>
]]></description><link>https://multitool.ninja/post/1230527</link><guid isPermaLink="true">https://multitool.ninja/post/1230527</guid><dc:creator><![CDATA[kmanct3]]></dc:creator><pubDate>Sun, 21 Feb 2016 16:30:00 GMT</pubDate></item><item><title><![CDATA[Reply to Possible DIY tool coating on Sun, 21 Feb 2016 16:26:02 GMT]]></title><description><![CDATA[<p dir="auto">Once it is dry it doesn't seem to leave any stuff on your fingers.  The graphite in this is suspended in some liquid (maybe some kind of alcohol?) that allows it to be propelled by the aerosol.  Once it dries it's pretty solid.</p>
<p dir="auto">Def</p>
]]></description><link>https://multitool.ninja/post/1230523</link><guid isPermaLink="true">https://multitool.ninja/post/1230523</guid><dc:creator><![CDATA[Grant Lamontagne]]></dc:creator><pubDate>Sun, 21 Feb 2016 16:26:02 GMT</pubDate></item><item><title><![CDATA[Reply to Possible DIY tool coating on Sun, 21 Feb 2016 16:23:00 GMT]]></title><description><![CDATA[<p dir="auto">Does the coating leave any residue on your fingers after using the tool?</p>
<p dir="auto">I've used powered graphite to lubricate locks and it creates a mess.</p>
]]></description><link>https://multitool.ninja/post/1230521</link><guid isPermaLink="true">https://multitool.ninja/post/1230521</guid><dc:creator><![CDATA[parnass]]></dc:creator><pubDate>Sun, 21 Feb 2016 16:23:00 GMT</pubDate></item><item><title><![CDATA[Reply to Possible DIY tool coating on Sat, 20 Feb 2016 00:05:01 GMT]]></title><description><![CDATA[<p dir="auto"><img src="/assets/uploads/smileys/popcorn.gif" alt=":popcorn:" title="Popcorn" class="forum-smiley emoji" /></p>
<p dir="auto">Watching with interest.</p>
]]></description><link>https://multitool.ninja/post/1229765</link><guid isPermaLink="true">https://multitool.ninja/post/1229765</guid><dc:creator><![CDATA[Toolslinger]]></dc:creator><pubDate>Sat, 20 Feb 2016 00:05:01 GMT</pubDate></item><item><title><![CDATA[Reply to Possible DIY tool coating on Fri, 19 Feb 2016 21:13:08 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/stevec" aria-label="Profile: SteveC">@<bdi>SteveC</bdi></a> <a href="/post/1229728">said</a>:<br />
Doesn't look like that stuff is available here in the States.</p>
</blockquote>
<p dir="auto">I got it at Home Depot while looking for a tube of dry graphite lubricant like this:</p>
<p dir="auto"><img src="http://www.treemagineers.com/blog/wp-content/uploads/2014/10/graphite-powder.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">It was only because that stuff wasn't available that I decided to try the spray can.</p>
<p dir="auto">I had a few minutes this afternoon and decided to simulate some pocket carry, so I took a handful of coins and loose keys and shook them all together in my hands for a bit.  Then I took a couple of coins and tried to gouge the coating.</p>
<p dir="auto"><img src="http://gallery.multitool.org/var/resizes/No-Names-and-Cheapos/Two%20Dollar%20Challenge/New-Multitool-Mini-Pry-Bar-Bottle-Opener-EDC-Keychain-Pocket-Tool-H-10/Teflon-Mod/20160219_170005_resized_by_AVG_Image_Shrinker.jpg?m=1455915758" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">As you can see, the deliberate gouging caused some damage to the finish, and the coins and keys seem to have chipped some of the finish off, but for the most part it is pretty undamaged.</p>
<p dir="auto">Now, let's keep two things in mind:</p>
<p dir="auto">1- This is not meant to be a protective coating, although it doesn't seem to be doing a bad job overall.</p>
<p dir="auto">2- At roughly <a href="https://www.homedepot.ca/en/home/p.jig-a-loo-graphite-extreme-lubricant.1000131895.html" rel="nofollow ugc">$10/can</a> the coating can be applied to a tool hundreds of times for a very minimal cost.</p>
<p dir="auto">Also remember that this surface was not prepped for any coating- it was mirror polished.</p>
<p dir="auto"><img src="http://gallery.multitool.org/var/resizes/No-Names-and-Cheapos/Two%20Dollar%20Challenge/New-Multitool-Mini-Pry-Bar-Bottle-Opener-EDC-Keychain-Pocket-Tool-H-10/20150821_090147_resized_by_AVG_Image_Shrinker.jpg?m=1440159890" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">So the fact that it is retaining any coating is pretty impressive.  If I proceed to the SOG portion of the test I'll be sure to scuff the metal up somewhat prior to coating.  And, as the SOG lives in a sheath it won't come in contact with coins as much.</p>
<p dir="auto">Def</p>
]]></description><link>https://multitool.ninja/post/1229732</link><guid isPermaLink="true">https://multitool.ninja/post/1229732</guid><dc:creator><![CDATA[Grant Lamontagne]]></dc:creator><pubDate>Fri, 19 Feb 2016 21:13:08 GMT</pubDate></item><item><title><![CDATA[Reply to Possible DIY tool coating on Fri, 19 Feb 2016 20:47:05 GMT]]></title><description><![CDATA[<p dir="auto">Doesn't look like that stuff is available here in the States.</p>
]]></description><link>https://multitool.ninja/post/1229728</link><guid isPermaLink="true">https://multitool.ninja/post/1229728</guid><dc:creator><![CDATA[SteveC]]></dc:creator><pubDate>Fri, 19 Feb 2016 20:47:05 GMT</pubDate></item><item><title><![CDATA[Reply to Possible DIY tool coating on Fri, 19 Feb 2016 20:39:54 GMT]]></title><description><![CDATA[<p dir="auto">At the risk of being derivative....</p>
<p dir="auto"><img src="/assets/uploads/smileys/popcorn.gif" alt=":popcorn:" title="Popcorn" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1229724</link><guid isPermaLink="true">https://multitool.ninja/post/1229724</guid><dc:creator><![CDATA[sLaughterMed]]></dc:creator><pubDate>Fri, 19 Feb 2016 20:39:54 GMT</pubDate></item><item><title><![CDATA[Reply to Possible DIY tool coating on Fri, 19 Feb 2016 19:29:16 GMT]]></title><description><![CDATA[<p dir="auto">I'm with those two  :D</p>
<p dir="auto"><img src="/assets/uploads/smileys/popcorn.gif" alt=":popcorn:" title="Popcorn" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1229699</link><guid isPermaLink="true">https://multitool.ninja/post/1229699</guid><dc:creator><![CDATA[Sparky415]]></dc:creator><pubDate>Fri, 19 Feb 2016 19:29:16 GMT</pubDate></item><item><title><![CDATA[Reply to Possible DIY tool coating on Fri, 19 Feb 2016 19:24:22 GMT]]></title><description><![CDATA[<p dir="auto"><img src="/assets/uploads/smileys/popcorn.gif" alt=":popcorn:" title="Popcorn" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1229696</link><guid isPermaLink="true">https://multitool.ninja/post/1229696</guid><dc:creator><![CDATA[eamo]]></dc:creator><pubDate>Fri, 19 Feb 2016 19:24:22 GMT</pubDate></item><item><title><![CDATA[Reply to Possible DIY tool coating on Fri, 19 Feb 2016 19:20:06 GMT]]></title><description><![CDATA[<p dir="auto"><img src="/assets/uploads/smileys/popcorn.gif" alt=":popcorn:" title="Popcorn" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1229694</link><guid isPermaLink="true">https://multitool.ninja/post/1229694</guid><dc:creator><![CDATA[SteveC]]></dc:creator><pubDate>Fri, 19 Feb 2016 19:20:06 GMT</pubDate></item></channel></rss>