<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0"><channel><title><![CDATA[Suggestions for a technicians multitool]]></title><description><![CDATA[<p dir="auto">Once again, I ask for the help of the community.<br />
At the start of February, I started a new job, with an electronics retailer. I mostly deliver and install tv's, set-top boxes, washing machines, dryers, and similar.<br />
It didn't take long for me to realize that my Suspension is just not fitted for this kind of work - I only use the blade (because it's one-handed and therefore convenient), the pliers, to hold nuts and bolts and the wire cutters, to cut coax cable and electrical cable.<br />
Obviously, I've come to the conclusion that I need a new MT to <s>fuel my addiction</s> help me at work.</p>
<p dir="auto">I admit, I've got a soft spot for Leathermans, but as far as I can tell, none of their newer models with bit adapters, can take normal standard bits, which is a requirement.</p>
<p dir="auto">My priorities are as follows:<br />
Wire cutter, able to cut cleanly through coax cable (roughly 6-8 mm thick) as well as electrical cable.<br />
One handed plain edge blade - as sheeple-friendly as possible.<br />
Bit driver, that will accept standard 1/4" bits, preferably with magnetic retention.<br />
Serrated blade would be nice, but not a requirement if the plain edge has decent edge-retention.</p>
<p dir="auto">Basically, I'm looking for something like the Surge or Charge, but with the ability to use standard bits, instead of Leathermans flattened bits.</p>
<p dir="auto">Any thoughts? Am I looking for something that doesn't exist or have I overlooked the right tool several times and not noticed it?</p>
<p dir="auto">EDIT: BTW, what do you call a guy like me, that installs everything from tv's to dryers, in english? Google Translate didn't exactly give me anything accurate...</p>
]]></description><link>https://multitool.ninja/topic/64887/suggestions-for-a-technicians-multitool</link><generator>RSS for Node</generator><lastBuildDate>Wed, 18 Nov 2026 21:17:32 GMT</lastBuildDate><atom:link href="https://multitool.ninja/topic/64887.rss" rel="self" type="application/rss+xml"/><pubDate>Thu, 25 Feb 2016 20:36:48 GMT</pubDate><ttl>60</ttl><item><title><![CDATA[Reply to Suggestions for a technicians multitool on Wed, 02 Mar 2016 18:59:54 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/ironraven" aria-label="Profile: ironraven">@<bdi>ironraven</bdi></a> <a href="/post/1235113">said</a>:<br />
I hate to say it, but a multi is a compromise. Get a good set of dedicated wire cutters and crimpers, and a utility knife.<br />
[snip]<br />
I know you want minimalist, but there are times when the real thing is your best bet.</p>
</blockquote>
<p dir="auto">I feel you - as much as I'd like to do everything with a multitool, it just ain't happening. But I just want to be prepared - like I said earlier, sometimes I'll come into a customers home to maybe just adjust the tv and before I know it, I gotta cut zip-ties and shorten up their coax cable, because they're tired of having 10 feet of extra cable hanging behind their tv. And I'm lazy; if I can do it on the spot, with a tool that's already on my belt, I'm happy.<br />
If I know beforehand that I'm gonna need tools, I'll bring them in the first time and have them ready.<br />
One of my bosses actually came up to me yesterday with (what I would call) a 6-in-1 screwdriver. I think it holds 10 or 12 bits in the handle, standard 1/4". Again, if I know I'm gonna be needing a screwdriver, I'll bring that in with me. Between that and a good multitool, I'm usually pretty good covered.</p>
<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/tooljoe" aria-label="Profile: ToolJoe">@<bdi>ToolJoe</bdi></a> <a href="/post/1235406">said</a>:<br />
The Leatherman Crunch can use a bit driver. What about one of those, utility knife, some lineman pliers, wire strippers and a multi bit screwdriver?</p>
</blockquote>
<p dir="auto">I've never liked the looks of the Crunch, to be honest. Besides, the blades are on the inside, which is a big no-no for me and it only has a serrated blade, no plain edge. Nonetheless, I'm thinking about it. The locking pliers could prove to be useful in quite a few situations.</p>
<p dir="auto">So far, I'm going for the Wave - got bids on a few eBay-auctions at the moment, hopefully I'll get at least one of them. If not, I might look for a cheap Surge or Charge.</p>
<p dir="auto">Thanks for all your tips guys.  <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/happy0167.gif" alt=":drink:" title="drink" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1235482</link><guid isPermaLink="true">https://multitool.ninja/post/1235482</guid><dc:creator><![CDATA[Freaver]]></dc:creator><pubDate>Wed, 02 Mar 2016 18:59:54 GMT</pubDate></item><item><title><![CDATA[Reply to Suggestions for a technicians multitool on Wed, 02 Mar 2016 16:45:03 GMT]]></title><description><![CDATA[<p dir="auto">The Leatherman Crunch can use a bit driver. What about one of those, utility knife, some lineman pliers, wire strippers and a multi bit screwdriver?</p>
]]></description><link>https://multitool.ninja/post/1235406</link><guid isPermaLink="true">https://multitool.ninja/post/1235406</guid><dc:creator><![CDATA[ToolJoe]]></dc:creator><pubDate>Wed, 02 Mar 2016 16:45:03 GMT</pubDate></item><item><title><![CDATA[Reply to Suggestions for a technicians multitool on Wed, 02 Mar 2016 03:17:29 GMT]]></title><description><![CDATA[<p dir="auto">I hate to say it, but a multi is a compromise. Get a good set of dedicated wire cutters and crimpers, and a utility knife. I'm also going to recommend a dedicated #2 philips and a 3/16" straight, or at least a decent 6-in-1 driver. Having hung enough routers and access points and humped plenty of wire, I really like a driver that is just a driver that can have some reach, and while I've done lots crimps with pliers they do sorta suck</p>
<p dir="auto">And a good multitool, and bit driver or a bit holder that will let you use 1/4" bits with your 6-in-1.</p>
<p dir="auto">I know you want minimalist, but there are times when the real thing is your best bet.</p>
]]></description><link>https://multitool.ninja/post/1235113</link><guid isPermaLink="true">https://multitool.ninja/post/1235113</guid><dc:creator><![CDATA[ironraven]]></dc:creator><pubDate>Wed, 02 Mar 2016 03:17:29 GMT</pubDate></item><item><title><![CDATA[Reply to Suggestions for a technicians multitool on Sun, 28 Feb 2016 01:49:46 GMT]]></title><description><![CDATA[<p dir="auto">I put in another vote for a Wave/Charge with the bit extender <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /> The bit extender comes with the flat bits but you can use reg 1/4 inch bits as well :D The extender is a very nice addition just with the flat bits by themselves but with the ability to use reg bits in it sure does help <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1233585</link><guid isPermaLink="true">https://multitool.ninja/post/1233585</guid><dc:creator><![CDATA[Poncho65]]></dc:creator><pubDate>Sun, 28 Feb 2016 01:49:46 GMT</pubDate></item><item><title><![CDATA[Reply to Suggestions for a technicians multitool on Sat, 27 Feb 2016 18:30:42 GMT]]></title><description><![CDATA[<p dir="auto">You really cannot go wrong with any tool you have thinked so far. I think the rest is just your own feel to it.<br />
Go with your passion I'd say. Wave is probably the best tool for the money on the market right now, but you can always make it a bit lighter by spending extra money for Charge AL and getting that sweet 154CM knife.<br />
And if spring loaded pliers and precision cutting (and the basic quarter inch socket) is a must, get MP-1, its really good too.</p>
<p dir="auto">Surge is quite heavy, I would close that one off.</p>
]]></description><link>https://multitool.ninja/post/1233420</link><guid isPermaLink="true">https://multitool.ninja/post/1233420</guid><dc:creator><![CDATA[Padre]]></dc:creator><pubDate>Sat, 27 Feb 2016 18:30:42 GMT</pubDate></item><item><title><![CDATA[Reply to Suggestions for a technicians multitool on Sat, 27 Feb 2016 18:18:44 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/etherealicer" aria-label="Profile: Etherealicer">@<bdi>Etherealicer</bdi></a> <a href="/post/1233368">said</a>:<br />
I pocket carry a CT on a regular base and I have never lost a bit.<br />
I also glued a magnet into the bit-holder and now it takes all precision bits (Kraftwerk, Wiha, Wera etc...) but I think the CT is not for your line of work I think you are better off with standard 1/4".</p>
<p dir="auto">Personally, I would go for a Spirit Plus (+ additional bit kit), couple of screwdrivers, some pliers, side-cutter and a utility knife (perfect if you have to do some messier work also very people friendly).<br />
The reason is actually simple... The Spirit has tools that the Wave lacks:</p>
<ul>
<li>Awl</li>
<li>Pry-Tool</li>
<li>Chisel-Scraper</li>
<li>Hook :D<br />
I also prefer that you can use the bit-kit without the Spirit and due to standard bit size it can be combined with any bit-kit.</li>
</ul>
</blockquote>
<p dir="auto">Your reasoning for the Spirit is lost on me - awl and hook are already on my Explorer in my pocket, if I need to pry I'll usually go for the bottle opener on the same Explorer and I very rarely need a scraper or chisel. ;)<br />
As for precision bits, I carry a small pen-sized screwdriver with a small selection of bits in the handle. Come to think about it, I actually think they're the same size as the CT uses.<br />
The whole idea was to minimize the amount of tools on me at one time - often I'll come in to a customers home, just to tweak some settings on their tv and the next moment I'm down on the floor, putting new connectors on their cables or trying to straighten bent pins in a connector. In a situation like that, I'd like to go in as "light" as possible, and still be able to do the task, without having to go back to the van and get my tools.<br />
Hope that made sense. :) Basically, I'm lazy and don't like carrying full-size tools when I can avoid it. :D</p>
]]></description><link>https://multitool.ninja/post/1233417</link><guid isPermaLink="true">https://multitool.ninja/post/1233417</guid><dc:creator><![CDATA[Freaver]]></dc:creator><pubDate>Sat, 27 Feb 2016 18:18:44 GMT</pubDate></item><item><title><![CDATA[Reply to Suggestions for a technicians multitool on Sat, 27 Feb 2016 16:27:59 GMT]]></title><description><![CDATA[<p dir="auto">I pocket carry a CT on a regular base and I have never lost a bit.<br />
I also glued a magnet into the bit-holder and now it takes all precision bits (Kraftwerk, Wiha, Wera etc...) but I think the CT is not for your line of work I think you are better off with standard 1/4".</p>
<p dir="auto">Personally, I would go for a Spirit Plus (+ additional bit kit), couple of screwdrivers, some pliers, side-cutter and a utility knife (perfect if you have to do some messier work also very people friendly).<br />
The reason is actually simple... The Spirit has tools that the Wave lacks:</p>
<ul>
<li>Awl</li>
<li>Pry-Tool</li>
<li>Chisel-Scraper</li>
<li>Hook :D<br />
I also prefer that you can use the bit-kit without the Spirit and due to standard bit size it can be combined with any bit-kit.</li>
</ul>
]]></description><link>https://multitool.ninja/post/1233368</link><guid isPermaLink="true">https://multitool.ninja/post/1233368</guid><dc:creator><![CDATA[Etherealicer]]></dc:creator><pubDate>Sat, 27 Feb 2016 16:27:59 GMT</pubDate></item><item><title><![CDATA[Reply to Suggestions for a technicians multitool on Sat, 27 Feb 2016 13:36:49 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/padre" aria-label="Profile: Padre">@<bdi>Padre</bdi></a> <a href="/post/1232883">said</a>:<br />
I really doubted the Leatherman bits as well, but they really work. LM got the bite in those just right.</p>
<p dir="auto">But Gerber MP-1 is really good too. I have a good quality Bosch bitkit with it and really like it. Those fullsize bits just take more space, with leatherman you can choose the bits you really need and they go with the same sheath as the tool. The reach is usually enough too.</p>
</blockquote>
<p dir="auto">It's starting to look more and more like I should be getting a Leatherman. My only concern, was really the bits not gripping enough. Having the tool and bit kit in the same sheath is a huge plus, since I already carry more than enough stuff on my person.</p>
<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/anditsgone" aria-label="Profile: anditsgone">@<bdi>anditsgone</bdi></a> <a href="/post/1232884">said</a>:<br />
I think these are your options:</p>
<p dir="auto">Leatherman with bit extender: it also fits full size bits</p>
<p dir="auto">Swisstool PLUS or sprit PLUS: these come with a ratchet and a set of full size bits</p>
<p dir="auto">Gerber MP1: OHO sheeple friendly blade and built in full size bit accepting bit tool.</p>
<p dir="auto">Victorinox Cybertool: does have a bit driver for full size bits and can also store full size bits, it might not be your first option because your'e an MT kind of guy (just like me <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /> ) but this tool is specifacly designed for electronic/computer work.<br />
I advise you to carry it with a dedicated plier for cutting cable and coax cable. (it can cut 1 / 2 mm wire in a notch in the base of the pliers)<br />
More info on SAK wiki page:  <a href="http://www.sakwiki.com/tiki-index.php?page=Cybertool" rel="nofollow ugc">http://www.sakwiki.com/tiki-index.php?page=Cybertool</a></p>
<p dir="auto">I don't think any of the MT's will cut coax cable and you should carry a dedicated plier for those tasks. Also cutting braided copper and steel wire with most MT's is a pain in the ass because it jams itself between the cutters and this jams the pliers <img src="/assets/uploads/smileys/facepalm.gif" alt=":facepalm:" title="Facepalm" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">So far, the only thing that's making me consider the MP1, is the sheeple friendly blade. The flattened Leatherman bits might not be too easy to come by, if I lose them, compared to standard 1/4" bits, but I can still order them online and they take up less room.<br />
As already mentioned, the Cybertool uses a weird size bits. A former colleague got one a while ago and I actually considered getting one, until I saw the bits - haven't seen them for sale anywhere and they seem rather easy to loose.<br />
As far as cutting coax cable with a MT, I haven't had any problems doing it with my Suspension with anvil cutters. Every once in a while, a single thread doesn't get cut on the first try and then I just try again and it goes straight through.<br />
If I carried a dedicated plier for cutting cable, I might as well not carry a MT and just rely on my SAK and a pair of pliers.</p>
<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/padre" aria-label="Profile: Padre">@<bdi>Padre</bdi></a> <a href="/post/1232992">said</a>:<br />
MP-1 has also off centered cutters right? Better for wires.</p>
</blockquote>
<p dir="auto">You're right, they're off center just like on normal side cutters. Would be better for precision cutting.</p>
<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/kampfer" aria-label="Profile: Kampfer">@<bdi>Kampfer</bdi></a> <a href="/post/1233059">said</a>:<br />
SOG powerplay has OHO blades, standard bit driver and a kickass shealth.</p>
</blockquote>
<p dir="auto">I actually did consider SOG, especially their Reactor model, but after seeing your reactions to it, on facebook, I got kinda put off the whole idea with their bit driver. It is a nice sheath though.</p>
<p dir="auto">Bottomline: I'm still in doubt.<br />
The Gerber MP1 has the bonus of having offcenter cutters, making them a bit better for precision cutting, but the drawback being that the sheath (as far as I know), doesn't offer room for anything but the tool.<br />
The Surge has room for the bit kit as well as accessories (perhaps a bit extender and a penlight), but the cutters are the bypass type, so it might not be to efficient with coax cable or electrical cable, for that matter.<br />
Perhaps Wave is the way to go...</p>
<p dir="auto"><em>sigh</em> I'm confused...  :ahhh</p>
]]></description><link>https://multitool.ninja/post/1233309</link><guid isPermaLink="true">https://multitool.ninja/post/1233309</guid><dc:creator><![CDATA[Freaver]]></dc:creator><pubDate>Sat, 27 Feb 2016 13:36:49 GMT</pubDate></item><item><title><![CDATA[Reply to Suggestions for a technicians multitool on Fri, 26 Feb 2016 17:53:30 GMT]]></title><description><![CDATA[<p dir="auto">SOG powerplay has OHO blades, standard bit driver and a kickass shealth.</p>
]]></description><link>https://multitool.ninja/post/1233059</link><guid isPermaLink="true">https://multitool.ninja/post/1233059</guid><dc:creator><![CDATA[Kampfer]]></dc:creator><pubDate>Fri, 26 Feb 2016 17:53:30 GMT</pubDate></item><item><title><![CDATA[Reply to Suggestions for a technicians multitool on Fri, 26 Feb 2016 15:57:42 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/etherealicer" aria-label="Profile: Etherealicer">@<bdi>Etherealicer</bdi></a> <a href="/post/1232903">said</a>:<br />
All precision bits available here are 4mm <img src="/assets/uploads/smileys/thinking.gif" alt=":think:" title="Thinking" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">That's not the case here, at least not the ones I have (small, cheap set). So there are a minimum of four sizes, 3 of them imperial (1/2", 1/4" &amp; 3/16") plus 4mm too. We live and learn...</p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/261909_2016-02-26%2016.51.35.jpg" alt="2016-02-26 16.51.35.jpg" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/1233019</link><guid isPermaLink="true">https://multitool.ninja/post/1233019</guid><dc:creator><![CDATA[Fortytwo]]></dc:creator><pubDate>Fri, 26 Feb 2016 15:57:42 GMT</pubDate></item><item><title><![CDATA[Reply to Suggestions for a technicians multitool on Fri, 26 Feb 2016 14:53:20 GMT]]></title><description><![CDATA[<p dir="auto">MP-1 has also off centered cutters right? Better for wires.</p>
]]></description><link>https://multitool.ninja/post/1232992</link><guid isPermaLink="true">https://multitool.ninja/post/1232992</guid><dc:creator><![CDATA[Padre]]></dc:creator><pubDate>Fri, 26 Feb 2016 14:53:20 GMT</pubDate></item><item><title><![CDATA[Reply to Suggestions for a technicians multitool on Fri, 26 Feb 2016 12:46:25 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/lowtech" aria-label="Profile: lowtech">@<bdi>lowtech</bdi></a> <a href="/post/1232941">said</a>:<br />
I have not tested it, but as the MP1 has anvil cutters, it might work better than the average MT with Bypass cutters?!</p>
</blockquote>
<p dir="auto">The anvil style cutters will probably do a better job as the bypass cutters. The wingman and sidekick cutters also work great.</p>
<p dir="auto">Although the do the job i am not a huge fan of the leatherman replaceable cutters. The stock wave pliers do a better job in my opinion and although i have abused those i never really had a problem with ruined cutting parts.</p>
]]></description><link>https://multitool.ninja/post/1232948</link><guid isPermaLink="true">https://multitool.ninja/post/1232948</guid><dc:creator><![CDATA[anditsgone]]></dc:creator><pubDate>Fri, 26 Feb 2016 12:46:25 GMT</pubDate></item><item><title><![CDATA[Reply to Suggestions for a technicians multitool on Fri, 26 Feb 2016 12:22:38 GMT]]></title><description><![CDATA[<p dir="auto">I have not tested it, but as the MP1 has anvil cutters, it might work better than the average MT with Bypass cutters?!</p>
]]></description><link>https://multitool.ninja/post/1232941</link><guid isPermaLink="true">https://multitool.ninja/post/1232941</guid><dc:creator><![CDATA[lowtech]]></dc:creator><pubDate>Fri, 26 Feb 2016 12:22:38 GMT</pubDate></item><item><title><![CDATA[Reply to Suggestions for a technicians multitool on Fri, 26 Feb 2016 12:12:28 GMT]]></title><description><![CDATA[<p dir="auto">Sorry, i didn't know the cybertool uses special bits.<br />
Thanks for correcting me. Would be a bummer if he bought it and the bits didn't fit.</p>
]]></description><link>https://multitool.ninja/post/1232938</link><guid isPermaLink="true">https://multitool.ninja/post/1232938</guid><dc:creator><![CDATA[anditsgone]]></dc:creator><pubDate>Fri, 26 Feb 2016 12:12:28 GMT</pubDate></item><item><title><![CDATA[Reply to Suggestions for a technicians multitool on Fri, 26 Feb 2016 10:07:51 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/fortytwo" aria-label="Profile: Fortytwo">@<bdi>Fortytwo</bdi></a> <a href="/post/1232901">said</a>:</p>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/etherealicer" aria-label="Profile: Etherealicer">@<bdi>Etherealicer</bdi></a> <a href="/post/1232899">said</a>:</p>
<blockquote></blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/fortytwo" aria-label="Profile: Fortytwo">@<bdi>Fortytwo</bdi></a> said:</p>
<blockquote>
<blockquote>
<p dir="auto">I was under the impression that the Cybertool was using 3/16" bits and not the full sized 1/4" ones? That's not the case then?</p>
</blockquote>
<p dir="auto">You are correct, they are 4mm bits.</p>
</blockquote>
<p dir="auto">So it's even worse than 3/16"? Those I could go out and buy a couple of if they broke (or if I wanted shapes that wasn't included). 4mm? Not so much.</p>
</blockquote>
<p dir="auto">All precision bits available here are 4mm <img src="/assets/uploads/smileys/thinking.gif" alt=":think:" title="Thinking" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1232903</link><guid isPermaLink="true">https://multitool.ninja/post/1232903</guid><dc:creator><![CDATA[Etherealicer]]></dc:creator><pubDate>Fri, 26 Feb 2016 10:07:51 GMT</pubDate></item><item><title><![CDATA[Reply to Suggestions for a technicians multitool on Fri, 26 Feb 2016 09:57:58 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/etherealicer" aria-label="Profile: Etherealicer">@<bdi>Etherealicer</bdi></a> <a href="/post/1232899">said</a>:<br />
I was under the impression that the Cybertool was using 3/16" bits and not the full sized 1/4" ones? That's not the case then?</p>
</blockquote>
<p dir="auto">You are correct, they are 4mm bits.<br />
[/quote]</p>
<p dir="auto">So it's even worse than 3/16"? Those I could go out and buy a couple of if they broke (or if I wanted shapes that wasn't included). 4mm? Not so much.</p>
]]></description><link>https://multitool.ninja/post/1232901</link><guid isPermaLink="true">https://multitool.ninja/post/1232901</guid><dc:creator><![CDATA[Fortytwo]]></dc:creator><pubDate>Fri, 26 Feb 2016 09:57:58 GMT</pubDate></item><item><title><![CDATA[Reply to Suggestions for a technicians multitool on Fri, 26 Feb 2016 09:54:16 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/fortytwo" aria-label="Profile: Fortytwo">@<bdi>Fortytwo</bdi></a> <a href="/post/1232897">said</a>:</p>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/anditsgone" aria-label="Profile: anditsgone">@<bdi>anditsgone</bdi></a> <a href="/post/1232884">said</a>:</p>
<blockquote>
<p dir="auto">I think these are your options:</p>
<p dir="auto">Leatherman with bit extender: it also fits full size bits</p>
<p dir="auto">Swisstool PLUS or sprit PLUS: these come with a ratchet and a set of full size bits</p>
<p dir="auto">Gerber MP1: OHO sheeple friendly blade and built in full size bit accepting bit tool.</p>
<p dir="auto">Victorinox Cybertool: does have a bit driver for full size bits and can also store full size bits, it might not be your first option because your'e an MT kind of guy (just like me <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /> ) but this tool is specifacly designed for electronic/computer work.<br />
I advise you to carry it with a dedicated plier for cutting cable and coax cable. (it can cut 1 / 2 mm wire in a notch in the base of the pliers)<br />
More info on SAK wiki page:  <a href="http://www.sakwiki.com/tiki-index.php?page=Cybertool" rel="nofollow ugc">http://www.sakwiki.com/tiki-index.php?page=Cybertool</a></p>
<p dir="auto">I don't think any of the MT's will cut coax cable and you should carry a dedicated plier for those tasks. Also cutting braided copper and steel wire with most MT's is a pain in the ass because it jams itself between the cutters and this jams the pliers <img src="/assets/uploads/smileys/facepalm.gif" alt=":facepalm:" title="Facepalm" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">I was under the impression that the Cybertool was using 3/16" bits and not the full sized 1/4" ones? That's not the case then?</p>
</blockquote>
<p dir="auto">You are correct, they are 4mm bits.</p>
]]></description><link>https://multitool.ninja/post/1232899</link><guid isPermaLink="true">https://multitool.ninja/post/1232899</guid><dc:creator><![CDATA[Etherealicer]]></dc:creator><pubDate>Fri, 26 Feb 2016 09:54:16 GMT</pubDate></item><item><title><![CDATA[Reply to Suggestions for a technicians multitool on Fri, 26 Feb 2016 09:47:59 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/anditsgone" aria-label="Profile: anditsgone">@<bdi>anditsgone</bdi></a> <a href="/post/1232884">said</a>:<br />
I think these are your options:</p>
<p dir="auto">Leatherman with bit extender: it also fits full size bits</p>
<p dir="auto">Swisstool PLUS or sprit PLUS: these come with a ratchet and a set of full size bits</p>
<p dir="auto">Gerber MP1: OHO sheeple friendly blade and built in full size bit accepting bit tool.</p>
<p dir="auto">Victorinox Cybertool: does have a bit driver for full size bits and can also store full size bits, it might not be your first option because your'e an MT kind of guy (just like me <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /> ) but this tool is specifacly designed for electronic/computer work.<br />
I advise you to carry it with a dedicated plier for cutting cable and coax cable. (it can cut 1 / 2 mm wire in a notch in the base of the pliers)<br />
More info on SAK wiki page:  <a href="http://www.sakwiki.com/tiki-index.php?page=Cybertool" rel="nofollow ugc">http://www.sakwiki.com/tiki-index.php?page=Cybertool</a></p>
<p dir="auto">I don't think any of the MT's will cut coax cable and you should carry a dedicated plier for those tasks. Also cutting braided copper and steel wire with most MT's is a pain in the ass because it jams itself between the cutters and this jams the pliers <img src="/assets/uploads/smileys/facepalm.gif" alt=":facepalm:" title="Facepalm" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">I was under the impression that the Cybertool was using 3/16" bits and not the full sized 1/4" ones? That's not the case then?</p>
]]></description><link>https://multitool.ninja/post/1232897</link><guid isPermaLink="true">https://multitool.ninja/post/1232897</guid><dc:creator><![CDATA[Fortytwo]]></dc:creator><pubDate>Fri, 26 Feb 2016 09:47:59 GMT</pubDate></item><item><title><![CDATA[Reply to Suggestions for a technicians multitool on Fri, 26 Feb 2016 09:11:09 GMT]]></title><description><![CDATA[<p dir="auto">I think these are your options:</p>
<p dir="auto">Leatherman with bit extender: it also fits full size bits</p>
<p dir="auto">Swisstool PLUS or sprit PLUS: these come with a ratchet and a set of full size bits</p>
<p dir="auto">Gerber MP1: OHO sheeple friendly blade and built in full size bit accepting bit tool.</p>
<p dir="auto">Victorinox Cybertool: does have a bit driver for full size bits and can also store full size bits, it might not be your first option because your'e an MT kind of guy (just like me <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /> ) but this tool is specifacly designed for electronic/computer work.<br />
I advise you to carry it with a dedicated plier for cutting cable and coax cable. (it can cut 1 / 2 mm wire in a notch in the base of the pliers)<br />
More info on SAK wiki page:  <a href="http://www.sakwiki.com/tiki-index.php?page=Cybertool" rel="nofollow ugc">http://www.sakwiki.com/tiki-index.php?page=Cybertool</a></p>
<p dir="auto">I don't think any of the MT's will cut coax cable and you should carry a dedicated plier for those tasks. Also cutting braided copper and steel wire with most MT's is a pain in the ass because it jams itself between the cutters and this jams the pliers <img src="/assets/uploads/smileys/facepalm.gif" alt=":facepalm:" title="Facepalm" class="forum-smiley emoji" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/261887_image.jpeg" alt="image.jpeg" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/1232884</link><guid isPermaLink="true">https://multitool.ninja/post/1232884</guid><dc:creator><![CDATA[anditsgone]]></dc:creator><pubDate>Fri, 26 Feb 2016 09:11:09 GMT</pubDate></item><item><title><![CDATA[Reply to Suggestions for a technicians multitool on Fri, 26 Feb 2016 09:05:26 GMT]]></title><description><![CDATA[<p dir="auto">I really doubted the Leatherman bits as well, but they really work. LM got the bite in those just right.</p>
<p dir="auto">But Gerber MP-1 is really good too. I have a good quality Bosch bitkit with it and really like it. Those fullsize bits just take more space, with leatherman you can choose the bits you really need and they go with the same sheath as the tool. The reach is usually enough too.</p>
<p dir="auto">If the devices you fix need huge reach, then it might not be enough.</p>
]]></description><link>https://multitool.ninja/post/1232883</link><guid isPermaLink="true">https://multitool.ninja/post/1232883</guid><dc:creator><![CDATA[Padre]]></dc:creator><pubDate>Fri, 26 Feb 2016 09:05:26 GMT</pubDate></item><item><title><![CDATA[Reply to Suggestions for a technicians multitool on Fri, 26 Feb 2016 07:30:47 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto">@Gerhard Gerber <a href="/post/1232864">said</a>:<br />
Can I be honest?</p>
<p dir="auto">If you rock up at my place to install a tv or dryer armed with a multitool only I'd ask you to leave.  :D</p>
<p dir="auto">No MT will ever have the ergonomics of a simple screwdriver.</p>
<p dir="auto">If you're cutting coax you'll want to strip it, the I would want a good sidecutter.</p>
<p dir="auto">I've done jobs like that, and I would want 4-8 various screwdrivers, 2 sizes sidecutters, large &amp; small pliers depending on the task.<br />
That's not a lot of tools, could easily be carried in a little bag, and saves a lot of swearing.</p>
<blockquote>
<p dir="auto">:D You should have a MT on you anyway, just have the right tools for the job and use the correct parameters to choose the MT <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /></p>
</blockquote>
</blockquote>
<p dir="auto">Don't worry, I've got a toolbag with me as well. ;) It's just to be prepared and to have something on me, that can handle most situations.</p>
<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/aloha" aria-label="Profile: Aloha007">@<bdi>Aloha007</bdi></a> <a href="/post/1232813">said</a>:</p>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/slaughtermed" aria-label="Profile: sLaughterMed">@<bdi>sLaughterMed</bdi></a> <a href="/post/1232716">said</a>:</p>
<blockquote></blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/freaver" aria-label="Profile: Freaver">@<bdi>Freaver</bdi></a> <a href="/post/1232693">said</a>:</p>
<blockquote>
<blockquote>
<p dir="auto">So my doubts towards the capability of Leathermans flat bits, is really unfounded? I have a few multis with a 2 dimensional Philips and they suuuuuck. I always end up either using my SAK or getting a proper screwdriver. I'd say about 90% of the screws I encounter on a daily basis are Philips, and the rest are hex and torx - hence my need for a bit driver.</p>
</blockquote>
<p dir="auto">The Flattened bits are 3-Dimensional. Leatherman essentially  just ground down the sides of standard 1/4" bits so that they take less space in their multi tools, while retaining the same utility.</p>
<p dir="auto"><strong>If you plan on carrying bits around anyhow.... Leatherman sells a Bit Extender for the Wave/Charge/Surge series, which fits in the bit adapter, and takes standard bits as well as Leatherman's bits.</strong> There is also a version that fits on the 3D Phillips driver of the ST300/Rebar/Blast/Fuse/Kick.</p>
</blockquote>
<p dir="auto">^^^ This.  The bit extender is a great addition to the LM MTs with the bit adapter.  Not only can you use standard 1/4 in bits but you get added reach as well.  The LM bits are pretty good and I've found the shape and card they come in very handy to carry.  Heck you get 42 bits in a neat tidy package.</p>
</blockquote>
<p dir="auto">I'll look into that - might be the best option, with my love for LM.</p>
]]></description><link>https://multitool.ninja/post/1232865</link><guid isPermaLink="true">https://multitool.ninja/post/1232865</guid><dc:creator><![CDATA[Freaver]]></dc:creator><pubDate>Fri, 26 Feb 2016 07:30:47 GMT</pubDate></item><item><title><![CDATA[Reply to Suggestions for a technicians multitool on Fri, 26 Feb 2016 07:19:24 GMT]]></title><description><![CDATA[<p dir="auto">Can I be honest?</p>
<p dir="auto">If you rock up at my place to install a tv or dryer armed with a multitool only I'd ask you to leave.  :D</p>
<p dir="auto">No MT will ever have the ergonomics of a simple screwdriver.</p>
<p dir="auto">If you're cutting coax you'll want to strip it, the I would want a good sidecutter.</p>
<p dir="auto">I've done jobs like that, and I would want 4-8 various screwdrivers, 2 sizes sidecutters, large &amp; small pliers depending on the task.<br />
That's not a lot of tools, could easily be carried in a little bag, and saves a lot of swearing.</p>
<blockquote>
<p dir="auto">:D You should have a MT on you anyway, just have the right tools for the job and use the correct parameters to choose the MT <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /></p>
</blockquote>
]]></description><link>https://multitool.ninja/post/1232864</link><guid isPermaLink="true">https://multitool.ninja/post/1232864</guid><dc:creator><![CDATA[Gerhard Gerber]]></dc:creator><pubDate>Fri, 26 Feb 2016 07:19:24 GMT</pubDate></item><item><title><![CDATA[Reply to Suggestions for a technicians multitool on Fri, 26 Feb 2016 01:13:47 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/slaughtermed" aria-label="Profile: sLaughterMed">@<bdi>sLaughterMed</bdi></a> <a href="/post/1232716">said</a>:</p>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/freaver" aria-label="Profile: Freaver">@<bdi>Freaver</bdi></a> <a href="/post/1232693">said</a>:</p>
<blockquote>
<p dir="auto">So my doubts towards the capability of Leathermans flat bits, is really unfounded? I have a few multis with a 2 dimensional Philips and they suuuuuck. I always end up either using my SAK or getting a proper screwdriver. I'd say about 90% of the screws I encounter on a daily basis are Philips, and the rest are hex and torx - hence my need for a bit driver.</p>
</blockquote>
<p dir="auto">The Flattened bits are 3-Dimensional. Leatherman essentially  just ground down the sides of standard 1/4" bits so that they take less space in their multi tools, while retaining the same utility.</p>
<p dir="auto"><strong>If you plan on carrying bits around anyhow.... Leatherman sells a Bit Extender for the Wave/Charge/Surge series, which fits in the bit adapter, and takes standard bits as well as Leatherman's bits.</strong> There is also a version that fits on the 3D Phillips driver of the ST300/Rebar/Blast/Fuse/Kick.</p>
</blockquote>
<p dir="auto">^^^ This.  The bit extender is a great addition to the LM MTs with the bit adapter.  Not only can you use standard 1/4 in bits but you get added reach as well.  The LM bits are pretty good and I've found the shape and card they come in very handy to carry.  Heck you get 42 bits in a neat tidy package.</p>
]]></description><link>https://multitool.ninja/post/1232813</link><guid isPermaLink="true">https://multitool.ninja/post/1232813</guid><dc:creator><![CDATA[Aloha]]></dc:creator><pubDate>Fri, 26 Feb 2016 01:13:47 GMT</pubDate></item><item><title><![CDATA[Reply to Suggestions for a technicians multitool on Thu, 25 Feb 2016 23:52:00 GMT]]></title><description><![CDATA[<p dir="auto">+1 for the MP1  <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1232777</link><guid isPermaLink="true">https://multitool.ninja/post/1232777</guid><dc:creator><![CDATA[kmanct3]]></dc:creator><pubDate>Thu, 25 Feb 2016 23:52:00 GMT</pubDate></item></channel></rss>