<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0"><channel><title><![CDATA[leatherman sheaths]]></title><description><![CDATA[<p dir="auto">Hey you guys, I have a question for you. I'm about to buy a leatherman crunch, which is probably sold whithout a sheath. I already have a leatherman rebar whith a leather sheath, so i was wondering if the crunch will fit the rebar sheath. The leatherman website says the rebar sheath is 4'' and the sheath for de crunch is 4,2'', but i think my rebar has a lot of space in there, so i thought it might just fit. Is there someone amongst you who already tried this, or has the possibility to try this?</p>
<p dir="auto">Greetz, Yannick Stern</p>
]]></description><link>https://multitool.ninja/topic/65706/leatherman-sheaths</link><generator>RSS for Node</generator><lastBuildDate>Tue, 17 Nov 2026 21:49:54 GMT</lastBuildDate><atom:link href="https://multitool.ninja/topic/65706.rss" rel="self" type="application/rss+xml"/><pubDate>Mon, 11 Apr 2016 17:38:00 GMT</pubDate><ttl>60</ttl><item><title><![CDATA[Reply to leatherman sheaths on Wed, 01 Jun 2016 05:06:06 GMT]]></title><description><![CDATA[<p dir="auto">I wanted to give more detail as to why the Wave Nylon sheath was retiring, but can't edit my post -</p>
<p dir="auto">The hole in the bottom has stretched/torn/expanded to the point I don't fully trust it to hold in the tool and bit card (they won't fall straight through at this point, but they could potentially work their way out, and if the stitching goes, anything could happen)</p>
<p dir="auto">The velcro Does very little at this point, all the loops have turned to fuzz.</p>
<p dir="auto">The Belt Loop (vertical carry) has held up well, it is starting to "cut" (I wear it against a nylon belt, so "similar" material, but the belt is winning (slowly), but I'm not concerned that this will be a point of failure.</p>
<p dir="auto">The elastic is getting pretty sad as well, it's still snug for now.</p>
<p dir="auto">The exterior of the sheath has held up well, with some minor scarring on the panels, but the edge stitching and cloth tape that covers it all has done fine.</p>
<p dir="auto">All in all, I would say I am "satisfied" with the sheath as a product, It's lasted 3ish years of more or less continuous carry - which given the Velcro and Elastic components, is probably what you might expect.</p>
]]></description><link>https://multitool.ninja/post/1276045</link><guid isPermaLink="true">https://multitool.ninja/post/1276045</guid><dc:creator><![CDATA[Sea Monster]]></dc:creator><pubDate>Wed, 01 Jun 2016 05:06:06 GMT</pubDate></item><item><title><![CDATA[Reply to leatherman sheaths on Wed, 20 Apr 2016 21:38:36 GMT]]></title><description><![CDATA[<p dir="auto">I've got a Molle one that came with a BO Blast (blast from the past?)<br />
I used it as a belt-sheath and stopped wearing it as my belt was cutting through the band. I believe it was the same as Top Gear's Old one?</p>
<p dir="auto">Currently I use a (Wave?) nylon sheath, the one with the sphincter in the bottom so you can put the tool in open, but it is getting pretty close to lights-out as well. (Not Molle, just belt loop)</p>
<p dir="auto">Now I need something new and nylon, and if I have to buy another tool to get it, so be it  :P</p>
]]></description><link>https://multitool.ninja/post/1257725</link><guid isPermaLink="true">https://multitool.ninja/post/1257725</guid><dc:creator><![CDATA[Sea Monster]]></dc:creator><pubDate>Wed, 20 Apr 2016 21:38:36 GMT</pubDate></item><item><title><![CDATA[Reply to leatherman sheaths on Mon, 18 Apr 2016 18:07:41 GMT]]></title><description><![CDATA[<p dir="auto">Now for your larger tools, Surge, ST300 I love my Molle XL.  That is a good sheath.</p>
]]></description><link>https://multitool.ninja/post/1256572</link><guid isPermaLink="true">https://multitool.ninja/post/1256572</guid><dc:creator><![CDATA[Aloha]]></dc:creator><pubDate>Mon, 18 Apr 2016 18:07:41 GMT</pubDate></item><item><title><![CDATA[Reply to leatherman sheaths on Mon, 18 Apr 2016 17:49:26 GMT]]></title><description><![CDATA[<p dir="auto">I will keep an eye out for that type <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1256563</link><guid isPermaLink="true">https://multitool.ninja/post/1256563</guid><dc:creator><![CDATA[Poncho65]]></dc:creator><pubDate>Mon, 18 Apr 2016 17:49:26 GMT</pubDate></item><item><title><![CDATA[Reply to leatherman sheaths on Mon, 18 Apr 2016 17:26:39 GMT]]></title><description><![CDATA[<p dir="auto">IMO go with the one with Leatherman at the top and the large drain hole.  To me it feels better made and the sides are sloped which gives me easier access to my tool.  The snap is also better quality than the other ( at least on mine ).  The paint or whatever coating that is on the snap came off pretty easy while the other seems like its BO and is looking great.</p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/267933_IMG_0670%20copy.jpg" alt="IMG_0670 copy.jpg" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/267935_IMG_0672%20copy.jpg" alt="IMG_0672 copy.jpg" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/1256557</link><guid isPermaLink="true">https://multitool.ninja/post/1256557</guid><dc:creator><![CDATA[Aloha]]></dc:creator><pubDate>Mon, 18 Apr 2016 17:26:39 GMT</pubDate></item><item><title><![CDATA[Reply to leatherman sheaths on Mon, 18 Apr 2016 17:16:28 GMT]]></title><description><![CDATA[<p dir="auto">I think I may give the molle sheaths a go <img src="/assets/uploads/smileys/thinking.gif" alt=":think:" title="Thinking" class="forum-smiley emoji" /> they do look nice. Which do you guys prefer new style or old cause they both seem to have there own set of pros and cons? I am gonna go by top-gears old and new  <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1256554</link><guid isPermaLink="true">https://multitool.ninja/post/1256554</guid><dc:creator><![CDATA[Poncho65]]></dc:creator><pubDate>Mon, 18 Apr 2016 17:16:28 GMT</pubDate></item><item><title><![CDATA[Reply to leatherman sheaths on Mon, 18 Apr 2016 17:18:35 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/poncho65" aria-label="Profile: Poncho65">@<bdi>Poncho65</bdi></a> <a href="/post/1256525">said</a>:<br />
I do wish that the clip was an option on at least a few of there sheaths nowadays though :-\ that would be nice to be able to clip to a pocket or inside of a backpack on a pocket.  That way you could just unzip the pocket a little and it would be easily accessible <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">This is why I run the molle sheaths.  It was getting real old taking my belt off when I wasn't getting down to "business"  <img src="/assets/uploads/smileys/rofl.gif" alt=":rofl:" title="rofl" class="forum-smiley emoji" /></p>
<p dir="auto">Great post TG24  <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1256531</link><guid isPermaLink="true">https://multitool.ninja/post/1256531</guid><dc:creator><![CDATA[Aloha]]></dc:creator><pubDate>Mon, 18 Apr 2016 17:18:35 GMT</pubDate></item><item><title><![CDATA[Reply to leatherman sheaths on Mon, 18 Apr 2016 16:17:04 GMT]]></title><description><![CDATA[<p dir="auto">I do wish that the clip was an option on at least a few of there sheaths nowadays though :-\ that would be nice to be able to clip to a pocket or inside of a backpack on a pocket.  That way you could just unzip the pocket a little and it would be easily accessible <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1256525</link><guid isPermaLink="true">https://multitool.ninja/post/1256525</guid><dc:creator><![CDATA[Poncho65]]></dc:creator><pubDate>Mon, 18 Apr 2016 16:17:04 GMT</pubDate></item><item><title><![CDATA[Reply to leatherman sheaths on Mon, 18 Apr 2016 12:26:50 GMT]]></title><description><![CDATA[<p dir="auto">That looks like an OG Supertool sheath and no longer available.  Keep a look out on E-bay as they come up once in a while.</p>
]]></description><link>https://multitool.ninja/post/1256374</link><guid isPermaLink="true">https://multitool.ninja/post/1256374</guid><dc:creator><![CDATA[SteveC]]></dc:creator><pubDate>Mon, 18 Apr 2016 12:26:50 GMT</pubDate></item><item><title><![CDATA[Reply to leatherman sheaths on Mon, 18 Apr 2016 05:05:15 GMT]]></title><description><![CDATA[<p dir="auto">Well, since we are talking Leatherman sheaths, I have a question....</p>
<p dir="auto">I have been using the sheath pictured for several years. I really like it, it fits my needs. I have been carrying my original Wave in it.</p>
<p dir="auto">I just bought a BO new model Wave and would like to get another sheath just like this older one. I don't believe this sheath was for the Wave. Any ideas on what it was for, or help locating another like it?</p>
<p dir="auto">I prefer the belt clip, so I can use it on belt, pocket or edge of something.</p>
<p dir="auto">Thanks!!!</p>
<p dir="auto"><img src="http://uploads.tapatalk-cdn.com/20160418/596ba315a8e09e144387cd812feab6c5.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://uploads.tapatalk-cdn.com/20160418/7bcdd8c559f8e33fcf40308cf306a404.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://uploads.tapatalk-cdn.com/20160418/8cab2e9f8784d4acdd22a1e47a733700.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://uploads.tapatalk-cdn.com/20160418/8a9c48f7e5b54124538c3b1312844018.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://uploads.tapatalk-cdn.com/20160418/9dcd1157e6ce331f056769ab1b33f3b2.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="http://uploads.tapatalk-cdn.com/20160418/d9d722671609863cdcbbcd7c36e6ccbb.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Sent from my Nexus 7 using Tapatalk</p>
]]></description><link>https://multitool.ninja/post/1256264</link><guid isPermaLink="true">https://multitool.ninja/post/1256264</guid><dc:creator><![CDATA[zrxoa1]]></dc:creator><pubDate>Mon, 18 Apr 2016 05:05:15 GMT</pubDate></item><item><title><![CDATA[Reply to leatherman sheaths on Sat, 16 Apr 2016 14:48:29 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/eld" aria-label="Profile: Eld">@<bdi>Eld</bdi></a> <a href="/post/1255504">said</a>:<br />
I have all of that in ny Molle XL sheath. It works when I put the bit kit in the same space as the Surge. But it is a bit wobbly because of the wheight in combination with the narrow belt strap. It is also somewhat fiddly to get the Surge in an out of the sheath as the bits are in the same pocket.</p>
</blockquote>
<p dir="auto">Guess I should have pushed harder ...</p>
<p dir="auto">Anyway, I don't like to store stuff right next to my tool, I always fear something will slide out and get lost when I take out the tool.  And since I never take more than one bit holder with me this has not been a problem for me  ;).</p>
]]></description><link>https://multitool.ninja/post/1255513</link><guid isPermaLink="true">https://multitool.ninja/post/1255513</guid><dc:creator><![CDATA[Top-Gear-24]]></dc:creator><pubDate>Sat, 16 Apr 2016 14:48:29 GMT</pubDate></item><item><title><![CDATA[Reply to leatherman sheaths on Sat, 16 Apr 2016 14:45:46 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto">@captain spaulding <a href="/post/1255239">said</a>:</p>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/top-gear-24" aria-label="Profile: Top-Gear-24">@<bdi>Top-Gear-24</bdi></a> <a href="/post/1254832">said</a>:</p>
<blockquote></blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/eld" aria-label="Profile: Eld">@<bdi>Eld</bdi></a> <a href="/post/1254368">said</a>:</p>
<blockquote>
<blockquote>
<p dir="auto">I Would also be intetrested in the differencies.  I can see on the web that there are different Molle XL sheaths. But descriptions of the differencies are nowhere to be found.</p>
</blockquote>
<p dir="auto">You can get some info on the Leatherman Molle sheaths in <a href="/post/982767">this</a> topic.  I started that topic to point out the difference in quality between the old and new Leatherman Molle sheaths, but somewhere in this topic the Molle XL sheath is mentioned also.</p>
<p dir="auto">If you want more pics compairing both types of Molle sheaths, I could take some pics tomorrow from one of my "regular" Molle sheaths and one of my Molle XL sheaths, just let me know  ;).</p>
</blockquote>
<p dir="auto">There was no pictures of the back or attachment area in your thread.  <img src="/assets/uploads/smileys/twakfl.gif" alt=":twak:" title="twak" class="forum-smiley emoji" />  :D</p>
<p dir="auto">I believe they are slightly different as well. If I remember correctly the older molle attachment left a part "floppy" and the newer style fixed that. I could be wrong though.</p>
</blockquote>
<p dir="auto">Some people you just can't please ...  <img src="/assets/uploads/smileys/rant.gif" alt=":rant:" title="rant!" class="forum-smiley emoji" /></p>
<p dir="auto">;)</p>
<p dir="auto">So, here we go, some pics of my Molle XL, my regular Molle (I believe this is the "older" version, since it came with my BO ST300, a couple of years ago) and my other regular Molle (I believe this is the "newest" version, since it came with my BO Wave and My OHT very recently).  I'm going to call them Molle XL, Molle L "old" and Molle L "new" in this topic.  Some say it's the other way around, that the one that came with my BO ST300 is the new one, and the other that came with the Wave and OHT is the old one, until we know this for sure, I'm going to call the one I got a couple of years ago the "old" one, and the one that I got last month the "new" one.</p>
<p dir="auto">The Molle XL contains my BO Surge with the plastic file/saw thingy, the Molle L "old" contains my BO ST300, and the Molle L "new" contains my Stainless Surge with the plastic file/saw thingy, clear ?</p>
<p dir="auto"><a href="http://s739.photobucket.com/user/Rikske77/media/Leatherman%20Molle%20Sheaths/tmp_11739-IMG_20160416_152656-95356456_zps8zawj5cc.jpg.html" rel="nofollow ugc"><img src="http://i739.photobucket.com/albums/xx39/Rikske77/Leatherman%20Molle%20Sheaths/tmp_11739-IMG_20160416_152656-95356456_zps8zawj5cc.jpg" alt="" class="img-markdown  img-fluid" /></a></p>
<p dir="auto"><a href="http://s739.photobucket.com/user/Rikske77/media/Leatherman%20Molle%20Sheaths/tmp_11739-IMG_20160416_152818577088577_zpsvh64g8nb.jpg.html" rel="nofollow ugc"><img src="http://i739.photobucket.com/albums/xx39/Rikske77/Leatherman%20Molle%20Sheaths/tmp_11739-IMG_20160416_152818577088577_zpsvh64g8nb.jpg" alt="" class="img-markdown  img-fluid" /></a></p>
<p dir="auto"><a href="http://s739.photobucket.com/user/Rikske77/media/Leatherman%20Molle%20Sheaths/tmp_11739-IMG_20160416_153133-2074153377_zps3stlebzb.jpg.html" rel="nofollow ugc"><img src="http://i739.photobucket.com/albums/xx39/Rikske77/Leatherman%20Molle%20Sheaths/tmp_11739-IMG_20160416_153133-2074153377_zps3stlebzb.jpg" alt="" class="img-markdown  img-fluid" /></a></p>
<p dir="auto"><a href="http://s739.photobucket.com/user/Rikske77/media/Leatherman%20Molle%20Sheaths/tmp_11739-IMG_20160416_153051423263381_zps2vl7tu6g.jpg.html" rel="nofollow ugc"><img src="http://i739.photobucket.com/albums/xx39/Rikske77/Leatherman%20Molle%20Sheaths/tmp_11739-IMG_20160416_153051423263381_zps2vl7tu6g.jpg" alt="" class="img-markdown  img-fluid" /></a></p>
<p dir="auto"><a href="http://s739.photobucket.com/user/Rikske77/media/Leatherman%20Molle%20Sheaths/tmp_11739-IMG_20160416_152957-639597718_zpsjh4lgugs.jpg.html" rel="nofollow ugc"><img src="http://i739.photobucket.com/albums/xx39/Rikske77/Leatherman%20Molle%20Sheaths/tmp_11739-IMG_20160416_152957-639597718_zpsjh4lgugs.jpg" alt="" class="img-markdown  img-fluid" /></a></p>
<p dir="auto">Pros and cons:</p>
<p dir="auto"><strong>&lt;u&gt;Molle XL&lt;/u&gt;:</strong></p>
<p dir="auto"><strong>pros:</strong></p>
<ul>
<li>very well made, strong, sturdy feeling.</li>
<li>four horizontal loops on the back, so more options to weave the vertical loop between them (to make the sheath ride lower on your belt).</li>
<li>the vertical loop on the back is not folded over before closing the snap button, so it feels less thick.</li>
<li>awesome velcro patch on sheath and flap (flap being the part of the sheath you pull down to close it, I don't know if it's the right word).</li>
<li>side pockets for fire steel or flashlight.</li>
<li>the plastic thingy for the saw/file is nicely stored between the tool and the velcro, instead of between the tool and the back of the sheath.</li>
</ul>
<p dir="auto"><strong>cons:</strong></p>
<ul>
<li>bigger and thicker than the other two.</li>
<li>a bit more expensive (over here I believe the XL costs 5 Euro extra).</li>
<li>side pockets don't feel very safe, I always use an S-biner to secure my flashlight or firesteel to my belt, in case it should slide out the side pockets.</li>
</ul>
<p dir="auto"><strong>&lt;u&gt;Molle L "old"&lt;/u&gt;:</strong></p>
<p dir="auto"><strong>pros:</strong></p>
<ul>
<li>very well made, strong, sturdy feeling.</li>
<li>awesome velcro patch on sheath and flap (flap being the part of the sheath you pull down to close it, I don't know if it's the right word).</li>
<li>the edge of the sheath (where you slide in the tool) is nicely finished in the same nylon as the rest of the sheath.</li>
<li>smaller and thinner than the Molle XL.</li>
</ul>
<p dir="auto"><strong>cons:</strong></p>
<ul>
<li>only three horizontal loops on the back, so less options to weave the vertical loop between them (to make the sheath ride lower on your belt).</li>
<li>the vertical loop on the back starts quite high, and since there are only three horizontal loops your belt will slide up too high.</li>
<li>the vertical loop is folded over before you close the snap button, which gives a bit of a lump between your side and the back of the sheath.</li>
</ul>
<p dir="auto"><strong>&lt;u&gt;Molle L "new"&lt;/u&gt;:</strong></p>
<p dir="auto"><strong>pros:</strong></p>
<ul>
<li>smaller and thinner than the Molle XL.</li>
<li>the vertical loop on the back starts a bit lower, so your belt can not slide up too high.</li>
</ul>
<p dir="auto"><strong>cons:</strong></p>
<ul>
<li>cheap and flimsy feel.</li>
<li>thinner nylon, especially on the inside, were you put the tool in, a bit less noticeable on the flap (but still cheaper feel than the other two).</li>
<li>the velcro patches feel a lot cheaper, and on one side there's even a 5mm loose edge sticking out over the side of the pouch.</li>
<li>the vertical loop is folded over before you close the snap button, which gives a bit of a lump between your side and the back of the sheath.</li>
<li>the edge of the sheath (where you slide in the tool) is made out of this fake leather/plastic, which feels very cheap like it's going to "crack" soon.</li>
</ul>
<p dir="auto">There, that's all I have to say about Leatherman Molle sheaths ...  ::)</p>
<p dir="auto">And as always, this is just my own, humble opinion  ;).</p>
]]></description><link>https://multitool.ninja/post/1255512</link><guid isPermaLink="true">https://multitool.ninja/post/1255512</guid><dc:creator><![CDATA[Top-Gear-24]]></dc:creator><pubDate>Sat, 16 Apr 2016 14:45:46 GMT</pubDate></item><item><title><![CDATA[Reply to leatherman sheaths on Sat, 16 Apr 2016 14:16:39 GMT]]></title><description><![CDATA[<p dir="auto">I have all of that in ny Molle XL sheath. It works when I put the bit kit in the same space as the Surge. But it is a bit wobbly because of the wheight in combination with the narrow belt strap. It is also somewhat fiddly to get the Surge in an out of the sheath as the bits are in the same pocket.</p>
]]></description><link>https://multitool.ninja/post/1255504</link><guid isPermaLink="true">https://multitool.ninja/post/1255504</guid><dc:creator><![CDATA[Eld]]></dc:creator><pubDate>Sat, 16 Apr 2016 14:16:39 GMT</pubDate></item><item><title><![CDATA[Reply to leatherman sheaths on Sat, 16 Apr 2016 13:13:02 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/eld" aria-label="Profile: Eld">@<bdi>Eld</bdi></a> <a href="/post/1255233">said</a>:</p>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/top-gear-24" aria-label="Profile: Top-Gear-24">@<bdi>Top-Gear-24</bdi></a> <a href="/post/1254836">said</a>:</p>
<blockquote></blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/eld" aria-label="Profile: Eld">@<bdi>Eld</bdi></a> <a href="/post/1254469">said</a>:</p>
<blockquote>
<blockquote>
<p dir="auto">I would love to have a leather sheath for my Surge but I have yet to find a leather sheath with a pocket for the bit kit.</p>
</blockquote>
<p dir="auto">The Surge and ST300 use the same leather sheath, it's the biggest leather sheath Leatherman has and it has a pocket for the bit kit.  I believe its product code is "Premium 4.5" nr. 931017", the small version (for the Wave) has product code "Premium 4" nr. 931016, at least that's what it says on the back of the blister package of one of my Leatherman sheaths.</p>
</blockquote>
<p dir="auto">I have the leather sheath for the Surge and it has a pocket for the file/sawblade but if you put half the bit kit in this pocket (10 bits) you cannot close the sheath without tearing it apart. There is no way you can put the complete bit kit with all 20 bits in the pocket.</p>
</blockquote>
<p dir="auto">I carry my Surge in that leather sheath, along with one plastic bit holder, all the time ...</p>
<p dir="auto">But I never carry two of those bit holders, and I never carry the extra saw/file either, most of the time I use the file on my Surge, and the saw (being shorter than the one on my Swisschamp ...  ::)) stays at home.</p>
<p dir="auto">If you want a leather sheath that can hold your Surge, the saw/file kit, and two bit holder cards, you're going to get a custom sheath I guess.  Not even the Leatherman Molle XL sheath can carry all of that (just tried it).</p>
]]></description><link>https://multitool.ninja/post/1255480</link><guid isPermaLink="true">https://multitool.ninja/post/1255480</guid><dc:creator><![CDATA[Top-Gear-24]]></dc:creator><pubDate>Sat, 16 Apr 2016 13:13:02 GMT</pubDate></item><item><title><![CDATA[Reply to leatherman sheaths on Fri, 15 Apr 2016 18:26:03 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/top-gear-24" aria-label="Profile: Top-Gear-24">@<bdi>Top-Gear-24</bdi></a> <a href="/post/1254832">said</a>:</p>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/eld" aria-label="Profile: Eld">@<bdi>Eld</bdi></a> <a href="/post/1254368">said</a>:</p>
<blockquote>
<p dir="auto">I Would also be intetrested in the differencies.  I can see on the web that there are different Molle XL sheaths. But descriptions of the differencies are nowhere to be found.</p>
</blockquote>
<p dir="auto">You can get some info on the Leatherman Molle sheaths in <a href="/post/982767">this</a> topic.  I started that topic to point out the difference in quality between the old and new Leatherman Molle sheaths, but somewhere in this topic the Molle XL sheath is mentioned also.</p>
<p dir="auto">If you want more pics compairing both types of Molle sheaths, I could take some pics tomorrow from one of my "regular" Molle sheaths and one of my Molle XL sheaths, just let me know  ;).</p>
</blockquote>
<p dir="auto">There was no pictures of the back or attachment area in your thread.  <img src="/assets/uploads/smileys/twakfl.gif" alt=":twak:" title="twak" class="forum-smiley emoji" />  :D</p>
<p dir="auto">I believe they are slightly different as well. If I remember correctly the older molle attachment left a part "floppy" and the newer style fixed that. I could be wrong though.</p>
]]></description><link>https://multitool.ninja/post/1255239</link><guid isPermaLink="true">https://multitool.ninja/post/1255239</guid><dc:creator><![CDATA[captain spaulding]]></dc:creator><pubDate>Fri, 15 Apr 2016 18:26:03 GMT</pubDate></item><item><title><![CDATA[Reply to leatherman sheaths on Fri, 15 Apr 2016 18:17:08 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/top-gear-24" aria-label="Profile: Top-Gear-24">@<bdi>Top-Gear-24</bdi></a> <a href="/post/1254836">said</a>:</p>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/eld" aria-label="Profile: Eld">@<bdi>Eld</bdi></a> <a href="/post/1254469">said</a>:</p>
<blockquote>
<p dir="auto">I would love to have a leather sheath for my Surge but I have yet to find a leather sheath with a pocket for the bit kit.</p>
</blockquote>
<p dir="auto">The Surge and ST300 use the same leather sheath, it's the biggest leather sheath Leatherman has and it has a pocket for the bit kit.  I believe its product code is "Premium 4.5" nr. 931017", the small version (for the Wave) has product code "Premium 4" nr. 931016, at least that's what it says on the back of the blister package of one of my Leatherman sheaths.</p>
</blockquote>
<p dir="auto">I have the leather sheath for the Surge and it has a pocket for the file/sawblade but if you put half the bit kit in this pocket (10 bits) you cannot close the sheath without tearing it apart. There is no way you can put the complete bit kit with all 20 bits in the pocket.</p>
]]></description><link>https://multitool.ninja/post/1255233</link><guid isPermaLink="true">https://multitool.ninja/post/1255233</guid><dc:creator><![CDATA[Eld]]></dc:creator><pubDate>Fri, 15 Apr 2016 18:17:08 GMT</pubDate></item><item><title><![CDATA[Reply to leatherman sheaths on Thu, 14 Apr 2016 18:27:13 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/eld" aria-label="Profile: Eld">@<bdi>Eld</bdi></a> <a href="/post/1254469">said</a>:<br />
I would love to have a leather sheath for my Surge but I have yet to find a leather sheath with a pocket for the bit kit.</p>
</blockquote>
<p dir="auto">The Surge and ST300 use the same leather sheath, it's the biggest leather sheath Leatherman has and it has a pocket for the bit kit.  I believe its product code is "Premium 4.5" nr. 931017", the small version (for the Wave) has product code "Premium 4" nr. 931016, at least that's what it says on the back of the blister package of one of my Leatherman sheaths.</p>
]]></description><link>https://multitool.ninja/post/1254836</link><guid isPermaLink="true">https://multitool.ninja/post/1254836</guid><dc:creator><![CDATA[Top-Gear-24]]></dc:creator><pubDate>Thu, 14 Apr 2016 18:27:13 GMT</pubDate></item><item><title><![CDATA[Reply to leatherman sheaths on Thu, 14 Apr 2016 18:20:08 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/eld" aria-label="Profile: Eld">@<bdi>Eld</bdi></a> <a href="/post/1254368">said</a>:<br />
I Would also be intetrested in the differencies.  I can see on the web that there are different Molle XL sheaths. But descriptions of the differencies are nowhere to be found.</p>
</blockquote>
<p dir="auto">You can get some info on the Leatherman Molle sheaths in <a href="/post/982767">this</a> topic.  I started that topic to point out the difference in quality between the old and new Leatherman Molle sheaths, but somewhere in this topic the Molle XL sheath is mentioned also.</p>
<p dir="auto">If you want more pics compairing both types of Molle sheaths, I could take some pics tomorrow from one of my "regular" Molle sheaths and one of my Molle XL sheaths, just let me know  ;).</p>
]]></description><link>https://multitool.ninja/post/1254832</link><guid isPermaLink="true">https://multitool.ninja/post/1254832</guid><dc:creator><![CDATA[Top-Gear-24]]></dc:creator><pubDate>Thu, 14 Apr 2016 18:20:08 GMT</pubDate></item><item><title><![CDATA[Reply to leatherman sheaths on Thu, 14 Apr 2016 13:46:10 GMT]]></title><description><![CDATA[<p dir="auto">It is a very nice sheath that I wished that hadn't retired  :-\</p>
]]></description><link>https://multitool.ninja/post/1254715</link><guid isPermaLink="true">https://multitool.ninja/post/1254715</guid><dc:creator><![CDATA[Poncho65]]></dc:creator><pubDate>Thu, 14 Apr 2016 13:46:10 GMT</pubDate></item><item><title><![CDATA[Reply to leatherman sheaths on Thu, 14 Apr 2016 13:43:47 GMT]]></title><description><![CDATA[<p dir="auto">That's the sheath I keep my Wave and bit kit, clip on saw and bit extender in. I bought it way back when and it has held up very nicely <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1254714</link><guid isPermaLink="true">https://multitool.ninja/post/1254714</guid><dc:creator><![CDATA[Poncho65]]></dc:creator><pubDate>Thu, 14 Apr 2016 13:43:47 GMT</pubDate></item><item><title><![CDATA[Reply to leatherman sheaths on Wed, 13 Apr 2016 19:24:36 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/eld" aria-label="Profile: Eld">@<bdi>Eld</bdi></a> <a href="/post/1254469">said</a>:<br />
I would love to have a leather sheath for my Surge but I have yet to find a leather sheath with a pocket for the bit kit.</p>
</blockquote>
<p dir="auto"><div class="card col-md-9 col-lg-6 position-relative link-preview p-0">

<div class="card-body">
<h5 class="card-title">
<a class="text-decoration-none" href="http://95.100.110.9/itm/VTG-LEATHERMAN-KNIFE-MULTI-TOOL-KIT-LEATHER-FOLDING-SHEATH-Rare-version-156B-/361532595241?hash&#x3D;item542d059c29:g:~eUAAOSwJQdXDEKv">
Invalid URL
</a>
</h5>
<p class="card-text line-clamp-3"></p>
</div>
<a href="http://95.100.110.9/itm/VTG-LEATHERMAN-KNIFE-MULTI-TOOL-KIT-LEATHER-FOLDING-SHEATH-Rare-version-156B-/361532595241?hash&#x3D;item542d059c29:g:~eUAAOSwJQdXDEKv" class="card-footer text-body-secondary small d-flex gap-2 align-items-center lh-2">



<img src="http://95.100.110.9/favicon.ico" alt="favicon" class="not-responsive overflow-hiddden" style="max-width: 21px; max-height: 21px;" onerror="this.remove()"/>



<p class="d-inline-block text-truncate mb-0"> <span class="text-secondary">(www.ebay.com)</span></p>
</a>
</div></p>
<p dir="auto"><img src="http://i.ebayimg.com/images/g/8ZMAAOSwy5ZXDEKn/s-l1600.jpg" alt="" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/1254472</link><guid isPermaLink="true">https://multitool.ninja/post/1254472</guid><dc:creator><![CDATA[SteveC]]></dc:creator><pubDate>Wed, 13 Apr 2016 19:24:36 GMT</pubDate></item><item><title><![CDATA[Reply to leatherman sheaths on Wed, 13 Apr 2016 19:23:01 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/eld" aria-label="Profile: Eld">@<bdi>Eld</bdi></a> <a href="/post/1254469">said</a>:<br />
I would love to have a leather sheath for my Surge but I have yet to find a leather sheath with a pocket for the bit kit.</p>
</blockquote>
<p dir="auto">I am fairly certain that the leather sheath (factory sheath) I have with my ST300 is the same as my Surge sheath and it has a back elastic pocket for at least one bit card (don't know if two would fit or not <img src="/assets/uploads/smileys/thinking.gif" alt=":think:" title="Thinking" class="forum-smiley emoji" />  I have the bit kit card that has the bit adapter in mine as it's the one that's needed to use the bits with the ST300 <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1254471</link><guid isPermaLink="true">https://multitool.ninja/post/1254471</guid><dc:creator><![CDATA[Poncho65]]></dc:creator><pubDate>Wed, 13 Apr 2016 19:23:01 GMT</pubDate></item><item><title><![CDATA[Reply to leatherman sheaths on Wed, 13 Apr 2016 19:12:41 GMT]]></title><description><![CDATA[<p dir="auto">I would love to have a leather sheath for my Surge but I have yet to find a leather sheath with a pocket for the bit kit.</p>
]]></description><link>https://multitool.ninja/post/1254469</link><guid isPermaLink="true">https://multitool.ninja/post/1254469</guid><dc:creator><![CDATA[Eld]]></dc:creator><pubDate>Wed, 13 Apr 2016 19:12:41 GMT</pubDate></item><item><title><![CDATA[Reply to leatherman sheaths on Wed, 13 Apr 2016 16:40:46 GMT]]></title><description><![CDATA[<p dir="auto">If I had any molle sheaths I would try and answer your questions guys but I don't have any either :-\ I even searched last night on here for info about them and didn't come up with much <img src="/assets/uploads/smileys/shockawe.gif" alt=":sa:" title="shock and awe" class="forum-smiley emoji" /></p>
<p dir="auto">I have been thinking of starting a thread with all the variations of sheaths that I have and seeing if we could compile all info about the LM sheaths together like that but I didn't have the time to get any pics of any sheaths yet <img src="/assets/uploads/smileys/oops2.gif" alt=":oops:" title="oops" class="forum-smiley emoji" /></p>
<p dir="auto">Hopefully somebody with a molle sheath will be by to help answer your questions though <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1254370</link><guid isPermaLink="true">https://multitool.ninja/post/1254370</guid><dc:creator><![CDATA[Poncho65]]></dc:creator><pubDate>Wed, 13 Apr 2016 16:40:46 GMT</pubDate></item></channel></rss>