<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0"><channel><title><![CDATA[Cap lifter on an Executive]]></title><description><![CDATA[<p dir="auto">My girlfriend's birthday is coming up and I plan on gifting her an Executive after giving it a scale swap. Problem is that it lacks the cap lifter. I've searched the Internet a bit and it seems like the orange peeler is the best place to add one.</p>
<p dir="auto">Now, anyone can make a cap lifter (seems like it's otherwise impossible to find a tool without one) but how do one design a <em>good</em> cap lifter?</p>
<p dir="auto">This is my plan right now but I'd be glad to have some input.</p>
<p dir="auto">PS. What pin size does the 75mm series use? I'm considering changing the liners for brass and then I'd have to replace the pins.</p>
]]></description><link>https://multitool.ninja/topic/68026/cap-lifter-on-an-executive</link><generator>RSS for Node</generator><lastBuildDate>Tue, 17 Nov 2026 19:44:54 GMT</lastBuildDate><atom:link href="https://multitool.ninja/topic/68026.rss" rel="self" type="application/rss+xml"/><pubDate>Sat, 20 Aug 2016 18:57:52 GMT</pubDate><ttl>60</ttl><item><title><![CDATA[Reply to Cap lifter on an Executive on Fri, 23 Dec 2016 13:53:00 GMT]]></title><description><![CDATA[<p dir="auto">GJ. I'm sure she will be thrilled to have it  <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /><br />
-Tom</p>
]]></description><link>https://multitool.ninja/post/1400372</link><guid isPermaLink="true">https://multitool.ninja/post/1400372</guid><dc:creator><![CDATA[T14]]></dc:creator><pubDate>Fri, 23 Dec 2016 13:53:00 GMT</pubDate></item><item><title><![CDATA[Reply to Cap lifter on an Executive on Fri, 23 Dec 2016 10:52:25 GMT]]></title><description><![CDATA[<p dir="auto">Thanks guys! I'm pretty happy with how it turned out, it's not perfect but it does look nice and there's nothing stopping me from making a few tweaks later on. I'm hoping to do a bit of a write up  and collect my thoughts on what worked and what didn't as well as what tools were necessary or useful.</p>
]]></description><link>https://multitool.ninja/post/1400313</link><guid isPermaLink="true">https://multitool.ninja/post/1400313</guid><dc:creator><![CDATA[Fortytwo]]></dc:creator><pubDate>Fri, 23 Dec 2016 10:52:25 GMT</pubDate></item><item><title><![CDATA[Reply to Cap lifter on an Executive on Fri, 23 Dec 2016 00:25:15 GMT]]></title><description><![CDATA[<p dir="auto">Nice work man  <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1400146</link><guid isPermaLink="true">https://multitool.ninja/post/1400146</guid><dc:creator><![CDATA[SteveC]]></dc:creator><pubDate>Fri, 23 Dec 2016 00:25:15 GMT</pubDate></item><item><title><![CDATA[Reply to Cap lifter on an Executive on Thu, 22 Dec 2016 23:53:16 GMT]]></title><description><![CDATA[<ol start="8">
<li><img src="/assets/uploads/smileys/like-sign.gif" alt=":like:" title="I like this" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/multitool.gif" alt=":multi:" title="multi" class="forum-smiley emoji" /></li>
</ol>
]]></description><link>https://multitool.ninja/post/1400136</link><guid isPermaLink="true">https://multitool.ninja/post/1400136</guid><dc:creator><![CDATA[cali-SAK-attack]]></dc:creator><pubDate>Thu, 22 Dec 2016 23:53:16 GMT</pubDate></item><item><title><![CDATA[Reply to Cap lifter on an Executive on Thu, 22 Dec 2016 15:22:15 GMT]]></title><description><![CDATA[<p dir="auto">I have to say, that looks pretty great</p>
]]></description><link>https://multitool.ninja/post/1399756</link><guid isPermaLink="true">https://multitool.ninja/post/1399756</guid><dc:creator><![CDATA[sLaughterMed]]></dc:creator><pubDate>Thu, 22 Dec 2016 15:22:15 GMT</pubDate></item><item><title><![CDATA[Reply to Cap lifter on an Executive on Thu, 22 Dec 2016 11:10:09 GMT]]></title><description><![CDATA[<p dir="auto">Lovely stuff there <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1399618</link><guid isPermaLink="true">https://multitool.ninja/post/1399618</guid><dc:creator><![CDATA[firiki]]></dc:creator><pubDate>Thu, 22 Dec 2016 11:10:09 GMT</pubDate></item><item><title><![CDATA[Reply to Cap lifter on an Executive on Thu, 22 Dec 2016 09:02:03 GMT]]></title><description><![CDATA[<p dir="auto">Great work and work in progress pictures  <img src="/assets/uploads/smileys/drool.gif" alt=":drool:" title="drool" class="forum-smiley emoji" />   <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
<p dir="auto">I like to see how other people work!  <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /><br />
Inside I run my house hoover with the nozzle 'behind' the work when using the dremel (but you have to be careful with small parts  <img src="/assets/uploads/smileys/whistle.gif" alt=":whistle:" title="Whistle" class="forum-smiley emoji" /> ) a bit noisy but keeps the dust down  ;)</p>
<p dir="auto"><img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1399586</link><guid isPermaLink="true">https://multitool.ninja/post/1399586</guid><dc:creator><![CDATA[Sparky415]]></dc:creator><pubDate>Thu, 22 Dec 2016 09:02:03 GMT</pubDate></item><item><title><![CDATA[Reply to Cap lifter on an Executive on Wed, 21 Dec 2016 22:14:55 GMT]]></title><description><![CDATA[<p dir="auto">So when I started today I had all the pieces but at a very basic level. So now it was time to get everything where I wanted it. I started by doing the rough shaping of the second scale with my Dremel, followed by sticking the two scales together with my pins and sanding the sides to where I wanted them.<br />
<img src="https://dl.dropboxusercontent.com/u/58245811/Multitool.org%20-%20Pictures/20161221_152842-2064x1161.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">After that I finished the middle liner. I had left it yesterday after cutting the basic shape out with a jewellers saw but now I used first the Dremel  followed by needle files and lastly 600 grit sandpaper to finish it. While working on it I clamped it in my vice after putting electrician's tape on the jaws.<br />
<img src="https://dl.dropboxusercontent.com/u/58245811/Multitool.org%20-%20Pictures/20161221_155552-2064x1161.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="https://dl.dropboxusercontent.com/u/58245811/Multitool.org%20-%20Pictures/20161221_183131-2064x1161.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Next up I counter-sunk the pin holes. I messed this step up a bit and made it to deep on one hole and then I overcompensated on the rest of the holes.<br />
<img src="https://dl.dropboxusercontent.com/u/58245811/Multitool.org%20-%20Pictures/20161221_180751-2064x1161.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Then came the single step that did the most for the look of progress, assembly! For this I made use of my Spirit after covering the pliers in tape so as not to mar anything.<br />
<img src="https://dl.dropboxusercontent.com/u/58245811/Multitool.org%20-%20Pictures/20161221_185245-1161x2064.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">I then started the peening work, the overly countersunk hole is clearly visible at the lover right pin here.<br />
<img src="https://dl.dropboxusercontent.com/u/58245811/Multitool.org%20-%20Pictures/20161221_205420-2064x1161.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">When I had done some basic peening, enough that I felt sure it wouldn't just move through I cut of the extra length of pin.<br />
<img src="https://dl.dropboxusercontent.com/u/58245811/Multitool.org%20-%20Pictures/20161221_205617-2064x1161.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Peening both sides was a bit of a hassle on the super small "anvil" so I resorted to making a harness. I didn't as such hold the knife in place but at least I didn't have to keep it from tipping off.<br />
<img src="https://dl.dropboxusercontent.com/u/58245811/Multitool.org%20-%20Pictures/20161221_213038-2064x1161.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Finally I built myself a tool for the last operation, rounding the edges. It started it's life as a stick, a short piece of double sided tape (the foamy kind) and two different grits of sandpaper (180 and 600).<br />
<img src="https://dl.dropboxusercontent.com/u/58245811/Multitool.org%20-%20Pictures/20161221_215158-2064x1161.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">The brass head on the tweezers had a bubble in the casting so I elected not to throw any more work after a piece that is going to be replaced, other than that the knife is finished. I opted for some rapeseed (canola) oil as finish, since it is both food safe and not overly prone to go rancid.<br />
<img src="https://dl.dropboxusercontent.com/u/58245811/Multitool.org%20-%20Pictures/20161221_223649-2064x1161.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="https://dl.dropboxusercontent.com/u/58245811/Multitool.org%20-%20Pictures/20161221_224702-1161x2064.jpg" alt="" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/1399311</link><guid isPermaLink="true">https://multitool.ninja/post/1399311</guid><dc:creator><![CDATA[Fortytwo]]></dc:creator><pubDate>Wed, 21 Dec 2016 22:14:55 GMT</pubDate></item><item><title><![CDATA[Reply to Cap lifter on an Executive on Tue, 20 Dec 2016 21:59:28 GMT]]></title><description><![CDATA[<p dir="auto">Did some more work today, glued the next scale to the liner, I don't plan on having the toothpick (I would like this one to have no plastic at all) so it was very straight forward.</p>
<p dir="auto">I did the shaping for the first scale, it seems that the tweezers slot didn't come out as centred as I would have liked but it's not to bad either (it doesn't look as bad as in the picture!).<br />
<img src="https://dl.dropboxusercontent.com/u/58245811/Multitool.org%20-%20Pictures/20161220_144753-1161x2064.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">I drilled the holes through the scale I plan on this one having exposed rivets. I should have done this before gluing so I could have lined it up properly. Before I have used a scale as template by drilling through it at the relevant places, I don't know why I didn't do that this time, live and learn I guess.<br />
<img src="https://dl.dropboxusercontent.com/u/58245811/Multitool.org%20-%20Pictures/20161220_144753-1161x2064.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">It's coming along fairly well, all the pieces are started and I should be able to make my morning of 22nd deadline.<br />
<img src="https://dl.dropboxusercontent.com/u/58245811/Multitool.org%20-%20Pictures/20161220_224625-2064x1161.jpg" alt="" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/1398771</link><guid isPermaLink="true">https://multitool.ninja/post/1398771</guid><dc:creator><![CDATA[Fortytwo]]></dc:creator><pubDate>Tue, 20 Dec 2016 21:59:28 GMT</pubDate></item><item><title><![CDATA[Reply to Cap lifter on an Executive on Tue, 20 Dec 2016 17:24:47 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/poncho65" aria-label="Profile: Poncho65">@<bdi>Poncho65</bdi></a> <a href="/post/1398418">said</a>:<br />
Excellent looking work so far <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/like-sign.gif" alt=":like:" title="I like this" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/like-sign.gif" alt=":like:" title="I like this" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">Thank you Poncho, more pictures will come later today.</p>
]]></description><link>https://multitool.ninja/post/1398644</link><guid isPermaLink="true">https://multitool.ninja/post/1398644</guid><dc:creator><![CDATA[Fortytwo]]></dc:creator><pubDate>Tue, 20 Dec 2016 17:24:47 GMT</pubDate></item><item><title><![CDATA[Reply to Cap lifter on an Executive on Tue, 20 Dec 2016 04:40:36 GMT]]></title><description><![CDATA[<p dir="auto">Excellent looking work so far <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/like-sign.gif" alt=":like:" title="I like this" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/like-sign.gif" alt=":like:" title="I like this" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1398418</link><guid isPermaLink="true">https://multitool.ninja/post/1398418</guid><dc:creator><![CDATA[Poncho65]]></dc:creator><pubDate>Tue, 20 Dec 2016 04:40:36 GMT</pubDate></item><item><title><![CDATA[Reply to Cap lifter on an Executive on Mon, 19 Dec 2016 21:58:23 GMT]]></title><description><![CDATA[<p dir="auto">So, more pictures today, this is not a quick job the way I'm doing it. I would say that I have fairly good tools but I'm lacking in workspace.</p>
<p dir="auto">First step was to attach the liners together so that I could shape them all at the same time and after that I did some coarse shaping with my Dremel (Proxxon). I so wish I had had a belt-sander for this, as it where it took ages and I had to work more or less inside my dustbin to catch most of the brass dust.</p>
<p dir="auto"><img src="https://dl.dropboxusercontent.com/u/58245811/Multitool.org%20-%20Pictures/20161219_131950-2064x1161.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="https://dl.dropboxusercontent.com/u/58245811/Multitool.org%20-%20Pictures/20161219_153602-1161x2064.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">After this I did some deburring and then did some finer work with sandpaper, ending in something fairly smooth and of the right size.<br />
<img src="https://dl.dropboxusercontent.com/u/58245811/Multitool.org%20-%20Pictures/20161219_184603-2064x1161.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">The ebony I was planning on using had to go since the blade had wobbled all over the place when I cut it previously (on a table saw)<br />
<img src="https://dl.dropboxusercontent.com/u/58245811/Multitool.org%20-%20Pictures/20161219_203839-2064x1161.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Instead this mystery wood had to do, I was planning on using it for a knife of my own but I can cut more from the ashtray that it came from. I marked out where the tweezers were going and started carving. The chisel is made from some unknown broken tool that my father had laying around. It's just a bit broader than the 3 mm that the T&amp;T are.<br />
<img src="https://dl.dropboxusercontent.com/u/58245811/Multitool.org%20-%20Pictures/20161219_210507-1161x2064.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">After making a rough carving I sawed out the slot and then started the fitting. Don't worry, I sanded the piece so that those ugly scratches wouldn't show.<br />
<img src="https://dl.dropboxusercontent.com/u/58245811/Multitool.org%20-%20Pictures/20161219_213529-2064x1161.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="https://dl.dropboxusercontent.com/u/58245811/Multitool.org%20-%20Pictures/20161219_213254-2064x1161.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Here I held the liner to the scale to see how well the tweezers would fit. Not very well it seems so I marked where it stopped and did some carving on the inside there.<br />
<img src="https://dl.dropboxusercontent.com/u/58245811/Multitool.org%20-%20Pictures/20161219_214657-2064x1161.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Now that's better!<br />
<img src="https://dl.dropboxusercontent.com/u/58245811/Multitool.org%20-%20Pictures/20161219_214835-2064x1161.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Lastly I epoxied the scale to the liner.<br />
<img src="https://dl.dropboxusercontent.com/u/58245811/Multitool.org%20-%20Pictures/20161219_222501-2064x1161.jpg" alt="" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/1398233</link><guid isPermaLink="true">https://multitool.ninja/post/1398233</guid><dc:creator><![CDATA[Fortytwo]]></dc:creator><pubDate>Mon, 19 Dec 2016 21:58:23 GMT</pubDate></item><item><title><![CDATA[Reply to Cap lifter on an Executive on Sat, 17 Dec 2016 20:54:40 GMT]]></title><description><![CDATA[<p dir="auto">Been doing some more work but before I continue and before I put up pictures, am I gonna hit myself for not reaming the holes? Right now I'm using standard drill bits and the holes have a faint but unmistakable triangular shape to them.</p>
]]></description><link>https://multitool.ninja/post/1397073</link><guid isPermaLink="true">https://multitool.ninja/post/1397073</guid><dc:creator><![CDATA[Fortytwo]]></dc:creator><pubDate>Sat, 17 Dec 2016 20:54:40 GMT</pubDate></item><item><title><![CDATA[Reply to Cap lifter on an Executive on Wed, 07 Dec 2016 21:42:36 GMT]]></title><description><![CDATA[<p dir="auto">Really great pics and close-up shots 42 <img src="/assets/uploads/smileys/like-sign.gif" alt=":like:" title="I like this" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/like-sign.gif" alt=":like:" title="I like this" class="forum-smiley emoji" /> I can't wait to see this project finished :o <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1391652</link><guid isPermaLink="true">https://multitool.ninja/post/1391652</guid><dc:creator><![CDATA[Poncho65]]></dc:creator><pubDate>Wed, 07 Dec 2016 21:42:36 GMT</pubDate></item><item><title><![CDATA[Reply to Cap lifter on an Executive on Mon, 05 Dec 2016 21:41:22 GMT]]></title><description><![CDATA[<p dir="auto">Was it August last time I worked on this project? I've been lazy I guess. But since we're coming up on Christmas and it's meant to be a Christmas gift I guess it's time to get started.</p>
<p dir="auto">I have acquired the necessary materials. Brass sheet, brass rod, brass flat stock (for the spacer) and some Ebony.<br />
<img src="https://dl.dropboxusercontent.com/u/58245811/Multitool.org%20-%20Pictures/20161205_205756-2064x1161.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">I decided to start small with the spacer so I cut a small piece of the flat bar (plenty of extra to hold on to while working) and drilled a 2mm hole (no need to be exact, there will be plenty of shaping to do anyway).</p>
<p dir="auto"><img src="https://dl.dropboxusercontent.com/u/58245811/Multitool.org%20-%20Pictures/20161205_211257-1161x2064.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Deburring, it would be awesome if I could use the Dremel for more of the work but since I live in a fairly small apartment I have to consider dust management carefully. I have considered building a removable glovebox/hood for my work surface but nothing has come of it as of yet.</p>
<p dir="auto"><img src="https://dl.dropboxusercontent.com/u/58245811/Multitool.org%20-%20Pictures/20161205_211812-1161x2064.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Next I found myself a M2 machine screw from my tin of screws and a matching nut.</p>
<p dir="auto"><img src="https://dl.dropboxusercontent.com/u/58245811/Multitool.org%20-%20Pictures/20161205_212147-2064x1161.jpg" alt="" class="img-markdown  img-fluid" /><br />
<img src="https://dl.dropboxusercontent.com/u/58245811/Multitool.org%20-%20Pictures/20161205_212155-2064x1161.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">After placing the parts in my vice I can now use the original part as template.</p>
<p dir="auto"><img src="https://dl.dropboxusercontent.com/u/58245811/Multitool.org%20-%20Pictures/20161205_212819-1161x2064.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Coarse cutting.<br />
<img src="https://dl.dropboxusercontent.com/u/58245811/Multitool.org%20-%20Pictures/20161205_214700-1161x2064.jpg" alt="" class="img-markdown  img-fluid" /><br />
And coarse filing.<br />
<img src="https://dl.dropboxusercontent.com/u/58245811/Multitool.org%20-%20Pictures/20161205_214954-1161x2064.jpg" alt="" class="img-markdown  img-fluid" /><br />
And needle file for the last work.<br />
<img src="https://dl.dropboxusercontent.com/u/58245811/Multitool.org%20-%20Pictures/20161205_215244-1161x2064.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">When the side is done it's time to go on to the next side, basically going through the same steps again.<br />
<img src="https://dl.dropboxusercontent.com/u/58245811/Multitool.org%20-%20Pictures/20161205_215919-1161x2064.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">And this is where I left of for today, it's going to take some time but hopefully that will pay of in result. There are quite a few pictures now so it would be nice if a Moderator would be so kind as to add a warning in the topic title for those with limited bandwidth.</p>
]]></description><link>https://multitool.ninja/post/1390426</link><guid isPermaLink="true">https://multitool.ninja/post/1390426</guid><dc:creator><![CDATA[Fortytwo]]></dc:creator><pubDate>Mon, 05 Dec 2016 21:41:22 GMT</pubDate></item><item><title><![CDATA[Reply to Cap lifter on an Executive on Sat, 27 Aug 2016 20:27:01 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/enki-ck" aria-label="Profile: enki_ck">@<bdi>enki_ck</bdi></a> <a href="/post/1334523">said</a>:<br />
What tools did you use to make the cuts for the bottle opener? Have any pics of the process?</p>
</blockquote>
<p dir="auto">No pictures of the process but I'll upload one now of the tools.<br />
It's almost identical to neillcurries setup from the thread you linked. Parting disks, one single .4mm and a spindle with a stack of 3x.8mm. One for the grunt work and one for precision.  And then a diamond cone to really get in behind the lip and to smoothen things out.<br />
I plan on finish the tools with sand paper and then polish the parts I can get to with a small wheel.</p>
<p dir="auto">For the brass work I used a set off jewelers files and a bigger file, both from Bacho. The brass will also get a finishing sanding after it's finally adapted to the scales.</p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/282960_20160827_221629-2064x1161.jpg" alt="20160827_221629-2064x1161.jpg" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/1334539</link><guid isPermaLink="true">https://multitool.ninja/post/1334539</guid><dc:creator><![CDATA[Fortytwo]]></dc:creator><pubDate>Sat, 27 Aug 2016 20:27:01 GMT</pubDate></item><item><title><![CDATA[Reply to Cap lifter on an Executive on Sat, 27 Aug 2016 19:31:37 GMT]]></title><description><![CDATA[<p dir="auto">What tools did you use to make the cuts for the bottle opener? Have any pics of the process?</p>
]]></description><link>https://multitool.ninja/post/1334523</link><guid isPermaLink="true">https://multitool.ninja/post/1334523</guid><dc:creator><![CDATA[enki_ck]]></dc:creator><pubDate>Sat, 27 Aug 2016 19:31:37 GMT</pubDate></item><item><title><![CDATA[Reply to Cap lifter on an Executive on Sat, 27 Aug 2016 19:00:34 GMT]]></title><description><![CDATA[<p dir="auto">The next step was to get fix the cap lifter. I printed a picture of a Rambler to have a guide to work after and then I first did a test run on some scrap steel sheet before I did my own Executive (less important to get it right) and after that the to be gift Executive.<br />
Making cap lifters is perfect because you really have a good reason to celebrate that you're finished by trying it out <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/282946_20160827_203256-2064x1161.jpg" alt="20160827_203256-2064x1161.jpg" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/282948_20160827_203451-2064x1161.jpg" alt="20160827_203451-2064x1161.jpg" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/1334518</link><guid isPermaLink="true">https://multitool.ninja/post/1334518</guid><dc:creator><![CDATA[Fortytwo]]></dc:creator><pubDate>Sat, 27 Aug 2016 19:00:34 GMT</pubDate></item><item><title><![CDATA[Reply to Cap lifter on an Executive on Sat, 27 Aug 2016 18:56:15 GMT]]></title><description><![CDATA[<p dir="auto">My girlfriend is away so I had to take my chance to work a bit on the tool. So after taking it apart (I really need some better &lt;2 mm drill bits) I started with the least relevant <img src="/assets/uploads/smileys/facepalm.gif" alt=":facepalm:" title="Facepalm" class="forum-smiley emoji" /></p>
<p dir="auto">The tweezers. I felt like they should have a brass head to fit with the brass theme. I made the brass part from a V, meant to be attached to a wall or something.<br />
My file made short work of the brass and I drilled holes to match where the plastic was originally. Then I used small pins  (sold as posts for bead work) and some solder to keep them in place.</p>
<blockquote>
<p dir="auto">@Michel M. <a href="/post/1330082">said</a>:<br />
It's 2 mm pins on 74 mm. There's no problem to do new liners, they're not embossed.</p>
</blockquote>
<p dir="auto">They are embossed though, not so much that I think it will prove a problem.</p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/282940_20160827_120009-1161x2064.jpg" alt="20160827_120009-1161x2064.jpg" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/282942_20160827_120033-2064x1161.jpg" alt="20160827_120033-2064x1161.jpg" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/282944_20160827_121831-1161x2064.jpg" alt="20160827_121831-1161x2064.jpg" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/1334516</link><guid isPermaLink="true">https://multitool.ninja/post/1334516</guid><dc:creator><![CDATA[Fortytwo]]></dc:creator><pubDate>Sat, 27 Aug 2016 18:56:15 GMT</pubDate></item><item><title><![CDATA[Reply to Cap lifter on an Executive on Sun, 21 Aug 2016 08:54:48 GMT]]></title><description><![CDATA[<p dir="auto">Yes, even with a drill press. The edge always have cracks, so we have to sharpen after each use and in this size it's not easy.</p>
]]></description><link>https://multitool.ninja/post/1330116</link><guid isPermaLink="true">https://multitool.ninja/post/1330116</guid><dc:creator><![CDATA[Michel M.]]></dc:creator><pubDate>Sun, 21 Aug 2016 08:54:48 GMT</pubDate></item><item><title><![CDATA[Reply to Cap lifter on an Executive on Sun, 21 Aug 2016 07:06:52 GMT]]></title><description><![CDATA[<p dir="auto">Not sure of the changeover year, but early 74mms have 1.5mm pins.<br />
The 2mm pins are easier to work with but if you want to add 58mm tools like the caplifter/phillips you'll need to drill the hole out to 2mm. I have some carbide drill bits that I bought on eBay. They work really well but are quite fragile to side loads and break easily if not used in a drill press.</p>
]]></description><link>https://multitool.ninja/post/1330089</link><guid isPermaLink="true">https://multitool.ninja/post/1330089</guid><dc:creator><![CDATA[PTRSAK]]></dc:creator><pubDate>Sun, 21 Aug 2016 07:06:52 GMT</pubDate></item><item><title><![CDATA[Reply to Cap lifter on an Executive on Sun, 21 Aug 2016 06:08:56 GMT]]></title><description><![CDATA[<p dir="auto">It's 2 mm pins on 74 mm. There's no problem to do new liners, they're not embossed.</p>
]]></description><link>https://multitool.ninja/post/1330082</link><guid isPermaLink="true">https://multitool.ninja/post/1330082</guid><dc:creator><![CDATA[Michel M.]]></dc:creator><pubDate>Sun, 21 Aug 2016 06:08:56 GMT</pubDate></item><item><title><![CDATA[Reply to Cap lifter on an Executive on Sun, 21 Aug 2016 02:02:34 GMT]]></title><description><![CDATA[<p dir="auto">Can't wait to see what projects that come of this thread <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /></p>
<p dir="auto"><img src="/assets/uploads/smileys/popcorn.gif" alt=":popcorn:" title="Popcorn" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1329987</link><guid isPermaLink="true">https://multitool.ninja/post/1329987</guid><dc:creator><![CDATA[Poncho65]]></dc:creator><pubDate>Sun, 21 Aug 2016 02:02:34 GMT</pubDate></item><item><title><![CDATA[Reply to Cap lifter on an Executive on Sun, 21 Aug 2016 01:17:36 GMT]]></title><description><![CDATA[<p dir="auto">Fit a Nite Ize Doohickey on the keyring.  Adds a prybar (something the orange peeler isn't strong enough for, unlike the 84mm and above bottle opener), wrenches, and of course, a bottle opener.</p>
]]></description><link>https://multitool.ninja/post/1329974</link><guid isPermaLink="true">https://multitool.ninja/post/1329974</guid><dc:creator><![CDATA[cody6268]]></dc:creator><pubDate>Sun, 21 Aug 2016 01:17:36 GMT</pubDate></item></channel></rss>