<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0"><channel><title><![CDATA[Polyclay & Resin Scale]]></title><description><![CDATA[<p dir="auto">I'm planning on doing a couple of posh wood, mother of pearl... SAK scales but for now I'm playing with a poly clay one. Wasn't sure if it was a good idea to post it as I'm not certain it will work but someone might find it interesting. The plan is to create a little scene and then for it to be encased in resin, something a bit different and should be be fun to do. It will be thicker than the standard scales but not by too much. I've seen people create similar scenes in Altoids tins but trying to do the same when you've only a few mm of height isn't easy.</p>
<p dir="auto">I had a play with a simple test one to see if the clay held together, the "sand" base is only around 0.5mm thick, and learnt some do's and don'ts whilst messing around. Also got used to working at that scale although things need to be a fair bit smaller still. Tended to make something that I thought was the right size only to realise it needed to be half that. Also lost many a part by breathing too hard!<br />
&lt;a href="<a href="https://flic.kr/p/MYQHNd" rel="nofollow ugc">https://flic.kr/p/MYQHNd</a>" target="_blank" rel="noopener noreferrer"&gt;&lt;img src="<a href="https://c5.staticflickr.com/6/5519/30179284316_d8508fefaa_c.jpg" rel="nofollow ugc">https://c5.staticflickr.com/6/5519/30179284316_d8508fefaa_c.jpg</a>" alt="banner" style="max-width: 100%; height: auto;" /&gt;&lt;/a&gt;</p>
<p dir="auto">It's not bonded to the knife, it comes off and needs to in order to encase it in resin. Couldn't see how it could be done in situ.</p>
<p dir="auto">I made a start the other day on the coral/zoanthid pivot covers. The photo makes them look huge but are only just over 2mm high. Started with the pivots as you want to make sure the scale still comes off. However I soon decided that I wanted more detail and also wanted the sand to be more white (it's a bit more yellow than in the photo) so stopped.<br />
&lt;a href="<a href="https://flic.kr/p/MnjjHd" rel="nofollow ugc">https://flic.kr/p/MnjjHd</a>" target="_blank" rel="noopener noreferrer"&gt;&lt;img src="<a href="https://c7.staticflickr.com/9/8267/29777275934_5ddc7226a2_c.jpg" rel="nofollow ugc">https://c7.staticflickr.com/9/8267/29777275934_5ddc7226a2_c.jpg</a>" alt="banner" style="max-width: 100%; height: auto;" /&gt;&lt;/a&gt;</p>
<p dir="auto">I've just created a new base and the colour's more to my liking. So if it's of interest to anyone I'll post updates.</p>
]]></description><link>https://multitool.ninja/topic/68900/polyclay-resin-scale</link><generator>RSS for Node</generator><lastBuildDate>Thu, 19 Nov 2026 00:06:02 GMT</lastBuildDate><atom:link href="https://multitool.ninja/topic/68900.rss" rel="self" type="application/rss+xml"/><pubDate>Tue, 18 Oct 2016 15:14:50 GMT</pubDate><ttl>60</ttl><item><title><![CDATA[Reply to Polyclay & Resin Scale on Fri, 27 Jan 2017 15:19:24 GMT]]></title><description><![CDATA[<p dir="auto">This is going to be breathtaking  <img src="/assets/uploads/smileys/popcorn.gif" alt=":popcorn:" title="Popcorn" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1418460</link><guid isPermaLink="true">https://multitool.ninja/post/1418460</guid><dc:creator><![CDATA[T14]]></dc:creator><pubDate>Fri, 27 Jan 2017 15:19:24 GMT</pubDate></item><item><title><![CDATA[Reply to Polyclay & Resin Scale on Thu, 26 Jan 2017 21:27:51 GMT]]></title><description><![CDATA[<p dir="auto"><img src="/assets/uploads/smileys/hatsoff.gif" alt=":hatsoff:" title="Hats Off" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1418031</link><guid isPermaLink="true">https://multitool.ninja/post/1418031</guid><dc:creator><![CDATA[Steinar]]></dc:creator><pubDate>Thu, 26 Jan 2017 21:27:51 GMT</pubDate></item><item><title><![CDATA[Reply to Polyclay & Resin Scale on Thu, 26 Jan 2017 17:18:12 GMT]]></title><description><![CDATA[<p dir="auto">Been lazy so not done loads more but some progress.<br />
&lt;a href="<a href="https://flic.kr/p/QhJEru" rel="nofollow ugc">https://flic.kr/p/QhJEru</a>" target="_blank" rel="noopener noreferrer"&gt;&lt;img src="<a href="https://c1.staticflickr.com/1/630/31694512814_710a1cfbe8_c.jpg" rel="nofollow ugc">https://c1.staticflickr.com/1/630/31694512814_710a1cfbe8_c.jpg</a>" alt="banner" style="max-width: 100%; height: auto;" /&gt;&lt;/a&gt;</p>
]]></description><link>https://multitool.ninja/post/1417889</link><guid isPermaLink="true">https://multitool.ninja/post/1417889</guid><dc:creator><![CDATA[crambie]]></dc:creator><pubDate>Thu, 26 Jan 2017 17:18:12 GMT</pubDate></item><item><title><![CDATA[Reply to Polyclay & Resin Scale on Wed, 30 Nov 2016 16:07:51 GMT]]></title><description><![CDATA[<p dir="auto">He has a friend now, and not a squished one.</p>
]]></description><link>https://multitool.ninja/post/1387388</link><guid isPermaLink="true">https://multitool.ninja/post/1387388</guid><dc:creator><![CDATA[crambie]]></dc:creator><pubDate>Wed, 30 Nov 2016 16:07:51 GMT</pubDate></item><item><title><![CDATA[Reply to Polyclay & Resin Scale on Wed, 30 Nov 2016 16:01:31 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/crambie" aria-label="Profile: crambie">@<bdi>crambie</bdi></a> <a href="/post/1387361">said</a>:<br />
From the side, easy to go too tall and have to start the bit again.<br />
&lt;a href="<a href="https://flic.kr/p/PwrprL" rel="nofollow ugc">https://flic.kr/p/PwrprL</a>" target="_blank" rel="noopener noreferrer"&gt;&lt;img src="<a href="https://c3.staticflickr.com/6/5509/31193219642_a84505def8_c.jpg" rel="nofollow ugc">https://c3.staticflickr.com/6/5509/31193219642_a84505def8_c.jpg</a>" alt="banner" style="max-width: 100%; height: auto;" /&gt;&lt;/a&gt;</p>
</blockquote>
<p dir="auto">I can see how you have to be careful with that. Still, very neat! I like your snail. Thanks for sharing the side pic! <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1387383</link><guid isPermaLink="true">https://multitool.ninja/post/1387383</guid><dc:creator><![CDATA[metasyntax]]></dc:creator><pubDate>Wed, 30 Nov 2016 16:01:31 GMT</pubDate></item><item><title><![CDATA[Reply to Polyclay & Resin Scale on Wed, 30 Nov 2016 15:39:10 GMT]]></title><description><![CDATA[<p dir="auto">From the side, easy to go too tall and have to start the bit again.<br />
&lt;a href="<a href="https://flic.kr/p/PwrprL" rel="nofollow ugc">https://flic.kr/p/PwrprL</a>" target="_blank" rel="noopener noreferrer"&gt;&lt;img src="<a href="https://c3.staticflickr.com/6/5509/31193219642_a84505def8_c.jpg" rel="nofollow ugc">https://c3.staticflickr.com/6/5509/31193219642_a84505def8_c.jpg</a>" alt="banner" style="max-width: 100%; height: auto;" /&gt;&lt;/a&gt;</p>
]]></description><link>https://multitool.ninja/post/1387361</link><guid isPermaLink="true">https://multitool.ninja/post/1387361</guid><dc:creator><![CDATA[crambie]]></dc:creator><pubDate>Wed, 30 Nov 2016 15:39:10 GMT</pubDate></item><item><title><![CDATA[Reply to Polyclay & Resin Scale on Wed, 30 Nov 2016 15:29:41 GMT]]></title><description><![CDATA[<p dir="auto">Looks flippin' amazing Crambie  -beautiful work  <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1387344</link><guid isPermaLink="true">https://multitool.ninja/post/1387344</guid><dc:creator><![CDATA[magentus]]></dc:creator><pubDate>Wed, 30 Nov 2016 15:29:41 GMT</pubDate></item><item><title><![CDATA[Reply to Polyclay & Resin Scale on Wed, 30 Nov 2016 15:19:57 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/crambie" aria-label="Profile: crambie">@<bdi>crambie</bdi></a> <a href="/post/1387254">said</a>:<br />
Still not sure, keep being tempted to start over, Same basic layout just with more detail. Probably won't but possibly might. Added a tiny snail, made half a dozen but he's the only one I didn't break. Will have to do some more.</p>
<p dir="auto">&lt;a href="<a href="https://flic.kr/p/NvxryK" rel="nofollow ugc">https://flic.kr/p/NvxryK</a>" target="_blank" rel="noopener noreferrer"&gt;&lt;img src="<a href="https://c8.staticflickr.com/6/5447/30526724183_dda7d3c473_c.jpg" rel="nofollow ugc">https://c8.staticflickr.com/6/5447/30526724183_dda7d3c473_c.jpg</a>" alt="banner" style="max-width: 100%; height: auto;" /&gt;&lt;/a&gt;</p>
</blockquote>
<p dir="auto">Not that I'm any expert, but I think it looks really cool. <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /> I'd love to see more of a side shot, if you don't mind. Great work! <img src="/assets/uploads/smileys/like-sign.gif" alt=":like:" title="I like this" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1387330</link><guid isPermaLink="true">https://multitool.ninja/post/1387330</guid><dc:creator><![CDATA[metasyntax]]></dc:creator><pubDate>Wed, 30 Nov 2016 15:19:57 GMT</pubDate></item><item><title><![CDATA[Reply to Polyclay & Resin Scale on Wed, 30 Nov 2016 12:41:44 GMT]]></title><description><![CDATA[<p dir="auto">Still not sure, keep being tempted to start over, Same basic layout just with more detail. Probably won't but possibly might. Added a tiny snail, made half a dozen but he's the only one I didn't break. Will have to do some more.</p>
<p dir="auto">&lt;a href="<a href="https://flic.kr/p/NvxryK" rel="nofollow ugc">https://flic.kr/p/NvxryK</a>" target="_blank" rel="noopener noreferrer"&gt;&lt;img src="<a href="https://c8.staticflickr.com/6/5447/30526724183_dda7d3c473_c.jpg" rel="nofollow ugc">https://c8.staticflickr.com/6/5447/30526724183_dda7d3c473_c.jpg</a>" alt="banner" style="max-width: 100%; height: auto;" /&gt;&lt;/a&gt;</p>
]]></description><link>https://multitool.ninja/post/1387254</link><guid isPermaLink="true">https://multitool.ninja/post/1387254</guid><dc:creator><![CDATA[crambie]]></dc:creator><pubDate>Wed, 30 Nov 2016 12:41:44 GMT</pubDate></item><item><title><![CDATA[Reply to Polyclay & Resin Scale on Tue, 29 Nov 2016 17:29:55 GMT]]></title><description><![CDATA[<p dir="auto">This is absolutely incredible  <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /> I can't wait to see the end result. Amazing work  <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1386807</link><guid isPermaLink="true">https://multitool.ninja/post/1386807</guid><dc:creator><![CDATA[thebullfrog]]></dc:creator><pubDate>Tue, 29 Nov 2016 17:29:55 GMT</pubDate></item><item><title><![CDATA[Reply to Polyclay & Resin Scale on Wed, 23 Nov 2016 14:04:58 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/crambie" aria-label="Profile: crambie">@<bdi>crambie</bdi></a> <a href="/post/1383495">said</a>:<br />
It's slow going, just do it the odd evening, and as you know time flies and you think is that all I've done? Still not sure if it will look any good but either way it's fun and good practice.</p>
</blockquote>
<p dir="auto">Untill you're eventualy finished and are bored to death in the evenings, thinking back about this project that made you forget about the world, every time you worked on it :D</p>
]]></description><link>https://multitool.ninja/post/1383520</link><guid isPermaLink="true">https://multitool.ninja/post/1383520</guid><dc:creator><![CDATA[Mechanickal]]></dc:creator><pubDate>Wed, 23 Nov 2016 14:04:58 GMT</pubDate></item><item><title><![CDATA[Reply to Polyclay & Resin Scale on Wed, 23 Nov 2016 13:06:20 GMT]]></title><description><![CDATA[<p dir="auto">It's slow going, just do it the odd evening, and as you know time flies and you think is that all I've done? Still not sure if it will look any good but either way it's fun and good practice.</p>
]]></description><link>https://multitool.ninja/post/1383495</link><guid isPermaLink="true">https://multitool.ninja/post/1383495</guid><dc:creator><![CDATA[crambie]]></dc:creator><pubDate>Wed, 23 Nov 2016 13:06:20 GMT</pubDate></item><item><title><![CDATA[Reply to Polyclay & Resin Scale on Wed, 23 Nov 2016 12:59:54 GMT]]></title><description><![CDATA[<p dir="auto">Oh wow! This is amazing. I've done some things with polymer clay like jewellery and also used resin in the past but I've never thought about putting them together. I don't think I'd have the patience to do things that small either.</p>
<p dir="auto">Really enjoying this thread, looking forward to seeing more.<br />
Danielle.</p>
]]></description><link>https://multitool.ninja/post/1383490</link><guid isPermaLink="true">https://multitool.ninja/post/1383490</guid><dc:creator><![CDATA[Damsel]]></dc:creator><pubDate>Wed, 23 Nov 2016 12:59:54 GMT</pubDate></item><item><title><![CDATA[Reply to Polyclay & Resin Scale on Wed, 23 Nov 2016 12:29:40 GMT]]></title><description><![CDATA[<p dir="auto">Slowly filling it in.<br />
&lt;a href="<a href="https://flic.kr/p/NibnTx" rel="nofollow ugc">https://flic.kr/p/NibnTx</a>" target="_blank" rel="noopener noreferrer"&gt;&lt;img src="<a href="https://c2.staticflickr.com/6/5532/30386816513_ec4feb2f6d_c.jpg" rel="nofollow ugc">https://c2.staticflickr.com/6/5532/30386816513_ec4feb2f6d_c.jpg</a>" alt="banner" style="max-width: 100%; height: auto;" /&gt;&lt;/a&gt;</p>
]]></description><link>https://multitool.ninja/post/1383480</link><guid isPermaLink="true">https://multitool.ninja/post/1383480</guid><dc:creator><![CDATA[crambie]]></dc:creator><pubDate>Wed, 23 Nov 2016 12:29:40 GMT</pubDate></item><item><title><![CDATA[Reply to Polyclay & Resin Scale on Mon, 21 Nov 2016 09:54:24 GMT]]></title><description><![CDATA[<p dir="auto">Colour me <strong>deeply impressed</strong> <img src="/assets/uploads/smileys/like-sign.gif" alt=":like:" title="I like this" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1382267</link><guid isPermaLink="true">https://multitool.ninja/post/1382267</guid><dc:creator><![CDATA[gregozedobe]]></dc:creator><pubDate>Mon, 21 Nov 2016 09:54:24 GMT</pubDate></item><item><title><![CDATA[Reply to Polyclay & Resin Scale on Mon, 21 Nov 2016 00:21:18 GMT]]></title><description><![CDATA[<p dir="auto">Allow me to say, this is simply awesome. In the origional meaning. I am filled with awe by this work. I would go rather utterly bonkers trying to do this.</p>
]]></description><link>https://multitool.ninja/post/1382093</link><guid isPermaLink="true">https://multitool.ninja/post/1382093</guid><dc:creator><![CDATA[ironraven]]></dc:creator><pubDate>Mon, 21 Nov 2016 00:21:18 GMT</pubDate></item><item><title><![CDATA[Reply to Polyclay & Resin Scale on Sun, 20 Nov 2016 20:57:54 GMT]]></title><description><![CDATA[<p dir="auto">It's keeping me amused, something different. Just got the pieces together for a different artsy scale, ebony, gold, silver, diamonds, sapphire, opal, mother of pearl and some other bits. But will be a joint project with my brother when he has time.</p>
]]></description><link>https://multitool.ninja/post/1381980</link><guid isPermaLink="true">https://multitool.ninja/post/1381980</guid><dc:creator><![CDATA[crambie]]></dc:creator><pubDate>Sun, 20 Nov 2016 20:57:54 GMT</pubDate></item><item><title><![CDATA[Reply to Polyclay & Resin Scale on Sun, 20 Nov 2016 20:34:28 GMT]]></title><description><![CDATA[<p dir="auto">Nice to see something different like this. It has the potential to look really beautiful and anything that makes knives visibly less threatening gets my vote.</p>
]]></description><link>https://multitool.ninja/post/1381973</link><guid isPermaLink="true">https://multitool.ninja/post/1381973</guid><dc:creator><![CDATA[lemo]]></dc:creator><pubDate>Sun, 20 Nov 2016 20:34:28 GMT</pubDate></item><item><title><![CDATA[Reply to Polyclay & Resin Scale on Fri, 18 Nov 2016 19:27:47 GMT]]></title><description><![CDATA[<p dir="auto">Missed this one and glad I found it now :o Very cool work you have there <img src="/assets/uploads/smileys/like-sign.gif" alt=":like:" title="I like this" class="forum-smiley emoji" /> Can't wait to see final product  <img src="/assets/uploads/smileys/like-sign.gif" alt=":like:" title="I like this" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1381070</link><guid isPermaLink="true">https://multitool.ninja/post/1381070</guid><dc:creator><![CDATA[Poncho65]]></dc:creator><pubDate>Fri, 18 Nov 2016 19:27:47 GMT</pubDate></item><item><title><![CDATA[Reply to Polyclay & Resin Scale on Fri, 18 Nov 2016 15:05:50 GMT]]></title><description><![CDATA[<p dir="auto">This is a really neat project!  <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /></p>
<p dir="auto">Exciting to see how it's going.</p>
]]></description><link>https://multitool.ninja/post/1380906</link><guid isPermaLink="true">https://multitool.ninja/post/1380906</guid><dc:creator><![CDATA[Steinar]]></dc:creator><pubDate>Fri, 18 Nov 2016 15:05:50 GMT</pubDate></item><item><title><![CDATA[Reply to Polyclay & Resin Scale on Fri, 18 Nov 2016 15:00:10 GMT]]></title><description><![CDATA[<p dir="auto">Not had much time this week but this is where I've got to so far.</p>
<p dir="auto">&lt;a href="<a href="https://flic.kr/p/Pc3YAk" rel="nofollow ugc">https://flic.kr/p/Pc3YAk</a>" target="_blank" rel="noopener noreferrer"&gt;&lt;img src="<a href="https://c8.staticflickr.com/6/5604/30973830151_fcd4efa481_c.jpg" rel="nofollow ugc">https://c8.staticflickr.com/6/5604/30973830151_fcd4efa481_c.jpg</a>" alt="banner" style="max-width: 100%; height: auto;" /&gt;&lt;/a&gt;</p>
]]></description><link>https://multitool.ninja/post/1380899</link><guid isPermaLink="true">https://multitool.ninja/post/1380899</guid><dc:creator><![CDATA[crambie]]></dc:creator><pubDate>Fri, 18 Nov 2016 15:00:10 GMT</pubDate></item><item><title><![CDATA[Reply to Polyclay & Resin Scale on Sat, 29 Oct 2016 13:07:02 GMT]]></title><description><![CDATA[<p dir="auto">These are fantastic works of art, really looking forward to seeing the final result.</p>
]]></description><link>https://multitool.ninja/post/1369531</link><guid isPermaLink="true">https://multitool.ninja/post/1369531</guid><dc:creator><![CDATA[shibafu]]></dc:creator><pubDate>Sat, 29 Oct 2016 13:07:02 GMT</pubDate></item><item><title><![CDATA[Reply to Polyclay & Resin Scale on Thu, 27 Oct 2016 10:23:24 GMT]]></title><description><![CDATA[<p dir="auto">Never used it, so far just had a read and seen some videos. Seems most don't bother with de-gassing perhaps for tiny things like jewellery it's not so important? Also need to make the plug (think that's the right word) and then the silicone mold.</p>
<p dir="auto">The idea will be to do the resin in layers, so the fish are floating not on the bottom or stuck to something. Can't say I'm really looking forward to the mold/resin part.</p>
]]></description><link>https://multitool.ninja/post/1368528</link><guid isPermaLink="true">https://multitool.ninja/post/1368528</guid><dc:creator><![CDATA[crambie]]></dc:creator><pubDate>Thu, 27 Oct 2016 10:23:24 GMT</pubDate></item><item><title><![CDATA[Reply to Polyclay & Resin Scale on Thu, 27 Oct 2016 10:14:09 GMT]]></title><description><![CDATA[<p dir="auto">Good stuff:</p>
<p dir="auto">I dunno how much experience you have with resins, so I apologize in advance if my ramblings are redundant.<br />
I'd err on the side of caution and get some slow-setting resins to experiment with.<br />
For optimum bubble free resin pours you need to de-gas the resin mixture prior to pouring. The only way to do this consistently is using a by vacuum pot.<br />
Makeshift ones can be made using an old cast Iron pot, some plumbing supplies and a vacuum cleaner.<br />
-T</p>
]]></description><link>https://multitool.ninja/post/1368524</link><guid isPermaLink="true">https://multitool.ninja/post/1368524</guid><dc:creator><![CDATA[T14]]></dc:creator><pubDate>Thu, 27 Oct 2016 10:14:09 GMT</pubDate></item></channel></rss>