<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0"><channel><title><![CDATA[leatherman bit extender question]]></title><description><![CDATA[<p dir="auto">got a new Wave and the bit extender for Christmas.  So after playing with it for awhile, I'm thinking, didn't I read somewhere that it'll take (the extender) regular 1/4" bits as well?.........and so I pop one in and. it goes way in past the little retainer ring and gets stuck.  Won't come out even with a 4" vice grips on it.  So I take it out to my little shop and put the extender in the vice, and put a bigger vice grips on the bit, but nothin' doin'.  Eventually, I manage to snap off the tip of the bit, which happened to be a very small phillips, and so now there's nothing to grab onto.  Last resort, I use a utility knife and successfully  remove the retainer ring, and the bit comes right out.  Got it back in and so it works fine again, although I won't be trying any regular 1/4" bits in the near future.  I still thought I read where they'd work, but I guess not.  Any thoughts on my near disaster?  thanks, and Merry Christmas to all.</p>
]]></description><link>https://multitool.ninja/topic/69972/leatherman-bit-extender-question</link><generator>RSS for Node</generator><lastBuildDate>Wed, 18 Nov 2026 22:58:59 GMT</lastBuildDate><atom:link href="https://multitool.ninja/topic/69972.rss" rel="self" type="application/rss+xml"/><pubDate>Sun, 25 Dec 2016 18:00:04 GMT</pubDate><ttl>60</ttl><item><title><![CDATA[Reply to leatherman bit extender question on Mon, 26 Dec 2016 13:23:03 GMT]]></title><description><![CDATA[<p dir="auto">It does work with regular bits, but they go in deep like you experienced. Yours must be a bit stiffer than mine because I can get bits out usually by giving them a wiggle.  A cheap way to stop them sitting low is to pop a rubber or cardboard disc in the bottom ( or something similar). Alternatively if you don't want to do that you can just buy a long bit bit set.</p>
]]></description><link>https://multitool.ninja/post/1401890</link><guid isPermaLink="true">https://multitool.ninja/post/1401890</guid><dc:creator><![CDATA[Kev D]]></dc:creator><pubDate>Mon, 26 Dec 2016 13:23:03 GMT</pubDate></item><item><title><![CDATA[Reply to leatherman bit extender question on Sun, 25 Dec 2016 18:49:59 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/tonyg" aria-label="Profile: tonyg">@<bdi>tonyg</bdi></a> <a href="/post/1401575">said</a>:<br />
got a new Wave and the bit extender for Christmas.  So after playing with it for awhile, I'm thinking, didn't I read somewhere that it'll take regular 1/4" bits as well?.........and so I pop one in and. it goes way in past the little retainer ring and gets stuck.  Won't come out even with a 4" vice grips on it.  So I take it out to my little shop and put the extender in the vice, and put a bigger vice grips on the bit, but nothin' doin'.  Eventually, I manage to snap off the tip of the bit, which happened to be a very small phillips, and so now there's nothing to grab onto.  Last resort, I use a utility knife and successfully  remove the retainer ring, and the bit comes right out.  Got it back in and so it works fine again, although I won't be trying any regular 1/4" bits in the near future.  I still thought I read where they'd work, but I guess not.  Any thoughts on my near disaster?  thanks, and Merry Christmas to all.</p>
</blockquote>
<p dir="auto">It does say that it works with all standard 1/4 inch bits. Here is screenshot from their website.  Contact them you may have a defective spring clip.  Maybe try a different 1/4 bit,  maybe it is your bit???<br />
<img src="http://uploads.tapatalk-cdn.com/20161225/62a3d6b1aa3fe6f0787881a50bce84e4.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Sent from my SM-G935P using Tapatalk</p>
]]></description><link>https://multitool.ninja/post/1401588</link><guid isPermaLink="true">https://multitool.ninja/post/1401588</guid><dc:creator><![CDATA[yourbadneighbor]]></dc:creator><pubDate>Sun, 25 Dec 2016 18:49:59 GMT</pubDate></item></channel></rss>