<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0"><channel><title><![CDATA[Braided wire cutting.]]></title><description><![CDATA[<p dir="auto">I was browsing the forum the other night, nothing recent took my eye so looked further afield.<br />
Found a thread on cutting braided wire (brake cable). It just so happened that at work I had been using SS braided cable on speSmurfpillst items intended for London Underground.</p>
<p dir="auto">The pliers at work are pretty crap  no name jobbies. Yet they snipped through the cable with somewhat ease, which surprised me no end. I decided to bring all the small offcuts home to test on mine.</p>
<p dir="auto">My cheap Hilka go to pair that resides in a small wooden tool box under the stairs, I actually custom built the box to fit on the shelf and to hold no more than a dozen or so needed tools, 4way screwdriver, tape measure, small hammer, PLIERS etc.</p>
<p dir="auto">Well, mine just crushed it...peeved I went into the garage to get my "proper" pair (Stanley) cut straight through with a gratifying clean cut and a wonderfully reassuring noise whilst doing so.</p>
<p dir="auto">My Bahco Cable cutters with special designed pivoted head couldn't get through!!... This I couldn't believe!!</p>
<p dir="auto">"Okay, time for more tests"</p>
<p dir="auto">Went upstairs and opened the LM storage box..... You know, I think LM need to go back to the drawing board!! Not a single model of theirs had the ability to cut through braided cable, Not even their EOD MUT!! laughable, unless ofcourse you are a soldier and suddenly find yourself in a situation where you need to cut braided cable...Tip, By a cheap stanley pair at less than a tenth or read on and possibly save a life if not your own!</p>
<p dir="auto">Tested the SOGs...crushed it<br />
The Schrades...crushed it<br />
Wenger Ranger folding pliers..crushed it</p>
<p dir="auto">...as I type I've just heard a bang near the front door....Yes it's the Signal I bought used. The seller said it as like new, just checked the cutter.....pristine...just tried the cable test...</p>
<p dir="auto">.....Part Cut, part Crushed it!!  Leatherman, you gotta be smurfting me!!</p>
<p dir="auto">Wait, I'm gonna go test the Gerbers MP 600 series</p>
<p dir="auto">Well, Well this is an eye opener.<br />
The Model with Carbide Cutters  crushed it without severing any strands, the model Without Carbide Cutters, cut straight through...every time.</p>
<p dir="auto">The Victorinox Spirit crushed it. This surprised me too, as not only are my Spirits new they also fared better in similar braided wire tests here on the forum. The mighty Swisstool also surprised me...cut straight though.</p>
<p dir="auto">Make of this what you will, but I think it confirms to me that leatherman are just a joke. Oh' tested the OHT too....crushed it, surge crushed it, ST300 crushed it Wave crushed it, Juice crushed it.....Yawn! a pattern is beginning to emerge!</p>
]]></description><link>https://multitool.ninja/topic/72934/braided-wire-cutting</link><generator>RSS for Node</generator><lastBuildDate>Wed, 18 Nov 2026 17:02:38 GMT</lastBuildDate><atom:link href="https://multitool.ninja/topic/72934.rss" rel="self" type="application/rss+xml"/><pubDate>Sat, 15 Jul 2017 09:14:34 GMT</pubDate><ttl>60</ttl><item><title><![CDATA[Reply to Braided wire cutting. on Thu, 03 Aug 2017 02:39:38 GMT]]></title><description><![CDATA[<p dir="auto">$90 is about the most I've paid as well. I consider that expensive too. A 2018 Mercedes-Benz GLS450 starts at $69,550USD. I consider that expensive too. But I don't have to buy either of those products, do I?</p>
]]></description><link>https://multitool.ninja/post/1530582</link><guid isPermaLink="true">https://multitool.ninja/post/1530582</guid><dc:creator><![CDATA[aluminated]]></dc:creator><pubDate>Thu, 03 Aug 2017 02:39:38 GMT</pubDate></item><item><title><![CDATA[Reply to Braided wire cutting. on Thu, 03 Aug 2017 00:07:16 GMT]]></title><description><![CDATA[<p dir="auto">A Surge retails here for about $250NZD. I bought my Surge from the US for $120NZD including postage, and at that time they were well over $300NZD in store here.</p>
<p dir="auto">$120NZD is about $90USD at the moment (I can't remember what it was 3 years ago) and I still consider that expensive.</p>
]]></description><link>https://multitool.ninja/post/1530530</link><guid isPermaLink="true">https://multitool.ninja/post/1530530</guid><dc:creator><![CDATA[Syncop8r]]></dc:creator><pubDate>Thu, 03 Aug 2017 00:07:16 GMT</pubDate></item><item><title><![CDATA[Reply to Braided wire cutting. on Wed, 02 Aug 2017 23:46:54 GMT]]></title><description><![CDATA[<p dir="auto">I cut the wire in my test with four different LM tools, including the one I had in my pocket that I needed to use at the hardware store to cut the cables off the spools.<br />
Three of those tools each cost less than $50 since I don't buy new.<br />
One came from Pearl Harbor in Hawaii. Another shipped from Naval Station Rota in Cádiz, Spain. I'm an ocean away from one and an ocean and a continent away from the other. I just don't understand the price complaints.</p>
]]></description><link>https://multitool.ninja/post/1530525</link><guid isPermaLink="true">https://multitool.ninja/post/1530525</guid><dc:creator><![CDATA[aluminated]]></dc:creator><pubDate>Wed, 02 Aug 2017 23:46:54 GMT</pubDate></item><item><title><![CDATA[Reply to Braided wire cutting. on Wed, 02 Aug 2017 21:16:56 GMT]]></title><description><![CDATA[<p dir="auto">Well said pomsbz.</p>
<p dir="auto">A big part of all this is that decent multitools retail for ridiculous amounts in some places. The ones in the shops here cost <strong>three times</strong> more than what I managed to buy mine online (shipped from US) for. So we expect a lot if we pay full retail. In fact what I paid even seems too much.</p>
]]></description><link>https://multitool.ninja/post/1530472</link><guid isPermaLink="true">https://multitool.ninja/post/1530472</guid><dc:creator><![CDATA[Syncop8r]]></dc:creator><pubDate>Wed, 02 Aug 2017 21:16:56 GMT</pubDate></item><item><title><![CDATA[Reply to Braided wire cutting. on Wed, 02 Aug 2017 21:06:20 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/pomsbz" aria-label="Profile: pomsbz">@<bdi>pomsbz</bdi></a> <a href="/post/1530392">said</a>:<br />
I've been thinking this through. A multitool is a collection of compromises. I don't consider a single tool on my Charge AL to be optimal for its intended task. Not one. But. I cannot carry an even slimmed down set of 'non compromised' tools without it being over 3 times the bulk (pliers/cutters/file/screwdriver). So every time I use my Charge I wish I had the proper tool in my hand. But every time I'm using the Charge it's because I don't and wouldn't have had that tool to hand. Because they don't fit in my bag or would not be in my pocket.</p>
</blockquote>
<p dir="auto">Agreed.  <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /> A multi-tool is basically a trade off between the capabilities of speSmurfpillsts tools versus the portability of the jack-of-all-trades. And often it makes sense to pay extra for that capable portable package.</p>
<p dir="auto">One qualifier though: The compromise must be still be good enough to do the job. If not the multi-tool is effectively worse then nothing as you think you have a tool for the task, but instead it turns out you have just been carrying a dead weight. To me it seems that is often the difference between a good and bad multi-tool, and that difference is worth paying for.</p>
]]></description><link>https://multitool.ninja/post/1530471</link><guid isPermaLink="true">https://multitool.ninja/post/1530471</guid><dc:creator><![CDATA[Vidar]]></dc:creator><pubDate>Wed, 02 Aug 2017 21:06:20 GMT</pubDate></item><item><title><![CDATA[Reply to Braided wire cutting. on Wed, 02 Aug 2017 18:23:18 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/tosh" aria-label="Profile: tosh">@<bdi>tosh</bdi></a> <a href="/post/1517117">said</a>:</p>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/pomsbz" aria-label="Profile: pomsbz">@<bdi>pomsbz</bdi></a> <a href="/post/1516729">said</a>:</p>
<blockquote>
<p dir="auto">I've been annoyed about this for a while, specifically with bike brake cables. It would have been really nice if a MT like my Charge could do this simple task. Trying it with a Skeletool ruined the wire cutters, dented them badly.</p>
<p dir="auto">As for the cost vs features, not sure. You could say the same about the scissors deficiencies. Or the file. Etc, etc.We're paying for a whole bunch of tool compromises put together into a single streamlined package. We're paying for the combination not the tools if that makes sense. Could be better tool design choices inside that combination and it could be cheaper.** I fully agree. Especially at the Leatherman price points. Not being a USA citizen it does become tedious to pay a premium markup for US build which I do not particularly find reflected in the actual item quality itself, at least not to the extent the price markup might suggest**. Referring to my experience in general rather than Leatherman specifically.</p>
</blockquote>
<p dir="auto">Exactly so, almost choked on my lunch earlier...decided to check what amazon are listing the MUT for  <img src="/assets/uploads/smileys/facepalm.gif" alt=":facepalm:" title="Facepalm" class="forum-smiley emoji" /><br />
£210 bloody quid!!  <img src="/assets/uploads/smileys/rant.gif" alt=":rant:" title="rant!" class="forum-smiley emoji" /></p>
<p dir="auto"><a href="https://www.amazon.co.uk/d/Multitools-Accessories/LEATHERMAN-MUT-black-Multitool-with-case/B004Q9TKCA/ref=sr_1_2?ie=UTF8&amp;qid=1500501567&amp;sr=8-2&amp;keywords=leatherman+mut" rel="nofollow ugc">https://www.amazon.co.uk/d/Multitools-Accessories/LEATHERMAN-MUT-black-Multitool-with-case/B004Q9TKCA/ref=sr_1_2?ie=UTF8&amp;qid=1500501567&amp;sr=8-2&amp;keywords=leatherman+mut</a></p>
<p dir="auto">An' it don't cut smurfe!!!</p>
</blockquote>
<p dir="auto">I've been thinking this through. A multitool is a collection of compromises. I don't consider a single tool on my Charge AL to be optimal for its intended task. Not one. But. I cannot carry an even slimmed down set of 'non compromised' tools without it being over 3 times the bulk (pliers/cutters/file/screwdriver). So every time I use my Charge I wish I had the proper tool in my hand. But every time I'm using the Charge it's because I don't and wouldn't have had that tool to hand. Because they don't fit in my bag or would not be in my pocket.</p>
<p dir="auto">That said I believe you mentioned that in the plier cutting test the Victorinox tested far better cutting cable. They also seem to be significantly cheaper. Perhaps that might be a solution for you? Sell out of Leatherman and move to Victorinox. If it works for you, why not?  Given the pricing in the UK you should break even. For me the Victorinox had its own set of compromises which didn't fit my needs. Namely OHO blade and no bit driver slot built in.</p>
<p dir="auto">I'm a photographer. They make zoom lenses which allow you lots of different types of view from a given stand point. The more zoom you get the more you pay usually. The non zoom lenses, even the ones costing 80 quid, will easily outperform the vast majority of these zoom lenses. Even the ones costing a grand. But they can't do all the other stuff. I have a fancy that in whatever field of engineering, whether tools or electronics, you pay more for compromise if that compromise spans more capability than the speSmurfpillst item.</p>
<p dir="auto">Whether that compromise is worth the cost is usually dependant on the users specific needs and what the competition is offering. Competition is incredibly valuable. Without it innovation stagnates, prices rise and QC drops.</p>
]]></description><link>https://multitool.ninja/post/1530392</link><guid isPermaLink="true">https://multitool.ninja/post/1530392</guid><dc:creator><![CDATA[pomsbz]]></dc:creator><pubDate>Wed, 02 Aug 2017 18:23:18 GMT</pubDate></item><item><title><![CDATA[Reply to Braided wire cutting. on Wed, 19 Jul 2017 22:01:27 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/pomsbz" aria-label="Profile: pomsbz">@<bdi>pomsbz</bdi></a> <a href="/post/1516729">said</a>:<br />
I've been annoyed about this for a while, specifically with bike brake cables. It would have been really nice if a MT like my Charge could do this simple task. Trying it with a Skeletool ruined the wire cutters, dented them badly.</p>
<p dir="auto">As for the cost vs features, not sure. You could say the same about the scissors deficiencies. Or the file. Etc, etc.We're paying for a whole bunch of tool compromises put together into a single streamlined package. We're paying for the combination not the tools if that makes sense. Could be better tool design choices inside that combination and it could be cheaper.** I fully agree. Especially at the Leatherman price points. Not being a USA citizen it does become tedious to pay a premium markup for US build which I do not particularly find reflected in the actual item quality itself, at least not to the extent the price markup might suggest**. Referring to my experience in general rather than Leatherman specifically.</p>
</blockquote>
<p dir="auto">Exactly so, almost choked on my lunch earlier...decided to check what amazon are listing the MUT for  <img src="/assets/uploads/smileys/facepalm.gif" alt=":facepalm:" title="Facepalm" class="forum-smiley emoji" /><br />
£210 bloody quid!!  <img src="/assets/uploads/smileys/rant.gif" alt=":rant:" title="rant!" class="forum-smiley emoji" /></p>
<p dir="auto"><a href="https://www.amazon.co.uk/d/Multitools-Accessories/LEATHERMAN-MUT-black-Multitool-with-case/B004Q9TKCA/ref=sr_1_2?ie=UTF8&amp;qid=1500501567&amp;sr=8-2&amp;keywords=leatherman+mut" rel="nofollow ugc">https://www.amazon.co.uk/d/Multitools-Accessories/LEATHERMAN-MUT-black-Multitool-with-case/B004Q9TKCA/ref=sr_1_2?ie=UTF8&amp;qid=1500501567&amp;sr=8-2&amp;keywords=leatherman+mut</a></p>
<p dir="auto">An' it don't cut smurfe!!!</p>
]]></description><link>https://multitool.ninja/post/1517117</link><guid isPermaLink="true">https://multitool.ninja/post/1517117</guid><dc:creator><![CDATA[tosh]]></dc:creator><pubDate>Wed, 19 Jul 2017 22:01:27 GMT</pubDate></item><item><title><![CDATA[Reply to Braided wire cutting. on Wed, 19 Jul 2017 15:40:52 GMT]]></title><description><![CDATA[<p dir="auto">I've done the tests, but as it turned out to be fairly comprehensive I put them in their own thread - "plier cutting test" - or something like that.</p>
]]></description><link>https://multitool.ninja/post/1516919</link><guid isPermaLink="true">https://multitool.ninja/post/1516919</guid><dc:creator><![CDATA[Vidar]]></dc:creator><pubDate>Wed, 19 Jul 2017 15:40:52 GMT</pubDate></item><item><title><![CDATA[Reply to Braided wire cutting. on Wed, 19 Jul 2017 07:48:54 GMT]]></title><description><![CDATA[<p dir="auto">I've been annoyed about this for a while, specifically with bike brake cables. It would have been really nice if a MT like my Charge could do this simple task. Trying it with a Skeletool ruined the wire cutters, dented them badly.</p>
<p dir="auto">As for the cost vs features, not sure. You could say the same about the scissors deficiencies. Or the file. Etc, etc.We're paying for a whole bunch of tool compromises put together into a single streamlined package. We're paying for the combination not the tools if that makes sense. Could be better tool design choices inside that combination and it could be cheaper. I fully agree. Especially at the Leatherman price points. Not being a USA citizen it does become tedious to pay a premium markup for US build which I do not particularly find reflected in the actual item quality itself, at least not to the extent the price markup might suggest. Referring to my experience in general rather than Leatherman specifically.</p>
]]></description><link>https://multitool.ninja/post/1516729</link><guid isPermaLink="true">https://multitool.ninja/post/1516729</guid><dc:creator><![CDATA[pomsbz]]></dc:creator><pubDate>Wed, 19 Jul 2017 07:48:54 GMT</pubDate></item><item><title><![CDATA[Reply to Braided wire cutting. on Wed, 19 Jul 2017 04:07:21 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/vidar" aria-label="Profile: Vidar">@<bdi>Vidar</bdi></a> <a href="/post/1516669">said</a>:<br />
Hit the bottle with that thing and it should be open..?  :D</p>
</blockquote>
<p dir="auto">Ha! I KNEW somebody would think of that (I didn't) as soon as I posted the question.<br />
Kudos!</p>
]]></description><link>https://multitool.ninja/post/1516672</link><guid isPermaLink="true">https://multitool.ninja/post/1516672</guid><dc:creator><![CDATA[aluminated]]></dc:creator><pubDate>Wed, 19 Jul 2017 04:07:21 GMT</pubDate></item><item><title><![CDATA[Reply to Braided wire cutting. on Wed, 19 Jul 2017 04:00:59 GMT]]></title><description><![CDATA[<p dir="auto">Hit the bottle with that thing and it should be open..?  :D</p>
]]></description><link>https://multitool.ninja/post/1516669</link><guid isPermaLink="true">https://multitool.ninja/post/1516669</guid><dc:creator><![CDATA[Vidar]]></dc:creator><pubDate>Wed, 19 Jul 2017 04:00:59 GMT</pubDate></item><item><title><![CDATA[Reply to Braided wire cutting. on Wed, 19 Jul 2017 03:54:54 GMT]]></title><description><![CDATA[<p dir="auto">Yeah, but where is the bottle opener?!?</p>
]]></description><link>https://multitool.ninja/post/1516663</link><guid isPermaLink="true">https://multitool.ninja/post/1516663</guid><dc:creator><![CDATA[aluminated]]></dc:creator><pubDate>Wed, 19 Jul 2017 03:54:54 GMT</pubDate></item><item><title><![CDATA[Reply to Braided wire cutting. on Wed, 19 Jul 2017 03:44:13 GMT]]></title><description><![CDATA[<p dir="auto">I have a pair of Klein cable cutters, use them for heavy gauge stranded electrical wire. I'm not sure how thick those brake cables are, but these would most likely do the trick. I will post a pic tomorrow, in the mean time here is a stock pic of the tool:</p>
<p dir="auto"><img src="http://www.kleintools.com/sites/all/product_assets/catalog_imagery/klein/63050.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="https://forum.multitool.org/index.php?action=dlattach;topic=73007.0;attach=327510" alt="" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/1516658</link><guid isPermaLink="true">https://multitool.ninja/post/1516658</guid><dc:creator><![CDATA[Blackbeard]]></dc:creator><pubDate>Wed, 19 Jul 2017 03:44:13 GMT</pubDate></item><item><title><![CDATA[Reply to Braided wire cutting. on Wed, 19 Jul 2017 01:30:45 GMT]]></title><description><![CDATA[<p dir="auto">The rubbish Leatherman Super Tool 300 cutting 1/16" (1.6mm) braided wire, both uncoated and nylon coated.<br />
<a href="https://youtu.be/Dh_d-H-USoo" rel="nofollow ugc">https://youtu.be/Dh_d-H-USoo</a><br />
The rubbish Leatherman Rebar cut so well on occasion that it shot some wire sections across the vanity even without a dedicated stranded wire cutter.</p>
]]></description><link>https://multitool.ninja/post/1516633</link><guid isPermaLink="true">https://multitool.ninja/post/1516633</guid><dc:creator><![CDATA[aluminated]]></dc:creator><pubDate>Wed, 19 Jul 2017 01:30:45 GMT</pubDate></item><item><title><![CDATA[Reply to Braided wire cutting. on Tue, 18 Jul 2017 17:41:44 GMT]]></title><description><![CDATA[<p dir="auto">I have been on an laborious expedition. I climbed, jumped a few low obstacles, and ducked once, before I indeed located the well preserved remains of a last century lawn mover. As luck would have it there was a note next to the carcass stating that it would donate any useble organs or  parts to worthy causes like machinery in need, science or bizarre experiments.</p>
<p dir="auto">I chose a control wire of galvanized steel. That seemed like a normal non-industrial everyday thing to cut and repair. I've lined up some pliers and a selection of multi-tools for testing. It is raining heavily outside right now though, so I plan to wait that out as I don't want to fill any inside areas with lots of tiny metal splinters. (Although I'm sure I would clean them out over time by getting them stuck in my feet and hands...  Where is that magnetic cleaner when I could actually use one? I can feel another expedition coming up at some point).</p>
<p dir="auto">What I can say already though is that a Knipex bolt end cutting plier cuts such a wire with great ease indeed. So easy in fact that I'm surprised if any other plier fails - actually I might even try some tough scissors just for the smurf of it.</p>
]]></description><link>https://multitool.ninja/post/1516334</link><guid isPermaLink="true">https://multitool.ninja/post/1516334</guid><dc:creator><![CDATA[Vidar]]></dc:creator><pubDate>Tue, 18 Jul 2017 17:41:44 GMT</pubDate></item><item><title><![CDATA[Reply to Braided wire cutting. on Tue, 18 Jul 2017 16:34:48 GMT]]></title><description><![CDATA[<p dir="auto">Removed - duplicate reply</p>
]]></description><link>https://multitool.ninja/post/1516187</link><guid isPermaLink="true">https://multitool.ninja/post/1516187</guid><dc:creator><![CDATA[tosh]]></dc:creator><pubDate>Tue, 18 Jul 2017 16:34:48 GMT</pubDate></item><item><title><![CDATA[Reply to Braided wire cutting. on Tue, 18 Jul 2017 14:08:48 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/vidar" aria-label="Profile: Vidar">@<bdi>Vidar</bdi></a> <a href="/post/1516174">said</a>:<br />
I actually tried looking for some bicycle or lawnmover control wire to try varius pliers. Those sized wires seem quite appropriate for normal daily life tasks, and should reasonably be within expected range of a good plier?</p>
<p dir="auto">Typically though, when you need something it is nowhere to be found. When you don't it is in your face wherever you go.</p>
<p dir="auto">(I'm planning to mount an expedition later to some uncharted territories not frequented by man since last millenium. There are rumours among the natives that sound like sightings of an old lawnmover. I might also come back with some new species).</p>
</blockquote>
<p dir="auto"><em>Cogs turning in head...</em></p>
<p dir="auto">&lt;a href="<a href="http://cool-smileys.com//smiley-with-a-light-bulb-above-his-head" rel="nofollow ugc">http://cool-smileys.com//smiley-with-a-light-bulb-above-his-head</a>" target="_blank" rel="noopener noreferrer"&gt;&lt;img src="<a href="http://www.cool-smileys.com/images/58.gif" rel="nofollow ugc">http://www.cool-smileys.com/images/58.gif</a>" alt="banner" style="max-width: 100%; height: auto;" /&gt;&lt;/a&gt;</p>
<p dir="auto">I understand!  <img src="/assets/uploads/smileys/rofl.gif" alt=":rofl:" title="rofl" class="forum-smiley emoji" /><br />
17 years is a lot of time.  <img src="/assets/uploads/smileys/whistle.gif" alt=":whistle:" title="Whistle" class="forum-smiley emoji" /></p>
<p dir="auto">Not sure about the new species bit though. <img src="/assets/uploads/smileys/thinking.gif" alt=":think:" title="Thinking" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1516178</link><guid isPermaLink="true">https://multitool.ninja/post/1516178</guid><dc:creator><![CDATA[Don Pablo]]></dc:creator><pubDate>Tue, 18 Jul 2017 14:08:48 GMT</pubDate></item><item><title><![CDATA[Reply to Braided wire cutting. on Tue, 18 Jul 2017 13:53:00 GMT]]></title><description><![CDATA[<p dir="auto">I actually tried looking for some bicycle or lawnmover control wire to try varius pliers. Those sized wires seem quite appropriate for normal daily life tasks, and should reasonably be within expected range of a good plier?</p>
<p dir="auto">Typically though, when you need something it is nowhere to be found. When you don't it is in your face wherever you go.</p>
<p dir="auto">(I'm planning to mount an expedition later to some uncharted territories not frequented by man since last millenium. There are rumours among the natives that sound like sightings of an old lawnmover. I might also come back with some new species).</p>
]]></description><link>https://multitool.ninja/post/1516174</link><guid isPermaLink="true">https://multitool.ninja/post/1516174</guid><dc:creator><![CDATA[Vidar]]></dc:creator><pubDate>Tue, 18 Jul 2017 13:53:00 GMT</pubDate></item><item><title><![CDATA[Reply to Braided wire cutting. on Tue, 18 Jul 2017 13:32:09 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto">@50ft-trad <a href="/post/1516113">said</a>:</p>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/tosh" aria-label="Profile: tosh">@<bdi>tosh</bdi></a> <a href="/post/1515983">said</a>:</p>
<blockquote>
<p dir="auto">C'mon Al, give me a break....<br />
The situations and environment you describe above are well out of the realms of any MT, that's just common sense.<br />
My beef is the Tools they include are NOT justified by the high purchase cost nor the manufacturers claims.<br />
It's very rare I see a tradesman who uses MT's, most have one lying around in their vans or tool bags but not on person.....the reason is purely because they are too limited in their use. Not that they are not feature packed, but because their features don't perform good enough to justify edc!</p>
<p dir="auto">There is without doubt a colossal market out there for task specific MT's that DO work. But if the truth be said the current MT with its (yawn) predictable tool loadout is just not worth the hassle of committing to carry on a daily basis.</p>
<p dir="auto">We need to move away from what looks pretty and focus on practicality.</p>
</blockquote>
<p dir="auto">You may have missed the point that I was trying to make. I'll try again ...</p>
<p dir="auto">Despite multitools not offering many of the functions that I tended to use in the workplace, or not being up to the duty level for the heavy applications, I still got good use out of them, and in many cases felt like they paid for themselves. I didn't use the tools each and every day, but when I did, a lot of time was saved. For example I had an electrical cabinet key in my office, and every couple of months the catenary cable would snag on one of the machines (usually operator error), and trip a switch. If I had empty pockets (or the wrong tool in my pocket), I would have to go to the office for the cabinet key, and to the maintenance area for other tools. Repairing the cable, opening the cabinet, flicking the switch and resetting the machine would take 10 minutes with my Wave, or 30 minutes with the factory stuff. That's just one example and it doesn't sound like much, but having a simple multitool in my pocket could save me a couple of hours a week easily.</p>
<p dir="auto">Working in the boat engine room, I would usually have three different multitools with me. Not only is getting in and out for different tools time consuming, but also extremely awkward, and I did permanant damage to my knee climbing in and out to test fit some woodwork. I could stash the tools on the transom next to the weedhatch, along with three or four dedicated tools that I knew I'd need, and I'd spend just as much time using the multis than I would using dedicated tools. If I used dedicated tools all the way, it might literally have taken me three or four times as long to complete the task and my body would be in a worse state than it already is.</p>
<p dir="auto">I do appreciate that not everybody gets the same level of usefulness from tools, or the same real term value, but what I am saying is that not everybody sees them as barely useful gadgets. Some people here do actually get the level of functionality they need - they don't just tolerate the tool because there's nothing better, it genuinely does what they need it to do. For the most part they have served me well too, although I have tweaked several of them to improve (for me) the loadout or capability.</p>
<p dir="auto">I hope my point was clearer this time</p>
</blockquote>
<p dir="auto">Sorry Al</p>
<p dir="auto">Makes perfect sense now</p>
<p dir="auto">Back to topic....I took a minute to measure the SS braided cable that I used for the test. The works vernier stated 1.5mm!!</p>
<p dir="auto">I don't think that is asking too much, not sure of the size on bicycles. But as previously stated my old Gerber mp600 and Vic Seisstool chomped straight through without breaking sweat.</p>
]]></description><link>https://multitool.ninja/post/1516168</link><guid isPermaLink="true">https://multitool.ninja/post/1516168</guid><dc:creator><![CDATA[tosh]]></dc:creator><pubDate>Tue, 18 Jul 2017 13:32:09 GMT</pubDate></item><item><title><![CDATA[Reply to Braided wire cutting. on Tue, 18 Jul 2017 12:19:15 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto">@50ft-trad <a href="/post/1516113">said</a>:</p>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/tosh" aria-label="Profile: tosh">@<bdi>tosh</bdi></a> <a href="/post/1515983">said</a>:</p>
<blockquote>
<p dir="auto">C'mon Al, give me a break....<br />
The situations and environment you describe above are well out of the realms of any MT, that's just common sense.<br />
My beef is the Tools they include are NOT justified by the high purchase cost nor the manufacturers claims.<br />
It's very rare I see a tradesman who uses MT's, most have one lying around in their vans or tool bags but not on person.....the reason is purely because they are too limited in their use. Not that they are not feature packed, but because their features don't perform good enough to justify edc!</p>
<p dir="auto">There is without doubt a colossal market out there for task specific MT's that DO work. But if the truth be said the current MT with its (yawn) predictable tool loadout is just not worth the hassle of committing to carry on a daily basis.</p>
<p dir="auto">We need to move away from what looks pretty and focus on practicality.</p>
</blockquote>
<p dir="auto">You may have missed the point that I was trying to make. I'll try again ...</p>
<p dir="auto">Despite multitools not offering many of the functions that I tended to use in the workplace, or not being up to the duty level for the heavy applications, I still got good use out of them, and in many cases felt like they paid for themselves. I didn't use the tools each and every day, but when I did, a lot of time was saved. For example I had an electrical cabinet key in my office, and every couple of months the catenary cable would snag on one of the machines (usually operator error), and trip a switch. If I had empty pockets (or the wrong tool in my pocket), I would have to go to the office for the cabinet key, and to the maintenance area for other tools. Repairing the cable, opening the cabinet, flicking the switch and resetting the machine would take 10 minutes with my Wave, or 30 minutes with the factory stuff. That's just one example and it doesn't sound like much, but having a simple multitool in my pocket could save me a couple of hours a week easily.</p>
<p dir="auto">Working in the boat engine room, I would usually have three different multitools with me. Not only is getting in and out for different tools time consuming, but also extremely awkward, and I did permanant damage to my knee climbing in and out to test fit some woodwork. I could stash the tools on the transom next to the weedhatch, along with three or four dedicated tools that I knew I'd need, and I'd spend just as much time using the multis than I would using dedicated tools. If I used dedicated tools all the way, it might literally have taken me three or four times as long to complete the task and my body would be in a worse state than it already is.</p>
<p dir="auto">I do appreciate that not everybody gets the same level of usefulness from tools, or the same real term value, but what I am saying is that not everybody sees them as barely useful gadgets. Some people here do actually get the level of functionality they need - they don't just tolerate the tool because there's nothing better, it genuinely does what they need it to do. For the most part they have served me well too, although I have tweaked several of them to improve (for me) the loadout or capability.</p>
<p dir="auto">I hope my point was clearer this time</p>
</blockquote>
<p dir="auto">Nailed it with a sledge hammer!</p>
]]></description><link>https://multitool.ninja/post/1516118</link><guid isPermaLink="true">https://multitool.ninja/post/1516118</guid><dc:creator><![CDATA[ducttapetech]]></dc:creator><pubDate>Tue, 18 Jul 2017 12:19:15 GMT</pubDate></item><item><title><![CDATA[Reply to Braided wire cutting. on Tue, 18 Jul 2017 12:11:17 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/tosh" aria-label="Profile: tosh">@<bdi>tosh</bdi></a> <a href="/post/1515983">said</a>:<br />
C'mon Al, give me a break....<br />
The situations and environment you describe above are well out of the realms of any MT, that's just common sense.<br />
My beef is the Tools they include are NOT justified by the high purchase cost nor the manufacturers claims.<br />
It's very rare I see a tradesman who uses MT's, most have one lying around in their vans or tool bags but not on person.....the reason is purely because they are too limited in their use. Not that they are not feature packed, but because their features don't perform good enough to justify edc!</p>
<p dir="auto">There is without doubt a colossal market out there for task specific MT's that DO work. But if the truth be said the current MT with its (yawn) predictable tool loadout is just not worth the hassle of committing to carry on a daily basis.</p>
<p dir="auto">We need to move away from what looks pretty and focus on practicality.</p>
</blockquote>
<p dir="auto">You may have missed the point that I was trying to make. I'll try again ...</p>
<p dir="auto">Despite multitools not offering many of the functions that I tended to use in the workplace, or not being up to the duty level for the heavy applications, I still got good use out of them, and in many cases felt like they paid for themselves. I didn't use the tools each and every day, but when I did, a lot of time was saved. For example I had an electrical cabinet key in my office, and every couple of months the catenary cable would snag on one of the machines (usually operator error), and trip a switch. If I had empty pockets (or the wrong tool in my pocket), I would have to go to the office for the cabinet key, and to the maintenance area for other tools. Repairing the cable, opening the cabinet, flicking the switch and resetting the machine would take 10 minutes with my Wave, or 30 minutes with the factory stuff. That's just one example and it doesn't sound like much, but having a simple multitool in my pocket could save me a couple of hours a week easily.</p>
<p dir="auto">Working in the boat engine room, I would usually have three different multitools with me. Not only is getting in and out for different tools time consuming, but also extremely awkward, and I did permanant damage to my knee climbing in and out to test fit some woodwork. I could stash the tools on the transom next to the weedhatch, along with three or four dedicated tools that I knew I'd need, and I'd spend just as much time using the multis than I would using dedicated tools. If I used dedicated tools all the way, it might literally have taken me three or four times as long to complete the task and my body would be in a worse state than it already is.</p>
<p dir="auto">I do appreciate that not everybody gets the same level of usefulness from tools, or the same real term value, but what I am saying is that not everybody sees them as barely useful gadgets. Some people here do actually get the level of functionality they need - they don't just tolerate the tool because there's nothing better, it genuinely does what they need it to do. For the most part they have served me well too, although I have tweaked several of them to improve (for me) the loadout or capability.</p>
<p dir="auto">I hope my point was clearer this time</p>
]]></description><link>https://multitool.ninja/post/1516113</link><guid isPermaLink="true">https://multitool.ninja/post/1516113</guid><dc:creator><![CDATA[AimlessWanderer]]></dc:creator><pubDate>Tue, 18 Jul 2017 12:11:17 GMT</pubDate></item><item><title><![CDATA[Reply to Braided wire cutting. on Tue, 18 Jul 2017 11:12:25 GMT]]></title><description><![CDATA[<p dir="auto">Well you could buy MTs that <em>aren't</em> expensive and see how you get on...<br />
I think a lot of what you pay for in a higher-end multitool is design and manufacture costs as well as 'quality'.</p>
]]></description><link>https://multitool.ninja/post/1516073</link><guid isPermaLink="true">https://multitool.ninja/post/1516073</guid><dc:creator><![CDATA[Syncop8r]]></dc:creator><pubDate>Tue, 18 Jul 2017 11:12:25 GMT</pubDate></item><item><title><![CDATA[Reply to Braided wire cutting. on Tue, 18 Jul 2017 07:41:47 GMT]]></title><description><![CDATA[<p dir="auto">I think the fact that there aren't many task specific multitools out there should show that there isn't a colossal market for them.  Leatherman and Victorinox are both arguably very good at marketing (better than they are at making tools, maybe) and they don't have them in their range.  The companies that do offer task specific tools (Gerber, Wenger, SOG, Multitasker, etc) don't sell that many...</p>
<p dir="auto">Most multitools are pretty good at most things for most people.  If you need something more speSmurfpillsed, you'll have to use something more speSmurfpillsed.</p>
]]></description><link>https://multitool.ninja/post/1516004</link><guid isPermaLink="true">https://multitool.ninja/post/1516004</guid><dc:creator><![CDATA[hiraethus]]></dc:creator><pubDate>Tue, 18 Jul 2017 07:41:47 GMT</pubDate></item><item><title><![CDATA[Reply to Braided wire cutting. on Tue, 18 Jul 2017 06:25:33 GMT]]></title><description><![CDATA[<p dir="auto">C'mon Al, give me a break....<br />
The situations and environment you describe above are well out of the realms of any MT, that's just common sense.<br />
My beef is the Tools they include are NOT justified by the high purchase cost nor the manufacturers claims.<br />
It's very rare I see a tradesman who uses MT's, most have one lying around in their vans or tool bags but not on person.....the reason is purely because they are too limited in their use. Not that they are not feature packed, but because their features don't perform good enough to justify edc!</p>
<p dir="auto">There is without doubt a colossal market out there for task specific MT's that DO work. But if the truth be said the current MT with its (yawn) predictable tool loadout is just not worth the hassle of committing to carry on a daily basis.</p>
<p dir="auto">We need to move away from what looks pretty and focus on practicality.</p>
]]></description><link>https://multitool.ninja/post/1515983</link><guid isPermaLink="true">https://multitool.ninja/post/1515983</guid><dc:creator><![CDATA[tosh]]></dc:creator><pubDate>Tue, 18 Jul 2017 06:25:33 GMT</pubDate></item></channel></rss>