<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0"><channel><title><![CDATA[Shootout- Leatherman Skeletool vs SOG Reactor]]></title><description><![CDATA[<p dir="auto">It’s not often you get the opportunity to pit a multitool directly against a competitor as the variety of functions makes almost every model different from every other one.  Occasionally though, we manage to find a couple that are close enough that we can match them against eachother in a very fair fight- last year it was the Leatherman OHT vs the Gerber Center-Drive and it resulted in a draw.  You can see last year’s match up here:</p>
<p dir="auto">/topic/71214</p>
<p dir="auto">This year we are going compact as the SOG Reactor takes on the Leatherman Skeletool.</p>
<p dir="auto"><img src="http://gallery.multitool.org/var/resizes/SOG/Reactor-Vs-Skeletool/15184615963278.jpg?m=1518707645" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Both tools are compact, lightweight EDC tools with a basic tool loadout featuring blades, pliers, bottle openers and screwdrivers- just the necessities.  And, both tools are meant to be pocket carried, with no sheaths, bit sets or other addons.</p>
<p dir="auto">As with last year’s battle my feelings on this fight are well documented, and again I am not in Leatherman’s corner, but I will look at each and every aspect of this bottle objectively and award points on each tool’s merits.  I have even made my preference on this one known on video.</p>
<p dir="auto"><a href="https://www.youtube.com/watch?v=p36GdLT0Okc" rel="nofollow ugc">https://www.youtube.com/watch?v=p36GdLT0Okc</a></p>
<p dir="auto">But, enough of that- let’s get this show on the road!</p>
<p dir="auto"><strong>Part 1- Tale of the Tape</strong></p>
<p dir="auto"><img src="http://gallery.multitool.org/var/resizes/SOG/Reactor-Vs-Skeletool/15184615957050.jpg?m=1518707633" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="http://gallery.multitool.org/var/resizes/SOG/Reactor-Vs-Skeletool/15184615961304.jpg?m=1518707598" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Skeletool	<br />
Length	105mm	<br />
Width	34mm	<br />
Thickness	18.5mm	<br />
Weight	145g	<br />
MSRP	$59.95-79.95</p>
<p dir="auto"><img src="http://gallery.multitool.org/var/resizes/SOG/Reactor-Vs-Skeletool/15184615959761.jpg?m=1518707598" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="http://gallery.multitool.org/var/resizes/SOG/Reactor-Vs-Skeletool/15184615960272.jpg?m=1518707598" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Reactor<br />
Length   97mm<br />
Width   30mm<br />
Thickness   22mm<br />
Weight   114g<br />
MSRP   $67.00</p>
<p dir="auto"><img src="http://gallery.multitool.org/var/resizes/SOG/Reactor-Vs-Skeletool/15184615960983.jpg?m=1518707598" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Overall the Reactor is significantly more compact than the Skeletool and because of that, the Reactor draws first blood by taking the first point.  When it comes to a compact EDC tool you just can’t help but award the prize to the most compact tool, and with over an ounce less weight (31g = 1.1oz) but the same number of functions it’s a significant difference.</p>
<p dir="auto"><img src="http://gallery.multitool.org/var/resizes/SOG/Reactor-Vs-Skeletool/15184615961975.jpg?m=1518707599" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Price wise I would like to score it a tie- some iterations of the Skeletool are more expensive than the Reactor while others are cheaper.  The bottom line is though, the Skeletool is available for less money, but with all of the functions, or even cheaper if you want to start whittling away functions, such as the KB or Freestyle series, but those are a bit of an offshoot and not really relevant to this discussion.</p>
<p dir="auto"><img src="http://gallery.multitool.org/var/resizes/SOG/Reactor-Vs-Skeletool/15184615962787.jpg?m=1518707600" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="http://gallery.multitool.org/var/resizes/SOG/Reactor-Vs-Skeletool/15184615962346.jpg?m=1518707599" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto"><strong>SCORE-</strong> SOG 1, Leatherman 1</p>
<p dir="auto">Stay tuned for Part 2 tomorrow.   <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
<p dir="auto">Def</p>
]]></description><link>https://multitool.ninja/topic/75949/shootout-leatherman-skeletool-vs-sog-reactor</link><generator>RSS for Node</generator><lastBuildDate>Thu, 19 Nov 2026 20:50:56 GMT</lastBuildDate><atom:link href="https://multitool.ninja/topic/75949.rss" rel="self" type="application/rss+xml"/><pubDate>Thu, 15 Feb 2018 15:20:00 GMT</pubDate><ttl>60</ttl><item><title><![CDATA[Reply to Shootout- Leatherman Skeletool vs SOG Reactor on Sun, 04 Mar 2018 00:18:59 GMT]]></title><description><![CDATA[<p dir="auto">It's not an argument- if you like the Skeletool better, by all means, feel free to explain why.  That's what a forum is all about!</p>
<p dir="auto">No one needs to take my ramblings as the Gospel- different things are more important to different people, which is why there are so many different (and successful!) models out there.</p>
<p dir="auto">Believe it or not, I am more interested in generating discussion (that's how forums survive) than I am about promoting one tool over another.</p>
<p dir="auto">The day my opinion carries any more weight than anyone else's is the day this stops being a <em>forum</em> and starts being an <em>againstum</em>.</p>
<p dir="auto">Def</p>
]]></description><link>https://multitool.ninja/post/1649714</link><guid isPermaLink="true">https://multitool.ninja/post/1649714</guid><dc:creator><![CDATA[Grant Lamontagne]]></dc:creator><pubDate>Sun, 04 Mar 2018 00:18:59 GMT</pubDate></item><item><title><![CDATA[Reply to Shootout- Leatherman Skeletool vs SOG Reactor on Sun, 04 Mar 2018 00:10:53 GMT]]></title><description><![CDATA[<p dir="auto">Ok ok I give up👍</p>
]]></description><link>https://multitool.ninja/post/1649711</link><guid isPermaLink="true">https://multitool.ninja/post/1649711</guid><dc:creator><![CDATA[Old Boy]]></dc:creator><pubDate>Sun, 04 Mar 2018 00:10:53 GMT</pubDate></item><item><title><![CDATA[Reply to Shootout- Leatherman Skeletool vs SOG Reactor on Sat, 03 Mar 2018 21:49:14 GMT]]></title><description><![CDATA[<p dir="auto">If you want to add in accessories.....  <img src="/assets/uploads/smileys/poke2.gif" alt=":pok:" title="pok" class="forum-smiley emoji" /></p>
<p dir="auto">For the same price (or less) as the fancy Leatherman bit extender you can probably get a multi piece bit set with a variety of bit types and lengths that fit natively in the SOG without the need for an adaptor.  :P</p>
<p dir="auto">Def</p>
]]></description><link>https://multitool.ninja/post/1649655</link><guid isPermaLink="true">https://multitool.ninja/post/1649655</guid><dc:creator><![CDATA[Grant Lamontagne]]></dc:creator><pubDate>Sat, 03 Mar 2018 21:49:14 GMT</pubDate></item><item><title><![CDATA[Reply to Shootout- Leatherman Skeletool vs SOG Reactor on Sat, 03 Mar 2018 05:43:43 GMT]]></title><description><![CDATA[<p dir="auto">I agree about the disadvantages of the Leathermans flat bits, but if I were to allow my Leatherman fan boy side to shine through.  I would say that it was decent of them to have the bit extender take the normal shape bits as well as the flat bits, and the flat bits do take up less space.</p>
<p dir="auto">To split hairs even further, the flat bits probably use less steel to make and preserve our natural resources just a little bit.</p>
<p dir="auto">Get it? See what I just did there? Little “bit”.  Ba dum dum!!!</p>
]]></description><link>https://multitool.ninja/post/1649278</link><guid isPermaLink="true">https://multitool.ninja/post/1649278</guid><dc:creator><![CDATA[Old Boy]]></dc:creator><pubDate>Sat, 03 Mar 2018 05:43:43 GMT</pubDate></item><item><title><![CDATA[Reply to Shootout- Leatherman Skeletool vs SOG Reactor on Thu, 01 Mar 2018 15:58:30 GMT]]></title><description><![CDATA[<p dir="auto">They do like their branding, that's for sure!</p>
<p dir="auto">Def</p>
]]></description><link>https://multitool.ninja/post/1648343</link><guid isPermaLink="true">https://multitool.ninja/post/1648343</guid><dc:creator><![CDATA[Grant Lamontagne]]></dc:creator><pubDate>Thu, 01 Mar 2018 15:58:30 GMT</pubDate></item><item><title><![CDATA[Reply to Shootout- Leatherman Skeletool vs SOG Reactor on Thu, 01 Mar 2018 12:04:06 GMT]]></title><description><![CDATA[<p dir="auto">How many SOG stamps can you find on that multi? Someone in SOG designing dept must really love graffiti.</p>
]]></description><link>https://multitool.ninja/post/1648196</link><guid isPermaLink="true">https://multitool.ninja/post/1648196</guid><dc:creator><![CDATA[chrono]]></dc:creator><pubDate>Thu, 01 Mar 2018 12:04:06 GMT</pubDate></item><item><title><![CDATA[Reply to Shootout- Leatherman Skeletool vs SOG Reactor on Thu, 01 Mar 2018 09:09:25 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/maverickmcs" aria-label="Profile: MaverickMCS">@<bdi>MaverickMCS</bdi></a> <a href="/post/1648101">said</a>:<br />
Unfortunately I have to agree here. Nowdays when I see a new release by SOG, instead of getting interested, I immediately think about things like &lt;/topic/40498<br />
Knowing that a company can put out stuff like that for sale can really shake one's confidence in said company. Like you said, I think it would take a few years of flawless work to restore confidence, at least for me. A Seal Pup Elite is still on my bucket list though...</p>
</blockquote>
<p dir="auto">Thanks for the link.</p>
]]></description><link>https://multitool.ninja/post/1648103</link><guid isPermaLink="true">https://multitool.ninja/post/1648103</guid><dc:creator><![CDATA[ReamerPunch]]></dc:creator><pubDate>Thu, 01 Mar 2018 09:09:25 GMT</pubDate></item><item><title><![CDATA[Reply to Shootout- Leatherman Skeletool vs SOG Reactor on Thu, 01 Mar 2018 08:59:26 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto">@50ft-trad <a href="/post/1647836">said</a>:<br />
I find the "insight" into SOG's sudden interest in quality improvements, to be disappointingly overdue. For four (or is it five) years now, they have been cementing their position as a company who cares very little about quality. Interested in design concepts, maybe, and in profit margins, but not in refining the concepts, ensuring that concepts are properly realised in the manufacturing stages, making sure that the products are indeed of useable tool quality, or giving a crap about their reputation in the marketplace.</p>
<p dir="auto">If SOG are listening, and I hope they are, they need to understand and be prepared to accept that even if every single tool they sold from today onwards, was of the quality that they should have been for the last few years, this is going to be a slow recovery of customer trust. They have pumped many disappointing tools out for several years, and that kind of reputation damage doesn't get swept under the carpet quickly. They now need to consistently put TOOLS on the market, instead of novelty "dad gifts". Not just one or two, but the whole line, and make sure each and every current product, and every subsequent new release, can be carried and USED in real life applications with full confidence. Even then, it may take five years of high quality tools, to start undoing the damage from five years of defects, misinformation, and sloppily built overpriced gadgets. There's no quick fix, fellers - but you've only yourselves to blame. Good luck in your recovery.</p>
</blockquote>
<p dir="auto">Unfortunately I have to agree here. Nowdays when I see a new release by SOG, instead of getting interested, I immediately think about things like &lt;/topic/40498<br />
Knowing that a company can put out stuff like that for sale can really shake one's confidence in said company. Like you said, I think it would take a few years of flawless work to restore confidence, at least for me. A Seal Pup Elite is still on my bucket list though...</p>
]]></description><link>https://multitool.ninja/post/1648101</link><guid isPermaLink="true">https://multitool.ninja/post/1648101</guid><dc:creator><![CDATA[MaverickMCS]]></dc:creator><pubDate>Thu, 01 Mar 2018 08:59:26 GMT</pubDate></item><item><title><![CDATA[Reply to Shootout- Leatherman Skeletool vs SOG Reactor on Thu, 01 Mar 2018 01:45:27 GMT]]></title><description><![CDATA[<p dir="auto">I've never had that. Not even with my softest backsprung non-locking knives. I've never tried to flick any of them closed though, so I don't know how unfeasable that would be in my usage....</p>
<p dir="auto"><em>goes and gets one to try</em></p>
<p dir="auto">Nope. Won't do it! <img src="/assets/uploads/smileys/shrug.gif" alt=":shrug:" title="Shrug" class="forum-smiley emoji" /> but then, I don't have any particularly large folders.</p>
<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/nix" aria-label="Profile: Nix">@<bdi>Nix</bdi></a> <a href="/post/1648003">said</a>:<br />
A lock doesn't prevent disaster, but it's better than no safety mechanism at all.   <img src="/assets/uploads/smileys/whistle.gif" alt=":whistle:" title="Whistle" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">Unless it makes it LESS safe than a simple backspring, which appears to be my experience...</p>
<p dir="auto">There's an odd (and often misunderstood) quirk with British knife law. A locking blade isn't illegal - it's just in the same legal category as a fixed blade. Therefore, you need a valid reason to carry a fixed blade, in order to carry a locking folder.... in which case, you might as well carry the fixed blade  :D</p>
<p dir="auto">We're back to lock not needed (well, here anyway).</p>
]]></description><link>https://multitool.ninja/post/1648007</link><guid isPermaLink="true">https://multitool.ninja/post/1648007</guid><dc:creator><![CDATA[AimlessWanderer]]></dc:creator><pubDate>Thu, 01 Mar 2018 01:45:27 GMT</pubDate></item><item><title><![CDATA[Reply to Shootout- Leatherman Skeletool vs SOG Reactor on Thu, 01 Mar 2018 01:19:25 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto">No arguing. Just a friendly exchange of different perspectives.</p>
</blockquote>
<p dir="auto">Smurf it all, Trad! Let's fight!</p>
<p dir="auto">Here is how I recall my Endura failing and cutting me (this may all be a lie, but I think it's true.): I was trying to cut through a thick branch. I made a Herculean cut with exuberance. A real Conan-the-Barbarian kind of cut. As the blade passed through the branch, all the force of the cut was dissipated. The blade then had a large amount of momentum. That momentum was translated into angular velocity focused around the pivot point. With my knuckle actuating the lock--at least in part--the blade was released to rotate around the pivot point and whack my fingers. Whack 'em with the sharp bit. FAIL.</p>
<p dir="auto">And this is the safety concern. A force applied to a blade correctly pushes the blade into the 'open' position. But once that force doesn't have an "opposite and equal" force applied by the medium being cut, funny things happen. Inertia and the forces of deceleration come into play. And then close that razor sharp edge on yer fingers. For that reason, a lock offers--in my over-confident opinion--a margin of safety against the inertial forces at play when an open blade is being rapidly decelerated. Baseball players are known to break baseball bats by rapidly checking their swings to avoid a strike. I'm not claiming to have the wrists of an MLB batter, but the principle is the same. A lock doesn't prevent disaster, but it's better than no safety mechanism at all.   <img src="/assets/uploads/smileys/whistle.gif" alt=":whistle:" title="Whistle" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1648003</link><guid isPermaLink="true">https://multitool.ninja/post/1648003</guid><dc:creator><![CDATA[Nix]]></dc:creator><pubDate>Thu, 01 Mar 2018 01:19:25 GMT</pubDate></item><item><title><![CDATA[Reply to Shootout- Leatherman Skeletool vs SOG Reactor on Thu, 01 Mar 2018 00:26:36 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/nix" aria-label="Profile: Nix">@<bdi>Nix</bdi></a> <a href="/post/1647943">said</a>:<br />
I had a couple of cuts after my Spyderco Endura's lock failed (two or three times). I was seriously annoyed and wrote to Spyderco: "your back-lock fails!". This was in 1997. They wrote back and told me I was wrong. What the smurf?!? I had the Band-Aid bill to prove it!</p>
<p dir="auto">A few years later they came out with the "Boye Detent" and I felt vindicated. Since then, though, I've never had a lock fail. And I ain't kind to my knives.</p>
<p dir="auto">So, I'm not dismissing your concerns, but I don't have the same experience that you do. I'm quite confident in most (99%) of my locking knives and far, far more confident in my locking knives than I am in my slippies. Of course, my concern about the safety of my slip joints may make me more cautious when using them, and that might be a safety advantage.  <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
<p dir="auto">(Hey, nice arguing with you, Trad!)</p>
</blockquote>
<p dir="auto">Oh, it's not the lock failing that's drawn blood here. It's the having to put your fingers in the path of the blade to unlock it.</p>
<p dir="auto">I've never had a lock fail, because I never use it so that the lock is needed - or in other words, I use it like a slipjoint. If I ever do anything that warrants a lock, it's time for a different tool. If there are no other tools, i'll modify the usage so the lock isn't loaded (such as a pinch hold on the blade itself). Cutting through something where the blade might jam? Raise the handle first, so you're rolling the knife out.</p>
<p dir="auto">Every lock knife cut that I've had has been from closing the blade, either one handed, or two handed while my attention has been elsewhere. One hand closing is way more important to me than one hand opening (though it's nice to have both), and I can safely one handed close a slippy with less chance of a cut than I can a blade that locks but doesn't need to  :D</p>
<p dir="auto">I've also had near misses purely due to unfamiliarity. I was using a 111mm Vic once, and totally forgot the blade locked. I went to close it as if it was a slippy, and just pushed the blade out of my hand, and it landed point down. Luckily, I managed to get my foot out of the way in time.</p>
<p dir="auto">When I tell people that I consider slippies to be safer than locking blades, they tend to look at me as if my head buttons up the back. That level of confusion that they have in that moment, is the exact same confusion that I have when someone says a locking blade is safer. Seriously! I genuinely do not understand how anyone is "safely" using a folding knife, in such a way that the lock is needed? That means the blade is under force the wrong way.  :ahhh Even when making piercing cuts, I always make sure the forces are going the right way, pushing the blade open. Unless I'm missing something, that means no lock needed.</p>
<p dir="auto"><img src="/assets/uploads/smileys/shrug.gif" alt=":shrug:" title="Shrug" class="forum-smiley emoji" /></p>
<p dir="auto">No arguing. Just a friendly exchange of different perspectives  <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1647963</link><guid isPermaLink="true">https://multitool.ninja/post/1647963</guid><dc:creator><![CDATA[AimlessWanderer]]></dc:creator><pubDate>Thu, 01 Mar 2018 00:26:36 GMT</pubDate></item><item><title><![CDATA[Reply to Shootout- Leatherman Skeletool vs SOG Reactor on Wed, 28 Feb 2018 23:43:55 GMT]]></title><description><![CDATA[<p dir="auto">I had a couple of cuts after my Spyderco Endura's lock failed (two or three times). I was seriously annoyed and wrote to Spyderco: "your back-lock fails!". This was in 1997. They wrote back and told me I was wrong. What the smurf?!? I had the Band-Aid bill to prove it!</p>
<p dir="auto">A few years later they came out with the "Boye Detent" and I felt vindicated. Since then, though, I've never had a lock fail. And I ain't kind to my knives.</p>
<p dir="auto">So, I'm not dismissing your concerns, but I don't have the same experience that you do. I'm quite confident in most (99%) of my locking knives and far, far more confident in my locking knives than I am in my slippies. Of course, my concern about the safety of my slip joints may make me more cautious when using them, and that might be a safety advantage.  <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
<p dir="auto">(Hey, nice arguing with you, Trad!)</p>
]]></description><link>https://multitool.ninja/post/1647943</link><guid isPermaLink="true">https://multitool.ninja/post/1647943</guid><dc:creator><![CDATA[Nix]]></dc:creator><pubDate>Wed, 28 Feb 2018 23:43:55 GMT</pubDate></item><item><title><![CDATA[Reply to Shootout- Leatherman Skeletool vs SOG Reactor on Wed, 28 Feb 2018 23:03:15 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/nix" aria-label="Profile: Nix">@<bdi>Nix</bdi></a> <a href="/post/1647913">said</a>:<br />
I'm a fan of a locking knife because it is safer than a slip joint. Now, I love me a traditional slip joint, but I always feel safer using a locking knife. Or, at least, a knife that locks securely.</p>
</blockquote>
<p dir="auto">I find slipjoints to be safer. I have had far more nicks and cuts from locking blades than non-locking blades - particularly back locks, which I now refuse to use, but also from many liner locks too. I do appreciate that I am deep in minority territory on that one...</p>
<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/nix" aria-label="Profile: Nix">@<bdi>Nix</bdi></a> <a href="/post/1647913">said</a>:<br />
I agree with your assessment that the Skeletool is a knife with pliers as opposed to a pair of pliers with a knife. This is true from my perspective. But, sometimes I want a knife (the tool I use the most) and think it might be nice to have some pliers along for the ride. In this respect, the Skele and Reactor do fill a specific role or, perhaps better, a specific set of anticipated needs.</p>
</blockquote>
<p dir="auto">I much prefer to have a stand alone pocket knife than the knife on any pliers tool. I consider my pliers tool to be my pocket "everything else other than a knife", and would rather they made it knifeless, and put something else useful in it's place. I'm still in the minority on this one too, but a larger minority this time.</p>
<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/nix" aria-label="Profile: Nix">@<bdi>Nix</bdi></a> <a href="/post/1647913">said</a>:<br />
Options is good.  <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">On this, I agree 100%  <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1647928</link><guid isPermaLink="true">https://multitool.ninja/post/1647928</guid><dc:creator><![CDATA[AimlessWanderer]]></dc:creator><pubDate>Wed, 28 Feb 2018 23:03:15 GMT</pubDate></item><item><title><![CDATA[Reply to Shootout- Leatherman Skeletool vs SOG Reactor on Wed, 28 Feb 2018 22:52:38 GMT]]></title><description><![CDATA[<p dir="auto">All good points as were the ones before yours but the issue that I have with both tools here is that they not only seem like 1/2 tool sets but lesser quality for it as well?<br />
They seem to think that there is a need to cut corners for price and/or weight while making the tool a crippled version of the real deal too.</p>
<p dir="auto">Take Vic though where pretty much any SAK that you get from the smallest to the biggest is still pretty much the same quality and design just scaled for different needs but always a good value for the quality regardless!</p>
<p dir="auto">I would jump all over a small Spirit X Mini that was pint sized and just a shrunken Spirit in body &amp; Spirit but the idea of throwing good money for the Skeletool for instance leads me to consider the Rebar or even Sidekick/Wingman for the same price where each is a pretty serious Heavy Duty tool in their own right.</p>
<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/nix" aria-label="Profile: Nix">@<bdi>Nix</bdi></a> <a href="/post/1647913">said</a>:<br />
Good addition to the argument, Trad.</p>
<p dir="auto">I'm a fan of a locking knife because it is safer than a slip joint. Now, I love me a traditional slip joint, but I always feel safer using a locking knife. Or, at least, a knife that locks securely.</p>
<p dir="auto">These comments are coming from a guy who prefers to carry a fixed blade knife (and frequently does so). No one will ever convince me that a folder is a good substitute for a fixie, but in modern societies they aren't as well accepted as they should be (according to me  :D). So we are left with tiny knives that fold. And here a locking knife blade is a good idea for safety and security.</p>
<p dir="auto">I agree with your assessment that the Skeletool is a knife with pliers as opposed to a pair of pliers with a knife. This is true from my perspective. But, sometimes I want a knife (the tool I use the most) and think it might be nice to have some pliers along for the ride. In this respect, the Skele and Reactor do fill a specific role or, perhaps better, a specific set of anticipated needs.</p>
<p dir="auto">In the end, I don't carry my Skele as often as I have my Charge or, now, REBAR. But I like having it as an option. In this respect I think Leatherman and SOG should continue to evaluate, improve, and produce these tools. Options is good.  <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
</blockquote>
]]></description><link>https://multitool.ninja/post/1647925</link><guid isPermaLink="true">https://multitool.ninja/post/1647925</guid><dc:creator><![CDATA[ezdog]]></dc:creator><pubDate>Wed, 28 Feb 2018 22:52:38 GMT</pubDate></item><item><title><![CDATA[Reply to Shootout- Leatherman Skeletool vs SOG Reactor on Wed, 28 Feb 2018 22:42:17 GMT]]></title><description><![CDATA[<p dir="auto">Good addition to the argument, Trad.</p>
<p dir="auto">I'm a fan of a locking knife because it is safer than a slip joint. Now, I love me a traditional slip joint, but I always feel safer using a locking knife. Or, at least, a knife that locks securely.</p>
<p dir="auto">These comments are coming from a guy who prefers to carry a fixed blade knife (and frequently does so). No one will ever convince me that a folder is a good substitute for a fixie, but in modern societies they aren't as well accepted as they should be (according to me  :D). So we are left with tiny knives that fold. And here a locking knife blade is a good idea for safety and security.</p>
<p dir="auto">I agree with your assessment that the Skeletool is a knife with pliers as opposed to a pair of pliers with a knife. This is true from my perspective. But, sometimes I want a knife (the tool I use the most) and think it might be nice to have some pliers along for the ride. In this respect, the Skele and Reactor do fill a specific role or, perhaps better, a specific set of anticipated needs.</p>
<p dir="auto">In the end, I don't carry my Skele as often as I have my Charge or, now, REBAR. But I like having it as an option. In this respect I think Leatherman and SOG should continue to evaluate, improve, and produce these tools. Options is good.  <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1647913</link><guid isPermaLink="true">https://multitool.ninja/post/1647913</guid><dc:creator><![CDATA[Nix]]></dc:creator><pubDate>Wed, 28 Feb 2018 22:42:17 GMT</pubDate></item><item><title><![CDATA[Reply to Shootout- Leatherman Skeletool vs SOG Reactor on Wed, 28 Feb 2018 21:06:00 GMT]]></title><description><![CDATA[<p dir="auto">Nice work, Grant.  <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
<p dir="auto">I think that was a fair and balanced appraisal, and not just balanced in the end result. I wouldn't agree with every point, but then nobody would. We all value things slightly differently, based on our own needs and preferences. That said, I do not have any significant arguements with any of the findings herein.</p>
<p dir="auto">From my own perspective, I have commented in the past about the ergonomics of the Skeletool, the fact that SOG's compound leverage is great for amplifying gripping force on smaller items, but actually reduces gripping force on larger items due to making the grip ergonomically inefficient, and SOG's reputation for inferior quality over the last few years.</p>
<p dir="auto">However, I think my dislike of both these tools is more fundamental to the tool format. Kampfer has rightly said in the past, that the Skele is unlike other "pliers based" tools, and is more of a "knife with pliers" than "pliers with a knife". The Reactor has done a good job of capturing that same essence of form. However, it's not a knife form that I have any liking or need for. I appreciate that some people like the locking knife format, but is I can't do a job with a slippie, I need a fixed blade, not one that is pretending to be. I certainly have no interest whatsoever in any kind of assisted blade, or any other "tacticool" elemental.</p>
<p dir="auto">I am simply the wrong person for these tools.</p>
<p dir="auto">If I DID have a genuine requirement for a one hand opening locking blade, that happened to have pliers and screwdrivers, which would I go for? Well I would got for one which I felt gave me the best ergonomics, and the one that I trusted the most. For me, that would be the Buck X-Tract, or X-Tract Fin. I recognise that is a discontinued model, but I happen to have one, and would rather reach for that than either of the two reviewed here.</p>
<p dir="auto">I find the "insight" into SOG's sudden interest in quality improvements, to be disappointingly overdue. For four (or is it five) years now, they have been cementing their position as a company who cares very little about quality. Interested in design concepts, maybe, and in profit margins, but not in refining the concepts, ensuring that concepts are properly realised in the manufacturing stages, making sure that the products are indeed of useable tool quality, or giving a crap about their reputation in the marketplace.</p>
<p dir="auto">If SOG are listening, and I hope they are, they need to understand and be prepared to accept that even if every single tool they sold from today onwards, was of the quality that they should have been for the last few years, this is going to be a slow recovery of customer trust. They have pumped many disappointing tools out for several years, and that kind of reputation damage doesn't get swept under the carpet quickly. They now need to consistently put TOOLS on the market, instead of novelty "dad gifts". Not just one or two, but the whole line, and make sure each and every current product, and every subsequent new release, can be carried and USED in real life applications with full confidence. Even then, it may take five years of high quality tools, to start undoing the damage from five years of defects, misinformation, and sloppily built overpriced gadgets. There's no quick fix, fellers - but you've only yourselves to blame. Good luck in your recovery.</p>
]]></description><link>https://multitool.ninja/post/1647836</link><guid isPermaLink="true">https://multitool.ninja/post/1647836</guid><dc:creator><![CDATA[AimlessWanderer]]></dc:creator><pubDate>Wed, 28 Feb 2018 21:06:00 GMT</pubDate></item><item><title><![CDATA[Reply to Shootout- Leatherman Skeletool vs SOG Reactor on Wed, 28 Feb 2018 18:37:29 GMT]]></title><description><![CDATA[<p dir="auto">Great write up and glad both were given a fair chance <img src="/assets/uploads/smileys/like-sign.gif" alt=":like:" title="I like this" class="forum-smiley emoji" /> I have a Skeley and have looked at the Reactor several times but never have gotten one :D If the QC may be better in the near future I may very well get one then though <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1647696</link><guid isPermaLink="true">https://multitool.ninja/post/1647696</guid><dc:creator><![CDATA[Poncho65]]></dc:creator><pubDate>Wed, 28 Feb 2018 18:37:29 GMT</pubDate></item><item><title><![CDATA[Reply to Shootout- Leatherman Skeletool vs SOG Reactor on Wed, 28 Feb 2018 17:03:42 GMT]]></title><description><![CDATA[<p dir="auto">Darn it! I was hoping you’d say Skeletool coz it’s sexy.</p>
]]></description><link>https://multitool.ninja/post/1647611</link><guid isPermaLink="true">https://multitool.ninja/post/1647611</guid><dc:creator><![CDATA[Old Boy]]></dc:creator><pubDate>Wed, 28 Feb 2018 17:03:42 GMT</pubDate></item><item><title><![CDATA[Reply to Shootout- Leatherman Skeletool vs SOG Reactor on Wed, 28 Feb 2018 15:28:56 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/old-boy" aria-label="Profile: OldBoy2016">@<bdi>OldBoy2016</bdi></a> <a href="/post/1647532">said</a>:<br />
Special request for a tie breaker. How about which tool has Joie de vivre? ;)</p>
</blockquote>
<p dir="auto">The reactor because the assisted opening blade is fun to play with.  :P</p>
<p dir="auto">Def</p>
]]></description><link>https://multitool.ninja/post/1647542</link><guid isPermaLink="true">https://multitool.ninja/post/1647542</guid><dc:creator><![CDATA[Grant Lamontagne]]></dc:creator><pubDate>Wed, 28 Feb 2018 15:28:56 GMT</pubDate></item><item><title><![CDATA[Reply to Shootout- Leatherman Skeletool vs SOG Reactor on Wed, 28 Feb 2018 15:11:52 GMT]]></title><description><![CDATA[<p dir="auto">Special request for a tie breaker. How about which tool has Joie de vivre? ;)</p>
]]></description><link>https://multitool.ninja/post/1647532</link><guid isPermaLink="true">https://multitool.ninja/post/1647532</guid><dc:creator><![CDATA[Old Boy]]></dc:creator><pubDate>Wed, 28 Feb 2018 15:11:52 GMT</pubDate></item><item><title><![CDATA[Reply to Shootout- Leatherman Skeletool vs SOG Reactor on Wed, 28 Feb 2018 14:14:48 GMT]]></title><description><![CDATA[<p dir="auto">Great review!   <img src="/assets/uploads/smileys/like-sign.gif" alt=":like:" title="I like this" class="forum-smiley emoji" /> I though the final part was probably the best.  <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" />  As someone that has owned and carried both I have to say that the Skeletool is the winner for me personally.  The quality of the build is evident the first time you use the tool hard.  The Leatherman is just stiffer, tighter and more refined.  I think a lot of SOG tools would benefit from making the sheet-metal they use in the handle from steel just a few thousands of an inch thicker.  Yes that it not simple change but it would make a huge difference to how stiff the tool feel in the hand under heavy use.</p>
]]></description><link>https://multitool.ninja/post/1647499</link><guid isPermaLink="true">https://multitool.ninja/post/1647499</guid><dc:creator><![CDATA[mcb]]></dc:creator><pubDate>Wed, 28 Feb 2018 14:14:48 GMT</pubDate></item><item><title><![CDATA[Reply to Shootout- Leatherman Skeletool vs SOG Reactor on Wed, 28 Feb 2018 12:44:35 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto">@Alan K. <a href="/post/1647207">said</a>:<br />
I think if you are looking for a tie breaker the Skeletool wins on price because they were a Christmas special at Home Depot in 2016 for under $30.00, and even though they weren't available at that price for the 2017 holidays many of us did buy them when they were on sale, and there's no reason to believe they won't be a Christmas special again in the future.</p>
</blockquote>
<p dir="auto">The Skeletool already won a point based on price.</p>
<p dir="auto">With pricing I always go with MSRP because it is the only fair way to do it- after all, I got this Reactor free from SOG for review purposes, and I bought that Skeletool.  By that logic, the Reactor should have won the price point because it cost me less, even though that isn't a deal that just anyone can go out and get any time.  Also, as a registered SOG dealer but not a Leatherman dealer, I can but SOG products at wholesale (cheaper) than I can buy Leatherman products (retail), so again Leatherman would have lost their point here.</p>
<p dir="auto">I will always hold to MSRP for these things because there are always deals to be had, but MSRP is a benchmark that all brands adhere to, and it's only fair to have them all compete on the same level.</p>
<p dir="auto">Def</p>
]]></description><link>https://multitool.ninja/post/1647420</link><guid isPermaLink="true">https://multitool.ninja/post/1647420</guid><dc:creator><![CDATA[Grant Lamontagne]]></dc:creator><pubDate>Wed, 28 Feb 2018 12:44:35 GMT</pubDate></item><item><title><![CDATA[Reply to Shootout- Leatherman Skeletool vs SOG Reactor on Wed, 28 Feb 2018 12:22:16 GMT]]></title><description><![CDATA[<p dir="auto">yes, boss, well written and entertaining.  <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
<p dir="auto">Thanks for such an insightful overview of the tools, I've always put the Skele above the Reactor but this comparison brought up some points I didn't think about, that make it an attractive alternative.   <img src="/assets/uploads/smileys/salute.gif" alt=":salute:" title="salute" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1647408</link><guid isPermaLink="true">https://multitool.ninja/post/1647408</guid><dc:creator><![CDATA[ThePeacent]]></dc:creator><pubDate>Wed, 28 Feb 2018 12:22:16 GMT</pubDate></item><item><title><![CDATA[Reply to Shootout- Leatherman Skeletool vs SOG Reactor on Wed, 28 Feb 2018 02:38:04 GMT]]></title><description><![CDATA[<p dir="auto">Awesome wright-up Grant... thanks again...</p>
<p dir="auto">I have a few skeletools and used to edc one before I bought a SOG micro tool clip.. Actually miss the Skeletool too...</p>
<p dir="auto">Your write-up has also opened my eyes to the Reactor... prior to this, the side by side shoot out  I’ve seen has always been one sided...</p>
<p dir="auto">Sent from my iPhone using Tapatalk</p>
]]></description><link>https://multitool.ninja/post/1647212</link><guid isPermaLink="true">https://multitool.ninja/post/1647212</guid><dc:creator><![CDATA[jaya_man]]></dc:creator><pubDate>Wed, 28 Feb 2018 02:38:04 GMT</pubDate></item></channel></rss>