<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0"><channel><title><![CDATA[PowerPint Overview Mighty Little MT]]></title><description><![CDATA[<p dir="auto">This is just a first impression overview of my newly received SOG PowerPint.</p>
<p dir="auto">It arrived in a basic clamshell package. The back outlined what each tool was for. It answered the questions about if the can opener and bottle opener were supposed to be screwdrivers. They clearly are not. The tool list shows there are only 2 screwdrivers; a #1 phillips and a small flat head called a "jewelery driver". I guess this is fine, because of the 1/4" bit holder. I placed a bit into the holder and it feels more secure than say the PowerPlay bit holder did. Then I noticed the magnet protrudes somewhat and that is why it feels more secure. I squeezed very tight and the magnet didn't budge. Only time and use will tell if that is intentional or not. You'll have to carry a bit or two in your pocket for bigger screws.<br />
Onto the tools. There seems like a lot packed in this this mightly little pocket SOG.<br />
The scissors are a notable departure from typical SOG scissors. The spring for the scissors disengage when you depress the lock. Not the most solid feeling scissors in the world, but we'll see if they hold up in time. They do cut thin card stock and toilet paper out of the box. So, that is good.<br />
Can and bottle openers looks well formed and the can opener is mildly sharpened on the puncture side.<br />
The #1 phillips is well formed and would possibly work on #2 phillips that weren't too tightly screwed in.<br />
The hook cutter is a cheaper smaller type of SOG V-Cutter. And the one on this Pint is sharp. Good for paracord? Not sure it is necessary since the Pint has two blade.<br />
Both the plain and serrated blades are very sharp and well formed. The serrated blade had some light burring on the edge. One stroke on my honing stone took care of that.<br />
The awl is wiked sharp and looks like it would make a nice hole in whatever you need to put a hole in.<br />
Last tool is the "file". In keeping with SOG's tradition, this file is only useful for fingernails. About the same cut quality as the Access series. No surprise there.<br />
The plier jaws are well formed and nicely cut with no play. Cutter portion works well too.</p>
<p dir="auto">The tool locks can only be reliably depressed by opening the handles part way and pressing the back of the handle. The lock bars are the black portion of the handle.</p>
<p dir="auto">Overall initial feeling:<br />
This overview only covers the PowerPint I received. We'll need more imput, comments  and usage before a review can be written.</p>
<p dir="auto">I like it so far. It is a lot of function in a mighty little tool. Only time will tell how reliable and useful it is.<br />
Pics to follow.</p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/371730_20180507_110503-1-1.jpeg" alt="20180507_110503-1-1.jpeg" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/371732_20180507_110713-1.jpeg" alt="20180507_110713-1.jpeg" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/371734_20180507_110900-1.jpeg" alt="20180507_110900-1.jpeg" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/371736_20180507_110916.jpeg" alt="20180507_110916.jpeg" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/topic/77214/powerpint-overview-mighty-little-mt</link><generator>RSS for Node</generator><lastBuildDate>Mon, 16 Nov 2026 00:24:09 GMT</lastBuildDate><atom:link href="https://multitool.ninja/topic/77214.rss" rel="self" type="application/rss+xml"/><pubDate>Mon, 07 May 2018 16:54:49 GMT</pubDate><ttl>60</ttl><item><title><![CDATA[Reply to PowerPint Overview Mighty Little MT on Thu, 29 Oct 2026 17:46:27 GMT]]></title><description><![CDATA[<p dir="auto">Great use today Antti. I will need to remember that cutter is good on zip ties. <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
<p dir="auto">JonesE</p>
]]></description><link>https://multitool.ninja/post/2592425</link><guid isPermaLink="true">https://multitool.ninja/post/2592425</guid><dc:creator><![CDATA[JonesE]]></dc:creator><pubDate>Thu, 29 Oct 2026 17:46:27 GMT</pubDate></item><item><title><![CDATA[Reply to PowerPint Overview Mighty Little MT on Thu, 29 Oct 2026 17:30:56 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/magentus" aria-label="Profile: magentus">@<bdi>magentus</bdi></a> <a href="/post/2592388">said</a>:<br />
Cool. Stick with it Antti - it's very capable for its size -I really enjoyed mine and I think Kirky is enjoying it now</p>
</blockquote>
<p dir="auto">Very much so! Give it a fair shake. It's no Vic Spirit, but its still a handy wee thing</p>
]]></description><link>https://multitool.ninja/post/2592424</link><guid isPermaLink="true">https://multitool.ninja/post/2592424</guid><dc:creator><![CDATA[kirk13]]></dc:creator><pubDate>Thu, 29 Oct 2026 17:30:56 GMT</pubDate></item><item><title><![CDATA[Reply to PowerPint Overview Mighty Little MT on Thu, 29 Oct 2026 16:17:29 GMT]]></title><description><![CDATA[<p dir="auto">Today carried PowerPint at work and gotta say hook cutter cuts zipties like champ</p>
<p dir="auto">[attach id=0 msg=2592406]</p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/608492_IMG_20261029_181331.jpg" alt="IMG_20261029_181331.jpg" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/2592406</link><guid isPermaLink="true">https://multitool.ninja/post/2592406</guid><dc:creator><![CDATA[Antti Lammi]]></dc:creator><pubDate>Thu, 29 Oct 2026 16:17:29 GMT</pubDate></item><item><title><![CDATA[Reply to PowerPint Overview Mighty Little MT on Thu, 29 Oct 2026 10:30:24 GMT]]></title><description><![CDATA[<p dir="auto">Cool. Stick with it Antti - it's very capable for its size -I really enjoyed mine and I think Kirky is enjoying it now</p>
]]></description><link>https://multitool.ninja/post/2592388</link><guid isPermaLink="true">https://multitool.ninja/post/2592388</guid><dc:creator><![CDATA[magentus]]></dc:creator><pubDate>Thu, 29 Oct 2026 10:30:24 GMT</pubDate></item><item><title><![CDATA[Reply to PowerPint Overview Mighty Little MT on Wed, 28 Oct 2026 19:50:28 GMT]]></title><description><![CDATA[<p dir="auto">Congrats on the new tool Antti. I think you will like it. It is a great size and with a few tweaks here and there it gets better. I will try and carry mine next week.</p>
<p dir="auto">JonesE</p>
]]></description><link>https://multitool.ninja/post/2592355</link><guid isPermaLink="true">https://multitool.ninja/post/2592355</guid><dc:creator><![CDATA[JonesE]]></dc:creator><pubDate>Wed, 28 Oct 2026 19:50:28 GMT</pubDate></item><item><title><![CDATA[Reply to PowerPint Overview Mighty Little MT on Wed, 28 Oct 2026 17:28:30 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto">@Antti Lammi <a href="/post/2592345">said</a>:<br />
Received today my first SOG and its PowerPint, its much smaller than i tought but still neat little tool.<br />
There are few things that noticed while playing with it like can opener doesnt have flathead like usually like other brands does, that you need to open pliers to release tool from lock and like others have said that scissors arent best but overall its cool to own.<br />
I will try to carry this tool someday to see how good it is</p>
<p dir="auto">[attach id=0 msg=2592345]</p>
</blockquote>
<p dir="auto">Nice choice.<br />
I really like mine, too   seems that in this day and age companies could figure out how to make a simple pair of scissors work.</p>
]]></description><link>https://multitool.ninja/post/2592347</link><guid isPermaLink="true">https://multitool.ninja/post/2592347</guid><dc:creator><![CDATA[PitCarver]]></dc:creator><pubDate>Wed, 28 Oct 2026 17:28:30 GMT</pubDate></item><item><title><![CDATA[Reply to PowerPint Overview Mighty Little MT on Wed, 28 Oct 2026 16:33:38 GMT]]></title><description><![CDATA[<p dir="auto">Received today my first SOG and its PowerPint, its much smaller than i tought but still neat little tool.<br />
There are few things that noticed while playing with it like can opener doesnt have flathead like usually like other brands does, that you need to open pliers to release tool from lock and like others have said that scissors arent best but overall its cool to own.<br />
I will try to carry this tool someday to see how good it is</p>
<p dir="auto">[attach id=0 msg=2592345]</p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/608462_IMG_20261028_180613.jpg" alt="IMG_20261028_180613.jpg" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/2592345</link><guid isPermaLink="true">https://multitool.ninja/post/2592345</guid><dc:creator><![CDATA[Antti Lammi]]></dc:creator><pubDate>Wed, 28 Oct 2026 16:33:38 GMT</pubDate></item><item><title><![CDATA[Reply to PowerPint Overview Mighty Little MT on Sat, 19 Sep 2026 18:17:35 GMT]]></title><description><![CDATA[<p dir="auto">Thank you for sharing your PowerPint mods smiller43147. The Philips mod is very unique. Way to go on making your PowerPint work for you.  <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
<p dir="auto">JonesE</p>
]]></description><link>https://multitool.ninja/post/2588310</link><guid isPermaLink="true">https://multitool.ninja/post/2588310</guid><dc:creator><![CDATA[JonesE]]></dc:creator><pubDate>Sat, 19 Sep 2026 18:17:35 GMT</pubDate></item><item><title><![CDATA[Reply to PowerPint Overview Mighty Little MT on Sat, 19 Sep 2026 01:17:04 GMT]]></title><description><![CDATA[<p dir="auto">My needs in a MT are: pliers, 1/4" flat driver, #2 Phillips, knife, scissors.<br />
The PowerPint comes up short on the two drivers.  So I ground the end of the file for the flat driver.<br />
Still missing the #2 Phillips.<br />
I removed the can opener, bottle opener, and the little eyeglass driver.<br />
I took a 2 inch #2 Phillips 1/4 hex bit, softened the steel with a propane torch so I could drill a hole in it.<br />
It sticks out of the side a little, that could be fixed by shortening it a little.</p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/606610_IMG_0443.jpg" alt="IMG_0443.jpg" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/606611_IMG_0444.jpg" alt="IMG_0444.jpg" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/2588268</link><guid isPermaLink="true">https://multitool.ninja/post/2588268</guid><dc:creator><![CDATA[smiller43147]]></dc:creator><pubDate>Sat, 19 Sep 2026 01:17:04 GMT</pubDate></item><item><title><![CDATA[Reply to PowerPint Overview Mighty Little MT on Thu, 13 Aug 2026 22:13:04 GMT]]></title><description><![CDATA[<p dir="auto">The four implements I would change for better ones are: 1. The awl, I want it a little longer and the fact that they cut a portion away at the tip bothers me. 2. The scissors, Mine never could really cut anything. They would jam up if you cut parachord. This one deserves a good rethink. 3. The can opener, the edge needs to be sharpened to actually cut into a can and the little nub should be ground straight and skinnied down to actually be usable as a small flat driver. 4.  The bottle opener, the end should be squared off so you can actually use it as a large flat driver.</p>
<p dir="auto">The last two, a user could simply mod themselves. The first two would take some figuring out.</p>
<p dir="auto">I really like the tool and they go a lot right with it. For the average user, if they fixed the scissors it would be a home run.</p>
<p dir="auto">JonesE</p>
]]></description><link>https://multitool.ninja/post/2584640</link><guid isPermaLink="true">https://multitool.ninja/post/2584640</guid><dc:creator><![CDATA[JonesE]]></dc:creator><pubDate>Thu, 13 Aug 2026 22:13:04 GMT</pubDate></item><item><title><![CDATA[Reply to PowerPint Overview Mighty Little MT on Thu, 13 Aug 2026 20:52:47 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/jonese" aria-label="Profile: JonesE">@<bdi>JonesE</bdi></a> <a href="/post/2584631">said</a>:<br />
Thanks Mags, I have often thought of dropping in other implements in place of the stock ones. One of the things holding me back has been the plier jaws when folded closed. Every implement has to fit a certain way to clear the jaw. The other thing is once you got the new tool fitted and everything clears, how do you access it? Essentially, where do you place the nail nick.  <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
<p dir="auto">JonesE</p>
</blockquote>
<p dir="auto">Yes, I see what you're saying - it's a very precise setup isn't it.<br />
I quite like that the nail nick problem is solved with the protruding tab of the Gerber driver. It works for me even though it disrupts the silhouette somewhat.</p>
<p dir="auto">What tools would you like to replace and what would you replace then with?</p>
]]></description><link>https://multitool.ninja/post/2584634</link><guid isPermaLink="true">https://multitool.ninja/post/2584634</guid><dc:creator><![CDATA[magentus]]></dc:creator><pubDate>Thu, 13 Aug 2026 20:52:47 GMT</pubDate></item><item><title><![CDATA[Reply to PowerPint Overview Mighty Little MT on Thu, 13 Aug 2026 20:27:41 GMT]]></title><description><![CDATA[<p dir="auto">Thanks Mags, I have often thought of dropping in other implements in place of the stock ones. One of the things holding me back has been the plier jaws when folded closed. Every implement has to fit a certain way to clear the jaw. The other thing is once you got the new tool fitted and everything clears, how do you access it? Essentially, where do you place the nail nick.  <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
<p dir="auto">JonesE</p>
]]></description><link>https://multitool.ninja/post/2584631</link><guid isPermaLink="true">https://multitool.ninja/post/2584631</guid><dc:creator><![CDATA[JonesE]]></dc:creator><pubDate>Thu, 13 Aug 2026 20:27:41 GMT</pubDate></item><item><title><![CDATA[Reply to PowerPint Overview Mighty Little MT on Thu, 13 Aug 2026 18:27:48 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/nakken" aria-label="Profile: nakken">@<bdi>nakken</bdi></a> <a href="/post/2584609">said</a>:<br />
Would you look at that! Nicely done mate <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">Thanks nakken - I'm fortunate to have a couple of spare Gerber parts</p>
]]></description><link>https://multitool.ninja/post/2584614</link><guid isPermaLink="true">https://multitool.ninja/post/2584614</guid><dc:creator><![CDATA[magentus]]></dc:creator><pubDate>Thu, 13 Aug 2026 18:27:48 GMT</pubDate></item><item><title><![CDATA[Reply to PowerPint Overview Mighty Little MT on Thu, 13 Aug 2026 18:14:28 GMT]]></title><description><![CDATA[<p dir="auto">Would you look at that! Nicely done mate <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/2584609</link><guid isPermaLink="true">https://multitool.ninja/post/2584609</guid><dc:creator><![CDATA[nakken]]></dc:creator><pubDate>Thu, 13 Aug 2026 18:14:28 GMT</pubDate></item><item><title><![CDATA[Reply to PowerPint Overview Mighty Little MT on Thu, 13 Aug 2026 18:23:47 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/jonese" aria-label="Profile: JonesE">@<bdi>JonesE</bdi></a> <a href="/post/2584604">said</a>:<br />
Mags, good job on keeping your PowerPint going. Sucks your spring arm broke. Hopefully, the one on the other side still works. Good job on replacing the broken driver with the Gerber one. Could you share more about it when you get a chance.  <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /></p>
<p dir="auto">JonesE</p>
</blockquote>
<p dir="auto">Thanks JonesE . The broken spring doesn't seem to affect the functionality much, though I guess there's more pressure on the remaining one so we'll see how long it lasts</p>
<p dir="auto">As for fitting the replacement driver, it's from a Gerber 400/600. It drops in nicely with only a little lateral movement. With some fettling on the slot it locks as well.</p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/605200_20260813_184516.jpg" alt="20260813_184516.jpg" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/605201_20260813_184534.jpg" alt="20260813_184534.jpg" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/605202_20260813_184544.jpg" alt="20260813_184544.jpg" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/2584606</link><guid isPermaLink="true">https://multitool.ninja/post/2584606</guid><dc:creator><![CDATA[magentus]]></dc:creator><pubDate>Thu, 13 Aug 2026 18:23:47 GMT</pubDate></item><item><title><![CDATA[Reply to PowerPint Overview Mighty Little MT on Thu, 13 Aug 2026 17:41:48 GMT]]></title><description><![CDATA[<p dir="auto">Mags, good job on keeping your PowerPint going. Sucks your spring arm broke. Hopefully, the one on the other side still works. Good job on replacing the broken driver with the Gerber one. Could you share more about it when you get a chance.  <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /></p>
<p dir="auto">JonesE</p>
]]></description><link>https://multitool.ninja/post/2584604</link><guid isPermaLink="true">https://multitool.ninja/post/2584604</guid><dc:creator><![CDATA[JonesE]]></dc:creator><pubDate>Thu, 13 Aug 2026 17:41:48 GMT</pubDate></item><item><title><![CDATA[Reply to PowerPint Overview Mighty Little MT on Thu, 13 Aug 2026 13:40:17 GMT]]></title><description><![CDATA[<p dir="auto">Those with keen vision (or reading skillz) will notice the broken spring by the serrated blade and the Gerber driver replacing the broken fine slotted driver. All injuries sustained in the line of duty</p>
]]></description><link>https://multitool.ninja/post/2584566</link><guid isPermaLink="true">https://multitool.ninja/post/2584566</guid><dc:creator><![CDATA[magentus]]></dc:creator><pubDate>Thu, 13 Aug 2026 13:40:17 GMT</pubDate></item><item><title><![CDATA[Reply to PowerPint Overview Mighty Little MT on Thu, 13 Aug 2026 13:37:48 GMT]]></title><description><![CDATA[<p dir="auto">Brought my PP in to work today ready for BO Friday tomoz</p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/605188_20260813_143029.jpg" alt="20260813_143029.jpg" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/2584565</link><guid isPermaLink="true">https://multitool.ninja/post/2584565</guid><dc:creator><![CDATA[magentus]]></dc:creator><pubDate>Thu, 13 Aug 2026 13:37:48 GMT</pubDate></item><item><title><![CDATA[Reply to PowerPint Overview Mighty Little MT on Mon, 13 Jul 2026 02:51:20 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto">@pa_strunk <a href="/post/2580004">said</a>:<br />
Wish I would have took some pic before soldering, but I was not 100% sure I could pull it off. Basically cut the SOG scissors at the base of the lower scissor blade leaving two parallel supports. Then I used a Dremel to open the gap a bit and put in the base of the Victorinox scissors from a donor tool. Took a lot of measurements and attempts, but after my 3rd try it fit perfectly.</p>
</blockquote>
<p dir="auto">Lovely work!</p>
]]></description><link>https://multitool.ninja/post/2580102</link><guid isPermaLink="true">https://multitool.ninja/post/2580102</guid><dc:creator><![CDATA[magentus]]></dc:creator><pubDate>Mon, 13 Jul 2026 02:51:20 GMT</pubDate></item><item><title><![CDATA[Reply to PowerPint Overview Mighty Little MT on Sun, 12 Jul 2026 17:28:13 GMT]]></title><description><![CDATA[<p dir="auto">That looks fantastic pa_strunk!  <img src="/assets/uploads/smileys/like-sign.gif" alt=":like:" title="I like this" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/like-sign.gif" alt=":like:" title="I like this" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/like-sign.gif" alt=":like:" title="I like this" class="forum-smiley emoji" /></p>
<p dir="auto">I have a spare pair of Vic tweezers. I am going to borrow your idea of incorporating the into the PowerPint. They are handy for pulling metal slivers.</p>
<p dir="auto">JonesE</p>
]]></description><link>https://multitool.ninja/post/2580040</link><guid isPermaLink="true">https://multitool.ninja/post/2580040</guid><dc:creator><![CDATA[JonesE]]></dc:creator><pubDate>Sun, 12 Jul 2026 17:28:13 GMT</pubDate></item><item><title><![CDATA[Reply to PowerPint Overview Mighty Little MT on Sun, 12 Jul 2026 13:47:48 GMT]]></title><description><![CDATA[<p dir="auto">Here is a closeup of the Victorinox tweezers sitting below serrated blade. Do not interfere with function at all.</p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/603452_IMG_0120.jpg" alt="IMG_0120.jpg" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/2580007</link><guid isPermaLink="true">https://multitool.ninja/post/2580007</guid><dc:creator><![CDATA[pa_strunk]]></dc:creator><pubDate>Sun, 12 Jul 2026 13:47:48 GMT</pubDate></item><item><title><![CDATA[Reply to PowerPint Overview Mighty Little MT on Sun, 12 Jul 2026 13:40:07 GMT]]></title><description><![CDATA[<p dir="auto">Wish I would have took some pic before soldering, but I was not 100% sure I could pull it off. Basically cut the SOG scissors at the base of the lower scissor blade leaving two parallel supports. Then I used a Dremel to open the gap a bit and put in the base of the Victorinox scissors from a donor tool. Took a lot of measurements and attempts, but after my 3rd try it fit perfectly.</p>
]]></description><link>https://multitool.ninja/post/2580004</link><guid isPermaLink="true">https://multitool.ninja/post/2580004</guid><dc:creator><![CDATA[pa_strunk]]></dc:creator><pubDate>Sun, 12 Jul 2026 13:40:07 GMT</pubDate></item><item><title><![CDATA[Reply to PowerPint Overview Mighty Little MT on Sun, 12 Jul 2026 06:07:08 GMT]]></title><description><![CDATA[<p dir="auto">Nice mod pa. How did you go about that? Vic scissors on a Powerpint really levels it up!</p>
]]></description><link>https://multitool.ninja/post/2579941</link><guid isPermaLink="true">https://multitool.ninja/post/2579941</guid><dc:creator><![CDATA[magentus]]></dc:creator><pubDate>Sun, 12 Jul 2026 06:07:08 GMT</pubDate></item><item><title><![CDATA[Reply to PowerPint Overview Mighty Little MT on Sun, 12 Jul 2026 01:35:29 GMT]]></title><description><![CDATA[<p dir="auto">Have not posted much in a while, but I finally decided to replace the scissors on one of my PowerPints. Work great. Also has a few finger tabs and  Victorinox tweezers hidden under serrated blade.</p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/603411_IMG_0115.jpg" alt="IMG_0115.jpg" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/603412_IMG_0116.jpg" alt="IMG_0116.jpg" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/603413_IMG_0117.jpg" alt="IMG_0117.jpg" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/2579906</link><guid isPermaLink="true">https://multitool.ninja/post/2579906</guid><dc:creator><![CDATA[pa_strunk]]></dc:creator><pubDate>Sun, 12 Jul 2026 01:35:29 GMT</pubDate></item></channel></rss>