<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0"><channel><title><![CDATA[Ulu (Uluit)]]></title><description><![CDATA[<p dir="auto">We had the beginnings of an Uluit thread here way back when, but it ran dry. So I thought I'd just start a new one, instead of going all Dr Frankenstein on the older one.</p>
<p dir="auto"><img src="https://cdn3.volusion.com/fmqfs.furvz/v/vspfiles/photos/ULUUMIALIK-2.jpg?1462535080" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">The Ulu is a multitool that keeps popping up into my filed of view. I continue to be intrigued by this design, and the idea that it could be a multitool that is easier to use with mittens.</p>
<p dir="auto">When I was a younger man, my hands seemed to be impervious to the cold, but after a few episodes of mild frostbite, old-man Winter seems to bit harder. So gloves, if not mittens seem to be the order of the Winter day for me.</p>
<p dir="auto">While most fix blades do just fine for me, there is something about the way an Ulu is used that makes it seem particularly mitten friendly. No coincidence that this style of knife got developed and is still popular in Northern latitudes.</p>
<p dir="auto">In addition, I've seen western cooks and chuckwagon cooks refer to using a "hash knife" out on the trail. These "hash knives" seem, to me, to be a variation of the Ulu. They also seem fairly useful.</p>
<p dir="auto">A few years ago Outback in Idaho was considering getting one of these (Did you?) and a couple other forum members had some limited experience. I'm curious if anybody else has had any experience with these intriguing knives (Uluit). I see some potential here, but am just not sure to what extent I'd really use one.</p>
<p dir="auto">Who has experience with an Ulu?</p>
]]></description><link>https://multitool.ninja/topic/79901/ulu-uluit</link><generator>RSS for Node</generator><lastBuildDate>Wed, 18 Nov 2026 19:55:41 GMT</lastBuildDate><atom:link href="https://multitool.ninja/topic/79901.rss" rel="self" type="application/rss+xml"/><pubDate>Thu, 06 Dec 2018 21:05:14 GMT</pubDate><ttl>60</ttl><item><title><![CDATA[Reply to Ulu (Uluit) on Sun, 23 Dec 2018 20:55:08 GMT]]></title><description><![CDATA[<p dir="auto">I love a good heist!</p>
<p dir="auto">Sent fra min FRD-L09 via Tapatalk</p>
]]></description><link>https://multitool.ninja/post/1835509</link><guid isPermaLink="true">https://multitool.ninja/post/1835509</guid><dc:creator><![CDATA[RF52]]></dc:creator><pubDate>Sun, 23 Dec 2018 20:55:08 GMT</pubDate></item><item><title><![CDATA[Reply to Ulu (Uluit) on Sun, 23 Dec 2018 20:45:40 GMT]]></title><description><![CDATA[<p dir="auto">oh a heist! fun</p>
]]></description><link>https://multitool.ninja/post/1835502</link><guid isPermaLink="true">https://multitool.ninja/post/1835502</guid><dc:creator><![CDATA[styx]]></dc:creator><pubDate>Sun, 23 Dec 2018 20:45:40 GMT</pubDate></item><item><title><![CDATA[Reply to Ulu (Uluit) on Sun, 23 Dec 2018 19:30:59 GMT]]></title><description><![CDATA[<p dir="auto">Rob March to pay February? Yeah, I can do that!   <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1835426</link><guid isPermaLink="true">https://multitool.ninja/post/1835426</guid><dc:creator><![CDATA[Nix]]></dc:creator><pubDate>Sun, 23 Dec 2018 19:30:59 GMT</pubDate></item><item><title><![CDATA[Reply to Ulu (Uluit) on Sun, 23 Dec 2018 19:15:54 GMT]]></title><description><![CDATA[<p dir="auto">you might need to borrow a day or 2 from march</p>
]]></description><link>https://multitool.ninja/post/1835416</link><guid isPermaLink="true">https://multitool.ninja/post/1835416</guid><dc:creator><![CDATA[styx]]></dc:creator><pubDate>Sun, 23 Dec 2018 19:15:54 GMT</pubDate></item><item><title><![CDATA[Reply to Ulu (Uluit) on Sun, 23 Dec 2018 17:06:23 GMT]]></title><description><![CDATA[<p dir="auto">I think you are right.</p>
<p dir="auto">I'm going to do a 30-day challenge with the Ulu in February. You are welcome to join in!</p>
]]></description><link>https://multitool.ninja/post/1835316</link><guid isPermaLink="true">https://multitool.ninja/post/1835316</guid><dc:creator><![CDATA[Nix]]></dc:creator><pubDate>Sun, 23 Dec 2018 17:06:23 GMT</pubDate></item><item><title><![CDATA[Reply to Ulu (Uluit) on Sun, 23 Dec 2018 17:04:57 GMT]]></title><description><![CDATA[<p dir="auto">Good review of the KOA Ulu Nix.   <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" />    I'm tempted to get one of those. With the more curved blade of the KOA it probably works better field dressing  Moose and Bear than the kitchen. Of course that is just an opinion from observation not from actual experience with the KOA Ulu........ yet.    :D</p>
]]></description><link>https://multitool.ninja/post/1835313</link><guid isPermaLink="true">https://multitool.ninja/post/1835313</guid><dc:creator><![CDATA[David]]></dc:creator><pubDate>Sun, 23 Dec 2018 17:04:57 GMT</pubDate></item><item><title><![CDATA[Reply to Ulu (Uluit) on Sun, 16 Dec 2018 15:32:55 GMT]]></title><description><![CDATA[<p dir="auto"><img src="/assets/uploads/smileys/rofl.gif" alt=":rofl:" title="rofl" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1830073</link><guid isPermaLink="true">https://multitool.ninja/post/1830073</guid><dc:creator><![CDATA[Nix]]></dc:creator><pubDate>Sun, 16 Dec 2018 15:32:55 GMT</pubDate></item><item><title><![CDATA[Reply to Ulu (Uluit) on Sun, 16 Dec 2018 14:20:15 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/styx" aria-label="Profile: styx">@<bdi>styx</bdi></a> <a href="/post/1829853">said</a>:<br />
good looking soup. so it has a learning curve</p>
</blockquote>
<p dir="auto">In a round about way.</p>
]]></description><link>https://multitool.ninja/post/1829987</link><guid isPermaLink="true">https://multitool.ninja/post/1829987</guid><dc:creator><![CDATA[Aloha]]></dc:creator><pubDate>Sun, 16 Dec 2018 14:20:15 GMT</pubDate></item><item><title><![CDATA[Reply to Ulu (Uluit) on Sun, 16 Dec 2018 09:47:04 GMT]]></title><description><![CDATA[<p dir="auto">good looking soup. so it has a learning curve</p>
]]></description><link>https://multitool.ninja/post/1829853</link><guid isPermaLink="true">https://multitool.ninja/post/1829853</guid><dc:creator><![CDATA[styx]]></dc:creator><pubDate>Sun, 16 Dec 2018 09:47:04 GMT</pubDate></item><item><title><![CDATA[Reply to Ulu (Uluit) on Sun, 16 Dec 2018 06:31:52 GMT]]></title><description><![CDATA[<p dir="auto">Just now catching up with this thread.  Nice KOA Ulu.  Looks like it would take some getting used to but you did a great job and the soup looks wonderful.</p>
]]></description><link>https://multitool.ninja/post/1829832</link><guid isPermaLink="true">https://multitool.ninja/post/1829832</guid><dc:creator><![CDATA[Aloha]]></dc:creator><pubDate>Sun, 16 Dec 2018 06:31:52 GMT</pubDate></item><item><title><![CDATA[Reply to Ulu (Uluit) on Sat, 15 Dec 2018 23:01:34 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/stevec" aria-label="Profile: SteveC">@<bdi>SteveC</bdi></a> <a href="/post/1829611">said</a>:<br />
I have a bunch of old hand saws that would be perfect to make some out of.</p>
</blockquote>
<p dir="auto">That's what I'm thinking.   <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
<p dir="auto">Pawn shop run next week!   <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1829626</link><guid isPermaLink="true">https://multitool.ninja/post/1829626</guid><dc:creator><![CDATA[Nix]]></dc:creator><pubDate>Sat, 15 Dec 2018 23:01:34 GMT</pubDate></item><item><title><![CDATA[Reply to Ulu (Uluit) on Sat, 15 Dec 2018 23:00:37 GMT]]></title><description><![CDATA[<p dir="auto">I used the Ulu today to make "Pantry Minestrone". This is a soup I make where I raid the pantry and fridge for various ingredients and leftovers to make a Minestrone-inspired soup.</p>
<p dir="auto">First, I've been using a classic chef's knife, 8"-10", for year and years. I can use one blindfolded. So switching to a small Ulu was really strange. And felt a wee bit dangerous at times.</p>
<p dir="auto">The Ulu is a very instinctive knife to use, at times it almost feels primal, like using a sharp shard of obsidian, but after using a chef's knife for several decades, the Ulu is also foreign. As a result, I was fairly slow and a bit clumsy with this knife. I guess time will tell if I develop better skills and a bit more speed.</p>
<p dir="auto">First up, mushrooms:</p>
<p dir="auto"><img src="https://i.imgur.com/Ln47mFQ.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">This Ulu is sharp! it cut through these 'shrooms with ease. My cuts were not consistent and I ended up with some significant variations. For this 'rustic' soup, that was just fine.</p>
<p dir="auto">Next, carrots:</p>
<p dir="auto"><img src="https://i.imgur.com/KXJ1tyQ.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">I tried breaking down the carrots by splitting them lengthwise. This was tricky. The asymmetric edge grind led the knife to veer off from a straight cut. With a chef's knife, this is an easy task. I really had to focus and play with the cutting angle to get a clean split. Once split, dicing was easy. I used a simple rocking motion to effect the dice.</p>
<p dir="auto">Celery:</p>
<p dir="auto"><img src="https://i.imgur.com/UkhD2ML.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">I felt my skill-set improving here and I did a bit better cutting the celery lengthwise into strips. Again a simple push cut and rocking motion completed the dice. I felt a bit faster here, too.</p>
<p dir="auto">Onion:</p>
<p dir="auto"><img src="https://i.imgur.com/62SrMvG.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Here the problem was "big onion, small knife". Rough chopping an onion with a chef's knife is a simple and quick task for me. This was trickier. You can see that in the end I essentially used the Ulu to split the onion. Here I wished I had a bigger Ulu.</p>
<p dir="auto">Once split, however, the Ulu did a good job slicing the onion.</p>
<p dir="auto"><img src="https://i.imgur.com/avcZyKb.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">I then used it crosswise to effect a nice chop.  Here again, I stacked up the slices, used a push cut and rocking motion to complete the cut. It worked well, and I felt myself getting faster with practice. However, I'm used to using the side of a chef's knife to guide the knife and protect my fingers. That seemed trickier to do with this small Ulu and at least once I came close to nicking a finger. Maybe twice.  ;)  Lesson learned (I hope).</p>
<p dir="auto">Lastly, I cut up some Italian sausage:</p>
<p dir="auto"><img src="https://i.imgur.com/wIrJEmg.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">I used the Ulu to remove the casing, split the sausages, and then chop them into 1/2" pieces. The Ulu did a great job wit this. Again, I use a push cut to start the chop, then a rocking motion to complete the cut. Worked well and was reasonably fast.</p>
<p dir="auto">After all that work, I cleaned the Ulu and wiped it dry. I tested the Ulu on my leg and it was still shaving sharp. While the materials I cut, e.g. mushrooms or sausage, aren't hard on an edge, I was cutting for a long time against a wooden cutting board (plastic for the sausage). I was pretty happy to see that the D2 steel had held a nice sharp edge.</p>
<p dir="auto">Here's the soup simmering away:</p>
<p dir="auto"><img src="https://i.imgur.com/ZyvMu45.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Thanks to the Ulu, dinner is looking pretty good!   <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1829625</link><guid isPermaLink="true">https://multitool.ninja/post/1829625</guid><dc:creator><![CDATA[Nix]]></dc:creator><pubDate>Sat, 15 Dec 2018 23:00:37 GMT</pubDate></item><item><title><![CDATA[Reply to Ulu (Uluit) on Sat, 15 Dec 2018 22:45:37 GMT]]></title><description><![CDATA[<p dir="auto">I have a bunch of old hand saws that would be perfect to make some out of.</p>
]]></description><link>https://multitool.ninja/post/1829611</link><guid isPermaLink="true">https://multitool.ninja/post/1829611</guid><dc:creator><![CDATA[SteveC]]></dc:creator><pubDate>Sat, 15 Dec 2018 22:45:37 GMT</pubDate></item><item><title><![CDATA[Reply to Ulu (Uluit) on Sat, 15 Dec 2018 22:35:39 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/zoidberg" aria-label="Profile: zoidberg">@<bdi>zoidberg</bdi></a> <a href="/post/1829520">said</a>:<br />
I am tempted to make a few. Will keep a look out for materials.</p>
</blockquote>
<p dir="auto">Me too.  <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1829600</link><guid isPermaLink="true">https://multitool.ninja/post/1829600</guid><dc:creator><![CDATA[Nix]]></dc:creator><pubDate>Sat, 15 Dec 2018 22:35:39 GMT</pubDate></item><item><title><![CDATA[Reply to Ulu (Uluit) on Sat, 15 Dec 2018 20:29:14 GMT]]></title><description><![CDATA[<p dir="auto">I am tempted to make a few. Will keep a look out for materials.</p>
]]></description><link>https://multitool.ninja/post/1829520</link><guid isPermaLink="true">https://multitool.ninja/post/1829520</guid><dc:creator><![CDATA[zoidberg]]></dc:creator><pubDate>Sat, 15 Dec 2018 20:29:14 GMT</pubDate></item><item><title><![CDATA[Reply to Ulu (Uluit) on Sat, 15 Dec 2018 19:59:24 GMT]]></title><description><![CDATA[<p dir="auto">I think I' going to do a 30-day challenge with it. (After the SwissChamp challenge. #becauseSAK)</p>
]]></description><link>https://multitool.ninja/post/1829507</link><guid isPermaLink="true">https://multitool.ninja/post/1829507</guid><dc:creator><![CDATA[Nix]]></dc:creator><pubDate>Sat, 15 Dec 2018 19:59:24 GMT</pubDate></item><item><title><![CDATA[Reply to Ulu (Uluit) on Sat, 15 Dec 2018 19:57:27 GMT]]></title><description><![CDATA[<p dir="auto">well I'm still stuck on how the Grohmann #1 is a great all around design, so this has me entirely stumped. will be interesting to see your experiences with it</p>
]]></description><link>https://multitool.ninja/post/1829502</link><guid isPermaLink="true">https://multitool.ninja/post/1829502</guid><dc:creator><![CDATA[styx]]></dc:creator><pubDate>Sat, 15 Dec 2018 19:57:27 GMT</pubDate></item><item><title><![CDATA[Reply to Ulu (Uluit) on Sat, 15 Dec 2018 18:24:20 GMT]]></title><description><![CDATA[<p dir="auto">This one is not........</p>
<p dir="auto"><img src="https://i.imgur.com/40R8YaV.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">My new Ulu arrived today, made in the USA (Texas?) by Knives of Alaska. The steel is D2, the brass riveted handle is made from 'Santoprene', a molded plastic with a slight elastic quality. In the sheath, the whole package is about 4.25" x 4.5". The 'blade length' along the curve is about 4.5".</p>
<p dir="auto">The edge is a traditional chisels grind. As it came from KOA, it is hair-popping sharp. 'Traditional' may be inaccurate, since some Ulu are made with symmetric two-sided V-grinds, but it's my impression that the chisel grind is more common.</p>
<p dir="auto">Right away it feels like a very instinctive knife to use. Because this Ulu is symmetrical in shape, I can be used left handed or right handed or the bevel can be switched to suit the cutting task.</p>
<p dir="auto">Last comment here, the sheath (also made in USA) is a very high quality sheath. I'm going to go treat the sheath with some pitch blend and see how it carries on the belt!</p>
]]></description><link>https://multitool.ninja/post/1829435</link><guid isPermaLink="true">https://multitool.ninja/post/1829435</guid><dc:creator><![CDATA[Nix]]></dc:creator><pubDate>Sat, 15 Dec 2018 18:24:20 GMT</pubDate></item><item><title><![CDATA[Reply to Ulu (Uluit) on Sat, 15 Dec 2018 11:53:52 GMT]]></title><description><![CDATA[<p dir="auto">those are some big ulus</p>
]]></description><link>https://multitool.ninja/post/1829158</link><guid isPermaLink="true">https://multitool.ninja/post/1829158</guid><dc:creator><![CDATA[styx]]></dc:creator><pubDate>Sat, 15 Dec 2018 11:53:52 GMT</pubDate></item><item><title><![CDATA[Reply to Ulu (Uluit) on Thu, 13 Dec 2018 16:10:11 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/stevec" aria-label="Profile: SteveC">@<bdi>SteveC</bdi></a> <a href="/post/1827428">said</a>:<br />
<a href="https://www.youtube.com/watch?v=d3QoYxy5bZA" rel="nofollow ugc">https://www.youtube.com/watch?v=d3QoYxy5bZA</a></p>
</blockquote>
<p dir="auto">Couldn't see the vid... Now I can...</p>
<p dir="auto"><img src="/assets/uploads/smileys/thinking.gif" alt=":think:" title="Thinking" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/thinking.gif" alt=":think:" title="Thinking" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1827881</link><guid isPermaLink="true">https://multitool.ninja/post/1827881</guid><dc:creator><![CDATA[pfrsantos]]></dc:creator><pubDate>Thu, 13 Dec 2018 16:10:11 GMT</pubDate></item><item><title><![CDATA[Reply to Ulu (Uluit) on Thu, 13 Dec 2018 00:22:03 GMT]]></title><description><![CDATA[<p dir="auto"><img src="/assets/uploads/smileys/like-sign.gif" alt=":like:" title="I like this" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1827429</link><guid isPermaLink="true">https://multitool.ninja/post/1827429</guid><dc:creator><![CDATA[Nix]]></dc:creator><pubDate>Thu, 13 Dec 2018 00:22:03 GMT</pubDate></item><item><title><![CDATA[Reply to Ulu (Uluit) on Thu, 13 Dec 2018 00:21:15 GMT]]></title><description><![CDATA[<p dir="auto"><a href="https://www.youtube.com/watch?v=d3QoYxy5bZA" rel="nofollow ugc">https://www.youtube.com/watch?v=d3QoYxy5bZA</a></p>
]]></description><link>https://multitool.ninja/post/1827428</link><guid isPermaLink="true">https://multitool.ninja/post/1827428</guid><dc:creator><![CDATA[SteveC]]></dc:creator><pubDate>Thu, 13 Dec 2018 00:21:15 GMT</pubDate></item><item><title><![CDATA[Reply to Ulu (Uluit) on Tue, 11 Dec 2018 16:22:21 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/aloha" aria-label="Profile: Aloha007">@<bdi>Aloha007</bdi></a> <a href="/post/1822666">said</a>:<br />
I cooked professionally and have not seen nor heard of these knives.  She's certainly handy with that blade and comes across wonderfully with her dedication to her culture and skill.  Good info.</p>
</blockquote>
<p dir="auto">+1</p>
<p dir="auto"><img src="/assets/uploads/smileys/hatsoff.gif" alt=":hatsoff:" title="Hats Off" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /> <img src="/assets/uploads/smileys/541.gif" alt=":tu:" title="Thumbs up!" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1826318</link><guid isPermaLink="true">https://multitool.ninja/post/1826318</guid><dc:creator><![CDATA[pfrsantos]]></dc:creator><pubDate>Tue, 11 Dec 2018 16:22:21 GMT</pubDate></item><item><title><![CDATA[Reply to Ulu (Uluit) on Sun, 09 Dec 2018 12:03:38 GMT]]></title><description><![CDATA[<p dir="auto">I know what you mean about your hands buddy! <img src="/assets/uploads/smileys/facepalm.gif" alt=":facepalm:" title="Facepalm" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1824386</link><guid isPermaLink="true">https://multitool.ninja/post/1824386</guid><dc:creator><![CDATA[Barry Rowland]]></dc:creator><pubDate>Sun, 09 Dec 2018 12:03:38 GMT</pubDate></item></channel></rss>