<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0"><channel><title><![CDATA[SAK Spring Questions]]></title><description><![CDATA[<p dir="auto">Some spring questions please. Apologies if they seem simplistic.</p>
<ol>
<li>Can the corkscrew attach to any spring other than that of the knife layer? I don't like an off centre line blade and would love to move the layer to the centre line but I do like having a corkscrew.</li>
<li>Can anything fit opposite the inline phillips other than the magnifier?</li>
<li>Is there room for anything on the back of the phillips/magnifier s spring? (I don't have a SAK with this layer otherwise I could just look :D )</li>
<li>Can anything other than the hook go on the back of the scissors spring?</li>
</ol>
<p dir="auto">I'm sure I'll think of more questions as time goes on but that's it for the moment.</p>
<p dir="auto">Thanks!  <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/topic/81337/sak-spring-questions</link><generator>RSS for Node</generator><lastBuildDate>Thu, 19 Nov 2026 22:35:13 GMT</lastBuildDate><atom:link href="https://multitool.ninja/topic/81337.rss" rel="self" type="application/rss+xml"/><pubDate>Tue, 23 Apr 2019 18:46:31 GMT</pubDate><ttl>60</ttl><item><title><![CDATA[Reply to SAK Spring Questions on Thu, 30 May 2019 08:11:13 GMT]]></title><description><![CDATA[<p dir="auto">Glad you like the layout! <img src="/assets/uploads/smileys/thumbsup.gif" alt=":2tu:" title="2 thumbs up" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1941647</link><guid isPermaLink="true">https://multitool.ninja/post/1941647</guid><dc:creator><![CDATA[Don Pablo]]></dc:creator><pubDate>Thu, 30 May 2019 08:11:13 GMT</pubDate></item><item><title><![CDATA[Reply to SAK Spring Questions on Wed, 29 May 2019 16:39:45 GMT]]></title><description><![CDATA[<p dir="auto">Just finished sharpening it up, I don't care what happens, I'm not giving up centre line blades! It's such a joy to use! I've only been carrying single layer pocket knives for that reason. Once the blades move back to centre line it makes such a difference in how easy it is to hold and work with those blades. I'm revising my next version of this build. I'll leave the hook with the scissors and keep the awl on the back of the blades. I use the corkscrew for undoing knots and the awl works for that task if blunted. I'll do this sooner rather than later. I have all the parts including the spare liner and the extra collars I'll probably need by the time I've had the pins drilled out again on this knife. Only annoying thing is that the scales I ordered have the corkscrew slot. In any case it ain't over until the fat lady sings! <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1941329</link><guid isPermaLink="true">https://multitool.ninja/post/1941329</guid><dc:creator><![CDATA[pomsbz]]></dc:creator><pubDate>Wed, 29 May 2019 16:39:45 GMT</pubDate></item><item><title><![CDATA[Reply to SAK Spring Questions on Wed, 29 May 2019 16:31:52 GMT]]></title><description><![CDATA[<p dir="auto">Had a thought of a variation of this mod. Basically a Pioneer X with the big/small blade from a 91mm. I prefer the thinner main blade which don't have the rather noticeable crinking of the Pioneers and I don't need an awl. How possible might that be? Would the blade spring work without something on its back to tension it? I also haven't a clue how to peen the pins on a alox model, how do you do it without wrecking the alox bumps on the handles?</p>
]]></description><link>https://multitool.ninja/post/1941302</link><guid isPermaLink="true">https://multitool.ninja/post/1941302</guid><dc:creator><![CDATA[pomsbz]]></dc:creator><pubDate>Wed, 29 May 2019 16:31:52 GMT</pubDate></item><item><title><![CDATA[Reply to SAK Spring Questions on Wed, 29 May 2019 15:11:24 GMT]]></title><description><![CDATA[<p dir="auto">Ingenious! <img src="/assets/uploads/smileys/like-sign.gif" alt=":like:" title="I like this" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1941287</link><guid isPermaLink="true">https://multitool.ninja/post/1941287</guid><dc:creator><![CDATA[Don Pablo]]></dc:creator><pubDate>Wed, 29 May 2019 15:11:24 GMT</pubDate></item><item><title><![CDATA[Reply to SAK Spring Questions on Wed, 29 May 2019 14:50:56 GMT]]></title><description><![CDATA[<p dir="auto">Nice mod pomsbz  <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /> Good to see some different tool configs - nicely done.</p>
]]></description><link>https://multitool.ninja/post/1941281</link><guid isPermaLink="true">https://multitool.ninja/post/1941281</guid><dc:creator><![CDATA[magentus]]></dc:creator><pubDate>Wed, 29 May 2019 14:50:56 GMT</pubDate></item><item><title><![CDATA[Reply to SAK Spring Questions on Wed, 29 May 2019 14:47:50 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/comis" aria-label="Profile: comis">@<bdi>comis</bdi></a> <a href="/post/1941277">said</a>:<br />
<img src="/assets/uploads/smileys/rofl.gif" alt=":rofl:" title="rofl" class="forum-smiley emoji" />  Ok, roger that.  But do put up the new scale photo though.  :D</p>
</blockquote>
<p dir="auto">You bet!</p>
<p dir="auto">Thanks to both you and kottskappa!</p>
]]></description><link>https://multitool.ninja/post/1941279</link><guid isPermaLink="true">https://multitool.ninja/post/1941279</guid><dc:creator><![CDATA[pomsbz]]></dc:creator><pubDate>Wed, 29 May 2019 14:47:50 GMT</pubDate></item><item><title><![CDATA[Reply to SAK Spring Questions on Wed, 29 May 2019 14:45:06 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/pomsbz" aria-label="Profile: pomsbz">@<bdi>pomsbz</bdi></a> <a href="/post/1941268">said</a>:<br />
Don't hold your breath.  <img src="/assets/uploads/smileys/rofl.gif" alt=":rofl:" title="rofl" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto"><img src="/assets/uploads/smileys/rofl.gif" alt=":rofl:" title="rofl" class="forum-smiley emoji" />  Ok, roger that.  But do put up the new scale photo though.  :D</p>
]]></description><link>https://multitool.ninja/post/1941277</link><guid isPermaLink="true">https://multitool.ninja/post/1941277</guid><dc:creator><![CDATA[comis]]></dc:creator><pubDate>Wed, 29 May 2019 14:45:06 GMT</pubDate></item><item><title><![CDATA[Reply to SAK Spring Questions on Wed, 29 May 2019 14:36:00 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/comis" aria-label="Profile: comis">@<bdi>comis</bdi></a> <a href="/post/1941267">said</a>:<br />
Good job!  It looks pretty good as is <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /> , I look forward to its next evolution!  <img src="/assets/uploads/smileys/popcorn.gif" alt=":popcorn:" title="Popcorn" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">Don't hold your breath.  <img src="/assets/uploads/smileys/rofl.gif" alt=":rofl:" title="rofl" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1941268</link><guid isPermaLink="true">https://multitool.ninja/post/1941268</guid><dc:creator><![CDATA[pomsbz]]></dc:creator><pubDate>Wed, 29 May 2019 14:36:00 GMT</pubDate></item><item><title><![CDATA[Reply to SAK Spring Questions on Wed, 29 May 2019 14:35:08 GMT]]></title><description><![CDATA[<p dir="auto">Good job!  It looks pretty good as is <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /> , I look forward to its next evolution!  <img src="/assets/uploads/smileys/popcorn.gif" alt=":popcorn:" title="Popcorn" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1941267</link><guid isPermaLink="true">https://multitool.ninja/post/1941267</guid><dc:creator><![CDATA[comis]]></dc:creator><pubDate>Wed, 29 May 2019 14:35:08 GMT</pubDate></item><item><title><![CDATA[Reply to SAK Spring Questions on Wed, 29 May 2019 14:32:29 GMT]]></title><description><![CDATA[<p dir="auto">Nice work and Awsome mod!</p>
<p dir="auto">[It's not failure if you learn something from it]</p>
]]></description><link>https://multitool.ninja/post/1941266</link><guid isPermaLink="true">https://multitool.ninja/post/1941266</guid><dc:creator><![CDATA[kottskrapa]]></dc:creator><pubDate>Wed, 29 May 2019 14:32:29 GMT</pubDate></item><item><title><![CDATA[Reply to SAK Spring Questions on Wed, 29 May 2019 14:29:09 GMT]]></title><description><![CDATA[<p dir="auto">Here it goes folks. Just needs to be sharpened back up now. Oh and the custom scales I ordered for it haven't arrived yet, these are some old nylon scales for the moment.</p>
<p dir="auto"><img src="http://www.timelessjewishart.com/EDC_zx/explorermod_7.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">3 layer, blades centre line, inline screwdriver. Pretty much my perfect urban SAK EDC.</p>
<p dir="auto">I'm happy about most of it. The bottle opener sits a drop high but isn't uncomfortable in hand. The biggest 'problem' is the scissors layer. It doesn't sit well with the corkscrew which sits a bit proud but again not enough to dig into the hand. I didn't realise prior to dismantling but the hook creates the correct strain on the scissors spring to provide the snap. Without the hook it closes lazily unless the corkscrew is open. Again, not enough to be any problem in use. I'm sure someone with the skill set could modify the spring to fix both problems but I did the entire mod using the bottle opener on a 111mm, my LM Charge pliers/file and a hammer. Hardly high tech.  :D</p>
<p dir="auto">What will I do next time? I'd probably keep the blades where they belong (on the side) with the corkscrew and put the awl on the scissors layer. I'd also be a drop more careful with my spacer under the bottle opener for a more precise fit.</p>
]]></description><link>https://multitool.ninja/post/1941261</link><guid isPermaLink="true">https://multitool.ninja/post/1941261</guid><dc:creator><![CDATA[pomsbz]]></dc:creator><pubDate>Wed, 29 May 2019 14:29:09 GMT</pubDate></item><item><title><![CDATA[Reply to SAK Spring Questions on Tue, 28 May 2019 19:17:37 GMT]]></title><description><![CDATA[<p dir="auto">This is satisfying and I can't wait for the results! I really enjoy reading and seeing pics of people solving problems</p>
<p dir="auto">[It's not failure if you learn something from it]</p>
]]></description><link>https://multitool.ninja/post/1940760</link><guid isPermaLink="true">https://multitool.ninja/post/1940760</guid><dc:creator><![CDATA[kottskrapa]]></dc:creator><pubDate>Tue, 28 May 2019 19:17:37 GMT</pubDate></item><item><title><![CDATA[Reply to SAK Spring Questions on Tue, 28 May 2019 18:06:55 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/comis" aria-label="Profile: comis">@<bdi>comis</bdi></a> <a href="/post/1940695">said</a>:<br />
I don't know whether this will help, but do you think it is possible to make a hole on the outside liner, then peen a rivet spacer right under the flathead, then on the other side of the liner, just peen it as flat as possible and make minor changes to the scale?</p>
</blockquote>
<p dir="auto">You're assuming I have a drill :D</p>
<p dir="auto">I did this in the end, cut up a bike wheel spoke and super glued the pieces in. It's a drop high, I'm filing down the 'kick' of the bottle opener at present.</p>
<p dir="auto"><img src="http://www.timelessjewishart.com/EDC_zx/explorermod_6.jpg" alt="" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/1940700</link><guid isPermaLink="true">https://multitool.ninja/post/1940700</guid><dc:creator><![CDATA[pomsbz]]></dc:creator><pubDate>Tue, 28 May 2019 18:06:55 GMT</pubDate></item><item><title><![CDATA[Reply to SAK Spring Questions on Tue, 28 May 2019 18:01:34 GMT]]></title><description><![CDATA[<p dir="auto">I don't know whether this will help, but do you think it is possible to make a hole on the outside liner, then peen a rivet spacer right under the flathead, then on the other side of the liner, just peen it as flat as possible and make minor changes to the scale?</p>
]]></description><link>https://multitool.ninja/post/1940695</link><guid isPermaLink="true">https://multitool.ninja/post/1940695</guid><dc:creator><![CDATA[comis]]></dc:creator><pubDate>Tue, 28 May 2019 18:01:34 GMT</pubDate></item><item><title><![CDATA[Reply to SAK Spring Questions on Tue, 28 May 2019 16:09:17 GMT]]></title><description><![CDATA[<p dir="auto">A friend suggested sugru but it's hard to get it perfectly sized in time. I was thinking some kind of plastic which I can shave to size?</p>
]]></description><link>https://multitool.ninja/post/1940621</link><guid isPermaLink="true">https://multitool.ninja/post/1940621</guid><dc:creator><![CDATA[pomsbz]]></dc:creator><pubDate>Tue, 28 May 2019 16:09:17 GMT</pubDate></item><item><title><![CDATA[Reply to SAK Spring Questions on Tue, 28 May 2019 14:06:11 GMT]]></title><description><![CDATA[<p dir="auto">Hi folks,</p>
<p dir="auto">Update! Finally got started, going really well so far! I have the scissors on the outside with corkscrew on their back (isn't a perfect fit with the corkscrew, spring isn't designed for it, but certainly good enough). The two blades are centre line with the awl on the back of them. My problem is with the next layer as shown (and predicted by the Don). Getting a spacer isn't the problem (going to use the spacer from the small blade donated by a spartan), neither are the lengths, they work fine. It's getting the bottle opener up sufficiently for opening on a spring designed to let it droop down all the way.</p>
<p dir="auto">Here is a pic showing the problem:</p>
<p dir="auto"><img src="http://www.timelessjewishart.com/EDC_zx/explorermod_2.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">Proof of solution concept using match sticks</p>
<p dir="auto"><img src="http://www.timelessjewishart.com/EDC_zx/explorermod_1.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">With the 'solution' the nail nicks line up perfecty.</p>
<p dir="auto"><img src="http://www.timelessjewishart.com/EDC_zx/explorermod.jpg" alt="" class="img-markdown  img-fluid" /></p>
<p dir="auto">I do wish however that I had a better long term solution than matchsticks! Incidentally I need to do the same thing for the awl, it drops down under the liners with the blade spring. Any ideas at all? Should I find some metal and file it down then stick it in place or is there a better/easier option to be had?</p>
<p dir="auto">Thanks!</p>
]]></description><link>https://multitool.ninja/post/1940524</link><guid isPermaLink="true">https://multitool.ninja/post/1940524</guid><dc:creator><![CDATA[pomsbz]]></dc:creator><pubDate>Tue, 28 May 2019 14:06:11 GMT</pubDate></item><item><title><![CDATA[Reply to SAK Spring Questions on Tue, 07 May 2019 19:20:19 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/comis" aria-label="Profile: comis">@<bdi>comis</bdi></a> <a href="/post/1928268">said</a>:<br />
All along I was thinking to put both bottle opener/can opener side-by-side(opposite to inline phillips), like what Syph usually do on a 93mm mod...is that not achievable with dual opener springs or phillps spring?  <img src="/assets/uploads/smileys/thinking.gif" alt=":think:" title="Thinking" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">On a 93mm, Syph flips one of the springs around, so that an end for a bottle opener, and an end for a can opener, are on the same end of the knife, if you can visualise what I mean.<br />
That way, he can put the bottle opener and can opener side-by-side.<br />
You can't do that on a 91mm, because unlike 93mm, the pin locations are not symmetrical.</p>
]]></description><link>https://multitool.ninja/post/1928285</link><guid isPermaLink="true">https://multitool.ninja/post/1928285</guid><dc:creator><![CDATA[Don Pablo]]></dc:creator><pubDate>Tue, 07 May 2019 19:20:19 GMT</pubDate></item><item><title><![CDATA[Reply to SAK Spring Questions on Tue, 07 May 2019 19:05:19 GMT]]></title><description><![CDATA[<p dir="auto">All along I was thinking to put both bottle opener/can opener side-by-side(opposite to inline phillips), like what Syph usually do on a 93mm mod...is that not achievable with dual opener springs or phillps spring?  <img src="/assets/uploads/smileys/thinking.gif" alt=":think:" title="Thinking" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/post/1928268</link><guid isPermaLink="true">https://multitool.ninja/post/1928268</guid><dc:creator><![CDATA[comis]]></dc:creator><pubDate>Tue, 07 May 2019 19:05:19 GMT</pubDate></item><item><title><![CDATA[Reply to SAK Spring Questions on Tue, 07 May 2019 18:50:12 GMT]]></title><description><![CDATA[<p dir="auto">Thank you for all the photos, I too am interested in this.</p>
<p dir="auto">Just for reference sake, I did a quick comparison between pretty old screw drivers(from a swisschamp with fluted corkscrew) vs a new screwdriver.</p>
<p dir="auto">The new inline phillips sit about 1mm higher than the can opener, and the older one is almost 5mm longer than the new one(which is significant)</p>
]]></description><link>https://multitool.ninja/post/1928254</link><guid isPermaLink="true">https://multitool.ninja/post/1928254</guid><dc:creator><![CDATA[comis]]></dc:creator><pubDate>Tue, 07 May 2019 18:50:12 GMT</pubDate></item><item><title><![CDATA[Reply to SAK Spring Questions on Tue, 07 May 2019 17:19:23 GMT]]></title><description><![CDATA[<p dir="auto">Just measured, the difference in width between the magnifier and the bottle opener is 0.5mm (though the spring width difference is a full mm), that should be easy to achieve with a spacer?</p>
]]></description><link>https://multitool.ninja/post/1928206</link><guid isPermaLink="true">https://multitool.ninja/post/1928206</guid><dc:creator><![CDATA[pomsbz]]></dc:creator><pubDate>Tue, 07 May 2019 17:19:23 GMT</pubDate></item><item><title><![CDATA[Reply to SAK Spring Questions on Tue, 07 May 2019 16:48:07 GMT]]></title><description><![CDATA[<p dir="auto">The problem I hadn't thought of is the difference in width. Not sure how to deal with that. Perhaps if I put the bottle opener on the screwdriver layer with a spacer of some kind and some solder on the spring underneath to keep it propped up? I really want to keep it at 3 layer thickness.</p>
<p dir="auto">You have to forgive me, I'm not very good at this kind of thing.</p>
]]></description><link>https://multitool.ninja/post/1928202</link><guid isPermaLink="true">https://multitool.ninja/post/1928202</guid><dc:creator><![CDATA[pomsbz]]></dc:creator><pubDate>Tue, 07 May 2019 16:48:07 GMT</pubDate></item><item><title><![CDATA[Reply to SAK Spring Questions on Tue, 07 May 2019 16:42:51 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto">@Don Pablo <a href="/post/1928187">said</a>:<br />
The first pic shows how much of the bottle opener you need to shorten to make it fit with the old-style Phillips. I believe the new style Phillips is shorter, so you don't need to cut as much!  <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /></p>
<p dir="auto">The second pic shows how the bottle opener will sink if you try using it on the Phillips spring...  :-\</p>
<p dir="auto">The third picture shows you how much the Phillips will sink on two opener springs. Looks manageable?  <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">First of all, thank you, that's a huge help! Here is a photo of my explorer, I don't think I'll have to remove much off the bottle opener which is useful.</p>
<p dir="auto"><img src="http://www.timelessjewishart.com/EDC_zx/screwdriver.jpg" alt="" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/1928199</link><guid isPermaLink="true">https://multitool.ninja/post/1928199</guid><dc:creator><![CDATA[pomsbz]]></dc:creator><pubDate>Tue, 07 May 2019 16:42:51 GMT</pubDate></item><item><title><![CDATA[Reply to SAK Spring Questions on Tue, 07 May 2019 16:19:45 GMT]]></title><description><![CDATA[<p dir="auto">The first pic shows how much of the bottle opener you need to shorten to make it fit with the old-style Phillips. I believe the new style Phillips is shorter, so you don't need to cut as much!  <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /></p>
<p dir="auto">The second pic shows how the bottle opener will sink if you try using it on the Phillips spring...  :-\</p>
<p dir="auto">The third picture shows you how much the Phillips will sink on two opener springs. Looks manageable?  <img src="/assets/uploads/smileys/cheers.gif" alt=":cheers:" title=":cheers:" class="forum-smiley emoji" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/432697_IMG_20190507_170520.jpg" alt="IMG_20190507_170520.jpg" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/432699_IMG_20190507_170547.jpg" alt="IMG_20190507_170547.jpg" class="img-markdown  img-fluid" /></p>
<p dir="auto"><img src="/assets/uploads/_imported_attachments/migrated/432701_IMG_20190507_171931.jpg" alt="IMG_20190507_171931.jpg" class="img-markdown  img-fluid" /></p>
]]></description><link>https://multitool.ninja/post/1928187</link><guid isPermaLink="true">https://multitool.ninja/post/1928187</guid><dc:creator><![CDATA[Don Pablo]]></dc:creator><pubDate>Tue, 07 May 2019 16:19:45 GMT</pubDate></item><item><title><![CDATA[Reply to SAK Spring Questions on Tue, 07 May 2019 14:58:27 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto">@Don Pablo <a href="/post/1928134">said</a>:<br />
<img src="/assets/uploads/smileys/popcorn.gif" alt=":popcorn:" title="Popcorn" class="forum-smiley emoji" /></p>
</blockquote>
<p dir="auto">I've worked out that I have to find a second corkscrew liner to have the corkscrew span two layers (it's actually a bit more, 2.5 layers, has to still stick out the side a bit, it's width is 8mm vs 6mm of two layers). I may have to sacrifice a 2nd hand Spartan. :) I'm also still unsure of how well the bottle opener will work in place of the magnifier or whether I have to use the opener spring and then see if the screwdriver will work in place of the can opener. I won't know till I open them I think. The second option would give me an awl at least. If anyone has any information about that question I'd love to hear from experience!</p>
]]></description><link>https://multitool.ninja/post/1928149</link><guid isPermaLink="true">https://multitool.ninja/post/1928149</guid><dc:creator><![CDATA[pomsbz]]></dc:creator><pubDate>Tue, 07 May 2019 14:58:27 GMT</pubDate></item></channel></rss>