<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0"><channel><title><![CDATA[Bit kits, in general]]></title><description><![CDATA[<p dir="auto">Must be a well-hashed subject: Driver bit kits that come with name-brand multitools. Often so soft as to be useless. Especially the flathead or slot driver bits.</p>
<p dir="auto">The Phillips bits have more bulk, and bulwark. But can strip long before screw heads.</p>
<p dir="auto">Why?!  I am not alone in finding the lack of quality bits an absolute travesty. Do they assume most people will not use the bits?  Ah...</p>
<p dir="auto">And of course bits are not usually under warranty.</p>
<p dir="auto">I can buy a cheap set for a few sheqels. Pot metal bits from China. Bend if you scowl at them. Dissolve if you actually growl audibly.  A genuinely durable set though would be worth  good money. I have some 40+ year old bits for my drill, a bit worn but still good. My Gerber CenterDrive slot head driver bits twisted first time out. A tool sold as the ultimate multitool driver platform! Oi vey iz meer.</p>
<p dir="auto">Leatherman bit kit not much better. Torx and Phillips better than slots, but not great.</p>
<p dir="auto">Surely the engineers must test, or chose not to test, or see the dreck and pass it anyway.</p>
<p dir="auto">Like with shattered wire cutters, bit kits on our ticket--or are they warranty covered? Sheaths not coveted, ok. But actual tool parts accessories?</p>
<p dir="auto">I feel seriously had by most bit kits. Especially given the selling point of the highly touted CenterDrive, and LM bit exchangers.<br />
<img src="/assets/uploads/smileys/shrugging.gif" alt=":dunno:" title="I dunno" class="forum-smiley emoji" /></p>
]]></description><link>https://multitool.ninja/topic/81671/bit-kits-in-general</link><generator>RSS for Node</generator><lastBuildDate>Thu, 19 Nov 2026 22:39:14 GMT</lastBuildDate><atom:link href="https://multitool.ninja/topic/81671.rss" rel="self" type="application/rss+xml"/><pubDate>Sat, 25 May 2019 18:32:33 GMT</pubDate><ttl>60</ttl><item><title><![CDATA[Reply to Bit kits, in general on Tue, 28 May 2019 18:10:12 GMT]]></title><description><![CDATA[<p dir="auto">I replaced all the “multitool-bit-sets” - I have some from leatherman and some from Victorinox. Only old leatherman bits were great (they came with the tool adapter).</p>
<p dir="auto">Today there are only 4 brands I trust in for EDC and working tasks - Wera, Wiha, Hazet and Stahlwille...</p>
]]></description><link>https://multitool.ninja/post/1940705</link><guid isPermaLink="true">https://multitool.ninja/post/1940705</guid><dc:creator><![CDATA[CeHo]]></dc:creator><pubDate>Tue, 28 May 2019 18:10:12 GMT</pubDate></item><item><title><![CDATA[Reply to Bit kits, in general on Mon, 27 May 2019 13:51:16 GMT]]></title><description><![CDATA[<p dir="auto">All Bits are really just disposable.</p>
<p dir="auto">Some are just more easily disposable than others! <img src="/assets/uploads/smileys/whistle.gif" alt=":whistle:" title="Whistle" class="forum-smiley emoji" /></p>
<p dir="auto">I am not too sure if the ones that have a bad fit are the fault of the bit or the terrible fasteners we tend to see more often these days?</p>
]]></description><link>https://multitool.ninja/post/1939786</link><guid isPermaLink="true">https://multitool.ninja/post/1939786</guid><dc:creator><![CDATA[ezdog]]></dc:creator><pubDate>Mon, 27 May 2019 13:51:16 GMT</pubDate></item><item><title><![CDATA[Reply to Bit kits, in general on Mon, 27 May 2019 08:17:45 GMT]]></title><description><![CDATA[<p dir="auto">The "free" bit kits you get with tools/tool kits (usually to round out the number of "tools" on offer - 99 piece tool kit! - 20 of which are hex bits, 16 of which you'll never use.) are generally pretty crappy (probably because they are made by companies that don't necessarily speSmurfpillse in that field)</p>
<p dir="auto">All my good bits are ones I've bought individually, around $2 each. I'll save myself a trip and go from guess/memory, I think they are mostly Irwin or Sutton branded.</p>
<p dir="auto">I have no idea who makes the ones for the Centredrive, whether Gerber outsourced to a reputable company, or just ordered a million from wherever and stuck the gerber label on them.</p>
]]></description><link>https://multitool.ninja/post/1939648</link><guid isPermaLink="true">https://multitool.ninja/post/1939648</guid><dc:creator><![CDATA[Sea Monster]]></dc:creator><pubDate>Mon, 27 May 2019 08:17:45 GMT</pubDate></item><item><title><![CDATA[Reply to Bit kits, in general on Mon, 27 May 2019 07:23:22 GMT]]></title><description><![CDATA[<blockquote>
<p dir="auto"><a class="plugin-mentions-user plugin-mentions-a" href="/user/israelpiper" aria-label="Profile: israelpiper">@<bdi>israelpiper</bdi></a> <a href="/post/1939618">said</a>:<br />
..Why not include excellent bit drivers?</p>
<p dir="auto">The tiny eye glass driver in my LM bit kit broke first time out. On my sunglasses.</p>
</blockquote>
<p dir="auto">Excellent sunglasses at least!  :D</p>
]]></description><link>https://multitool.ninja/post/1939642</link><guid isPermaLink="true">https://multitool.ninja/post/1939642</guid><dc:creator><![CDATA[Vidar]]></dc:creator><pubDate>Mon, 27 May 2019 07:23:22 GMT</pubDate></item><item><title><![CDATA[Reply to Bit kits, in general on Mon, 27 May 2019 04:57:10 GMT]]></title><description><![CDATA[<p dir="auto">Yes, good bit sets are out there. But the issue I have, more than any other, is the softness of the bits sold with CenterDrive. Especially the smaller slotheads.  But even my LM bit kit slots are a "bit" soft.</p>
<p dir="auto">I have a Korean small bit set that has held up well. But if you sell the bit driver function as a major selling point, then why not sell excellent bits.</p>
<p dir="auto">LM is better than Gerber. Still, the slot drivers twist too easily. Why not include excellent bit drivers?</p>
<p dir="auto">The tiny eye glass driver in my LM bit kit broke first time out. On my sunglasses.</p>
]]></description><link>https://multitool.ninja/post/1939618</link><guid isPermaLink="true">https://multitool.ninja/post/1939618</guid><dc:creator><![CDATA[israelpiper]]></dc:creator><pubDate>Mon, 27 May 2019 04:57:10 GMT</pubDate></item><item><title><![CDATA[Reply to Bit kits, in general on Sun, 26 May 2019 01:13:53 GMT]]></title><description><![CDATA[<p dir="auto">**My experience with 'bit-kits' is "pay-a-littlle-more-to-get-a-little-more".  <em>Impact-rated</em> are a reasonable-choice, if you drive a lot of fasteners into decks, and drywall.  For general usage stick with the decent, domestic marques like S&amp;K, Snap-On, or Proto.  They are properly-hardened and heat-treated.  Lately, I've been really impressed by the euro-brands like:  Wera, Wiha, and Felo.     **</p>
]]></description><link>https://multitool.ninja/post/1939062</link><guid isPermaLink="true">https://multitool.ninja/post/1939062</guid><dc:creator><![CDATA[eTripper]]></dc:creator><pubDate>Sun, 26 May 2019 01:13:53 GMT</pubDate></item><item><title><![CDATA[Reply to Bit kits, in general on Sat, 25 May 2019 20:13:38 GMT]]></title><description><![CDATA[<p dir="auto">Dewalt here, and my main knife using bits, the Opinel DIY has two in the handle (Phillips and flat). But they don't make anything like T-27 (which is a necessity if you've ever worked on anything by Stihl); just stuff you'll typically see in construction. I plan to eventually switch to Wera/Wiha.  It's just Granddad buys Dewalt bit sets every time they're on sale, and I have a huge stock of Phillips bits at my hands.</p>
<p dir="auto">The key to buying bits in my opinion is to look for "Impact Rated". "Power Driver Bit Set" like often seen on the POS pot metal sets from your local supermarket is meaningless. And for MT bits, if it doesn't accept standard 1/4 without any kind of adapter, forget about it. But I do have an LM bit kit (which if you're like me, and own the Surge, Wave, and Skeletool; you've got to have it), and it seems the bits do work. Used the T-27 bit out of it some time ago, and put a lot of torque on it. In fact, the job broke the cheap Craftsman offset screwdriver, but the LM bit still looked new.</p>
]]></description><link>https://multitool.ninja/post/1938959</link><guid isPermaLink="true">https://multitool.ninja/post/1938959</guid><dc:creator><![CDATA[cody6268]]></dc:creator><pubDate>Sat, 25 May 2019 20:13:38 GMT</pubDate></item><item><title><![CDATA[Reply to Bit kits, in general on Sat, 25 May 2019 19:06:11 GMT]]></title><description><![CDATA[<p dir="auto">I can't really comment on the multi-tool bits in particular, but my general experience is that you get what you pay for. There are good bits out there but they cost more - and there are sets with 30-120 bits for a few dollars that works for a while. For those ones I try to throw them away and replace before they go so bad as to damage a screw head.</p>
<p dir="auto">I might remember wrong, but I think the bit standard specifications calls for a HRC hardness of 55 or so. I suspect many bits are softer than that though.</p>
]]></description><link>https://multitool.ninja/post/1938923</link><guid isPermaLink="true">https://multitool.ninja/post/1938923</guid><dc:creator><![CDATA[Vidar]]></dc:creator><pubDate>Sat, 25 May 2019 19:06:11 GMT</pubDate></item><item><title><![CDATA[Reply to Bit kits, in general on Sat, 25 May 2019 18:57:39 GMT]]></title><description><![CDATA[<p dir="auto">I drive screws with my LM bit kit hundreds of times a week. Haven't damaged any of the LM kit bits yet. And, I'd like to add, I drive a lot of screws into undrilled oak, which is really hard on the bits. Maybe I got lucky with my sets. <img src="/assets/uploads/smileys/thinking.gif" alt=":think:" title="Thinking" class="forum-smiley emoji" /><br />
I haven't used the bits that come with the CD, and use aftermarket bits instead, so can't speak to those. <img src="/assets/uploads/smileys/shrugging.gif" alt=":dunno:" title="I dunno" class="forum-smiley emoji" /></p>
<p dir="auto">There is always the fact that you can put several times more turning force on multitool drivers than regular round handled drivers.</p>
]]></description><link>https://multitool.ninja/post/1938920</link><guid isPermaLink="true">https://multitool.ninja/post/1938920</guid><dc:creator><![CDATA[gerleatherberman]]></dc:creator><pubDate>Sat, 25 May 2019 18:57:39 GMT</pubDate></item></channel></rss>